Setting up an Internet connection in Windows XP. How to connect wired internet to a laptop

The laptop is often used as a home computer, as a result of which the problem of access to inexpensive internet, which in addition has a high speed, is relevant for him. Today, these qualities are more consistent with an Ethernet connection, so we’ll tell you how to do it later. correct settings internet on laptop.

Ways to connect a laptop to the Internet

There are several ways to connect a laptop to a wired Internet:

via a USB modem, which is convenient, for example, in the country, but such a connection often does not provide sufficient speed and, as a rule, costs more;
using Wi-Fi if there is an access point, for example, when a Wi-Fi router can be turned on with a desktop computer with Internet;
this can be done through a wired Ethernet network that provides the highest speed, the connection to which will be discussed later.

Cable Internet for a laptop is the fastest, but also the most inconvenient, since in fact it can make mobile computer stationary. In the country, for example, it is better to turn on a simple USB modem. For use in the apartment, a Wi-Fi router is very useful.

Preparing to connect cable internet

To set up an Ethernet connection, first connect a network cable to your laptop. You can also connect a router to it, which, after setting up, will be able to distribute Wi-Fi to any other devices, providing a pretty decent speed.

The twisted pair wire is laid from the switch in the entrance to the place where you plan to make an exit point to the Network. special tool The cable has an RJ-45 plug that needs to be plugged into the appropriate socket on the panel on the side of your laptop.

Network connection will not be possible without the necessary drivers for the network card. To check if they are installed correctly, do the following:

Windows XP. Go to the control panel by clicking "Start", select the network connections section.
For Windows 7 and older versions. Go from the control window to the network and sharing settings section, select the change settings item for the adapter.

If the window that opens is empty, the driver is probably not installed.

General rules for connecting high-speed Internet

The data required for connection is indicated in a special contract. If you want to turn on the router, you will need to make other settings described in the device specification. If the network is not automatically detected, you will have to configure the TCP / IP protocol yourself.

In Windows 7 and 8, the connection is made in the following order:

In Windows 10, the connection is made as follows:

From the Start menu options section, go to Network and Internet.
Next, you will need to open the adapter settings settings.
Next, follow all the steps, starting from the 3rd, described for Windows systems 7 and 8.

Further, no action is required - the connection should work at full speed automatically. If you are connecting through a router, then the order may vary for different providers, so to set up the Internet, first find out full information on the corporate website of the provider providing this service.

Alternative Internet for giving

Note that in the country, where it is not possible to connect to the Internet via cable, the best choice will use the USB modem. With its connection, as a rule, there are no problems:

Insert a SIM card into the modem, then connect the device to a laptop;
The system will detect a new device and prompt you to install a program that allows you to use a modem on your device;
You may then have to enter the PIN code indicated on the card, after which the modem will automatically connect the laptop to the Internet.

In a word, you can connect to the Internet, which would have high speed even in the country, through a cable or router, while the connection setup procedure may sometimes differ slightly.

As you know, a computer without access to the World Wide Web is not of particular interest. Almost everyone needs the Internet, but not everyone knows how it is configured. The procedure for connecting a laptop to the Internet is practically no different from a similar operation on a stationary PC. There are only a few ways that will be discussed in detail.

Connecting a laptop to wired internet

Wired Internet has long become a familiar pleasure that many people have. Such a connection has both pros and cons. The access speed will be relatively high, but the laptop will not be carried far, as the wire limits the distance. All settings are usually performed by the wizard when connected. It will also be necessary to reconfigure everything after reinstalling the OS. This will require a couple of steps.

1. In the control panel, go to the "Network and Internet" tab.

2. Select the "Manage networks ..." item.

3. Press the button "Setting up a new connection ...".

4. Select "New connection", then click on the 2nd option.

5. Now you will need to enter the information provided by the provider (login, password). Here you can also set a name and attempt to connect. If everything is configured correctly, then the Internet should appear on the laptop.

Connecting a laptop to Wi-fi

The most convenient method. If you have a configured Wi-Fi router at home, you can connect your laptop to the Internet in just a couple of minutes.

Procedure:
1. Activate the module wireless communication on a laptop.
2. Open the "Network Connections" tab in the control panel.
3. Now you need to find a wireless connection and activate it through the menu ("Enable" item).
4. It remains to select a specific point from the list and try to connect to it.

