How to make a globe out of paper with your own hands. Workshop on making a globe Sweep of the globe paper models

It is most convenient to visually study continents and water spaces with a model of the globe. However, not everyone has the opportunity to purchase a ready-made globe. Then you can feel like a creator and make a miniature planet yourself. Moreover, it can be made in several ways. Consider how to make a globe out of paper with your own hands.

Preparatory stage

Cover the table on which you are going to tinker with newspapers, unnecessary papers or special oilcloth. Prepare all the necessary materials so that you do not get distracted in the process by looking for them.

You will need:

pots;
glass containers;
spoon;
water - five glasses;
flour - one cup;
newspapers or consumer paper;
balloon;
primer;
brushes;
paints (acrylic or gouache, diluted with PVA glue);
scissors;
hot glue;
toilet paper roll;
plastic plate (cake stand).

A globe needs a base. Therefore, you need to figure out how to make a paper ball with your own hands. Ideally, you need a round balloon. Choose the diameter with which you want to make the globe. Inflate the balloon and tie tightly. Place it on a glass or any other convenient container that can serve as a stand. If you want to make the most realistic model of the planet, then try to achieve a slightly flattened shape. If you only find a standard oval balloon, just inflate it lightly.

Cook the paste

Before making a globe with your own hands out of paper, you need to prepare a binding solution - a paste. Pour four glasses of water into a saucepan and put on fire to boil. Meanwhile, in another bowl, knead the flour with the rest of the liquid. As soon as the water boils, gradually add the resulting mixture into it, stirring constantly.

Reduce the heat to a minimum and cook for a couple of minutes. Do not stop stirring, otherwise it will burn. The finished paste can be put in a cool place so that it cools down faster.

How to make a paper ball with your own hands

Tear the newspaper with your hands into small strips or squares. Lubricate the balloon with oil or petroleum jelly. Place a pot of binder in front of you. Dip the newspaper pieces into the paste and apply to the ball. So make some layers. Do not forget to leave a small hole through which you will then take out the ball. Cover the remaining paste with a tight lid or plastic bag. Leave the workpiece to dry for a day.

Warm up the adhesive mixture and repeat the whole process. That is, wrap the ball with pieces of paper and let dry. In principle, you can stop at this stage. But the more layers of paper, the stronger the ball will be.

We are already approaching how to make a globe with our own hands. We did not make a completely closed blank out of paper, but with a small hole. Pierce a balloon through it or untie the tip and deflate. Do not let go of the tail, keep it with your fingers. Remove the balloon. The result is a hollow papier-mâché blank in the shape of a ball.

We paint and create continents

Cover the future globe with a primer and let it dry. Now paint the ball blue. This is how we simulate the oceans and seas. Freehand or using stencils, draw the continents with a pencil. Paint them in green, brown, yellow and white based on a real mockup. If desired, sign the names of continents, bodies of water, islands, and so on. Now it remains to make a stand to make a desktop globe. But first, let's look at how else you can make a map of the world.

Other options for creating continents

We paint the globe blue. We cut out the finished continents from paper and glue it to the ball. The map can be left white so that during the learning process, the child himself painted the continents and bodies of water in the desired colors. Or you can completely cover the globe with blue paper, and then apply the continents.

The easiest way is to transfer a ready-made world map. Some craftsmen process the image in a graphics editor: enlarge, stretch, and then print and paste. And you can do even easier - take as a basis a ready-made model of a globe made of paper. For example, you can use the image above and resize it to fit.

Globe stand

Take a toilet paper roll, cut one side and fold it back. Apply hot glue to these and attach to the middle of the plastic plate. You can use the bottom of a round cake box instead. Expand the hole in the globe if necessary. Insert the other side of the sleeve, previously greased with glue, into it. The desktop globe is ready. If the papier-mâché blank is quite weighty, then weight the stand with plaster of paris or use a container with sufficient weight instead of a plate.

How else to make the base for the globe

Simply crumple up the newspapers and wrap the paper in several layers until you get something that looks like a ball. The method is simple and quick, but not neat.
Buy a pre-made foam blank.
Use Christmas balls if you want to make a small globe.

Take a volleyball, soccer, gymnastic or other ball of a suitable diameter as a basis. You can immediately draw or stick continents on them. And you can use them as a form for papier-mâché. Only the piece of paper will have to be cut to remove the ball. But you can attach loops to the halves and turn the model of the planet into a box.

Now you know how to make a paper globe with your own hands. Try to make it with your children, they will definitely enjoy this fun process.

It is most convenient to visually study the continents and bodies of water with a model. However, not everyone has the opportunity to purchase a ready-made globe. Then you can feel like a creator and make a miniature planet yourself. Moreover, it can be made in several ways. Consider how to make a globe out of paper with your own hands.

