How to pick a lock: a few easy ways. Open the safe urgently

Closed old safes are often found in our time at enterprises that continue to work from the Soviet era. And many of these businesses are wondering how to continue to use these safes in the absence of keys.

In the overwhelming majority of cases, safes of bygone eras are unsightly metal boxes. Some of them are very difficult, others are not very. The locking system of such safes often consists of one or two locks with a lever type mechanism. You can see a sample of the lock from the safe in question in the photo below.

In order to open an old safe without a key, you need to have the following: a special tool, a skeleton key, an idea of \u200b\u200bthe mechanism structure (attached) and experience. It is quite obvious that if you are not a practicing locksmith, you simply do not have all this. And it is best to contact the phone specialists in your area, who will open the safe as professionally as possible.

In safes of this type, it is important that the opening is clean, without damage - because there are no such locks on sale. And none of the existing ones in nature will fit the seats of the old castle. Therefore, if you want to continue using this product for storing valuables, or even working documents, you will need not only opening or breaking, but also the subsequent restoration of keys to the existing lock. Which is not difficult for a safe specialist.

Demonstrating photos of the lock from this safe, we want to point out, among other things, the uniqueness of the safe-type locks. The keyhole of such a lock is always located only outside - there is no one to lock from the inside. There is a guide pin under the key, the key is tubular, and it is removed from the lock only in the "closed" position, that is, only when the door is closed. That saves the owner from the possibility of accidentally leaving the safe open in the office.

Hi friends, today we have something special. In the past I have described:, Now will show how to open the electronic safe in that hotel, very simple, no tools and only 5 seconds.

Why do you want to open the safe?

I wanted to open the safe because I forgot the code. You can open it for other reasons.
Anything you want to open, you should know that it is very easy to open without the correct password and without a reset key.

Why is it so easy to open hotel safes?

If you are staying at a hotel with big amount stars noticed that in a room, somewhere in a closet, you were safe.
This storage facility is designed to keep goods safe.
Unfortunately, these safes have a common reset (all vaults), which does not change when installed in a hotel room.
Perhaps these hotels do not know, know and ignore the situation. This code to reset the storage has not changed, and that many safes are vulnerable.

Can we trust hotel safes?

From my point of view, we cannot trust safes in hotels.
Why do they say that?
Let's give three simple reasons:

1. We reset this sinner code to open almost any safe.
2. Safes can be reset with a key that thieves can have.
3. Vault can be easily removed in the cabinet because you only need 2 screws.

How did I find out that the safe can be opened using the universal code?

My daughter play safe, put code after code before I forget. Instead, I call the trick, I started searching the net and found an article about this universal safe opening code.
The first time I say it is stupid, that there is no way that you could get it. I thought hotels were serious. How? The code that went first, and interestingly, on the site I read was abroad at english language... The conclusion is an international problem, not just happened in our country.

So be careful not to leave the hotel safely More chewing gum!

How to open a safe in a hotel - video tutorial

Modern safes are usually made of high quality steel and secured with locks varying degrees difficulties that only professionals can handle.

Different life situations sometimes forced more than one person to think about how, after all, to open the safe without a key, without damaging it. But do not forget that manufacturers are constantly improving their products and, therefore, opening the safe is simply not possible. First, you need to determine the model of the safe using the product passport, warranty card or instructions. This information will be useful to both you and the autopsy specialist in the event that you fail. If the documents for the product are lost, you can contact the store where the safe was purchased, perhaps there consultants and managers will help to identify the model of your safe.

How to open a safe without a key? There are several ways to open the safe without using a key. You can use handy tools such as a paper clip, wire, hairpin, grinder, etc. You can also try to drill the lock, or squeeze the safe door with a crowbar, which will naturally damage the safe cabinet itself. A more modern way is to use professional safe equipment, such as licensed lockpicks, sets for creating duplicate keys and much more. One of the surest methods of opening a safe lock is to contact people who are professionally engaged in this type of activity, which will reduce the loss of time with a high-quality result.

Types of locks

There are several types of safe locks:

• Electronic
• Mechanical
• Code
• Key

To open safe locks, you must use special tools in order to exclude mechanical damage.

In some cases, it is enough to enter a combination consisting of six zeros, but this method is not an absolute guarantee of opening the lock. The managers of the store where the product was purchased will be happy to share the method of opening a device with a combination lock. By registering your safe on the website, you can easily find out the code in personal account... If, for some reason, it is impossible to find out the code through the website, you will have to contact specialists to open the lock.

