Make a ceiling lamp with your own hands. DIY chandelier - manufacturing instructions and a master class on creating designer models

Today, a chandelier is more than just a source of light. It is one of the main elements of the room decor. Handcrafted lamps are the most popular as they represent the personality of home owners and their extraordinary creativity.

Undoubtedly, hand-made creativity is a rather difficult task that requires a lot of patience and accuracy. However, doing something with your own hands is always quite exciting and informative. The topic of this review is how to make a chandelier with your own hands.

The choice of material for a homemade chandelier

In order to make a handmade lamp, a variety of materials are used:

• glass;
• tree;
• plastic.

In addition, sometimes, in order to make a chandelier at home, very unusual things are used:

• paper;
• cardboard;
• disks;
• straw;
• branches;
• wine bottles and stuff.

When choosing this or that material, you must take into account your own preferences and style used in the design of the room.

In addition to material, devices may differ in manufacturing techniques. The most common are:

• Japanese origami;
• macrame;
• weaving;
• thread;
• knitting;
• application;
• embossing.

DIY chandelier ideas - step by step instructions

Nowadays, there are many unusual ideas on how to create a beautiful lamp for an apartment with your own hands. Let's consider those that are more popular.

Chandelier made of plastic spoons

Conventional disposable plastic spoons are the easiest and most affordable type of material to craft a chandelier. The advantages of such raw materials are:

• low cost;
• variety of colors;
• durability.

To make a lamp, you will need:

• a plastic bottle with a volume of 5 liters;
• disposable spoons;
• PVA glue;
• bulb holder;

Procedure:

1. Prepare the bottle. To do this, remove the label, cut off the bottom, wash the workpiece thoroughly and dry it.
2. Prepare the spoons by cutting off the handles.
3. Place the scoops over the entire bottle with the convex part facing outward.
4. Fix the cartridge in the made cover.
5. Attach the chandelier to the ceiling and plug it in.

Chandelier made of plastic bottles

An interesting solution from a decorative point of view will be a lamp assembled from plastic bottles.

1. We take scissors and cut out various patterned shapes and unusual figures. We will assemble a chandelier from them.
2. We attach several thin rods to the frame of the old lamp and connect them, removing the central one. At this stage, the lighting fixture takes on the shape of a hedgehog.
3. We fix all the prepared shapes and forms on the chandelier frame. The product is ready!

Let's consider a particular example - the process of creating a lamp in the form of leaves:

1. Cut out small blanks from bottles that imitate leaves. Usually birch leaves are chosen.
2. Using a soldering iron, slightly fuse the cuts at the leaves, and draw the veins - this will make them look more spectacular.
3. Punch holes in the leg of each leaf using a heated thin needle.
4. Use wire to form the branches. Screw them to the frame of the future chandelier.
5. Attach leaves to the branches. The original design ceiling lamp is ready!

Chandelier with paper butterflies

The lamp with paper butterflies is also popular. This model looks very impressive and luxurious, although it is quite simple to manufacture.

Sequencing:

1. The role of the base is played by a frame from an old lamp or a simple rim made of metal or wood.
2. Take paper and cut out butterflies from it according to pre-prepared templates.
3. Attach the cut insects to a fishing line or nylon thread.
4. Attach the resulting threads to the frame of the future chandelier and decorate it.

Fabric chandelier

This type of lighting fixture is also based on a solid frame or thick wire. First of all, prepare the base, and only then you can start cutting out the material to create the lampshade.

The length of the finished product depends on your wishes, and the width must correspond to the size of the frame. After completing the cutting work, be sure to try it on. The next step is to sew the fabric to the base of the chandelier.

In order for the lampshade to retain its shape, you need to competently approach the choice of material. If you are using light fabric, then the lower part of the lampshade should be heavier.

Fringe, braid or lace can be used as decoration. But try not to overdo the decor.

Plafond made of threads and a balloon

To create such an original shade, you need to prepare:

• thick threads or rope about 1 m long;
• old cartridge;
• petrolatum;
• glue and brushes;
• balloons - 1 - 2 pcs.

Manufacturing process:

1. Inflate the ball to the required volume, and use a felt-tip pen to mark the boundaries of the winding of the thread.
2. Coat the entire surface of the ball with Vaseline using a paintbrush.
3. Pour the glue into a wide container and start to process the threads with it as you wind it around the ball.
4. After you fill the ball with threads to the marked boundaries, it should be left to dry.
5. After a day, burst the balloon and remove it.
6. Cut a hole for the chuck at the top and insert it. You also need to cut a hole from the bottom of the plafond - this will make it more convenient to insert the light bulb. The product is ready!

Wine bottle chandelier

Such a chandelier is more laborious to create than the options described above. It is rather difficult to make it. Patience and attention are needed here. But the effort is worth it!

Necessary materials:

• wine bottle;
• cartridge;
• cable;
• sandpaper;
• base made of metal or wood.

From the tools you will need a glass cutter.

Manufacturing procedure:

1. Preparatory stage. Wash and dry the bottle, get rid of the labels, mark a line with a marker along which you can cut the bottom using a glass cutter.
2. Sand the cut.
3. Slide the wire through the bottleneck and attach the socket.
4. Secure the bottle to a pre-prepared frame.

