How to install a built-in toilet. How to install or install a wall hung toilet

If you have chosen a wall-mounted toilet for your bathroom, then you should remember that the process of installing it is very different from traditional options. It is much more difficult, and it takes much more time to complete the work. But it should be noted that even inexperienced craftsmen can do the work, provided that they know all the main features of the workflow and perform all the technological steps in the correct sequence.

Main elements of the system

First, let's figure out what the structure consists of, and what parts you will have to install in the process:

Basic structure	It is a solid metal frame, which experts call an installation for the simple reason that it is on this frame that the toilet is placed. When choosing, focus on strength, as this node will bear the brunt of the load. It is also important to have a system that allows you to adjust the height of the bowl, since the floor level in the room can be different.
Tank	It is made of plastic and has a shape that allows it to be placed inside the installation. On the front there is a button that is connected to the drain mechanism, through which access is made to the inside of the system for maintenance and repair, so it is better if its size is large. Well, if the design is two-button, this saves water
toilet bowl	It can have a variety of configurations and colors, you choose the option that will fit the interior. It is also important that the design provides ease of use, so it is better not to buy outlandish forms. The material of manufacture is most often faience or porcelain, the second option is more expensive, but its performance is much higher
fasteners	It should be included in the kit, you need to check the availability of all the necessary nodes, their number is specified in the accompanying documentation. If fasteners raise doubts about their strength, then it is better to purchase more reliable options with the same configuration.

Important!
In addition to all of the above, you will need a tap to connect to the sewer pipe, as well as a water supply to.
These are the main elements, although, depending on the specifics of the object, something else may be used.

Description of works

Now let's figure out how to properly install a hanging toilet, the whole process can be divided into two parts - installation of the supporting frame and work on finishing and fixing the outer part of the structure.

Installation installation

If everything required is at hand, you can begin to perform work, they are carried out in the following sequence:

• First of all, the location of the structure is determined, it is important that all communications can be brought there without problems, and the design does not interfere with movement. The system can be hidden behind a flat wall surface when the walls are made of drywall, or can be in the form of a ledge if you do not want to reduce space in a small room. Marks are made on the surface that will serve as a guide for further work;

• Next, you need to bring water and sewer pipes to the approximate location of the toilet bowl. If they will pass in the wall and screed, then take care of this issue in advance so that later you do not have to make strobes with a puncher. The outlet of the sewer requires special attention, it should be located as accurately as possible, so when installing the liner, put the frame against the surface to make sure everything is clear;

• Then the frame is exposed and an inspection is made to determine whether it fits snugly to the surface, and whether there are any obstacles that need to be removed (mortar buildup, screed unevenness, etc.). After that, holes are marked, which will need to be drilled to fasten the structure to the wall, accuracy and accuracy are important here;

• Drilling is done with a perforator, holes are made in the floor and wall according to the previously applied markings. The diameter of the drill must match the size of the dowels or anchor bolts used. When working, try to always hold the tool so that the drill is located strictly perpendicular to the surface of the wall or floor, otherwise the fasteners will be crooked;

• After drilling, you need to attach the frame and make sure everything is fine. Next, fasteners are taken, and the structure is carefully fixed to the surface of the wall and floor, it is important to check the position of all planes using the building level before final fixing, so that later you do not have to redo the work;

• Do not forget to fix the tank and other components on it before fixing the installation., since it is much more difficult to do this later. At the end of the work, make sure that all connections are secure and there are no backlashes in them;
• Next, you need to correctly set the corrugation, which will connect the toilet to the sewer, for this all the necessary measurements are made and the element is placed at the desired height. It is not worth fixing it right away, since you need to make sure that everything is correct. You put a toilet bowl on the studs, and if all the elements fit exactly to each other, then the bowl can be removed and the eyeliner fixed in the desired position;

• Naturally, before installing a hanging toilet, you need to bring water to the tank. If for floor options the best solution is a flexible connection, then for wall systems, experts recommend using a hard option. It is much stronger and more durable, which is very important, because the system will be hidden behind the finish, and problems may lead to the need to dismantle part of the wall.

