Do-it-yourself children's outdoor complex for a summer residence. How to make a children's playground at the dacha with your own hands

Do-it-yourself play equipment for a kindergarten summer playground

Summer is the most favorite time of children. You can spend time in the fresh air all day long, which will strengthen your child’s body. Teachers are thinking about how to organize work with children during the summer in order to satisfy the growing body’s need for creative, cognitive and motor activity.
We prepared thoroughly for the summer. We thought through areas for children's play activities and made a lot of play equipment with our own hands. Parents were involved in this process, for which we are incredibly grateful.

Done health path for the prevention of flat feet.
We used small-diameter tree branches, bottoms of plastic bottles, slats from the back of a crib, old abacus, and capsules from Kinder surprises. Walking barefoot in the summer will help strengthen the child's body.

Created center for the development of fine motor skills in the form of play equipment.

We used the back of a crib, plastic balls from a dry pool, pyramid rings and cubes. We secured the rings in such a way that they could move and rotate freely.

They took an old table and fixed half the bill on it. The bones were painted in bright colors. I made lacing game using small plywood, juice box rings and self-adhesive paper. The plywood was screwed to the table. The game required bright colored laces. You can lace in different directions: from top to bottom and vice versa, similar to lacing on shoes.
For games with traffic jams They made a cube out of plywood, inserted the necks of plastic bottles into the upper surface and secured it. We made overhead picture mats from universal napkins. You can select corks by color for each picture composition. A hook was attached to the table leg, on which a bucket with a set of caps and a set of picture rugs were hung. The chairs were taken from a warehouse and painted in bright colors. The equipment was secured on the table in such a way that a group of children could play at the same time, and the table could be approached from different sides.

At the center for the development of fine motor skills of the hands, they secured Sun. It is made of plywood. The eyes are switches. They can be closed and opened. The mouth is lacing. Also used were rings from juice boxes.
A rack with ribbons is attached under the sun. At the ends of the ribbons there are caps from felt-tip pens. Ribbons used for twisting (rolling).

Our center has locomotive.
There are various devices attached to it that can be closed, pressed, snapped, turned on, twisted, etc.

Next to the cow mini sandbox we made last year there is now a ram placed next to it.

Ram is a table for drawing with semolina.
The ram is made of plywood, wooden blocks are used for the legs. Plexiglas is fixed on top. Sand can also be used for drawing.

This stand for creative works.

The headboard from a children's bed, wooden blocks, wire, stationery nails and clamps were used. On the reverse side there is plywood attached for chalk drawing. A bucket for water is attached to the leg. There is also a cloth that children can use to erase drawings.

To teach traffic rules, markings were made on the asphalt and a traffic light was made from plywood and self-adhesive film.

This table for games according to traffic rules.

The road is made in the form of a cape, it is sewn from fabric. An elastic band is used, which is inserted along the edges of the road. It allows you to freely put the road on the table. The houses and traffic lights are made from waste material - cardboard boxes. Cars and attributes for the game are stored in a plastic container.
This FISO – corner.

It is installed on the veranda. And it is made in the form of a machine from plastic boxes of vegetables and fruits. The boxes are painted and mounted on wooden frames, which are also painted. The car stores attributes and equipment for PHYS - outdoor activities.
This lion - physical training equipment made of plywood for throwing at a target.

You need to throw it in your mouth. For this purpose, a round hole was cut out, a bag in the form of a bag of red fabric was sewn, which was secured using a furniture stapler. For throwing you can use small rubber balls, plastic balls, cones. They are easy to take out and put back in a bowl or basket.

On the veranda we decided to do girls room.
For this purpose, the walls were painted accordingly. One wall is the kitchen, the other wall is the bedroom.

Carpets were laid. They put up an old cot. A cradle was hung from a hook in the ceiling. They made it from an old stroller, which they covered with bright fabric, tulle and rope.

A children's playground, made with your own hands from improvised materials together with your child, will be a useful and interesting acquisition, and the photos below for making it in the country will help you with this.

