How to remotely enable mobile internet on iPhone. How to turn mobile (cellular) Internet or Wi-Fi on and off on iPhone and iPad

Apple produces high-end smartphones, but this does not exclude the problem that gadget users sometimes face - the Internet does not work on iPhone. The problem occurs with different mobile operators. Most often, this is due to incorrect settings, but there are also more serious reasons. be guided simple instructions to understand why the Internet sometimes does not work well on smartphones and how you can troubleshoot an iPhone yourself.

How to identify the problem

Problems with unlimited mobile Internet are easy to distinguish from any others. The main symptoms of problems:

• you can't go online on your iPhone (via 3G, LTE or Wi-Fi)
• tethering mode does not turn on (or the iPhone does not work as a point WiFi access)
• Internet is intermittent or there is a connection icon on the screen mobile phone pages not showing

If you encounter a system error, just restart your smartphone - after enabling the unlimited Internet function, it should work as usual. Switching to Airplane mode and then returning to normal mode also sometimes helps. If simple steps did not help, the error should be looked for in the phone settings, software or hardware.

Why did LTE stop turning on

The reasons why the Internet does not work on an iPhone are different. The most common problems faced by iPhone users are:

• parameter error wireless network or 3G connection
• iOS system error
• iPhone hardware failure
• incorrect operation of the SIM card

In most cases (especially when it comes to software problems), you can fix the situation yourself.

There is network coverage, but the Internet does not work

Errors in the LTE connection most often come from the mobile operator. As a rule, a similar problem occurs after a hard reboot of the device or a factory reset. Even with good coverage Unlimited Internet networks may not function. It is easy to distinguish this problem from others - the cellular antenna is displayed in the status bar, but the icon disappears. The following steps will help correct the situation:

• go to iphone settings
• select Cellular tab
• find the "Data transfer" menu
• print the APN and username, after checking them with your mobile operator

However, before checking the settings, make sure that you have paid for the Internet, have network coverage, and the operator provides this service. Ask for details about tariffs for mobile communications. If your Internet often does not work correctly, discuss technical assistance with your mobile operator. Some users, in order to eliminate problems that arise, change their mobile operator to a more suitable one.

If the 3G icon is missing

When the 3G icon in the status bar is displayed, but the browser does not load pages, you should rule out a problem with the browser. The easiest way is to download all the proposed updates to the application or delete it and install it again. If you are using a standard browser, try the following steps:

• disable javascript in browser
• reboot phone (Power+Home)
• close the browser by double tapping the home key and swiping up on the app tab

Many iPhone owners faced poor loading of pages and clicking on links after the update. operating system up to version 9.3. iOS system update to latest version will help solve the problem.

The methods described above are relevant only if the problem is caused by a browser error, and there are no problems with LTE mobile communications on the part of the mobile operator. If the network or cellular data icon still disappears, you should look for other reasons.

Data network problems

You may not be able to connect to the internet if your cellular data network is turned off. Look in the parameters of the mobile phone - if it is disabled, then the icon in the status bar disappears. To connect a network, follow these steps:

• go to connection settings menu
• make sure that in the items "Cellular data" and "Enable 3G" the slider is in the activated state
• turn on cellular data if necessary

Even if the cellular connection worked properly, the coverage of the cellular network may be different, which is why the smartphone does not receive a signal everywhere. Operators cannot provide equally good cellular reception in different parts cities. If the 3G icon changes to E or H+, this is not considered a problem.

How to enable tethering

If Mobile Internet your smartphone does not function in tethering mode, or the unit does not allow you to connect to the network in access point mode, make sure that the corresponding function is enabled. To do this is simple:

• go to settings menu
• select "Tethering Mode" or "Cellular Data" - "Tethering Mode"
• move the slider to the on position
• check the settings and the password that your mobile phone will generate

If everything is in order, you should restart your phone. Normally, the modem mode function is then restored. The same actions are recommended to be performed in the absence of the possibility of creating access. Another way is to reset the settings to factory settings and then enter all the parameters manually.

What to do if the smartphone stops receiving cellular communication

If you rebooted your phone and even reset it to factory settings, but the problems still persist (the 3G icon is missing in the status bar, there is no Internet access), the problem may lie in the hardware of the smartphone. Repairing a wireless module or other elements on your own can lead to damage to the manufacturer’s seals, so it’s better to contact a service center with iPhones under warranty.

