How to beat a wide doorway. Doorway design options

When repairing small apartments with narrow corridors, the door to the kitchen is increasingly being abandoned. An open entrance allows you to visually increase the space and save space. At the same time, there remains a partition that performs the functions of zoning.

In large private houses, a beautifully finished entrance to the kitchen from the hall or living room can be a work of art and interior decoration.

A wide span can be so functional.

After dismantling the door frame, the entrance from the corridor and other adjacent rooms, such as the dining room or living room, can be decorated with various materials and different shapes. But at the same time, you need to remember a few important points.

It is forbidden:

Dismantle the door in the gasified kitchen. In this case, the claim for a fine may be from the gas service. Here the door is necessary for your own safety. Gas stoves in the kitchen were common in old-built houses; in modern apartment buildings, mostly electric ones are installed.
The expansion of the opening is a redevelopment, which entails changes in the technical documentation. Be sure to coordinate such work with the BTI and other authorized services.

It should also be taken into account that the expansion of the entrance will require the installation of a more powerful hood. Especially if the kitchen opens into the living room. Otherwise, odors will freely spread throughout the apartment.

An open doorway is a better idea if there is a corridor between the kitchen and other rooms.

Entrance to the kitchen in Khrushchev

When entering the living room, you may need not only a powerful, but also a quieter hood so as not to interfere with the rest of the guests.

Examples of the most successful design options

In the decoration of an open opening, there are practically no restrictions on the choice of materials.

It can be a design under a stone, a brick.

You can finish the span with the same materials as the walls.

You can use gypsum plaster to create a semblance of stucco.

It is necessary to take into account the possibility of caring for the surface, especially if the entrance is located next to the stove or sink.

Here are a few solutions on how to design a doorway without a door to the kitchen.

Trimmed rectangular opening

The most versatile and easiest option. After dismantling the door frame, the span to the kitchen is left the same shape.

Or they can be highlighted with plastic or wood panels, lined with wallpaper or decorative plaster. The choice of materials depends on the style of the interior.

The entrance can be framed by narrow built-in ones, as in the photo below.

in the form of an arch

Overlapping, recognizable by its graceful curve, is one of the most popular alternatives to interior doors.

The arch can be symmetrical or irregular in shape. Such unusual forms can be achieved with a drywall construction.

How to make an arch with your own hands, see the video:

For more design ideas with different materials, see the photo gallery below.

Photo gallery of ideas and design techniques (30 photos)

In classical styles, stucco molding or decorative wooden inserts and platbands in the form of a column are suitable for decoration.

Modern design welcomes simplicity in form and restraint in decorative elements.

The following materials can be used.

A rock;

Brick tile;

Brick decoration can be done using a material such as gypsum plaster;

Plastic;

Wood and MDF boards, chipboard.

Depending on the style of the kitchen, there can be both rough wooden beams and elegant platbands.

Every owner of an apartment or a private house dreams of decorating it in a stylish and original way. After all, the interior of the home speaks of the taste and life position of its owner. Unfortunately, most typical buildings are characterized by cramped rooms, so when decorating such rooms, the main goal should be to expand the space. Interroom doors visually compress the dimensions of the premises, and also create a dead zone, which is not always functional. An excellent solution for small apartments is the design of a doorway without using a door. How beautiful it is to fit such a passage into the interior with your own hands - read on.

If you want to expand the space of two adjacent rooms, or just dream of interestingly beating the layout of your house, then one of the best options for you is to create an open doorway between the rooms. Such a modern design will fit well into absolutely any interior and will be a great find for small apartments.

In this way, you should not finish the doorway leading from the bedroom to the common room, as this part of the apartment requires privacy. However, the arch, which serves as a passage from the living room to the kitchen, will add a special charm to your home.

Of course, an interior portal will not be able to 100% distinguish between neighboring rooms, however, for space zoning, it is the best fit. This finish has a lot of advantages, thanks to which, it can successfully replace a doorway with a door.

