DIY tennis table drawings and diagrams. How to make a tennis table with your own hands: sequence of work How to make a tennis table with your own hands

Many people like to play table tennis. However, often the dimensions of the tennis table do not meet the standards. Often these are homemade amateur tables made from scrap materials. In the early days of tennis in England, it was played on the floor. Then, for convenience, they began to set up tables. Their size did not matter then. It was only when the game became so popular in 1945 that it was recognized as a sport that standard dimensions for the playing area were established. The name “ping pong” is fixed - these are the sounds that the ball makes during the game.

Many people like to play table tennis. However, often the dimensions of the tennis table do not meet the standards

Depending on the level of players’ training and location, tables can be:

professional;
training;
amateur;
all-weather.

International standard: length 274 cm, width 152.5 cm, height 76 cm, there is a white line marking along the outer edges, and it also runs across the center where the net will be located; When playing doubles, each part of the table is divided in half by a 3 cm line.

If you want to play outdoors, such as on a picnic, then you can make or buy a mini ping pong table. Its dimensions are: height 65 cm, width 61 cm, length 110 cm. Thanks to such small dimensions, it is quite light in weight and easy to transport. Such tables are often folding and have an adjustable height for the convenience of children.

The most common at home are amateur ones. Most countertops are made of fiberboard, melamine, chipboard, MDF or plywood. This material is not resistant to moisture, so such tables cannot be made stationary for the street. They are mainly intended for indoor or outdoor play in good, clear weather. Often they make such a table tennis table with their own hands.

The standard or medium option (181cmx105cmx76cm) can be selected as the size. This is an excellent option for cottages, houses, offices, schools and other places where fans of this game gather. However, it is not suitable for professional competitions.

Professional ones are distinguished by high quality workmanship, have a tabletop thickness of 23-28 mm, are equipped with wheels for ease of movement and are heavy.

All-weather tables include tables that are made of material that is resistant to changes in temperature and moisture. It can be plastic, concrete, iron, etc.

How to make a transformable tennis table for a summer house (video)

How to make a table yourself?

Since their cost in stores is quite high, many are interested in how to make a tennis table with their own hands. There is nothing complicated about it! The main thing is to purchase material for the countertop, and everything else can be done from improvised materials. For this you will need:

blueprints;
plywood, chipboard, LMDF or any other smooth and thick material for the countertop;
self-tapping screws;
brackets for attaching the base to the tabletop;
fastenings for table legs;
bolts for fastening the legs;
edged timber or other material for legs;
putty;
dye;
wood antiseptic;
hacksaw or jigsaw;
drill.

The size of the table tennis table depends on where it will be installed. Don't forget that you need enough free space for players to move around. Only the height can remain unchanged. The length and width can be slightly changed based on the size of the room where it will stand. If space allows, choose standard.

The most common at home are amateur

If you plan to make the table folding, then you will need to make it from 2 halves. If stationary, you can purchase a whole sheet.

The ideal option for the countertop would be laminated chipboard or LMDF. They have a very flat and smooth surface and do not require additional processing.

And you can choose the desired surface color, order cutting and trimming on site. The tabletop material must be polished, otherwise the ball will change its flight path when it hits the surface.

The base can be either metal or wood. The last option is easier to do, and it will greatly facilitate the design. Mark the bars so that there are equal spaces on opposite sides of the tabletop. Screw them to each other using self-tapping screws and brackets. Be sure to first measure how long the screws are needed. Otherwise, you risk damaging the playing surface by drilling holes in the table.

The size of the table tennis table depends on where it will be installed

Then screw the leg mounts to the base. For this purpose, 30 mm x 50 mm bars will be sufficient. The legs themselves are secured with bolts. In total you will need 6 legs: 2 on each edge and 2 in the center. Assemble the table and check that everything is connected correctly. After you are convinced of its reliability, proceed to treating the wood with an antiseptic and painting it. If necessary, smooth out any unevenness or chips with putty.

The choice of a tennis table and accessories is justified by the operating conditions, needs and level of professionalism of future competition participants.

Types of tennis tables

Classification by area of use

Indoor tennis tables are a popular option for offices, sanatoriums, educational institutions and sports competitions. When used outdoors, they quickly deteriorate, as they are not designed for high humidity and temperature changes.

Outdoor tennis tables are divided into the following categories:

Moisture-resistant tennis tables. The material is plywood, which is secured with formaldehyde glue. It tolerates precipitation, fog and summer dew well.
All-weather tennis tables. The tabletop is made of plastic or melamine, often with an aluminum layer. The materials are designed to withstand precipitation, wind and bright sun.
Anti-vandal tennis tables. The monolithic version does not fold and cannot be transported.

Mounted on a platform, with a tabletop made of steel, melamine or aluminum, it is protected from damage that can result from adverse weather and mechanical stress.

Classification by player level

Amateur tennis tables. They are characterized by a small tabletop thickness, a weight of up to 70 kg, a convenient folding and transportation system, and the presence of a mesh.
Advanced models. Such models are characterized by a thicker tabletop, the weight increases to 100 kg. They are equipped with a holder for balls and rackets and an additional net.
Professional tennis tables. They have the largest tabletop thickness and weight up to 200 kg. The equipment must undergo ITTF certification.

For strength, the design includes metal fasteners, the wheels are equipped with locks, and the height is adjustable.

The presence of an ITTF certificate indicates that the table complies with the requirements of the International Table Tennis Federation.

Characteristics of tennis tables

Tennis tables are varied: the material and thickness of the table top, design and equipment vary. But a number of requirements apply to all models:

dimensions 2.74 x 1.525 x 0.76 m,
matte surface with uniform ball rebound;
the presence of a white border around the edges;
the presence of a thin dividing line on each half of the playing field.

Other parameters depend on the nature of use and the purpose for which the product is purchased.

Chipboard. The material is used in the manufacture of tables for playing in the hall. As the thickness of the tabletop increases, the rebound indicator improves.
Chipboard. It is a chipboard covered with a special cladding. Due to the protective film, the material becomes durable and moisture resistant.
MDF. Unlike laminated chipboard, it is an environmentally friendly material, but has a lower density. Otherwise the characteristics are similar.
Solid wood. Eco-friendly and expensive material: durable and with a uniform surface.
Plastic. Used in the manufacture of amateur models. It is distinguished by its low weight and low price.
Moisture resistant plywood. Countertops made from this material are considered the best among other options for hobbyists. Suitable for outdoor and indoor use.
Melamine. The tabletops are thin and resistant to weather conditions.
Aluminum. It is used outdoors, and its characteristics are not inferior to semi-professional indoor tables.

The tabletop of a tennis table can be:

with one-sided folding;
with full folding;
with height adjustment;
with fixed height;
with transport rollers;
with a mesh fixed by the manufacturer, which cannot be replaced;
with anti-reflective coating;
with holders for balls and rackets.

A separate indicator of quality is the thickness of the tabletop. The larger it is, the better the speed and rebound characteristics of the selected equipment will be.

