Dimensions of a wooden bird feeder. DIY bird feeder with drawing

Making feeders, without which it is quite difficult for birds to survive the harsh winter, does not require much effort.

But in gratitude for the care shown, the feathered chirps will repay you a hundredfold, destroying garden pests on your site and thus saving the harvest.

The article discusses manufacturing options feeders made from various materials with step-by-step construction instructions.

What types of feeders are there?

Feeders can be different. They differ on materials and manufacturing complexity, but at the same time they have one task: to feed the birds, for whom winter is a severe test.

Most often the design is platform, above which there is a canopy for protection from rain and snow. On this site there is a container into which food is poured.

It is best to choose a feeder that hangs out of reach of cats and dogs. Sometimes the feeder is installed on a post dug into the ground or on a tree.

Materials For feeders, wood (boards and even branches of medium thickness), pieces of plywood, a plastic bottle, thick cardboard, a juice carton, an old headlight, a large pumpkin and much more can be used.

Requirements for feeders

The poultry canteen is presented with certain requirements:

there must be a feeder conveniently located: away from housing and in a place protected from the wind;
have roof which will protect food from rain and snow;
birds should easily hit inside the feeder and get out from her;
the manufacturing material must withstand high humidity and temperature fluctuations.

DIY wooden feeder

Wooden feeder is rightfully considered a traditional design, and it may well last for more than one year.

Old furniture panels, plywood, and scrap boards can be used. But the most beautiful feeders are made from unprocessed branches, which are laid like a wooden frame.

Sequencing:

Theoretical stage: execution of the sketch future feeder on a sheet of paper. Approximate overall dimensions of the structure 30x30x25 cm(length, width and height);
Preparatory stage: marking the material by size and cutting it. First, mark 3 parts of the same size 300x230 mm. These are the future bottom (1 part) and the roof, consisting of two parts. Then you should mark the base with size 3 00x300 mm and 2 side walls 250x230 mm. When all the parts are marked, we begin cutting the material;
Practical stage: assembling the feeder. On a board base exactly in the middle the bottom is fixed. On the left and right, two side walls are attached to it, and two halves of the plywood roof are attached to them; it is best to fasten all parts of the structure using self-tapping screws. The simplest wooden feeder is ready.

Plastic feeder

Plastic feeder from available means does not require any costs for its manufacture. Even a child can make such a feeder.

Just stock up on two or five liters plastic bottle with handle, sharp scissors and a piece of wire.

Cut a hole in the bottom of the bottle hole and pour food into it, then hang your feeder on a branch using the handle. To prevent the wind from tearing the feeder from the tree, secure it with piece of wire.

We recommend! The edges of the cut hole are quite sharp. To prevent birds from injuring their paws, just quickly run the light of a regular lighter along the cut. When exposed to high temperatures, the plastic will bend slightly. Now it will be much more convenient for birds to climb into the feeder.

Hopper feeder

This type of feeder is very popular in poultry farming, but why not use a similar construction in our case.

Hopper feeder presented in two parts:

pallet with low sides;
feed container with small holes at the bottom.

To create such a feeder with your own hands, you will need the following materials:

liter plastic bottle with a wide neck;
two liter bottle from mineral water or soda;
spicy knife or scissors
wire.

A liter bottle, which will serve as a container for food, cut off threaded part of the neck. Along the cutting line with scissors, make several cutouts for pouring out feed. The bottom of the second bottle is cut off. This will be ours pallet.

Into container food is placed, and a pallet is installed on top. Now all that remains is to quickly turn the feeder over. The sides prevent the grains from spilling out of the feeder, and the size of the tray does not allow the bird to climb into it.

When the birds begin to peck at the food, new portions will pour out spontaneously. This automatic design does not require frequent filling; bird food does not spill or become dirty.

In order for the structure to acquire the necessary stability, it should be screw it with wire to a wooden stand. Any online store with goods for poultry breeding offers an assortment of bunker feeders, especially many options for bunker feeders for.

What can you feed birds?

Birds love raw food most of all. sunflower seeds. This food will provide the birds with a supply of energy.

