Hidden heating. Decor pipes in the interior: original ideas (50 photos)

If you have a heating and gas pipe in your kitchen or in any other room that does not fit into the design of the space, then you can easily decorate it with improvised means. Today there are a large number of ways to disguise a heating pipe without disrupting the heating process. In order to decorate pipes, you need to be creative. In the process of decorating, it is useful to familiarize yourself with the following recommendations:

• It is not recommended to hide irreversibly communications in the house or in the apartment. The fact is that threaded connections can fail, leak. In order to restore their performance, you must have unhindered access to them.
• Risers and liners are directly involved in space heating. If you use decorative boxes, it can get a little colder in the room.
• Decorative covers and boxes should be easily dismantled during use. It is better to use grids that have large cells.

Popular ways to decorate pipes

Heating pipes are decorated using two popular methods. The first method involves decorating the structure using various decorative means. The second method assumes that the pipe should be hidden from human eyes. Consider the most popular decoration methods today:

• Coloring. This option is the simplest and therefore the most popular. To implement it, you need to choose the color of the pipe, remove the old paint and apply a new coating to the surface. Which paint to choose? Alkyd paints are perfect for heating pipes. In this case, you do not need priming for staining. It will be enough to remove dust and dirt from the surfaces.
• Use of decorative coatings. The pipe can be wrapped with jute or hemp rope. This option has a disadvantage: the riser is insulated. You can also use a bamboo trunk for decoration. Only it should be split along and glued parallel to the vertical pipe.
• Using rings on the floor and ceiling. Such rings will not hinder the repair work.
• Plasterboard boxes for camouflage. A frame made of a galvanized profile should be sheathed with plasterboard. In the future, it can be painted or pasted over with wallpaper.
• Installation of false walls. This method is combined with wall insulation. On the base wall, you will need to collect the crate. Between its profiles, the insulation is fixed. After that, the structure should be sheathed with plasterboard or any other material.
• The use of curtain rods or curtains. This option is simple and safe. The cornice should be installed to the full width of the wall next to the window. Wall drapery is done using dense curtains from one corner to another.

Interesting design solutions for pipe decoration

If you decide to decorate pipes on your own, then you will first need to familiarize yourself with a wide range of design solutions. Dyeing is the most popular method. You can not only paint the plumbing element in the desired color, but also draw absolutely any picture on it. Branches of trees will look very impressive. Such decor is within the power of any person. Art education is optional.

Depending on the style of the room, the decor of a gas or heating pipe, painted in bronze, gold or silver, looks spectacular. When choosing a color, pay attention to the color of the wallpaper, doors, window sills.

If you are looking for the least expensive option, try using decorations for decoration purposes. You can decorate pipes with a wide variety of decorative elements. Materials such as ribbons, buttons, fringe, laces, fabric, fur, beads and much more are great for this purpose.

Try to decorate the pipe using a variety of toys such as animals, insects, made by yourself or purchased from the store. The pipe itself can be painted to match the color of the tree trunk.

The heating pipe can be decorated with stained-glass windows. At first glance, this method may seem incredible. Glass or transparent plastic is used for decoration. This method of decoration can be safely combined with a variety of lighting techniques. In addition, such a spectacular composition can function as a night light in a room.

Decorating using decoupage technique

The decoration made using decoupage technique looks refined and original. This technique for fabric or furniture involves cutting out a variety of images. Pictures made of fabric, paper or leather are applied to the surface of the pipe. Such a design will help to give a bright and non-standard accent to the design of the room.

Batteries are processed before being decorated. They are cleaned and sanded. Then the battery is covered with enamel paint. The length and width of the pipe must be measured. After that, you can start cutting out various images.

It is better to glue the fragments using PVA glue. If the image is securely fixed, then it can be varnished on top. Drawing can be of a wide variety of subjects. The main thing is that it fits well into the design of the room. By the way, you can attract children to decorate the pipe. The decor will turn out to be bright, original and cozy.

Tuba decor in the kitchen and bathroom

If you need to hide and decorate communications in the kitchen, then this is easy to do with a furniture set. So horizontal risers can be easily hidden behind a kitchen cabinet.

The vertical pipe can easily be veiled with a floor case. With a small budget, you can safely use furniture that mimics the real thing. Fake designs will help you easily hide unsightly communications that do not fit into the overall design of the room.

You can disguise the gas pipe using parts of the furniture set. This method is the most optimal. You will not only hide the pipes, but, if necessary, you will have free access to the column, fittings and the meter.

Decorating any heating pipe in the bathroom can also be done easily and quickly enough. This can be done using the above methods or any others. Before starting work, it is recommended to clarify information about what material the pipe is made of: stainless metal, plastic, etc. Most modern materials do not need staining. If the pipe is made of ferrous metal, then it must be cleaned of old material before painting.

There are many ways to decorate a pipe. Having weighed all the pros and cons, you can find the best option for yourself. When choosing it, it is important that the general stylistic idea in the room is preserved.

Any unsightly pipe can be made an original decorative element in the room. When decorating, do not forget that a heating or gas pipe must, first of all, fulfill its main functional task. If you get creative, the result will exceed all your expectations.

roomplan.ru

How to decorate heating pipes

Modern heating pipes do not spoil the interior at all. They can be installed in special niches, hidden in wall panels or floor coverings. In some houses, there is simply no heating system. What to do for those who have a standard heating system in their house, installed since Soviet times. Such radiators not only do not fit into the interior, but also spoil the appearance of the room. How to decorate heating pipes? It's actually not that difficult. It is enough just to show imagination and ingenuity.