If an access password was previously set, then you need to enter it. If the network is open, then nothing needs to be entered. However, you should definitely set a combination to secure the connection so that no one can connect to it.

Internet connection using a modem

After purchasing the modem, the first thing to do is to connect it to a free USB port. Usually all components are automatically installed. Once the software installation is complete, you can begin the setup process.

1. Go to the control panel, find the "Network Control Center ...".

2. You need to "Set up a new connection", then click on the item "Internet connection".

3. A list of three options will appear, you need to click "Dialed".

4. Now you need to enter the information that was provided by the service provider and complete the setup process.

Setting up a connection on a laptop is very simple, but you first need to decide on the connection method. Very convenient to use WiFi router, since you can connect not only a computer, but also a smartphone.

Today we will deal with the issue how to set up internet on a computer or laptop. As a rule, the Internet is configured by an employee of the provider at the moment when you conclude an agreement with him for the provision of services - after all, it is the correct access to the World Wide Web that is an indicator of the performance of this service. However, later when you reinstall Windows or purchase new computer Internet settings can fail, and here we will already face a dilemma - call technical support or do it yourself. In fact, this task is not at all difficult, so by reading this article to the end, you can save money more than once.

The most common type of connection is cable - a wire is pulled into your apartment with a special LAN connector at the end, which is inserted into the network card in the PC case. However, depending on the provider, there are several types of network connection. How to properly set up the Internet and how the connection to the World Wide Web occurs should be indicated in the papers of the contract that you were given when the employee initially set up the Internet. There are several of them - automatic IP, static IP, PPPoE, L2TP, filtered by MAC address. Let's consider them in order.

Internet setup automatically

I called this type automatic, because if the provider connects you using this type, then you are lucky - you don’t have to configure anything at all. With it, the computer receives an IP address on the network “by itself” - that is, we simply plug in an Ethernet cable and use the Internet. If it doesn’t work, then make sure that all configurations are reset - to do this, go to “Start> Control Panel> Network and Internet> Network and Sharing Center> Manage network connections> Change adapter settings”, right-click on “ Connection via local network" and go to "Properties> Internet Protocol version TCP / IP v.4". Here all values should be set to "Automatic", as in the picture

Internet connection on a computer with authorization

In this fairly common type, or rather types, because there are two of them, you will have to sweat a little and create a connection with the handles and enter your login and password to set up an Internet connection. If you click on the desktop icon every time to enter the Internet, a connection window opens in which you click on the button - this is your case.

PPPoE

PPPoE - connection to the provider's servers occurs only by login and password. If you suddenly reinstalled Windows, then in order to restore the ability to exit to no, do the following:

Go to "Start > Control Panel"
further in "Networks and the Internet"
and in the "Network and Sharing Center"
Here, somewhere on the page (in the left column for Windows 7 or in the main window in Windows 8 and 10) we see the menu item "Set up a connection or network" - click on it
Here we select "Connect to the Internet" and click "Next"
Select "High Speed (PPPoE)" and move on
We enter the login and password that the provider issued - they are usually indicated in the contract.
After that, we return to the "Network Sharing Center" and find the link "Change adapter settings" in the menu - we go through it.
We find "High-speed connection" - now it is in the "Disabled" state.
Double click on it, a window for authorization will open. Click the "Connect" button and enjoy! For convenience, this "High-speed connection" can be dragged with the mouse to the "Desktop", creating an icon with a quick link.

L2TP

L2TP is another type of Internet setup with authorization. To activate it, we do everything the same as in the previous method, up to step number 4 inclusive.

Connecting a laptop to the Internet with a static IP

The next type will not ask you to enter your login and password and click on the icons for the connection each time, but it does require manual entry of the IP address settings to connect to the provider's equipment. For the settings, we go through the chain “Start> Control Panel> Network and Internet> Network and Sharing Center> Manage network connections> Change adapter settings”, right-click on “Local Area Connection” and go to “Properties> Protocol Internet version TCP/IP v.4”.

And enter in the IP address and DNS server fields the values \u200b\u200bthat the provider provided.

