Lamp made of pipes with your own hands. How to make the original PVC pipe lamp to make a lamp with your own plastic pipes

How to make a beautiful street lamp yourself? We will show you unusual and simple options how to decorate your courtyard with beautiful street lighting.

Street lamps from natural materials.

An unusual and stylish street lamp can be made in autumn of a grape vine. As a template, we will need an inflatable beach ball. Wrap a vine around the ball, fixing the crossing of the wire for the stiffness of the structure.

After our improvised ball from the vine is ready, we blow up the ball and carefully pull it out.

Inside such a ball can be placed as a sunny lamp, the same and wrap it with a LED ribbon for outdoor lighting. Such ribbons often have a color switch, then with the remote you can change the color of your street lighting.

Beautiful street lamp do it yourself.

Beautiful street lamp in the form of light flow can also be made using LED tape.

For more convenience in the garden it is better to use LED tape on solar panels.

The luminous cord is twice as well - so we have "jets of our stream". A beam made of light cord fasten inside the kettle using a large metal washer and rubbed the cord through the teller's spout.

Here is such a wonderful street lamp can decorate your entrance to the house or gazebo in the garden.

How to make a street lamp from a log.

Natural material, such as logs, is one of the most harmonious materials for the garden decor.

We apply log in the rings, making a hole in the middle. Inside, we install a transparent plastic pipe or plexiglass pipe. Add a LED tape - and a stylish gardening street lamp is ready to decorate your garden.

And from the hemp you can make a chandelier for the arbor.

This is how her noncompute design looks like.

A small hint - in order to carefully choose the middle of the stump, it can be cut in pressure, and then glitter gently.

It is just a wonderful option for a street lamp - simple and effectively.

Here is an option how to use street lights from spilles for lighting garden tracks

By installing the LED lamp inside a hollow split log, you will receive an unexpectedly spectacular result.

Unusual street lamp "drop".

Glass flask for watering colors plus old water tap - and you are a happy owner of an unusual street lamp in the form of an amazing light drop.

Glass flask can be bought in the store for indoor plants. We will still need a crane rack and a metal wire for LED tape on solar panels.

LED ribbon turn around the wire and fill it the flask.

We establish our design on the flowerbed.

And we admire our wonderful street lamp!

Street lamp from rope.

Decorate the usual street lamp can stylish round lamp label from jute rope.

The rope is well moistened by PVA glue, immersing it in the bath with glue, then wrap it with her ball.

Let's dry and blow the ball.

Collect lampshade paint.

Standard Street Lamp on Solar Batteries Raise to the desired height with a metal pipe.

Install the lamp lamp lamp. When flowers are raised on the flower bed, our lamps will look very cute.

Or you can take care of a beautiful support for our lamp.

We often meet articles described how to create unusual, but at the same time useful things for your home or apartments from unnecessary materials, which, for example, remained after repair. Also, crafts can be made of plastic bottles, disposable dishes, traffic jams, and the like. But in this article we will talk about such a material as PVC pipes that are needed according to the rules and are used in the sewage system, but now we will describe how from this material to make a useful thing, such as a lamp from PVC pipes.

From a completely simple and inexpensive material, you can create something fabulous and fantastic, here the most important thing is to have skillful hands and a rich fantasy, the rest is less than small. Thanks to these good qualities, you can create beautiful and beautiful night lights in the form of lamps.

In fact, we do not know who the first thought to this idea and created such beauty as a lamp of PVC pipes, but in our time such a needlework are engaged in people of such nationalities, like Brazilians, Argentines, Australians and Chinese, but not exception is our country Russia.

To exercise a beautiful craft, we list the materials and tools that we need during work:

1. Drill with sufficient and diverse set of nozzles that have different thickness and can still be distinguished by types of grinding, we will need abrasive grinding tips.

2. PVC pipe. When choosing, you need to take into account the size, that is, the diameter, it should be in the range from 25 to 55 centimeters. At the same time, provide a place in which your night light and the size of the pattern will be either hanging, which you will cut on the pipeline.

Wireless lamp from PVC pipe

If you do not want to spend a lot of time and efforts on the implementation of the luminaire from the pipes, then you can only work with a single drill. But if you wish, perform a volumetric and complex drawing in its composition, then for this you need to turn on the operation from small to large holes, complex rhinestones, work with the thickness of the pipe walls, removal of external layers to give volume and aesthetics and, of course, giving effect 3d some details.

Before starting the execution of patterns and rhinestones on a lightweight device, we define what size we need a lamp. The main criteria for the size of the pipe are its diameter and height. If the sizes are determined with the sizes, then proceed to the selection of templates and stencils for the desired pattern you want to portray on your device. The floral type of drawing, landscape or a banal ornament, and the like, choose your taste can be served as patterns.