A playground for children to spend time in the country plays a role both in the development of children and is used for the older generation - older teenagers, youth and parents. The advantage of a well-equipped playground for children is that the child is under constant supervision, although he does his own things.

A children's playground at the dacha can be made from improvised materials

By creating a playground for your child, you provide him with a personal place where he is the master. Although his presence on it happens before your eyes.

The sandbox at the dacha can be decorated interestingly with stumps

By arranging a place for children, you let them feel your care and love, as well as show off your own skills. You can teach them to your child.

Having your child on the playground will allow you to take care of personal matters. And the child, using the devices independently, will develop imagination and intuition. Invite friends over and, without disturbing you, play and communicate with them, and feel the status of the owner..

The functional purpose of the site for children's development is the employment and development of the child. There are a lot of variations of elements for this.

Probably all of them who are now adults built huts, climbing frames, and swings in childhood, although not everyone had enough experience and skills for this.

A car on the playground made from old tires, attributes of an old car, will really appeal to the boys

Today it is possible to fully realize children's fantasies... Although it is worth consulting with the child about his desires.

Don’t think about technical perfection, make your childhood dreams and desires come true as best you can, using available materials. This will allow the playground to be attractive, but also to engage in interesting activities together with the child.

Important! The choice of devices for creating a play area primarily depends on the age of the child.

For young children, the sandbox is primarily important. This is the least time- and material-consuming place for children to play.

The sandbox is very easy to install. To do this, you just need a few boards to enclose the area chosen for the sandbox and the sand itself.

A simple sandbox can be made from boards

It is worth taking care of sun protection by installing either a traditional mushroom or a canopy.

To prevent the child from overheating, it is better to build a sandbox with a canopy

Which will require a pole at least 1.5 meters high and 4 wooden triangles, together they will cover almost the entire space of the sandbox.

You can also use options for canopies made of fabric.

The sandbox canopy can be made of fabric

For young children, an ordinary car tire can be an option for fencing a sandbox.

A simple sandbox for kids can be made from a tire

Tires are also well used for making swings.

Tires make great swings

For this version of the swing you will need the following materials:

tire with a radius of 14 or more;
boards: 4 x 50 centimeters and 1 x 34.2 centimeters;
iron tube 34.2 centimeters long.
Cementing mixture placed in the tire.
A board at least 1.5 meters long.

The mechanism for adapting the pipe and the wooden product is also shown in the figure.

Car tires are a universal material for the manufacture of many devices for children's activities.

An example of a swing, as well as an option for using car tires to make various jumping ropes and climbing frames, is shown in the photo.

Jumping bars are often made from tires by half-burying the tires in the sand.

For the physical development of a child, simulators for the vestibular apparatus are necessary; they can be made from either wheels or logs. It all depends on the availability of the necessary materials.

Another interesting option for the physical development of a child is the installation of a climbing wall.

DIY A-shaped climbing wall for children

For its manufacture, the ideal option is an A-shaped wall, which can be moved if necessary.

Two frames are made from beams connected at the top with bolts. It is advisable to cover it with carpet or similar suitable material.

Grips will be required for support. These can be cobblestones collected by children, firmly glued to the wall, or they can also be purchased in specialized stores. It is advisable to attach them with bolts for greater safety.

In addition to tires, any broken piece of furniture can be used to make swings - chairs, benches and even a skateboard.

The swing seat can be made from an old chair

We make a rocking skate by removing the wheels and making holes in the surface for the rope.

Thread the rope through the surface of the skateboard.

In order for a child to confidently stay on a swing, handles are needed. We make them from two sticks.

The knots should not be tightened too tightly so that they can be adjusted if necessary. After attaching the swing to a tree branch or pole, check its strength, safety and functionality yourself.

Also, a fun element for children is a slide, which can be used not only in the warm season, but also in winter.

Do-it-yourself slide in the country

To make it, you will need boards treated from roughness so that there is no possibility of planting a splinter.

A swimming pool is a fairly necessary element in summer. The easiest way to purchase it is in a store and install it in the shade. Although doing the work of installing a pool independently, together with the children, will be remembered for a long time and will last for a long time.

