Holder for open end wrenches. DIY wrench holder

Garage space is often combined with a workshop. The tool storage system in the garage should be thoughtful. Finished structures GOSNITI are considered optimal.

A home craftsman who wants to save money will need improvised materials. Complex mechanisms equipped with movable elements, it is forbidden just store.

To make the correct placement of the tool in the garage and clean up, there are the following options storage organization:

• on shelves;
• on the shelves;
• in cabinets;
• on stands;
• on shields.

There are shelves of various modifications:

• hinged;
• closed;
• stationary;
• mobile.

Various materials are used for their manufacture, such as metal or tree. Small parts require hanging shelves. They are usually located at the level of the chin of the owner of the garage. If the inventory has to use often, would be better for him. open structures, and in the closed store unnecessary things.

See how you can make an interesting do-it-yourself garage tool storage option:

The direct competitors of mobile shelves are movable boxes. The device has specialized containers for tools.

Factory tool racks in the garage are made in accordance with GOST. These ergonomic designs are easy to make with your own hands. To store large aggregates or tires, you will need large shelving.

If you want to make a tool cabinet in the garage with your own hands, then there should be special drawers or bags. This storage allows to avoid dust ingress. You can also rationally use side walls. With the help of special tool mounts in the garage, a place is equipped for fixing the planer. Can be placed on doors rubber hose holders.

A skilled craftsman will make a do-it-yourself tool stand in the garage. The material for its manufacture is chipboard sheet. Additionally used as tool holders canned metal cans.

How to store tools in the garage?

A convenient place to store shield, or storage panel, or simply tool board in the garage. Screwdrivers, wrenches, pliers are fixed on them. To make a do-it-yourself tool shield in the garage, use an array of boards and strong hooks. The configuration depends on the personal preferences of the master.

How to place the tool in the garage on the wall - photo:

As you can see in the photo, storing a tool in a garage with your own hands is not at all difficult to organize. All you need is desire and a little patience.

Storage of keys with tools on the wall of the garage

How to fix the tool on the wall in the garage? The optimal tool storage system in the garage involves the use of the entire area of ​​the wall.

1. After installing the horizontal guides, they are hung on them. section-shelves. Small things like nails and screws can be put in plastic jars that have had mayonnaise or horseradish. Their lids are screwed to the shelves.
2. Can be made for nuts, washers, scissors and keys stand in the garage by hand. Special loops make wire. Washers with nuts are strung on the split ends, and the dimensions of the fittings are indicated on cardboard labels. Scissors with keys are hung on metal hooks.
3. For drills, cutters and storing keys in the garage, attach to the wall foam pad. They are firmly fixed in the elastic material and can be easily removed from it if necessary.
4. Another method of attaching tools in the garage is disposable plastic plates. If you cut them into two equal parts, you get blanks. Then they are attached to the wall with self-tapping screws. The resulting pockets are used to store saw blades or grinding wheels.
5. For storage of clamps it is recommended to use rectangular plywood box. It is attached to the wall and after that the handles of the clamps are placed in it.
6. Sturdy wall mounts are designed to store bicycles. Their base must be metal.
7. In order not to lose a screwdriver of the right size, they are used for storage magnetic holder. Then they are always visible.
8. From hooks with paper clips, the craftsman will quickly make fixture for cloths intended for tape plates.

A convenient option for a panel for storing tools in the garage, which does not take up much space:

Perforated panels are necessary for the organization of work in the garage, workshops and car service. They successfully complement bedside tables with shelving in order to achieve the best ergonomics in the workplace. If you place the tool that is used most often above the workbench, then you no longer have to rummage through the drawers in search of the right things. Just as quickly and conveniently, technical equipment is hung back after use. At the same time, at the end of the working day, it is visually clear that since the hook is empty, it means that the key was lost or remained, for example, in the car during the repair process. We need to find it and hang it back. We recommend using perforation, even if the rig is stored in a nightstand. During the repair, when you change various devices, a mess is involuntarily created on the countertop. If everything you work with is hung on hangers, the surface is freed from unnecessary items. Hanging the key is much more convenient and faster than constantly laying out fixtures in boxes. On the holders is placed not only the tool, but also consumables. So, for example, in the case of work related to electrics, all kinds of terminals, cambric, electrical tape are hung, and when doing embroidery, it is very convenient to store a set of threads on the panel. Doing your favorite hobby brings more pleasure, manual labor brings additional comfort when the workplace is in order.