In what cases it is necessary to decorate the heating system in a residential area:

• if the pipes of the heating system are located under the ceiling;
• overhanging radiators of large sizes are used.

Peculiarities

Features of decorating pipes

Before you decorate heating pipes yourself, you need to consider the main features and nuances of work:

1. You shouldn't completely hide the communication system. In the event of a pipe break, it will be difficult to repair them. It will also be difficult to completely replace pipeline parts with new ones.
2. After decorative closing of the risers with boxes, their level of heat transfer will decrease. This will lower the room temperature.
3. If the heating pipe is completely recessed into the wall, a large area of ​​thermal conductivity will occur. Conversely, this will lead to an increase in the level of heat in the room.
4. When closing heating radiators with decorative boxes, do not forget about natural air ventilation. The box must be equipped with a ventilation grill that ensures natural circulation of air flows.
5. Decorative boxes must be prefabricated. In this case, it will be possible to replace parts of the heating system, repair it and clean the radiators.

The ways

Among the most common methods for decorating heating pipes in a room are the following:

1. Installation of pipes in wall panels, floor or ceiling surfaces.
2. Use of special boxes and panels.
3. Decorative decoration.

The heating system can become a bright decoration of the room.

Pipe masking

One of the popular decorating methods is to install heating pipes in a wall, floor or ceiling. Thus, the heating system will be completely hidden from view.

Note! Soviet-style pipes cannot be installed in the wall. Polypropylene or metal-plastic pipes are best suited.

Stages of work

1. Carrying out markings and layouts of the pipeline.
2. Depressions are made in the wall in the places where the pipes run. When calculating the dimensions of the recesses, the thickness of the insulating material and the pipe embedding material must be taken into account.
3. To ensure that the pipes are securely attached to the wall, holes are made in the recesses with dowels and brackets.
4. If pipes made of metal-plastic are used, a special casing must first be put on them. It will keep heat in the pipes and prevent heat loss.
5. Removable fittings must not be bricked into the wall.
6. The pipes are placed in a special casing and mounted on the wall. It is necessary to prevent heat loss.
7. Checking the system operation. After the system has been tested, it is necessary to close the grooves with a special solution.
8. In places where pipes enter the floor, decorative linings must be installed.

They are shown in the photo:

Decorative pipe covers

With decorative camouflage of pipes and radiators, special boxes are gaining more and more popularity. They can be made by yourself or purchased from a specialist store.

Box making

Box

The decorative box can be made of the following materials:

• plastic,
• wood,
• drywall,
• PVC panel.

To make a decorative box, you will need the following materials:

• scissors,
• measuring instruments,
• self-tapping screws,
• dowels,
• drill,
• cladding material,
• screwdriver,
• cutter.

Stages of work:

1. Marking around the pipes in relation to their location on the ceiling, wall and floor. It is also worth considering the size of the materials, the distance of the pipes to the walls of the box. It is not necessary to fix the box close to the pipes. It is necessary to maintain at least a minimum distance between them, which is 3 cm.
2. The box is mounted on a special frame. First of all, you need to install it. The frame can be made from wooden planks or metal profiles. The frame parts are connected to each other using self-tapping screws and cutters.
3. Installation of rack profiles on the wall.
4. Fastening the rails to the floor.
5. Installation of rails on the ceiling.
6. Installation of corner profiles. Depending on the design, there can be 1 or 2 of them.
7. Frame cladding. Plasterboard panels or decorative tiles can be used. When cladding, care must be taken to form as few joints as possible.

There are also ready-made boxes for heating radiators. They are shown in the photo:

Battery box
Radiator grilles

Using plastic panels

Another affordable way to decorate the heating system. The method consists in the fact that the pipeline is not hidden in a special box, but with the help of drywall a false wall is made, behind which the heating system is completely hidden. This method is bad in that it takes away extra space in the room. This is not very advisable in a small living space.

The advantage of this method is that when the wall panel is installed, a kind of box is formed inside it, the empty space of which can be used for economic purposes.

Use of curtains

Disguise behind curtains

This method does not require special construction skills. It consists in the fact that the heating system in the room is closed with curtains. This gives the room a cozy and unique design.

1. A ceiling cornice must be installed over the entire width of the wall.
2. Installation of dense curtains across the entire width of the wall. Drawn curtains close off the heating system. If necessary, they can be opened to let in sunlight.

Decorative decoration

All of the above methods are quite costly. An excellent alternative to them is decorating and decorating heating pipes with your own hands. There are no restrictions here.

Decoration

This method is especially relevant for decorating the heating system in the kitchen. The decorated pipe will become a cozy part of the kitchen interior.

Working methods:

• painting,
• decoration,
• covering the surface with unusual materials.

Painting

When painting heating pipes, the following material requirements should be taken into account:

• moisture resistance,
• wear resistance,
• resistance to damage,
• endurance to temperature extremes,
• safety for human health.

To paint the pipes of the heating system, you can use water-based paints, acrylic paints and alkyd enamels.

It is not necessary to paint the pipes in a solid color. An interesting solution would be to apply a pattern and pattern to the pipe.

Battery painting

You can decorate the heating pipe using any decorative materials.

An example of materials used for decoration:

• beads,
• buttons,
• ribbons,
• laces,
• rope,
• leg-split,
• threads,
• floss,
• knitting yarn,
• textile.

A simple example of a decorative solution is twine entwining. Its pleasant woody color will fit well into any interior and create a cozy atmosphere. To complete the decoration in this way, it is enough just to tightly wrap the pipe with twine and secure it.

You can also use additional decorative elements in the design. So, decorative foliage can be fixed on a pipe entwined with twine. Thus, the heating pipe will turn into wood.

