Instruction manual

The easiest way is to buy any “descaling agent” in the store and clean it following the instructions. Such a tool is usually worth it. But, if you want to protect your health from accidental ingestion of chemicals in the body, it is better to use natural remedies.

Boil the resulting solution and leave for at least two hours, and if possible, then overnight.

After pouring the solution, rinse the kettle thoroughly with running water and boil again to remove residual vinegar and scale.

In addition to acetic acid, citric acid can be used to combat scum - 1 tablespoon per 1.5-2 liters of water. Pour acid into the kettle, pour hot water and leave for 15-20 minutes. Boiling the solution is optional. If the raid was not very strong, then after the specified time the kettle will sparkle like new.

If there is no citric acid and vinegar in the house, do not despair. This may be unexpected, but in the past, grandmothers got rid of with the help of the ordinary!

Take clean potato peelings, cover the bottom of the teapot with them and add 1.5-2 liters of cold water.

Drain the cooled water and rinse the kettle well with tap water.

If you are still unhappy with the result, try another very extravagant remedy.

Use a special pencil for descaling. Heat the iron to 100 ° C, evenly apply the product on the sole and leave it in this state for several minutes. Then remove scale  cotton cloth. Pour into clean water and clean holes with steam.

Remove scale  with iron table vinegar. Prepare a solution of 1 cup of water and 1 tablespoon of vinegar. Pour liquid into the iron and turn on the steam function.

Descale the washing machine with a special product, such as Anti-scale. You can buy it at the hardware store. Before use, read the instructions or consult your seller.

Pour the product into the washing drum, set the mode at a temperature of 60-90 ° C. To prevent the formation of scale, carry out a similar procedure regularly - once a month. If your city or area has poor water quality, do it every time.

Tip 4: How to descale a kettle with improvised means

The scum in the water appears due to the content of a large amount of salt and impurities in it, which settle to the bottom, walls and heating element of the electric kettle. If not on time, then this can affect a quick breakdown, or the process of heating the water will be longer. In this case, scale affects the body negatively, destroying the kidneys and the genitourinary system.

The easiest way to remove limescale with citric acid. To clean the scale, you need to buy one bag of food citric acid. Pour acid into the kettle. Pour cold water into it and leave for several hours. Then pour everything from the kettle, pour fresh water and boil several times.

If citric acid did not cope with the scum, then add 100 g of 9% vinegar to the water kettle, then boil this mixture, pour it and rinse the kettle thoroughly.

Fanta, Sprite or Kola sparkling water is suitable for descaling. From them it is necessary to remove the gases, pour the kettle 1/2 and boil.

Potato peeling along with apple peel are also suitable. They should be washed, put in a kettle with water and boiled several times.

If the kettle is high in scale, then you can do the following procedure: Pour a full kettle of water, add 1 tablespoon of soda and boil for 30 minutes. Change the water, add 1 tablespoon of citric acid and also boil for 30 minutes. Change the water, add 150 g of vinegar, boil. With this method, the scale will become soft and must be removed with a sponge.

Related videos

Tip 5: How to descale a stainless steel kettle

Limescale deposits in water not only make it hard - when boiling, substances settle inside the kettle, forming scale on the walls. Scale will form on it less or more often, depending on the material of the kettle.

In stainless steel, scale builds up somewhat more slowly. But it still cannot be completely avoided. Limescale slows down the process of boiling water, and if, then it takes a lot of electricity. Deposits can harm not only the teapot, but also the person who drinks the water boiled in it. Filters mounted on the nose help little in solving the problem.

Limescale Prevention

The best way to fight the scum is to prevent it from forming at all. The rules that must be followed for this are quite simple. For boiling, you need to use soft and clean water, passed through a filter or settled. Boil a portion of water once. Water that has already boiled should not be heated - it is better to replace it with fresh. Before each use, it is advisable to rinse the kettle well from the inside, rinse off the resulting white flakes, and the kettle walls should be cleaned often of plaque.