Why didn't the lock work?

There are a number of reasons why the safe lock might not work. Before taking any serious measures, there are a few things to check.

Several reasons for the failure of the safe lock:

Lock lock. It can happen if the code is entered incorrectly multiple times. In this case, you need to wait a few minutes to unlock and enter the code again. The unlocking time is different, depending on the type of safe.

Battery replacement required. Due to the low charge, there may not be enough power to open the lock. In this case, the batteries just need to be replaced. Manufacturers advise using original batteries, as they last much longer. The wedge of the bolt in the lock can also become an obstacle to opening the lock. Damage and disconnection of wires. To check it is necessary to disconnect the keyboard and remove the batteries.

How to open a safe with an electronic lock

Such locks are installed on high-class safes, since they are considered more complex devices with an increased degree of protection.

Not everyone can cope with this daunting task. Studying the configuration of safe cabinets and the availability of instructions for opening them will help.

The lock can be opened in two ways:
Use the special key supplied with the device. The key must be inserted into a special section, usually located under the emblem. Enter zero six-digit code. This method does not always work. If none of the options helped, you should contact a specialist.

How to open a rotary handle safe

These safes are equipped with open and closed limb locks.

Limb lock design open type easier than closed. Although visually they are very similar, their principle of operation is different.

Open-type limb lock works by following principle: Code discs are located on the same axis of rotation with the dial knob. The first disc is the leading disc, it is fixed on the axis. The rest (two or three discs) rotate only due to the leading first disc. Disks interact with each other sequentially.

The first with the second, the second with the third, the third with the fourth. The contact of the discs is made through the projections and is accompanied by a characteristic click. If the coding slots on all four discs are aligned correctly, nothing can interfere with opening the door. There are rules for opening such a lock:

1. When dialing the first digit, the knob must be scrolled counterclockwise
2. When dialing the second digit, the knob turns to the left
3. Third digit - right

If a mistake was made when entering the code, only a specialist who understands locks of this type can come to the rescue.

How to open a safe with a combination lock

There are two types of combination locks:

• Mechanical lock
• Electric lock

There are two types of mechanical locks, removable and non-removable. If the code cannot be changed, the safe is additionally equipped with a key lock. The pluggable mechanism can be with or without a key. When opening a mechanical lock, you will come to the rescue by entering the code programmed when the lock is installed on the safe.

The code is individual for each device. The electric lock device allows you not to make unnecessary holes, which makes the safe more reliable. Also, the electronic lock is protected from code selection. If the code is entered incorrectly, the lock is blocked for several minutes. If you repeat the wrong dialing, the blocking time increases.

And so on until the maximum possible, 15-16 minutes. Therefore, it is impossible to open the safe by selecting the code without knowing the combination.

How to open a safe from the times of the USSR

There are still people using safe-type devices of the last century. If you need to urgently get the contents of the safe, you will have to resort to emergency hacking.

But the best option to open the safe lock without a key, it remains to appeal to specialists who quickly and efficiently, without causing damage to the things stored in the safe, will cope with opening this lock.
Professional services for emergency opening.

If the listed methods did not help, you will have to contact a specialist. The opening of the safe, of course, should be entrusted to an organization with a good reputation. You will need to show the service employee a passport for the safe, or inform the brand, model and type of the lock. Professionals of such services are able to open the safe without damage and completely restore the lock's functionality.

How to make it better? The choice is yours. In any case, no matter what the safe lock is, the presence of a burglary resistance certificate means that breaking this safe is no easier than breaking through its thick metal walls.

Not everyone can do this, and sometimes they have to seek qualified help. Acquainted with detailed information we can easily find it on the Internet. For example, on this page you have the opportunity to get acquainted with the prices for opening safes http://zamok36.ru/nashiuslugi/vault.html or on another resource at your request.

Modern systems of safe structures have high level the security of valuable items, however, they can also malfunction. High-quality opening of safes using special tools will allow you to open the structure, as well as preserve its functional and safe properties for further operation.

Currently, there are a huge number of types of safes designed for different purposes, as well as a considerable number of safe locks that have different mechanical systems. The reasons why you cannot open safes that legally belong to you can be completely different.