Twine wrapped pipe

• Decorating with bamboo. This noble natural material will look great in any room. Its shape fits perfectly to the shape of the pipe.

You can also decorate heating pipes with any materials at hand.

Photo

Painting examples
Decor ideas
Bamboo decor
Bathroom decoration Masking the pipe with shells
Decor with bamboo

Video

We offer you another idea for decorating pipes.

Last revised: 20.02.2015

Related Articles

Related Videos

trubyinfo.ru

How to decorate a heating riser: a selection of ideas for the practical and creative

There should be nothing superfluous in the interior - the wiring can be hidden under the false ceiling, the pipes can be hidden with wall panels or wiring on the floor, and the batteries can be covered with lattice screens. And how to decorate the heating riser so that an ugly but important detail does not spoil the impression of the renovation and fits well into the design? There are more than enough options for this, most of them do not require much effort and significant costs.

Decorating ideas without major renovation

Many decoration methods are so simple that even small children can cope with them. Taking the proposed options as a basis, it is easy to supplement them with your own zest and get a unique result.

Coloring - simple and fast

The easiest way is to "dissolve" an ugly pipe in space using paints and a brush, painting the riser to match the walls. In some cases, it is appropriate to paint in the color of the radiators, for example, if they are made in a retro style and represent an imitation of antique batteries with silver plating or gilding. In order not to stain the ceiling and hide the sloppy border of staining, it is recommended to put on a plastic ring, invented for stretch ceilings, on the joint.

The joint line is easy to hide with the help of special rings

Floor ring

You don't need to be a great artist to transform a riser into a birch trunk and complement the picture with a lush green crown on the adjoining wall using stencils. It is not necessary to take birch as a basis, you can "plant" an oak in the room or even get away from the theme of trees and simply decorate the boring "appendicitis" with ladybirds, polka dots, imitation stone or blurred patterns in the avant-garde style.

"Birch" in the interior

Wood decor

Contrast coloring and a little fantasy

Ideas for creatives

If you don't like working with paints, you can use a rope to decorate. First, the pipe is wrapped with jute or twine, and then decorated with suitable details. These can be cones, shells, sea stones, children's toys, a collection of badges, artificial fruits and flowers. If necessary, the lower part can be easily turned into a cat scratching post, having previously increased its diameter using a cardboard tube.

The heating element is hidden by a decorative rope

A riser hidden in a bamboo trunk will look very stylish. To do this, the trunk is cut to length, the internal partitions are removed and the sections are ground. The workpieces are put on the riser, and then pulled together in several places with a rope of a suitable color. This idea can be used not only for a Japanese-style home, but also in other eco-friendly directions. It is recommended to decorate the room with a few bamboo sticks as a distraction.

Using bamboo trunks

It is worth fantasizing a little more about how to decorate a heating riser, and among the possible options there may be pipes decorated with lace, satin ribbons, stripes of fabric, openwork knitted covers. The main thing is that the “clothes” do not contradict the design and are not afraid of the effects of heat.

Decor instead of a pipe

It is not recommended to glue the pipe with vinyl film, but you can first make a frame from toilet paper rolls, and then hide the cardboard under a film with a beautiful pattern. Also, the paper can be painted in an unusual color, even if you don't like it, getting rid of the bright spot will be easier than repainting a metal pipe.

Decor methods for lovers of solidity

If you want to completely hide the signs of a heating system, you should take a closer look at more complex but effective methods.

Decorative false columns

For interiors decorated in luxurious styles, all "folk" methods may be too simple. In this case, it is best to decorate the heating riser with the help of columns made of polyurethane. The semi-columns are easily attached to the wall with liquid nails, and if you need access to the pipe, they can be easily removed and returned to their place. To get a beautiful interior, it is recommended to use several elements.

Columns decorate the interior and reliably hide the heating risers

The round and square columns will need to be cut, positioned so that the pipe is inside, and carefully glue them together with transparent glue. This spectacular technique helps out if you need to decorate a riser that turned out to be in an inconvenient place after redeveloping an apartment and dismantling partitions.

Drywall box

For those who know how to hold in their hands not only brushes and a glue gun, but also have the skills to work with serious tools, there is a more complex option - a drywall box. Under this capital structure, it is easy to hide the pipes leading to the radiator at the same time. The decoration of the box is most often done to match the walls, but sometimes there is a creative design, for example, decor with artificial stone, mirrors or mosaic tiles. To build a box in the corner, you will need three metal profiles with stiffening ribs, ranging from floor to ceiling. A very rigid profile is not needed as it is difficult to work with. To obtain an even structure, the contour of the box is drawn on the floor and transferred to the ceiling using a special laser device or other devices. Two profiles are fixed to the wall, and the third is screwed to the floor and fixed to the other two using special fasteners.

Frame ready for sheathing

The stability of the structure is given by means of horizontal lintels made of the same profile. The finished frame is sheathed with plasterboard, cut to size. Instead of drywall, you can use MDF, laminate, parquet board, plastic panels, pre-pasted with a film of a suitable color.

It's time to think about finishing

In the same way, the risers are closed on four sides.

View after completion of finishing works

The construction of the box requires skills in working with frame structures, if such knowledge is not yet in the baggage of knowledge, it is better to seek help from professionals.

Video: an example of decorating a heating pipe

teploguru.ru

Decorating heating pipes: how to come up with an original design

For residents of new buildings, the question of how to decorate heating pipes is usually not worth it. These necessary structures are positioned so as not to be conspicuous. It is more difficult for those whose houses were built quite a long time ago, when more attention was paid to the performance of their direct function by heating systems. Previously, no one thought about the fact that such necessary components of living space can and should be somehow "hidden".