Means for descaling

In hardware stores you can buy quite effective anti-scale products, such as Silita, Antinakipina. Their application is almost the same: in general, the funds should be poured into a kettle, pour water and boil. After about fifteen minutes, rinse the kettle with clean water.

If a reddish scale forms during boiling, citric acid will help. But for enameled it is better not to use it. Prepare a solution from a liter of water and a teaspoon of acid, boil it. Leave on for 10 minutes and boil again. If the plaque still remains, after the second boiling it is not necessary to drain the water - it is left for another couple of hours.

You can clean a stainless steel kettle with a mixture of vinegar and soda. Suitable for those who can easily tolerate the smell of vinegar. Mix soda with water until gruel and rub into the walls of the kettle. After this, moisten the cloth with strong vinegar, wipe over the slurry. Soda and vinegar react, and you can very easily.

The scum can be removed using soda water - Coca-Cola or sprite. Pour the liquid into the kettle, boil and leave for about 10 minutes. Then drain everything and rinse the kettle. For a white teapot, it is better to use a sprite - so that the dye does not spoil the whiteness.

Whatever tool is chosen - soda, soda water or specialized household chemicals - descaling must be done regularly. Then the cleaning is much easier, and the scale will be formed much less.

Tap water, which is poured into the kettle, contains a large number of different salts. They gradually settle on the inner surface and on the bottom of the kettle, resulting in scale formation. It must be removed regularly - there are a lot of funds for this, and you can choose any convenient method.

You will need

• - a household cleaning product for descaling;
• - vinegar;
• - baking soda;
• - lemon acid.

Instruction manual

Pour a special descaler into the kettle. It can be "Antiscale", "Antiscale" or other household chemicals with a similar effect. They are very easy to use - you just need to fill them with water and boil. This method can be called the easiest, but at the same time it is far from the most useful. Cleaning products contain many chemicals that, after repeated rinsing, may partially remain in. Their ingestion is a danger to the body.

Try descaling in a safer way - using the usual. Boil water, add three tablespoons of soda to boiling water. After that, the water should cool. After about half an hour, boil the kettle again. Pour boiling water, and fill the kettle with hot water with the addition of a couple of tablespoons of vinegar essence. Boil water again and cool the kettle. After carrying out these measures, the scale becomes loose, it is very easy to remove it with an ordinary dishwashing sponge. This method is good for the running. No matter how thick the scum layer is, it begins to recede with thin plates.

Take citric acid - two bags are enough for a standard three-liter teapot. Pour the powder into cold water and boil. Leave the water in the kettle for about half an hour, then drain, pour fresh and boil again. Acid easily splits scale. After this, the kettle will need to be thoroughly rinsed so that there is no taste left. This method is perfect for descaling both in simple and in. But for metal dummies, citric acid is contraindicated. In the process of dissolving scale, the acid makes the inner surface of the kettle rough, and a new scale will form in it much faster. With a thick crust of scale, citric acid can not cope.

At the moment, the electric kettle has become a decoration of the kitchen and an indispensable assistant, however, as a result of repeated use, such a problem as scale can occur. If you do not remove the scale, then it can cause an unpleasant taste of the water, and also lead to damage to the appliance. In order to descale in an electric kettle, you can use the following tips.

A plaque forms on the heating element of the kettle and its walls, which is an ordinary salt deposited on the surface. Before cleaning, you need to figure out what is the cause of the limescale. Sometimes it’s the quality of the water: then you need to replace it with a better one.

In order to remove scale, you will need the simplest products that most housewives have in the kitchen.

1. You will need 2 tablespoons of vinegar and 50 g of citric acid: pour vinegar into the teapot and then pour the lemon, boil the teapot and leave it with this mixture for 60 minutes. After the specified time, the coating can be easily washed off with a sponge. If the first time there is a raid, then you can repeat the procedure. Sometimes lemon is used instead of citric acid.