The silhouette of the selected pattern is transferred to the pipe is very simple, but at the same time convenient method, at the same time it is paid to the edges from above and below. Before you start taking into account the desired hole size in the pipe diameter in order for drills to approach your ideas. A good idea can be a very simple option, for example, you do not need to draw and cut various drawings, you can simply cut a beautiful decorative lamp using drawn holes of different diameters.

A very elegant drawing is obtained when the light halftone is used in operation. This effect and quality can be obtained when the outer layer of the pipe is removed using abrasive tips, that is, PVC. The more layers you remove the greater the transparent effect and the light will be much brighter in these places than on a simple surface.

To give a lamp from PVC pipes of the 3D format effect, it is necessary to attach the parts that will perform beyond the walls of the pipe, it is necessary to begin to thinning them with the help of the most tips that were used during the impression of the light halftone, after making these works, we cut out the form using Special Building Know.

To give the aesthetics and the final effect, we take a construction hairdryer (it gives more intense heating), heating the form to the state of elasticity and bend it to the side. We leave the shape alone and wait for its cooling when it cools it will remain in the same condition in which you fucked it during heating.

Such a lamp at the end of the work can not even be painted, the natural color of the pipes (white) in the design of your home or the apartment will fit completely unhindered. But still, if you want to give a lamp color design, it does not take much time and a lot of effort, just need paint from an aerosol can.

Upon completion of work from the decorations, it costs to move to work that will answer all practical issues. So, for the craft performed, you need a very durable and stable regiment, or the basis, at your discretion, because the PVC pipe lamp should stand steadily, as it weighs a lot and in size it is rather big too.

As light in your device there may be different types of lighting with lamps. It is recommended to use energy-saving lamps, because they will not allow the walls of the lamp from PVC pipes overheat and deform at the same time a decorative shell. To give a more decorative lamp, you can use during the lighting of the garland, it will be very interesting.

Affairs are very beautiful lamps from the pipe

Volumetric luminaires made by their own hands are affected by our imagination of the magic game of light and shadow. But no less awesome is that these strikingly beautiful lamps are made from an unexpected, simple and very affordable all at the price of the material.

The use of PVC pipes, as the base for the lamp, gives broad and unusual possibilities for making. You can cut through the pipe through, can take a half, just removing the thickness of the pipe, you can make bulk compositions, carefully bending parts of the pipe.

As the author of these lamps, Ademar Rocha tells, for the manufacture of the lamp, you need a hand drill with a set of different nozzles, and a construction hairdryer, which allows you to make the desired curved shape with the cut parts of the pipe.

Drills nozzles allow you to process the edges of the bulk parts of the lamp, make the texture and surface cuts on the pipe that will create the necessary halftone in the planned light composition. All this will give the lamp a neat finished look.

Of course, our lamp is needed a rather heavy stand, which will give the stability of the vertical design.
For fire safety, it is better to use an energy-saving light bulb that heats up the minimum.

As a lamp in such a lamp, you can also use LEDs. These are not only safer, but also gives more opportunities for color backlight.
Because LEDs allow you to change the color of illumination, then your lamp can please you with green, then red and golden color. In addition, the LEDs are practically not heated.

Such a lamp, carefully made by their own hands from the ordinary pipe, will be an unexpected gift for Valentine's Day. And such a musical lamp will rate the music fan. A similar lamp can be made of overlays of two pipes of different diameters.

The surface of the lamp can be painted, and then in the off state it will be better fit into the interior of your room.
For the lamp, you can use pipes of different diameters. For example, this ceiling for a chandelier is made by a point slot from a wide PVC pipe.

Not only volumetric luminaires are beautiful, drawing the desired drawing on the pipe, and making a point on its contour on the pipe, you will get an easy-to-execution, but a wonderful beautiful lamp. Use not only through, but also translucent holes, so your lamp will be more interesting.

For a real master on all the hands of the remnants of the building material - the present treasure. He is able to create masterpieces suitable for interior decoration and useful for use in the back of the trash. Rests of plastic, plumbing fittings, plugs, metal fasteners are enough to create a beautiful and functional lamp from pipes that can be hung on the wall or use instead of a desktop lamp.

If the finished product seems to you simple, you can complicate its design, adding metal parts - pipes, bolts, nuts, feet of fittings

Independent assembly of pipe lamps

Even people who do not know the basics of Plumbing and Plastic Parts can build a product from segments of pipeline, metal and plastic parts, and the specialists engaged in commissioning communications daily will not be difficult to come up with their own, unique, interesting options. The proposed instructions are just examples of how fast and easily unnecessary materials can be turned into useful things.

Dream Plumbing - Waterpipe Lamp

For the device of household communications, polypropylene is increasingly used - durable, flexible, reliable material, not amenable to Rzavchin, performing its functions for decades. Systems are mounted instead of obsolete metal pipelines that disassemble and ejected into a landfill. Take a few we visited iron parts and make it easier from them a concise, convenient lighting device.