The birds will not refuse millet, oats, pumpkin seeds, melon, watermelon. You can also stock up on seeds of wild herbs. Visitors to the poultry canteen will also like berries - bunches of viburnum and rowan.

Can you offer a piece? unsalted lard and calcium supplement from finely ground eggshells. Feathered guests will happily enjoy food crumbs, pieces of chicken eggs, nuts, white bread crackers and even dry pet food.

Important tip! Never offer your birds salty, sour, spicy or fried food. Brown bread, which is poorly digested, is also dangerous for them.

Where to buy ready-made feeders

If you don’t have enough time to make your own feeder, then you can buy not only feeders, but also birdhouses, drinking bowls, garden figures in the form of animals or gnomes in combination with feeders.

A wooden feeder will do without any fuss at 250 rubles, original log house about 800 rubles, and a large garden sculpture with a feeder about 2500 rubles.

But you must admit that it is much more interesting for a home craftsman to build something unusual from scrap materials on one's own. And it will be interesting and useful for children.

Detailed instructions for assembling bunker feeders from plastic bottles, watch in this video.

A bird feeder performs several functions at once. Firstly, it is a place to save birds from starvation. Secondly, the feeder decorates the exterior of gardens, parks or simply streets. Thirdly, making a feeder is quite an entertaining process that unites parents and children and teaches the younger generation norms of behavior and human qualities. Therefore, whenever possible, we recommend building feeders, and we will learn how to do this further.

How to make a bird feeder with your own hands

We invite you to familiarize yourself with the main variations of bird feeders, which are most often used to feed them in the winter.

The first and simplest option is to make a roofless forest canteen. It has a flat shape with sides that prevent feed from spilling out. Such a bird canteen is good because it attracts birds, as they do not like enclosed areas. The disadvantage of the feeder is that the food quickly gets wet and spoils under atmospheric influences, and the wind easily overturns such a feeder. To construct this variation of the feeder, one piece of plywood and bars that serve as a frame are enough. The feeder is fixed using a regular rope; in order for the feeder to attract birds, paint it in a bright shade.

A DIY bird feeder made of wood with a roof is a more sustainable option. Four support posts are installed on a regular base, and the roof of the feeder is fixed on them. The top part for the roof should be slightly larger than the bottom to protect the feed from rain and snow. This version of the feeder is also simple and does not require special experience in working with wood. Among the disadvantages of this design, we note that snow accumulates on the flat roof, the feeder becomes heavy in weight, and can fall from the tree. Therefore, it is recommended to periodically clean such a feeder from snow or install a pitched roof.

If you have sunflowers or large berries at home that birds can eat, it is enough to treat the birds with them. A variation in the production of rowan beads or beads from cones is possible. You can build such a feeder from scrap materials. For example, you can put treats in a regular net, in which tangerines or oranges are sold. You need to hang such a gift on a regular rope. Another method is to add wheat or another grain delicacy to unsalted melted lard; after hardening, you need to make a small ball from this mixture, which is placed in any place accessible to the birds. The congealed fat holds the grain, which is gradually eaten by the birds.

To protect the food in the tangerine net, you can additionally build a roof. This way, the food will not be exposed to moisture and snow. Periodically, such a feeder needs to be filled with new food. It is possible to supplement the main feeder with additional mesh feeders containing a variety of delicacies. These feeders will be an excellent place for small birds to feed.

If you have coconut shells at home, you can also use them to build a small feeder. It will be a natural addition to any tree and will not stand out particularly against its background. It is necessary to cut two round holes in the shell. We also recommend placing grain mixed with melted fat inside the feeder. This variation of the feeder has an unusual and original design. If you have a steel mesh with a small cross-section of cells at home, you can also build a feeder from it. Select the diameter of the feeder individually; try not to make it too large, as too much feed will make the structure heavier. Make a protective cover on such a feeder to prevent food spoilage.

There are many ideas for DIY bird feeders, all you have to do is get creative and get the necessary materials. A feeder can even be built from cutting a branch. It is enough to connect several of these parts together to form the bottom of the feeder. The roof is made in the same way.