Less than 10 mm. This thickness is typical for melamine and is used for amateur models.
11-15 mm. These parameters correspond to amateur indoor tables made from chipboard, laminated chipboard or MFD.
16-20 mm. Amateur and semi-professional models fall into this category: increasing the thickness of the table top improves the ball's rebound and the quality of the game.
More than 20 mm. 22 mm is the semi-professional type, and 25, 28 and 30 mm are the parameters of professional options.

When choosing ping pong equipment, pay attention to the selection of accessories: rackets, balls and nets.

Tennis table nets:

They come in synthetic, cotton and metal. Synthetics and metal are suitable for public places; cotton is appropriate for the home model. Metal mesh is less susceptible to deformation and weather.
Standard parameters 183x15.25 cm.
The tension of the mesh is regulated by a cord located in the upper part. If the mesh is removable, then it is equipped with fastenings with clips or screws.
The rules do not stipulate color, except for a white edge 1.5 cm wide. It is considered mandatory.
When purchasing a table, a net may be included, with the exception of professional models that are not equipped with a net.

Table tennis rackets are divided into three groups:

For newbies. The speed and torsion values reach 50, the control is 100 percent.
Advanced. Torsion and speed increase to 70, control decreases to 90%.
Professional. Torsion and speed indicators are 100, control - 90%.

When choosing table tennis balls, pay attention to the number of stars on the packaging:

Cheap and simple ones have one star. They are short-lived due to the poor quality of the material and rough seams.
High-quality balls are rated two to three stars.
Balls for professional sports are ITTF certified: their strength is the highest.

pros

Tennis tables have the following advantages:

They are distinguished by the uniform rebound of the ball from the playing surface: this gives the player the opportunity to predict the trajectory and direction and calculate the force of the impact.
The designs are convenient for transportation and storage.
Outdoor options tolerate moisture, cold, heat and sunlight well, while indoor samples are protected from glare.

The following nuances are characteristic of outdoor all-weather tables:

The material of the tabletop makes it resistant to weather conditions, the playing surface does not bubble from moisture and does not fade in the sun.
Metal edging guarantees durability.
The anti-reflective coating is applied in such a way that it becomes possible to play in conditions of excessive and uneven lighting.

Anti-vandal tables are securely reinforced, constructed of durable materials, and equipped with a metal mesh.

The advantages of professional tables include:

Quality workmanship that guarantees durability and long-lasting playability.
Ergonomic design: installation and dismantling require a minimum of time and effort, even with a large weight of the product.
Playing qualities: professional options lead in game speed and ball rebound force.

Advanced or semi-professional equipment is convenient for training athletes. Amateur models are budget-friendly, lightweight and compact when assembled.

The advantages of folding systems are as follows:

One-sided folding makes it possible to train without an opponent.
Full folding is designed for regular transportation and convenient storage.

Minuses

Inconveniences are caused by the lack of transport rollers on the table, a thin tabletop and materials that cannot ensure a uniform rebound.

This drawback is found in outdoor products: melamine countertops are inferior in performance to chipboard, and metal edging disrupts the uniformity of rebound.

Operational problems arise in the following cases:

there is no anti-reflective coating on the surface;
the rollers are made of insufficiently strong material and cannot withstand weight;
The tabletop material is fragile;
the surface is uneven, damaged or deformed.

How to choose a tennis table

When choosing a tennis table, decide for yourself:

Whether it is intended for outdoor or indoor play.
Whether you need equipment for professional competitions, training athletes or friendly matches with friends.
What sizes do you think are suitable? If children will take part in the game, height adjustment is necessary.

One of the parameters is the design of the folding system. Professional competition models are not designed to be disassembled.

It takes a long time, and it is easy to scratch the countertop in the process. Products for training and amateur competitions require one or two people to assemble and transport.

It is important to pay attention to the following points:

how many people are required for assembly;
is the model equipped with a security system (fixation);
Is it compact when assembled?
does the assembly cause damage to the coating;
How long does folding and unfolding take?

Preferred tabletop colors are blue and green, with white markings. Gray and brown finishes are acceptable for all-weather tables. There should be no glare on the surface - matte paints and varnishes are more often used.

Durability depends on the material and workmanship:

Chipboard and laminated chipboard are soft materials that are exposed to moisture and deform.
The MDF tabletop is denser and more resistant to damage. Installed on a metal profile, it lasts for decades.
With proper care, outdoor equipment with a melamine or aluminum top can last up to fifty years.
Surfaces made of plywood and plastic are not as durable.

The weight of the table depends on the category to which it belongs:

amateur – from 55 to 70 kg,
advanced – up to 110 kg,
professional – up to 160 kg,
professional models for competitions – up to 230 kg;
all-weather options - from 40 to 100 kg.

Professional tables are usually not equipped with a net, and the nets that the manufacturer installs on amateur tables are short-lived and cannot be adjusted in height or tension. Any color convenient for players is acceptable.

Wheel strength is an important parameter for heavy models. It depends on the material, number and size of rollers. Please check it separately for each model under consideration.

The consultant must provide information about price and characteristics, answer questions about operation, care, advantages and features; If necessary, provide a comparative description.

When deciding which equipment is better, you should pay attention to:

material;
gaming characteristics;
ITTF certificate;
other certificates and awards;
product compliance with quality standards;
tabletop thickness;
design and parameters.

Professional tables that are ITTF certified have the best characteristics among indoor equipment:

The weight reaches up to 200 kg, but they are equipped with convenient assembly systems and strong rollers (except those that are manufactured directly for professional competitions).
The design is stable and safe.
The fasteners are made of metal.
The height of the legs is adjustable.
Each half of the table is fixed in a vertical position at different angles: this makes it possible to train without a partner.

Only blue and green colored surfaces are allowed.
The tabletop thickness is 25, 28 or 30 mm.
The table top is made of chipboard, laminated chipboard or MDF, complemented by an anti-reflective coating and reinforced with a metal frame and edging.
Professional tables are designed for indoor use only; due to moisture and temperature changes, the surface becomes deformed and loses quality.

When choosing equipment for playing tennis outdoors, follow these other recommendations:

The material of the tabletop and frame must be durable and resistant to climate change.
Versatile all-weather options. Moisture-resistant models tolerate rain and dew, but suffer from wind and temperature.
If you are planning a long-term installation in a crowded place, pay attention to vandal-proof tables. They do not fold and are not transported; they are additionally reinforced and equipped with a metal mesh.

Each model is created either for indoor use or for outdoor installation. Indoor equipment deforms when exposed to moisture, sun and temperature. Wear and tear reduces playing quality and is dangerous.

The moment of assembly and dismantling is one of the most important in operation. Instructions are included with each product. Compliance with it will save time and protect players from injury, and parts from damage. Caution is also necessary during transportation.

Tennis tables are not suitable for other purposes (unless the instructions provide for transformation into a picnic or lunch table).

They are designed for play by two or four participants or for independent training. They cannot be used for sitting, lying or storing objects. The structure may not support the weight.

If the rollers are not equipped with a special braking system, the model can only be installed on flat surfaces: where spontaneous movement and sliding will not occur.

To prevent injury and equipment damage, inspect fasteners, screws, and clips. They need to be tightened and secured as necessary.

Another important point is caring for the surface of the countertop. It ensures proper play, so you want to prevent scratches, scuffs and discoloration.