The perforated shield can be installed on or attached to the wall with self-tapping screws. Especially for this, its dimensions correspond to the length of pedestalless, one-pedestal and two-pedestal models. The screen is attached to the table with special stands and brackets. It is possible to install one or two panels. The cutouts on the panel flanging are made in such a way that it can be hung horizontally and vertically, which helps to optimally fill the area, bypassing the existing communications and relief.
Wall mounting is quite simple. On the back side there are 4 curly cutouts. 4 screws are screwed in, and then the panel is hung on them like a wall clock. You can make markings before drilling with any thin, sharp nail or awl on the front side.
The pitch of the holes is 15mm. This allows you to fill the shield with the necessary tool as completely as possible. The distance between centers is 30mm. Diameter of openings of the punched screen - 5 mm. For screwdrivers, grips, and other small items, there are special . Wall perforationThis model is used to accommodate heavy things.
Products are painted with a polymer coating that is immune to temperature changes and the effects of aggressive substances.

Many thematic forums on the Internet are full of reports on how to clean up with a perforated panel. With us, your wish will come true. We will help you solve specific problems.

Perforation loads

Perforated panel length		1000mm	1390mm	1900mm
Perforation hung on the wall	Series "Standard"	68kg	60kg	60kg
	Series "Light"	55kg	50kg	50kg
If the perforations are mounted on brackets on a workbench, the distributed load is 100 kg.

A handy DIY wall tool holder will be appreciated by any man. Such a device allows you not only to keep all the tools in sight and at the same time at hand, but also to keep them in order, while freeing up all work surfaces. How to make a similar magnetic board for your workshop or garage yourself, further in the step-by-step instructions.

materials

For work you will need:

• boards;
• hot glue sticks;
• screws-hooks;
• thermal gun;
• sharp knife;
• magnets;
• the instruments themselves.

Step 1. First, take measurements from the wall and determine the dimensions of the boards, which will be the basis of the holder.

Step 2. Adjust the boards to the parameters you indicated and sand the saw cuts.

Step 3. Lay the boards out on your work surface. Get your magnets and tools ready.

Step 4. Conduct a rough fitting of where, how and what tools will be attached to the board. They should be located at a distance from each other so that during work, when taking any of them, you do not cling to the neighboring ones with your hand. Consider mounting options for each tool.

Step 5. Mark the magnet attachment points with a pencil. Attach magnets to hot glue.

Step 6. If everything is clear with small magnets for oversized and light tools, then you can take such a long strip of magnets to fasten a number of screwdrivers.

Step 7. To attach stationery knives in a plastic case, you will have to glue a small piece of magnets to them as well. Otherwise, the knives will not stay on the board.

Step 8. If you have tools whose metal can scratch the holder and seriously ruin the appearance of the board over time, such as this caliper, attach a piece of heat shrink tubing over the magnet. Take the magnet itself more powerfully.

Step 9. To attach a mini-spotlight, which is used during soldering or other small work, put its base on a metal plate and screw it to the board with screws.

Step 10. Attach a set of drills and bits to hooks for convenience. When purchasing them, pay attention to models whose fastening ends are similar to self-tapping screws.

Step 11. Place a long flat metal ruler on several small magnets at once, placing them at a short distance from each other.

Step 12. A saw with an aluminum handle is a little more difficult to secure, as aluminum is less magnetic. To do this, you will have to slightly modify the saw by riveting a metal part onto it.

Step 13. To hold heavy screwdrivers on a vertical board, attach them to neodymium magnets or pieces of magnetic disks. They are much more powerful than usual, and will cope with this task.

Recently, perforated panels intended for storing tools have firmly come into use in various workshops. With their help, you can conveniently and compactly arrange any working tool in production or in a car repair shop. Also called cabinets or layouts, perforated panels have a design and functionality that allows you to equip storage for any need. They can be made from various materials and complemented by comfortable layouts.

Perforated panels - description and materials

The panel is a sheet of wood-shaving material or metal with stiffeners along the edges and perforations on the working plane. These holes allow you to conveniently place and use comfortably tools, small equipment, building materials.

