How to turn off the iPhone if the sensor does not work: detailed instructions. Non-standard ways to turn off the iPhone

It is unlikely that the owner of an iPhone or other iOS device has ever had problems with the software of his gadget when the device refuses to respond to touching the display, including pressing the device control buttons. What to do if the iPhone 4, 4S, 5, 5S, 6, 6S freezes and does not obey the simplest commands of its owner? In this article, we will talk about three methods for restarting an iPhone from any state.

First of all, we will assume that the iPhone works in standard mode, it has an adequate reaction to the touch, obediently executes the necessary commands by pressing the Home and Power buttons, while the owner of the gadget needs to reboot the device into normal mode.

Reboot iPhone in normal mode. Effective ways.

1. It is necessary to press and hold the power button in this position (it also performs the shutdown function)
2. Next, touch the button and sharply swipe to the right. Such an action in iPhone terminology is called a swipe. Thus, the iPhone display will start to go out.
3. Then you need to momentarily press the "Power" button. Then the Apple brand logo will appear on the screen, and the iPhone will start to boot in its normal state.

How to force restart iPhone

Both the iPhone and any other Apple device can be rebooted from absolutely any state. To do this, you need to simultaneously press two keys: "Home" and "Power" for 10 seconds - no more. Then the iPhone screen will stop responding in any way and turn off completely.

Next, release both of these buttons. If even after that the gadget does not turn on, and the manufacturer's logo does not appear on the screen, then you will need to press the power button. It is this method that makes it possible to force a reboot of the electronic device as soon as possible, although it is advisable not to use this method too often in order to avoid the undesirable consequences of a device failure.

Video tutorial "Hard Reset iPhone" - Forced Restart iPhone

How to restart iPhone without a button. Possibilities.

This method is applicable only when the iPhone works perfectly, it does not have software failures, but the start button is visually damaged and works inefficiently.

Currently, effective management of Apple gadgets is possible not only through manual intervention. In fact, the developers of this device have also thought out easier ways to turn it on. It just needs to be enabled Assistive Touch.

This feature is just designed to turn on the device without touching it directly. When this function is enabled, the device begins to understand remotely.

The same procedure takes place if you need to turn off the iPhone without touching. This is done by using the device menu.

Video tutorial "How to enable Assistive Touch in iOS"

A few notes as a conclusion.

• The above methods are perfectly applicable when turning on, turning off and freezing the iOS device in any state.
• The latter method is most efficient when Touchpad the gadget is in good condition, when it freezes Assistant Thatch does not function.

Electronics from Apple deservedly considered one of the most functional, productive and stable. However, any, even the most trouble-free technique periodically fails, and iPhones are no exception. The situation when the sensor stops responding to user commands can plunge an unprepared owner into a stupor. But there is a way out of such an unpleasant set of circumstances. Which one - find out by reading the information below.

Turn off (reboot) iPhone

To bring the gadget back to life, you must reboot. If, when the sensor is working, it is enough to hold down the power button for a few seconds and drag the slider across the display, when the sensor is not working, the procedure will be slightly different.

You do the following:
simultaneously press the Home key and the display lock button;
keep the indicated keys pressed for a few seconds until the device reboots.

In this case, it is important to correctly select the duration of the said buttons being pressed. After holding them for 3-4 seconds, you just turn off the iPhone, and a 5-7 second exposure will lead to a complete reboot, which is more convenient.

In some cases, the problem may be exacerbated by the lack of response to pressing the hardware buttons. Due to the fact that iPhones do not have a removable battery, you will have to wait until the gadget is completely discharged and turns off, after which it remains to connect the charger to the smartphone and try to turn it on. If the sensor still does not work, the problem is most likely at the physical level - you will have to contact the service center.

The mechanics of the iPhone interface is created from the principle of maximum functions for a minimum of buttons. This improves the ergonomic qualities of the devices.

But damage to even one button leads to the loss of a number of functions, including smartphone power management.

You can’t immediately turn off a device with a broken “Power” button, for this you need to configure applications or download additional ones. Some require following simple instructions, others require special skills.

How to turn off your iPhone if the shutdown button does not work

Device turns off alternative way through a pre-installed application or using third-party programs. Also, the design of the iPhone provides for the removal of the battery, but careless intervention here will lead to the breakdown of the smartphone.

These methods answer the question.

"Assistive Touch" is already installed in iOS. To activate, find this app in "Physical & Motor" settings. Once launched, the application will collapse into a translucent button. Tap on it and select the "Device" submenu, then hold down "Lock Screen" and slide your finger to the right until the power is turned off.

If the device does not freeze, use this method first. To turn on your smartphone again, connect the USB cable to a charger or computer. With the help of "Assistive Touch", the control of the smartphone with gestures is also configured.

In the settings of this application, select a gesture or create one yourself, and then bind the power off to it.

Third-party programs expand the functionality of the device. Application "NCSettings" it is a "jailbreak widget" with one-syllable access to the smartphone's settings. Among them is the emulation of the "Power" button, which turns off the power when pressed.

The interface looks like a separate control panel, the functions of which are represented by icons on the toolbar. It is invoked by sliding to the right at the top of the screen.

This is not the only program with this functionality, but "NCSettings" is free. You will not be able to download or buy these applications through the App Store, so use Cydia .

The widget is launched in the notification settings. The disadvantage of this method is that the jailbreak process for such programs is complicated and requires the skills of an advanced user.

Take out the battery - radical way turn off iPhone. This is a risky activity, the responsibility for which lies entirely with the user.

But in the event of a complete “bricking” of the device and inaccessibility service centers, take out the battery will be an effective solution.

