Tips of professionals: how scratching scratches on linoleum, various methods of correction of defects are removed. How to remove scratches on linoleum

Rolled floor coverings from polyvinyl chloride are inexpensive, but rather quickly lose the "commodity". That is why questions like, "how to remove folds on linoleum?" Many years have not lost their relevance, because to transfer the floors every three or four years I do not want anyone.

Below we will try to consider ways to extend the life of your outdoor coating and eliminate the consequences of the most common damage.

Prevention and preservation of coating integrity

Operating Rules

Any familiar Doctor will tell you that "the disease is easier to prevent than to treat." This statement is fair not only for the human body, but also for household appliances, furniture and finishes. The same applies to outdoor coatings - so that you do not have to find out how to remove the linoleum chances, or how to eliminate traces from cat claws, it is worth taking precautions in advance.

In order to avoid problems, it is worth following fairly simple rules:

• Linoleum is relatively small tensile strength, because the main "enemy" coverage is heavy furniture with metal legs. The slightest careless movement - and a hole with uneven edges is formed in the material.

Tip! If you can not replace furniture, it is worth using special lining From traffic jam or felt. They are glued on the base of the legs and significantly reduce the risk of damage.

• Second problem - deformation during long-term pressure. The wider the base of the furniture and the thicker of her legs - the less visible will be dents. So if you have a linoleum in your apartment, then it is worth a very carefully to choose the selection of cabinets and dresser. In extreme cases, use special nozzles with a wide base.
• Cats and dogs can also damage the coating claws or teeth. If you do not know how to wean a dog gnawing linoleum - treat " favorite place»Vinegar or white. The effect is practically one hundred percent!

Tip! In general, it is better to deal with the reasons for such behavior. Sometimes it helps just buy a toy pair or vitamin feeding.

• Sand, small pebbles and dirt adversely affect the coating condition in the corridor. Laying more durable models (commercial and semi-dimensional coating classes) will avoid fast abuse, as well as the use of dust and dirt rugs.

The above rules of operation of PVC coatings are very simple and easy, but their observance will ensure the desired effect.

Caring for the surface

In addition to compliance with the rules of operation, it can extend the service life of the linoleum:

• Protect the surface from most factors, maternally affecting the coating condition, can be done by applying special films. These films are produced on wax or polymeric basis, and give linoleum increased chemical and mechanical stability.

Tip! Film must be applied to dry and clean floor. Application is carried out in two receptions: first put the base, and then the finishing layer.

• In addition to protective films You can also use. Best of all, they are suitable for homogeneous coatings.

• Before doing wet cleaning Specialists are advised to go through linoleum with a vacuum cleaner or broom. So we remove most of the major mechanical particles with abrasive properties. And if we start rubbed the floor with a rag or mop immediately, these particles risk leave quite noticeable scratches.

Wet cleaning of linoleum usually does not imply the use of specific household chemicals.

The optimal instruction in this case has this kind:

• Instruct the usual floor washing liquid in the water, observing the recommendations from the manufacturer.
• Wipe the coating with a cloth moistened in the detergent solution.
• If necessary, repeat the operation until complete cleaning, periodically washing the rag and changing water.
• Give the surface a little bit.
• Wipe the linoleum with a damp cloth moistened in clean water - This will remove the remnants of the detergent.
• After drying, you can handle the surface of the mastic.

However, in some cases, a simple washing is not enough.

If the floor is very dirty, then apply special means for deep cleaning:

• We divorce the remedy in water, after which a cloth or sponge is applied to pollution.

Tip! In no case do not pour a concentrated solution directly to Linoleum: some of the colors will come together with contamination. Then disguise the resulting stain will be almost impossible.

• Withstand the solution on the floor for 10-15 minutes.
• Thoroughly rinse linoleum clean water And let it dry.

Since deep cleaning agents are very aggressive, then when using it is desirable, surface treatment is protective compositions or mastic.

Faced with stains

QUESTIONS on how to remove the smell of feline urine from a linoleum or how to remove the spot, "entering" into the coating, do not give way to popularity about the rules of operation.

So, what do you need to do in case of detection of stains?

• Fatty divorces are removed the easiest way: first we rinse the stain with a napkin, and then wipe the dishwashing liquid. In extreme cases (if the fat is a sleeve) we use turpentine.
• White raid relieves well to clean the tile. The main thing is not to leave fluid for a long time on linoleum, and immediately wash off with water.
• Coffee and food dyes leave fairly stable traces that need to be removed by gasoline or kerosene. At the same time, we take extremely gently so as not to discourage the surface.