Finishing and fixing the bowl

Installing a wall-hung toilet is a time-consuming process, mainly due to the fact that you need to finish the structure and close it.

Let's describe the workflow step by step:

• First of all, you need to build a frame from a drywall profile around the structure, this process is simple, it is important to use reliable elements, take accurate measurements and securely fasten them both to the wall and to each other. If the space is not wide, then the entire surface is sewn up, the photo below shows just such an option for carrying out work;

• After the frame is installed, you can proceed to its lining, for this, moisture-resistant drywall 12 mm thick is taken, this is a durable material that serves perfectly in rooms with high humidity. Measurements are taken, and the sheet is cut into pieces of the desired configuration, pay special attention to cutting a hole for the button, it is better to do this in a single sheet than to combine several pieces around, the fewer seams, the better;
• Fastening is carried out using special self-tapping screws with a small pitch, they are located at a distance of 20 cm from each other, this ensures high reliability of the structure. Do not press the fasteners into the surface too much - you will simply push through the drywall;

• Further work depends on which finish option you have chosen. If the option is to be painted, then the base is puttied until a perfectly flat plane is obtained, if decorative plaster is applied, then again it is necessary to putty the surface, and then apply one or another composition. If you decide to tile, then there is no need for leveling, you can simply close the seams and prime the structure;

Important!
To make the tile hold better, some experts recommend drilling holes in the drywall, which will allow glue to get in, and the ceramic will stick much better.

• When the decoration is completed, you need to install the button, or rather its decorative top, in place and attach the bowl. This is done very simply: it is carefully hung on the studs, after which you need to combine and fix the sewer outlet and the water supply for flushing - everything is quite simple, accuracy and accuracy are important here. After making sure that all joints are reliable, you can fix the toilet;

• The last step is to turn on the water and test flush, it is important to check if there are any leaks and if the system as a whole is working properly. If everything is as it should be, then the work can be considered successfully completed.

Conclusion

It is not enough to choose a high-quality wall-hung toilet - how to install it will take much longer to figure out, but you will get an excellent result. The video in this article will help you understand the issue even better, but if you still have questions on the topic, then ask them in the comments.

Of course, no modern apartment can do without a toilet bowl. Standard models are gradually becoming obsolete, they are being replaced by more modern, convenient and functional built-in ones. You can install such a design absolutely on any wall of the room, which allows you to maximize the use of the entire space of the bathroom for convenience and comfort. does not require the mandatory intervention of professionals, you can easily make it yourself. To do this, you need to familiarize yourself with certain subtleties and rules.

Advantages of built-in toilets

Built-in toilets are the most common among the modern population. And this is not surprising, this design allows you to translate into reality all the ideas of the owners. In addition, built-in toilets have several advantages:

The only drawback of such toilets is the high price, but it's worth it.

In general, there are built-in toilets, both floor-standing and hanging. Which ones to choose - proceed from your personal preferences, but keep in mind that hanging options greatly simplify cleaning in the room. Because in the case of toilets that are located on the floor, there is always a hard-to-reach area at the back, where it is quite problematic to clean up.

You can install such structures on absolutely any wall, no matter if it is load-bearing or made of drywall. The main rule during installation is to choose the right installation system.

There are several systems for installation, some of them require installation in the corner of the room, some systems are made in the form of rails, which also allows other plumbing, such as a washbasin or bidet.

What is a wall mounted toilet

As you have already seen, wall-mounted toilets are quite convenient to use and easy to install. This design is a steel frame, which is quite durable. The main part is attached to it - the toilet bowl. This frame must be properly secured so that it can support significant weight.

A special device is built into this frame, which allows you to adjust the height of the toilet. The bowl itself is directly attached to special pins located in the frame structure. Thus, the hanging faience is fastened.

