Already enough for a long time in the arsenals of anglers there are such lures as popper. This tackle shows excellent results when fishing for pike, therefore it received wide use among the fishermen of our country.

In specialized stores you can buy various options poppers, for any color and "taste". However, for anglers who like to put their hands to it, I want to offer an example of a popper from a pharmacy disposable syringe.

When minimum costs you can get a homemade, pretty decent catchy popper.

To make a popper from a syringe, you will need the following materials:

• syringe five cubes;
• wine bottle cork;
• two wires;
• two tees with winding rings;
• steel balls that can be removed from the bearing.

The process of making a homemade syringe popper with your own hands:

We proceed to the task at hand - to make a popper. We disassemble the pharmacy syringe and cut off unnecessary parts (we cut the nose, stem into parts and use only the middle). The actions can be seen in the photos.

Cylinders are cut from the wine cork, which fit the syringe in size and will be tightly inserted inside. To do this, with the help of a knife, excess pieces are cut in a circle before it turns out required size... In order not to be mistaken, you can draw a cutoff point with a ballpoint pen.

Then we push the small cylinder from the cork into the syringe to the very end, carefully pierce a hole in it for the wire. We send next the middle part from the cut stock. In the remaining cylinder we also make holes for the wires, as shown in the photo.

We put steel balls inside the syringe and push the cork. We twist the free ends of the two wires and make a ring for attaching the fishing line. We also bend the remaining free ends of the wires and create rings for attaching the hooks.

It remains to attach tees with winding rings and a homemade popper - the rattle from the syringe is ready. You can go to the river and try to catch a predatory pike, which loves to attack such baits.

Homemade syringe popper is ready

It only remains to add that when making a homemade popper from a syringe with your own hands, you can add something of your own and modify the homemade product, which will surely lead to an improvement in its qualities and catchability. You can add red hairs to the tees, you can also put chopped multi-colored foil inside, or come up with your own original equipment for this bait, or an original color.

A homemade airbrush from a syringe is an excellent household helper. This invention makes painting an easy process. Can be done at home homemade airbrush, because not everyone has the opportunity to purchase it in the store, especially since the cost of an airbrush is quite high. will be no worse than the purchased one. In order to make it, you do not need any special skills or abilities, and the parts that make up the airbrush can be found in any home. There are two ways to make a spray gun from a syringe: without a spray gun (this method is very simple) and with a paint spray gun (more complicated).

What is an airbrush?

An airbrush is the same spray gun (pneumatic tool) that is designed to spray a colorant. It is used in many areas of life, but due to its high cost craftsmen have already learned how to make an airbrush with their own hands.

Back to the table of contents

Method one (airbrush without a spray gun)

First of all, you need to collect everything the right tools... To make this type of airbrush you will need:

• a disposable syringe and a needle from it (its volume depends only on the desire of the master);
• clip;
• a thread;
• retainer - scotch tape or electrical tape;
• small container for paint.

The needle must be removed and heated over a fire so that it can be separated from plastic base... You need to remove the plunger from the syringe, first make the paper clip even, and then bend it at an angle of 90 °. Thread one side of the paperclip and needle tightly together. Then, using tape or electrical tape, fix the other side of the paper clip and the case. Moreover, it is necessary to fix the structure near the hole on which the needle was put on. Set the tip of the needle so that it is in the center of the syringe nozzle.

After that, the paint should be diluted so that it is liquid in a small container. Take the airbrush in your hand, lower the needle into a container with dye and blow hard into a wide nozzle.

Such airbrushes are called in the common people "rotoduvami". In order to make such a device, it will take 9-11 minutes and a minimum of devices.

Back to the table of contents

Method two (airbrush without paint spray)

This method is identical to the method described above, it differs in only a few details.

For manufacturing you will need:

Spray gun position: a - walls, b - ceiling.

• rod from gel pen;
• disposable syringe + needle;
• bar segment ballpoint pen;
• glass or plastic bottle, container for coloring emulsion;
• hot melt glue.

The whole process of collecting an airbrush takes place in several stages:

• cut off the writing part of the pen with a cone;
• cut off the sharp part of the medical needle;
• first dip the needle into hot melt glue and insert it into the cut rod so that its tip is visible from the metal part of the rod;
• the upper part of the syringe is attached to the bottle (a rod with a needle must be inserted into the body);
• make 3-4 holes in the lid for air access;
• the distance between the tip of the needle and the pen can be determined experimentally.