Tip! Divorces that remain after cleaning can be removed by treating lemon juice.

But how to remove the smell of feline urine from linoleum?

• The first way is to use soda. We embarrass the soda to the "scene", wash the floor in 10 minutes and carefully wipe the floor.
• Alternative - Applying hydrogen peroxide. Packing bubble pour into plastic container, add liquid for washing dishes, process stain and leave for 10 minutes. Then wash the remedy with clean water.

The side effect of these two ways is that the cat with a high probability will no longer be in the processed place.

Repair of mechanical damage

Cuts and ruptures

Despite the fact that the price of linoleum is relatively low, each owner seeks to preserve it safe as long as possible. Empathy to detect on the surface of a hole that not only spoils appearance flooring, but also opens access to concrete base moisture and accompanying microbes.

The most obvious way is the full replacement of the linoleum.

However, in the presence of a certain skill, before that, you can not bring, eliminating damage to your own hands:

• If the cut is insignificant, then the easiest way to eliminate the resulting gap, lifting its edges and the bay under the coating of several drops of glue. The damaged area is pressed to the base and put the cargo on it.

• Also to eliminate linear cuts worth using cold or hot welding. The technology of its use is the same as when handling joints of rolls.

Large ruptures are repaired by replacing part of the coating:

• We put on top of the damaged area a small fragment of linoleum, combining the drawing.
• Slap with a special knife of both layers along the contour, getting a pay, which is ideal for the cut-cut hole.
• We remove the damaged area, the base under it is cleaned and the soil.
• We apply glue on the pay and place it in the cut hole.

Tip! To avoid looting the corners, it is worth lubricating glue and side surfaces Patch.

• We put on top of the repaired plot of Faneru with a cargo that can be removed in a couple of days.

Scratching

Unlike cuts, scratches appear quite often: when walking in shoes with metal knobs on heels, when moving heavy items with wolves, due to "close communication" with claws and domestic teeth.

How to remove scratches on linoleum, we will tell below:

• The easiest way to sweat tracks from mechanical damage to a special wax chalk. True, he leaves the tracks noticeable at a certain angle, and repairs require no less than once a week.
• More effective method - Putty damage to mastic. It can be purchased in a construction store, but can be made independently, mixing, colorless lacquer and trimming flooring.
• Mastics are applied to the affected site and thoroughly rub into scratches. Surplus remove pure rags.

Folds and dents

Another common type of coating damage is dents and folds.

It is quite possible to deal with them:

• Before removing bubbles on linoleum, check the clearance to at least 5 mm between the coating and the wall. If it is not - just cut the linoleum around the perimeter, and quite soon the material should be aligned.

• A small bloating can be pierced with a needle or sewing, releasing excess air. It is better to do it right away after sticking, because over time the elasticity of the material is reduced.
• The fold is the easiest to align, putting on it a board or paneur, and placing a small cargo above above.
• Celers are most often formed with long-term exposure of weight loads. In order for the material to deal with as early as possible, it is worth taking a small metal roller or a ball from the bearing, and roll the edges of the dent, returning them elasticity.

• If this does not help, then it is necessary to warm the damaged place in the iron: under the influence of high temperature, the material will become militant and quickly will take the original shape.

Tip! It is necessary to warm up the material either from the wrong side, if there is such an opportunity or through a multilayer laying of cotton fabric. In order to avoid damage to the coating, the gasket should be mixed summer alcohol, And Iron himself put on minimal heating.

And yet it is better before repairing not to bring, because without proper experience there is a risk that you only aggravate the situation.

Output

We hope that the above tips will be useful to you, and questions like "what to do if a fold was formed on the floor?" Or "how to bring the smell of feline urine from a linoleum?" Will not put you in a dead end.

Often scratches appear on linoleum. The causes are unequal: they leave furniture legs when moving or clawing animals living at home. The question appears, is it possible to fix it?

What is valid scratch?

What can not be caught hand on scratches, because, faster everything, they are not even visible? There are several negative points:

• reduced coating resistance;
• reduced working term;
• the outer beauty is lost.

The main thing! If a linoleum I managed to wear out thoroughly, and the scratches have become a massive character, then you need to be transferred to the coating.

Fast method

Remove flaws like this:

• The edges of the "wounds" are cleaned with a metal coin edge.
• Survey the depth of the defect. If the color of the coating has not been transformed, then the "wound" is shallow. In this embodiment, the scratch is smeared with wax.

For example, the process of removing scratches on the laminate is harder than on linoleum. Well, for the latter you can use bee wax.

Cleaning Defect

The lack of wax applying to restore the coating becomes the formation of a sticky surface that attracts dust, garbage and other minor items.