This will require additional knowledge and skills, but believe me, it's worth it.

Digging a pit and a drainage hole, attaching hoses to fill water - all these activities will teach your child engineering skills, and he or she may show interest in them in the future.

In addition to exercise equipment for physical development, places for quiet games are needed. These are gazebos or all kinds of houses, including, if necessary, with labyrinths.

Children's houses can be purchased in stores or built independently. An artfully landscaped structure can also be an option for a gazebo.

In addition to various equipment for children, you can come up with various calmer and stationary games. An example is tic-tac-toe. For which a regular stump is used. Or just various hemp for gatherings

An excellent option is to combine many elements into one, which will significantly save installation space.

Another unique, although less durable, are cardboard boxes, from which you can make various structures for children of any gender, both with rooms and towers.

It's very easy to make a house out of a box

Choosing a place to install a playground on a personal plot

One example of the distribution of devices on a playground for children is a clearly separated area for full visibility.

Important! It is necessary to separate children's areas and planting areas so as not to worry about children trampling them.

The playground equipment itself may vary in the number of installed items. Although such scarcity is not the best option.

An interesting example is the installation of more devices:

The sandbox is normal;
Jung's sandbox, this is like a version of sand therapy
Swing;
Bench;
Parasol;
Tent;
Table with chair;
Inflatable pool;
Place (bucket) for small toys.

A table and chair made from hemp would be a good option for a playground.

In such an area, a child, alone or together with parents, grandmothers or a group of children, can spend the whole day in the fresh air. Here he can play noisy and quiet games, take water treatments or engage in similar activities that are beneficial to him.

Additional decorations for the playground

A playground for children is made from various items and complemented with interesting decorations for a more varied pastime. These can be any cartoon or real characters: bees, butterflies, mushrooms, as well as cars, ships.

From ordinary plastic bottles, of which there are many in everyday use, you can create many interesting things, such as trees, animals and many fun crafts.

Also, your imagination will allow you to adapt any pieces of wood or logs to create jewelry. Which will be unique in their appearance, because you realize your fantasies, even using the examples of other people.

Let's present a video showing a lot of options for decorating a playground.

When arranging a playground for children, it is worth considering the convenience of the location of all the elements prepared for installation in the chosen place. It is also necessary to take into account the age of the child and the possibility of replacing elements as he grows up. A sandbox required by a child aged 2–5 years is no longer relevant for a twelve-year-old boy or girl. Although swings are in demand by children of any age, and even young people, for evening gatherings.

There are a lot of variations of playground elements that you can make with your own hands. Some of the necessary elements will have to be purchased in the store, but most often everything is at hand.

All installed structures must be discussed with the child and it is advisable to make them together with him, taking into account, accordingly, the child’s physical fitness, character and temperament, and the desired direction of their development.

Much, in this case, depends on the income of the family and its composition. Male and female hands and the skills of an adult will be required to create an interesting and functional playground for a child. This will be a decisive factor influencing the choice of the number and technological features of elements.

The most important thing in arranging a playground is the desire of children and parents to jointly create a functional, interesting space for children to spend time. When installed with stationary options made of durable materials, it will serve well for perhaps more than one generation of children.

How to decorate a children's playground - interesting ideas

Do-it-yourself children's playground using improvised materials at the dacha 46 photos:

All families with children strive to create a children's corner at their summer cottage. What could be better for a child than outdoor games in the company of friends? Today you can make a children’s playground for your dacha on your own, assemble it from purchased elements, or combine ready-made elements and available materials. Today there is no shortage of ready-made children's playgrounds - you can buy a colorful inflatable playground, a trampoline, a swimming pool, make it yourself or buy a wooden children's playground. Older kids really like sports towns with rings, wall bars, ropes and other equipment. You can also build a sports ground yourself or buy it from manufacturers.

You can purchase a children's playground ready-made or make it yourself, using a ready-made model as a basis. Additional parts - seats for swings, slides, can be purchased today in specialized stores

Step-by-step description of the technological process

Let's look at an example of creating a children's playground made of wood with a plastic slide. There can be many options for its organization; each summer resident will certainly create it in accordance with his abilities and design capabilities according to the general scheme.