Meanwhile, it is not so difficult to make thermal communications invisible, it is worth showing a little imagination and choosing the right materials. Then no one will guess that in the most conspicuous place there are heating pipes that were once so unsightly - a decor that you can bring to life with your own hands will hide them.

Interesting decor can become a real highlight of the interior.

Methods for decorating heating pipes

Suppose that in your apartment there are old heating systems that are out of place heating pipes: the design of such objects can be limited only by your imagination and material capabilities. Let's list some of the simplest and most accessible ways for everyone to show their creative individuality:

1. The simplest solution is to simply paint the protruding pipe in the color of the wall.
2. Investing a little more - both labor and time - will require decoration.
3. The most time consuming is, undoubtedly, an attempt to hide pipes behind furniture or to build a simple structure specifically for this purpose.

You can make decorative boxes for heating pipes from any suitable material that will correspond to the design idea of ​​decorating the room:

• drywall;
• wall panels made of polyvinyl chloride or MDF;
• laminate;
• parquet board on a slatted frame.

The most popular is drywall. This material allows you to create structures of various configurations. Read about the features of its installation in the article "How to hide heating pipes".

Some interesting ideas

Let's consider in a little more detail some of the design techniques that can be useful when carrying out work to "hide" or give a more aesthetic look to heating pipes. Examples can be viewed in detail in the photo.

Dyeing

Here are some examples of ready-made solutions:

1. You can try to make the pipe part of the interior, for example, a children's room.

If you deviate from the generally accepted white color, in which pipes of the heating system are traditionally painted, you can "turn" the vertical pipe in the corner of the room into wood. And already from this trunk, go to the painting of the adjacent walls, drawing branches on them. Such work is within the power of even a non-professional artist.

You don't need to be an artist to turn a pipe into a "tree"

And since there are branches on the "tree", then leaves are also needed. The process of "growing" leaves on a tree may well be entrusted to your child, if he has already learned how to hold a brush in his hands. It is very easy to interest your child in this process if you periodically change the color of the leaves on the home tree according to the seasons. Such "seasonal" decoration of heating pipes will be an excellent game that combines not only unobtrusive teaching of the child to be accurate at work, but also a way to develop observation and love for nature.

1. In a completely different way than in the nursery, you can approach the issue of painting the heating pipes in the bedroom or living room.

Here, a noble golden tint, or restrained silver, will be appropriate for decoration. A muted bronze color will also look good. The main thing is that this color is in harmony with the general style of the room.

With a skillful approach, you can turn heating pipes into a real work of art.

You can not limit your imagination or use one of the ideas in your own way:

• An interesting technique for decorating a heating pipe is to simply wrap it with a hemp or jute rope. If you are not embarrassed by a slight decrease in heat transfer from pipes, then this option can be considered.

Rope decorative trim

• An interesting option would be to use bamboo trunks split along the length. Such halves can be glued into an original semblance of a casing for a vertical pipe.
• And if artificial flowers are used instead of bamboo (or together with it), such a decoration will not go unnoticed by your guests, completely hiding its "base" - the heating pipe.
• In those places where the pipes enter the floor or ceiling of the room, as well as in the places where the pipes from the riser to the radiators, you can install nice decorative overlays on the heating pipes. Having picked up the color and texture of such a decoration, you can logically complete the image that was conceived.
• One of the options for ceiling linings can be rings, usually hiding the inevitable cuts that are made around the risers in stretch ceilings.
• Using fabric draperies similar to the curtains on the windows will add some charm to the room.

Tubes hidden under the curtains-threads

Stained glass

The once fashionable way of decorating a home - stained glass - is returning to modern design developments. It is worth thinking about using such an unusual way to decorate a room by combining an original decorative element with the most ordinary heating pipe. An elegant partition with stained-glass elements will be able to change beyond recognition that corner of the room that did not look very elegant before.

Decorative radiator grill

The solution to the problem of how to close the batteries, which do not always have an elegant, decorative and attractive appearance, should take into account not only the aesthetic component. What looks beautiful in the photo, in practice, can lead to a significant decrease in the temperature in the house. It is important to take into account that, in addition to a purely decorative function, a panel (screen, box), which helps to decorate heating devices, in families with small children also performs a very important functional purpose, protecting the child from both burns and sharp corners of the battery. Therefore, we will consider the decor of the battery in the room from the position of three specialists at once - a designer, a heating engineer and a plumber

The problem of how to hide in the apartment Radiator and the pipe supplying the coolant can be considered in two aspects. The first is on the eve of a major overhaul, when it is possible (and necessary) to replace the battery. In this case, you can select and install designer batteries and then the question will disappear by itself, and the heating efficiency will not decrease (more on this below). For example, if we are talking about a room in the classic Victorian style, then you cannot do without cast-iron batteries, powerful, massive, on a stand, with molding in sections - such radiators will become a stylish part of the overall interior.

Another thing is when the repair does not imply the replacement of plumbing, in this case there are several options for how and how to close the battery.

Painting

The easiest way to hide the battery is to simply paint it to match the wall, near which the radiator is fixed. You just need to purchase a special paint for painting batteries. This is an option when radiators fit the general style of the room.

Hinged screens

Screen-box

It allows you to completely decorate the entire heating radiator, while such a screen on the battery with your own hands can be simply made of wood, the diagram is shown in Fig. 1.

At the same time, the box can not only hide an aesthetically unsightly radiator, but also act as an additional piece of furniture, for example, a stand for vases, shelves, or it can become part of shelving or console. A decorative wooden box can be made to match the style and decor of the room. Its main disadvantage is the closed top, which greatly reduces the efficiency of convection. In addition, the tree dries up when the temperature drops. In this regard, MDF screens (boxes), which are both cheaper and more durable, look preferable.

