How to close the hole in the interior door. How to close a hole in the door: instructions, expert advice

A hole in a door can form as a result of many reasons: accidental blows, mechanical impact, or just time. However, this small misunderstanding does not mean that it will be urgent. The hole can be masked or repaired.

Disguise methods

Hole masking is an easier and cheaper way to deal with this nuisance. Depending on the style of your home interior, your personal preferences and imagination. Possible options:

1. Hang up a poster / sign. This option is suitable for a nursery or a room designed in a loose style. Today, you can find many funny posters and signs that will mask the hole and at the same time will cheer you up every day.
2. Stick on the mirror. Self-adhesive mirrors are a great and practical way to get rid of the hole. They have a small weight that can withstand any type of door, different sizes and shapes.
3. Cover with self-adhesive tape. In specialty stores you can find a huge variety of colors and textures of such films. It can only be glued to one or both sides of the door.
4. Hang the door leaf. To do this, you can use various drawings, photographs, pieces of fabric, etc. You can apply any option that will give out your imagination and allow the interior.

If the door design and your budget allows this option, you can order a stained glass window for the part of the door with a hole. Such glass can be made to order and contact a master for quality installation.

Door repair

If you do not want to change the original appearance of the door, you can repair it. Moreover, you can close the hole yourself with the help of a small expansion foam.

• Trim the jagged edges of the hole.
• Cover the interior with any material at hand (such as wrapping paper).
• Pour in polyurethane foam. After it hardens, cut off the bulging pieces.
• Cover the surface with mastic.
• Putty (you can use regular / wood putty).
• After the putty has dried (at least 12 hours), go over the surface with a zero sandpaper.
• Paint over the area with a suitable paint. You can also create a unique pattern in this place.

If a hole appears in the door, don't be discouraged. You can cope with it using ordinary tools and / or imagination.

Even with a careful attitude to the door block, some defects may appear on it. Mostly these are various scratches and chips. Judging by the numerous reviews, most owners do not pay attention to such flaws and begin restoration when the door block completely loses its original appearance. A door with a hole looks especially impartial. You can fix the situation by buying a new door. Some resort to the services of professional restorers.

There is also a category of people who are trying to repair the door block on their own. Therefore, the question of how you can close the hole in the door is quite relevant for them. With the right materials and tools, this task will not be difficult. You will find information on how to repair a hole in a wooden door in this article.

What do you need to work?

Judging by the reviews, many newbies are interested in the question of how to seal the hole in the door. Interior blocks, according to professionals, can be repaired using ordinary carpentry tools. Before proceeding with the restoration, the home craftsman should acquire the following:

• Plain paper.
• Polyurethane foam.
• Construction knife.
• Epoxy or polyester resin. You can buy it at a specialized auto shop.
• Woodworking putty.
• Spatula.
• Primer for wood.
• Special two-component paint and varnish composition and a brush.
• Sandpaper. It is desirable that its grain size is at least 150.

Having prepared everything necessary for work, beginners wonder how to close a hole in the door. Experts recommend adhering to the following sequence of actions. What should be done for what - later in the article.

Where do you start?

For those who do not know how to patch up a hole in the door and where to start, experienced craftsmen recommend preparing the hole at the very beginning. It must necessarily be slightly larger than the hole itself. At this stage, you will have to work with a special construction knife. Judging by numerous reviews, with a prepared hole, the process of sealing a defect will be much easier.

How to close a hole in a fiberboard door? Second step

At this stage, the prepared opening must be filled. For this, many home craftsmen use paper. Judging by the reviews, a good score comes from the newspaper. This procedure is performed with the sole purpose of minimizing the use of polyurethane foam as much as possible. It blows out the remaining voids in the hole in the door block. After that, the master will only have to level the surface of the door leaf. Before proceeding, you should make sure that the polyurethane foam is dry. Therefore, you can cut off the excess after a few hours. During work, you should adhere to safety precautions. It is better to restore the door with protective gloves. If part of the polyurethane foam gets on the skin, it is advisable to quickly wash it off using a solvent.

Using epoxy

Since the foam is characterized by a very porous structure, there is a risk that after restoration the treated part in the door leaf will be particularly vulnerable. How to close a hole in a door to make the surface harder? Experienced craftsmen advise using epoxy.

To do this, apply this substance to the already frozen polyurethane foam. The resin impregnates it and hardens, forming a strong crust. Protective gloves are also recommended when handling the resin. This substance is easily washed off from the skin with a solvent.

The final stage

After using polyurethane foam and resin, the surface of the door leaf should be given an aesthetic appearance. For this purpose, craftsmen use puttying technology. You will have to work with a special compound designed exclusively for wood. With the help of wood putty, all joints are hidden, so that the place of the defect after varnishing cannot even be felt. The puttying procedure is not complicated. The master needs to collect the required amount of the substance and apply it to the surface to be treated with a spatula. Then the putty is thoroughly rubbed.