Advantages of open interior passages:

This technique will allow you to combine two rooms with different functions into one. It would be especially appropriate to decorate the entrance to the living room, library or kitchen with an arch.
With the help of open doorways, you can make the interior with the most unusual design. A huge number of finishing materials for such structures and different variations of forms will help to realize any fantasy.
Open interior passages do not need to be looked after, while door hinges need constant lubrication.
Ennobling an arch without a door structure is much cheaper than installing a modern door with an attractive appearance.
Sheathing an interior portal is quite simple. Unlike installing a door, even a person who does not have experience in finishing work will cope with such work.

Such entrance structures have only two drawbacks: the impossibility of complete privacy, and a decrease in sound and smell insulation properties. In relation to a fairly voluminous list of advantages, these disadvantages do not seem critical, but they negate the possibility of installing open portals in bathrooms and bedrooms.

Options for finishing a wide doorway

One of the main advantages of finishing interior passages without using a door is the possibility of using a variety of materials for their refinement. Due to the variety of design options for such portals, they can fit into almost any interior.

The best options for finishing interior portals:

A wide doorway can be trimmed with plastic panels. This type of finishing materials is quite cheap, but it looks attractive. Especially popular are PVC panels that have a visual resemblance to wood. Such an imitation is outwardly almost indistinguishable from natural materials, so it will be an excellent addition to interiors in a classic style. Modern designs can be decorated with an interior passageway trimmed with a bright plastic frame.
Polyurethane stucco molding is an excellent frame for luxurious classic interiors. However, do not rush to decorate portals between two small rooms in this way, as this type of decoration tends to hide free space. Polyurethane stucco molding looks very similar to its gypsum counterpart, but its weight is much lower, and the cost is not so high. Another advantage of this material is the ability to paint the doorway, decorated with it, in absolutely any color.
Artificial stone, despite its high cost, remains one of the most popular design options for a doorless interior passage. The manufacturing technology of such materials implies the possibility of obtaining absolutely any color. The perimeter of the arch is decorated with decorative stone, however, it is possible to clad a large part of the wall around the entrance element.
Clinker is a tile that imitates brickwork. Such material can be seen on the facade of the building, but it is also suitable for ennobling the doorway. Just like artificial stone, clinker is placed around the interior portal. To make this design look more interesting, the edges of the material are not cut at the same level, but left in their natural form. Especially harmoniously, artificial brick fits into the loft style.

There are other options for finishing doorways without doors, but the ones we have given are considered the most successful. Having a well-developed imagination and basic knowledge in the field of finishing work, you can decorate the interior portal in a more original way.

If you want to improve the doorway, spending a minimum of money, use a regular laminate to finish it.

It is not necessary to use expensive materials to decorate the arch. For modern interiors, the usual painting of the doorway is more appropriate.

Form of finishing the doorway without a door

The doorway differs not only in the way of finishing, this element of the interior of the room can be given absolutely any shape. In this way, you can subtly emphasize the style of interior design.

What forms of doorways without doors are:

A rectangular passage is the simplest version of an interior portal. This form of openings is the easiest to work with.
The arched passage looks original and stylish. It will perfectly complement both classic and modern interiors.
Asymmetric arches are the most unusual way to design a doorway. Such passages are not located exactly, but obliquely. Asymmetry looks most advantageous in newfangled unusual interiors.

These design options for doorways look equally good in different interiors. Before deciding on the shape of the interior portal, think carefully about whether you can bring your idea to life.

How to make a doorway without a door with your own hands

To make an open passage between the rooms with your own hands is within the power of everyone. The main thing is not to overestimate your capabilities and choose portal options that you can master the creation of.

So the conversion of an interior doorway into a simple rectangular opening without doors does not require special skills and special documents. These works involve only the dismantling of the door frame and the decorative finish of the resulting portal.

If you want to give the interior passage a different shape or even expand it, then you will have more worries. First of all, you will need to get permission from the housing authorities. Then dismantle the old finish and get rid of the extra parts of the wall. After the dismantling work is completed, you can move on to strengthening and leveling the resulting opening, as well as giving it the desired shape.

If you live in a multi-story building, then in order to dismantle part of the wall, you will need to obtain permission from the utilities. Otherwise, you may get in trouble with the law.

Finishing doorways with decorative materials is a fairly simple step. You can choose any option you like and use it according to your idea.