One of the benefits of this airbrush is the easy tank replacement.

Back to the table of contents

Airbrush with paint spray

In order to make a more convenient homemade airbrush, you will need the following details:

• pens (3 ballpoint automatic, 2 gel);
• pencil;
• metal empty bottle (you can take a bottle of cosmetics);
• syringes (2-3);
• solid wire;
• bolts 2 pcs. 3 mm each;
• nipple;
• small needle - 2 pcs.;
• glue.

First of all, you need to assemble the cartridge and the needle retainer. You need to make it from a syringe, a gel pen rod, a fountain pen spring and a bolt. Remove the piston from the body, lower the spring inward (it should be next to a thin nozzle), make a hole in the rod and insert a bolt, and they should be perpendicular to each other. This design is then inserted into the housing.

In the body of a ballpoint pen, you need to make holes on both sides with a hot knife: one is smaller and more round (about 0.5 cm), the second is larger and longer (about 2 cm). Next, a piece of wire must be bent to the stop of the trigger. Heat a needle suitable for the diameter of the wire and make two holes in the housing for the bent wire, insert it into the housing.

The next step is to prepare 4 pieces of 6 cm wire and bend them at right angles. These segments should be used to secure the air body, or rather its valve (made from a piece of ballpoint pen body).

Then you need to insert the body that holds the needle directly into the spray gun. It should be inserted without special efforts... The length of the rod of the gel pen is selected so that the rod rests against the bent wire, and the spring is compressed. To connect all parts, you can use epoxy resin, hot melt glue or regular super glue.

Next, you need to deal with the airbrush air valve, it will consist of a syringe without a piston, a needle, a spring, a piece of tube from a cylinder (air freshener), a nipple. All parts must be connected, pre-treated with glue.

For the trigger, you need an antenna, a piston head. It is necessary to connect two sections of the antenna with the cap, and insert a match inside with glue already applied to it. All parts also need to be coated with glue so that the structure is strong.

In order to make a paint sprayer for an airbrush, you need one syringe, an iron part of a medical needle, a part of a rod with an iron tip, and an air hose.

The tank for the coloring emulsion will be a can of deodorant, or rather its upper part, which must be cut off with a knife.

When all the parts are connected to each other, the spray gun can be considered ready. It is not difficult and not long to make it, the main thing is to have a desire. But if you don't want to mess around with a complex airbrush designer, you can completely use the first and second methods. So much time is not spent on them, and parts for their manufacture can be found in any apartment or house.

There is another way to make an airbrush with a spray gun from a can of deodorant. Moreover, an empty canister will act as a spray bottle for soft dispersion of paint or any finely dispersed chemical... For manufacturing you need:

• empty spray can;
• a syringe with a large capacity;
• a vinyl tube with a diameter that will fit the small nozzle;
• a compressor for creating pressure in the cylinder;
• gloves.

Remove the deodorant from the can plastic valve... Put the vinyl tube on the syringe, as close as possible to the base, and cut it in such a way that it can be further put on the syringe nozzle, but so that there is room for pressing the cartridge valve (that is, the length of the vinyl tube should be approximately 0 , 5 cm). Dial liquid paint and connect a piece of vinyl tubing to the can. In this method, the syringe acts as an element for filling the spray can with paint. In order for the paint to get inside the can from under the deodorant, you must press on the nozzle of the can and then on the plunger of the syringe. It is not difficult to calculate the volume of the refilled paint, it is enough to look at the volume of the spray can and the capacity of the syringe. For example, the volume of the can is 150 ml, the syringe is 10 cubes, which means that you need to pour 5 volumes of paint into the can. It is very important between refills not to forget to first squeeze the cylinder valve, that is, close it, and only then remove the syringe.

An adapter must be made from the plastic sheath of the medical needle, which will connect the balloon and the compressor. A small hole must be made in the sealed part of the cover, and the open part must be inserted into the compressor tube. Then turn on the compressor, put the adapter on the can, push on its nozzle and fill with air (for a 150 ml bottle - about 2 kg of air). Before painting, put on a plastic spray bottle and shake it.