Filtering by MAC address

And finally, for any of the above types, the provider can apply filtering by MAC address. This means that you can only connect to the Internet on the computer that is registered with the provider. Insert the cable into another one and the Internet will disappear. This byaka usually appears at the moment when you bought a new computer (or network card), brought it home, but the Internet does not plow. To be honest, I don’t understand at all why some of our “friends” do such garbage, but if this is the case, then you can activate access to the network only by calling the support service and saying that you bought a new PC.

That's all for today - I'm sure that you now know exactly how to connect the Internet to your computer and you can 100% do it yourself!

Hello, dear subscribers and guests of my blog! In today's issue, I will tell you about the features of setting up the Internet on a mobile phone. A mobile phone is the very first improvised computer tool with which a person can access the Internet.

In order to be able to be online in social networks, read news, use a navigator or check mail, you need to set up an Internet connection on your phone. Not everyone knows how to properly set up the Internet on their phone. Internet setup is divided into two types: automatic and manual. In this article, we will consider various connection options. mobile device to the Internet.

How to set up the Internet on the phone automatically?

One of the simplest and quick ways connecting the phone to the Internet is an order for the automatic configuration service from your mobile operator. The option to receive settings for accessing the Internet is free for all available Russian operators, and does not depend on the connected tariff plan. To receive automatic settings, you need to call from mobile phone to the call center, and then leave the appropriate application. After some time, the phone will receive automatic settings for the Internet, and the user will need to agree with their installation. To do this, open the message, and then select the "Set Settings" button. This method is one of the most popular to connect your phone to the internet.

There are cases when, after receiving automatic settings on the phone, the device cannot access the network. In this situation, you will need to perform the following manipulations:

- Make sure that the appropriate tariff for Internet access has been connected.

- make sure it's available Money on your mobile account.

- Make sure that the settings have been installed on the phone, for which you definitely need to click on the "Set settings" button.

- Reboot the device.

Most Android phone models may not support the automatic configuration option for mobile operators. A number of such operators include: MTS, Life and Beeline. If, nevertheless, your device does not connect to the network, then you will need to create the settings yourself. To do this, you need to order settings from your mobile operator, for which you visit the official website from a computer, fill in the required fields and send the settings to your phone. There is also a way to use short numbers, which you need to dial from a mobile phone that you want to connect to the Internet.

For Life operator: dial *123*6#. You can also send an SMS to number 123 with the text "INTERNET".

For Beeline operator: you need to dial the command *110*181#.

For the Megafon operator: you need to send an SMS with the number "1" to the number 5049.

For MTS operator: visit the official website or follow the link http://www.mts.ua/ru/online-services/settings#settings-auto. Thus, the 3G service will be connected.

It's important to know! Many users receive the settings automatically on their phone after the first SIM card connection.

Now let's pay attention to the manual settings for connecting to the Internet on the phone for one of the most popular operator in Russia - MTS.

How to set up internet on your phone manually?

Manual way to set up a connection for an MTS operator

The mobile company MTS provides communication services not only in Russia, but also in countries such as Belarus and Ukraine. If the device cannot connect to the Internet by obtaining automatic settings, then the following manipulations should be performed:

1. Go to the main menu on your Android device.

2. Go to the "Settings" menu, and then find the "Wireless networks" or "Mobile networks" section.

3. After that, you need to enable the function mobile internet. This can be done by moving the shutter to the right position. If you do not enable this function, you will not be able to connect to the network.

4. After that, a list of mobile networks will be offered. You need to find the appropriate MTS Internet profile or create it yourself. To do this, go to the "Access Points" section, and then select the appropriate profile from the proposed list or click on the option to create a new access point. The screenshot below shows access points for connecting to the Kyivstar mobile network, but these points will be presented in the same way when installing an MTS SIM card.

4. If you need to create an access point manually, then you should click on the above button, and then specify the Name - MTS, Login Username - mts, Password - mts, as well as the address of the connection point or APN: internet.mts.ru. All other parameters remain unchanged.

5. After that, you can start trying to access the Internet from your smartphone. Manual settings for operators such as Beeline and Megafon are almost identical, so there is no need to consider them separately. In order to clarify the address of the access point, you will need to contact the operator.

How to connect 3G connection?

To use high-speed 3G Internet, you will need to configure your device. At the same time, it is important to pay attention to 3G tariffs and connect the appropriate service, otherwise the use of the Internet will grow into a huge waste.