Advice! If the radiator is located far enough from the wall, then by combining the window sill and the box, you can make a bench for romantic gatherings by the window.

Plastic grilles

Cheap, but at the same time definitely not for living quarters, they will hide the battery / pipe, but when heated, they can emit compounds dangerous to humans, especially if the panel (grille) is made of cheap plastic by a "gray" manufacturer.

Advice! Plastic screens are suitable for non-residential premises, taking into account the resistance to high humidity - for bathrooms.

Glass screen

A glass panel, as a rule, is a rectangular sheet made of translucent thick glass, which is fixed to the wall with steel holders. Giving the opportunity to decorate the heating device from the front, it, leaving an open space at the bottom and top, does not interfere with the free convection of air. A popular solution is a photo-printed glass panel.

The main task of a heating radiator is to heat a room, which it does by a combination of two methods. The first is infrared radiation, in which heat is transferred directly to objects that are located in the room. It is this heat energy that we feel when we bring our hands close to the battery. The second method is convection, due to the heating of the air, which, rising upwards, displaces the cold air, thus organizing the circulation of air in the room, which leads to a more or less uniform temperature distribution.

Therefore, you should immediately decide on the main thing - no matter what way to hide pipes and radiators in an apartment is chosen, any decor of the battery will definitely lead to a loss of heater power. A simple example - installing a glass screen almost completely blocks infrared radiation. And the more the cover (screen) on the battery has a solid (without holes) area, the “deeper” the battery is hidden, the more significant the losses will be. Solid (deaf, no holes) boxes above the radiator are especially unacceptable - after all, they block the warm air rising up. The photo below shows a particularly unfortunate design designed to decorate the battery.

On the one hand, it still does not fulfill its role to the end - the supply pipe is very clearly visible. On the other hand, there are very small holes, which significantly reduce the movement (convection) of warm air, and a solid screen (even if it is metal) blocked heat radiation. That is why, from the point of view of heating technology, the ideal choice is a panel made as a coarse mesh.

In fig. 2 shows a sectional view of an almost optimal grille model for a heating radiator.

Infrared (aka direct thermal) radiation, indicated by red arrows (3), passes through the grating (D) with minimal losses. It is worth paying attention to the thermal insulation screen (A), which reflects heat (part of the infrared radiation) and, instead of aimlessly heating the walls, returns it back to the room.

Cold air (indicated by a blue arrow 1), coming in from below, heats up and rises. To prevent the heated air from stagnating under the windowsill, forming a thermal cushion that blocks convection, a visor (B) is installed, directing the air flow outward. In the upper part, it is also worth installing an injector (two metal plates), which allows you to remove heated air from the front side of the radiator. It manifests itself especially effectively at high temperatures, due to the narrowing at the top, the thrust increases significantly and the volume of exhaust air increases significantly. Despite the installed grid, the total energy efficiency of such a design will be significantly higher than with a simple installation of the battery near the wall.

The second, no less important point is the availability of the radiator and supply pipes. It's no secret that the battery is one of the potential sources of problems in an apartment. Any radiator can leak - there are many reasons for this, from water hammer to low-quality material. In addition, given the low quality of the coolant (water), it may be necessary to remove the battery in order to flush it - otherwise, the number of actively heating sections will constantly decrease. So from the point of view of plumbing, the best cover (panel) on the battery should provide free access to the radiator - either not have a permanent attachment, or be attached.

Advice! At the very least, it is necessary to put a "revision" (plastic door), which will give access to the place where the pipe is supplied to the radiator - as experience shows, this is the weakest point in the entire system.

How to close the battery - we are considering the options in the video:

Modern interiors delight the eye with exclusive design solutions, extraordinary design of space, and sometimes a classic combination of simplicity with functionality. In any case, engineering communications in their original form can only look good in loft-style rooms. In all the rest, pipes are an undesirable element and need to be masked.

Not only happy owners of elite housing are worried about how to hide the heating pipes in an apartment, but also everyone who is not indifferent to aesthetics. Openly laid communications usually look very unsightly, therefore, they cause a natural desire to decorate them or completely hide them. With a little imagination, you can use modern materials to give the elements of the heating system a unique decorative look.

Features of decorating pipes in a private house and apartment

There are most options on how to hide heating pipes in a private house. Internal communications of private buildings are in no way connected with neighboring ones and, accordingly, if necessary, can be laid and relocated as they please. If changes in the configuration of the heating system are planned in an apartment building, then it is necessary to take into account the interests of all residents and to agree with the operating organization.

Pipes can be completely hidden only during construction or major repairs. For this, a hidden gasket is used in the walls or in the floor. Insulated pipelines are placed in grooves and covered with mortar or hidden under moldings. In individual heating systems, floor heating can be arranged. In private houses, it is convenient to hide communications between the logs of wooden flooring. It remains only to cover the intersection of pipes with the floor with decorative overlays, as shown in the photo.

Most of the inconvenience to apartment residents is caused by trunk transit pipelines, which, due to their large size, are difficult to hide. In addition, overdoing it with shelter, you can lose some of the heat entering the room. To disguise them, only external decoration techniques are suitable.

On a note: decorating heating pipes in your home, you don't have to worry about changing their heat transfer. In individual systems, the heating of rooms will remain the same, only the ratio of the amount of heat coming from pipes and radiators will change. But in apartments with centralized heating, you have to save every kilocalorie of thermal energy and leave the pipelines as open as possible.