Some craftsmen make feeders from ordinary glass jars. They set them at a certain angle and pour food inside. You can paint such a feeder using special paints for glass surfaces. In the same way, you can make a feeder from the old part. It is better to put gelatinized food in it, previously poured with melted gelatin. In the same way, you can make attractive bird feeder decorations. For example, a solution of gelatin and various seeds is poured into a silicone mold; after hardening, it is possible to obtain beautiful shapes: heart-shaped, star-shaped, semicircular, etc.

Beautiful DIY bird feeder

We offer a variation of creating a cereal canteen for birds with your own hands. For this product, it is enough to use food, while the feeder perfectly complements the exterior of the garden and becomes its decoration. When performing the workflow, you will need the following accessories:

a variety of small-sized food, most often grains or cereals are used;
eggs;
oatmeal;
flour;
gelatin composition;
pencil;
thick cardboard base;
scissors and thread.

Using a pencil and cardboard, come up with a shape for the future product. It is possible to make a bird canteen in the shape of a star, polyhedron, oval, circle or heart. Using scissors, cut out the previously prepared drawing.

Prepare materials that act as bird food. It is possible to use various grains or bread crumbs. Using a needle, attach a thread to the future sketch, which will later secure the feeder to the trees. In order to firmly hold the grains on the feeder, it is necessary to connect them with a natural adhesive composition.

To prepare it, combine the ingredients in the form:

two tablespoons of oatmeal, ground into flour;
one egg;
one teaspoon of honey;
a few spoons of flour.

After combining all the components, leave them for half an hour and only after this time, combine them with the previously prepared food.

First, the base of the workpiece is coated with adhesive. In a separate container, all the ingredients for the food are combined with glue. Roll the workpiece in the resulting mixture on both sides. To make the feeders harden faster, place them in the refrigerator for 2 hours.

In the absence of any of the ingredients of the adhesive composition. You can prepare natural glue in another way. To do this, just take one pack of gelatin and soak it in warm water, according to the instructions on the package. Small grain products are combined with the solution and placed in a refrigerator to harden.

This composition can be placed in an old cup or glass; they are also fixed to trees using a rope. This bird canteen is quite easy to make, but at the same time it is an excellent place to feed birds in the winter.

We also suggest that when performing the work process, prepare materials in the form of:

three flat-shaped boxes of sweets;
glue;
tape;
ropes.

In order to build this feeder, it is enough to connect two candy boxes together with an adhesive solution. At the same time, they should form a roof. The third box is used as the bottom of the feeder. This variation of the feeder is quite easy to make, but at the same time it is an excellent place to feed birds. To protect the cardboard from moisture, the feeder is covered with tape on all sides. In order to fix the feeder on the tree, an additional rope is attached to it. You can decorate the feeder with colored paper in accordance with the chosen design. The only drawback of this feeder is its light weight. It is unstable and does not hold weight well.

Make a bird feeder with your own hands photo:

We offer another easy option for creating a bird canteen. To do this, you need to use a box from any drink. The upper part of the box is fixed to the tree with a cord, and a hole is cut out on the lower part for feeding and eating food. It is recommended to additionally seal the box with tape to avoid its destruction under the influence of water.

DIY bird feeder - original ideas

There are many creative ideas for creating bird canteens. Most often, these exterior elements are made of wood or plastic. We invite you to familiarize yourself with the variation in the construction of a PVC feeder.

When executing the workflow, you will need to have:

scissors or knife;
plastic tank with a volume of five liters;
wire.

In addition, you should prepare food for birds, which will be located in the forest dining room. Using a utility knife or scissors, cut a circular hole in the bottom of the container. The diameter of the opening should be such that a bird can easily fly into it. It is possible to construct several windows at once through which feed will be supplied. The upper part of the container is wrapped with wire and installed on a branch. To weight the finished product, use plywood or similar material that is placed at the bottom. This bird canteen has a roof, so the birds' food will not be wet. In addition, the presence of large diameter holes is the key to ensuring that there will always be a lot of birds in your feeder.