According to experts, a little putty is needed to seal the hole. It is better to remove the residues immediately, until this substance is completely solidified. After it dries, the door leaf is sanded with at least 150 grit sandpaper. Then the surface is repeatedly primed. Each layer of primer must be completely dry. This will take about 20 minutes on average. Next, pre-selected paints and varnishes are applied to the door. To prevent the formation of streaks on the door leaf, experienced craftsmen advise at this stage to use a small paint brush.

Alternative option

Some beginners are interested in the question of how to seal a hole in a door without using foam? You can also fix a defect in the canvas with the help of beautiful glass containing some kind of ornament. Judging by the reviews, the door block from such a restoration will not get worse. It is also easy to fix the situation with self-adhesive mirrors 300 x 300 mm. The door will look especially impressive with wooden slats or curly borders glued along the contour.

Finally

A hole in the door is not a reason to remove the canvas and install a new one in its place. Knowing the technology of restoration, the home craftsman will be able to eliminate the flaw without the help of professionals. To whom finances do not allow to purchase a new door block, and do not want to do repairs, you can advise to cover the defect with some kind of plate or poster.

The interior door is not the last element of the interior. It is not only the color, design, material of the door that matters, but also the quality of the installation. Competent assembly and installation is half the battle.

When installing a door, different situations arise: incorrect calculation of parameters, difficulties with installation, force majeure situations. As a result, the result may not be as rosy as it seemed at first. The resulting cracks spoil the look of the room, and not everyone knows what to do with them. The article discusses the most common causes of the appearance of cracks and how to eliminate them.

It is important to consider the material from which the door and frame are made. If they are made of natural wood, then this material can dry out or swell under certain conditions.

No matter how carefully you installed the interior door in the opening, you could punch a hole or there were cracks between the box and the wall in some places. They greatly spoil the appearance, but it is not difficult to repair them. Slots and holes can be small or large, around the perimeter or in some places. How to solve the problem will depend on all these parameters.

The smoother the walls, the better the door will look after installation.

The slots spoil not only the appearance of the room, they cease to close tightly, enhance the transmission of extraneous sounds, and can play and clap in drafts. No special thermal insulation is required for interior doorstherefore this problem is not considered.

Sometimes cracks appear during operation: the previous plaster falls off, which hid the flaws in the installation.

How to close cracks and holes after installing the structure?

To eliminate defects after installing an interior door, different methods are used, among them you can even find such rare ones as finishing with decorative stone or tiles. Here, more often the owners are guided by the general characteristics of the structure, the features of the interior.

If several methods are applicable for design, then the choice is made based on financial capabilities or relying on the taste of the owner. The choice entirely depends on preferences, and the result depends on the quality of the gap filling.

Polyurethane foam

It is necessary to foam the space between the wall and the box. Do not install the interior door close to the wall, this will reduce the reliability of the structure. This gap should not exceed 2 cm.
When working with foam, it is necessary to protect the door covering and frame from its ingress, then it will be difficult to clean this material.

If the installation of the door is performed by specialists, then they themselves will fill the space with foam.

If the installation is carried out independently:

• the room should be at a temperature of +5 - +30 degrees;
• moisten the opening to be filled with water;
• the balloon is kept upside down;
• fill no more than 1/3 of the total space;
• you need to start from the bottom.

For use in the installation of interior doors, a one-component semi-professional foam is sufficient. It will dry out in a day, then the excess must be cut off with a knife, covered with putty.

Putty

After foaming the gap, the appearance of the door does not always improve. If the gaps were very small, then you don't have to do anything else, and if a little more, then the foam will spoil the whole aesthetics. Then, depending on the interior, you can choose another option.

Despite the ease of use, putty can aggressively affect the door material, and therefore you need to more carefully approach the choice of material, worry about protecting the door leaf and platbands. In a simpler version, after drying, the putty can be covered with wallpaper or painted.

Cloth or curtains

One of the most popular ideas is fabric finishing. If the gaps are small enough, you can not use putty or polyurethane foam: curtains or decorating with material will come to the rescue.

The original look of the door leaf is guaranteed, the main thing is that there are no traces of glue on the fabric, otherwise the whole look will deteriorate. It is better to overcast the edges, remove all threads that may dangle. This decoration is especially easy for patchwork lovers. The fabric looks beautiful in the interior instead of a glass door insert or as a curtain fixed with beautiful carnations or an unusual pendant.

Plastic

Plastic self-adhesive tapes will look nice. You can also use simple plastic to close the zone, but you need to attach it with something else, and the tapes simplify the laying of the material.

Attention! Plastic self-adhesive tapes wear out quickly, require periodic replacement.