The number of shades for the chandelier depends on you - you can leave one or make five or six.

Laser disc chandeliers

If a large number of old CDs have accumulated in the apartment, do not rush to throw them away. They will make a pretty creative lamp.

To make an unusual accessory from laser discs, you will need to prepare a pair of round plates. They should be slightly larger than the discs. Still needed:

• fluorescent light bulb;
• steel or wooden racks;
• old magnetic starter;
• many CDs.

Take a thicker board and punch a hole in it for the starter. Attach everything to the lamp. Then start stringing CDs onto it while mounting the stands. Attach a second plank at the end. The work has been completed.

Chandeliers made of wood

Wood is the most common material for all kinds of crafts. The chandelier is no exception.

To make such a lamp, you need:

• wooden planks 0.4 m wide;
• glass jars with a volume of 1 liter for shades;
• sandpaper;
• self-tapping screws.

The order of manipulations:

1. Sand the strips with sandpaper.
2. Make recesses in them on the back for mounting the wire and three holes for the shades.
3. Varnish the planks.
4. Attach the sockets, screw in the bulbs.
5. Plafonds will serve as ordinary liter cans, painted white.

Choosing a lamp for a homemade chandelier

To make a chandelier made of scrap materials made by you look even more attractive, you need to choose the right bulbs for it. The following guidelines will help you:

1. Choose a lamp with a suitable wattage. Remember that overly strong products can cause a fire.
2. Look at the number of lumens. The larger it is, the more natural the lighting is.
3. Make sure to match the shape of the light bulb to your appliance. For some models of chandeliers, light bulbs of a strictly defined shape are required. Only then will they work efficiently and correctly reflect light rays.
4. Be sure to look at the expiration date. If you plan on using your luminaire frequently, then look at the luminaires with the longest lifespan.
5. Ask what kind of light the lamp will glow - cold or warm. For the home, it is better to purchase an option with a warm shade of light. This will make the environment seem more comfortable.
6. Do not ignore the energy consumption of the light bulb. Products with low energy consumption are considered the best choice.
7. Check for mercury in the lamp - this will determine how you dispose of it. Mercury-containing products cannot be simply thrown into the trash can. They must be handed over to special collection points.

Product decoration

You can use a variety of things to decorate homemade chandeliers and lamps:

• paints and varnishes;
• lace;
• satin ribbons;
• fringe and braid;
• beads, beads, rhinestones, stones.

Artificial or dried flowers, feathers carved from butterfly fabric are a good decor. In general, how to decorate the finished product depends only on you. You can use any available means that your imagination indicates.

In conclusion, we note that such a homemade lighting fixture, like a chandelier, will definitely bring notes of freshness and stylishness to the atmosphere of the room. Your loved ones and guests will definitely note the originality of the accessory and your skill. In addition, a hand-made lamp is an excellent gift for a friend or colleague.

Original photo ideas of homemade chandeliers

Learn how to make a light fixture out of wire, construction mesh, so that flowers can grow inside it. How to turn a snag into a lamp, and the branches of a tree into a floor lamp?

How to make an original lamp?

A very interesting design thing is obtained from the simplest materials, most of which remain from a picnic. If you went out with friends and family to nature, you must definitely remove the trash after you. This not always desirable job is made more enjoyable if you ask to fold the plastic spoons separately. If children come with you, arrange a competition, who will throw more and faster spoons into a separate garbage bag or bag.

You will also need water canisters. After a fun picnic, arriving home, after a while, you can make original lamps from the containers left over after the feast. Give them to your friends, keep them for yourself to hang in the hallway, in the kitchen or in the country.

So, here's how to create such a chandelier with your own hands or with the help of home. First, lay side by side:

• 5 liter oval plastic bottle;
• disposable plastic spoons;
• cable with socket and plug;
• low power LED light bulb;
• pliers;
• glue gun;
• screwdriver;
• stationery knife.

So that such original lamps do not lead to a fire, take an LED, and not an ordinary Ilyich light bulb.

For information: 4-5 W LED bulbs correspond to 40 W, and 8-10 W - 60 W conventional electric.

Carefully so as not to cut yourself, remove the bottom of the canister with a knife.

Also, observing safety precautions so as not to injure yourself, cut off the handles of each plastic spoon completely. Using a little hot glue from a gun on the cuts of the "shoulder blades", glue them to the bottom tier of the bottle. Usually 17 pieces go here. Then, with an overlap, attach the second and subsequent rows, staggering the elements.

To cover the neck, glue 10-12 scoops together to form a ring.

Pass the bulb holder with the light bulb and cable through the cut bottom hole in the bottle. If this "electrical" part is difficult for women, call your husband. If you don't have one, buy a cable from a hardware store with the socket and plug already screwed onto it. You can borrow this working part of the lamp from the old one.

Put on the top of the canister a "ring" of spoons, screw the lid on. To do this, let the husband drill a hole in it with a drill, and you yourself can do this manipulation with a hot nail or self-tapping screw, holding it with pliers. The original lamp is ready.

3 models of designer lampshades with your own hands

Ideas are in the air. If you are in the country and there is no such piece of furniture there, it is easy to make it yourself from what is at hand. Take:

• hollow dishes;
• wire;
• polyurethane foam;
• gloves;
• paint;
• brush;
• pliers.