Wipe it with a soft sponge without detergents: standard powders and gels leave marks and damage. There are special surface care products - they will not harm the coating.

The manufacturing company provides a guarantee for the product only if the buyer followed the rules of operation and storage. The terms vary from six months to several years. A common option is a one-year and three-year warranty period.

The product warranty means free repairs at the manufacturer’s service center throughout the entire warranty period. Upon purchase, a warranty card with the date and stamp of the store is issued, this is the basis for providing repair services.

The buyer is given the opportunity to:

return goods whose quality does not correspond to the declared one within the first 15 days after purchase;
exchange the product for a similar one;
receive warranty repairs during the warranty period;
return the goods of proper quality within the first 14 days after purchase, if the appearance is not damaged, the packaging and documents are preserved.

The presence of a defect is determined by a service center expert. The defective model is replaced with a working similar one. If the buyer does not want to exchange the product, the purchase amount will be returned.

If the package is damaged (a part is missing), then the seller is obliged to provide the missing elements within three days.

Damage assessment during the warranty period is carried out at the service center. If it is determined that the damage was not caused by violation of the rules of operation and storage, the manufacturer will repair the product free of charge.

The warranty does not apply to the following situations:

if the product serial number has been changed, removed or damaged;
if a piece of equipment or an individual part is replaced with non-original components;
if the manufacturer has changed the design;
if the cause of the breakdown is improper operation.

Malfunctions and repairs

Self-repair of professional equipment is not recommended: if it was carried out during the warranty period and then contacted the service center, specialists will refuse warranty repairs.

Actions you can do yourself:

replacing the mesh on models that provide this action;
care of the playing surface, maintaining cleanliness;
installation and dismantling of the structure according to the instructions;
monitoring the condition of the mesh fasteners - if necessary, they are tightened.

Other actions involve risks, may damage the quality of the equipment and further cause injury to the player.

Do-it-yourself repairs are usually carried out when the warranty period expires, or if there was no warranty in the first place. Home repairs include amateur-grade and outdoor options that have been damaged by weather.

Frequent breakdowns include damage to plastic clamps and fasteners, abrasions, cracks and bubbles on the playing surface.

The equipment may become unstable. If you purchased a table without an anti-reflective coating, you can cover it with a special varnish or paint yourself.

The faulty fastener or retainer is replaced with a new one. Spare parts are purchased from the manufacturer or manufactured by analogy with the damaged ones. The scratched rough surface must be evenly covered with putty, dried, painted and varnished.

To eliminate glare, varnishes and paints are used: uniform application is important. If you apply the paint unevenly, the ball's bounce rate will suffer.

Manufacturers of tennis tables

Cornilleau. This is a French company that specializes in table tennis products. Manufactures products in France, Germany and Russia. Organizes the production of both amateur and professional models.

Prices range from 12 to 250 thousand rubles. The warranty for amateur models is 6 months, for professional models – three years.

Donic. The company's head office is located in Germany. Donic produces sports equipment, clothing and accessories for table tennis. Prices from 20.5 to 100 thousand rubles.

Donic products are used at world championships. In addition to professional equipment, products for amateurs are produced. A warranty of up to 5 years is provided.

. This is a popular company in the Asian table tennis market. It is distinguished by quality and budget products. The price of a tennis table is 7.5 – 40 thousand rubles. Warranty period – 1 year.

Kettler. Another German company. Engaged in the production of exercise equipment and sports equipment. The products comply with European safety standards. Service centers are located in all major cities of Russia.

Warranty up to 5 years, price range from 15-100 thousand rubles. The company also produces, etc., accessories for fitness, home sports and competitions.

Sponeta. A company from Germany deals exclusively with ping pong products. The models are distinguished by their low price: such a table costs from 7 to 45 thousand rubles. The range includes products for both amateurs and professionals.
This is a Russian manufacturer of table tennis equipment: the range includes tables, accessories and equipment for playing games. The products have a Certificate of Quality Conformity from Rosstandart.

Simple models cost 3.5 thousand rubles, professional ones for tournaments cost 45-47, and outdoor anti-vandal equipment will cost about 50 thousand rubles. Warranty from 6 months.

Stiga. One of the largest table tennis manufacturing companies in the world. Products include equipment, apparel, balls, racquet blades and rubbers, nets and competition products.

Production is located in Germany and Sweden. Manufacturer's warranty up to 5 years. Prices from 8 to 140 thousand rubles.

Sunflex. This is a German manufacturer of high-quality tennis equipment. The warranty on tennis tables is 1 year. Prices from 10 to 70 thousand rubles. Sunflex models are distinguished by affordable prices and reliable German assembly.

Reading time ≈ 9 minutes

If you are a fan of table tennis and have enough space on your property, you can make a tennis table with your own hands using drawings with dimensions and photos. After all, you will have to pay a considerable amount for a product from a sports store, while a homemade design will be many times cheaper, without being inferior in quality. A self-made table is ideal for home tennis tournaments and active recreation with loved ones. That's why we've prepared a series of master classes for you with simple and clear instructions for creating structures that you can make over the course of a weekend.

Homemade tennis table.

General characteristics

If we consider the classic version of the ping pong table, it has the following dimensions:

length 2.74 m;
width 1.525 m;
height 0.76 m;
mesh height 15.25 cm;
the mesh protrusion on the sides is 15.25 cm.

One of the most basic indicators of the quality of a table is the rebound of the ball from the playing surface (English: Rebound Factor). The ideal rebound is measured in this way: from a height of 30 cm, the ball is released without effort, and for the first time it should bounce to a height within 25-30 cm. This indicator should be the same over the entire area of the tabletop.

Parameters of a classic tennis table.

Why is this factor so important? The quality of the ping-pong game will depend on the rebound of the ball. With a small rebound, the game will become too slow, sluggish, and will lose all excitement and passion. The ball's bounce rate is directly related to the characteristics of the tabletop - the material and its thickness.

Thickness and color

The thickness can vary between 12-28 mm for tables with different purposes (outdoor or indoor), but in any case, the playing surface must provide a standard ball bounce.

Gaming tables also necessarily have markings - there is a white border 2 cm wide along the edge, and a dividing longitudinal strip 3 mm wide is strictly in the center.

The surface color can be blue and green, and amateur models also use brown and gray. Interestingly, the shade of the playing surface can influence the nature of the game:

blue color promotes excitement;
and green - for proven tactical decisions.

The surface can also be glossy or matte. It is recommended to use a matte surface - there is no glare on it, so it is much easier to track the ball and play effectively.

All tennis tables can be divided into the following groups:

Professional. The thickness of the table top for such models is 22-28 mm, the weight can reach 140 kg. The table is highly stable and provides the best playing conditions.
Amateur. The tabletop is somewhat thinner - 16-19 mm; MDF or chipboard is often used to make the playing surface, intended for indoor use.
All-weather. As the name suggests, the product can be placed both outdoors and indoors. To ensure resistance to water, temperature changes and UV rays, the surface is made of plastic and coated with special protective compounds. All-weather models are lighter in weight (up to 70 kg) and can be collapsible or stationary. The thickness of the tabletop is within 12-20 mm.

Folding tennis table.