The original doorway without a door (video)

Doorways without doors are not a new, but rather original way of decorating interior passages. You can use it in absolutely any style of interior. Trust your taste, do not be afraid of non-standard solutions, and your interior will delight you with its individuality!

The absence of door panels in the premises is a common phenomenon, provided that this is a design move. Often, in this way, they combine the space of a kitchen room and a dining room where people eat. Here we will clearly answer the question of how to finish a doorway without a door leaf, and also find out what materials are best suited for this method of combining two separate rooms. In this case, you can do all the work yourself without the help of a specialist.

An example of finishing a doorway

Important. If you decide to abandon the standard door leaf, then you should finish the opening with high quality, otherwise all the guests will think that you have difficulties with money or taste.

Before finishing the doorway, it must first be leveled to a round or rectangular shape, this work can be done as follows:

These are the most popular ways to finish a doorway without a door.
Important. Due to the fact that the plaster mixture leaves behind a lot of dust and dirt, the most often preferred finish is from drywall sheets. Before starting work, it is extremely important to determine the goals of how you want the opening to look when the work is completed. It stood out, drawing attention to itself, or completely dissolved in the room, remaining invisible.

An example of finishing a doorway with gypsum tiles

If plaster was chosen, then after it it can be finished with a decorative stone or covered with the same material as the walls in the room. When lining a doorway with plasterboard sheets, you can attach any decor elements to the surface, since drywall sheets have an absolutely smooth surface.

A feature of drywall is its simplicity with its work, which cannot be said about the plaster mixture, where without certain skills it is almost impossible to make the surface absolutely even.

Along with this, if drywall is used, then the opening is made of absolutely any geometric shape.

The process of finishing the doorway with drywall

Important. Upon completion of the plastering work or lining the doorway with plasterboard sheets, you can proceed to the subsequent finishing only after cleaning the surface of dust and dirt, otherwise any attached elements will not last long.

Various finishing materials

How to trim a wide doorway? Often this question is faced by those who decide to completely redo the doorway, getting rid of the wooden sheet and the box.

Door trim option

In this case, you can use the following popular types of finishes:

It is worth noting that the list of suitable materials indicated earlier in the text is not final, you can finish in any style based on your taste, above we have indicated only the most common and currently available options.

Use of decorative stone material

In a particular case, you can easily use artificial or natural stone to finish the doorway. Any of these materials fits perfectly into the interior of the room where there is no door leaf. The disadvantage of natural raw materials is only in its high cost, compared with artificial counterparts, which are not inferior in quality.

An example of decorating a doorway with a decorative stone

Do-it-yourself cladding of a doorway using stone has the following advantages:

the material is fire resistant;
the stone is not susceptible to moisture;
products are durable, reliable and will last a long time;
the material is quite easy to work with;
all individual stone tiles have standard dimensions.

It is better to trim the doorway with stone in a spacious room, since the bulk of such products have dark shades, then visually the opening will seem more natural. The stone entrance is ideally combined with the presence of a fireplace in the living room.

Option to finish the opening with decorative stone

The finishing material that you have chosen must have a certain symmetry on each side of the passage being made.
Joints between stone tiles must be of the same width.
Options for finishing doorways allow the use of more massive tiles below than at the top.

The work on finishing interiors made of stone tiles begins with marking. In this case, this is the most important moment of the whole work, since the tiles must lie beautifully, symmetrically and evenly.
Important. Use a level when working with stone. In addition, it is recommended to take care that this material is not combined with wood, since in the interior they do not fit well with each other.
See in the video how to finish the doorway with a decorative stone.

Finishing with wooden MDF panels

Designs in the form of arches lend themselves remarkably to finishing with MDF panels with various wood structures. This type of panel has the following advantages:

strength and durability;
simplicity and ease in everyday care;
ease of installation.

MDF panels fit perfectly into any style of decoration of an apartment or house. This is due, first of all, to the fact that wood is a warm material.

Decoration of the doorway with MDF panels

Installation consists in the fact that dimensions are taken from the opening and ready-made parts of the future doorway are cut out of the panels. These elements are fastened extremely simply, with a hammer and nails or using a screwdriver and self-tapping screws.