As a basis, you can use unexpected things: an old saucepan, a flower pot, an already unnecessary baby pot.

Turn over any of these auxiliary items, lay them upside down on a flat surface. Wrap the wire, its turns repeat the shape of the future product, should be the same as the lampshade will be. With your own hands, but with gloves, take a spray can in your hands, squeeze out a little foam from it onto the frame, closing the wire, let it dry.

After that, make the contours more even with a knife, cutting off the excess. Paint in your favorite color, white looks airy and elegant. Such a lampshade, made with your own hands, will decorate a summer cottage. You can make several and hang them here. By avoiding large expenses, this way you decorate the space.

This lampshade looks stylish and modern, while the next one has a classic look. For it use:

• thick wire;
• pliers;
• a small plastic water bottle.

Let's start making a lampshade with our own hands by making the upper center piece. To do this, wind 1 turn of wire on the bottle, remove it, cut off the excess, twist the ends to make a ring. Its diameter should be such that the cartridge can be threaded from below, and it kept on the ring, would not come out through the top.

Now roll the large outer ring out of the wire. We will fix it. To do this, cut 4 identical pieces of wire with pliers, fix the first end of each on the small one, and the second end on the large ring. The upper part of the lamp is ready.

The dimensions of the lampshade depend on whether it is being made for hanging from the ceiling or for a table lamp. The first is larger than the second.

Roll the bottom ring out of the wire, it is the largest. Connect it to the second top five pieces of wire, distributing them evenly. It remains to decorate the frame of the lampshade. To do this, pass the wire through the second ring, curling it up and twisting it through the base. Also design the second ring.

It remains to sheathe it with fabric. Attach the flap from the second top ring to the bottom ring, cut to size, adding to the seam. Hem away the large sides of the resulting rectangle. Stitch the fabric from the side directly on the frame, decorating this place with braid. That's it, you made a wonderful lampshade with your own hands.

If you want to get acquainted with the most modern ideas on this topic - please! In skilled hands, the construction mesh will turn into a stylish lampshade.

With your own hands or, having summoned a man, cut a rectangle from her with metal scissors. To fix the holder, twist a circle from the wire, fix it on top of the lamp with four pieces of wire.

If you do not have a coarse mesh, use pliers to trim off the extra sections to increase the distance between the strips of wire. Paint the lampshade and the frame is ready.

And now the magic begins. You can make an original lamp that will benefit not only people, but also plants. Attach a planter with a flower at the bottom of the lampshade. You can tie, woven using the macrame technique, to the lower turns of the wire with a thick rope. Check that the mount is secure.

If there is a man and a welding machine in the house, encourage this tandem to make a metal ring with "rays" that need to be welded to the bottom of the luminaire.

If you have an indoor climbing plant, such as ivy, run its lashes between the mesh of the trellis. The original lamp will become a flower house. It is better not to use ordinary light bulbs, as they are very hot and can burn plant leaves. Plus, the air around the flowers will be too hot. Screw in an LED or fluorescent light bulb.

For such an original lamp, you needed:

• construction mesh or strong wire;
• brush and paint (optional);
• pliers;
• light bulb with a cartridge;
• flower.

You can well fix the cups with seedlings on such a lampshade, thereby finding additional space for growing it and conditions for lighting in the evening.

We make a floor lamp, a table lamp with our own hands

While walking in the woods, do not pass by the ornate driftwood lying around. Put it in a bag, take it with you. Wash at home, if there is bark, peel off with a knife. Rub over the surface with a fine sandpaper, if necessary. Cover with wood varnish.

In order for the table lamp to hold well, the snag must be screwed to a sturdy pedestal with self-tapping screws. It must be heavy enough. An oak is suitable for him. If you find a broken branch of this tree in the same forest, saw off a 5–7 cm thick circle from the thick part.

It will also need to be sanded and varnished. When these wooden blanks are dry, connect them with self-tapping screws of sufficient length, passing them first through an oak stand, and then, driving them into a snag. Bolts and nuts can also be used.

You already know how to make a lampshade with your own hands. Therefore, make it and attach it to the driftwood, tying it with wire.

If the old floor lamp stand is no longer happy or you just want to decorate it, use wood for this as well. See how good birch racks look. Attach a branch of this tree to a lamp and see what kind of floor lamp you could make with your own hands.

How to crochet a lampshade?

If you are fed up with an old floor lamp, you can transform it with your own hands, giving it a "zest". Take the lace tape and sew it onto the top and bottom of the fabric lampshade. You can decorate with glitters by gluing them in the form of a pattern, evenly or randomly.

A floor lamp or chandelier will turn out to be unique if you knit a lampshade for them yourself. This can be done with a crochet hook or fine knitting needles. For the first option, you will need:

• hook;
• cotton thread;
• pattern for knitting napkins;
• water;
• starch;
• ribbons.

You can use, for example, such a pattern for a napkin.

Measure the upper circumference of the lampshade, we need its diameter. Tie a chain from air loops. Next, knit in a circle based on the napkin pattern. Measure the height of the lampshade and the diameter of its bottom circle. Based on this data, draw a trapezoid or rectangle (depending on the shape of the lampshade). Crochet this shape. Sew on the side.

Using single crochet stitches, tie the upper circle of the lamp and this trapezoidal or rectangular part.