2. Soda is a great way to clean an electric kettle. First, pour water into the kettle, then pour 1 tablespoon of table salt there, boil the water and leave for 30 minutes, then pour water into the kettle again, add 0.5 teaspoon of citric acid and put it on the fire again. After the water has cooled, you can start washing the kettle with a kitchen sponge.

3. Vinegar also helps clean the kettle: pour a third of vinegar and two parts of water into the kettle, why boil the water and let it cool. The scale in the kettle will dissolve under the influence of acid, then it can easily be washed.

4. One of the most unconventional methods of purification is the use of ordinary sparkling water. Pour water into a kettle, bring to a boil, and then drain. After this manipulation, the calcareous deposit should depart.

5. Keep in mind that in stores there is a large amount of household chemicals for cleaning lime scale. Sometimes such tools are quite expensive, and the result is not so effective, so you can use the methods.

Consider the following points:

1. After carrying out the cleaning procedure of the electric kettle, it must be washed, otherwise the substances that you used for cleaning can enter the body along with drinks.

2. The best tool in the fight against scum is the daily care of your electric kettle.

Related videos

An enameled kettle is a very beautiful, convenient and most common type of kitchen utensil. Even if the kitchen has a home water filtration system, it is completely impossible to avoid solid deposits on the walls and bottom inside the kettle.

The filter significantly reduces the concentration of impurities and salts of calcium and magnesium, but over time an insoluble precipitate forms in the process of heating the water, raising the quite expected question - how to remove scale in an enameled kettle.

Upon first heating in a vessel, the salts contained in the water precipitate and first form a loose base. With each further boiling, it becomes denser more and more, creating a strong layer of plaque.

The most important argument is taking care of your own health. The smallest particles of sediment, falling into a cup, and then into the body clog the intestines and lead to many unpleasant diseases.

How to descale an enameled kettle

The problem is quite common and was relevant many years ago, when there was no talk of filters designed to purify water.

To date, there are three answers to the question of how to clean the enameled kettle from scale:

• Mechanical method;
• The use of special tools for cleaning appliances;
• Using valuable knowledge in order to clean at home.

Mechanical - at first glance, the easiest way to remove formations using a wire brush and cleaning paste. With sufficient intensity, mechanical action will remove even the most stagnant layer of solid deposits.

This method is not without drawbacks:

• The process of exposure takes a lot of time and requires a lot of effort;
• Together with the coating, the coating is removed, forming cracks;
• In the future, the scale in these defects will become stronger and more difficult to remove.

Departments of household chemicals are full of a variety of cleaning products, the instructions of which clearly describe how to descale an enameled kettle. As a rule, the names speak for themselves - “Anti-scale”, “Anti-scale” and others. The composition of these powders contains acids, by means of which a solid precipitate is removed. Using them is simple, following the instructions on the packaging.

Home recipes

Lime deposits are successfully removed by natural means, which every housewife will find in the kitchen:

1. Lemon acid;
2. Acetic essence, table, apple cider vinegar;
3. Baking soda.

Citric acid is an amazing assistant in how to descale an enameled kettle. The excellent solubility, the absence of toxicity and the ability to effectively remove hard deposits make crystalline powder the leader in homemade anti-scale products. In order to descale in an electric kettle, you can use the same means.

For this, it is necessary to dilute five tablespoons of citric acid in two liters of water, and bring the solution to a boil. It is not necessary to boil and after 15-20 minutes you should make sure that the process of peeling of the plaque is successfully completed.

If the desired result is not achieved, it is necessary to clean it again with citric acid. Before draining the old solution and rinsing the kettle, it is necessary to cool the vessel, otherwise the enamel will crack.

After all solid deposits have left the walls and the bottom, it is necessary to wash the vessel with a soft sponge and loosened particles (if any) are easily removed. In order to remove the remains of citric acid you need to boil clean water 2-3 times.