The next integral element of the whole structure is the drain tank, which is most often made of plastic. Its main advantage is that it is hidden in the wall, while it is absolutely invisible, and there is practically no noise during operation.

In front of the tank, on one of its walls, there is a hole where the drain button will be installed. It is also used in cases where it is necessary to repair or replace any spare parts in the structure. The most basic element in the entire built-in toilet is its bowl. On sale you can find a wide variety of shapes and shades, which allows you to emphasize the originality and sophistication of the taste of the owners.

Existing types of installation

Before you install a built-in toilet, you need to figure out what types of installation exist:

1. Frame installation, which is represented by a metal frame, its kit includes the necessary fasteners and supports.
2. Block installation, which is a plastic tank that is sold with a set of fittings, a variety of studs to be able to fix the toilet, and plates for anchor bolts.

Installation with a steel frame, although expensive, is the most reliable and fastest. The first step is to assemble all the constituent parts of the frame and fix it. It can be mounted in several ways: on the wall at four points, on the wall at two points and on the floor at two points, or completely stand on the floor. The sizes of the metal frame are quite diverse, choose it based on the size of your room.

The main advantage of this installation is that no attachment to the wall is needed, the toilet can be installed independently anywhere in the bathroom. The only drawback is the rather high price, so not everyone can afford such designs.

Frame installations are sold complete with a built-in plastic drain tank. If necessary, this design provides free access to the fittings, which is located behind the flush button. With a block installation, it is possible to install a toilet bowl only on a main wall, which is a huge drawback, however, such kits are much cheaper than the previous ones at a price.

Perform the installation installation very carefully and accurately, the quality of all subsequent work and the durability of the entire structure depend on this stage.

How to install a built-in toilet without using installation systems

If for some reason you do not want to install, then it is quite possible to do without it. To do this, make an appropriate concrete base. The drain tank in this case can be installed in several ways:

• Mount in the wall, and at the same time bring out the drain button;
• Place on top of the toilet bowl.

Instructions for installing a built-in toilet without using installation systems:

Connecting the built-in toilet to cold water should be done using a metal pipe, not flexible hoses. This method will make the design more reliable and durable. And to the sewerage system, on the contrary, you need to connect using a corrugated pipe, the diameter of which will be at least one hundred millimeters. Remember to turn off the cistern valve when you connect the toilet to the cold water supply.

Having understood the toilet installation technology, you can save on plumbing services and do the job as efficiently as possible. The toilet bowl can be mounted in the traditional way or in a more modern way - with installation. In the second case, the drain tank will be hidden in the wall, which will favorably affect the interior of the room.

You are provided with instructions on how to complete each of the listed installation options.

	H	h	h1	L	l	l1	B	b
With one-piece molded shelf, mm	370 and 400	320 and 350	150	Not less than 605	330	435	340 and 360	260
Without one-piece molded shelf, mm	370 and 400	320 and 350	150	460	330	435	340 and 360	260
Baby	335	285	130	405	280	380	290	210

Work set

1. Perforator.
2. Roulette.
3. Wrench.
4. Fan pipe.
5. Flexible hose.
6. FUM tape.
7. Fasteners.
8. Sealant.

In the case of installing a toilet bowl on the installation, the listed list will expand with the corresponding set. Everything you need is bought at any plumbing store.

Dismantling the old toilet

First step . Shut off the water supply and drain all the liquid.

Second step. We unscrew the hose through which the tank is connected to the water supply.

Third step. We unscrew the fasteners of the tank. If they are rusty, we arm ourselves with a screwdriver or open-end wrench. We press the bolt head with the selected tool and unscrew the nut with an adjustable wrench. If it doesn’t work, pre-soak the nut with kerosene. We remove the tank.

Fourth step. Dismantling the toilet bowl.

Fifth step. Disconnect the toilet drain from the sewer.

