Can Tva 100 receive digital TV. T2 how to set frequencies for all channels

So, you have decided to connect and set up digital terrestrial television for your Smart TV device. This, of course, can be done regardless of which TV manufacturer you have - Samsung, LG, Philips or some other. The main thing is that your gadget has a built-in receiver. It is important to note that such a receiver is installed in almost every modern Smart TV. But just in case, you can clarify this either in the instructions or in the store where you purchased the TV (or find information on the Internet).

There is nothing complicated in setting up digital terrestrial television if you follow the instructions clearly

What can give you the fact that the TV will be able to receive digital terrestrial television? Remember the old TVs, which most often had a screen with a jerky image, on which it was often simply impossible to watch your favorite show - these were analogue channels. So here it is modern world overcame this problem with the help of digital TV channels that have high quality picture and sound. Agree, in this case it will be much more pleasant to watch movies, TV shows or the same news. In general, some pluses and no minuses! Therefore, let's go directly to how to connect digital terrestrial television to a TV.

How to set up digital terrestrial television?

Before proceeding with the very setup of digital terrestrial television, let's deal with the preparation. You will need, first of all, the antenna itself, which you must first purchase or install (if you have your own). You can also calculate the antenna so that there are no problems with the length of the cable. And, of course, a TV with digital channels. Pay attention to this Special attention, since not all TVs can receive them.

If your answer to these two questions is yes, that is, you have both an antenna and a TV capable of receiving digital channels (it has a special built-in receiver), then you can move on. As for the receiver, carefully read the instructions for using Smart TV. Such information is indicated in it without fail.

Generic method

The method below is not quite universal, but rather general. That is, the principle of the sequence of actions will converge with others, but some menu items or button names will differ. Therefore, you can try your logical and analytical skills in practice and draw an analogy with your device. If you doubt yourself or do not want to complicate your life, then just find the instructions for your TV below (Samsung, LG and Philips are considered). Anyway, let's move on:

1. We connect the antenna to the TV using a special connector.
2. Now we pick up the TV remote control and click on the "Menu". This button is usually the largest, and it is located in an accessible and prominent place.
3. Next, you need to find the options or settings where we need automatic mode for them.
4. If necessary, you can specify the signal source (this is, of course, a cable), and then select digital channels. For each positive choice, click OK or Next.
5. Specify that you need a full channel search. Here, perhaps, there will be a field for filling in the data. In this case, we indicate the following information (note that if there is a network search for channels, then this data does not need to be indicated):
   • For the frequency, use a value of 314 MHz.
   • For transfer rate - 6875 KS/s
   • Well, modulation - 256
6. We press the long-awaited button "Start" or "Start". It remains to wait for the completion of the process, after which you can enjoy watching TV channels in higher quality, since your TV will be able to receive digital terrestrial television.

Samsung TVs

1. As in the previous instructions, first connect the antenna to your Samsung TV.
2. Using the special button on the remote control, enter the device settings.
3. In the list that appears, we will need a tab with a broadcast (or another name where the antenna icon is drawn), where there is an “Antenna” item, you need to indicate in it that the connection is made using a cable.
4. Then open the "Country" menu item. Here we will choose "Other".
5. Now you should see a window asking you to enter a special pin code. The default is 0000 if you haven't changed anything yourself.
6. If the device again requires you to specify the signal source, then without hesitation we select the cable.
7. Next, set the following search settings: fast mode, automatic network selection. Don't forget to fill in this data:
   • For transfer rate - 6875 KS/s.
   • Well, modulation is 256.
8. As they often write on the Internet, “turn on the hachiko mode” - and wait for the end of the process. If successful, you will be able to connect digital channels to the TV.

LG TVs

1. The turn of LG Smart TV has come. Just in case, let's repeat our first step - connecting the antenna to the TV.
2. Next, open the device settings using the button on the remote control.
3. We will need to find the country parameters, where we should select Finland or Germany.
4. The next step is auto-search for channels. It can also be found without any problems in the menu tab with a drawn antenna.
5. Next, we will need to specify what type of connection we have. As you know, this is a cable. Therefore, here the choice is obvious and you should not think for a long time.
6. We get into special settings, where we indicate the data already familiar to us (if you read the previous paragraphs). If not, then look:
   • For frequency, apply a value of 314 MHz.
   • Transfer rate - 6875 KS/s.
   • Modulation - 256.
7. We are waiting for the end of the search for digital channels. If everything went well, then you can please yourself by watching some program in digital quality.

It is worth mentioning immediately about the automatic updating of channels on LG TVs. Not all models have this feature. If there is, then you can not re-search - the TV will do everything for you. This setting is adjustable, so it can be turned off in the options if desired.

