Furniture for dolls. How to make furniture for dolls with your own hands? Making a plywood bed with your own hands, only fantasy can stop you

Giving or making a home for your daughter for her dolls is just the beginning. Next, this house will have to be furnished. This is a bunch of toy furniture, appliances, accessories. How to make furniture for dolls with your own hands will be described in this article.

How to determine the size

Dolls, their houses and furnishings are miniature copies of us and our dwellings. And the most reliable way to make doll furniture with your own hands and not make a mistake is to measure real objects, reduce them several times, and then work with the values obtained.

Furniture for dolls - copies of our furniture

How much to reduce the actual size depends on how small or large the doll is, because they are from 7 cm to 60 cm or even higher. Accordingly, they need furniture of different sizes. To determine the number by which real dimensions should be divided, we divide the average height of a person in centimeters (170 cm) by the height of the doll. Let's get some number. Here it will be necessary to divide the dimensions of real furniture into it.

For example, the height of the doll is 15 cm. We calculate: 170 cm / 15 cm = 11.3. Here we divide all the parameters of “human” furniture by this number. It should also be said that exactly 14-15 cm is the most popular size among the puppet population. Therefore, most of the finished furniture is made in a ratio of 1:12. We can also use the available dimensions, at least in order to be able to navigate with the scale of the required parts and the amount of materials.

So, the most common sizes of dolls:

male doll 150 mm;
female doll - 140 mm;
baby doll - 75-100 mm;
toy baby - 65-75 mm.

If you need furniture for dolls of similar sizes, its parameters will be as follows:

If the toys you have are slightly larger / smaller, you can not adjust the sizes. With a large difference, you will have to increase or decrease (or you can calculate it yourself).

Doll furniture from matchboxes

The easiest way is to make furniture for dolls with your own hands from ordinary matchboxes. They are glued together with PVA glue, creating certain designs, then pasted over with paper or cloth, self-adhesive film, etc. Wooden beads can be used as legs, drawer handles can be made from small buttons on legs or from long beads.

From matchboxes you can make chairs, a table, a chest of drawers, a bed, a bedside table. Another thing is that furniture is obtained for very small dolls, no more than 10 cm high. Although, you can use a larger number of boxes by gluing them into blocks, and from these blocks create furniture for dolls about 15 cm high. Also an option, but work with others materials are not much more difficult, but they are more plastic and allow you to create products of more elegant forms.

This may be your first experience in making doll furniture. Later it will be possible to take on something more serious.

Cardboard Dollhouse Furniture

You can try your hand at making furniture for dolls using cardboard. The material is inexpensive, affordable, it will be possible to try and make mistakes, redo it. Cardboard is usually connected with PVA glue, you can use a glue gun or any universal glue that can glue cardboard, fabric, wood. Just making furniture for dolls with your own hands from cardboard, you will still use these materials. If we talk about convenience, then a glue gun is preferable - it glues quickly, it is convenient to work, the connection is reliable.

To make furniture for dolls, you can use ordinary packing cardboard. It is cheap, but the furniture from it is very delicate. It is unlikely that the child will have enough of it for a long time. But, as a "first experience", this is a good option. Scrapbooking cardboard products are more reliable. It is more dense, homogeneous, has a different thickness (from 2 mm and more), can be with a textured surface, extruded monochromatic patterns, a pattern on one or both sides. The disadvantage of such cardboard is that you have to buy it, and some types of such cardboard are not very cheap.

Cardboard bed for a doll

This cardboard doll bed is designed for a large doll - up to 50 cm in height. If necessary, all these dimensions can be reduced.

This option can be done in just 10-20 minutes. There is no need for glue or other fixatives. The pieces are held in place by grooves cut into the cardboard. The width of the groove is equal to the thickness of the cardboard, the length of the slots and the dimensions of the blanks are indicated in the diagram.

The green and yellow dots indicate overlapping cuts. They are inserted one into the other, where the assembly ends. If you like this model, it can also be made from plywood.

Schemes for the manufacture of cardboard doll furniture

Basically, furniture for cardboard dolls is glued. It is unlikely that it will be possible to make something openwork or very complex out of this material, but the manufacture of simple models will not take much time. Having a diagram with dimensions, you can even do without explanation. Everything is so clear.

Such models can be made "by eye". Without “upholstery” they look unsightly, but after that they look pretty decent. A bedside table with doors and an open shelf - the scheme is the same, different execution

Furniture schemes for dolls can be used not only for making cardboard. They can be transferred to plywood and cut with a jigsaw.