The main reasons for a safe lock breakage:

1. The key is damaged;
2. The lock mechanism is out of order;
3. Lost key combination or code;
4. Damaged constituent elements safe.

In addition, other unforeseen situations are possible in which it may be necessary to open the safe locks. Since the safe structures are highly resistant to mechanical stress, their emergency opening is a rather complicated process. When acting on the mechanism of the safe, it is necessary to preserve the valuable contents, and also not to damage structural elementsaffecting its further performance.

Our experts provide qualified assistance aimed at opening locks of any type of safes: banking, office, furniture, fireproof, with any type of locks, whether key or combination locks different levels protection. During the work, the foremen use special equipment, which completely excludes the use of cutting, welding and gas toolsthat can damage the structure.

High-quality opening of safes in Moscow

Our company is well aware that access to a safe is an urgent issue. Therefore, our masters leave for an application anywhere in Moscow immediately after your call, and in the shortest period, which is equal to 20 minutes, they will be on the spot to complete necessary work... Urgent opening of safes in Moscow is carried out as quickly as possible, the exact time depends on the complexity of the lock and the protection class of the safe.

To increase the security of safe structures, not only a powerful impenetrable body is used, but also reliable coded systems. Most modern safes are equipped with special codes and actuators, which imposes requirements on the use of identification means when opening them.

Our services for opening safes cover the following models of safe structures: Valberg; Topaz; Juwel; and many other modern burglar-proof safes.

All work carried out by our specialists is carried out depending on the characteristics of each model and the specifics of the lock mechanism. Thanks to this, the risk of creating additional complications in the process of work is reduced, and damage to the case of the safe is completely excluded.

Safe opening services at Novy Zamok include:

• Emergency opening of safes;
• Repair of lock mechanisms;
• Diagnostic work and prevention of locks performance;
• Recoding or replacement of locks;
• Production of new locks.

The company also provides the opportunity to complete service customers in the residential, commercial and banking segments. Contacting the specialists of our company will help to open safe doors in the shortest possible time with the provision of quality guarantees.

Our company realizes the importance and confidentiality of such work, so we guarantee you complete safety for you and your property, as well as absolute security and reliability. We value our reputation, as well as the trust and peace of mind of our clients. The opening of safe doors is directly dependent on the lock mechanisms, including key, mechanical and electronic varieties.

Key mechanisms are used more often than others, and can be lever, pump or cylindrical. A special key is used to open key safes. Mechanical locks are also quite popular and protect the safe by establishing coded ciphers. Opening electronic safes is the most time-consuming process, since such mechanisms have the highest security and can be equipped with additional security equipment.

The specialists of our company will be able to open absolutely any safe lock at any time! All work is highly qualified and legal, as well as effective and efficient! Entrust the emergency opening of safes to real professionals and be calm about your valuable things!

How to open the AIKO safe?

PLS-1 lock

The PLS-1 lock is installed on Aiko safes of the T series.

To open an aiko safe with a PLS-1 lock

1. Press the "*" button, the green LED will light up to confirm that the lock is on.

2.enter the user code (the code can be 4,5,6 characters long)

3. press "ENTER" If you have entered the correct code, the lock will recognize your code and confirm the correctness of the code with a double beep and a green LED lit. The lock gives you 5 seconds to open the safe.

4. Turn the handle and open the safe.

The code selection protection on the PLS-1 lock is implemented as follows. The lock "falls asleep" for 5 minutes if more than three incorrect codes are entered. The blocking mode is confirmed by flashing red LED every 5 seconds. After unlocking, you must enter the correct code.

On locks with a backup key, you can open the safe through the key hole with the key supplied. To open the safe, remove the cover from plastic panel (between the keyboard and the handle) insert the key and turn it counterclockwise until it stops (about 25 degrees), turn the handle and open the safe. Do not store the key in the safe.

The aiko safe batteries are located outside the lock under the keyboard. If the power supply is not sufficient, pressing "*" will sound a beep five times and the LED will flash. Do not close the safe with dead batteries, replace them if possible. The PLS-1 lock uses 1.5V AAA batteries

If you are unable to open the safe, call our customer service zamok911. With us you can get advice on the operation of combination locks, re-coding, replacement and opening of safe locks. Service technicians will help you open the safe without breaking and damaging the safe.

(if you find an error in the article please write to us [email protected])