It is possible to design a do-it-yourself bird feeder using PVC bottles. When working on a dining room for birds, you will need to prepare the following materials:

PVC bottles;
wires;
two spoons made of wood.

Using a knife or scissors, make an opening in the container so that a wooden spoon can be inserted through it. 5 cm higher, make another identical hole. Set the spoons and pour food into the bottle. On one side of the spoon, which is adjacent to the bottle with a wide edge, build a hole of a larger diameter. Thus, as the birds eat it, food will spill out of the bottle. The upper part of the container is fixed to the tree most often using wire or rope.

DIY bird feeders photo:

An easier variation of making a bird canteen is to cut out a small door in a PVC bottle. In order to avoid injury to birds as they enter the feeder, all edges of the opening are sealed with electrical tape. Food is poured directly into the container.

Original DIY bird feeder

In the process of creating a wooden forest canteen for birds, you need to stock up on tools in the form of:

wood or plywood;
hammer with nails;
timber;
screwdriver;
compositions to protect wood from high humidity.

Using plywood and a board, use a screwdriver to cut out the base for the feeder. The second part should be the same shape, only slightly larger. Thus, it will protect the feeder from moisture. Saw the timber into several parts, from which you need to make sides for the feeder.

To fix the beam, use fasteners and a hammer. A wire or cord should be fixed to the roof, which will hold the roof on the branches. To connect the roof and the bottom of the forest canteen, additional supports are used, installed in the corners, or two in the center. Open the feeder with an antiseptic, which prevents its destruction under atmospheric influence; it is additionally recommended to varnish the feeder.

Please note that it is strictly forbidden to feed birds fresh bread, rye bread and flour, citrus fruits, salty foods, toasted seeds, and oatmeal. These products will not bring any benefit to the birds, but will only harm them.

Various types of grain, wheat, nuts, fruits, dried foods, lard, rowan and viburnum, etc. are used as food for birds. A beautiful homemade bird feeder will decorate any interior; children will enjoy watching the birds eat food and rejoice in the fact that they are taken care of.

DIY bird feeder video:

Birds are our smaller friends who delight us with their chirping and singing. And any garden in the presence of birds seems to come to life, filled with new life. Besides Birds help protect summer cottages from attacks by various insects in summer.. And in winter, when they have almost no food, man’s task is to help the birds survive the frosts by feeding them. A good attitude towards birds will pay off handsomely. for birds you can do it yourself quickly, without unnecessary manipulations, it will not only become a source of food for birds, but will also be able to decorate any area.

Many people made feeders for winged birds while studying at school, and some, together with their parents, managed to make more than one feeder while still attending kindergarten. At that time, tasks for making feeders were given at school with the goal of instilling in the child a desire to work and take care of our little brothers.

Now, in most cases, feeders are located in house areas with the aim of luring birds to live permanently in the garden or to take care of them in the winter. There are a great many variations of feeders, but we should not forget that if a person is pursuing a good goal, he must ensure that the feeder is not just beautiful, but comfortable and attractive to birds.

So what should it be like so that birds from all over the area will flock to peck at delicious delicacies?

The feeder should not be bright. Do not forget that birds are inhabitants of the wild, in which bright colors often indicate the danger of any insect or animal. So it is unlikely that birds will fly to nuclear flower feeders. The best option is the color of the wood.
The feeding area should be equipped with small sides so that the food does not fall out of it during the wind and at the moment when the bird lands on the feeder and swings it.
It is important to make sure that the sides and other elements of the feeder are not sharp and do not pose a danger to birds.
The best thing, so that the feeder has a small roof- then the food lying in it will not get wet in the rain, and it will not be covered with snow.
It is recommended to place the feeder where cats and other predators cannot reach it.. Then the birds will happily fly to it. If the place is dangerous, then it is unlikely that you will be able to attract birds.
All openings in the walls of the feeder should be spacious so as not to create the effect of a closed space. Otherwise the birds will be uncomfortable.
It is best to make a feeding place that will withstand various weather conditions and will not collapse after the first season.
The food in the feeder should be clearly visible- Birds use their vision more than other senses when looking for food.