The material on safe zoning of a summer cottage for families with small children will also be useful:

So, you will need: a hacksaw, a large drill, regular and thick wood drills, wrenches for tightening bolts, an angle cutting machine, boards 10/10, 5/10, 5/15, and other sizes as needed, wood screws (5 cm), 8/20 cm galvanized square head screws, washers, stain, paint, embankment gravel (or sand), nuts, lock washers, 2.5/2 cm galvanized washers, galvanized carriage bolts (length 25 cm, diameter 2.5/5 cm), as well as equipment for the town - slides, swings, sports equipment at your discretion.

General description of the design

The town includes three levels. The dimensions of the upper “floor” are 1.5/3 m, the upper level should be located two meters from the ground. You can put a roof on top, or you can leave the area open. A slide is fixed at the top level if you decide to install it.

The dimensions of the second “floor” are 1.2/1.2, this is a small area, the first level is the sum of the areas of the first and second. The levels are connected to each other by stairs. The swing is held on a beam attached to the main structure. You can make several swings, placing them at the same distance from each other.

View of the town - three levels, a fence made of vertical beams performs a protective function, a plank floor, a slide is mounted on the top level

Vertical bars on sections play an important role - they provide safety and are decorative. The structure is built on the ground, then attached to the beams using bolts. It’s difficult to build a town alone - the sections weigh a lot, it’s better to do it with two or three people. If you make a drill template for 5/15 and 5/10 cm boards, drilling the holes will be much easier and they will be placed evenly on the beams.

Construction of the floor and railings of the site

The plank floor is made after attaching the sections to the main structure. If you don’t want grass to grow through the boards at the bottom, you can cover the soil with boards and sprinkle it with crushed stone. Another option is to nail a weed control material to the structure.

The railings on the site must be strong at all levels. Railing posts are pre-fabricated and then screwed between the support beams and railings. All children like slides, so to make the playground more attractive for kids, you need to install one or two plastic slides. This version of the site uses a winding slide, but you can also use a straight one. First, all the components of the slide are fastened together, and then it rises to the top. Ideally, for ease of installation, the height of the slide and the top “floor” should be the same.

Installation of swings and plastic slide

The swing is installed last. The main beam attached to the play structure is supported at the other end by a triangular support.

Side view of the town - you can attach a swing (one or more) to the cross beam, as well as hang sports equipment - a rope ladder, rope, rings

A triangular support that supports the structure of the town on the other side. It is reinforced with inclined beams. For strength, it is recommended to concrete all supports

If you use wood that has been treated with pressure impregnation to create such a play complex, it may become stained over time. In this case, it can be painted in any color. Using similar methods, you can build a children's playground of any size with your own hands, choosing different slides and swings. Next to the swing you can hang a rope, rings, make horizontal bars and a Swedish wall - this is both a children's playground and a sports town. The main thing is to build the structure after a carefully drawn up plan, and the use of drilling templates will help achieve accuracy of execution.

The slides and swing seats are made of durable plastic. It is convenient to purchase these elements of the town ready-made, just like rope fasteners.

What else can you do on your own?

Today you can choose an inflatable town for children to suit every taste - for the little ones, for older children, with a pool, trampoline, etc. Such a town is convenient because it can be placed anywhere, it is light, mobile, painted very brightly and positively, and will bring kids no less joy than any other. It is recommended to place the inflatable town and pool bowl on a paved area. It happens that lawn grass breaks through the thin bottom of the inflatable structure.

Inflatable towns are a simple solution to the problem of a children's play area. a huge selection allows you to choose a place to play for very young and older children, choose the type of town - a trampoline, a swimming pool, a fortress with slides, etc.

Anyway, here are some safety rules:

Make sure that there are no cracks, sharp corners, protruding nails or bolts on the equipment. All play and sports equipment must have smooth corners to avoid injury. Check all fastenings periodically.
There must be a safety zone around swings and carousels - at least two meters.