I took the same sleeve as a basis. I wound three types of thread on it so that everything would freely enter the syringe. Then I cut out from some garbage, such as foam rubber, an insert into the sleeve. I stuck three different-sized needles in there and pushed it inside the sleeve. Not in the photo, but a couple of pins still fit in there.
At the syringe, I shortened the nozzle by half. He melted it with a lighter and flattened it against the blade of a knife. From the other end of the syringe he cut off the extra "ears" and also neatly trimmed with a lighter. The piston is shortened. He melted a hole in it with a wire and pulled a nylon thread through it. It turned out to be a cork on a string. So that she would not get lost, I tied the thread with tape to the syringe. I wound a nylon thread on the syringe itself so that it was. At the bottom of the syringe I put three small buttons, then a sleeve with threads and needles and plugged the whole thing with a cork. Beauty!

Now I don't remember exactly how many meters of thread I wound. Thin about 20 meters, nylon 6-10 meters. In any case, enough for the eyes, and there is almost no weight.
In my opinion, it turned out not bad. Everything is quite compact and sealed. Since the small scissors are in the medicine cabinet, I also added this sewing kit there.

Syringes are different sizes (even 150 ml.), and you can easily choose a container to suit your needs. It is possible to fold all kinds of NAZs and fish hooks and spices, but you never know what else? I think it's a little more convenient than pouring sugar and coffee into a cocktail tube. The containers are lightweight, sealed, compact, reusable, cheap and do not take long.
As an example, a couple of my containers.


Salt was poured into a small (10 ml) syringe. I don't need much with me yet, but just in case, that's enough.
A twenty-cube syringe contained 7 hunting matches and a teal glued to a piece of a wooden ruler.


When I buy a 50 ml syringe. I will make a container for sugar. My wife and I just have enough tea and a little left. It will be easier than carrying a full jar with you and freeing up space in the pot.
I hope this post is helpful. Advice, suggestions, additions and criticism are welcome.

Fill the eclairs with cream. If there is no such product, then you can create it yourself. How to make a confectionery syringe with your own hands? This work can be done from various materials at hand.

Terms of use

The set with the cooking syringe has various attachments:

• Smooth cut.
• Oblique cut.
• With teeth.
• With asterisks.

The attachments allow you to create wonderful culinary masterpieces. Syringes are needed to decorate cakes with various patterns - flowers, leaves, inscriptions, a net, a border. To create a rose, you need to take a piece of biscuit, align the edges, put it on a fork and coat it with cream. Then you can do the petals. You must take the plug in left hand, gradually turn over, and with the right - create petals. Small petals should be made in the center, and larger and higher at the edges. With another fork, the rose is removed and placed in the right place on the cake.

The cone-shaped nozzle is used to create leaves. The device with a flattened end allows you to get bows, ruffles, lambrequins. There are nozzles for creating smooth and grooved stripes. They allow you to create a wicker basket. Narrow nozzle with even cut serves to create an inscription and obtain a lace pattern, smooth, wavy lines. Other decorations can be made. The cake will be more beautiful if you use different colors.

Polyethylene

You can make a do-it-yourself confectionery syringe from polyethylene. The material should be dense and transparent, with a zip fastener. You will need scissors to work. The procedure is performed on the basis of the following steps:

• You need to open the bag, fill it with cream.
• Then you need to fasten the fastener or fix the package with a knot.
• Then you should cut off the corner of the bag.

This product is not considered multifunctional. For example, it is unlikely to be able to perform the same thickness with it. This also applies to figured decorations. But if there is no other way out, then such a bag is suitable for decorating a cake.

Paper

A do-it-yourself paper confectionery syringe provides more options. The basis can be confectionery parchment. For thick paper, a curly corner can serve as a nozzle. To get the product, you need to cut a triangle and roll it into a cone.

There should be no gaps between the layers of paper as cream can pass through them. Then from above you need to fix the edges by bending them towards the center. The bag should be filled to the top. It is imperative to cut off the corner: the hole will serve to squeeze out the cream. The device can be used to decorate cakes.

Plastic bottle

DIY pastry syringe from plastic bottle will allow you to create beautiful roses and other decorations. You will need a curly nozzle from a plastic bottle. To create a product, you need a knife, a marker, a pastry bag.