To set up your phone to connect to a 3G network for operators such as MTS and Life, you must order automatic settings. If for some reason you cannot do this, then you should create an access point manually. To do this, you need to do a number of the following manipulations:

- You must click on the network mode selection panel.

— Select the item GSM/WCDMA.

After that, close the settings window, and then restart the smartphone. After that, you can observe the appearance on the smartphone screen of a high-speed connection using 3G technology.

On some more modern smartphones, only the preferred networks need to be set: 2G, 3G or 4G.

Now the smartphone will automatically connect to the mobile Internet using 3G technology, unless of course there is such a type of coverage in your area.

Peculiarities manual setting Internet from operator Life

Let us also consider the features of manually setting up an access point to the Internet network of the mobile operator Life. This is Ukrainian mobile operator, which requires special attention to the settings for the Internet. To connect mobile Internet on Life, you must perform the following manipulations:

We go into the settings of the smartphone, after which we select the item “Mobile networks” or “Connections”. It all depends on the phone model and operating system version. In the window that opens, select the "Other networks" section.

In the window that opens, select "Mobile networks".

It is necessary to check the box next to the "Mobile data" item, and then enter the "Access points" section.

After that, the item for creating a new access point is selected.

In the window that opens, scroll down and select two items: Authentication Type or Authentication Type, and Access Point Type or APN Type.

In the first window, you must select the "PAP" mode.

In the window with the name "Access point type" you need to write the text with the name "default", and then click on confirmation.

After that, in the access point menu, you can find new point, which must be chosen.

After that, be sure to restart the phone, and after turning it on, make sure that the data transfer mode function is enabled in the settings. Then you can start using the mobile Internet.

Now, in order to access the Internet from your smartphone, you just need to turn on the corresponding “Mobile Internet” mode.

Summing up today's article "how to set up the Internet on your phone", it remains to add that to access the Internet you will also need to use a special browser that has the same names as for computers. When you open a browser, it should automatically load Homepage, which indicates the presence of mobile Internet. If there is no Internet, make sure that the phone "catches" the network.

There is no doubt that wireless Internet connection based on the use of ADSL modems is becoming more widespread today. But sometimes (and very often) it is necessary to set up a connection, bypassing such devices, using a direct connection of the computer to the provider via a cable for this. We will talk about how to connect the Internet via a cable on a computer. It is immediately worth considering some of the nuances, as well as the appearance possible problems, errors or failures of the connection being created, which will be discussed separately.

How to connect the Internet via a cable on a computer: what is needed for this?

The main and prerequisite, without which it will be simply impossible to carry out the plan, is the presence of an installed network adapter on a computer or laptop, for which all the necessary drivers must be installed (sometimes they may need to be updated to the latest versions).

Of course, any of the operating systems Windows installs such drivers on its own (either during its initial installation or when a new connected device is detected), but if you have the original disk with a set of such control software, it is better to install the native device drivers from this set.

Only in this case, the performance of the network card will be guaranteed entirely. We will consider issues related to updating drivers a little later, but, looking ahead a little, it should be said that it is not recommended to update using the system tools (it will be clear later why).

The second point is related to the cable used, which will be connected directly to the corresponding port of the network card. These cables have RJ-45 connectors. Finally, the user must sign an agreement with the provider company, which not only provides access to the Internet, but also gives a preliminary list of all the basic settings and addresses that will need to be registered on their own if the support service specialist does not do this.

Generally, according to by and large, if you understand how to connect the Internet on a computer via a cable from a router or modem, there is nothing particularly complicated here. If desired, any user who has even the slightest idea of the basics of working with Windows systems can perform such operations on their own. And the whole process will only take a few minutes. Why was it mentioned in this case that you can use the cable from the router? Yes, only because it is completely identical to the standard power cords that are commercially available in any specialized store.

How to access network advance settings across systems?

So, the equipment seems to have been decided. Now let's look at some basic settings and how to access them in different versions of Windows. If we talk about how to connect the Internet on a computer via a cable from a router in Windows XP, in this system you can access the network settings directly from the start menu, which has the corresponding item in a separate category. Later versions also have it, but it is not in the main list, but in the utilities section. In Windows 10, the easiest way is to use RMB on the start button, where the desired section will be shown in the list. In general, for all systems without exception, you can use the universal tool in the form of the "Control Panel", in which you need to go to the network and sharing management section, after which you will need to refer to the link to change the properties of the network adapter.