Important. MDF panels are not so often used when decorating a doorway due to the lack of a wide range of colors, as well as the difficulty of manufacturing an ideally shaped arched structure.

Option for finishing the doorway with MDF panels

The use of PVC panels for the subsequent finishing of doorways

To make the doorway look the most original, the use of standard PVC plastic panels is suitable. This is due to the abundance of color shades of the material, as well as the ease of its use in any premises, rooms and other spaces. Plastic panels can often even imitate the surface of stones, while their cost is several times cheaper.

PVC panels of different colors for finishing doorways

Consider the main advantages:

Low cost compared to all other materials.
Pretty easy maintenance.
Installation is done on your own without help.
Huge selection of colors and textures.

Most often, when using PVC panels, the finish is made with color sheets that have woody warm shades. The convenience of mounting such finishing elements is that they can be easily attached to liquid nails without resorting to the use of screws, nails and cement mortar, which greatly facilitates the installation procedure, which can be done independently without much difficulty.

Important. Mounting these elements at the front door is irrelevant, since, unlike stone and wood, plastic is quite fragile and the slightest mechanical damage can lead to a crack.

To increase the space, as well as just for aesthetic purposes, door blocks are removed on interior partitions. During the redevelopment of the apartment, most often they equip a free passage between the hallway and the hall. No less popular is an opening without a door, which combines the kitchen with the living room. The expansion of space occurs due to getting rid of the dead zone reserved for opening the sash. However, redevelopment creates a new problem associated with the design of a doorway without a door, which is sometimes difficult for the owner to solve.

In the house, not every opening can be left without a door. The open passage of the bathroom or pantry will look ridiculous. The secluded area is considered to be the kitchen, bedroom and office, but there is an exception to the rule for these rooms. To organize intimacy, the openings are finished with curtains, sliding screens and other similar devices. As a result, a visual illusion of separation of rooms is created, while the space remains without a dead zone.

Open passages emphasize the integrity of the living space. All openings are made of the same shape and decorated with material similar in structure to form a single ensemble.

They get rid of the door leaf when making an opening between the kitchen and the living room, or when one of these rooms is connected to the hallway. However, it is desirable to provide visual separation at least with curtains.

If a gas stove is installed in the kitchen, for safety reasons the room will have to be fenced off with at least a sliding system.

Free passage is arranged when combining a hall or kitchen with a balcony. The process involves the simultaneous removal of the door and window frames. If an office or a small bedroom is set up on the balcony, the rooms are separated by curtains or a screen.

When we are not talking about fencing off a kitchen with a gas stove, the passage is often decorated with shelves. Curly flowers, figurines and other elements are placed on decorative shelving.

Getting rid of the door not only expands the space. Air circulates freely through open passages. Even in a small apartment in the summer it becomes fresher.

When making an opening, doors are not required in the following cases:

A modern solution for redevelopment is an interior portal that allows you to save the rectangular shape of the opening. Without a door, the passage becomes freer, and the decoration of massive decorative elements gives aesthetics.

Arched passages are popular. In an apartment with high ceilings, they prefer the classics, equipping the opening with a semicircular configuration. For a building with low ceilings, it is desirable to visually raise the walls with an elliptical arch.

The door block is abandoned by owners who like irregularly configured aisles. When decorating, asymmetric arches, triangles, trapeziums are in demand. A rectangular portal looks beautiful, the corners of which are rounded at different radii. The only negative is the limitation of the passage size. It will not work to make an opening if its width is less than 80 cm.

Doors are abandoned when decorating the passage with a bar counter, stained glass elements, and mosaic fragments. Often such techniques are appropriate for studio apartments.

Advantages and disadvantages

If you compare a beautifully designed open opening with a door block, you will be able to identify a number of advantages:

The integrity of the space of the combined rooms is created. The apartment becomes free, bright, while maintaining the functionality of each zone. The kitchen remains the kitchen, the living room remains the living room.
When framing the doorway, materials that do not require complex maintenance are used. The absence of a sash eliminates the loosening of the box, the formation of a dead zone.
Without a door leaf, the opening can be given an original configuration that allows you to emphasize the style of the interior of the entire room.
Making an interior portal even with the most expensive materials will turn out to be more cost-effective than installing a high-quality door block.