Perforated layouts allow you to save your workplace, keep the necessary tools always at hand and control their availability. A workshop equipped with such panels will have a modern look, and various working devices will always be at hand.

Perforated sheets are attached to special brackets, and tools are placed on them using holders, shelves and hooks. However, on sale you can find panel cabinets that are mounted without any fasteners.

Perforated sheet sizes:

1. On average, the height of such products is 200 centimeters, and the width is 100 centimeters. Sheets with large dimensions can be produced for various workshops and garages. Their width can exceed more than two meters.
2. The minimum layout size is 50 centimeters wide and 100 centimeters high.
3. The thickness of chipboard sheets can be up to 7 centimeters, and metal - from 1 millimeter.
4. The perforation diameter is 5 mm and the distance between the holes is 15 mm. This allows you to fill the panel as tightly as possible and at the same time conveniently arrange everything.
5. The step between the hook attachment centers is 30 millimeters.

However, we must remember that the dimensions are calculated according to the overall dimensions of the product, while the working surface itself most often has rather modest dimensions. That is, with a structure height of 150 centimeters, the used perforated surface may account for only 50 or 100 centimeters.

The building materials market offers many different sizes of panels, so there is plenty to choose from for arranging any workplace.

The areas of application of perforated layouts are unlimited, however, for each case, you should select product with certain characteristics:

• durable metal structures are well suited for professional workshops;
• small sheets will come in handy in the backyard or garage;
• multifunctional layouts in the form of screens and modules are widely used in production and industry;
• products with various additions have found their application in the arrangement of shop windows in hardware stores.

Affordable tool storage racks are easy to install and easy to use.

Advantages of metal products:

Most often perforated panels in two colors. They can be white or natural wood.

The disadvantages of metal layouts include:

1. Mandatory fastening for fixing a sheet of horizontal rails.
2. Compared to MDF models, the price is quite high.

Perforated chipboard panels

When choosing layouts from MDF, it should be borne in mind that in conditions of increased use they are not able to provide adequate wear resistance.

Due to the low strength of the material, tool storage products are made in small formats. Their standard size is 60x60 centimeters. Such layouts are strong enough, do not deform or bend. In addition, they are easy to transport and install in the right place.

Perforated MDF panels are designed to store only oversized tools. With their help, you can conveniently place and operate hammers, wrenches, screwdrivers, etc. At the same time, when choosing such products for your workplace, you must remember that at high humidity and high temperatures their service life will not be long.

Fittings for perforated panels

It rarely happens that only a sheet with holes is enough to contain the instrument. Therefore, most often perforated layouts are sold complete with various holders and mounts.

Mounting methods for perforated layouts

Panels can be placed on various surfaces.

wall sheets are the most popular type of design. They are fixed directly to the wall and fastened with special screws. With the help of such layouts, you can save space and, at the same time, comfortably use the working tool.

Perforated panels for locksmith workbench are made according to the length of the unit. Their size can be matched to a double-pedestal, single-pedestal or bastum workbench. The structures are fastened with the help of special brackets and racks. In addition, two panels can be installed on the workbench at once.

In the middle of the room you can place modular screens or systems. They will also perform the function of zoning.

Rear layouts can be conveniently positioned on pipe racks or other appropriate profiles.

It is worth noting that the placement of various additional elements depends on where and with what the panel is installed.

Varieties of perforated panels

Layouts with decorative effect

HDF perforated sheets are produced from solid fibreboard to provide an aesthetic effect. With their help, you can mask some interior items, as well as divide the room into separate zones.

Such structures differ strength and decorative. Phenol is not used in their manufacture, so they are environmentally friendly. Wood-fiber material is able to cope with wet and any temperature effects, so layouts made from it can be installed in almost any room.

Sometimes it is necessary to move or transfer sheets of equipment to another location or room. The most convenient way to do this is with the help of special mobile layouts equipped with rollers or wheels.

No matter how large the garage is, the problem of compact placement of all the equipment necessary for the household is always relevant. Storing the tool on the wall will help in many ways to solve the issue of limited space - so the right one will be at hand, and useful meters will not be used in vain. By organizing a tool storage system on the wall, you can solve many problems overnight. Each type of repair gear must be placed separately, this will further facilitate the search for a particular item. Next, let's get acquainted with the most popular and simple ideas for mounting the tool on the wall.