In old buildings, plums are usually fixed with cement plaster. To destroy it, use a hammer and a chisel. We need to prick the cement and gently shake the toilet to the sides. The drain should turn and loosen. We tilt the product, allowing the remaining water to drain into the sewer.

If the toilet had an outlet to the floor, you need to clean off the wax ring

Sixth step. We close the sewer hole with a wooden or other suitable plug.

Important! Sewer gases do not have the most pleasant smell. However, they are poisonous and highly flammable. Be sure to keep this in mind as you work.

Getting ready to install

The base for the installation of the toilet must be level. There are several options for the development of events, namely:

• if the floor is tiled and does not have level differences, we do not carry out any preliminary measures to level the base;
• if the floor is tiled and not even, install the toilet with chopsticks. To do this, holes are drilled in the floor, chopsticks are hammered into them according to the level, and after that the toilet bowl is attached to the chopsticks with screws;
• if a tile replacement is planned, we dismantle the old cladding and fill in a new screed, if the old one has level differences;
• if the toilet is installed in a new house or apartment without any finishing, we fill in the screed and lay the tiles.

We pay attention to pipes. Sewerage from debris and various deposits, we install a tap on the water supply (if it was absent before) to shut off the water supply to the tank.

How to install a conventional toilet

As a rule, when selling, the toilet bowl and the tank are disconnected. The internal fittings of the barrel are most often already assembled, which greatly simplifies the installation process.

First step. We put the toilet bowl in its place and make marks at the attachment points.

Marks on the floor for fasteners

Second step. We remove the toilet bowl and drill mounting holes in the marked places.

Third step. We drive the dowels into the mounting holes.

Fourth step. Installing the bowl. We insert fasteners through special sealing gaskets. Tighten fasteners. You should not pull too hard - you can damage either the fasteners or even the toilet itself. We pull until the sanitary ware is firmly attached to the surface. From above we close the fasteners with plugs.

Fifth step. We mount the cover and seat. The manual for their assembly usually comes with the toilet, so we will not dwell on this event separately.

Sixth step. We connect the toilet to the sewer. The procedure depends on how the toilet outlet is connected.

Video - Installing a Compact toilet with wall outlet

Prices for accessories for toilets and urinals

Accessories for toilet bowls and urinals

If the release is done into the wall, we work like this:

If the release to the floor is being arranged, we do the following:

Useful advice! If the toilet bowl is connected to the drain pipe using a corrugation, sealing can be abandoned in most cases, because. the design of such an adapter hose is itself able to provide a sufficiently tight fit.

Seventh step. We carry out the installation of the tank. Drain mechanisms, as a rule, are sold already assembled. If the mechanism is disassembled, assemble it according to the manufacturer's instructions (the assembly order for different models may vary slightly).

We take the gasket from the kit and install it in the water hole in our toilet. Install the tank on the gasket and tighten the bolts.

Fasteners are most conveniently installed like this:

Eighth step. We connect the tank to the water supply using a flexible hose. We turn on the water supply and check the quality of the system. If it digs somewhere, tighten the nuts a little. The level of filling the tank with water is adjustable by moving the float lower or higher.

We let the tank fill several times and drain the water. If everything is fine, we take the toilet into permanent operation.

Modern installation. A special wall installation is used, in which the mechanism of the tank is hidden. As a result, only the toilet bowl and the drain button remain visible.

We mount a wall-mounted toilet for installation

Video - How to install a wall-mounted toilet on a Geberit Doufix installation

The first stage is the installation of the frame

We carry out the installation of a metal frame with fasteners. We attach the tank to the frame. The position of the frame is adjustable with brackets at the top and screws at the bottom. Frames are sold separately, have the same structure and are suitable for use in combination with any toilet.

The assembled structure will have a height of about 1.3-1.4 m. The width should exceed the width of the tank.