Before gluing the tape, you need to clean the place of dust and debris, degrease, and it is better to glue it from top to bottom - this is more convenient. The protective paper is removed as the tape is applied. It is necessary to gently press the material to the surface for good adhesion.

You can take cheaper tapes: there is no glue base on them, then you have to apply glue yourself or fix it with nails.

Plastic slats hide flaws well, but they also require additional fastening, which will be provided by nails or screws.

How to do it yourself: instructions for embedding

In addition to these methods, silicone paste can be used to seal cracks in interior doors. It is sold in tubes, and for work you need a special pistol.

1. In order not to stain the canvas and platbands, it is necessary to treat them with Vaseline or stick masking tape.
2. Load the gun, adjust the amount of incoming material.
3. Apply the paste at an angle of 45 °, moving slowly over the surface, without unnecessary haste.
4. The door is kept closed until the material is dry, the period is indicated on the packaging or in the instructions.
5. After this time, you can open it, then remove the excess paste.

This method is simple, but gives a high quality seal. Good for rooms with high humidity, such as a bathroom or kitchen.

After all, plastic is a cheap and simple material that will suit most modern interiors. To close the cracks, a molding is applied. It is necessary to determine its size, shape and color. You can fix it with nails or glue. There is no need to perform special actions. Sometimes you can make plastic slopes:

1. install guide profiles on the prepared surface;
2. cut parts from purchased plastic with a jigsaw;
3. work starts from the side walls from the entrance and ends with a ceiling;
4. close the edges with special corner-shaped plugs;
5. with a sealant, go along all seams and joints.

The wider the slope, the better the ribbed plastic looks. Laying it should be done horizontally.

Addons have also become popular. You can attach them either to the box or to the doorway itself. They can be held by assembly glue or self-tapping screws (at the discretion of the owner), the caps can be closed with plugs or putty.

Dobors are divided:

• on ordinary ones - they resemble slats with veneer;
• telescopic or type-setting - expand the opening, similar to lining;
• combined - rather, they look like a decorative corner.

When attaching extensions, the vertical of the wall cannot have a deviation of more than 4 mmtherefore, accurate measurements must be taken.
After all the calculations of the work, you must carefully and consistently adhere to this algorithm of actions:

1. Cut the board into pieces of the desired size.
2. The box is mounted, the extensions are attached to it.
3. The resulting structure is installed in the opening.
4. Wedges are placed in the space between the walls, with which the structure is adjusted until the required position is reached.
5. The entire space between the wall and the box is foamed in three steps. Each subsequent one is applied strictly on the completely dried previous one.
6. The surface is plastered.
7. Closed with platbands.

This method allows you to make all the doors in the same style. It is important to correctly measure and install. Plus - the color of the material and the texture can be taken similar.

If you plan to use an extension, then it is better to buy a door frame with a groove, which will facilitate the installation of additional parts.

Attention

For the installation of accessories in the interior space, it is good to use liquid nails as fasteners.

There are many ways to beautifully and neatly close the cracks in the interior door. Of these, you can choose one that will be closer to the interior design, will be affordable, and will decorate the room. Any of the options described is widely used in the repair and installation of doors.

Everyone can do the repair of interior doors. To do this, you just need to arm yourself with tools and knowledge. You can repair any doors made of MDF, fiberboard and chipboard (veneered and laminated), natural wood. You can carry out a lot of manipulations with them: seal up with putty, put a patch, trim, grind and touch up.

Causes of problems

Mechanical damage occurs due to careless operation or installation:

• scratches and dents are common in families with small children;
• moving or dropping objects sometimes leads to holes in fiberboard doors.

Due to improper installation, they face the following difficulties:

• skew;
• poor adhesion;
• friction.

The tree is hygroscopic - it easily absorbs moisture and gives it away. In this regard, violation of production technology and operating conditions leads to the following unpleasant consequences:

Correction of mechanical damage

To repair minor damage to the interior door with our own hands, we need:

• putty or wax crayon;
• a piece of felt.

Small scratches and dents almost always occur after a short period of use. They are covered with a special wax pencil, which can be easily purchased on the building materials market. The color of the pencil should match the shade of the doors. The place of the embedment is rubbed with a piece of felt.

How to repair dents and chips on wooden interior doors

To seal dents on wooden products, we suggest the following: hollow out a piece of wood with a chisel exactly corresponding to the size of the dent and, having coated it with glue, apply it to the groove. The junction is pressed with a clamp if the damage is at the edge. If the patch is in the middle of the door leaf, it must be placed on a flat surface, covered with a board of a suitable size and pressed with a heavy object. The protruding areas of the patch are cleaned with a chisel and sanded with coarse and then fine sandpaper. Paint over with a suitable paint, open with varnish.