If you are a happy owner of a new iPhone, then you can't wait to try out all its features and most importantly, find out how you can turn the Internet on or off.

Now it is difficult to imagine your usual day without the Internet at all, one way or another we need it: for work, study, just entertainment.

In today's material, I will not delve into some complicated details of setting up the Internet on your iPhone. I'll just go over the most basic aspects that will help you get the most out of your brand new iPhone.

How to connect / turn off the Internet on iPhone

So as you know there is different ways how you can enter the wonderful and unique world of the Internet. There are only two of them on the iPhone, as elsewhere.

Before moving on to the instructions, I’ll talk a little about the pros if you use your iPhone to surf the Internet:

• always the best modems;
• support for the latest standards;
• ease of connection.

Now let's deal with each method separately. I will sign everything in sufficient detail so that there are no further questions (I used the latest iOS 10.1.1).

Wi-Fi has always been the easiest and free way to use the Internet on iPhone. It can be found everywhere, because now you can find free Wi-Fi in almost any cafe.

Apple devices are always difficult enough to get to know, only then after a couple of weeks you realize that everything is quite logical and practical.

There are two ways to connect the Internet via Wi-Fi, let's start with first, when you want to select a network manually:

• go to Settings, go to point WiFi;
• activate it by moving the switch until it turns green;
• now all available networks appear and you select the one you need.

If there is a padlock, it means that the network is locked with a password. In its absence, you can connect and start surfing the Internet.

Second way much simpler, but it is more suitable for the case when you previously connected to any network. Just calling Command centre and activate the Wi-Fi icon.

To make this panel appear, just swipe up from the bottom. With this point finished and now you can move on to the mobile Internet.

In almost any country, if you use a mobile operator, then the Internet of different standards is almost always attached. It depends on the coverage and most often it is 3G or 4G.


On the iPhone, this setting changed constantly, but not critically. I will tell you how to connect or disconnect on the latest firmware and I think it will also be possible to navigate on older models.

The whole process will look something like this:

1. go to Settings, press cellular;
2. activate Cellular Data.

If you want to change the standard, then in the same menu, simply select Data Options and you will find everything there. You can switch from 3G to 4G and vice versa.

Almost every year, the world famous Apple company pleases his fans new model smartphone. iPhones are famous high quality and a set of many useful functions, among which an important place belongs to Internet access. But connecting to the network on an “apple” device causes difficulties for some users, because on an iPhone 4, on an iPhone 5, 6, 6S and other versions of Apple phones, the installed Internet can be configured differently.

Today, setting up to work on the Internet on the iPhone 4, iPhone 4S, iPhone 5S, iPhone 6 and other gadgets has become much easier than a few years ago. If earlier, in order to connect to the Internet, it was necessary to know the settings of the network operator, send him messages asking him to connect, or contact the communication salon for this service, now everything has become much easier. The setting is carried out by the user independently and directly through the device menu.

How to set up the Internet on the iPhone 5S, iPhone 6 and other versions of Apple phones, and how to connect the device to the Internet, is described in detail in our today's article.

If, after purchasing a new gadget, you are thinking about how to set up the Internet in iPhone 4S, iPhone 5.6 and other versions of this popular product from Apple, first of all think about automatic mode. Recall that almost all settings on smartphones from this company are made automatically. Namely, the user buys a SIM card of a certain telecom operator, inserts it into a special compartment on the device, and after a couple of minutes all the necessary settings are automatically registered in the system. Moreover, “everyone” means absolutely everything - from the network access point to the account name.

But this method has its drawbacks. Firstly, not every communication company provides a service today. auto tuning the Internet. Companies such as Megafon, MTS and other well-known operators on the market, of course, have it, but less popular companies may not have it. In the latter case, the user must refer to the company's website - perhaps the necessary data for configuration is presented there, or directly to the operator's office.

How to connect and configure the Internet in manual mode

In the event that on your iPhone 5, 6, or other device from Apple it doesn’t work out to connect to the telecom operator and set up the Internet, and this can happen due to a malfunction of the device itself or problems with the network, you can try to fix the problem manually.

To do this, you must use one of the 3 methods described in detail below.