Organizers from cans for tools on the wall

If you don’t throw away canned food cans for some time, then you can build a wonderful organizer for storing tools on the wall with your own hands. Pliers, secateurs, scissors, brushes will be organically and conveniently placed in tins attached to the walls of the garage. Such a simple idea will allow you to use the space of the workshop to the maximum and keep all the necessary tools at hand.

Screwdriver holder

A screwdriver is a very useful household item. But finding it becomes a frequent problem, since it is small and inconspicuous. So that all screwdrivers are at hand, and the efforts to find the item of the desired model are minimized, you can build a holder. To do this, just drill holes in a wooden block and attach it to the wall.

Shelf with saw cuts for tools

Drills, jigsaws and screwdrivers love no less order than any other household assistant. It is convenient to store them on a shelf with sawn holes.

garden tools

How to hang tools on the wall in the garage? Nobody wants to step on the same rake day after day, however, if they lie anywhere in the garage, this will happen more than once. A smart solution would be to remove them from the aisle and securely attach them to the wall. Holders cut from an ordinary PVC pipe can help with this.

Shelving with containers

Useful little things are conveniently placed in containers on the shelves. You can use pallets to build a rack, you may have left them after building a garage or house.

Important! If you want the rack to be more mobile, you can attach wheels to it.

Organizer for small parts:

• Small useful things, such as screws, nuts and nails, are conveniently stored in bottles or jars made of transparent plastic. In order to save space on the shelves, the containers can be attached to a hanging holder.

Important! The place of attachment is more profitable to make on the lid of the container.

• Empty cropped cans can also be used to store the same tools.

Important! In order not to look for the necessary parts for a long time, it is better to mark the containers.

Storing band saws

It is dangerous to store bandsaw blades rolled into a ring, because in the process of unrolling them, you can get serious injury or injury. To safely store such tools on the wall, office clips can be used. With the help of them, a sharp canvas is fixed, hung on a hook or placed on a shelf.

How convenient to store drills and keys?

Another type of small household utility are various keys and drills. The tool mount on the wall can be made from magnetic tape. Thus, the drills will not get lost and will always be in order.

Tape storage:

• It is very convenient to store adhesive tape or electrical tape in a box with a metal strip distributor. This way you can easily tear off the required amount of tape without losing its ends for convenient later use.
• Another convenient method for storing duct tape is to use a coat hanger. By cutting the bottom of the hanger, you can hang some tape and tape on it. The hanger itself can be hung on a hook driven into the bottom of the rack shelf.

Almost every man has a set of tools in his house or garage. Therefore, it is worth keeping them in perfect order. How best to do this, a new review will tell. Surely everyone will be able to find in it examples of the organization of the storage place that interested him.

1. Plastic cans

Cropped canisters are perfect for storing nails, screws, bolts and nuts. And in order not to dig for a long time in search of the necessary, it is better to mark the containers.

2. Wooden shelf

A narrow wooden shelf with holes is a great place to store screwdrivers.

3. Stand

To prevent pliers from being scattered throughout the garage, make a special wooden stand for them.

4. Railing

A thin metal rod is perfect for hanging paint brushes.

5. Individual cells

From the remnants of PVC pipes, you can make convenient cells for the careful storage of small power tools.

6. Wooden rack

A homemade wooden rack for storing wrenches will allow you to forget about the mess and tedious search for the right tool forever.

7. Open locker

An open wooden cabinet is the best place to store spray paints, which are most often randomly scattered in the garage.

8. Mobile stand

A small stand on wheels is perfect for storing hand tools. This rack is very compact and will always have the right tool at hand.

9. Wooden stand

Stylish wooden stand with a shelf, which is suitable for storing a wide variety of tools. Such a product will help not only to streamline hand tools, but will also become a real decoration for the men's monastery.

10. Homemade rack

An unnecessary pallet can be turned into a convenient stand for storing garden tools, which often take up a lot of space in the garage.

11. Hanger

A simple wooden block with metal hooks will solve the problem of storing power tools forever.

12. Hangers for clothes

Simple manipulations with an ordinary clothes hanger will allow you to turn it into a convenient organizer for storing electrical tape and adhesive tape.

13. Storage system

Pitchforks, shovels, rakes and other garden tools are not very stable and also take up a lot of space in the garage. Reliable wooden hooks on the walls will help you correctly place garden tools along the walls of the garage or shed.