The second stage - we hang the tank

We perform the installation in compliance with the following recommendations:

• we place the drain button at about a meter distance from the floor;
• between the attachment points we maintain a step equal to the distance between the eyes of our toilet bowl;
• the drain pipe should be located at a height of about 220-230 mm;
• we hang the wall-mounted toilet at a distance of 400-430 mm from the floor. These are average values. In general, focus on the growth of future users;
• between the drain tank and the wall we maintain no more than 15 mm distance.

The third stage - we mount the finished installation

We first check the evenness of the wall with a plumb line. When deviations are found, do the following:

The fourth stage - install the tank

First we connect the tank. The drain may have top and side outlets. Almost all modern models of tanks allow you to choose between these two options.

Important! When installing the toilet on the installation, it is better to refrain from connecting the tank with a flexible hose. will last much longer than a hose. Would you like to destroy the frame skin in the near future for the sake of a five-minute replacement of such a hose? That's it!

For connection, it is best to use plastic pipes. All necessary fasteners usually come with the tank. Separately, you have to buy only a panel for the drain buttons, and even then not always.

We connect the release of our toilet bowl with the sewer. The most convenient way to do this is with a corrugation. We check the tightness of the structure. If everything is fine, turn off the water, temporarily turn off the toilet from the drain and remove the bowl to the side.

Important! The procedure for connecting the cistern to the toilet and plumbing may vary depending on the model of the product. We clarify these points in a separate order and follow the manufacturer's instructions.

Fifth stage - we sheathe the installation

To do this, we use moisture-resistant drywall with a thickness of 10 mm. It is recommended to fix it with a double layer. First we do the following:

• we screw the pins for hanging the toilet into the frame (they are included in the kit);
• close the drain holes with plugs (also from the kit) so that they are not clogged with dust and debris;
• we make holes in drywall for pins, pipes and a drain button.

We fasten the sheathing sheets to the frame with the help of special self-tapping screws. Keep the fastening step at the level of 30-40 cm. The design will have small dimensions and weight, so there are no strict recommendations regarding the distance between the fasteners.

We tile drywall with tiles or finish it in another way at our discretion.

Useful advice! Before starting to tile the box with tiles, we install a plug and a cuff in the place of the future location of the drain button. They are usually included in the kit.

Video - Installing a hanging toilet

Stage six - install the toilet

To do this, we connect the outlet of the bowl to the sewer hole and hang the product on the pins (we installed them in the previous stages of work). You can follow these steps in reverse order, whichever is more convenient for you. Tighten the fixing nuts.

Important! Previously, the tile that will come into contact with must be covered with a layer of silicone sealant (you can install a gasket instead).

You can turn on the water supply and use the toilet for its intended purpose.

The assembly instructions for the installation remain the same. Only the order of installation of the toilet bowl changes. Work in the following order.

First step. Lock your knee firmly. Metal fasteners will help you with this.

Second step. Treat the toilet outlet with technical ointment.

Third step. Install the toilet in the place intended for it. Circle the outline of the sanitary ware and mark the holes for the fasteners.

Fourth step. Remove the toilet and install the mounting brackets from the kit according to the marking.

Fifth step. Install the bowl, press its outlet into the vent pipe and secure the sanitary ware with the bolts or other fasteners included in the kit.

Sixth step. Connect the tank to the drain. Installation and connection of this element is carried out in the same way as in the case of mounting a wall-mounted toilet model.

Seventh step. We bring the drain button into a pre-prepared hole in the casing, turn on the water supply and check the operation of the toilet bowl. If everything is fine, we accept the product for permanent operation.

Read our new article - and also find out what varieties there are, how to choose and install.

Video - Installing an attached toilet with a hidden cistern

Successful work!

Video - Do-it-yourself toilet installation

When equipping a bathroom in a house or apartment, the owners often face the problem of how to “hide” unaesthetic communication nodes. In addition, they are occupied with the question of how to rationally dispose of useful space. There is an excellent option - installing a toilet installation that solves both problems.