Philips TVs

As mentioned above, the method is practically no different from the previous ones, except for the names of menu items and some tabs. Let's get started:

1. Connect the antenna to the TV and go to the "Installation" tab of the configuration menu using the remote control.
2. You will see a list with options. We need the "Channel Settings" item.
3. Next, we enter the automatic installation, where the system will notify you about the update of the channel list. We are not afraid, but we click the "Start" button.
4. Now you have to click on reinstall channels, then select Germany or Finland as the country.
5. After the manipulations, you will need to set the connection type - "Cable".
6. It's time to set some parameters using the "Settings" item. Here the speed should be 314.
7. And now, after numerous manipulations with the settings and searching for the necessary menu items, we have reached the finish line: click on "Start" and wait for the process to complete. Upon its completion, your fruitful work is declared completed.

How to decode channels?

First of all, please note that if you set up digital channels according to the above method, then you should not have scrambled channels in principle. This problem occurs when you have cable TV (for example, NTV Plus or Tricolor TV). There you set a special price for watching channels for a certain period of time. When the subscription time expires, you are blocked from accessing these digital channels. Then you should pay for the services and reconfigure the receiver. If you do not know how to do this, then you can contact the specialists of your specific receiver by phone number or through their website. You can also try to find instructions for everything on the same official website, which describes in detail the entire procedure for resuming viewing.

Summarizing

Digital terrestrial television has a higher display quality than analog channels. You can connect and configure this function very easily on any TV - you do not need to have any special knowledge for this. Let's generalize our instructions into a common one for most TVs:

1. We connect the antenna.
2. In the settings menu we find auto-search for channels.
3. Then we set the connection type "Cable" and, if necessary, set the parameters in the data area (baud rate, frequency and modulation).
4. Also, as needed, you need to select a country - most often it is Germany or Finland.
5. We start searching for channels using the start button in the dialog box.
6. We are waiting for the completion of the search and proceed to the long-awaited viewing!

So, if you are interested in the topic of digital terrestrial television, then most likely you want to know what channels you will receive if you connect it to yourself. I'm right? Then read on) maybe you don’t need it?

What are digital TV multiplexes

Today in Russia DVB T2 format broadcast 20 channels. They are divided into two packages, these are the so-called multiplexes. Both packages are free to view, there is no subscription fee. It is enough just to have a TV that receives a DVB T2 signal and.

That's what the "figure" broadcasts in Russia

First ten channels (First multiplex)

The first package, or the first multiplex, is general information, news and development channels (boring things). Here is a list of digital television channels of the first multiplex:

• First channel
• Russia 1
• Russia 2 Match TV - a channel with sports broadcasts
• Channel Five
• Russia "Culture"
• Russia 24
• Carousel - children's channel, cartoons, programs for children
• OTR - Public Television of Russia

The first multiplex operates wherever there is digital television.

I knowingly wrote the time of publication of the article. The fact is that sometimes the composition of the channels changes on the basis of a competition that is held by the state every year. So things may change in 2016.

Just recently, a replacement took place in the second multiplex and "Sport +" was replaced with the entertainment channel "Friday" ... Also, the channel "Russia - 2" in the first multiplex was replaced by Match TV.

Third package of channels (Third multiplex)

And yet, they promise a third multiplex, but it will already be with a subscription fee. So I don't think it will be wildly popular. Since, as soon as the on-air "figure" becomes paid, it will be easier to stretch a cable with 40+ channels for 120 rubles. per month.

And here is what they write on the project about this:

It is too early to talk about the exact date of the start of broadcasting of the third (regional) multiplex. To begin with, principles for the formation of a regional multiplex at the government level should be determined, after which competitions will be organized to determine the channels participating in the third multiplex. Only after the composition of the third digital package becomes known, RTRS will be able to start broadcasting it. It should be noted that this fall, the Government Commission for the Development of Television and Radio Broadcasting postponed consideration of the issue of the principles for the formation of the third multiplex until 2018.

In this article, we will tell you how to properly connect digital television to a TV. Here we will talk about only connecting terrestrial and cable TV (setting up satellite broadcasting is beyond the scope of this material).

Attention! All cable connections described below should be made with the power turned off to prevent damage to the devices.

How to connect digital terrestrial television to a TV

Many modern Smart TVs have a built-in receiver for decoding a digital signal. For example, a line in the characteristics of a DVB-T / C / S TV indicates that this TV model supports the reception of terrestrial, cable and satellite digital television without an additional set-top box. At the same time, some standards are already outdated, so a TV with a built-in DVB-T module will not be able to receive digital channels of the current DVB-T2 standard.

What you need to connect digital television

• Antenna of the decimeter wave range (UHF) or a universal all-wave antenna designed for different ranges.
• Digital tuner (receiver) DVB-T2 or TV with a built-in module of the same standard.
• Connecting cables.

Separately, it should be said about the broadband Polish antenna, the so-called "lattice" or "Polish". If you want to use it to receive digital television, you will need a little refinement, namely the replacement of a standard amplifier with a symmetrizer. This will cut off the unnecessary range and tune it exclusively to decimeter waves. Or purchase a "Polish" with an already installed symmetrizer.

Since not all TVs have a built-in tuner, we will consider the connection diagram using a digital set-top box. Such an instruction will be more universal and suitable in most cases.