We will need:

1 pipe arbitrary length;
2 flanges for stands;
cross as a connecting element;
2 knees;
electrical cord with switch;
lamp (energy saving or LED);
cartridge, coupling for fixation.

If the diameter of the base is 20 mm, respectively, the remaining parts have the same section.

Strict technical, coarse lamps and cozy homemade lamps - all this is made of conventional water pipes

The assembly process is simple. We connect the knees and flanges with a cross - a stand is ready. Insert the pipe from above, then screw the coupling. We do the wires, be sure to make isolation, since the metal spends the current, screw the light bulb. Several simple manipulations - and the original lamp of water pipes is ready!

To give old details to give aesthetically attractive view, we clean all the elements of the shallow sandpaper, cover the paint for metal.

Video: Functional lamp robot from pipes and fittings

Wall lamp made of flexible metal

For a wall-mounted version, a more dynamic tubular LED lamp is needed, which can be directed to different directions, and here we will use metal-plastic products. Unlike plastic parts, they differ in strength, possess elasticity, simply put - bent.

Ability to bend and take a different form will help make a lamp unique

The base that is attached on the wall is better to make a piece of wood from a piece of wood - a pine mass, a birch blank, a fragment of thick plywood. Drill a hole in it for a flexible element. From a small bar, we pull the chassis for the cartridge, given that the mobile fragment will be attached on the other side.

Ready wall lamp from pipes - Beautiful backlight for pictures or photos

It remains to make an assembly. We insert into a metal-plastic blank (from 20 to 50 cm long) the electrical wire, pre-extended through the base, fix the cartridge and produce isolation. Fix the base on the wall, screw the LED element and enjoy the resulting effect. It remains to add that the flexible tube for the lamp can be rotated to any side, and if desired, even tie the node, if the length allows.

The cost of metal-plastic products of the middle diameter is small - from 60 to 100 rubles for the temporon meter

Video: LED plastic tube lamp

Three-gas horizontal illumination

A comfortable lamp of several movable copper tubes on a metal base can create full-fledged lighting for a small room or backlight for paintings, photos, collage or shelves with souvenirs.

To work, it takes the segments of metal pipes of the same diameter, copper bent tubes for the manufacture of horns, several tees (by the number of horns), semi-fladder (for fixing the lamp on the wall or ceiling), plugs, electrical wire and fasteners. There will also be lamps - it is better to take LED, not heating the surrounding parts and the illuminated surface.

The tool required for the assembly is in every home:

lobzik or hacksaw metal;
pliers;
screwdriver;
drill and thin drills;
insulating material;
metal paint, brush.

First you need to prepare copper tubes, then twist the base and finally collect everything into a single design. From the copper blanks of 30-40 cm long we make horns for lamps. To do this, they need to be carefully bodied so that they take the form of a smooth arc. Beware of the chances, since the corners on the tubes will spoil the appearance of the design and will prevent the manufacture of the electric pipe. Hound up compression fittings on the ends, make the wires, fix and isolate the cartridges.

Metallic segments clean, paint, after drying, twist the long puss from them. At it with the same intervals, we attach copper horns, not forgetting about the safe connection of electrical wires. Fixed with your own hands the lamp made of pipes on the wall or ceiling so that the rays cover the desired plot, screw the light bulbs and check. Design in the trendy industrial style is ready.

LED night light from plastic pipe

Plastic is easy to process, therefore there is a mass of opportunities for decorating plafoons and lampshades made from this pliable material. Openwork lamps made of plastic and polypropylene pipes are installed on the floor, on the table, use as a table lamp, night light.

Beautiful designer lamp from plastic elements and multicolored light bulbs

Forest plastic blanks, proceed to work. The best option is a diameter of at least 15 cm that the walls of the finished lampshair do not come into contact with the lamp, even if it is LED. From the tools you will need a drill with various nozzles, drills, a stationery knife, a construction hairdryer.

Operating procedure:

We prepare the base - a heavy stand with a fixed cartridge, we bring the electrical wire. A wooden bar or a design of several parts is suitable.
From the thick PVC pipe cutting cut 20-30 cm in height, process the edges - this is the future lampshade.
An image is applied to the plastic surface using the stencil - ornament, drawing, pattern.
With the help of a drill, a knife, a scalpel cut out extra parts, making cuts, sections, through holes. Some parts are leaving translucent, reducing the thickness of the material. Heat the hairdryer to bend or deformed the desired items.
Install the lamp shade on the base, turn on the lamp.

Video: Table lamp made of polypropylene pipes and fittings

White, not suitable for the bedroom or living room color of plastic can be changed to a brighter shade, painting the surface of the lamp by special acrylic paints. Ready lamps made of PVC pipes look simply magically.