1. Set to silent mode and turn off the device.
2. Loosen the housing screws at the bottom.
3. Press and slide the cover up. She will take off.
4. Remove the screw securing the battery at the bottom.
5. Carefully disconnect the battery cable from the board.
6. Pull on the plastic tab until the battery pops out.

The instructions may not be relevant for new iPhones, so it's best to check out the latest battery removal videos.

Wait for full discharge

The last and obvious way to disable the device. If the methods listed above seemed complicated to you, then you should discharge your iPhone, and then take it to a service center.

How to drain your device faster:

1. Turn off power saving mode
2. Adjust screen brightness to maximum.
3. Turn on WiFi and Bluetooth.
4. Launch applications and leave them active in the background.
5. Turn on the camera and record video.

The above methods are more appropriate to use for each individual case and taking into account skills.

And again we return to the topic of discussion of one of the most popular smartphones of the last few years. I think it's not a secret for anyone that in Russia iPhone smartphones are very successful. A lot of users who have purchased this device for the first time, often ask questions regarding the use of the phone. One of them sounds like this: how to turn your iPhone on and off? Believe it or not, this is incredibly easy to do.

Take the phone in hand. At the top of it, you will see the Power button. Click on it and hold for a few seconds until the screen shows the first signs of life. As soon as a bitten apple appears on it, you can release the button. Now it remains only to wait a little (literally a few seconds), as the device will be loaded and ready for work. Actually, that's all, nothing more is required of you.

If suddenly for some reason the device refuses to start, try this. As you know, the iPhone has two main buttons: Power, which is located at the top of the screen, and Home, which is located on the front side of the device. You need to hold both of these buttons for about 10-20 seconds for the smartphone to reboot. It is quite possible that if the gadget did not want to boot by pressing the Power button, it will boot after holding the specified buttons. If it doesn't work, try holding the buttons down longer (40-60 seconds).

In order to turn it off, you will need to hold down the Power button for a few seconds, after which a kind of window will appear on the screen. Swipe on the inscription "Turn off" (Slide to power off) and the device will be turned off within a few seconds.

At the same time, you should not turn off the gadget by simultaneously pressing the Home and Power buttons, as this does not turn off the smartphone, but only reboots it.

Everything described above applies to absolutely all iPhones that have been released so far: 3G, 3G, 3GS, 4, 4S, 5, 5S. As for the iPhone 6, nothing will change in this regard, except that the Power button will be on the side instead of the top of the device.

How to turn off the iPhone if the Power button or the screen does not work?

Let's look at two fairly common cases. If the Power button does not work, then turning off the device will not work so easily. You will need to install an application that allows you to turn off your smartphone without pressing the Power button. You can find it in iTunes. Turning on the iPhone, most likely, will have such an unusual method: connect it to the charger and it turns on.

If the screen does not work, that is, the sensor, then you will not be able to turn off the phone at all, unless you wait until the battery runs out. But turning it on won't be a problem.

Undoubtedly, American company Apple designs, manufactures and markets mobile phones excellent devices that justify their cost due to appropriate specifications and optimized operating system. It is only due to its devices that the company can be called distinguished from its competitors. However, these devices do not last forever. Yes, and any device can suddenly fail, and then work as if nothing had happened.

One of the most pressing questions asked by users on many forums dedicated to the works of the “bitten apple” was the question of how to turn off the iPhone if the button does not work.

Causes and consequences

Many users who ask if the button does not work do not even try to figure out what are the causes of the malfunction. And almost all owners of devices running the IOS operating system face such a problem. Sooner or later, but this, unfortunately, happens in the life of each of the devices. Power button (as well as the Home button) as a result of a crash software fails and stops responding to elementary commands dictated, if you can call it that, by the user.

Currently, by common efforts, three methods have been developed that will help you restart your device in case of a similar problem.

Method 1: when the device is stable

Let's assume that the device is stable. This is the simplest situation that can be. Everything reacts stably, touches are perceived, commands programmed for the “Power” button are executed. At the same time, there are no problems with the work of the “Home” key either. So, just hold down the first specified button and wait for the inscriptions “Turn off” or “Cancel”. Next, touch the left side of the strip called “Turn off” (it is colored red). Then, without taking your finger off the screen, we swipe across the screen. After the strip is retracted, the device itself will turn off, and its screen will turn off. For a few moments, hold down the power button again. You will be able to notice the corporate logo of the company, after which the loading of your device will continue in normal mode. Now consider the question of how to turn off the iPhone if the button does not work.

Method 2: The software crashed

How to turn off the iPhone if the button does not work? In this case, you will have to use the method of the so-called forced reboot. In this case, the device may not respond at all to touching the sensor, and not only to giving commands through the soft keys. To force restart your device, you will need to simultaneously hold down the power and exit to main screen. We keep them active for ten seconds. The device will turn off. After that, release the keys. If the logo did not appear immediately, then we act according to the second part of the previous method, that is, we press the key again. It should be noted that this method should be left as a last resort and in no case should you use it regularly.

Now you know how to turn off an iPhone without a button, although this method is only suitable for emergencies when the software crashes.

Method 3: special programs

Users who ask what to do if the iPhone button does not work are unlikely to be aware of the existence of special programs that will be very useful for the device as a whole. They make it possible to control devices without mechanical keys. The creators of the program, like no one else, understood that the resources of the buttons are large, but not unlimited. Actually, this led to the creation of software. It can be called the Assistive Touch function. Activating it will automatically give you full access to the touch controls of your iPhone. The function allows you to very, very finely, one might say, flexibly configure gesture control.

Thus, soon (after you get used to the new principles) you will abandon the mechanical elements in favor of sensory methods of manipulation.