Advice! In order to make the structure heavier and protect it from swaying in the wind, you can place pebbles in it, but so that they do not end up in the food.

Which is better: homemade or from the store?

You can make a bird eating area yourself, but stores now sell ready-made designs and products that you can simply purchase and hang in your garden or outside your window. Of course, this saves a lot of time, but it’s better to make the feeder yourself or order it from craftsmen. Only in this case can you be sure that the feeder is made of materials that are safe for flying inhabitants of nature and will perform its function correctly.

On a note! Undoubtedly, you need to pay attention to the design of the feeder, but if it is not just a decorative decoration for the garden, then, first of all, you should pay attention to its functionality.

It is also important to understand that a good feeder, but made in production or by craftsmen, will cost a lot of money. So it’s worth thinking about what to do - save money and do everything yourself, or spend money and buy a ready-made option.

Provided that in fact the feeding station can be made quite quickly and simply, the DIY option remains the best. The main thing is to decide and decide what and how to make the feeder from, how and where it will hang, and also take into account the availability of skills in making various products. You shouldn’t take on a complex project without proper experience; it’s easier to choose the simplest option. Fortunately, there are many types of feeders.

Table. Types of feeders.

View	Description
	This category includes all types of feeders that are fixed in the right place by hanging. Such a design will most likely require weighting with something to prevent it from swaying in the wind and when birds land. This category also includes simple feeders with lard or grains molded into one lump. They are hung from trees with string.
	The most familiar, familiar from childhood and widespread option. The roof of this product is made in the shape of a house; it protects the food from getting wet. It is best if the roof is installed on thin blocks so that there is as much free space for birds as possible.
	Such a feeder is a board with sides, attached to something or suspended. It does not have a roof, and therefore the food will constantly get wet or be covered with snow. But this is the simplest option.
	This feeder is a small container-hopper containing food inside. Birds, pecking the food that has spilled onto the tray, make room for new food, which gradually pours out of the bunker. Also, in some cases, birds can peck grain directly from the bin. The main advantage is good protection of feed from water and wind.
	Feeder designed for shellers. Often sold in stores. It needs to be periodically cleaned of debris, as birds will leave behind large quantities of it and food.

On a note! The structure can be made simply from food, combining grains into a single lump using various nutrients and hanging such a “gingerbread” in a visible place. Suitable for small birds that will peck grain from the feeder by clinging to it with their claws.

What can you make a feeder from?

You can make your own feeder from a variety of objects and materials, from an ordinary board to a plastic bottle or even a Tetra Pak box. Each material has its own advantages and disadvantages, and you need to choose what the food supply will be made from based on the presence of certain skills in working with various tools, the availability of free time, funds, as well as the goals of creating a place for eating.

Wooden feeders

The best option for creating a platform for feeding birds was and remains natural, untreated wood. This design will be closest to nature, and its neutral color and smell will not scare away birds from feeding. It is ideal if the natural bark is preserved on the boards. So when choosing a material, you can choose cuts from birch, pine, etc. You can even make a feeder from branches!

Wooden feeder is the best option

But in order to make a wooden feeder, even the simplest one, you will need certain skills and tools for working with wood.

Advice! You should not decorate a wooden feeder with various bright objects, but it can be decorated with natural materials, for example, by camouflaging the roof with twigs, pine cones, and leaves.

How to make a wooden feeder?

Let's look at how you can make the simplest feeder from wooden materials. To do this, you need to buy wooden blocks, a small piece of fiberboard, a furniture stapler, a saw, drawing supplies and a tape measure.

Step 1. You need to cut a square or rectangle from a sheet of fiberboard. You should apply a pattern of a square or rectangle of the appropriate size onto a sheet of fiberboard, and then use a saw to cut off the excess.

Step 2. Now you need to make the sides for the pallet. You need to cut two pieces of the same length from the block, equal to the side of the square or the long side of the rectangle, as well as two shorter pieces, which will be equal to the width of the square or the narrow side of the rectangle minus the thickness of the block.