Wardrobe for dolls from improvised materials

The toy cabinet can be made of plywood, painted or pasted over with wrapping paper or self-adhesive film. Here, probably, there will be no questions - everything is clear, and if there are questions, you can peep their solution in a “natural” closet. But you can make it from very inexpensive materials. Do-it-yourself furniture for dolls is good because its cost is very low.

From a cardboard box

The main task is to find a cardboard box of the right size. Moreover, it will be easier to work if it is packaging - with folding edges. Such a folding part is a ready-made door. All that remains is to finish it - hang a mirror, attach a handle, etc.

One of the options for home-made furniture for dolls is a wardrobe

What do you need to work

For work, you will need a good adhesive tape, it is better - on a paper basis, since it is then easier to glue the finish to it. If you have a glue gun or a construction stapler (a large clerical one will do) with staples, that’s also good. If you use other materials besides cardboard and paper, it is better to find a universal glue that glues paper, cardboard, fabric, plastic. You will also need scissors and a clerical knife, a ruler.

If the found box is too large, it can be reduced by cutting off the excess. To make the folds even, we take a ruler. we apply it to the place of the future fold, several times we pass well along the ruler with a blunt solid object (the petiole of a spoon or fork). After that, it will be easy to bend the cardboard.

Filling for a toy cabinet

From scraps or from another box, cut out the shelves. They should be slightly - 5-8 mm - longer and wider than the internal space of the cabinet. We bend the excess so that the sides form on all sides. Folds form in the corners, we carefully cut them off. We bend one of the parts by 180 ° and glue it to the shelf itself. This side of the shelf will "look at the world." We bend the other three parts at an angle of 90 °, coat with glue and glue the shelves into the cabinet. The photo on the right shows how the shelves are glued. But, so that the gluing places are not conspicuous, it is better to wrap the sides down.

Making furniture for dolls with your own hands is no less fun than playing with it later.

In addition to shelves, you can also make a crossbar for hangers. It can be made from bamboo skewers, for example, you can try using a juice straw, wire, etc. Hangers can also be twisted from colored wire or cut from juice bags, plastic bottles, etc.

Finishing is a creative process

Next up is finishing. You can paint the cardboard with watercolors or acrylic (better) paints, glue it with wrapping paper, cloth, felt. You can imitate a mirror surface - paste over with foil (food, for example). If you want to make a "plastic" surface, look for water bottles of the right color, cut off the neck and bottom, and use the "body" as a finishing material.

Finishing is a creative process, but to start with, use simpler, softer, thinner materials that are easier to work with.

Handles can be made of wire, beads, long beads. For larger toy cabinets, buttons or buttons can be found. We glue all this “beauty” after we have “sheathed” the cabinet.

Newspaper doll wardrobe

You will need old newspapers, PVA glue with a brush, a glue gun, a couple of pieces of wire or thread, wrapping paper for finishing the cabinet or paint.

We twist dense tubes from newspapers, coat them along the edge of the PVA and leave to dry. Then the tubes can be glued together. A glue gun is best for this operation. There are two ways: first, assemble large blocks, then cut them into fragments of the desired length, or immediately cut the tubes of the desired length and immediately glue the blanks in size. The second way is more painstaking, but there is less waste.

The finished walls of the cabinet must be fastened together. To rigidly fix the angle of 90 °, it is better to use a thin wire. First, coat the joints with glue, then draw the walls one to the other with wire. If the wires are in the way, they can be removed after the glue has dried.

The bottom, top, shelves are glued using the same technology. The doors will need to be done a little differently. In order for them to open, two strips about 1.5 cm wide are cut out of the tape. Tape is glued along the edge of the door so that a little more than half hangs in the air. With this loose adhesive tape we glue the door to the wall, but so that there is a gap of 2-3 mm between the wall and the door (there is just adhesive tape). This will allow the doors to close. We fix the glued door on the other side with a second strip of adhesive tape.

The second way to fix the doors is on the wire. Only this time it should be tough and thick enough. Cut off a piece that is 2 cm longer than the height of the cabinet. Immediately on the wire on one side we make a loop, using 1 cm. We bend the loop at an angle of 90 ° to the wire. We make holes in the bottom and roof, pass the wire through the bottom, the loop remains below. We put a door on the wire, using the outer tube instead of hinges. Slightly bending the wire, we thread it into the hole in the cabinet roof, bend the excess, fixing the door. We repeat the same operation with another door. Please note that it is necessary to fasten the door to the adhesive tape before finishing the cabinet, and it is possible to attach it to the wire after.