Boil a glass of water, stirring occasionally, pour 200 ml of cold water in which 1.5 tbsp is diluted. l starch. Boil for 1 minute, remove from heat, cool. Lower the knitted lampshade here, soak well, then wring out, let the water drain, and the canvas dries, but remains slightly damp.

Put it on the shade. To keep the knitted lampshade well, you can skip a few ribbons or ribbons between the loops, tie them.

Shades look very nice if they are decorated with crocheted flowers.

A solution of starch or PVA will help to shape the knitted lampshade. Put it on the frame, apply glue, let dry.

In the second case (when using knitting needles), you need to make calculations for knitting, draw a pattern by the standards of the lamp, knit a trapezoidal or rectangular lampshade. Such models are suitable for floor lamps, chandeliers of a strict form. If you need to crochet a semicircular lampshade, first make the wedges, and then connect them with single crochets.

Here is another openwork chandelier. It is pleasant to make muslin with your own hands and decorate the bottom of the product in a circle. But first you need to create the lampshade itself. The crochet pattern for this beautiful thing is presented right there.

A table lamp will look amazing on the bedside table if there is such a lampshade on it, the knitting pattern of which is also given.

If your son or daughter does not let you finish the work, demanding attention, invite the children to make a lampshade too, let them twist the strips of paper into tubes with their own hands. Better to wrap them on a thin pencil, or on a wooden sushi stick, and then glue the free edge so that it does not unfold.

Now you need to glue the resulting blanks, using an object of a suitable shape as a frame, for example, a 5-liter canister. Having made the first inner layer, have the child move on to the second. There should be several of them to close the gaps. When the PVA is dry, cover a table lamp with this lampshade or hang it from the ceiling. Looks original and extravagant.

If you are interested in other ideas on this topic, watch the video:

A very interesting version of a lamp made of discs:

Ceiling chandeliers are lighting fixtures that perform two functions at the same time. Firstly, they are used to organize the main lighting in the room. Secondly, devices are one of the main elements of decorative room decoration.

Numerous manufacturers offer equipment of different designs, but it is far from always possible to find something really worthwhile that fits into the overall interior of the room. In other situations, the cost of the chandelier you like may be too high. That is why many people are interested in how to make a ceiling lamp with their own hands.

Hand-made products will be unique and original, thanks to them you can express your taste and character. It is not so easy to make such devices on your own. Work requires a certain amount of imagination and perseverance. On the other hand, a ceiling chandelier can be created from improvised tools and items that have become trash for you.

Choose any materials for making - wood, plastic, metal or glass. Chandeliers made of wine bottles, wooden skewers or straw look very original. To summarize: the choice of material for a homemade lamp completely depends on the imagination and idea that arose in the head of the owner of the apartment.

Varieties of lighting fixtures

The final stage in the implementation of any repair and construction work will be the purchase of lighting fixtures. Often, the main one is the ceiling chandelier, installed in the center of the room, subject to its correct geometry. There is a wide range of luminaires on the market that differ in design, shape, principle of operation and even the presence / absence of certain structural elements.

Today, all people strive to save money, so it will be important to use a chandelier under energy-saving or LED lamps. It is advisable to choose products with partially or completely closed shades in which lamps are hidden. Due to this, you will protect the ceiling structure and will be able to protect yourself in the event of a light bulb explosion (the fragments will remain inside the plafond).

If you still liked the chandelier with an open arrangement of bulbs, then inspect it and make sure that after installation the luminous flux will be directed downward. There is also a simple rule - the simpler the product, the easier the subsequent installation.

Another point to consider when choosing a chandelier is the purpose of the room and its dimensions. In spacious halls with high ceilings, volumetric pendant lamps should be installed. Space saving is required for small spaces, so focus on flat (flattened) options.

Conventionally, ceiling chandeliers can be divided into two main types:

• classic hanging;
• flat, placed as close as possible to the ceiling.

And the latter are divided into two subcategories - built-in and overhead. Overhead shades are considered the best solution for bathrooms, corridors and kitchens. The presence of a separating platform ensures their rapid cooling and high fire and electrical safety.

Recessed luminaires are also called spotlights. They are often installed (more correctly - built in) into furniture, suspended ceilings or arched structures. Manufacturers provide a wide variety of shapes, colors and designs for both traditional and flat luminaires.

Finally, in addition to the design features of the luminaires themselves, the type of light sources used is distinguished:

1. A filament lamp is one of the common and simple options. The cheapest light source. Under mechanical stress, it quickly breaks down due to the vulnerability of the structure, burns out relatively soon (in the case of continuous operation, it can burn out in two or three days).
2. An energy-saving fluorescent lamp is one of the best types of housekeepers. The advantages of the product are associated with efficiency and long service life. Along with LEDs, it is the most common light source in developed countries.
3. The LED lamp is an expensive product, the popularity of which is growing every year. The efficiency exceeds 90%, and in the case of high-quality devices it reaches 98%. They are characterized by a longer service life and increased reliability.

An example of a homemade lamp

Consider one of the simplest examples of a DIY ceiling lamp.

For manufacturing we need:

• plastic bottle with a volume of 5 liters;
• plastic spoons - their number depends on the size of the bottle, which will become the frame;
• quick-drying glue for plastic;
• sharp knife;
• cartridge with wire.