Professional way

Floor mastic

To remove the lack, you can use a professional method using linoleum mastic. Before running to the supermarket behind the mastic, it is necessary to find the remains of the linoleum to choose a means of shade. If the purchase of mastic in the store is not possible, or just a sorry for cash, you can prepare a similar means at home. For this B. outdoor glue Stir the nail polish of the optimal shade.

• In advance, scratches are clean and only after that they apply the prepared composition with a brush. The applied mastic leaves to dry for 1-2 hours.
• As soon as the mastic harvest, the surface is slightly primed by grinding paper with small grain.

If the needlework is used, then first it is tested on an unnecessary piece of linoleum. This will be possible to vary the color of the composition and its consistency, if it is not suitable.

Now you know how to remove scratches on linoleum and understand that it does not take a large number of time. You can personally return the previous beauty to the coating and increase its service, and Ignoring this will cause with some periods of still strong damage on site not very large scratch.

Even the most durable linoleum during operation can get significant mechanical damage leading to the formation of scratches of different depths. Such defects significantly spoil the appearance and reduce the overall strength of the product, which shortens its life. However, you should not immediately change flooring, In most cases, defects can be eliminated independently.

IMPORTANT. If the flooring has multiple defects or deeply breaks, it will not be able to save it.

Scratched linoleum - how to fix?

To the appearance of various defects on the outdoor coating, most often carried out: disruption of installation techniques, use of too soft lining or mechanical impact. Then the question arises - how to remove scratches from linoleum? Before proceeding to repair workFirst you need to evaluate the scale of damage. If damage is deep enough, it will be necessary to make a lot of effort, the holes will not be eliminated at all. To eliminate small damage, you will need only a few funds. It:

• Large coin.
• Wax candle.
• Mastic.
• Nail polish coating.
• Small pieces of material with a similar pattern.

As a rule, almost all materials are available at home and coating repair will not require any significant cash costs.

How to make a scratch on linoleum

There are several ways to eliminate coating defects: with a coin, wax or mastic.

How to wash scratches on linoleum with a coin

If the resulting defect has uneven fluffy edges, then it is necessary to use the usual coin. It is desirable that she was big size. For this, the edge of the coin must be carried out by scratch in the direction to the terrace. It is necessary to repeat this action until the mahra becomes one color with floor-coated. The defect will be smoothed significantly and will not be so noticeable.

REFERENCE. If you are too much to put pressure on a coin, then you can aggravate the situation!

With the help of wax

For small damage the ideal option wax will be wax wax candle. It is necessary to apply a thin layer first to the place of formation of defects, after which it is covered with the entire surface of the floor covering.

REFERENCE. The disadvantage of this option is that the wax with time is erased and the procedure from time to time will have to repeat.

With mastic

To eliminate defects there is a special mastic, which can be purchased in a business store or make yourself. When buying, the most important thing is to choose the right color, so it is desirable to take a small piece of linoleum to the store. There are also sets with mastic and collers, allowing home to choose needed color. Elimination of scratches is performed as follows:

• The edges of the defect must be cleaned from the existing dirt and dust.
• If there is a mahra, it needs to be lost.
• Scratches are degreasing.
• If the variant of mastic with a kel is used, it must be prepared. To do this, you need to add a dye that is suitable for color to the coating. The ideal coincidence of the shade makes the pigments included in the set. To get the desired color, you can take a few dyes.
• The resulting composition with a spatula should be applied to the place of damage. Surplus need to be removed.
• After the composition is dry, it needs to polish. This can be done using fabric or sandpaper with the smallest abrasive.

Mastics can be made at home. To do this, take a transparent nail polish and small pieces of linoleum. With the help of a coin from these pieces you need to make a chips and pour it into scratches. After that, you need to apply nail polish.

REFERENCE. It is advisable to check the nail polish first on a small piece of linoleum, as it can damage the surface.

Eliminate defects are not difficult. However, it is best to try to avoid their appearance, carefully belonging to the flooring.

Very often, during the rearrangement of furniture, and just during operation on linoleum remain small defects in the form of scratches, that is damaged protective layerGlossing shine coating. Fully remove this damage will not be possible, but it is quite possible to make it less noticeable.

The choice of the scratch removal method depends on the degree of damage. If the scratches have burcks at the edges of the scratch, first of all it is necessary to get rid of them. To do this, use a large coin, the existing burrs are a little, it will allow you to remove and make a less noticeable damage depth transition. This procedure should be carried out carefully in order to no longer damage the linoleum.