Step 3. The sides need to be attached to the bottom of the feeder, which was previously made of fiberboard. The easiest way to do this is with a stapler.

Step 4. Now you need to make 4 supports for the roof of the feeder, all from the same block. They must be the same height.

Step 6. The upper parts of the supports standing on one side must be connected by crossbars cut from the same block. You should also make cuts on them at an angle of 45 degrees.

Step 7 Next it is manufactured. It is required to connect two sheets of fiberboard at an angle of 90 degrees. The connection is made using a small “ridge” bar with a length equal to the length of the slope. It is worth remembering that the roof should hang slightly over the tray of the feeder, which means that the slopes should be made taking this factor into account.

Step 8 Next, the roof needs to be fixed to its racks using the same stapler or nails. The junction of two slopes can be glued using some material that does not allow water to pass through. The feeder is ready. If desired, you can steal it with pine cones and branches.

Advice! When fixing the sides at the bottom of the feeder, they can be additionally coated with PVA glue to ensure connection not only due to the stapler staples, but also due to the glue.

Feeders with sides are the favorite of shelling birds, but for the rest, you can make a feeder without sides. The main thing is that the side is not too high.

Similar structures can be made from plywood, refusing to use fiberboard. In this case, the feeder will be more reliable and durable.

Video - Wooden feeder

Simple hanging feeders

These are very simple feeders, they can be easily and simply made in just a few minutes. They are a delicacy placed on a ribbon or in a case and hung on a tree. Often, using this principle, pieces of lard for tits are fixed on trees. You can also make balls from seeds. You can use peanut butter or suet to bind the grains together. And such feeders just need to be fixed on the tape somewhere in a place visible to the birds. To attract attention, you can try tying a sprig of rowan to such a feeder. You need to form the balls outside so that they immediately harden in the cold.

Advice! It is best to make pendants in the shape of a ball, and not in some beautiful and exotic shape. The ball is the most convenient option for birds.

Making a feeder for lard

Let's see how you can make a simple structure for placing lard, the manufacture of which will require twine, wire and an ordinary hoop - an accessory for embroiderers.

Step 1. You need to buy regular plastic hoops in the store. They need to be separated into two halves, but in the lock area the hoops should remain connected.

Step 2. In the lock area, you need to wrap the hoop with wire on both sides.

Step 3. On the other hand, where the hoop is separated, you need to make a wire jumper and wrap it with a “tail” from the wire to approximately the middle.

Step 4. The remaining wire needs to be twisted and formed into a hook at an angle of 90 degrees, which is directed inside the hoop. Lard will be placed on it.

Step 6. After this, the hoop and wire need to be wrapped with regular twine. The feeder is ready. All you have to do is place it in the right place in the garden and put a treat for the birds on the pin.

Making a feeder from a plastic bottle

Of course, you can simply cut a hole in the side of a plastic bottle and hang it on a tree, filling it with grain. But you can get creative and make the feeder a little more complicated. To do this, you will need flower trays of different diameters and a plastic bottle of approximately 1.5 liters. A strong rope will also come in handy.

Step 1. In one of the pallets (which is smaller) you need to make a hole of the same diameter as the neck of the bottle. You can cut it either with a knife or with a special crown placed on a drill.

Step 2. Next, you need to remove the cap from the plastic bottle and screw the bottle itself into the tray with its neck, and screw the cap onto the neck from below. But for now, the structure can be temporarily dismantled. A small hole should be cut in the side of the bottle so that the food can pour out of it and be accessible to the birds.

Step 3. You need to cut off the bottom of the bottle using a sharp knife.

Step 4. Now on the pallet - both on the first and on the second - you need to mark and drill holes for the rope. First you need to make holes on the smaller one, and then, placing it on the larger one, mark it and also drill holes.

Step 5. The final assembly of the structure is underway. The bottle must be screwed to the bottom tray.

Step 6. You need to cut six pieces of rope of the same length. It is better to take a rope that is tight and thick enough. You can also use a synthetic version.