To begin with, a frame is prepared from a plastic bottle. Remove any labels from the item, rinse and dry thoroughly. After that, boldly cut out the bottom. Cut off all the handles from the plastic spoons, but so that small pieces of 2 cm remain.

Glue the resulting scraps with "scoops" to the base of the frame from a plastic bottle. To do this, we just need the remaining pieces of handles, which need to be poured abundantly with glue and pressed tightly to the surface (the convex part of the scoop should look outward). Glue the container in a circle until the entire surface is hidden. Ideally, spoons are staggered and then slid for a tight fit and no visible areas.

Cartridges with wiring can be taken out of some old chandelier, then installed and fixed in a new product by stretching through the neck of the bottle. A decorative bowl can be decorated with the same blanks using glue and placed on the neck.

To make sure that the product is working, at the final stage, screw a light bulb into the lamp and connect it to a power source. If successful, it remains to install the chandelier on the ceiling.

For a more stylish design and a change of color schemes, you can paint the plastic spoons. This will increase the originality and attractiveness of the product.

Style selection

In addition to the points listed in the first chapter of the article, when choosing a chandelier, you need to focus on a specific style. This is also true for those cases when you decide to make the product yourself. Comfort, coziness and how pleasant it will be to be in it depends on the interior created in the room.

The ceiling chandelier is the main element of the decor, therefore, with a competent approach, the perception of the environment will improve, with a careless one, it will completely deteriorate. As you know, “to break - not to build”, therefore, in order to spoil the interior, it is enough to choose the wrong style.

Decide in advance on the design of the future lamp. The most common styles for chandeliers are high-tech, modern and provence.

High tech

It includes products made of glass and metal. Modern appliances fit perfectly into the design of the bedroom and living room. Outwardly, a chandelier may look chaotic (with an arbitrary arrangement of decorative elements). An excellent option for people who want to modernize an apartment or a private house, but do not want to tinker with something too complicated. Any errors made in the manufacture of the chandelier may look like an original design solution.

Modern

In accordance with this style, appliances are created from glass and wood. The ceiling luminaire is characterized by perfectly straight and clear lines and has the correct geometry.

Provence

The most complex execution, which is suitable for people who are versed in the principles of hand-made. Various fabrics, colorful ribbons, beads, embroidery can be used to decorate the chandelier. The lamps turn out to be delicate, suitable for creating a romantic atmosphere. The Provence style lighting fixture is suitable for decorating any living space.

Installation materials

For ceiling mounting the luminaire, certain materials and tools will be required:

• the lamp itself;
• junction box;
• screwdriver (curly);
• switches;
• as an alternative - dimmers (rotary toggle switch that regulates the brightness, on / off the light bulb);
• wires;
• electrical insulating tape;
• indicator (tester);
• pliers;
• connecting blocks.

Ideally, electrical wiring should be routed using connector blocks. If there are no such products, then twist the bare ends of the wires with pliers and hide under a dense layer of electrical tape. Connections can also be placed under polymer caps. Make sure the wires are tightly wrapped around each other.

When laying the cable, pay attention to the material from which it is made. It is advisable to twist aluminum with aluminum or copper with copper. When wires of two different materials come into contact, gradual oxidation will occur, leading to burnout and loss of contact.

Sequence of work

Determine the phase of the wires before installing the ceiling light. To do this, you need an indicator screwdriver or a special probe. If you attach the working surface to the phase core, the light will start to glow. Otherwise, the wire refers to the zero phase.

Next, you need to determine the phases on the wiring of the lighting fixture. Plug in two wires, but never touch the third. If there are several bulbs on the chandelier, then about half of them will light up. Leave any wire in the outlet and insert the third instead of the second. The other half of the lamps should light up. Thus, the wire that is constantly in the outlet (and when connected alternately with the other two turns on the bulbs) is a zero phase.

Fix the luminaire to the ceiling. For this, both a classic hook protruding from the ceiling and a mounting rail (included in most modern devices) are used. If there is a hook from an old chandelier, it is advisable to dismantle it.

Connecting luminaires

If it is necessary to connect a floor lamp or chandelier with a two-core cable, difficulties should not arise at all. Simply connect the ends of this cable together with the two ends of the wiring harness. If the luminaire consists of several parts and more wires, then twist them correctly in pairs, subsequently connecting them to the desired residential electrical wiring in the apartment.

A three-core cable indicates the presence of two normal and one neutral phase. Follow the scheme described above to find the zero phase. After that, connect the device to the house wiring.

Traditionally, the neutral phase on the luminaire has wires with blue insulation, the usual one is brown, black or red. If there are several blue wires, then they need to be connected in pairs, and then connected to the zero phase. Proceed in the same way with the other colored parts.

Products with four veins are much less common. The latter is intended for grounding and is usually colored yellow-green. It should be screwed to the luminaire body using a regular screw. Be sure to insulate all connections.

For the manufacture of ceiling lamps with your own hands, any materials can be used. The main thing is to choose the style and shape in advance and navigate the place of installation. Also, before starting work, it is advisable to draw a sketch of the future product. Everything else is limited by your imagination.