One way or another, any actions in relation to the elements of the heating system affect its functioning. Before taking drastic measures to move pipelines out of sight, you should study the complete scheme of the existing wiring and analyze the possible consequences.

Important! A hidden gasket can only be used if new high-quality pipes are used without threaded connections. All dismountable sections and fittings must remain accessible for service. This is especially important in apartments, where the occurrence of an emergency situation is fraught with flooding of neighbors.

In some cases, decorating open pipelines and radiators is the best option. This allows them to be made invisible at minimal cost, without violating the integrity of the walls and floor and without changing the configuration of the heating circuit. At the same time, all design parameters of the heating system are preserved and free access for ease of operation. When choosing how best to decorate a heating pipe in a room, one should be guided both by considerations of aesthetics and preservation of functionality.

5 ways to hide heating pipes

Open pipe laying does not mean a hopelessly damaged interior. Elements of the heating system can always be covered with frame structures, decorated with decorative elements or artistic painting. Of the whole variety of options, we will single out 5 main ways of hiding heating pipes in a private house or apartment:

1. Using a screen protector
2. Installation of the frame box
3. False wall construction
4. Decorating with scrap materials or plants
5. Coloring and patterning.

Let's consider each of them in detail.

Using a screen protector

The easiest way to hide heating pipes in an apartment, and sometimes in a private house. It is fast, relatively inexpensive and does not require the involvement of specialists; it is applicable even for pipes remote from the walls. It is enough to choose the model you like and fix it in the right place. Screens can be made of metal, wood, plastic, chipboard, MDF. There are many configurations in a wide variety of styles. The annoying screen can be easily replaced. If you wish and have the skills to work with wood materials, you can make them yourself.

Screens for radiators made of tempered glass or transparent acrylic deserve special attention. They are quite durable, easy to remove, easy to clean, and have a wide range of colors. If necessary, screens can be made in any size to order. It is possible to print pictures and photographs, apply various patterns. Stained-glass screens are also used, which look very impressive with backlighting. Such elements can enrich even the most sophisticated interiors.

Decorative screens can cover not only the batteries themselves, but also the pipes going to them. The main thing is to carry out the correct measurements and choose a model that is in the best harmony with the rest of the interior elements. The photo below shows the use of backlighting in combination with a textile braided screen.

Perforated panels and grilles are also used as screens for radiators, which are installed in the openings of frame structures. This option allows you to completely hide all elements of the heating system, but is applicable only if the batteries are located in niches or if a false wall is mounted at a considerable distance from the existing one. For ease of maintenance, the screens are removable.

Advice: by gluing a sheet of foil-insol behind the radiator, you can noticeably improve the heat transfer of the heater and increase the temperature in the room by a couple of degrees. This will compensate for the effect of the decorative screen, which prevents natural heat exchange and reduces heat gain by 5-15%, depending on the model.

Installation of frame boxes

This method allows you to close the risers and horizontal sections that violate the overall harmony of the interior. A frame of wooden beams or metal profiles is constructed around the pipes, which is sheathed with plasterboard sheets, PVC panels, plywood, OSB-boards, MDF or clapboard. The finished GKL box can be painted, wallpapered or lined with ceramic tiles. The decoration with decorative stone and the use of backlit stained-glass windows looks very impressive.

Thinking over the design of the box. it is recommended to provide removable parts or openings with inspection doors at the locations of threaded fittings, control and shut-off valves. It is convenient to use panels with latches or magnets. If necessary, the box can be turned into a household cabinet or bedside table. This is especially true in small bathrooms.

Important! It is possible to close pipes with a blind box only if they are new and hydraulic tests have already been carried out, confirming the reliability of the connections.

The dimensions of the box are taken based on the number and diameter of the pipes. In this case, it is necessary to leave gaps of several centimeters for free movement of communications under the influence of thermal expansion and for ease of maintenance. It is desirable to cover the pipelines themselves with thermal insulation. It is inexpensive, and will prevent heat leakage to unnecessary heating of the inner space of the box and the back wall.

False wall construction

If the heating pipes take up a lot of space in the room or there are other communications besides them, then it makes sense to consider such a shelter option as a false wall. It is mounted according to the same principle as the box, but it covers the entire wall, not just a part. Accordingly, it takes up more free space and reduces the area of ​​the room.

The main advantage of a false wall is the absence of even the slightest traces of communications. At the same time, there is no need for dirty work on wall chipping, the pipes are completely hidden without dust and unnecessary debris. If access to the piping is required for maintenance or repair, the wall can be partially disassembled and reassembled without too many problems. In order not to disassemble large areas, opposite pipes and especially their connections provide for the installation of small panels.

If a drywall frame wall is built to divide the space in the room, then it is just an ideal place to hide communications. There is always a free space of 50 to 100 mm between the sheets, which is quite enough for placing heating pipes. It is convenient to hide pipelines running under the ceiling behind suspended structures.

The main disadvantage of a false wall is the difficulty of detecting leaks in an accident. Therefore, high requirements are imposed on the quality of pipes and their installation. Old pipes definitely need to be replaced. The number of connections should be kept to a minimum. If you cannot do without joints, then preference should be given to welding or crimping. Threaded connections and valves remain open or located behind doors or removable panels.

Decorating with scrap materials

A good opportunity to hide pipes, while maintaining free access to them, is given by their disguise as vegetation or interior items. The most popular decorative materials are artificial flowers, twine, cord, rope, ribbons, fabric, buttons and stones. It is very convenient to use bamboo. It is easy enough to find a barrel of a suitable diameter. There are a lot of decor options, you can use any available materials that match the style of the room. Some of them are shown in the photo.