The folding design has several significant advantages - firstly, saving space for storage, and secondly, the ability to play alone by fixing the other half of the tabletop vertically.

You can make a tennis table with excellent characteristics with your own hands if you use competent instructions, drawings with measurements and photos. We offer you several design options for different conditions.

Materials

To make a table at home, you will need to prepare some materials. You may already be able to find some in the garage, but the rest will have to be purchased.

Wood-based materials are best suited for making countertops:

Chipboard. The classic dimensions of chipboard sheets (2.75 * 1.75 m) mean that they will have to be minimally adjusted to fit the standard dimensions of the playing surface. In fact, this is a ready-made countertop. You can also purchase laminated sheets already painted in blue/green, order customization and end processing. A solid chipboard tabletop is a great option if you want to make a stationary table.
Plywood. Standard sheet sizes with a width of 1.525 m are ideal for countertops. You will need 2 sheets that need to be filed on one side - that is, the table will consist of two halves. As with chipboard, you can buy laminated plywood - this will shorten the manufacturing process since you won't need to paint or prepare the playing surface.

Tip: choose plywood with a sanded surface for your gaming table. And if you use the table outdoors, give preference to moisture-resistant or laminated plywood. Keep in mind that laminated sheets have a significantly higher cost.

The base can be made of wood or metal. The first option is simpler, since the work does not require any additional tools.

Table drawing.

To make something close to a classic tennis table, prepare a number of the following materials:

2 sheets of plywood 15 mm thick;
timber 5*5 cm;
metal brackets for attaching legs 4 pcs.;
self-tapping screws, bolts;
wood enamel (white, green);
masking tape.

Required tools:

hacksaw;
drill;
marking tools: pencil, marker, ruler, corner;
tassels.

An example of a tennis table from a master class.

Process step by step

Now let’s take a step-by-step look at how to make a tennis table yourself:

1. Make blanks of all materials - cut timber and plywood. How much to cut from plywood depends on the original dimensions of the purchased sheet. As a result, you should end up with two halves with parameters 137*152 cm. The timber should be cut as follows: 4 pcs. 6 cm long for legs, 2 pcs. 2 m long and 3 pcs. 1 m long for the underframe. Carefully sand all timber blanks and treat them with an antiseptic.

Prepared materials.

1. Assemble the underframe as shown in the photo below and secure the structure with self-tapping screws.

Support structure.

1. Brackets need to be fixed in the corners of the resulting structure. They will not only serve as fastenings for the legs, but will also further strengthen the frame and protect against loosening.

Underframe with brackets for legs.

1. Next, each leg needs to be adjusted to the brackets (their parameters may differ slightly, so you need to mark both the beam and the brackets). On the side of the fixing bolt, a small plate must be placed on the beam.

Attaching the legs.

1. Then we install the countertop. Place the sheets so that the cut joint is in the middle, under the mesh. Using self-tapping screws, you need to screw the plywood to the underframe. You need to screw in the screws from below, and it is important to choose the correct length of screws so that the sharp ends do not stick out from the playing surface.

Ready product.

The final stage is painting. To do this, you need to choose wood enamel in green color. The table needs to be painted twice, the second layer is applied after the first has completely dried. Then you need to fix the masking tape around the perimeter of the table, retreating 2 cm from the edge and paint the edge with white paint.

Folding design

The main advantage of a folding table is mobility and ease of storage. Tennis tables are quite large and require an entire room to store them in folding form. It is much more convenient to have a folding design - if desired, the product can be taken outside or placed in the living room.

In general, the manufacturing technology of a folding table for a summer house is similar to that described above. But there are important differences:

For a folding structure, you need to make 2 supports - for each half of the table.
At the junction of the supports you need to install card loops, which will ensure the transformation of the structure.

Card hinges for folding design.

The legs of the product can be wooden, mounted on brackets, or made according to the “construction goat” principle. If you have the material and the ability to handle a welding machine, the legs can be made metal.

Collapsible tennis table with trestle legs.

All weather table

The main difference between this product is its resistance to moisture, temperature fluctuations, and ultraviolet radiation. Such products do not fade or deteriorate from prolonged exposure to the street in any weather conditions. All-weather models can be either collapsible or traditional.

The main difference between all-weather structures is the material of the countertop. This is often plastic or melamine.

An example of an all-weather tennis table.

The listed materials have significant drawbacks - plastic has very little weight, which on the one hand is good, because the structure is very light and easy to move. On the other hand, a plastic tabletop does not provide optimal ball bounce. Melamine copes well with this task, but its cost may not be acceptable for everyone. But models with melamine countertops are not afraid of any weather conditions and can stand in the open air all year round.

Tip: to increase the rigidity of the structure, as well as the rebound of the ball, you can make the tabletop two-layer - for the bottom layer, use aluminum sheets, on top of which melamine or plastic is fixed.

Where to install

Requirements for the installation location of the tennis table vary depending on whether it is installed indoors or outdoors.

Indoors

If the structure is installed indoors, then the minimum dimensions of the room are 5 * 3.5 m (one meter on each side of the structure for maneuvers and movement). However, the ideal parameters are 8 * 5 m - this way players will have more space to move. The floor must be level and the flooring must be non-slip.

Tennis table on site.

Street

If you play outdoors, the site must meet the following requirements:

protection from wind (wind gusts, even small ones, will change the trajectory of the ball and greatly interfere with the game);
protection from the sun, which blinds players;
smooth, non-slip, dust-free surface of the site.

As you can see, with the help of detailed instructions, photos and drawings with dimensions, you can quite simply make a tennis table with your own hands. This product will be the key to a fun and active leisure time with family and friends, and will also give you many unforgettable, joyful moments!

Video: making a tennis table with your own hands.

Today we will talk about how to make a real tennis table with your own hands at home from scrap materials. We will also look at detailed instructions and drawings, which tell and show how to make a table for playing table tennis yourself with visual photos and illustrations

Tennis is one of the few games where absolutely all the muscles of the player’s body are evenly loaded and where strength is harmoniously combined with endurance. Unlike lawn tennis, which requires a huge court, table tennis requires only a few square meters of hard surface and a table tennis table. Well, not tricky and not expensive equipment - a net, rackets and a celluloid table tennis ball. They can be purchased at almost any sports store.

The table tennis table is a “miniature court”. Of course, you can buy it ready-made. But you can do it yourself, spending a little time on it.

Professional tennis tables are subject to strict requirements, so when making a tennis table with your own hands, it is also advisable to adhere to them.
Tennis table dimensions.

To begin with, I decided to find on the Internet a drawing of a tennis table indicating all its exact dimensions, height, length, width, etc. The materials used by craftsmen to make a tennis table are very diverse: plywood, chipboard, laminated chipboard, OSB, boards, metal pipes and corners, flat slate, and even concrete. It all depends on the conditions in which your tennis table will “live and work” indoors or outdoors. Therefore, it is very important, before making a tennis table with your own hands, to decide on its location.

If you decide to make a tennis table for your cottage. Then the choice of installation location must also be approached carefully.

It is better to place the table in the shade, as well as in a place inaccessible to wind and precipitation. Choosing the right location for a tennis table in your dacha will allow you to enjoy an exciting game regardless of weather conditions.

