Auxiliary and near-station equipment. Near-station and auxiliary equipment Near-station and auxiliary equipment from "nevastankomash"

It is difficult to imagine modern wood processing without the use of near-station mechanization for sawmilling. It is an essential component of a modern wood processing enterprise. It optimizes the supply of raw materials, waste disposal and automates production as much as possible.

Near-station mechanization for sawmilling- a general concept that involves the use of such means as roller tables, loading racks, logs, log spreader, loading device. This and many other equipment is produced by the PILOTEKHNIKA company.

Roller table, used to transport and manipulate lumber between equipment in sawmills, is called roller conveyor.Roller tables They work perfectly in automatic mode, they independently separate the sawn products and the discharge of lumber thanks to several additional options: a chain feed drive, a winding drive, separating lamellas and a spreading knife.

After transportation, the lumber needs to be loaded and is used for this loading dock... It allows you to carry out loading and unloading operations at unequipped warehouses and sites, and greatly facilitates the unloading of trucks and wagons.

Between the process of manufacturing and transporting the finished lumber, a loading device is used to pre-accumulate the blanks and feed them to the head machine for processing. Structurally, the loading device is a simple and reliable tool for working in any production environment.

Roller tables, loading devices, log throwers

In order to maximize their production automation, longitudinal forestry conveyors are equipped with a device to simplify the process dropping logs. Log spreader It is installed along the forest transporter opposite each of the logging sites. Log spreader possesses some design features that make it possible to ensure high accuracy of dumping, minimal spread of the ends of the logs, etc. Log spreader works with a minimum throwing force, without large dynamic loads on the ejector.

For longitudinal transportation of logs, it is used lognotice... It consists of a chain with cross-beams with spikes that capture and hold the logs, two blocks (drums or sprockets), one of which is a leading one with teeth or ledges, and a drive station. Lognotask used when unloading logs from the water and shipping them to a warehouse or sawmill. Lognotask can be mounted on an overpass of any height and serve for supplying logs to the warehouse. On farms, it is used for unloading and transporting short logs ranging in size from 1-2 m.

It is difficult to imagine modern wood processing without the use of near-station mechanization for sawmilling. It is an essential component of a modern wood processing enterprise. It optimizes the supply of raw materials, waste disposal and automates production as much as possible.

Near-station mechanization for sawmilling is a general concept that involves the use of such means as roller tables, a loading rack, a log notation, a log spreader, a loading device. This and many other equipment is presented in the catalogs of the "KAMI" company.

A roller table used to transport and manipulate lumber between equipment in sawmills is called a roller table. The roller tables work perfectly in automatic mode, they independently separate the sawn products and the discharge of lumber thanks to several additional options: a chain feed drive, a winding drive, separating lamellas and a spreading knife.

After transportation, the lumber needs to be loaded and for this a loading rack is used. It allows you to carry out loading and unloading operations at unequipped warehouses and sites, and greatly facilitates the unloading of trucks and wagons.

Between the process of manufacturing and transporting the finished lumber, a loading device is used to pre-accumulate the blanks and feed them to the head machine for processing. Structurally, the loading device is a simple and reliable tool for working in any production environment.

Roller tables, loading devices, log throwers

To bring their production to the maximum of automation, longitudinal forest transporters are equipped with a device to simplify the process of dropping logs. A log spreader is installed along the conveyor, opposite each of the logs. The spreader has some design features that allow it to provide high accuracy of dumping, minimal spread of the ends of the logs, etc. The spreader works with a minimum dumping force, without high dynamic loads on the spreader.

For longitudinal transportation of logs, a log notation is used. It consists of a chain with cross-beams with spikes that capture and hold the logs, two blocks (drums or sprockets), one of which is a leading one with teeth or ledges, and a drive station. Log notation is used when unloading logs from the water and shipping them to a warehouse or sawmill. A log notch can be mounted on an overpass of any height and serve to supply logs to the warehouse. On farms, it is used for unloading and transporting short logs ranging in size from 1-2 m.

The organization of efficient production presupposes the correct creation of technological lines. In each workshop or workshop, not only the main woodworking equipment, but also the near-station equipment must be present. Thanks to the competent selection of additional devices, it will be possible to improve the quality of the manufactured products, as well as reduce the time and effort for its production.

Near-station and auxiliary equipment is called a technique that allows you to automate a technological line as much as possible. The purchase of ancillary equipment will significantly reduce human participation in the creation of goods. In other words, it will be possible to reduce the likelihood of marriage due to inexperience or carelessness of the operator, as well as eliminate the possibility of time delays. Near-station equipment allows to significantly improve labor safety in production.

A distinctive feature of the auxiliary equipment is the ability to work in difficult conditions, for example, with increased dust, high / low temperatures. Most models provide the ability to adjust the speed of the delivery of goods. To cover the main parts of this type of technology, powder paint is usually used, which protects the product from corrosion and gives it an aesthetic appearance.

Near-station and auxiliary equipment from "NEVASTANKOMASH"

A large selection of auxiliary and near-station equipment is presented in LLC "NEVASTANKOMASH". We offer equipment only from the world's leading companies, so we can guarantee its high quality and long-term uninterrupted service.

We offer the following types of near-station equipment:

• Roller tables for moving bulk goods (bars, lumber, pallets, boxes, etc.). These devices are usually used when the use of a belt conveyor is impractical on the production line.
• Automatic feeders for feeding rough surfaces. Such installations are intended for use in conjunction with planing and planing machines.

For many years we have been working directly with manufacturers, therefore we offer the most affordable prices for near-station equipment. Buy auxiliary machines in "NEVASTANKOMASH" in order to qualitatively modernize production and increase production output.

Designed for longitudinal movement of raw materials from the lower warehouse to the first row sawmill equipment. They are used for the piece-by-piece supply of logs to the sections for preparing raw materials for sawing and to the sawmill at the sawmill and woodworking industries.

Designed for the piece delivery of round timber to various types of log saws. They are produced with a hydraulic and electromechanical drive of the piece-by-piece dispensing mechanism. Available in various lengths on request. They are used as loading equipment in sawmills of woodworking industries.

Designed for unloading longitudinal forest transporters (logs). Unloading is carried out perpendicular to the direction of transportation on one side. The dumpers have their own bed and are built into the trunk line instead of the intermediate stack of logs. The drive of the mechanisms is hydraulic or mechanical.

1

It is intended for buffer accumulation of raw materials in the lines of lower warehouses and its supply to the sawmill equipment of the first row through loading uncoupling devices. They are also used when the production line includes 2 or more machines of the first row with different technological performance.

0

Designed for longitudinal movement of raw materials from the lower warehouse to the first row of sawmills. It is used for the piece-by-piece supply of logs to the sections for preparing raw materials for sawing and to the sawmill at the sawmill and woodworking industries. The peculiarity of the logs is the possibility of separate ordering of the components of the logs: the drive / tension station, the tray-stack of the logs and the traction chain with cross beams.