In this case, we are interested in the one for which the description indicates Ethernet or "Local Area Connection".

Difference between dynamic and static IP addresses

For now, let's leave the questions regarding how to connect the Internet via a cable on a computer aside, and look at one important nuance. Typically, providers offer to create a connection using two types of addresses: static and dynamic. The difference between them is not as great as it might seem at first glance. A static address is assigned to each individual computer and does not change during Internet access, that is, it is permanent. The dynamic address changes with each session (its new value is set).

Some mistakenly believe that this is akin to Nothing like that! VPN clients or proxy servers simply change external addresses so that the user's machine cannot be identified by geographic reference, and they have nothing to do with internal addresses. The address change is made with the choice of the unused one in this moment IP from the available addresses of the provider itself, which in no way affects the change in regional location. But which one to choose if the provider really offers to use either one or the other? It is considered that best quality connections are provided only when setting a static address, so choose this option, although dynamic addresses look a little simpler in setting up.

How to connect the Internet on a computer via a cable in Windows 7 and other systems: a standard method for setting up a connection

To establish an Internet connection, the first step is to call the properties item via RMB on the selected network adapter, and then go to the IPv4 protocol settings. Address fields must be filled in according to the list provided by the provider.

However, if for some reason you don’t have it, or you lost it, enter a combination in the IP field for the static address, say, 192.168.1.3, the subnet mask is almost always 255.255.255.0, and enter 192.168 in the gateway field. 1.1. For dynamic IPs, if provided, you can set the acquisition of all addresses in automatic mode.

A little lower, you should fill in the fields for the addresses of the primary and alternate DNS servers. They will have to be checked with the provider. If that turns out to be impossible, no big deal. Set it to receive automatically or use free combinations, such as those from Google, presented above, which work just as well. Next, just save the changes, just in case, reboot and check Internet access.

Note: especially when setting up, pay attention to the item to disable proxy for local addresses if the provider does not provide for the use of a server of this type, otherwise there may be problems with the connection.

Setting up a high speed connection

Now briefly about how to connect the Internet via a cable on a computer if you intend to set up a high-speed PPPoE connection. In this case, in the network management section, you first need to create a new connection, and then specify its type.

It will be either PPPoE for direct connection with the provider without involving network devices, or dial-up in case of using modems, for example, 3G / 4G standards. After that, you need to enter a username with a password and set a new name for the created connection. When all procedures are completed, simply click the connect button.

What should I pay attention to when using a router?

As for routers, we won’t dwell on them too much, since wireless connection is not considered in this material.

However, it should be noted that many modern models can be used as modems, therefore, in the device web interface, after logging in through any web browser, the router must first be switched to modem mode.

Issues of setting up the Internet when using the services of the Rostelecom operator

Finally, as an example, let's look at how to set up the Internet on a computer via the Rostelecom cable, step by step.

In principle, the IPv4 protocol is not particularly different from everything described, and may look like the one shown in the image above, but taking into account the input of the addresses that are present in the service contract and the activation of the IPv6 protocol. There shouldn't be any difficulties.

Now briefly about how to set up the Internet on a computer via the Rostelecom cable in Windows 7 or any other system if a router and a PPPoE connection are used. Log in to the router's web interface (192.168.1.1), use admin/admin as the login and password, specify PPPoE in the connection type, enter the login and password from the contract (not to be confused with authorization of access to the router settings), and most importantly, in Set the VPI/VCI settings to your region. After completing the operations, save the changes and reboot the modem / router.

Possible problems and their solution

As for possible errors connection, it is impossible to foresee everything. But as a first step, use the following methods:

check the correctness of entering the IP address and gateway;
replace the default values for DNS with combinations from Google;
disable the use of proxy;
update the network card drivers (it is best to use automated programs like Driver Booster);
temporarily disable the antivirus and firewall;
delete the existing connection and re-create it.

If all else fails, call the Windows troubleshooter and follow the tips to fix the situation. If that doesn't work, contact your ISP directly.