Most DIYers prefer to make a stationary tennis table with their own hands rather than a folding, portable one, since it is easier. In a hardware store you can purchase a sheet of laminated chipboard in blue or green color,
There you can also order the service of cutting to size and gluing the edges. And half the work is already done.

Based on the size of the tennis table, it is clear that the easiest way to make it is from a couple of standard “5-foot” sheets of plywood. Since the table must be very rigid, you will have to buy plywood 15-20 mm thick and sanded.

The actual size of the tennis playing table is 274 x 152.5 cm. (The plywood has a size of 1525 mm, so you will need 2 sheets of plywood. You will also need 4 boards 20 - 25 mm thick. And two bars 50 x 50 mm, 3 meters each (you can buy one 6 meter).

When arranging a table tennis table, you need to decide whether this table will be stationary or whether you will remove it. It should also be taken into account that the game will require a certain space around the table. Typically this is approximately 5 x 8 meters, since players can move quite far away from the table during the game. And if you are going to make an "indoor" court, you must take these requirements into account. It is quite difficult to make a “gazebo” of this size.

In addition, it will be necessary to arrange a hard covering of the same size so that players can move freely around the table without raising dust or stumbling in any way. The options here can be different, from a cinder-filled rammed covering to a special wooden flooring or a concreted area. In any case, it should be taken into account that the height of the table from the surface of the covering to the top edge of the tabletop should be 76 cm. The covering itself and the table must be absolutely horizontal.

If the table is installed permanently and in the open air, you should choose a quiet place, protected from the winds, but not in the sun, and so that the sun does not blind the players, otherwise it will be uncomfortable to play.

The design of the table is clear from the sketch. First, make a frame measuring approximately 220 x 120 cm with a crossbar strictly in the middle. The table legs are strengthened in the corners using self-tapping screws and glue. Of course, the table should not wobble. If the table is installed permanently, then the legs are secured in anchor elements concreted or driven into the ground. The frame is covered with several layers of glazing antiseptic.

.

Then a tabletop - court - is installed on the frame. The plywood sheets are cut on one side to 137 cm. If you plan to remove the plywood sheets from the frame (for example, for the winter or during prolonged bad weather), then a hole for the dowels is drilled in the adjacent ends of the plywood sheets and the dowels themselves are driven into one of the sheets with glue. Now you can join sheets of plywood without any problems. At the bottom of the plywood sheets, you can attach tightening hooks that will secure the sheets together. The same dowels can be provided on the table frame so that the table top fits tightly into place. Additionally, you can attach the tabletop to the frame using 4 - 8 metal corners and short screws.

To protect the surface of the tennis table from bad weather and to give it additional rigidity, the surface of the table is carefully sanded, dust is removed with a vacuum cleaner and covered with a glazing antiseptic, usually tinted dark green. The antiseptic is applied in 3-5 layers, and after the first two layers it is also sanded with fine sandpaper, removing the wax. The surface of a good tennis table should be absolutely hard, even and smooth. Such measures will be sufficient for a normal home game of table tennis.

The table tennis net (this is a purchased equipment) is attached to clamps so that its upper edge is at a height of 152.5 mm. The mesh also extends 152.5 mm beyond the edge of the table. The mesh is installed strictly in the middle of the table, above the junction of two sheets of plywood.

The rules of table tennis are quite simple.

The order of serving the ball is determined by lot. The serve is carried out in such a way that the ball lands in the opponent’s half. You can only hit the ball after it bounces in your own half and so that it lands in the opponent’s half. If the ball, when serving, bounces off the table on the server's side, flies over the net, touching it or the net posts, and touches the table on the other side, then a re-serve is performed, and the point is not counted. The number of resubmissions is not limited.

No money! Start earning money right now without initial capital. Here they buy up your intellectual property and copyright at a very high price. Write any unique text on any topic yourself and put it up for free sale. Complete a quick, absolutely free registration on the largest exchange for selling texts, Textsale, and start earning money right from this minute! Register using the banners on this page and immediately start a high-paying job:

Non-lazy users of the Textsale exchange earn on average up to 30,000 rubles per month, without leaving home. The average cost for 1000 letters of text (this is less than half a standard A4 page) is 1 US dollar. You can set a price or more at your discretion. Spit on your boring main job and start receiving money today, without leaving your favorite couch! Or make yourself some extra income in your free time. This is not a scam, but a real opportunity to make good money without entry fees. As much as I wrote, I received as much. This is a reliable exchange founded over 10 years ago and has a solid reputation. Rejoice - you have received a new job and a prestigious creative position!

The receiver reflects the ball that bounced on his side back to the server's side; he, in turn, sends it to the receiving side, and this continues until one of the players makes a mistake. Each mistake gives the opponent 1 point. The player wins a point if the opponent:

Serves the ball incorrectly; deflect the ball from the volley before it touches the table; will reflect the ball off the table; will not be able to receive a correctly sent ball; when reflecting the ball, touches it with the racket more than once or catches the ball on the racket and then throws it; touches the ball during a rally with any part of the body located above the table, or touches the net or table stand.

After every 2 points, the serve goes to the receiver. The game is considered won after one of the players scores 11 points with a lead of at least 2 points. When the score is 10:10, serves alternate after each point. After each game, players change sides and the order of serves. The game consists of 5 or 7 games

At home, the game is played according to simplified rules for changing serve and without limiting the number of sets. In general, as the players agree. Because the main thing here is to enjoy the game and develop skills.

The process of creating a handmade amateur tennis table begins with choosing the type of tabletop surface. Most often, wood and its derivatives are chosen as the main material in the production of tennis tables. The tabletop itself is made of hard and smooth boards, without knots, or chipboard with a thickness of at least 15 mm. You can choose another material that gives a good bounce of the ball. According to the rules of table tennis competitions, a ball thrown from a height of 30.5 cm (equal to 1 foot) must bounce to a height of 23 cm.

An amateur tennis table can be made from either a solid tabletop or halves. The main thing is that the surface of the tennis table should not be distorted and have a stable, uniform rebound, ideally satisfying the rules of table tennis competitions.

Any frame that provides the location of any point on the surface of the tabletop at a height of 76 cm from the floor can serve as a frame for the tabletop.

It is also necessary to provide a place for attaching the net for the tennis table and apply markings.

An example of assembling a tennis table from the site mirpodelki.ru. The tennis table you see in the picture is very convenient: after the game you can quickly fold it and put it away. It will take up very little space. You can make such a table entirely from wood: the panels are made of thick boards, the frames, legs and platform are made of slats and thin planks. But the easiest way to assemble frames is from steel or aluminum corners. manufacturing. Frames are the most painstaking and time-consuming to manufacture.

Start with them. They must be assembled neatly, without distortions, otherwise the boards placed on them will lie unevenly and it will be difficult to play on such a table. Try to choose even corners for the frames. And if they are slightly bent, straighten them with a hammer on a flat slab. It is better to weld steel corners; duralumin ones can be fastened with screws with triangular gussets cut from sheet metal 2-2.5 mm thick. Reinforce the assembled frames with crossbars, also made from corners. Think about how you will connect both frames. It is best to fasten them with piano hinges, but ordinary ones will do. To prevent the loops from interfering with the game, they should be recessed into the shields.