Preparatory stage

You will need:

pots;
glass containers;
spoon;
water - five glasses;
flour - one cup;
newspapers or consumer paper;
balloon;
primer;
brushes;
paints (acrylic or gouache, diluted with PVA glue);
scissors;
hot glue;
toilet paper roll;
plastic plate (cake stand).

A globe needs a base. Therefore, you need to figure it out, Ideally, you need a round balloon. Choose the diameter with which you want to make the globe. Inflate the balloon and tie tightly. Place it on a glass or any other convenient container that can serve as a stand. If you want to make the most realistic model of the planet, then try to achieve a slightly flattened shape. If you only find a standard oval balloon, just inflate it lightly.

Cook the paste

Reduce the heat to a minimum and cook for a couple of minutes. Do not stop stirring, otherwise it will burn. The finished paste can be put in a cool place so that it cools down faster.

do it yourself

Tear the newspaper with your hands into small strips or squares. grease with oil or petroleum jelly. Place a pot of binder in front of you. Dip the newspaper pieces into the paste and apply to the ball. So make some layers. Do not forget to leave a small hole through which you will then take out the ball. Cover the remaining paste with a tight lid or plastic bag. Leave the workpiece to dry for a day.

We are already approaching how to make From paper we did not make a completely closed workpiece, but with a small hole. Pierce a balloon through it or untie the tip and deflate. Do not let go of the tail, keep it with your fingers. Remove the balloon. The result is a hollow papier-mâché blank in the shape of a ball.

We paint and create continents

Other options for creating continents

Globe stand

How else to make the base for the globe

Simply crumple up the newspapers and wrap the paper in several layers until you get something that looks like a ball. The method is simple and quick, but not neat.
Buy a pre-made foam blank.
Use Christmas balls if you want to make a small globe.

Now you know how to make a paper globe with your own hands. Try to make it with your children, they will definitely enjoy this fun process.

Perhaps such an original paper globe can be useful not only for schoolchildren to teach them geography, but also for decorating the interior with unusual paper crafts, it is ideal. And the main thing is that you can make it yourself from paper by simply downloading the globe diagram.

And such an interesting craft - a paper globe was developed by a designer from France Joachim Robert and laid out for general use. Now anyone can download the diagram of this globe, print it on paper, cut it out and assemble it according to the diagram. And how to make such a globe out of paper, we will show in today's post.

How to make a paper globe

First and print it on a printer. By the way, you can print it on colored paper for printers - make a craft of any color.

Then we take and cut everything along the lines. And in order to better bend the details, the author makes a scoring with an ordinary ballpoint pen along a ruler at the folds. That is, he simply presses the pen along the ruler at the folds - thereby forming a groove along which it will be easier to evenly bend the paper.

The entire map on the globe is attached by an internal frame. Octagonal parts with three horizontal lines need to be cut, cut into the bottom of the hole along the inner three lines and bend in half along the dotted line.

Cut out the remaining three octagons, cut through all the lines along the perimeter. And then we connect all the parts into the made slots as shown in the figure. We connect all folded octagons with three, placing the largest one in the center and the smaller ones on the sides, filling the entire perimeter.

Then just insert the details with the map into the folded parts of the octagons as shown in the photo.

Collect carefully in accordance with the terrain, although there are all identification marks on the diagram - pay attention to them.

Master Class. Designing from paper "Globe" for children of the preparatory group with OHP.

Nomokonova Svetlana Anatolyevna teacher of MBDOU "Kindergarten No. 197", Barnaul
Target: Develop children's interest in designing from strips of paper. To teach to convey in the work the characteristic features of the model of the globe - the globe. To consolidate the ability to properly use scissors, glue stick. To develop the fine motor skills of children, accuracy in work. Expand the vocabulary of children.
Material for the lesson: Globe, blanks from colored paper, scissors, glue, plasticine, cardboard, wooden skewer.

Progress:

They bought me a small globe as a gift
A motley ball rotates on the leg.
The seas, the oceans are blue
And different countries are like colored spots:
Italy, France, Cuba, China,
Some (you will die with laughter!) U-swear-wai ...
I studied the names of countries for a long time,
And in the evening he said to mom and dad:
“I want to go around the whole world as soon as possible,
Buy a ticket for the morning train. "
I invite children to consider the globe, its features.
To make a globe you need:
- blanks from colored paper: blue, yellow and white;
- scissors;
- glue;
- plasticine;
- cardboard square 7x7;
- wooden skewer

Cut the blue strip of paper into 4 strips 1 centimeter wide and glue the snowflake,

then glue the ball is a globe,

we pierce our ball with a skewer and set it on the axis

cut out a circle from a square of cardboard - this is a stand for a globe
we install the globe on a stand with the help of plasticine; cut out continents and islands from white and orange paper

glue them onto the resulting globe.