1. Connect the high-frequency antenna cable to the digital set-top box's antenna input labeled IN or INPUT.

2. To connect your digital set-top box to your TV, we recommend using HDMI. This interface is designed specifically for digital signal and provides the most high quality Images.

To connect a digital TV set-top box to the old TV you can use the AV connectors for an RCA cable ("tulip") or a coaxial connector. There are no other options for older TVs.

3. How to set up digital TV channels on your TV

Connecting a TV with a built-in digital tuner occurs according to a simplified scheme:

1. Connect the RF antenna cable directly to the TV's antenna input.
2. Activate the digital tuner in the TV menu.
3. Produce automatic tuning digital channels.

How to connect digital cable TV

To connect this type of TV, you need a digital cable or universal (hybrid) receiver. Unlike regular terrestrial, it is equipped with a special PCMCIA slot for a CAM module with an access card that allows you to unlock a paid channel package purchased from a cable TV operator.

Many modern Smart TVs with a built-in digital receiver already have a PCMCIA slot, so no additional equipment in this case is not required.

You can also use a special card reader to read CAM modules, but due to the large selection of hybrid digital receivers, these devices are used less and less.

Otherwise, to connect a digital TV set-top box to a TV and set up digital TV channels, follow the instructions described above, since almost all receiver connectors are identical. Unless in this case, instead of an antenna RF cable, a provider's cable is connected to the input of a digital set-top box or TV.

How to connect two or more TVs to a digital set-top box

Ideally, one digital receiver means connecting one TV to it, so the best, although not the cheapest option, would be to purchase a separate receiver for each TV. In this case, the RF antenna cable is connected to a splitter (splitter) with two or more outputs, and then the signal goes separately to each receiver. The diagram of such a connection is shown in the figure:

You can also simply connect two TVs to one digital set-top box (receiver) using free connectors. For example, HDMI is for one, and tulips are for another. It should be remembered that in this case, the same decoded signal will be sent to both TVs. Therefore, the image on the screens will be synchronous. In addition, you will need long cables that allow you to spread TVs in different rooms.

Another way is to use an RF modulator, which, through a divider, will supply a separate decoded signal to each TV. But often the cost of such a device is several times higher than the price of a conventional digital terrestrial tuner.

Frequent connection problems

Users of our Internet provider have the opportunity to connect digital television without a set-top box and thus save on the purchase or rental of a receiver. At the same time, the quality of the signal received with a direct connection is identical to that received by users connected via the TV-2 module.

To get access to the whole variety of TV channels available to viewers, you will need:

• a TV with built-in Smart TV or Internet TV functions;
• broadband high-speed Internet access and a modern router that distributes Wi-Fi without slowing down;
• if a small diagonal does not bother you, your tablet PC or smartphone running operating systems iOS or Android;
• register after downloading the Wifire TV application and select the channel package that interests you the most.

To start using digital TV without a set-top box, you need to download the Wifire TV app for Smart TV, iOS or Android. Registration of a new user is as simple as possible, taking into account the requirements for ensuring authorized access and secure storage of your personal information. Access to watching channels is provided in packages supplied at different prices, with the possibility of expanding the basic channels with additional ones. This allows each user to set up the required number of transmissions with their preferred content without overspending.

Advantages of connecting digital television without a set-top box

The main advantage of the connection method we offer is that there is no need for a set-top box. Thus, you save about 2 thousand rubles one-time or reduce the monthly fee by the cost of renting the device.

Other important advantages of connecting TV without a set-top box:

• simple intuitive interface with the ability to record broadcasts, stop and rewind them;
• flexible configuration of available channels with the ability to expand the standard offer with theme packs;
• convenient viewing control with a single remote control.

The application is available to most modern TVs LG and Samsung. Through the use wireless technology connecting the Internet reduces the clutter of your apartment with wires.

FAQ

What Internet speed does digital TV require without a set-top box?
To correctly answer this question, it is necessary to take into account a number of additional factors:

• the number of users and devices connected to one access point;
• the criticality of the drop in access speed for any connected device;
• features of the router you are using.

The more devices and the more critical the speed drop for each, the more high-speed Internet will be needed. For a small family using Wifire TV on TV, the minimum recommended rate is Wifire 100 with the appropriate speed.

What diagonal of the display of the device is necessary for comfortable viewing?
It depends on your personal preferences. In our opinion, in order to enjoy watching TV channels with Wifire TV, you need a device with a diagonal of 7-7.5 inches or more. However, no one prevents you from running it from smartphones with a smaller diagonal and enjoying high-quality content while browsing your favorite channels.

Is there a situation when connecting through a set-top box is preferable?
If your TV does not support Smart TV technology, connecting via a set-top box is the only option that exists on this moment. We recommend that you carefully study the capabilities of TVs before purchasing them, first of all, paying attention to the availability of technologies that are recognized as the most promising.

Tariffs and services of Net By Net Holding LLC may be changed by the operator. Full up-to-date information about tariffs and services - in the "tariffs" section or by phone indicated on the site.