On the side surfaces of the frames, mark and drill holes for the table legs and platform struts. Do not mark the holes for the stops yet. Now get to the platform. It is assembled from a base, two trolleys, four struts, two supports and four furniture casters. All these parts, of course, except for the rollers, can be made of wood. Make the carts from planks 20-25 mm thick.

Make the base and supports from boards approximately 90 mm wide and 20 mm thick, the struts are 60 mm wide and 20 mm thick. If you can’t get ready-made furniture casters, make them yourself: you will need sheet steel 2-2.5 mm thick, M6X40 bolts and wheels from broken toys. Assemble the platform - for now, without fastening it together, but only fixing the parts with one or two screws.

Legs for the table top are made from 80X20 mm boards. In order for the legs to be foldable, they must be hingedly secured to the frame - with bolts and wing nuts. Round the upper parts of the legs. Draw center lines along each leg and mark the holes for the bolts. If the holes are not strengthened, then over time they will break, and a more serious problem may occur: the legs may crack due to stress. Therefore, we advise you to strengthen their upper parts with metal or textolite overlays, and insert bushings into the holes. Install special bearings on the legs so that you can level the playing field.

For the thrust bearing, select a nut approximately M10-M12 and grind a bolt with a wide head for it. Press a nut (or better yet, two) into the table leg and screw in the bolt - the thrust bearing is ready. Fasten the legs in pairs with 60X20 mm strips and start making shields. It is probably not worth reminding that the playing field of a tennis table should be level, without cracks or holes. Its coating must be thick and massive so that the ball bounces well. Not everyone has large sheets of 12-16 mm plywood, so we suggest you make boards from boards 25-30 mm thick, preferably tongue-and-groove. Shields can be assembled directly on the frame. First, mark and drill holes on the frame along the width of the boards for attaching the boards, prepare four wedges and two metal pins.

Secure the first board from the edge “tightly” with long screws. Then place the second board on the frame and press it with wedges to the first board, and be sure to additionally tighten the protruding parts of the boards with a strip on both sides for strength. Make slits for hinges in the shields, put the legs in place, fasten the shields with hinges and connect them to the platform. Use a plumber's level to check the levelness of the playing field. If it is slightly tilted, straighten it by adjusting the length of the platform parts, and if necessary, the legs.

This work is not difficult, but requires patience and accuracy. Fold the table. If you have properly reinforced the hinges and struts, it will easily fold and take the form shown in the figure. 1. To prevent the shields from swinging on the hinges of the struts, attach stops to them in place. So, the ping pong table is assembled. All that remains is to fill the cracks - the junctions of the boards (if the fit is good, they are almost invisible), clean the surface of the table with pumice, and then with sandpaper and paint the playing field matte green.

Necessary materials.

Based on the presented dimensions, we prepare the necessary materials for work:
Sanded plywood 1525x1525x12 mm – 2 pcs.
Edged timber 50x50x3000 mm – 5 pcs.
Metal brackets for attaching legs – 4 pcs.
Self-tapping screws 5x89 – 38 pcs.
Self-tapping screws 3.5x49 – 45 pcs.
Bolts for attaching brackets to legs – 4 pcs.
Antiseptic for wood.
Wood putty, enamel for painting the tabletop (matte green, or blue, black).
Aerosol enamel white.
List of tools

To make a tennis table with your own hands, you will need the following set of tools:

Hacksaw.
Welding machine.
Drill, iron drills.
Spatula, roller, paint brush.
Blanks for a tennis table

As for the table top, everything is simple. Plywood is sold in sheets of exactly 1525x1525, and the cover will take two sheets. The European dimensions of a tennis table are 5x9 feet (one foot = 348 mm), so you will only have to adjust the plywood in length, measuring and sawing 155 mm from each slab. The junction of the two sheets will pass directly under the mesh.

Now we cut the timber. We treat all the workpieces with an antiseptic and let them dry.

We adjust the legs to the fastenings, removing the wood until the beam begins to easily slide into place. In this case, we take into account the insertion of an additional plate that distributes the tension force from the bolt. In any case, homemade brackets will have slight differences in size, so each stand must correspond to its socket. To do this, we number both the brackets and the legs. We drill holes, slightly drilling them out so that the heads of the hardware are flush with the surface of the tabletop.
Let's analyze the design. We lay the frame on the floor, install a cover with ready-made holes for self-tapping screws on it and carefully screw it on. You can screw in the screws from the reverse side, calculating their length so as not to damage the surface of the countertop.

Making a tennis table consists of simple elements that do not require scarce and expensive materials, and its assembly can be done even by teenagers, who, in fact, will need this table the most. A few wooden blocks, boards and chipboards - that’s all that will be used to assemble such a tennis table, which will have a place for use both in city yards and in summer cottages.

To make a tennis table base with your own hands

The supporting part of the playground (or tabletop) is constructed in this way. Essentially, they form three frame structures that have identical (modular) elements in the form of an inverted "U", four elements each. We connect two of them very rigidly to form the main central support. The remaining two pieces should essentially serve as end legs for each half of the tabletop assembly.

To make a modular element, we take parts that will simultaneously act as two table legs with a cross-section of 40x30 mm. and height 700 mm. We connect the lower part of the legs using a longitudinal cross member by making the same block whose length is 1360 mm. And into the upper parts of the bars we cut wooden brackets for a hinged platform, which we attach directly to the lower plane of the tabletop.

Next, we connect these resulting modules to each other transversely with sidewalls, preparing two boards measuring 500x200 mm. and having a thickness of 20 mm. Thanks to these sidewalls, we form a rigid frame structure that will serve as the central support part for our tennis table.

We move the remaining two modules from the center of the table to the edge and also attach such a hinged platform to the lower plane in each half of the tabletop, they will also serve as legs. In the disassembled form of the table base, we secure each module with an overhead spacer made of a block, from the bottom of which, for this purpose, along the edge we attach two dies for fixation. We place a spacer on the crossbar to the central support and its own leg so that it cannot tuck under.

Making a tennis table top with your own hands

The tabletop should consist of two halves of equal size, which are joined in the middle and rest on the central support. Each half is made from chipboard panels, the upper plane of which is covered with plastic. If there is none, then we treat our tabletop with drying oil, and after drying, cover it with several layers of oil paint (green, brown or black). Along the edge of the outside perimeter we frame both halves of the future playground using slats.
As I already mentioned, we attach a hinged platform to the bottom of the tabletop into the supporting part of the playground. To do this, we use epoxy resin (glue) and screws of appropriate sizes and lengths - those that could not pass through and damage the playing field.

Drawings and dimensions of a homemade tennis table. DIY tennis table assembly

First, we assemble the frame itself with support modules with crossbars and sidewalls and brackets embedded in them. Then we will prepare the spacers. Next, we connect the support modules with crossbars made of boards, so we get a rigid central support. According to preliminary markings, at the bottom, in each half of the playing board-field, we install our own hinge pad using glue and screws.

Once the glue has cured, you can begin the final assembly of the table. We connect each half of it with its hinge platform to the corresponding bracket, and we fasten it with a bolt (preferably with a wing nut to make it convenient to assemble and disassemble the table in the future). This will be easier to do if you place the tabletop halves vertically. .