There are some other little things that need to be said a few words. Legs and handles for the cabinet can also be made from paper tubes. You just need to twist them from the paper with which you trim the toy. Fold it into a tight roll, glue the edge with glue, then cut it into segments of the desired length and glue it in the right places. Instead of tubes, there can be wooden sticks, beads, etc.

Doll bookcase or ruler shelf

You can make furniture for dolls with your own hands from school wooden rulers. They are good because they are already processed, have the same width and thickness. In the stationery store you can find the right size - larger / smaller, wider / narrower - as desired. For example, to make a doll bookcase, you need 6 rulers 15 cm long.

You will also need a jigsaw to work. If there is an electric one, great, if not, a manual one will do, since there is not too much work. You also need fine-grained sandpaper, glue (PVA or carpentry) and paints (acrylic or gouache).

We cut segments from the rulers: 4 pieces of 6 cm each, one - 8 cm. We sand the edges to an even state, we also remove the markings and barcodes. Between the two rulers we have shelves (which are 6 cm each), on top we leave approximately the same distance - under the lid (a segment of 8 cm). We coat the joints with PVA or carpentry glue, connect and tighten with masking tape, leave for a day. When the glue dries, glue the very last detail - the cover on top. Actually, the shelf itself is ready, it remains to paint it.

To obtain an even and bright color, it is better to cover the structure with white, after drying, already paint with the desired shade. Also, do-it-yourself doll furniture can be decorated with.

Furniture for dolls: photo ideas

You can make furniture for dolls with your own hands from the most unexpected materials. You have already seen how to use newspapers and wooden rulers. But you can make tables, chairs, armchairs, sofas, beds, shelves, cabinets, etc. from ice cream sticks.

Garden bench or sofa - depending on the finish

What is good about this material, you probably already understood - it has rounded processed edges, is the same in size and well processed. If the sticks seem too rough, sand them down to smoothness with fine grit sandpaper.

Clothespins make good armchairs and chairs. They are disassembled into halves and connected with wood glue. Figured products are obtained in almost a few tens of minutes.

Armchair, table - can also be made from clothespins

Almost always, wooden clothespins are used to make doll furniture. But no one forbids taking plastic ones. It is also difficult to work with them in the same way, only the difficulty is that wooden ones are easier to modify by changing the thickness of the shape, etc. If the product is simple, does not require refinement, you can take plastic ones. They are more varied in shape and size, already painted, so there is less fuss with them.

With the growth of skill, you can switch to more complex material - plywood or wood. The difficulty is that turning and cutting miniature parts requires filigree precision, perseverance and takes a lot of time. But you can do whatever you want.

Corner desk for a doll….everything is real

Plywood doll wardrobe - very high fidelity

Children, playing completely copy the habits, preferences of adults, especially girls. Each of them has their own favorite play set, including dolls and doll furniture. In order for the game to be complete, in their opinion, the dolls need their own home, where there will be tables, chairs, a kitchen, armchairs, beds and much more. You can buy these items ready-made, but exclusive handmade doll furniture will be much more dear and beautiful. Especially if you do it with your daughter. Having made her work, the baby will love this furniture and will never part with it.

Materials and tools

It is an erroneous statement that it is long, difficult and troublesome to make furniture for a Barbie doll with your own hands. Having tried hota once, it will be very difficult to refuse this activity. Especially when you see how happy the daughter is with the new product. Buying something specific is not necessary. In every house there is something unnecessary, but suitable for doll furniture.

For instance:
plywood and its trimmings;
matchboxes;
boxes and jars of cosmetics;
shoe packaging boxes;
sponges;
fabric scraps;
plastic bottles;
threads, beads;
ice cream sticks;
toothpicks and clothespins;
foil, ropes, wire.

It is these materials that can serve as the basis for home-made furniture for dolls. In addition to them, in order to make it, you also need to prepare:
stationery scissors;
compass;
felt-tip pens and markers;
rulers;
glue;
watercolor paints;
stapler.

Perhaps everything will not be required at once, or other tools may be needed - it depends on the degree of complexity of crafting furniture for dolls and the imagination of the masters - mothers and daughters.

Step-by-step instruction

Ideas and options on how to make furniture for dolls with your own hands from improvised materials, we will consider a little later, now we will analyze the manufacturing steps:
1. Before starting work, you need to come up with a layout or find a suitable one on the Internet.
2. Transferred to paper or printed.
3. Circle the pattern with a marker and cut out the finished figure with scissors.
4. Further, it’s easier than ever, you need to fasten all the details together.
5. To make the furniture more beautiful and brighter, it can be trimmed with scraps of fabric or simply painted with paints.