Step 7 Now you need to tie a knot on each rope at the same distance from the edge.

Step 8 You need to thread the ropes through the holes on the small pallet so that the short tails of the ropes are at the bottom.

Step 9 The second pallet will become an improvised roof for the feeder. Now you need to thread the ropes through the holes of the second pallet.

Step 10 The ropes need to be well tensioned. The result should be the same design as in the figure.

Step 11 Now you need to form “tails” from the bottom and top of the remnants of the rope. Don't forget to make a hanging loop on the top side.

Step 12 All that remains is to fill the feeder with seeds and fix it on tree branches using a hanging loop.

Video - Feeder made from a large plastic bottle

Video - Hopper feeder made from a glass bottle

You can make bird feeders from any materials. You can whip up a feeding place even from cardboard, but such a feeder will not last long. If you want to decorate your garden with beautiful and durable feeding places for birds, then it is better to spend your time and make a wooden feeder.

Feeders hung on the property of a private house are not only support for birds in the cold winter, but also a beautiful decoration for the yard. Of course, when you hear the word feeder, your memory brings to mind a nondescript wooden structure, completely different from a decorative element. However, you can make an original feeder that is both comfortable for birds and pleasing to the eye.

The structure must perform its functions, and not just hang on a branch. Therefore, when creating it, you need to take into account several important nuances.
Consider what birds live in your area.
The structure must be suitable for the size of the animal. An excessively small feeder is inconvenient, but an excessively large one has its disadvantages. Other species of birds can take food from a large tit feeder.
The food must be suitable.
Place inside those types of food that are suitable for the birds that come to your garden. The food should be easy to get out; if the grains are large, the holes must be made large enough.
When decorating the product, you should not use too bright colors.
These animals see many more colors than humans. If the design is of overly saturated shades, the bird may avoid it, since it does not look like natural shades. It is better if its color imitates the plants that are usually seen on your site.
The roof and sides are important for food safety.
If snow and rain fall on it, mold may form that is dangerous to the health of the birds.
The material of the product must be strong and moisture resistant.
The better the material is selected, the longer the feeder will please the owners of the site and their feathered guests.
For the safety of your little children, you should not leave sharp edges on the structure.
The product should hang high so that birds do not become prey for cats.

Easy ways to make a feeder

Below are several options on how to easily make a bird feeder.

Coconut feeder

This option is suitable for small animals.
The contents are pulled out of the coconut, leaving only the shell.
Make one or more holes in the sides of the shell.
Attach a rope with which the structure will be attached to the branch.
Add grain and the feeder is ready.

Mesh feeder for fruits

Supermarkets often sell tangerines or apples in nets. This item will be useful for creating a feeder. Difficulties arise with placing food in it. Regular grains fall out of the mesh easily.

It is better to place peanuts or shelled walnuts in such a mesh feeder. It is advisable to place a roof made of a piece of plywood, board or plastic over the mesh.

Plastic construction

A bird feeder made from a plastic bottle is very easy to make. You just need to cut holes in the bottle and attach it to a branch, tying a wire to the neck. Using the same method, you can make a feeder from a cardboard juice or milk bag.

Wooden product

Small wooden sticks and boards are glued to each other with waterproof glue. The structure should have a bottom, sides at the edges, a roof and 4 vertical sticks holding the top and bottom together.

Vertical fastenings can be replaced with strong ropes. If you can’t fasten with glue, small screws or nails will do.

More complex designs

The ideas for decorative bird feeders are not much different from the simple options described above. Any of the listed methods is taken as a basis and decorated with elements suitable for accessories in the garden.

You can cut out and decorate elegant elements in the form of flowers or abstract decorations from plastic. Additional perches will look nice in a large wooden feeder.

To add functionality, you can attach a container with a small hole inside the structure. When the food runs out, the next portion of treats will pour out from the reserves.

Photos of bird feeders and visual instructions on how to improve them can inspire you to come up with some interesting ideas. There are many drawings on the Internet that indicate down to the centimeter the exact parameters for creating products with your own hands. They will help a creative person make a unique and useful decoration for the yard.