The connection of homemade lighting fixtures is carried out in the same way as purchased ones. Using our instructions, you can easily connect ceiling chandeliers with two, three or even four conductors. The main thing is not to forget about safety rules and to ensure complete isolation of the wires, excluding a short circuit.

The originality of the interior design of a kitchen, bedroom or any other room can be determined by the presence of even a small accessory, the main thing is that it is rare or exclusive. This can be a do-it-yourself photo frame, a candlestick, a table for a phone, a floor vase, a lamp or a chandelier.

There are enough options for the execution of an unusual lamp for a living room or kitchen, you just have to turn on your imagination and it doesn't matter if your fantasy doesn't tell you anything. You can use the step-by-step instructions for making any model you like by studying the master class. Materials for making an unusual accessory can be found even without leaving your own home.

So, let's begin…

Homemade chandeliers or lighting fixtures can vary in materials or in how they are made. You can make a chandelier out of anything and for this it is not necessary to go to the nearest shopping mall, such materials can be found at home:

• paper;
• threads;
• disks;
• disposable tableware;
• plastic bottles;
• barbecue sticks;
• hangers;
• newspapers and glue;
• cardboard;
• felt hats and more.

The choice of material may completely depend on your imagination or the future model of the lamp - on the availability of certain materials.

You can make a lamp, chandelier or plafond in different ways:

• in origami or papier-mâché technique;
• using carving or embossing;
• using weaving or lowering;
• in crochet or macrame technique;
• by connecting identical fragments.

The manufacturing technique will directly depend on the selected material.

Chandelier made of barbecue sticks

Having wood sticks at hand (ordinary barbecue sticks are ideal), organza ribbons and glue, you can make an original plafond with your own hands, which will wonderfully decorate the interior of your kitchen if it is decorated in the appropriate style or has some of its details.

Making such a chandelier for the kitchen at home is not difficult:

1. Sticks are laid out along the perimeter of the square and connected with glue. The lesson is quite painstaking, but an excellent result awaits you. The height of the plafond will depend on your desire, the height of the ceiling in the room or the amount of material.
2. The upper part of the plafond must be glued with cut-off sticks (so that their ends do not protrude), laying them crosswise or parallel, leaving a hole of the required size for the cartridge in the middle.
3. After the glue dries, you can start decorating the product.
4. At the protruding ends of the sticks, multi-colored organza ribbons are tied; you should not skimp on their number. Several ribbons can be threaded between the sticks in the corners and in the middle of the product.
5. You can hang the plafond on a hook placed on the ceiling of your kitchen using the same tapes, and fix the cartridge in it through the hole left.

Chandelier made of cardboard

Simple cardboard can be used to make an unusual chandelier that will become an exquisite touch to your interior design.

A small master class will show you how to make it:

1. Using a printed stencil, two identical parts are cut out with slots for their connection in the center and connected into a single whole.
2. If the color of the cardboard is not what we would like, the parts are painted before assembling the chandelier.
3. In order for the chandelier to be assembled firmly, the points of its connection should be duplicated with wire or strong thread through the holes made in advance.
4. To the ceiling, the chandelier is attached to chains through which the power cord is threaded.
5. Chains and cord are painted to match the chandelier.
6. The junction of the cord with the cartridge is hidden under a plastic glass, also painted to match the chandelier.

By the same principle, you can make a chandelier made of plastic or hardboard with your own hands. It will be much stronger, but it will be quite difficult to cut parts with scissors; it is better to use a jigsaw.

You can decorate such a chandelier with any elements. For example, paint the flame of candles with glitter varnish, decorate the bowls of candlesticks with sequins or lace. Pendants, rhinestones or fabric flowers are also appropriate.

Luminaire made of laser discs

If there are a lot of laser discs left in the house, which are a pity to throw away, but they are no longer suitable as information carriers, you can make an original chandelier, shade or lamp out of them. The design of the accessory will depend only on your imagination, materials at hand and the number of accumulated discs.

What is required

To make an original lamp from discs, you will need two round wood planks of different thicknesses, which are slightly larger in diameter than discs, wooden or metal stands. You also need a fluorescent lamp of the required length, a magnetic starter and the actual disks. Planks made of wood can be ordered from a familiar carpenter or cut with your own hands, racks can be purchased nickel-plated.

How to make

We make a hole in a plate with a large thickness, install a starter with a switch and connect it to the lamp. Further, discs are strung on the lamp in the required quantity, stands are installed around the discs and the upper part is attached.

Thus, the old carriers in the form of an original lamp made of discs will serve the owners for a long time.

Chandelier "Birch Leaves" from plastic bottles

A chandelier made in the form of leaves will look quite unusual in any interior. How to make it yourself - the master class will show you. It is made from ordinary plastic bottles, the color of which you can choose at your discretion.

Instructions step by step:

1. Bottles are cut into pieces of any size chosen for future leaflets.
2. Each blank needs to be shaped like a leaf.
3. Using a soldering iron with a thick tip and a one-sided bevel, it is necessary to melt the sections of each workpiece so that the future leaves look more impressive.
4. Also, with the edge of the sting, it is necessary to give the workpiece the structure of a leaf. This should be done very carefully, as you can easily melt a hole in the plastic. A leaf with traced veins and melted cuts will look complete. Since the plastic bottle has a cylindrical shape and when heated, the plastic is deformed, as a result, the leaves are very effective.
5. A red-hot needle melts several holes for fastening at the base of each leaf.
6. Twigs are formed using a thin wire and screwed to a steel wire frame.