The disadvantage of an open passage is the impossibility of using it for and a pantry. With any type of design, a passage without a door is not able to provide the intimacy of a specific purpose area.

Free ventilation through open openings will bring great inconvenience when combining the kitchen with living rooms. Smells during cooking, along with fat vapors, will spread throughout the apartment.

Forms

You can design the opening while maintaining the original configuration or modify the passage. Often the shape of the structure depends on the materials used for finishing. An important role is played by the skill of the master.

Of all types of doorways, the simplest option is the classic rectangular shape. To assemble such a structure is within the power of an inexperienced person. To design the opening, the entire door block is removed along with the frame. The ends of the walls along the contour are trimmed with decorative cladding. If it is difficult to dismantle the boat, only one leaf can be removed. Sheathe the remaining elements of the frame with MDF or plastic. The disadvantage of this method is the narrowing of the doorway due to the remaining elements of the box.

In the case of arched openings choice of forms huge:

Considered a classic semicircular arch. The transition is suitable for combining any rooms. If the apartment has low ceilings, it is better to refuse a semicircular arch or expand the passage.

arches trapezoidal forms are easier to manufacture, suitable for apartments with low ceilings, often installed when combining a kitchen with a living room. However, designers rarely use a trapezoid due to its association with the shape of ritual accessories.

Fans of unusual configurations prefer triangular arches. The design has many subspecies, more suitable for spacious rooms with high ceilings.

Modern apartments are increasingly equipped with doorways asymmetric forms. The design is easier to make from drywall. For decoration, LED lighting is used, niches, shelves and other decorative elements are equipped. Asymmetric designs allow you to hide large defects in the passage and the interior partition itself.

How to decorate a doorway?

When making an opening without a door, almost any material used for wall decoration is suitable. A budget option is a drywall construction, followed by painting or wallpapering. It is optimal to choose a GKL in the manufacture of an asymmetric device. Plastic or MDF will be cheap.

Of the more expensive materials for decorating the doorway, artificial stone, tile, and precious woods are used. The pinnacle of art is the decoration of the passage with stucco.

When choosing the option of finishing a doorway without a door, one must take into account the style of the entire room. The design should harmoniously fit the passage into the interior, and not highlight it as a separate design.

The portal in the apartment is equipped with two types: full - with a top and side elements, two-sided - only side faces without a top. Similarly, they provide for the installation of a threshold and platbands or refuse these elements.

Installation of slopes and plasterboard arches

If you decide to arrange a doorway without a door with your own hands in the form of an arch, it is better to use drywall for decoration. Sheets are inexpensive, easy to cut and install. In the manufacture of the arch, a frame is assembled from a galvanized profile. The structures give the shape of the future opening. The frame is sheathed with fragments cut from GKL sheets. Fixation takes place with self-tapping screws. The finished arch is treated with a primer, a perforated corner is glued, puttied, and after drying it is sanded.

If there is no desire to build an arch, the slopes are simply lined with drywall. To further refine the doorway, water-based paint is used or wallpaper is glued.

How to trim a doorway with stone?

The decoration of the portal with a decorative stone looks stylish. The material is made of natural crumbs with the addition of coloring pigments and polymers. When framing an opening, they rarely adhere to even boundaries. Most often, preference is given to torn edges. To aesthetically decorate the doorway inside the room, use a stone with a small, almost smooth relief pattern. Elements with a deep texture create a bulky design. They are used to finish the openings of the entrance doors from the side of the street.

Decorative stone cuts well, but for corners it is better to use ready-made corner elements. Installation is carried out with an adhesive solution for tiles or liquid nails.

Finishing with dobors and platbands

Simply and tastefully, it will turn out to finish the rectangular doorway and made in the form of planks. Elements are made of wood, MDF or plastic. The latter look less aesthetically pleasing.

From MDF there are ordinary ones, with an edge at the end and telescopic ones. In the first version, the edge of the plank is without a decorative coating. Joints need to be tight. Edge trims have a finished look. The end is sealed with a decorative film and in case of flaws, the joints look presentable.