Method 1. Set up using an iPhone

To use this method, insert a SIM card into the device, and then follow the instructions below:

• Go to the device settings menu.
• Choose a section cellular communication.
• Look for cellular data.
• Move the slider to active mode to connect your iPhone 5.6 or other device you are working with to the Internet.

After completing the last step, check if the network is working. To do this, you just need to open a browser and try to find any information in a search engine or go to your favorite Internet resource.

Advice. When connecting to the Internet on the iPhone, choose unlimited tariffs, which are presented today by almost all communication companies. Mobile traffic not cheap, so with constant use of the Internet, the usual tariff will be very expensive. If you are an active user, choose only unlimited tariff plans for the Internet.

Usually, the connection by the first method goes smoothly and without problems. But sometimes it happens that after completing all the steps, the network is still unavailable. In such a situation, you need to check things like:

• The performance of the SIM card, the presence of antenna division.
• Number balance (perhaps, the subscriber simply ran out of funds on the account if the tariff is not unlimited).
• Cellular data and its settings (you can find it in SMS, because they are sent when you first connect to the network). If the user cannot find this data, you need to contact the operator by requesting it by SMS.
• Set up cellular data yourself: go to the cellular settings on the device, then go to the cellular data network section, enter the information sent by the communication company via SMS.

Method 2: Connecting with a router via Wi-Fi

To set up the Internet on an iPhone using the second method, you need to follow a series of steps:

• Go to device settings and select Wi-Fi.
• Move slider.
• Wait a few seconds for the device to detect available network access points.
• Select your network, click on its name.
• Enter the password, press the connect button.

After that, the Internet on the smartphone should work, and if this did not happen, you need to check the network's performance through a PC or laptop. It may turn out that the problems are present in the network itself or the router is not configured correctly.

Method 3: Connect using a computer

To use this method, you will need a PC or laptop with a Wi-Fi module or an appropriate adapter. Before starting work, you need to check that the module is working properly. And then follow these steps:

• Go to the PC in the control panel and select the center.
• Go to the wireless network management section.
• Click on the add button.
• Select the type of connection between a computer and another computer.
• Enter the desired name, come up with a password.
• Confirm the operation, in no case pressing the inclusion of sharing.
• Go to the network connections section and select the network with the previously created name.
• Check the boxes next to the section and title.
• When connecting to the Internet via Wi-Fi, the first time we select Home.
• Now all that remains is to turn on the smartphone and connect to the network. The internet should work great.

Ways to turn off the Internet on iPhone

The methods for disconnecting depend on which Internet connection method you selected earlier. If the first one is described above, then you need to go to the cellular data settings and drag the slider to the inactivity mode.

If the second or third methods were applied, just turn off the wi-fi. If your device has operating system version 7 or higher, you need to touch the bottom of the screen with your finger and swipe all the way up. After that, a menu will pop up where you should click on the file icon so that it does not light up.

It should be remembered that if you do not need the Internet on an iPhone, it is better to turn it off, because. When the connection is active, the battery charge is consumed much faster.

Once again, we note that the versions of gadgets from Apple are different and, accordingly, the Internet settings in each of them may vary. Usually a lot depends on the version of the operating system installed on the device.

If the user failed to set up the network manually, the most correct decision would be to contact the operator's support service by phone or on the corporate website and ask to send the necessary settings by SMS. IN personal account You can also request these settings by specifying your smartphone model. The parameters for each of the versions of the iPhone are present there.

Experience shows that in the vast majority of cases, all network settings on iPhones are carried out automatically when a SIM card is installed. If after that you still cannot catch the network and connect to it, you need to check the status of the account, namely the balance Money on it, your own tariff, tariff restrictions, etc. Sometimes a simple misunderstanding can be the source of the problem.

Often there is such a problem as the inaccessibility of the network itself. Remember that signal strength is usually good in urban areas. In the suburbs, it may be of poor quality - intermittent or completely absent.

So, the main ways to set up a network and connect to the Internet on an iPhone were discussed above. Which connection method to choose is up to the user, based on specific situation. But it should be noted that you need to resort to manual settings only if there is serious problems with automatic.

The Internet has become an integral part of life modern man. It's hard to imagine a smartphone owner who doesn't use mobile network, does not surf the Internet or does not communicate with the phone in social networks.

In order to have access to the World Wide Web, you will have to configure the device. Usually this procedure does not take much time. Next, you have to figure out how to set up the Internet on the iPhone 5S.