This way of hiding pipes gives you unlimited creativity. A riser wrapped with hemp rope looks good. With a little imagination, it can be easily turned into a tree trunk or branch. Disguise as a birch is often found. Convenient supports are obtained from horizontal pipes for hanging decorative items, curtains or shelves.

Coloring and patterning

All the methods of masking heating pipes described above reduce the flow of heat into the room to one degree or another. One of the best options for hiding the heating pipes in an apartment in order to preserve their heat transfer is painting and applying various drawings. Good results are obtained both by art painting and decoupage coated with heat-resistant varnish.

Provided that you do the work with your own hands, this method is the cheapest, since the metal elements of the heating system still need to be painted, and the paint consumption for patterns is insignificant. In the case of decoupage with napkins, the costs are generally minimal. At the same time, pipes and radiators turn from ugly objects that you want to hide into interior decoration.

Important! The paint must be applied to a cold circuit with the heating system turned off, otherwise, if it dries quickly, it may crack or simply lie in an uneven layer with spots and stripes.

In order to give the elements of the heating system a decorative look, painting is sometimes used even of plastic pipelines and heating devices already covered with a protective layer. A well-chosen color scheme can make pipes and radiators the main highlight of the interior, or it can help to harmoniously fit them into the atmosphere and make them invisible.

When choosing a paint, it is necessary to pay attention to such parameters as color scale, resistance to fading over time, gloss, ability to withstand high temperatures, good adhesion to the corresponding substrate. Environmental friendliness and smell are also important, since, while painting, you will have to breathe in vapors of paints and varnishes for quite a long time.

Advice: in no case should you save on the price of paints or brushes. After all, bold design solutions for successful implementation require the use of the highest quality materials.

The easiest way to hide heating pipes is to paint them to match the walls. Nevertheless, the time spent on artistic painting always pays off later with aesthetic pleasure from contemplating the resulting paintings.

An ordinary radiator can become a canvas for an artist's work. With the help of brushes and paints, skillful hands are able to turn a heater into a real work of art.

Conclusion

Modern pipelines have a long service life and allow concealed laying. Nevertheless, in some cases, the elements of the heating system are exposed and decorated. There are quite a few ways to mask pipes, the choice of the most suitable one depends on the characteristics of the room and the aesthetic taste of the owners.

If you have creativity and a willingness to take the time to decorate the heating pipes in the room, you can do it yourself. This will allow you to decorate the interior with minimal cost.

There are pipelines in every apartment. The modern interior presupposes the decoration of the premises with taste, so that everything is neat and stylish. Therefore, the question of how to close the heating pipes worries many owners. Today there are a number of ways that can be used to solve the problem of an unaesthetic appearance of heating structures. The article will discuss the most effective of them.

There is a large selection of heating systems on the market. To determine which pipes to use for heating a private house or apartment, it is necessary to consider the physical properties of the product, performance characteristics, installation and application conditions. There are pipes that look aesthetically pleasing and do not spoil the interior of the room, but are of low quality and low technical parameters. And there are reliable and durable options, but not very attractive in appearance. To create a stylish design, such pipes have to be hidden.

Deciding how to hide heating pipes in a private house is best at the construction stage. Then you can think over everything well and equip the system in such a way that the highways are not visible at all. Of course, there are options that can be applied after the completion of the construction of the house and the repair work. But it is still better to pay attention to this issue directly at the design stage of the structure.

The most commonly used options for hiding heating pipes in an apartment, private sector, are:

• closing the laid highways with decorative screens;
• masking pipes with a false wall made of gypsum plasterboard or a box;
• hiding under a raised floor;
• execution of the heating system wiring behind the false ceiling;
• brickwork of risers into the wall;
• use of decorative elements.

Pros and cons of methods for hiding heating pipes

To answer the question, how to close the heating pipes is best, you need to know that each of the options has positive and negative sides. It is necessary to choose one of the methods not only on the basis of decorative qualities, but also taking into account the technical characteristics of the highways, laying conditions and other local factors. It is worth dwelling in more detail on each of the options.

Decorative screens

Suitable for all types of pipes. Quite affordable way to hide the pipeline. If the risers are made of metal and lag behind the wall at a great distance, then the installation of screens is the best option, how to close the heating pipes in a private house or apartment. The choice of decorative screens is wide and presented in different shapes and colors. You can read more about the battery grilles. The advantages of this method include: quick and easy installation, the heat transfer of the riser is not disturbed.

Plasterboard and laminate structures

A decorative box to hide the pipeline can be made of laminate, drywall, polyvinyl chloride, MDF. Sometimes they also use parquet boards on a slatted frame. This option, how to close the heating pipes in the room with drywall, is the most popular. The use of this material makes it possible to create structures of any configuration. It is very simple to decorate a plasterboard structure: you can paste the wallpaper or paint it to match the walls of the room. Can be finished with tiles.

Many people choose such a method as to hide the heating pipes in a new building with a laminate, having built a box out of it. In this case, the structure turns out to be decorated like the floor. If, in addition to heating pipes, other communications pass in the house, it is best to hide them with the help of false walls from gypsum plasterboards.

The considered method has several disadvantages, for example:

But, formed as a result of the construction of a false wall, the niche can be used profitably. For example, laying a layer of insulation can be a good way to improve light and sound insulation. You can use such a place for a night light or place a stereo system. Using the niche with benefit, false wall equipment will be a fully justified option for hiding pipes for heating.

Covering highways in the wall, floor

This method of hiding the heating pipes in the floor screed or in the wall is not suitable for all highways.

For example, this method cannot be used for pipelines made of black steel, metal-plastic with compression fittings made of polypropylene. But for stainless lines and copper pipes, cross-linked polyethylene and metal-plastic on press connections, the option would be ideal. But you must first think carefully about all the subtleties of the layout of the wiring.