Vinegar - acts on a similar principle. Acetic acid actively breaks down solid deposits.

• For 2 liters of cold water you will need a glass of 9% vinegar;
• Leave the mixture for half an hour;
• Then bring to a boil and boil for 5-10 minutes;
• Rinse the kettle thoroughly under a strong stream;
• Boil fresh water “empty” several times.

The only drawback of vinegar is its strong specific smell. But at the same time, so you can clean the kettle from stainless steel

Peel of vegetables

Potato peels contain a large amount of organic acids, even more than in the tuber itself. It is the peel that helps to solve the problem than to remove the scale in an enameled kettle.

For this purification from two fruits is added to a vessel, poured with water and simmer for 1-1.5 hours. It should be noted that a deep layer of solid particles is only slightly softened, but does not completely dissolve.

For the same purpose, use apple and lemon peel.

Some people recommend using carbonated drinks instead of these products (Coca-Cola, Sprite, etc.). They are really able to cope with a small layer of gray plaque and all because carbon dioxide is added to the composition with the formation of weak carbonic acid.

The concentration is small, so this method is irrational, due to the high cost of drinks.

Cleaning the enameled kettle from scale using any selected method is carried out in several stages and continues until a satisfactory result is achieved.

The cleaning procedure should not be delayed - it will be a good preventive measure.

It is more advisable to wash the kettle every two weeks and spend 5 minutes on it, than to then fight with the long-standing deeply scum.

How to deal with old scale?

Let's see how to descale soda. Soda in this case will be one of the stages of the fight against obsolete plaque. She does not completely remove it, but only softens the ingrained areas.

• Pour water into a kettle and bring to a boil;
• Add 2-3 tablespoons of soda;
• Stir and let cool;
• Bring to a boil again and drain the water;
• Without washing, pour a new portion of water and add two teaspoons of vinegar essence or a bag of citric acid;
• Allow to stand for 30 minutes.

After this procedure, solid deposits easily depart from the walls and bottom. To achieve maximum effect, wash the kettle with a soft sponge, rinse well and boil clean water in it 2-3 times.

Video on how to descale an enameled kettle

Even if you use filtered or bottled water, pouring it into a kettle with a cleaning system, sooner or later you will have to deal with such a problem as scale in a kettle. In this article we have put together the most effective ways to deal with it, the fastest and most harmless to technology.

What is scale and why must it be removed?

Sometimes on the Internet you can come across the opinion that it is not necessary to remove scale - it carries a purely visual defect, which plays a role only in glass teapots. Such a statement is fundamentally false.

First of all, you need to understand how the scum appears. Most often, ordinary running water is used for boiling, which contains a lot of impurities. However, they are in both bottled and filtered water - however, in smaller quantities.

Most of them are various salts, which, when heated, are separated into carbon dioxide and solid sodium precipitate, which remains on the walls of the dishes. However, it is not washed off with ordinary water and has the ability to accumulate.

  The problem of scale is not only in an unaesthetic appearance

Such a plaque harms your teapot: it impairs thermal conductivity, which means that you will have to spend more time on heating. Because of this, in ordinary kettles, the layer of ceramic coating is gradually thinning, if any, and in electric kettles, heating elements quickly fail.

However, this factor can be considered rather secondary. The main reason you should fight limescale is potential health damage. Since plaque consists of sediments of salt, insoluble metals and various harmful impurities, including chlorine, the sediment entering the body can contribute to the development of various diseases. The mixture can cause arthritis, gout, osteochondrosis, kidney stones, or toxicological poisoning.

That is why you need to clean the kettle from plaque regularly. In the following sections, we will talk about how to do it right.

How often do I need to clean the kettle from scale?

The answer to this question depends on two factors - the type of heater and the quality of the water you use.

Glass teapots need to be cleaned almost every week: any coating, even the thinnest, is visible on a transparent surface. But metal or ceramic can be cleaned of plaque about once a month - as it gets dirty.