They produce flat, rounded and other shapes. Wooden planks can be decorated with carvings. Installation of elements is carried out on glue, nails or self-tapping screws. Telescopic architraves are fixed with a lock to a pre-fixed bar.

Finishing the interior opening MDF

MDF panels will turn out to be a beautiful and inexpensive finish of the portal, only platbands are still selected from a similar material. The disadvantage of facing is the fear of dampness. It is better not to use MDF for decorating the passage connecting the kitchen with the living room. If a good exhaust system is organized above the oven, then dampness does not threaten the material.

To sheathe an MDF doorway, first a frame is constructed from wooden slats. The panels are cut to size and fixed with special metal clips. Between themselves, the planks are joined with a tongue-and-groove locking connection.

MDF panels without locks are planted on adhesive solutions. The frame is not built. For gluing the planks, a perfectly flat surface is prepared. The joints are closed with a decorative strip, and the edges of the passage are framed with platbands.

Decorating a doorway with plastic

The principle of ennobling the opening with plastic is reminiscent of finishing with MDF panels. Only the material is different. PVC plastic panels are fixed to the frame with fastening clips or glued. The frame is completed by a trim made of a similar material, which is attached to the guide bar.

PVC panels trim the doorway of a rectangular, semicircular and other configuration. Ready-made kits for lining arches are sold in stores, you just need to choose the product according to the size of the passage.

Advantages of polyurethane stucco

Gypsum stucco is rarely used because of its fragility and heavy weight. If the apartment has high ceilings, and a Venetian or other similar style is chosen for decoration, then the decoration of doorways is carried out with polyurethane elements. The material is not fragile, light, can be painted.

For the installation of such stucco, a flat, durable surface is prepared. Pre-treatment with a deep penetration primer. The elements are fixed with an adhesive mixture. After the glue has hardened, the joints are puttied and then sanded with sandpaper.

wood finish

Lovers of natural materials prefer a wooden portal lined with trims and platbands. When making a door portal with your own hands, you can even use cheap pine wood. After good polishing, treatment with protective impregnations and varnishing, the material will be difficult to distinguish from valuable wood. You can decorate the wooden portal of the doorway with a carved ornament.

The elements are being installed on the frame. First, flat planks are fixed to the slopes, then trims are installed. The facing of the doorway is fixed with self-tapping screws. Hats are recessed in drilled secret holes, and rubbed with putty on top. I glue the platbands, fix them with nails or self-tapping screws.

curtain decoration

A simple option to decorate doorways without a door is to hang curtains. The whole process consists in fixing the cornice over the passage. Curtains will hide the opening without a door from the field of view, divert attention, do not clutter up the space. The main requirement is not to use curtains with horizontal opening. They will become an obstacle in the free passage. It is optimal to use curtains for doorways with vertical closing. When open, the curtains are tied to the wall.

If you make every effort, decorating a free interior passage will turn out better than a door block. If expensive materials are used, it is advisable to take the advice of specialists so that the costs are not in vain.

During the repair work, the owners may face a dilemma - whether to install or is it better to replace them with a more modern design option, for example, an arch. By removing the doors, you can solve several problems at once: decorate your home and save free space. Therefore, most people make a choice in favor of alternative options. Let's figure out how to decorate a doorway beautifully and effortlessly, in the main pros and cons of the existing ways of decorating passages between rooms, as well as the appropriateness of such redevelopment in various situations.

When are interior doors not required?

Interior opening can be varied

The answer to this question largely depends on the functional purpose of the premises that are planned to be combined, and the individual characteristics of housing. Often the passage between the kitchen and the living room undergoes alteration. Such a redevelopment makes sense if the kitchen area is small. At the same time, the dining area can be moved to the room, freeing up useful kitchen space.

No less relevant will be the replacement of the door with an arch or another design option for the opening, and if a balcony is attached to one of the rooms. This will ensure a smooth transition between them, and the two rooms will merge into one, which will visually enlarge the room.

It will also look good to have a passage designed in the form of a portal, if there is a small dressing room located between the front door and the corridor. But to make such an entrance to the bedroom, even if it is draped with curtains, is hardly appropriate.