What should every user know about this process? What options for setting up the Internet on "apple" devices will help access the World Wide Web? All this will be discussed later! In fact, even a novice user is able to bring an idea to life in a few minutes!

Working networks

To begin with, one needs to understand important fact- owners of mobile devices can work with different type the Internet. Depending on it, the algorithm of actions when setting up access to the network will change. Despite this, all the proposed connection options are quite easy to learn.

I wonder how to set up the Internet on the "iPhone 5S"? Then you have to decide which particular network to use. Today, the iPhone can work with the following types of Internet access:

• WiFi:

More and more users are trying to use Wi-Fi and 4G network. In fact, the difference between setting these connections is not critical. What should every owner of an "apple" phone know before starting to work with the Internet and setting it up?

Mobile Internet

Let's start with the most common option - connections. How to set up the Internet on the "iPhone 5S"? "Tele2" or any other mobile operator - it doesn't matter what company we are talking about. The main thing is that the smartphone owner will have to configure the device for normal operation with mobile internet.

What will be required for this? Need to:

1. Insert SIM card into iPhone. After that, it is advisable to choose the most favorable tariff plan for working with the Internet and connect it.
2. Go to "Settings" on your phone.
3. Open the "Cellular" menu.
4. Set the switch opposite the inscription "Cellular Data" to the "Enabled" mode. At the same time, the green indicator next to it will light up.
5. Click on "Cellular Data Network".
6. How to set up internet on iPhone 5S? "Beeline", "Megafon", "MTS" or "Tele2" - it doesn't matter. In the window that opens, you will have to enter data for accessing the Internet. It's about about username, login password and APN.
7. Click on the "Save" button.
8. Move the pointer opposite "Enable LTE" to active mode.

Nothing else is needed. From now on, it’s clear how to set up the Internet on the iPhone 5S. Problems can only arise with the search for network access data.

For "MTS"

But it is quite a solvable task. In general, it is recommended that you check with your mobile operator. This is the only way to be 100% connected to the mobile network.

You can use the generally accepted rules for each telecom operator. How to set up internet on iPhone 5S? MTS offers the following login details:

1. APN is a special combination that indicates which network you are connecting to. In our case, it is necessary to write internet.mts.ru in this field.
2. Username - company name on Latin. To be more precise, mts is written in this line.
3. Password - it is similar to the username.

Accordingly, after entering the proposed data and saving them, you can access the Internet from the MTS SIM card. What other options are possible?

For "Beeline"

How to set up internet on iPhone 5S? Beeline proposes to act in exactly the same way as MTS. The only difference is that the data used will be fundamentally different.

If the owner of an "apple" phone has a Beeline SIM card inserted, he needs to enter the following data to connect to the World Wide Web:

1. APN - almost completely reproduces the previously proposed inscription. But in this case, it will look like internet.beeline.ru.
2. The password is the name of the operator. It must be written in Latin. To be more precise, the password for connecting is beeline. Everything is written in small letters.
3. Username - you need to copy the password.

It can be seen that in general the algorithm of actions remains the same. Setting up mobile Internet with Beeline is as simple as with MTS.

For Megafon subscribers

But what if the user decides to insert into mobile device SIM card "Megafon"? There is no reason to panic. Using the example of the first two operators, it was possible to make sure that setting up a mobile network is an extremely simple task that does not depend on the service company. What to do in this case?

How to set up internet on iPhone 5S? Megafon provides the following data for setting up a mobile network:

1. The name is gdata.
2. Password - repeat the network name.
3. APN - in this case, the information looks primitive. It is enough to write simply internet in the corresponding line.

Important: for successful network setup when working with Megafon, you can leave the "Password" and "Name" fields empty. This variant of the development of events is perceived without errors and failures.

Working with 4G

Now we can talk a little about how to properly work with the 4G network. This connection raises many questions among users. Therefore, it is necessary to deal with such a network and its configuration.

The first thing the owner of "apple" products should remember is that before connecting to 4G, you need to buy a SIM card that supports this type of data transfer. This feature is recommended to specify when buying a SIM card.

The second nuance is the operating system. Before you think about how to set up the Internet on the iPhone 5S by connecting to 4G, you must have new version operating system (iOS 7.0.4 and later).