The procedure involves the following actions:

• Cut off the neck of the plastic bottle.
• The required pattern should be drawn on the lid, and then cut out.
• It is necessary to screw the cap on the neck, fix the curly nozzle on the bag made.

This completes the do-it-yourself confectionery syringe. Using this method, you can create several nozzles so that you can perform various cake decorations. In addition to the cap, caps for nasal spray can be nozzles.

Use of fabric

You can make another confectionery syringe with your own hands. With a photo, this work will be much easier. The device can be sewn from fabric. The material should be easy to rub off. It is advisable to purchase white color, since colored ones can fade. Dense teak is perfect, as it is durable, natural, it is easy to disinfect at high temperatures.

A triangle must be cut out of the material, 2 sides must be sewn. The size of the product can be any, the main thing is that the necessary portion of the cream is placed in it. The tip should be cut to the size of the attachments to be used. For this, both purchased attachments and homemade ones are suitable.

The seams must be tucked up and hemmed. It is advisable to do work on sewing machine, because this way the product will be reliable. The fixture is ready for cake decorating. It can be reused if washed and dried after each procedure.

Using a mayonnaise bag

A bag of mayonnaise will help replace the pastry syringe. It is necessary to cut off the bottom of the package and then wash the product inside and out. In the other part there is a hole for squeezing out the cream. This option will allow you to perform, albeit simple, but beautiful jewelry... For this, packages from other products are also suitable, for example, from condensed milk, jam, mustard. Only the product must be absolutely clean.

File Application

You can use a stationery file to get the confectionery tool. Such a product is more suitable for single use. Its corner part must be filled with cream, and the corner must be cut off. By pressing on the contents, you can decorate the cake.

Oilcloth

To create such a product, you will need a triangle of oilcloth used on the farm. It is connected with wide tape to make a cone. The corner must be cut off so that the nozzle is fixed in the hole. Such a simple device will serve to decorate cakes. Its only drawback is that such a bag is disposable.

Using any of these methods, you get a practical do-it-yourself confectionery syringe. At home, you can create beautiful cakes and pastries. To facilitate the work of decorating pastry, you need to use the following tips:

• Using a bag, patterns should be done with the left hand, and with the right hand you need to hold and squeeze it a little.
• You do not need to immediately start performing complex landscapes, first you need to learn how to create something simple.
• Dots should be applied with a round nozzle.
• Asterisks are obtained with a curly nozzle.
• So that when working in the hand there is no tremor from tension, under the right left hand must be used as a support.
• When creating small patterns or lettering, the nozzle should stick close to the baked goods.

Making cakes is fun. It is important to adhere to accuracy and caution in it. The modern confectionery industry is rich in a variety of decorating tools. Store products contain dyes, preservatives, additives. If you learn how to make cakes on your own, then you can enjoy delicious and healthy homemade cakes. And a handmade bag will help to decorate your masterpieces, making them even more appetizing.

In this material, you will be presented with a method of making simple pneumatics from syringes.

So, we need:
- glue gun;
- juice straw;
- stationery knife;
- 2 large syringes.

Take the first syringe and cut off the nose at the very base.

Next, you need to make a hole between marks 5 and 10.

Now the spout, which we cut off at the very beginning, needs to be glued to the hole. This must be done very carefully so as not to accidentally seal the hole.

Next, we take the second syringe. It needs to be glued in the place where the nose of the first syringe was. According to the author, a normal joint will allow air to pass through, so it is imperative to use glue for better sealing.

The pneumatics are ready. It can be used in two ways: either glue the tube and shoot the balls, or do without the tube and shoot cartridges made from needles.

With the first option, everything is clear, so let's move on to making cartridges from needles. This is done very simply. We take a needle and put it on any syringe.

We put the nozzle of the needle into the turned on and hot glue gun and pull the piston, thereby sucking in some amount of glue.

After a while, the glue will harden and cover the hole in the needle, preventing air from escaping from it.

To shoot from homemade pneumatics, you need to put a sealed needle on the syringe nose and pull out the plunger of the second syringe. Next, push the piston of the first syringe so that it closes the hole behind the needle and press on the second piston. Thus, pressure is created. To fire a shot, you just need to release the piston that closes the hole.