Good houses are made from cardboard. It is considered the most affordable and convenient material.

You can, if you know how to make furniture for dolls from matchboxes with your own hands. They make roomy and very comfortable chests of drawers, table drawers and other doll interior items.

Wire. The material contains a video on how to make furniture for dolls from improvised materials, including wire. There are many options and you can choose the most affordable and easy from them.

Now consider the successful options for creating furniture for dolls with your own hands using examples.

Bed

Consider the simplest option for making a doll bed with drawers for things. For work you need to stock up:
empty matchboxes;
a sheet of cardboard;
stationery glue or PVA;
pencil for drawing a diagram;
scissors for cutting out elements;
clean white paper;
beads;
paints;
thin rope or wire;
other materials for decor - and the discretion of everyone.

Instructions on how to make do-it-yourself doll furniture from matchboxes, in our case, a bed with drawers:
1. First, measure the height of the bed. To do this, you can measure the doll with a ruler and, from the measurements taken, calculate the number of empty matchboxes.
2. Then glue all the boxes with the sides - thus creating the base of the bed.
3. Paste the finished structure with white or colored paper, without affecting the boxes.
4. The back is cut out of cardboard. The form depends on the desire of the craftswoman or the preference of the daughter.
5. The sides of the bed are glued to the base.
6. The bed is painted in the desired color.
7. Beads - handles are attached to drawers with wire.

How to make newspaper tubes:
1. The newspaper is cut into pieces of the same width and length.
2. Each layer is smeared with glue.
3. You can use as a basis: a knitting needle, a sewing needle and a ballpoint for a pen. A newspaper strip is wound on it.
4. The base is stretched, the tube is given time to dry.

Sofa assembly process:
1. A base is woven from dry tubes - 15 pieces in the transverse direction and 5 in the longitudinal direction.
2. We form a side in 5 rows.
3. We build up the racks, we make about 6 legs.
4. We cut the blanks.
5. Add skewers to the middle racks for strength.
6. We break, at a distance of 5 cm, first the first blanks, then the second - also at a distance of 5 cm, fix the racks - glue a clothespin to them.
7. Cut off the excess length of the legs.
8. We insert racks in the back area.
9. Weave a few more rows - full, then 2 - incomplete (shortened).
10. We form the height with strips of cardboard.
11. Weave 3 more rows and close them.
12. We fix the crossbar with the diameters.
13. We wrap each leg.
14. We decorate the product at our discretion.

Kitchen

Making a kitchen set for a doll is also not at all difficult. The work will require different materials, depending on the imagination of the master, including a lot of boxes, if there are not enough of them, we finish it ourselves. So, we make furniture for dolls with our own hands, in particular the kitchen.

First, we make a single design from boxes selected by size. We put it in one large box - shoe packaging is quite suitable for this purpose. If you plan to create hanging cabinets, then glue them to the wall of cardboard by cutting the doors into them. We make doll furniture from newspaper tubes according to the master class, which is attached below.

Advice! If it turns out that the cardboard chosen for work is not dense enough, it can be made stronger by gluing several layers together.
Decorate with self-adhesive film or plain colored paper. Glue the lockers individually as well, build handles from beads attached with wire. From it you can also build a tap, and water pipe handles - from multi-colored beads. A bowl from a doll set can serve as a sink. Draw the distance between the cabinets and the sink with an apron, download the image you like from Runet, print it, and then stick it in the right place.

Do-it-yourself kitchen furniture for dolls is as easy to make as everything else:
wall cabinets can be made from plastic boxes from cosmetics or medicines;
you can also make a microwave from them;
a clock in a doll kitchen can be made from an ordinary button by attaching a drawn dial to it;
you can make a refrigerator out of a cardboard packaging for medicines by cutting one side part on three sides - it will serve as a door, stick cardboard shelves inside.
You can make a gas stove from a ready-made cardboard package, make burners from a computer disk by cutting out the desired diameter, and, for example, a bottle cap can serve as handles.
As you can see, there are a lot of ideas for creating miniature furniture, you can come up with even more on your own - the main thing is to turn on your imagination and act.

Table

Do-it-yourself furniture for dolls cannot be without such a necessary item as a table. It is even easier to make it than a kitchen or a bed. There are many options for drawings, photos, diagrams for creating them. You can use ready-made ones, or you can just think and decide how to make a furniture table for dolls out of the box with your own hands from what is at hand.