After we have completed the assembly, we lower each half of the tabletops onto its own support. And so, our playground is ready. All that remains is to fix the linings on the crossbar of each support. And only now the net for the tennis game is being stretched. The supporting part of the playing field can be made of 3 structures, including 4 modular elements that are the same size. It resembles the letter "P". The central support should include 2 elements that are rigidly connected to each other, and the remaining 2 elements are end legs that support each half of the tabletop.

In order to connect two modules, you will need boards 2 cm thick and 50x20 cm in size. This will help create a rigid frame structure to support the table. The remaining two modules will serve as the legs of the tennis table.
By following these simple steps you can easily create a tennis table with your own hands for use in a private home or country house.

Amateur sports can not only diversify your leisure time, but also bring health benefits. Currently, the hobby of ping pong is very popular among children and adults. If you want to master this game, you need to take care of having a specialized tennis table, making it yourself will help you save a decent amount of money.

How to make a ping pong table with your own hands

Currently, there is a wide range of ping pong table models on the market, however, a homemade table can compete with most of them. The designs of such products are simple and do not require the use of complex technological techniques. And the preliminary purchase of high-quality materials will allow us to produce a product suitable for use both at home and outdoors.

Before you start making such a table, you need to decide which design will be more acceptable for you. Ping-pong tables can be folding or stationary. The latter option is best suited for outdoor installation.

And folding models allow you to save useful space when the game becomes irrelevant. When deciding in advance where the table will be installed, you should remember that there should be enough space around it for players to move freely. The area of such space should be 5x8 m.

The flooring deserves special attention. It is advisable to give preference to a solid and smooth anti-slip option. A floor made of bitumen or concrete is excellent for this purpose. Wooden flooring installed on a level and hard surface is no less effective.

Tabletop dimensions

In accordance with standards accepted throughout the world, a classic ping pong table should be 2740 mm long and 1525 mm wide, with a standard height from the floor of 760 mm. However, it is possible to make a table with other dimensional characteristics, taking into account individual requirements and the area of the space expected for its installation. For teenagers, the height of such a product can be from 600 to 700 mm. The dimensions of the mini-table are 2440x12200 mm, and in some cases even 110x61 mm. The thickness of the tabletop of such a product used within a club, according to generally accepted standards, should be 22 mm, while for a professional game you will need a tabletop with a thickness of 25 to 28 mm. And for amateur tennis, a slab with a thickness of 16–19 mm is quite suitable.

What materials can be used for manufacturing

When choosing materials for a table made by yourself, you can choose sheet plywood, OSB and chipboard. Each of them will be able to provide the required rebound height of a standard ball falling from a height of 30 cm, equal to 23 cm, as indicated in generally accepted standards.

Plywood

Currently, there is a wide range of plywood sheets on the market, corresponding to the following sizes:

1525 x 1525 mm;
1525 x 1300 mm;
1525 x 1475 mm;
1475 x 1474 mm.

From this material you can make a folding tabletop consisting of two halves by cutting to a given size on only one side. In addition, the plywood surface does not require additional processing, which will save time and money. However, when purchasing plywood sheets, it is advisable to give preference to goods of grades I and II with the marking “Ш1”, indicating the presence of a polished surface and sufficient moisture resistance.

A tabletop made of plywood has a number of disadvantages, one of which is its sagging. It is for this reason that this material is best used in the manufacture of non-dismountable tables on a rigid box-shaped base equipped with struts. Boards are perfect for making such a support. To fasten the plywood tabletop to the base, you can use self-tapping screws installed along the contour of the product in increments of 100–150 mm. In this case, it is advisable to putty their heads.

Another disadvantage of the plywood table is the sluggish, albeit correct, rebound of the ball. Painting the surface of the countertop with water-based acrylic paint, applied in 2-3 layers, will help correct the situation. This treatment will simultaneously enhance the moisture resistance of the product. However, before applying a layer of paint, it is necessary to impregnate the plywood sheets with a water-polymer emulsion on both sides.

Chipboard

When choosing a particle board to make a ping-pong table, pay attention to its following dimensions, which are optimal for such a product:

2750 x 1830 mm;
2750 x 1750 mm;
2750 x 1500 mm

The quality of this material largely depends on the brand of the manufacturer, but in general it is quite capable of meeting existing requirements. By purchasing a sheet with dimensional characteristics of 2750x1500 m, you are buying an almost ready-made tabletop suitable for a stationary structure. In this case, you can choose a laminated sheet in blue or green, which eliminates the need for painting.

This material, with a thickness of 16 mm, is very heavy, which is ideal for making a strong and massive tennis table. If you need to adjust the dimensional characteristics of a chipboard sheet, you can use the services of material sellers who can trim it in accordance with the dimensions you specified, as well as perform trimming. Purchasing chipboard will cost more than purchasing plywood sheets, however, the durability of this material is higher.

Laminated plywood

When creating ping pong tables with your own hands, you can also use laminated plywood, which eliminates the possibility of deformation during use. This material, made on the basis of waterproof birch plywood, is not flammable and is also resistant to a number of mechanical damage. Melamine is used as a laminate in the production of such products with subsequent processing. In addition, laminated plywood has a rich range of colors, which will also help save on painting. Standard sheet sizes will allow you to produce both solid and folding tabletops.

High-quality plastic is used as an edge for this material, however, the material itself is not at all tiny. The edge line of the field can be drawn using masking tape, and the demarcation lines are best made with acrylic paint, which will not be erased over a long period of time. The tennis table, made of laminated plywood, can be placed outdoors. During the game, the rebound of the ball from the surface of such a table will be ideal. The cost of this material cannot be classified as cheap, however, the money spent will correspond to the high level of quality of your future table.

Fiberglass

Another universal material that can be useful in the production of ping-pong tabletops is fiberglass, sheets of which can be purchased at specialized construction stores. When choosing, it is advisable to give preference to sheets 10 mm thick, the color of which can be any. Created using modern technologies, fiberglass has enviable strength and low weight. A table equipped with such a tabletop will be all-weather, since the material is designed for use in a wide temperature range. Products made from it are insured against rotting processes, and are also distinguished by enviable resistance to mechanical damage and deformation. One of the features of this material is also its non-flammability. The cost of fiberglass is quite high, but completely justified taking into account the listed qualities.

Composite aluminum

In some cases, aluminum is used to make ping pong tables. These tabletops correspond to the characteristics of semi-professional tables, the thickness of which is 22 mm. Externally, this material resembles pressed chipboard and can be used outdoors without fear of deformation and mechanical damage. There is a myth that the bounce noise level from aluminum tables is quite high. However, this is a misconception. Such all-weather tables are very practical and can fully satisfy the expectations of their owners. The cost of the material in this case is very reasonable, however, such a table will still cost more than a product equipped with a plywood tabletop.

Fixed ping pong tables intended for outdoor installation are best made from all-weather materials that can withstand changes in weather conditions. However, as protection from precipitation, preventing the surface of the tabletop from getting wet, you can use a moisture-repellent tent material or durable rolled polyethylene.