If you make a new leaf-shaped chandelier as a shade for a floor lamp or table lamp, it will be a harmonious addition to a chandelier that turns a room into a forest.

New life for an old chandelier

Surely, in many living rooms there are still chandeliers, which are a pity to throw away, since they are a memory of some person or event.

In order not to throw away the thing, the old chandelier can be given a new life:

• To begin with, it should be washed, degreased, plaster and painted.
• The decor for an old chandelier can be made in the form of decoupage, the cartridges can be renewed by making them in the form of candle influxes with the help of hot glue, not forgetting to then tint them.
• You can make original pendants at your discretion from the available beads, buttons and other elements.

How to decorate a chandelier with your own hands (video instruction)

In a new look, the old chandelier will hang in its place for a long time and please the eyes of its owners.

A hand-made chandelier will bring an original twist to the design of the kitchen, living room, nursery or any other room and will become a bright, unique accent of even the most unremarkable ordinary interior.

DIY chandeliers in the kitchen (photo)

Taking on the arrangement of the interior space, it is important to think over every little thing. After all, we all subconsciously strive for comfort and it is the smallest details that can create a special atmosphere, convey the general idea, mood and character of the room. Professional designers claim, and interiors clearly prove that the right choice of chandeliers can not only decorate the interior of a room, but also make life brighter and more fun. Beautiful shades for chandeliers with an original design give special grace and gloss to the lamps. You can familiarize yourself with how to make them yourself and what materials are better for this in this article. A detailed, step-by-step master class, as well as a visual photo, will be an excellent help for you in this exciting process.

Material selection

When making a chandelier, it is difficult to single out any one material that would meet all the requirements. Each of them has its own individual characteristics and characteristics. For example, paper, which is the simplest and most affordable material, lends itself well to transformation.

Luminaires made from shards of glass and strips of metal have a dazzling shine and beautiful appearance. Wood and fabric add warmth and comfort to the interior. Lacy lampshades are notable for their special beauty, captivating everyone at first sight.

In a word, you can make a chandelier with your own hands from anything, the main thing is to be smart in time and turn on imagination.

A paper napkin chandelier is a bold, but justified experiment

We will describe in detail in this article how in an ordinary object you can see its creative potential for creating an exclusive decorative element.

Step-by-step instructions, with a description of each action, will help you make incredibly beautiful and unique lamps from available tools, which will be a great addition to your favorite interior.

What you need to pay attention to before making a chandelier

Many are interested in how to properly make a chandelier in, and other rooms. After all, I want this element of the interior to be not only beautiful, but also functional.

On the one hand, a chandelier is a lighting device capable of providing the proper level of lighting in an apartment. Indeed, a lot depends on the choice of light in the room, including the safety of the eyes. On the other hand, I would like the ceiling structure to complement the interior design, creating a special atmosphere of warmth and comfort.

When making a chandelier, the first thing to consider is the height of the ceiling. For example, a chandelier with a bar mount is suitable for low ones. So, the ceiling will look visually higher. If the ceilings are high - 3 m and more, then it is better to make your choice in favor of a pendant lamp with a hook mount.

Lamp selection

For any room, you need to individually approach the intensity of its lighting.

A small bathroom will require 80-100 watts.
Kitchens need a minimum of 120-150 watts of lamp power.
The living room and the hall cannot do without light bulbs in the range of 150-300 W.

The number and power of lamps are calculated based on the established standards - 20 watts are required for 1 m². electricity. It is also necessary to take into account the parameters of the room, its dimensions and reflective properties.

Edison's designer lamps - look beautiful and unusual

Plafond decoration

The appearance, decor and design of the shade play an important role in the design of the chandelier. It is selected for the interior of the room, depending on the style. Crystal for classics, metal and glass for, wood will perfectly fit into country or chalet style, fabric and silk will perfectly suit Provence style.

To illuminate a room on several levels, you can additionally make wall sconces or floor lamps.

Step-by-step manufacturing workshop

You don't have to start from scratch to create a beautiful ceiling decoration. Take a look around, for sure you have a thing in your house that you have not used for a long time. And who knows, maybe it is she who will become the main subject in the manufacture of the original lamp. Moreover, there are now more than enough ideas and inspirations for creativity on the Internet.

Important! It is best to start searching for the things you need from the kitchen or balcony. It is there that we store all sorts of trash that was once so necessary for us and with which, as often happens, it is so difficult to part with it later.

Spectacular mug chandelier

As strange as it may sound, but it is from dishes and other kitchen utensils that the most unusual and interesting models of lamps are obtained. For example, tea mugs are the ideal material for making a spectacular light fixture.

For work we need:

• Mugs
• Saucer
• Drill
• Porcelain drill with special hole

We make it quickly and easily

1. At the bottom of the mug, make a small hole for the wire with a drill, attach the electric cartridge and bring the wire out. It is advisable to close the hole with a plaster mixture.
2. Next, the mug must be glued to the saucer, where there should also be a hole, insert a light bulb and hang the newly made lamp in the right place.

As you can see, the original and fashionable design can be obtained from completely ordinary objects.