In the children's playground you can place carousels, swings, a sandbox, a climbing wall, monkey bars, horizontal bars, a rope, rings, cars, ships, and spider nets.

Such a simple playground is not difficult to build from logs. Rings, a rope ladder, and a swing were used as projectiles. You can also use a rope, a swing with a tire seat, a climbing net, make a climbing wall - and there will be enough equipment on the site

If the above option is difficult for you, you can create a simple town using logs and tires. Carefully fix the tires, paint - and the place for children's games is ready

That's all for today. If you have any questions or suggestions, write in the comments.

So that children at the dacha or near the house do not explore the beds or other places where they should not be, they need a corner that is interesting to them. As a rule, parents come to the idea of the need to create a playground or a sports corner - it depends on the age and desires of the children. A self-made playground is good because during its construction you can provide for the possibility of its gradual transformation. After all, what suits 2-3 year olds no longer appeals to 5-6 year olds, and even more so to older children. And besides, a do-it-yourself playground is often built not so much for reasons of economy, but rather out of a desire to please the child: who knows better than the parents what your child likes... Some people need a pirate ship, and others need their own, real house with a porch, a door and all the necessary attributes.

DIY Danish playground - a place for your favorite offspring to play in the country or in the yard

Choosing a location

It will be a difficult task to solve. Firstly, it is desirable that the playground be viewed from the house, and from the room in which someone is located most of the time. Ideal if the site is visible from several rooms or points. Secondly, it should be located away from outbuildings with “aromas”, if there are any. Thirdly, it is advisable to take into account the fertility of the soil: an infertile area or one with complex geology can be allocated for the gaming complex: there is no need to dig into the ground too much, maximum - bury the pillars 30-40 cm deep.

When choosing a location, it’s a good idea to place a children’s play corner near a wall or a permanent fence. These zones can be fully used, and in this case they can be used for games. For example, make a mini-climbing wall on the wall, attach rope ladders, a slate board and other devices no less interesting for children. You probably know what your children like, and if you don’t know, you can find out: there are enough fences and walls, place different devices in different areas and observe where your child lingers longer. So, find out which games he is more drawn to, and you will know in which direction to move next.

A slate board on a fence is fun for children and develops fine motor skills.

Lighting also needs to be taken into account. The place where children play should not be constantly in the shade, but the sun is also not needed. Approximately 2/3 of the area should be in the shade (, swing), and 1/3 - in the sun - if there is an area for active games. If there is no shade on the site, you will have to come up with a canopy or put up a large umbrella.

At the same time, please ensure that there is no constant draft in the area of the proposed site. Children, of course, need to be hardened, but not in this way. When choosing a place for a children's play area, pay attention to the fact that there are no electrical appliances or any shields, machines or other similar devices located nearby. Children are curious and inventive, so it's best not to take risks.

What area is needed

A little about the area that needs to be allocated for a children's playground. Small children don't need much space - a sandbox, a few very simple equipment, a small pool if you think it's possible. It's nice to have a lawn or a flat, smooth piece of land with some suitable covering where you can lie around to your heart's content. That's all. An area of 4-5 square meters is enough for all this. meters.

For small children, it is advisable to fence off the area. This will give you the opportunity not to be constantly nearby, but to do your own thing nearby: your children will be visible and safe. The fence can be anything - it’s a matter of your imagination, desire and capabilities. The main requirement is that it must be safe and durable or completely inaccessible to children. For example, like the chain-link mesh you see in the photo above. It comes with a plastic coating in bright colors and does not look as harsh as the usual one.

Chain-link mesh with PVC coating is a good option for fencing playgrounds

If for some reason you don’t like this option, you can put up a picket fence that will be about the height of the children’s shoulders; the distance between adjacent planks should be such that their heads cannot fit through it. Pickets can be painted with different colors.

Picket fence - a familiar fence in an unusual design

Just make sure that the tops are rounded and do not have sharp corners, and that they are well processed: splinters are very frustrating for children. The picket fence must be secured firmly. With the expectation that children will definitely hang on them and jump.