Drawings and step-by-step instructions for making ping-pong tables with your own hands

Model of a table intended for indoor use

To make a wooden tennis table with your own hands, the model of which is best suited for indoor installation, you will need the following materials:

board 25 x 100, length 1050 mm - 6 pcs.;
board 30 x 100, length 2200 mm - 2 pcs.;
timber 50 x 50, length 750 mm (for legs) – 6 pcs.;
block 30 x 50, length 850 mm (for underbench) – 4 pcs.;
adjustable furniture leg - 4 pcs.;
M8 studs or bolts, length 120–125 mm - 12 pcs.;
M8 nuts and washers – 24 sets;
wood screws;
sandpaper.

In this case, it would be advisable to prepare in advance such tools as:

hacksaw;
chisel;
screwdrivers;
drill or screwdriver;
drill with a diameter of 8 mm;
open-end wrenches 12 x 13 mm;
marking tool (pencil, tape measure, carpenter's square).

The proposed design option for a ping pong table consists of a tabletop made according to the specified dimensions,

three support legs

and two longitudinal bars.

The parameters of each of the parts are similarly indicated in the drawings.

Initially, you need to prepare the tabletop canvas, as well as create all the necessary parts, based on the information specified in the drawings. In this case, the grooves located on the longitudinal beam and having a cross-section of 50x100 mm must fit as tightly as possible into the mating grooves located on the support legs.
Then the support legs should be assembled. To do this, adjustable furniture legs should be attached to bars with a cross-section of 50x50 mm, specially designed for them, using nuts and studs.
Afterwards, it is necessary to assemble the frame, which involves inserting longitudinal bars into the grooves of the legs from above.
After completing this stage, it is necessary to securely attach the bars with a cross-section of 30x50 mm to the tabletop using self-tapping screws.
We install the tabletop on the resulting frame, fixing its position relative to the longitudinal bars. You can use bolts as fasteners, having previously drilled the longitudinal bars together with bars with a section of 30x50, or self-tapping screws.

After completing the work, you will receive something like this finished product.

Collapsible tennis table model

To create another version of a collapsible model of a tennis table with your own hands, you will need:

Sanded plywood 1525x1525x12 mm - 2 pcs.
Edged timber 50x50x3000 mm - 5 pcs.
Metal brackets for attaching legs - 4 pcs.
Self-tapping screws 5x89 – 38 pcs.
Self-tapping screws 3.5x49 – 45 pcs.
Bolts for attaching brackets to legs - 4 pcs.
Antiseptic for wood.
Wood putty, enamel for painting the tabletop (matte green, or blue, black).
Aerosol enamel white
And the following tools:
Hacksaw.
Welding machine.
Drill, iron drills.
Spatula, roller, paint brush.
In this case, the manufactured table will correspond to the following dimensional characteristics:
The height of the table from the floor covering to the mesh is 760 mm.
The length of the table cover is 2740 mm.
The width of the table cover is 1525 mm.

And in the presented drawing you can also familiarize yourself with the parameters of the installed grid.

This design assumes the presence of an easily removable tabletop, which requires special brackets that allow for quick disassembly of the table and will act as reliable fasteners. For people who are far from working with metal, such products can be ordered in locksmith shops.

Assembly

After marking the beams, you need to assemble the support frame, securing it with self-tapping screws.
Then we mount brackets to the corners of the frame, which can stretch and hold the corners of the frame.
Now you need to adjust the existing legs to the fastenings by removing excess wood. However, it is necessary to create conditions for inserting an additional plate, the task of which will be to distribute and increase the tension from the bolt. Since the brackets will be made by hand, each of them will have slight differences. For this reason, each of the stands used will have to exactly match the parameters of its socket. To avoid confusion, it is advisable to number the legs and brackets.
Then you should install the timber in the nests and bolt it to the brackets. After this, you can place the resulting platform on legs firmly screwed to the frame.
We create holes the size of which allows you to install the heads of the hardware flush with the surface of the slab.
We disassemble the resulting structure, after which we screw a lid equipped with ready-made holes for self-tapping screws to the frame located on the floor.

Painting

Drawing of a folding table tennis table model

Among table tennis fans, folding table models are especially popular, allowing you to start playing even in the absence of a partner. You can make such a table with your own hands, based on the drawing provided below.

However, in this drawing, the stacked tabletop is made of boards, which is not a very successful and practical option. As a material for its manufacture, you can use plywood or any other option described in this article. This will eliminate the need to install additional fastening lines, without compromising the strength of the structure.

To create such a model of a ping pong table, you can use wooden elements. However, a simpler solution would be to create a frame using corners made of steel or duralumin. In this case, it is better to weld the steel corners, and to fasten the duralumin elements, use screws with triangular scarves made of metal, the thickness of which is from 2 to 2.5 mm.

To provide the frames with the required rigidity, it is advisable to strengthen them with transverse bars made from corners. To connect the frames, you can use piano hinges or regular hinges, which should be recessed into the panels. Holes must be made in the side surfaces of the frames for attaching table legs and platform struts.

The platform is based on:

four struts,
four furniture casters,
two supports,
two carts.

The trolleys are made from boards with a thickness of 20 to 25 mm. To create struts you will need boards 60 mm wide and 20 mm thick. And the base should be made of boards 90 mm wide and 20 mm thick. Furniture casters can be selected and purchased in specialized stores.

For the legs you will need 80x20 mm boards. Their fastening to the frame must be hinged, made using bolts with wing nuts. This will allow you to fold them if necessary.

The holes for the bolts should be marked on the legs by drawing center lines along each of them.
It is advisable to strengthen the upper parts of the legs with metal plates, and equip the holes with bushings for more reliable fixation.
To level the playing field, it is recommended to install thrust bearings on each of the legs. To do this, use an M-10 or M12 nut and grind a bolt for it.
Then you need to press it into the leg of the structure and screw in the bolt.
The legs must be fastened in pairs with 60x20 mm strips.
Next, install a countertop made from the material of your choice. Self-tapping screws or long screws can be used as fasteners.
Paint the tabletop in the desired color, then apply the playing field markings.

Features that need to be taken into account when making legs for a tennis table

Tennis tables intended for outdoor use are best made without the use of adjustable furniture legs. When installed on the ground, such legs will get stuck in it, and when installed on a paved surface, they do not have enough adjustment limit. The best material for the manufacture of the supporting structure in this case will be metal. A structure equipped with such legs will stand firmly on the ground and can be leveled by simply pressing the legs into the soil. This is the best option for a folding table.

In some cases, it is very advisable to make the base of the table in the form of a “goat”, made of wooden beams, with the additional installation of two beams or boards on top, which will prevent the table top from sagging.

Design of support "goats"

The sizes of the trestles can be any, provided that their overall width should be approximately 300 m less than the width of the table top.

To calculate the height of the “goat”, a formula is used according to which the thickness of the tabletop slab should be subtracted from 760 mm, and then the height of the timber placed under it should be subtracted.

Other types of bases are also used for outdoor tennis tables.

Making a table yourself is not too difficult a task. Properly selected materials and tools will help make your dream come true, eliminating the need for large expenses. Exciting ping-pong activities will help you maintain excellent physical shape and bring a lot of positive emotions to people of all ages.