In addition, kettles with an open heating coil need to be cleaned more than those in which the heating element is closed. Otherwise, the device will fail faster.

As for water quality, then see for yourself. Bottled or well-filtered water pollutes the kettle less, however, it is not a panacea - only distilled water gives absolutely no sediment, but we do not recommend drinking it to anyone - this is too bad for your health.

The quality of tap water depends on the water supply service, its source, and even the condition of the pipes in your home. Sometimes it’s enough to clean the kettle once every couple of months, and sometimes after a week a thick layer of scale forms in the tank.

Therefore, the decision on the frequency of cleaning your kettle is up to you to remotely give an exact answer.

How to prevent scale formation

You can hardly completely avoid the appearance of precipitation - unless you really use crystal clear water, with a minimum of heavy impurities. However, it is quite possible to reduce the amount of scale.

• First of all, if the quality of water in your home leaves much to be desired, get a good water filter. Whether it will be, cassette or in-line, you decide. Personally, we recommend a nozzle for a crane - today it is considered the most effective and economical option.
• Do not leave water in the kettle. After drinking tea, part of the water is not used? Pour it out. This will greatly facilitate the care of the kettle in the future.
• Try to regularly wipe the kettle with a soft sponge dipped in soapy water. If there is no old plaque on the surface, you can remove particles that have not yet adhered, which eventually turn into a persistent precipitate.

Tip: Even if you do not have the opportunity to purchase a filter, try to defend the water before boiling. A day will be enough.

If it was not possible to completely avoid the appearance of scale or you need to clean the old kettle, we recommend using our recommendations.

Method 1: Clean the kettle with citric acid

A commonplace food product worth a couple of rubles, which can be found in any kitchen, can easily cope with mild and moderate scale. The procedure is not very complicated: fill the kettle two-thirds with water and add citric acid. Powder should be scattered at the rate of one tablespoon for each liter of water.

  Citric acid is one of the most affordable ways to descale a kettle

Then turn on the kettle and wait for the water to cool. Drain the water when it has cooled to room temperature. Then wipe the kettle with a soft sponge. If necessary, the procedure can be repeated two to three times in a row until the scum is completely gone. After that, boil the kettle again with clean water and wash it thoroughly.

The method is effective, but it cannot cope with the old scum that has eaten into the surface. In addition, it is not suitable for enameled dummies - the surface of the latter may tarnish from the aggressive effects of citric acid. But it can be used for both ordinary and electric kettles.

findings: Effective, budgetary and very simple method.

Method 2: Clean the kettle with lemon

For those who prefer to use the most natural products in the kitchen, citric acid can be replaced with lemon. As in the previous method, you should not experiment with enameled kettles if you do not want the enamel to change color or crack.

Cut the lemon into thin slices and place in a teapot filled with cold water two-thirds. Then boil it. The following procedure is different for conventional and electric kettles.

  The most environmentally friendly way to clean the kettle

In the first case, it is necessary to wait for the water to boil, and then keep the kettle on a small fire for 20-30 minutes.

For an electric kettle, you need to boil it several times, after the water cools down a little - on average, reviews recommend three boils with an interval of 10 minutes.

After the water has completely cooled, drain it, and wipe the kettle with a soft sponge to remove any residue. Most often, a second procedure is not required, but if necessary, you can boil the lemon again. Bonus is a pleasant aroma that will spread throughout your kitchen.

Method 3: Clean the kettle with vinegar

First of all, it should be noted that this technique is not suitable for electric kettles: vinegar can be used only for ordinary metal. However, for them, this method is very effective and convenient.

As in previous cases, you need to fill the kettle with two-thirds. Add vinegar, about half a glass per liter. If you use concentrated essence, one and a half tablespoons will be required for the same amount of liquid.

  Carefully measure the amount of vinegar

Boil water and let cool for one hour. Then just drain. Wipe stubborn stains with a soft sponge - they will move away. After cleaning, you need to boil a kettle with plain water two to three times.