14. Folding table

A homemade wooden folding table and wall-mounted storage rack for hand tools is a terrific idea for small garage owners.

15. Glass jars

Ordinary glass jars with metal lids are perfect for storing various small things. For greater convenience and reliability, the lids of the cans should be screwed to the shelves.

16. Vertical storage

The usual average garage looks very cluttered. The competent organization of storage systems will help to solve this problem. Instead of another closet, equip the walls with various shelves and hooks, which will allow you to neatly place a variety of things, from tools to a huge boat and bicycles.

17. Magnets

Magnetic tape or separate small magnets are a great idea for storing screwdriver bits, drill bits, and other small metal parts.

In continuation of the topic, we will talk about anywhere.

Who hasn't felt annoyed when looking for this or that wrench in the locker's workbench drawer or special box, where they are usually located in a chaotic mess? There is an opportunity not to spoil your mood, improve the culture of your work and not waste time looking for the right tool.
To do this, it is enough to acquire a suitable wooden beam, for the processing of which you will need some simple tools. The entire job will take approximately one hour to complete. With this simple yet effective open end wrench holder, you won't have to swear looking for the right wrench you need.

Required Tools

In order for the work to go smoothly, and not to require too much physical effort, I propose the following set of tools (of course, they can be replaced by others, in particular, manual ones, the main thing is the high-quality performance of the corresponding operations):

• electric jigsaw;
• belt grinder (grinder);
• desktop drilling machine;
• mechanical cutter;
• manual screwdriver;
• metal ruler and pencil;
• protractor-ruler for drawing inclined parallel lines.

Required Materials

In order for the fixture to last longer, a beam of the appropriate section must be made of hardwood: birch, oak, maple, ash, elm, etc. You will also need two cambric or plastic inserts and two suitable screws of comparable sizes.
In principle, the wrench holder can be soaked in oil, varnished or simply painted with any oil paint. This will give them more strength and improve their appearance, which is also important in our aesthetic age.

Manufacturing process

We begin the work by cutting out a blank for the future wrench holder on an electric jigsaw from a wooden beam or thick board suitable for the section and length.

Then we process all the edges of the workpiece on a belt grinder, which is also called a grinder. For the back side of the workpiece, this is the final operation, so it must be performed with sufficient quality.

Now you can start marking the wooden beam.

To do this, along its narrow side, using a metal ruler and a simple pencil, we draw a line in the center along the entire length of the workpiece. Then we make marks at an equal distance on the drawn line every 25 mm. These are the centers of drilling through holes - the lower bases of the key sockets.
We drill holes in the beam one after the other, without missing a single mark, on a desktop drilling machine. The main thing in this operation is to maintain the verticality and parallelism of all holes in relation to each other.

To give aesthetics and safety of using the future fixture, we round off all the front edges with a milling head of the appropriate profile, which is driven by an electric motor.

Then, using a protractor-ruler, having previously set the required angle of inclination, we draw with a pencil two parallel tangents to each hole along the entire length of the beam.

Next, on an electric jigsaw, we make successive cuts to all the holes along the previously marked lines and remove the resulting bars. Nests for open-end wrenches are ready!

It remains to drill small through holes from both ends for attaching the device to the wall of the garage or workshop. To do this, we insert cambric or ready-made plastic inserts of the desired section into pre-made holes in the wall.

It remains only to align the holes on the fixture and in the wall, and tightly screw in the large-head screws with a hand screwdriver. Open-end wrench storage device is ready!

It remains only to carefully insert the keys into the formed grooves in a certain sequence: large ones at the bottom, small ones at the top. As you can see, the device looks not only functional, but also quite aesthetically pleasing.

Improvements and alternatives

In principle, this key holder can simply be cut out with a small, well-sharpened, hand saw, knocking out the sawn plates with a carpenter's chisel or a flat screwdriver with a strong handle. With some care in the work, the required functionality of the product and sufficient aesthetics will be ensured.
Instead of a wooden bar, you can use two metal plates connected to each other from the back by welding with 2-3 jumpers. Cuts can be made with a grinder.
It is easier and more convenient to use a rectangular, square and even round pipe or U-shaped finished profile of the appropriate size to make a key holder. It is possible that the reader of these lines will offer his own version of the turnkey device.