The design for attaching a hanging toilet makes it possible to hide all communications and functional parts, including a flush tank. Using the installation visually increases the volume of the room. We will tell you how it is installed, how decorative masking is performed, how the plumbing bowl is then hung.

We have described in detail the process of installing support frames for wall-hung toilets and fixing them to walls and floors. We outlined step-by-step guides for mounting different types of installation. The information presented for consideration was supplemented with visual diagrams, photo collections, video instructions.

The modern market of construction and related equipment offers two types of installation systems. Both options are convenient and practical, and the choice depends on which walls the structure will be attached to and which parts of it will have the main operational load.

Block installation- the simplest, budget option, however, certain conditions are needed for its installation. You can use the structure only on the main wall, having previously prepared a niche in it for placing a tank and places for connecting to a sewer with water supply.

The second option involves lining the system with bricks, masking with plasterboard or other sheet materials, followed by decorative cladding. These actions are performed only at the end of all installation activities.

Strong anchors are required for fastening. They bear the main operational load. The main advantages of the model include a reasonable price and the ability to use the installation not only complete with hanging, but also with stationary floor toilets.

A block installation can be “drowned” in a niche made in the main wall, and in this way save the usable space of the bathroom

Frame installation belongs to a more complex type of construction, but makes it possible to fix the toilet on thin hollow partitions or plasterboard walls. It is considered a very reliable system and has all the characteristics in order to hold both the plumbing module and itself.

Placed on the floor or foundation. Allows several mounting options: with special elements to four points on the wall, to two points on the floor and two on the wall, or only to the base of the floor using stable paws. The main load goes to the bottom of the base.

The main advantage of the frame installation are the adjustable legs. They are exposed to any desired and convenient height for themselves. The design is suitable for installation in rooms of non-standard shape, easily fits into the most unexpected design and can be located even in the corner without hiding the usable space of the bathroom.

The frame installation allows you to place the toilet in any place that is most convenient for you and does not require the presence of a main wall for installation.

Dimensions of block systems are always standard. Their width is 50 centimeters, the depth varies from 10 to 15 cm, and the height does not exceed 1 meter. Frame installations have a base base width of 50 to 60 cm, a depth of 15 to 30 cm, and a height (due to adjustable legs) of 80 cm to 1.4 meters.

For wooden houses or non-capital buildings, experts recommend buying the widest and lowest systems possible. This makes it possible to reduce the load on the walls and ensures the normal functioning of the module for a long time.

Image gallery

The standard cost of carrying out work on a is half the amount spent on the purchase of a plumbing fixture. Given such prices, it is quite understandable that you want to save money and do the installation yourself. Use the training videos and follow the instructions when.

Types of installation systems

Consider the design of the installation to understand how it is mounted. In fact, this is a steel frame, which is attached to the ceiling and the wall, or only to the wall. After installation, communications and plumbing are brought to the module. Then the frame is sheathed with dry plaster and lined. Consider the differences between the systems.

Advice. Suspended plumbing only visually reduces the space, installation requires the same amount of space as for a conventional model.

Installing the installation

Models of installation modules may differ, so before starting installation, carefully study the instructions for your model. Start creating markup:

1. Draw the center line of the center of the installation.
2. Mark the distance from the frame to the wall, it must be at least 13 cm.
3. Mark the location of the drain tank.
4. On the floor, mark the places where the anchors will be. It is better to do this with a fitting frame.

Marking for mounting the frame

Use a perforator to make holes for the fasteners and put the installation in place. Attach the frame to the anchors and adjust in height. Secure the system using a level. The frame must be rigid and level.

Advice. Purchase the toilet together with the installation module to avoid surprises during installation with mismatched connection connectors.

Connecting communications

First of all, we bring water to the tank. Modern tanks have two types of connection to choose from: top or side. The pipe must be plastic, because. flexible hoses have a limited service life. To replace such a hose in the future, you will have to dismantle the false panel with the lining. Agree, this is too expensive to replace one tube.