Possible finishes

So, if you decide that the layout of your home allows you to refresh the interior by changing the look of the doorways, then first you should learn more about the existing varieties of such finishes. Consider some of the most popular ways to decorate the passage between rooms.

Arches in the doorway. What are they?

Arch

Installing an arch in a doorway is one of the most popular ways to design an entrance to a room. It can be done in several variations:

Oval. Such an arch is considered standard and has a rounded shape. To create it, you will need to round the corners of the opening with drywall and a metal frame.
Rectangle. The most easily implemented option that does not require the installation of additional structures.
complex forms. Giving the doorway a more exotic look is impossible without installing a complex plasterboard structure and, most likely, will require the involvement of builders-finishers.
Imitation. This type of arch is relevant if the door structure is of considerable size and does not look very nice in a rectangular form. To give such a passage a rounded shape, semicircular segments are installed at its corners.

All types of arches, except for unusual shapes, are quite simple to implement. However, there is a minus - they can not be installed in any room, because a considerable ceiling height is required for the arrangement. Therefore, for those who are not very lucky with this parameter, it is better to choose a different decor option.

Stone decoration is always in fashion

A bright accent in the interior will be a doorway painted in contrasting colors or highlighted with various facing materials. And stone decoration for this purpose is one of the best solutions. Stone for decoration can be used both natural and artificial. The first is used less frequently due to its high cost and less ease of installation and operation.

stone finish

Installation of natural stone is not an easy process, and it is better to entrust it to professionals. But it is quite possible to handle the facing with artificial stone-like panels on your own by fixing them with tile glue. At the same time, in appearance, they will practically not be inferior to the real material.

Note! In order for the stone finish to harmonize with the rest of the interior, it is worth placing objects in the room with elements of a similar material, for example, a framed mirror, shelves, wall panels or fake fireplace.

Stucco decoration: beautiful and practical

When decorating doorways, polyurethane stucco molding is also very popular. It has many advantages: it is easy to attach, durable enough, besides, initially having a white color, it lends itself well to painting.

But, when deciding on the design of this material, you need to remember that it often looks very cumbersome. Therefore, if the rooms are small, it makes sense to choose not embossed, but flat elements, so as not to visually overload the room.

Curtains in the doorway: an affordable solution

Curtains are the perfect solution!

Drapery with curtains is another way to ennoble a doorway. The advantage of this type of design is that it not only allows you to emphasize the passage between the rooms, but also, if necessary, hide it. The advantages also include ease of attachment, affordability and a wide selection of colors and materials.

Curtains in the doorway can be both fabric and in the form of "pendants". Ordinary traditional curtains can be used as fabric curtains, but it is better to purchase products specially designed for this purpose.

The so-called "pendants" for decorating doors are used more often. They can cover the entire opening or have the form of a frame. The material for their manufacture is wood, plastic, bamboo, various cords, beads, etc. If you wish, you can easily make such a decoration with your own hands.

Video on creating a door arch with your own hands

In this section, we suggest that you familiarize yourself with the features of installing and decorating a door arch with your own hands. The video will help you understand all the nuances of this case.

Photo of interiors with an interesting decor of the door space

As you can see, there are many options for designing a doorway. We have described only a part of them, but in reality there are many more of them, and anyone who decides to replace a boring and standard door structure with something more original will be able to find a solution to their liking. The photos below will help you make a choice and get some interesting ideas.

Arches continue to hold the palm of leadership among the decorative finishes of doorways. This is not surprising, because in addition to the classic rounded shape, there are many other variations. For example, after performing a small redevelopment and expanding the entrance to the room, you can install an arch with niches or shelves. It will not only add variety to the interior, but can also serve as a stand for indoor plants, your photos or souvenirs.

Those who like minimalism can opt for a simple but original arch in the shape of a circle.

For lovers of luxury, this way of decorating doors also opens up a lot of opportunities. The arch, finished with polyurethane stucco, will turn your home into a real palace.

Do not forget about the curtains. Such curtains made of bamboo will perfectly fit into the interior, decorated in ethnic style.

Another original option is thread curtains. They look very gentle, but at the same time bright, and a variety of colors allows you to choose curtains that are ideal for your home.