Ready? Then the following algorithms are offered to the user's attention:

1. Connect to the mobile Internet using the previously proposed methods.
2. Open "Settings" - "Software Update".
3. Click on "Update".
4. Agree with the update and wait.
5. Enable the LTE option in the "Networks" settings.

If everything was done correctly, then LTE will appear in the upper left corner of the screen. This means that a 4G connection has occurred.

You can resort to another option. It will be of interest to those who have a computer at hand. The user needs:

1. Connect iPhone to PC with a wire.
2. Launch iTunes. In the "General" menu, select "Update Software...". Agree with the process.
3. Disconnect iPhone 5S from computer. Go to "Settings" - "Networks". Enable the LTE option.

From now on, it is clear how to set up mobile Internet on the iPhone 5S. There is one more very interesting trick left.

Working with Wi-Fi

It's about connecting wirelessly. Wi-Fi on a smartphone as a network access is in great demand. You can connect to the Internet using this option almost anywhere.

How to set up the Internet on the Chinese "iPhone 5S" using Wi-Fi? Required:

1. Turn on iPhone. Go to the "Settings" section.
2. Select Wi-Fi.
3. Move the switch indicating work with Wi-Fi to the "Enabled" state.
4. Wait. A list will appear available connections. Select the desired line.
5. If necessary, enter your login information. More precisely, you will need a password from the wireless network.

You can close settings. If everything was done correctly, the user will be able to access the Internet without much difficulty. It is proposed to check the connection using the browser. Or you can look at the upper left corner - there will be an indicator with the Wi-Fi signal strength.

Results

From now on, it’s clear how to set up the Internet on the iPhone 5S. There is nothing supernatural in this procedure. As already mentioned, even a novice owner of an "apple" smartphone will be able to use all of the above methods of working with the network.

Usually help service centers to set up and enable the Internet on the iPhone is not required. People can handle everything on their own. If you want to work with a mobile network, then it is recommended to contact your mobile operator directly for help. He will be able not only to tell about the Internet connection, but also provide the necessary network settings. In fact, everything is very simple. A few minutes - and the Internet is ready to go.

Articles and Lifehacks

Usually, new owners of Apple devices do not know how to do this at all. Our article will tell how to set up internet on iphone 4s. Note that this does not require the user to have any special knowledge or skills, even an idea about it - except in cases of software problems.

Internet setup in iPhone 4S

Let's start with the fact that the setting largely depends on our mobile operator, which can activate the appropriate settings automatically. To do this, open the Safari browser and prescribe any address, thus checking the network. If our device still does not connect to the Internet, then we are recommended to perform the following steps.

Most often, the mobile operator itself sends us the settings on the iPhone; sometimes we can call the support service ourselves with such a request. However, there are often cases when we need to register such settings ourselves, manually.

We go into the main settings of the device and go to the "Network" item. If we want to use the mobile Internet, select the "Cellular data network" item and turn it on. It is recommended to check in advance correct settings from your carrier. They are filled in with Latin and lowercase letters. Occasionally, such data is consistent with the tariff used.

If we prescribe the settings of our cellular operator manually, we are prompted to enter the APN (that is, access point), username and password. These settings are specific to each service provider. For example, companies such as Beeline and MTS have the same username and password (beeline and mts, respectively), while these fields remain empty for the Megafon operator. If we use Beeline, then we write internet.beeline.ru in the access point line, if MTS - internet.mts.ru. Megafon subscribers just need to enter the word internet.

Note that if we are roaming, it is recommended to take care of disabling cellular data and 3G in advance.
So, we figured out how to set up the Internet on an iPhone 4s. After setting up, it is recommended to restart our device.
However, you should know that it is much more profitable to use not mobile Internet, but Wi-Fi.

How to setup WiFi Internet on iPhone 4S?

Since our mobile device is equipped with an appropriate module, we definitely need to know about the principles of this protocol. It is easy to organize a wireless Wi-Fi access point both at home (taking care of buying a router) and in in public places– for example, by connecting to available networks in a cafe or bar.

Connecting to a wireless network is very simple, if only. It is enough to select one of the available networks, however, you will first need to activate the “Wi-Fi” item through the settings. The disadvantage of the "apple" gadget is that our iPhone is actually tied to the same access point - unlike, for example, devices under Android control. If we move away from it, the connection is lost.