Rope fencing is rarely used, but it looks good and performs its functions perfectly: durable, safe, and aesthetically attractive.

Rope fence for a playground - durable, inexpensive, reliable and safe

For older children, the fence is a relic. For them, the field of activity is the entire site, and only something truly interesting can distract them. More space is also needed here. If possible, give children under 7 years old 8-9 m2, from 7 to 12 years old - up to 12 m2. There is already a more serious set of shells, which is why larger areas are required.

Playground covering

This is a complex topic with very difficult choices. While children are small, it is perfect for them (there is a special composition of herbs with high abrasion resistance). He is not so attractive in appearance, but he is able to endure little mischief-makers with almost no damage. The disadvantage of lawns is the need for regular maintenance: watering, mowing, etc.

For small children, the ideal surface for the playground is lawn grass.

The lawn can no longer cope with the load from the games of older children. Especially in the area of active games: near slides, swings. These are the most problematic areas. If you leave these areas “as is,” then when it rains, a puddle will form under them, and after a couple of “races,” it will turn into a swamp. There is a good solution: make a drainage pad out of crushed stone, and pour sand on top of it or lay a rubber covering like what is used in stadiums. It is durable and strong.

To remove moisture from the playground area, remove the soil to a depth of 15-20 cm, fill and compact crushed stone, pour sand on top and also compact it. Both layers are approximately 10-15 cm each. During construction, you can stop there: landing on such a site is already good. But the sand is gradually being pulled away and will have to be renewed periodically. You can lay out a rubber mat. This is more serious, you just need to make a slight slope so that the water rolls off it during rain. Some people simply install rubber mats, which are replaced as they wear out.

Another solution is to fill the entire area with fine, sifted sand. It will need to be leveled and topped up periodically, but this is perhaps the most practical solution.

Sand playground covering is “quick and hassle-free”

Another option is to add crushed bark. Another question is that not everyone has the opportunity to take this bark. But if there is, try it. The coating is soft and non-traumatic. You just need to chop it well and remove any chips that may be there.

The more technologically advanced ones include the following:

Regupol. Factory rubber coating, laid on a flat concrete or asphalt base. Cost - $25-70 per square meter.
Rubber crumb coating with added binder. It is poured onto a prepared leveled area (you can use compacted sand laid on top of crushed stone). Price - $25-80 per square meter.
Modular high density PVC systems. Plates that are connected like puzzles. The price per square is $50-70.
Artificial grass. It is laid on a prepared base of quartz sand and rubber crumbs and requires water drainage. Depending on the height of the pile, it costs from $40 to $80.

It's hard to choose. There are too many mutually exclusive demands and desires, but you have to choose something. The most common option is lawn, the second most popular is sand. The remaining coatings are applied only in places - in the most “loaded” parts.

Choosing equipment for the playground

It is best to plan elements of a playground with children. After all, it is for them that you are going to build a play area, and it is their desires that you need to listen to. Often we try to reproduce what in our understanding should be interesting for them, and then we are surprised that the children play anywhere, but not on the playground that was built with such love. All because you have fulfilled your desires and expectations, not children’s. Listen to what the child wants, visit guests who already have similar facilities, see where the child spends more time. On this basis it is already possible to build something.

For children, the playground must have a sandbox. This develops their coordination and allows them to develop faster. The usual design - four boards - is not a problem to knock down, but I want it to be beautiful as well. A sandbox machine will be interesting for boys. It is made of moisture-resistant laminated plywood painted in two colors.

Under the hood is a toy box. Inside the cabin, there is also an “entrance” to this box.

In general, wooden cars are great fun for boys. They are busy there enthusiastically. another option from an old barrel.

By the way, you can also arrange a sandbox in the back...

Another interesting idea is how to make a shadow over the playing area: fix a rod at a height, throw an awning over it, making a kind of tent. It’s not hot, and there’s shade.

Almost a ship...

Children's houses

The most popular part of a play corner among children is their own house, where they can hide from the all-seeing eye of adults and set their own rules. For children, it doesn’t matter what their house is built from. They play well in a tent made of fabric, a hut made of branches. There are many designs that are quickly and easily “built”. Moreover, even the little ones can be involved in this construction: it will be even more interesting to play in a house built with your own hands.