Mesmerizing yarn chandelier

Since this is a fairly simple product, we need a minimum of things to make it, namely:

• Wire with a cross section of 4-5 mm.
• Nippers
• Thin thread
• Multicolored yarn

Manufacturing instruction:

1. A ring is made of wire, the diameter of which will correspond to the future size of our chandelier. To get a perfectly even circle, you can wind it around any object that has a cylindrical shape.
2. We bite off the excess wire with pliers, leaving 2-3 cm in stock on each side. We tie the ends with a thin thread.
3. It remains to dress up our chandelier beautifully and brightly. To do this, we cut the yarn in such a way that the length of each segment is twice the height of the shade.
4. Alternately, on a knot, we tie the resulting strings until we hang the whole ring with them. From the same yarn, we make a fastener for a hook.

You can use such a lampshade both as a chandelier and as a decorative element that decorates the interior of the room.

Combining the skills of macrame and papier-mâché, you can get a stylish chandelier for the bedroom

Important! For the manufacture of such a lamp, instead of woolen yarn, you can use any other thread. The main thing is that it fits harmoniously with your interior.

Unusual teapot lamp

You will learn how to make a chandelier from an ordinary teapot on your own from this master class. Here's what we need for this handmade masterpiece:

• Kettle
• The wire
• Electro cartridge
• Metal chain

Step-by-step manufacturing guide

1. First of all, the bottom of the kettle is cut out. This is done in such a way that the resulting cutting edge is not sharp, otherwise it will be possible to injure yourself.
2. Next, an electric cartridge is fixed to the lid of the kettle, the wire of which is led out through a small hole drilled at the top.
3. A chain is attached to the handle of the kettle, through the links of which a wire is threaded. The lamp is ready.

Let's breathe new life into bottles

Glass bottles, especially if they are beautifully shaped, can be used to make a wonderful chandelier. Required material:

• Thin rope
• Flammable liquid (alcohol or gasoline)
• Glass bottles (preferably colored)
• Edison lamps (having a beautiful spiral)
• Wire and electromagnet

Do it yourself

1. We wind a rope around the bottom of the bottle, having previously moistened it in a flammable liquid. Then we set it on fire and let it burst, and we begin to slowly rotate the bottle around its axis until the rope burns out to the end. After that, we lower the bottle into a container of cold water, wrap it with a towel and, with a little effort, break off the bottom.
2. To prevent the cut edge from being sharp, it must be sanded. To do this, it will be enough to twist the bottle in sand or fine gravel for a couple of minutes.
3. It remains to correctly mount the electrical cartridge, stick out the wire through the neck, screw in the light bulb. From the remaining bottles, the rest of the lampshades are made in a similar way.

This chandelier will perfectly fit into the interior made in any, especially if you hang it over the bar counter.

Decor from cans

Lamps made from cans are no less beautiful. They are made in a similar way as from bottles. The only difference is that the bottom of the jar does not need to be cut off, as clear glass is usually used for shades.

We need:

• Beautiful thick-walled cans (preferably with a relief pattern)
• Hammer and nails
• Wire, electric socket
• Spray paint
• Edison lamp

How to do it right

1. To begin with, using a nail and a hammer, holes are filled in a circle in the lid, after which the inner part is carefully squeezed out. The diameter of the circle must match the diameter of the base in the chuck.
2. We insert the cartridge into the cover, mount the wire.
3. Next, paint the lid along with the cartridge in the color of our choice. Metallic paint with a golden overflow will look best.
4. It remains to screw in the light bulb, close the lid and install the lamp in its proper place.

We all know what a globe is, but not everyone knows what delightful things can be made of it. For example, a nice lamp shade for a chandelier that will perfectly fit into the interior of a child's room.

Here's all we need:

• the globe
• Bulb
• Electric chuck with retaining element

Step-by-step master class

1. Usually, the design of the globe is not integral, so in order to get the desired element, it is necessary to divide it into equal two parts (hemispheres).
2. Further, at the top of the hemisphere, you need to make a hole for the cartridge. The best way to do this is to use a drill with a crown.
3. The electric chuck is installed in place and securely fixed with a retaining element. Congratulations, your chandelier is ready!

Suspended horn structure

Making a unique lighting device out of deer antlers is quite a simple matter, the main thing is to have the necessary material on hand.

Such designs are famous for their special sophisticated appearance and are best suited for high-rise rooms. Such chandeliers are used in many interiors, but they look especially attractive in country, chalet or rustic style.

As a rule, the shades of such chandeliers have different shapes, and only natural material is used for their manufacture.

We will need:

• Antler
• Rope
• Copper wire
• Electric socket and wire
• Bulb

To make a chandelier like this

1. Observing the safety rules, according to the diagram, we connect the wire to the electric cartridge.
2. Next, the wire needs to be beautifully wrapped with a decorative rope. For better fixation, you can use an all-purpose transparent adhesive.
3. With the help of copper wire, horns are attached to the bottom of the resulting rope, placing them 2 cm above the cartridge.
4. We repeat a similar procedure with the rest of the shades, then combining them into a single composition.

Ideas for making beautiful lamps (photo, video)

We hope that the useful tips and photos presented in the article will help you not only make beautiful shades for chandeliers with your own hands, but also save your family budget.