Important: Please note that vinegar emits a very sharp aroma when heated, so you need to carry out the procedure only with the windows open or the powerful hood turned on.

Method 4: Clean the kettle with soda

Inexpensive and safe for health way to get rid of even the oldest and toughest scale - the use of baking soda. It is suitable for all types of dummies, including enameled ones.

  It’s important not to overdo the soda in the kettle

However, use soda carefully - it can scratch the surface, so do not just try to wipe it with plaque. In addition, in order to get rid of the old scale layer, you will have to repeat the procedure at least three times.

Add half a teaspoon of soda to half a teapot of water (no more!). For an ordinary kettle, it is worth boiling water for half an hour. For electric, it is necessary to turn on the boiling mode several times. Forum users claim that three to four times is enough.

Method 5: A mixture of vinegar and soda to clean dummies

As everyone knows, a chemical reaction occurs when soda is added to vinegar. You can use it to clean the scale from the kettle, but be careful - just pour vinegar over the kettle and pour soda on it. Such aggressive action will damage the tank.

  Soda and vinegar when mixed give an active chemical reaction.

You need to fill the kettle two-thirds and add one tablespoon of soda per liter of water. Then pour half a glass of vinegar into the tank or add three tablespoons of vinegar essence.

Bring the water to a boil and hold the kettle on low heat for half an hour. Then wipe off any dirt with a soft cloth. This method is not suitable for electric kettles, but it perfectly cleans old scum from ordinary ones.

Method 6: Remove old scum with soda, vinegar and citric acid

This method cannot be called gentle: it acts very aggressively on the surface, so it can be used only if the kettle has not been cleaned for several months and a thick layer of scale has appeared inside.

This method is only suitable for the oldest scale.

In order to clean the kettle, you will need to boil water in it three times for 30 minutes. The first time - with a tablespoon of soda, the second time - with a tablespoon of citric acid, the third time - with half a glass of vinegar. For each case, water should fill the dishes by two-thirds.

After the last boil, gently wipe the kettle with a sponge, and then boil it several times with clean water. It is very important to ventilate the room well during the cleaning process, as vinegar emits an extremely unpleasant odor when heated.

Method 7: How to clean the kettle with Coke, Sprite or Fanta?

Oddly enough, however, this method has a right to exist.

First of all, a few rules:

• Do not use this method for electric kettles with an open heating coil - the sugar contained in drinks will do it much more harm than scale.
• For enameled surfaces, choose drinks without dyes, otherwise the shade of the container may change in a completely unpredictable direction.
• If there are scratches inside the kettle, the method should also be discarded - dyes can eat into the damaged surface.

The cleaning process itself is quite simple. Fill the kettle halfway with a drink and turn it on. Leave it on for 20 minutes after the liquid boils. Drain and rinse it with clean water.

  Cola is not only a drink, but also a great cleanser

It sounds incredible, but in this way you can even clean old scum. However, another question arises here - how safe is it to drink such drinks if they remove what aggressive detergents do not always cope with.

Method 8: How to clean the kettle with apple peeling.

Another method from the category of "Incredible, but true." It does not always work: if the scum is old, it will not work out in such a way. But with a plaque that just appeared, the method works perfectly. In addition, he is considered one of the most sparing. It can be used for glass teapots - it is both environmentally friendly and will help give them shine.

  The method is suitable for fans of economy: no waste!

Just boil two handfuls of apple peels in half a teapot of water for 20 minutes. For electric kettles, you can turn on the boiling mode 2-3 times. Then leave the appliance for two hours. After that, you can drain the liquid and wipe the kettle from the inside with a soft cloth. Rinse it well - a clean kettle is ready to use!

Method 9: Use brine to clean dummies

Frankly, this method is for everybody. It's hard to imagine a person who likes the smell of boiling brine. However, if you are not sensitive to aromas and the naturalness of the product is important to you, you can experiment.