Do-it-yourself repair of an interior chipboard door

To repair damage to the surface of veneered chipboard, veneers are used, matched in color and texture. It is necessary to remove the damaged piece with a chisel and glue a new one. It is easier to repair the defect if the veneer has a tangential cut (wavy, twisted structure), then the repair is not very noticeable. With a radial cut (straight, parallel lines), it is more difficult to fix, since it is difficult to pick up the pattern. Clamp the gluing site similarly to the example above.

Restoration of holes on doors from fiberboard

Doors pierced by fiberboard can be repaired by hand by inserting a ventilation grill from the bottom of the product. If the hole has formed on top, then a tab is made of a similar material, glass, etc. A symmetrical hole is cut out, the ends of which are upholstered with wooden bars to close the void. Insert a pre-prepared wooden or MDF panel (commercially available), lay the insert and fix it with another panel from the back side, hammering in with pins.

We fix the shortcomings made with incorrect installation

1. If the door does not open well or there is friction, the excess is removed from the edge with a plane, polished, painted and varnished. The gap between the frame and the doors should be no more than 1.5 - 2 mm.
2. If the door bounces when closed, the reason may be that it rests against a quarter of the box. In this case, the door leaf or frame is trimmed. Also, the problem may lie in the installation of hinges on the door.
3. Door sagging can be repaired by placing washers on the top and bottom hinge pins.

We eliminate manufacturing defects with our own hands

1. Unstuck doors are mainly the result of unfair manufacturing and contact the manufacturer to resolve the situation. But, if he turned out to be not decent, you will have to repair it yourself. In this case, it is necessary to disassemble the product into parts, sand the entire coating down to bare wood, clean up the remnants of glue at the joints. Having smeared the joints with glue, connect the parts one by one, clamping with clamps. Then the doors are re-painted and varnished.
2. If the doors are made of damp material, subsequently in a dry room they dry out and gaps form, the door does not fit tightly to the frame or does not close at all. In this case, a strip of the required size is glued to the edge, then aligned to the size of the door leaf, polished and covered with the necessary paints and varnishes.

Often, hollow sashes are prone to impacts and other mechanical damage. This leads to the formation of scuffs, chips, and sometimes holes. Most damage can be corrected by yourself and the original beauty of the structure can be restored. To close a hole in a fiberboard door, you need a minimum of material and a few tools.

A defect on a wooden door can be corrected with your own hands. For this, it is necessary to take into account the design of the door leaf, the presence of a pattern, and the features of damage.

Materials

To fix the door, you will need the following materials:

1. putty;
2. sandpaper;
3. special paint and varnish composition;
4. epoxy or polyester resin;
5. polyurethane foam;
6. primer for wood.

You should also prepare the following tools:

• spatula of the required width;
• a brush for applying varnish;
• construction knife.

Step-by-step instruction

To close the hole, follow these instructions:

• The door is removed from its hinges and placed on a table, chairs or other flat surface.
• Use a construction knife to make a hole. They retreat a great distance from the edges and make an even cut.
• Then newspapers, paper or other materials are placed inside the canvas to give strength to the structure and reduce the consumption of polyurethane foam.
• After that, foam is poured into the sash. After complete drying, all excess is removed with a knife. The coating can be difficult to clean of foam residues, therefore it is necessary to use a solvent.

• To give the required structural strength, the hole is coated with epoxy. It is necessary to work with it in rubber gloves.
• When the resin hardens, putty is applied. After drying, the surface is sanded with fine-grain emery paper.
• At the final stage, paint and varnish materials are applied. This process is preceded by a few coats of primer on the restored area.

Repair of holes without open slots is performed as follows:

1. Use a drill and drill to make holes around the damaged area. This is necessary to evenly fill the interior space and prevent the structure from bending. The drill diameter should be slightly larger than the diameter of the foam cylinder tube.
2. The space under the crack is blown out with foam. Excess must not come out of the holes so as not to deform the doors. Possible problems at this stage are that with a lot of foam, the surface can swell. If this happens, you will have to remove the door covering along with the foam to make a single plane.
3. If the crack extends over the entire width of the canvas, the foam should be blown gently. It should fill not only the space under the crack, but also at least 8-10 cm on each side.
4. After hardening, the residues are removed with a construction knife and grinded.
5. Then putty, primer and paint coatings are applied. Each subsequent layer is applied only after the previous one has completely dried.

For those who do not have the skills to work with wood, professionals advise to mask the hole in the door leaf. The methods are as follows:

• The easiest option involves gluing a film. The selection of self-adhesive films is large enough to satisfy any customer.
• The mirror at the hole will look very interesting. You can purchase both a small product and for the entire door leaf. It should be borne in mind that the large size of the mirror will make the structure heavier. This can put pressure on the hinges.
• You can also place a poster or a collage with your photos on the door.

Do-it-yourself things look best, because in addition to the decorating effect, they additionally create coziness and comfort in the room.