For connecting elements, use threads, bolts and nuts

We take an example with designers

The use of old unnecessary things to create unique interior items has long been interested in designers, engineers, self-taught masters. Metal and plastic pipes turned out to be a comfortable material for creating various lamps, chandeliers, desktop lamps, lamps, sconces. Some of them look modern, suitable for designing work offices and rooms in the style of Hightec, others, elegant and stylish, are appropriate for the interior in the style of Modern.

Skilled carved flowers and butterflies turn a plastic pipe into an amazing decor

It is curious that the magnificent designer things that are worth a lot of money are collected from the most common building materials, which means that each of you, if desired, can create a private unique masterpiece that is not inferior to known analogues by external data or in functionality.

One of the tools to help create a comfortable setting in the house is a beautiful lamp. The stores present a large number of diverse models. The better and more beautifully the device, the more expensive it is. Therefore, many masters are decided to make lamps from pipes with their own hands. In such a process there is nothing complicated: having in stock simple details, you can make a unique design. With a special ease, such instruments will be able to plumbers.

In this article:

We collect a chandelier of pipes

The main source of light in the living rooms, in the kitchen and bedroom choose ordinary chandeliers. Diversify the design of the room and stand out on the background of familiar and friends will help the device made from infirred materials.

To assemble a lamp of polypropylene pipes and fittings, you will need the following components:

plafond with grille from an industrial lamp;
two segments of plastic pipes;
the wire;
plumbing tee and corner;
two flanges, in size, coinciding with the cartridge;
wooden bar or other base;
paint can
paper;
screwdriver and screws.

First, disassemble the ceiling, removing the grille and the cartridge if the lamp will look at your interior well with the lattice, then leave it. On the outside of the cartridge, screw the metal flange. Act care not to damage the wires.

Screw the plastic pipe to the metal flange, then consecutively attach the corner, then another segment of the pipe, the tee and, finally, finish the flange. With each new detail do not forget to stretch the wire.

Make a few such designs, and after everything is ready, you can be screwed to a wooden basis. Do not forget to bring and connect cables with the central system. The finished product can be painted in any color so that it approached the interior of the room. Do not forget to lay paper before this, so as not to get into the floor. Screw the lamp and by clicking the switch, check the performance of the PVC pipe fixture.

By eliminating the corner and extending the pipe from plastic, you can make a flooring. The main thing is to prepare a sustainable base.

Wall lamp made of flexible metal

You can independently collect wall lamps made of tap pipes with rotary lamps. To change the angle of falling light, it will be enough to rotate the lighting device in the desired side. During work, you will need:

flexible plastic pipes 20-50 cm long;
array of birch, pine or thick plywood for the base;
electrical wire;
cartridge and lamps;
lobzik;
screwdriver and screws;
caller with paint and paper;
sealant.

Based on the holes, the diameter coincide with the pipe. From a small bar, drink a place to mount the cartridge, do not forget that the metal-plastic case will be supplied on the reverse side. Start the wire through the flexible base and a wooden array or Phaneur.

Insert the metal-plastic pipe to the base and fasten it with the help of screws or glue. Fix the cartridge in the prepared bar, and the contour is insulated with a sealant. The finished design of plastic pipes is painted in a pre-selected color and after drying, we hide on the wall.

You can make or buy a beautiful floor lamp to the cartridge - then the luminaire of the pipes will look more attractive.

Cup Lamp

Let's go back to the Loft style, just now we will make a table lamp with one source of light. It is suitable for the office of the house or office. Depending on the selected light source, such a product will help either focus or relax.

Required tools and materials:

long and short nipple;
fitting (six metal corners and three tees);
six small nipples that will connect corners;
drill with a metal drill;
wire with a fork and switch;
glue;
insulating tape.

Prepare metal details, having first cleaned them from oily spi-spirits. Since the reason it will be necessary to stretch through the narrow holes, cut the switch. Screw the lamp into the cartridge and insert it into the first carbon, before it extends the wire through the part. Fasten the lighting device using glue in the project position.

In one of the tees, make a hole for the cable output. In order not to make a mistake with a drilling site, imagine how the lamp will stand.

To the central tee with the hole we screw small nipples. Connect tees with nipples and corners on the sides. This will be the basis of the product. The corner in which the cartridge is with a lamp is screwed to a long nipple, then there is a corner and a short nipple. Connect two parts of the lamp together. Do not forget to stretch the wire in advance. Insert the switch back and check the desktop lamp.

Such lighting instruments from the pipeline parts will be shown to guests and their own resourcefulness. Seeing the finished result, experience the huge joy and feeling of pride. The lamps made by their own hands will serve for a long time and will never come out of fashion.