It is necessary to pour the brine into the kettle, boil and leave for half an hour. Then drain the brine and rinse the kettle with clean water.

  Not everyone will like boiling brine.

True, not every brine is suitable - only one that contains vinegar or citric acid. It is due to their action that the effect is achieved. But here the question arises: why boil the brine, if you can just use acid or vinegar?

Method 10: Descaling Chemicals

If a quick result is important to you and you do not want to experiment with your own kettle, you can just go to a hardware store and purchase a descaler.

Anti-scale, Cinderella, Glitter ... There are many options, for every taste and budget. We recommend that you carefully study the composition: some drugs should not be used, as they can have an aggressive effect on the surface of the kettle or cause harm to your health.

  If you do not want to experiment with a teapot.

On the other hand, most safe products contain the same citric acid or soda as the active ingredient. So is it worth it to overpay?

In any case, you can use any of the methods given by us - depending on the type of your teapot, of course.

Over time, almost all the water in the kettle leaves a limescale. It manifests itself in the form of deposits of salts on the walls of a kettle or heating element, if we are talking about an electric kettle. In any case, this phenomenon adversely affects the operation of the ten, the appearance of the product. That is why every owner of a heating device periodically encounters the problem of how to clean the kettle from scale.

In addition to the fact that the scum looks ugly, spoils the look of the kettle, its presence harms the family budget:

• due to limescale, a longer time interval is needed for the kettle to boil;
• the presence of scale quickly puts the kettle out of order;
• when descaling, the electric kettle may turn off spontaneously;
• the presence of scale spoils the color of water, affects the quality of drinks made from it (tea and coffee).

Descaling Methods

You can remove scale in a teapot in several ways, both folk and using special tools.

Household chemicals

Household chemical stores offer a wide selection of descaling detergents. An instruction is attached to each of them. Most often, the product is added to the kettle along with water and a certain period of time is boiled. The names of all are almost the same: "Anti-scale" or some derivatives. When choosing a tool for an electric kettle, pay attention that there are certain additives that prevent the destruction of metal elements.

Before the advent of special products, each housewife used her own, proven over the years, which is available in every kitchen. Consider the most popular.

Lemon acid

Descaling with citric acid is easy. This is the way that helps in solving the problem of how to clean the kettle from scale. To do this, add 100 g of citric acid to the kettle and let it boil. The liquid in which citric acid is dissolved is not poured. She should stay in the teapot for several hours, preferably until completely cooled. After a certain period of time, the liquid is drained, and plaque loose from the action of citric acid is removed.

In the absence of citric acid, it can be replaced with lemon slices. To remove plaque, 3-4 segments are boiled in a teapot and lemon water is left until completely cooled.

Food vinegar

To remove scale, you can use not only ordinary vinegar, but also its other derivatives, for example, apple. However, this method cannot be used for electric kettles.

The technology is simple. Pour half a glass of table vinegar and boil for 10 minutes. After the kettle is well washed and easily descaled with a hard sponge, the appliance can be used to make hot drinks.

Baking soda

Ordinary baking soda in the amount of one tablespoon is poured into the heating element, the scale is destroyed after half an hour of boiling.

Powerful recipe

If the scale layer is significant, use an integrated approach. First, soda is used, washed, vinegar is added, removed again and transferred to citric acid. It is worth noting that this method is very effective. Accompanied by a violent reaction with the release of bubbles. All scale, even very old, turns into a loose gray sediment. It is advisable not to use the method for heating elements of an electric kettle.

Pickle Pickle

The remaining marinade from tomatoes or cucumbers contains vinegar or citric acid. The brine itself can be used to remove scale.

Modern way

An interesting experience is the cleaning of heating devices using modern liquids to quench thirst. The usual Coca-Cola, Sprite, Fanta are left open to let gas out. Sweet drinks are brought to a boil and descaled with a regular sponge.