Tank installation

Having installed the tank, proceed to the installation of sewer pipes. The toilet outlet is connected to the sewer outlet by means of a corrugation. It is very rare when it is possible to make a connection directly. Mount the tank button.

It is necessary to check the tightness of the system. The toilet bowl is hung on the frame, a test flush is made. Then the toilet is dismantled, and finally installed after the completion of the finishing work. The toilet bowl is placed on the floor with a bowl down, the fasteners are baited and fixed on the frame. Under the bowl is to put a soft stand for safety net.

Sewer connection

Advice. The studs for fixing the toilet bowl must be screwed in before finishing work begins.

Facing the installation module

The installation frame is sewn up with moisture-resistant drywall sheets, which are mounted directly to the frame or to the profile box. The instructions usually contain a detailed cutting map, taking into account slots for holes for the drain button. Plasterboard sheathe the entire wall or just a niche. A shelf for accessories is often made in a niche. The partition is faced with any finishing material or plaster.

Facing the installation module

After the lining has dried, install the toilet bowl completely.

Advice. The drain button of the tank looks good if it is located in the center of the facing tile or in the center of the tile joint. Therefore, it is advised to lay the tiles from the button.

Concrete base instead of installation

It is possible to replace an expensive installation system with a homemade concrete alternative. The drain tank in this design can be installed in two ways:

• as standard over the bowl on the manufactured base;
• mount the tank behind a false wall, bringing the mechanical drain button to the wall.

This variation is quite economical, but the installation of the base will take more time compared to the installation of a store installation, since you have to wait for the concrete to gain strength. You will need the following materials for the work:

• about 40 liters of ready-made concrete: cement not lower than M200, sifted sand, fine gravel and water. The ratio of components in the proportion of 1:2:3:0.8.
• boards or plywood for formwork;

concrete base

• wood screws for collecting formwork;
• threaded rods for fixing a toilet bowl 20 mm thick, about 80 cm long;
• silicone sealant;
• plastic pipe according to the size of the drain;
• drain fitting;
• level.

Start by drilling holes for metal rods in the wall. The depth of the hole is 15 cm. The hole is cleaned and glue (chemical anchor) is poured inside. Insert the rod. The formwork is mounted on self-tapping screws, a hole is pre-drilled in the front board for the release of rods. For the stability of the formwork, nuts are screwed onto the pins. The building level checks the vertical. Install the clutch. Before concrete work, they try on the final version: the outlet of the toilet bowl is combined with the coupling, and the rods must go into the holes for fastening. The drain hole of the coupling is covered with foam and pressed. Pour the concrete mixture into the formwork. Again check the level. After three weeks, the formwork can be removed and the installation of plumbing can begin. Gaskets are installed on the toilet and put on the pins. Check stability and performance.

Advice. The appearance of the installation does not inspire confidence in some, however, such a frame can withstand a power load of 400 kg.

Health check

Before sewing up the entire structure with a false panel, you need to make sure that there are no leaks and that the system as a whole is working. To check, open the water supply tap. After the tank is full, the water is drained. You need to do this several times.

The toilet with installation looks neat and fits most interior styles.

If there are problems, then the possible causes may be as follows:

• when water leaks from the tank - most likely the gaskets are installed incorrectly or moved during installation. Shut off the water, unscrew the connecting bolts, inspect and correct the gasket;
• if the toilet staggers, then somewhere it is worth tightening the bolts in the installation or the fasteners of the toilet itself. Tighten the bolts carefully so as not to split the ceramics and not to break the threads of the fastening fittings;
• standing water in the toilet indicates that the drain pipe is installed at the wrong angle. Dismantle the device and set the drain strictly at 45 degrees;
• leakage at the floor can be caused by insufficient sealing of the corrugations.

Installation of a wall-mounted toilet is technologically more complicated than installing a classic counterpart. However, if you own a construction tool, then if you wish, installing the installation with your own hands will not cause difficulties.

Installation guide: video

How to install a toilet installation: photo