Next, the depth of damage is determined, and if the damage is superficial, and a layer with a picture is intact, then in order to remove the defect, it is enough to grasp it with wax or wax. If the coating is completely new, then the repair point must be slightly grated with wax and polish, and if there is no gloss, you will have to do this procedure on the entire coating area.

With a shallow scratch with damage to the drawing on the linoleum, it is possible to remove the light light on the coating using a special retouching pencil, its shade should be very carefully picking so that it does not differ from the shade of the floor covering. The entire length of damage is neatly sketched with a pencil, trying not to go out for the contours, after which the place of repair is treated with wax and polish.

With deeper scratches on the linoleum, it is a bit more complicated to remove them, since all previous methods do not give the desired result. There are special mastic for linoleum with color fillers, their tint will also have to carefully select. This means fill the defect, according to the instructions. Before starting such a repair, it is advisable to check the mastic on the invisible section of the floor or on the coverage residue.

In the absence of the required shade of mastic or in the case when it is not possible to purchase it, such a tool can be made independently. This will require the remaining linoleum after laying. You need to scrape upper layer Acute item, and this "dust" mix with glue for linoleum welding or transparent nail polish and this composition fill the place of defect. Such a means also need to be checked before applying so that the composition does not drive the coating, otherwise the defect will arise that it will not be possible to remove.

It is worth noting that the most scratches are noticeable on a new coating with a gloss, and it is possible to remove his small defects, regularly using special means for giving gloss.

If in one of the rooms of your home as you chose linoleum, then be prepared that it will be very soon to be subjected to various mechanical effects that contribute to the formation of all kinds of damage on its surface. And this is not avoided, no matter how good you contact your sex. Let's now understand how to remove from the barely noticeable flaws to the holes rushing straight into the eyes.

Materials and remedies

We moved a little with holes - they will not be able to remove them. You can smear with something hole, and then use the latest method of article. And for removal small flaws you should be at hand several funds that will help you get rid of damage:

1. Coin - the larger, the better.
2. Wax either wax candle.
3. Masty for linoleum.
4. Nail polish.
5. Trimming from this linoleum remaining after the flooring process.

Remove damage

With the help of a coin

So, decide how deep scratch. If there is a furniture on it at all, then why do something to do with it? If your flooring is torn to such an extent that the Mahra is visible from the protective layer, then there will be a little sweat. Take a large coin in my hand and, directing her edge to this terra, start rubbing and rubbed. Soon, the Mahra should take the form of the main, smooth and will not be so noticeable.

The disadvantage of this method is that if you overdo it, you can not just not get rid of damage on the floor, but also to do a huge hole in it!

With the help of wax

Further, the article will go on how to correct scratches on linoleum wax. If the floor is barely noticeable scratches, then it is then to use the wax coating. Apply the wax layer on these damage, after which, if there is an opportunity, cover the whole wax. So the lack of sex will become barely noticeable. But before making the smaller shortcomings to wax, make sure that this method will be practical for you, in connection with one-sole disadvantage (read below).

The disadvantage of this method is that you constantly periodically have to peat the entire floor in the wax room, since the wax layer will be erected with time.

With linoleum mastic

Take a wallet in your hands and go on construction market Or to the store where you need to purchase special linoleum mastic. If you have some pieces of pieces, then take them with you. So it will be easier to choose the desired color of mastic! Having bought it, read the instructions and recommendations on the label and strictly follow them. Soon there will be no scratches on your floor covering. This method is more professional, and from the shortcomings it is worth allocating the fact that if you do not have pieces from linoleum, then it will be difficult to choose a color.

How to make mastic yourself

If you are too lazy to go to the store, you can try to prepare self-made mastic. So, take either glue for linoleum, or the usual nail polish (it must be transparent). Next, you will need another important ingredient (actually, their only two pieces) are pieces of linoleum, which remained after the flooring. Take the same coin, pull the surface of these pieces and get a chips, the color matching with the color of your floor covering. After that, pour the chips on the damaged place, and on top cover it with a layer of transparent nail polish. The flaws did not happen!

Important! Before using self-made mastic, move away some piece of furniture, where the floor is immeasured. No, it's not worth doing scratches at this place. Just apply lacquer on and wait until he is completely dried. After the day, check how the nail polish on your floor covering is affected. Perhaps he adversely affects him and some flaret will remain at the lubrication site. If this is not, then boldly making your damaged places!

Conclusion

On this methods to remove scratches from linoleum ends. Be careful in operation of this and best try to avoid damage in prominent places. As you understood, it is almost impossible to get rid of them, and some methods allowing to hide flaws require repeat (as in the case of wax).