Peeling potatoes and apples

To remove scale in a teapot, finely chopped peeling potatoes and apples can be boiled for several minutes. Leave the liquid for several hours to cool. The method can be used both for enameled utensils and electric kettles.

Wood ash

A good descaler is wood ash. They do not boil it, but simply rub it in salt coating. Then the scale is removed with a hard sponge.

Take a look inside your favorite pottery for boiling water for tea - and you will see white stains, deposits on the walls. Any electric kettle over time accumulates a layer of lime, if not regularly cleaned. This plaque contains solid mineral deposits when hard water is used that does not pass through a filter. The “crust” on the walls worsens the operation of heating devices and is harmful to health. After reading the material, you will learn how to remove salt inside the electric and other utensils for tea, using traditional folk remedies.

How to remove scale in a teapot

It is necessary to systematically clean it from mineral plaque, especially if this dish is used daily. The formation of deposits depends on the quality of the water used: if it is hard, then a layer of mineral deposits and lime will form on the walls much faster. How to wash the kettle from scale? There are various proven homemade tricks to help remove these mineral deposits. Soda, vinegar, Coca-Cola, citric acid, household chemical products work to resolve this problem.

How to clean a kettle with citric acid

How to descale in a teapot using citric acid? She cleaned metal tea leaves, plastic, glass products. In order to clean, you will need to boil half a liter of water, adding there after boiling 2 large tablespoons of citric acid. Wait a couple of hours until the water cools. Removing the “peel” on the walls, cleaning will occur on their own. Rarely do you need a little help with this solution to successfully deal with plaque. After this, boil clean water inside again, drain it. Your tea will taste better and your health will not be affected.

Descaler

How to clean the kettle from scale using specialized cleaning products from departments of household chemicals in stores and supermarkets? With their help, you can wash the product from stainless steel or any other material. To find out if a cleanser is right for you, read the label carefully before you buy. After purchasing the product, you only need to clearly follow the attached instructions. As a rule, you need to boil the water, add the powder, cool this solution, drain it and wash it well with clean water, boiling it a couple of times.

Vinegar

Try efficiently, inexpensively descaling the kettle with vinegar. It is aggressive, so the method is suitable for removing strong deposits of minerals. Used for tea glass, plastic, metal. To carry out the removal of plaque, you need to pour half a liter of water, boil, add a glass of 9% vinegar, leave for an hour, so that the process goes arbitrarily. Sometimes you need to walk along the walls with a sponge. An important condition is to thoroughly rinse the heating device from vinegar after the procedure, then boil it a couple of times with clean water.

Soda

Soda - a folk remedy for scale, which is easy to find in retail and it costs a penny, will help to clean an enameled kettle, aluminum utensils. To do this, you need 500 ml of water and a tablespoon of soda ash. If the mixture has not covered all the limescale, then increase the amount of water with soda. Bring the resulting solution to a boil and cook on low heat for half an hour. To enhance the effect, leave the water with soda to cool there for a couple of hours. If necessary, rub the excess with a sponge, rinse the dishes well and boil clean filtered water there.

How to remove scale in a Coca-Cola teapot

Try in practice another extraordinary way to combat mineral plaque, which will require a strong carbonated drink containing citric acid. This option is only suitable for electric heaters. How to clear a teapot of a scum, simply having added Coca-Cola? First of all, you need to let the gases out of the drink, leaving it alone with the lid ajar for an hour, pour it into the dishes and boil it. Leave to cool for a while, if necessary, rub with a sponge or a hard washcloth. Drain, rinse with clean water.

Video on how to get rid of scale in an electric kettle

An energetic and very cute video presenter will tell you about the most simple but effective measures for cleaning electric dishes in order to forget about plaque for a long time. How to descale in an electric kettle? If you have such a heating device for making tea, then this video will help. After watching the video, you will understand what tool is suitable in your case. Spend just a couple of minutes of your personal time, but you will understand what is better - soda, vinegar or lemon?