Our Globe craft is complete.

The word globe comes from the Latin globus, which means "ball". For modern people, of course, it is no secret that the earth has a spherical shape. But it was not always so. The history of the origin of the model of our planet and how to make a globe out of plasticine with your own hands will be described in this article.

Globe history

Back in the 3rd century BC, ancient Greek scientists established that the earth has a spherical shape. The first globe is mentioned in history around 150 BC. Its creator was Cratet Mallsky. His model was depicted as a single continent, lined with rivers. The oldest surviving globe is considered to be the globe of the German cartographer Martin Beheim. He made his model by stretching calfskin over metal ribs.

Of course, the New World had not yet been discovered in 1492, so it was not on the Benheim world map. They were based on the maps of Ptolemy. Taking this model as a basis, in the future, cartographers made changes associated with new geographical discoveries. After that, the globes spread throughout Europe. They were given to dignitaries and even monarchs. Actually, in our country, the globe appeared as a gift to Alexei Mikhailovich Romanov from the Dutch ambassadors. Later this globe passed to Peter the Great. Today the globe is considered a symbol of enlightenment.

Citrus variant

Try to make a model of the globe out of plasticine with your child. Why plasticine? This material is ideal for making children's crafts. It is very plastic, it is convenient and safe for them to work. Sculpting helps to train fine motor skills of the hands, which contributes to the formation of speech, because the speech center and the center responsible for coordinating the fingers are located in the brain next door. Thanks to sculpting, attention and memory are trained, and making crafts close to real models helps to better understand the essence of things. And of course, imagination develops and the child's creative potential is realized.

In creating a globe with your own hands, the master class provided below with a photo will help you.

So, to make a three-dimensional model of the globe, you will need:

Grapefruit or large orange;
Ball pen;
Plasticine of various colors;
Stack;
A real globe.

Prepare the base by thoroughly washing and drying the fruit. Using a ballpoint pen, trace the contours of the continents to the orange. This can be done by attaching tracing paper to a real globe and redrawing the outline of the land on it. Then cut out the pattern and circle it with a pen on the orange. Or you can draw continents from the globe by eye.

Most of the globe is occupied by oceans. It is with them that you need to start making the model. Next, mark the continents in green.

Do not forget that Antarctica and Greenland are covered with snow, they will be white.

You can now apply hills. Looking at the actual card, apply yellow plasticine where necessary.

The next color to be applied is orange. Remember to check the map.

Mark the highest places on the globe in brown.

Add deep ocean spots with dark blue plasticine.

See how bright and beautiful the globe is.

On a stand

The next master class is perfect for children.

To make a globe on a stand, you only need plasticine and a real globe. It is necessary to correctly position the continents and mountains in the vast expanses of the oceans of our planet.

Make a large ball out of blue plasticine.

Draw the poles using white plasticine.

Then, after carefully looking at the map of the world, make cakes from green plasticine and, using a stack, give them the shape of the continents of the Eastern Hemisphere - Eurasia, Africa and Australia. Don't forget to add Madagascar Island.

Place them in the right places of the layout, focusing on a real globe.

Moving on to the Western Hemisphere. North and South America are located there. Form them out of plasticine and place them on the model.

Now we need to add deserts and mountains to the globe. Make them with orange and brown plasticine.

To make a footboard, make a ball and flatten it. The second part can be made by forming a plasticine roller. Flatten it slightly and bend it into a crescent shape. Place the globe on a stand. The craft is ready.

On a stick

For another option for making a globe, see the next master class.

To make such a model of the Earth, you will need:

Plastic or foam ball;
Thick wooden skewer;
A glass of sour cream;
Plasticine;
Colored paper;
Buckwheat and semolina;
A real globe.

At the base of the ball, you need to make a hole and connect it with a wooden skewer using plasticine. The lower part of the skewer must also be reinforced in a glass with the help of plasticine. The side walls of the cup can be pasted over with colored paper or painted with acrylic paint. Apply the blue plasticine to the ball in an even layer. Cover the wooden stick and the bottom of the glass with white plasticine. Using a real model of the Earth, make continents out of rolled green plasticine. To do this, you can use their patterns. Use yellow and brown plasticine to mark the hills and mountains. Sprinkle the locations of the glaciers with semolina, and inlay the places where the highest mountains are located with grains of buckwheat. The globe on a stick is ready!