For example, a hut. Watch children playing. This is exactly the building that they erect most often. In different regions they call it differently: some as their “headquarters”, others as their “home”, hut, hut. They usually use sticks, blankets, and other available materials. The following several designs of houses for children were made based on this “house construction”.

The cheapest way to build a summer children's house: put several poles in a hut, plant bindweed around it and wait a couple of weeks for them to grow. This living hut can have any shape: in the form of a cone, as in the photo, a traditional hut, more like a house, etc. Tie the poles together with twine, plastic clamps or something similar. It is only important to ensure a sufficiently stable frame, otherwise naughty children may topple the structure.

In general, there is no need to wait until the plants grow. You can sew a fabric cover, make an entrance like in a wigwam... There are a lot of possibilities for using your imagination.

A quick and absolutely safe way to build a children's hut is to fasten panels of fabric to a hoop. Hang this structure, for example, on a tree. Lay out the mats under it and attach the panels to the edges. It will turn out to be an excellent summer house in which children will feel cool and comfortable.

A hut made of hoop and fabric - fast, cheap, safe

Moreover, this design is suitable not only for girls. Hang camouflage netting or camouflage fabric on the hoop. The boys will definitely set up their headquarters in it.

If your child dreams of a house like yours, there are even more options. It is usually built using frame technology: pillars are buried in the corners, and the lower and upper frames are attached to them. The lower frame is the base for the floor, the top one is the base for the ceiling. If the house is planned to be high, a sandbox is often placed below. The house located on top protects it from rain and sun.

If the house is planned at ground level, construction can be started differently. Place the blocks on which it will stand level, lay timber on them (80*80 mm or 100*100 mm), connect it into a rectangle, fasten the corners with metal overlay plates. Then attach the racks to the bottom frame in the corners, which will become a support for the walls and roof.

Some children like to have a house, just like adults: with a porch, a real door and window, a sofa... Parents have also done this more than once. The basis is the same: timber from which the frame of the building is assembled, and it is sheathed depending on desire. It’s faster to work with sheet material, such as waterproof plywood, and longer with boards or clapboard.

A house like from a fairy tale - carved, on a stump

Slides for children

Slides are no less popular with kids. The fast descent is a lot of fun. This is where difficulties arise for parents. What to make a children's slide from? The traditional coating - a sheet of stainless steel - has now become very expensive, and leaving it on the street unattended is dangerous - it will be carried away. Ordinary steel will not work - it rusts very quickly, so you have to look for a replacement. There are several options:

Moreover, it is very rare to make a slide at the dacha or near the house. Usually this is only part of the play complex, which includes various equipment: rope and ordinary ladders with different angles of inclination, hanging paths, nets, swings on chains or ropes, poles with crossbars and, in general, everything you can think of. You will find some ideas below in the photo gallery.

A wooden slide is only part of a play corner for children at the dacha. A set of stairs, a swing with a children's slide

Swing

Hanging ones are popular not only among children, but also among adults. There are many different options - from models for babies to older children. You saw some of them in the photo above. To create such entertainment, you do not need many materials: chains or ropes on which the seat will be attached.

If you use ropes, you need to regularly check their condition: they become less durable from exposure to the sun and can fray. Chains are more reliable in this regard: they can withstand heavy loads, but they pose another danger: when the chain links move, they can pinch the skin. It is very painful and results in large bruises. But there is a way out. In order to hold on safely, hoses are put on the chain in those places where they are grasped with hands. Their shell protects the hands of children and adults who swing the swing (or ride themselves).

The only problem is that curious kids love to pick at the pipes, so look at them periodically. Sometimes covers made of very dense fabric such as tarpaulin are used as a protective layer.