They have heating pipes in the wall, pros and cons that you need to know before choosing this method of masking the line. The main advantage of the method is that the design of the room will not be disturbed and overloaded with additional details. However, there are also disadvantages. For example, the complexity of installation. If the pipe leaks, you will have to destroy the wall to repair it.

Hiding pipes in the ceiling

Very often, the highways are located in the upper zone of the room and are closed with false ceilings. For a private house, this is a very practical option. But also quite expensive. It is important that the joints are of high quality and reliable. Otherwise, if the pipe breaks through, water can flood electrical appliances and residents of the house. Before hiding pipes behind a wall, in the floor or under the ceiling, you need to think carefully about everything. To strengthen the thread, tow or flax was previously used.

Today, new, more effective materials have appeared. For example, a reel for sanitary-type heating pipes. This is a great way to seal hot or cold water pipes. It must also be remembered that when the pipeline is heated or cooled, its length may change slightly. To reduce fluctuations in the length of the line, special devices are used - compensators for heating pipelines at home. They compensate for changes in length, which makes it possible to increase the service life of heating structures.

The use of decorative elements

Decorative sockets for heating pipes are an excellent option for hiding pipes.

The method is simple. The gap between the floor and the pipe is filled with an elastic sealant that can withstand high temperatures. And then they decorate it with a decorative rosette. Such elements are made of wood or plastic. Plastic sockets are available in a wide variety of shades. Wooden ones can be painted in any color, varnished or stained.

Thus, today there are many ways to hide heating pipes in a private house. It is advisable to close the highways at the stage of construction. But even after construction, you can decorate the pipes. Each of the methods has its advantages and disadvantages. And which one to give preference to depends on the type of pipeline, operating conditions and the chosen design of the room.

Agree, even the most original design solution for bathroom interior decoration can come to naught due to unattractive engineering communications. You can save the situation by skillfully masking unpresentable elements.

At the same time, it is not necessary to be a virtuoso in the construction business - it is enough to choose finishing and building materials, prepare tools and stock up on free time.

We will show you how to hide pipes in the bathroom, while providing access for system maintenance. After reviewing our instructions, you can independently transform the bathroom, saving money on plumbing services.

The first thing to do before you start sealing pipes in the bathroom is to decide on the right material.

When choosing a material for hiding pipes in a bathroom, it is not entirely correct to be guided exclusively by the aesthetic component of products.

Criteria to be guided by when choosing a material:

• Lightness... So that the structure does not clutter up the already limited space, it is necessary to select materials, for the fixation of which there is no need to construct heavy frames. You can use ordinary wooden slats or metal profiles.
• Moisture resistance... High humidity in the bathroom is common. The materials used in its arrangement will certainly be influenced by it. Therefore, preference should be given to those options that do not absorb moisture and do not deform when it settles on the surface.
• Sustainability to the effects of chemicals. It is quite problematic to maintain cleanliness in the bathroom without the use of household "chemicals". During general cleaning of the premises, all vertical and horizontal surfaces are subject to processing. Therefore, the materials used for their lining must painlessly tolerate direct contact with household cleaning agents.

Decorative MDF boards, plastic wall panels, sheets of moisture-resistant drywall are perfect for hiding communications in the bathroom.

In the cladding of wall structures, decorative hardboard slabs covered with a layer of melamine laminate and 3D gypsum panels will look interesting

Various textures of 3D gypsum panels popular in recent years are able to imitate wood, brick, mosaic and create fancy patterns on the walls.

An important point: regardless of the type of cladding material, before closing the pipes, you should make sure that they are reliable. Having closed a pipeline that has defects, there is a great risk that in the near future it will be necessary to disassemble the structure in an emergency manner.

Possible ways to disguise

There are many options that suggest how you can hide pipes in the bathroom. They differ in the form and purpose of the structure being erected, as well as the types of materials used. We propose to consider the most popular among them.

Image gallery

The steps of masking communications during the installation of a suspended toilet in a mixed bathroom will be presented by the following selection of photos:

Image gallery

If desired, the box can be completely removed to the level of the sink. Such a solution will make it possible not only to hide all unsightly communications, but also to provide additional space for storing bottles with household chemicals.

To cover the inspection hatch, it is convenient to use ready-made plastic doors, which are on sale in a wide range of colors and sizes.

Arrangement of an inspection hatch is a prerequisite if the decorated part of the pipeline is equipped with valves, meters or any other piece of equipment.

Masking pipes with tiles and mosaics looks appropriate in bathrooms, especially if they are made of the same material.

Method # 3. Closure with plastic panels

Decorative plastic panels are an easy-to-use and at the same time inexpensive option for hiding communications. A wide variety of types, colors and design options presented on the construction market allows you to create a structure that will harmoniously complement an already equipped interior.

Constructions made of plastic panels are also convenient in the sense that all their elements are interchangeable - this greatly simplifies the task if it is necessary to partially disassemble the structure

The only drawback of plastic panels is their low fire resistance. Although many manufacturers guarantee self-extinguishing of products, they are no less afraid of smoke than an open fire. Therefore, in the bathroom, the pipes of which are decorated with plastic panels, one must beware not only of fire, but also of ordinary smoking.

Installation of plastic panels is carried out on a pre-assembled frame, the basis for the manufacture of which are all the same metal profiles. Before sheathing the frame, first, the starting molding is attached to it with self-tapping screws.

Often, in the construction of a frame for fastening plastic panels, they prefer to use lumber. They are easier to cut and process than metal profiles:

Image gallery