Questions often arise about how to attach chains or ropes to the crossbar. The most popular solution is carabiners. But they have two drawbacks: when rocking, they creak quite a lot, and they gradually wear out. The rate of wear depends on the mass of swinging children (they do not always sit on the swing alone) and on the intensity of use. Both problems can be partially solved by periodic lubrication, but only partially. The second option is to use bearings, but you can’t do without welding. See the photo below for several options for attaching the swing to the crossbar.

Where can I get such devices? In stores selling rigging. Perhaps you will find other ideas there.

The question often arises: how and from what to make a seat. Yes, from anything. Even from a tire or a piece of tarpaulin, an old chair - wooden or plastic, just a piece of board. Craftsmen manage to use an old chair.

A circle tied with ropes is a great option

An old chair on a swing - why not?

Having slightly modified them and hung them only slightly above the ground, we teach not a swing, but a simulator for developing balance. The option with a skateboard will be especially interesting for boys. And on the wide platform you can swing while sitting...

Stairs and walkways

Stairs are one of the key elements that connects all the disparate parts into a single whole, allowing you to move from one projectile to another. They are made from well-treated wood. The steps should be round (at least 5 cm in diameter so that they are easy to grasp with your hands) and straight. You can make rope steps: they are harder to climb, but they develop coordination well.

Rope climb - difficult, but very interesting to overcome

Hang a rope net on one side and make a rope ladder. It’s not for nothing that rope projectiles are present in all extreme shows. They are safe, but require well-developed coordination and dexterity. At first it’s hard for the kids, but it’s precisely these “projectiles” that they are drawn to.

A rope wall and ladder are a great way to make your play area more interesting.

Here is the basic set of elements from which children's playgrounds are assembled. For older boys, you can add a horizontal bar and rings. They already need to develop not only coordination, but also muscular strength. In general, there can be a lot of ideas. Some of them are in the photo below. We hope that the playground made by your efforts will bring joy to the children and pleasure to you: it’s always nice to look at something you’ve made with your own hands.

Photos of playgrounds and elements

A water mattress in the heat is the best place to relax

Descending from a platform made of ropes - for coordination of movements

Children's playground with a house on high legs - drawing with dimensions

One of the options for a children's house with a sandbox under one roof

Hemp is a convenient projectile

Children's corner - pirate ship

Metal complex - for those who know how to weld metal

Today, the birth rate in the Country has gone up. There are a lot of loud children playing in city yards, and they are trying to create all the conditions for their successful growth and development. After all, it is in childhood that a person’s character and personality are laid and formed. The task of parents at this time is to surround their child with care and love as much as possible, but the main thing is not to overdo it!

In the city courtyards, children have a place to roam; many little towns and sandboxes have been built. But in rural areas, things are not so good and parents mostly make sandboxes, swings and playgrounds themselves.

Let's look at one of the examples provided by the author. A caring father built a town with a sandbox for his children; for this he needed the following components.

Materials
1. board
2. beam
3. soft roof
4. paint
5. paving slabs
6. nails
7. screws

Tools
1. chainsaw
2. jigsaw
3. hacksaw
4. ax
5. hammer
6. plane
7. sandpaper
8. grinder
9. roulette
10. brush
11. screwdriver

The process of building a children's playground with your own hands
And so the construction itself begins naturally with the choice of a place for construction and its marking.

The playground should be located in a sunny place, the main thing is that the place is closed from the draft wind, so that the children do not get caught in the wind during a fun and playful game, you need to protect the kids from such a threat and calculate everything in advance.

The floor is laid with paving slabs, which he also made himself. He places more beams on which the ladder will be fixed.

Then the master proceeds to the construction of the rafter system.

Lays the floors in the house accordingly.

Sheathing is being sewn on the roof.

A soft roof, flexible tiles or roofing felt is laid on top of the sheathing. Soft roofing is ideal for small and light buildings.

The walls of the house are finished with clapboard or boards.

Upon completion of construction work, the author proceeds directly to painting the children's playground. You should use different colors such as red, yellow, blue, green. Only colors that are bright and pleasing to the child should be used and under no circumstances should you use black.

And after the paint has dried, the town can be used for its intended purpose.

This concludes the article. Thank you for your attention! Come visit more often, don't miss out on what's new in the world