For example, this miniature table. To create it, you need to prepare:
plastic bottle;
piece of cloth;
cardboard sheet;
scissors and glue.

Instruction with step by step execution:
1. Cut out the table supports from the bottle in the amount of 4 pieces. For greater stability, when cutting, bend the legs.
2. Next, cut out a circle from cardboard, it will serve as a table top. Glue it to the bottom of the bottle.
3. From a piece of cloth prepared in advance, a tablecloth is cut in the form of a circle, with a diameter slightly larger than the countertop.
4. The table is covered with a tablecloth. For ease of use, glue the ends to the supports.
It is also easy and quick to build a plywood dining table. Do-it-yourself furniture scheme for dolls made of cardboard, plywood is attached.

Microwave

Do-it-yourself household furniture for dolls can be made not only from cardboard, but from paper. Here is this microwave, made from a regular stationery pencil sharpener, with a removable lid. Pasted over with white paper, you can use ordinary foil, then it will turn out to be metal. From plasticine we make handles, levers and toggle switches. Such a miniature microwave oven will greatly decorate the kitchen furniture for Barbie dolls, as it looks realistic and functional.

Refrigerator

This household appliance must be a must for a good housewife, albeit a very small one. It is very easy to build cardboard furniture because this material is easy to work with, easily takes the desired shape, and sticks well.

For work you will need:
tea cardboard box;
white acrylic, you can use gouache;
cotton swabs;
thick cardboard.

Progress:
1. With a clerical knife, you need to cut off the top of the tea box in such a way that we have self-opening doors.
2. Cut out shelves of the required width from cardboard.
3. We increase the length by a few millimeters, bend it down, insert it into the refrigerator, attach it to the side with adhesive tape or glue.
4. We fix the door with the same adhesive tape.
5. Paste the refrigerator with white paper.
6. We form handles from cotton swabs and glue them to the door. We paint with acrylic paint.
7. Cut out small pictures (you can use stickers) imitating magnets.
Such a cute refrigerator will become a real decoration of the doll's kitchen.

Chairs

Anyone who has:
fantasy;
perseverance;
wish;
patience;
time.

If there are no ideas, a choice is attached to help: a drawing, do-it-yourself doll furniture made of cardboard, a photo and a diagram for tables, beds, chairs and other items of furniture for dolls.

From three boxes you can make this wonderful chair-stool. For very tiny dolls, matchboxes glued together are suitable.
To give additional strength, they are additionally connected with either masking or ordinary tape. A cardboard circle glued on top, covered with a synthetic winterizer fabric, will add softness and style to the product.

You can make furniture for dolls from plasticine, including chairs - it's very quick and easy, finishing them according to your preference. You can peep ready-made ideas from the Internet, you can come up with an idea yourself. This version of the chairs is made from a conventional tube from a thermometer.

It is done very simply:
1. First, the size of the finished product is measured - the doll is placed next to the tube and the height of the chair and back is measured.
2. For convenience, a chair layout is drawn on a tube, then cut out with scissors.
3. The recess is filled with crumpled pieces of paper or foam rubber.
4. Then the product is pasted over with a colored film or paper, wrapped in a fabric patch.
Everything! The chair is ready - quickly and easily.

Salon

At home, you can create any doll headset from what is at hand. After all, making furniture for dolls, and even more so with a child, is the highest reward for a parent. It becomes the most beloved and the most beautiful, because it is made with love. There are a lot of recommendations and tips on how to make furniture for Barbie dolls, do-it-yourself clothes and other miniature accessories, including a real beauty salon.

The barbershop must have tables, a sofa for relaxation, a sink, a TV, armchairs and a dressing table. It is not difficult to make this furniture for dolls from boxes with your own hands. For the dressing table you will need:
cardboard box;
sheet cardboard;
a piece of foil;
a small piece of ceiling plinth;
glue, marker;
self-adhesive or colored paper.

Step-by-step instructions on how to make cardboard doll furniture - in the form of a dressing table:
1. The height of the future structure is marked on the cardboard box.
2. The excess is cut off.
3. The bottom of the box should serve as the basis of the table, and it is used.
4. Supports (legs) are cut out from the bottom.
5. Glue the parts with glue.
6. Paste over the top with decor - colored paper or film.
7. The shape of the future mirror is drawn on cardboard.
8. A foil is glued onto the protruding part of the cardboard, the size corresponding to the mirror.
9. The edge (finishing frame) is made from thinly sliced pieces of plinth. The table and the mirror are connected.

The chair for the table is made in a similar way. Only its height changes, and instead of a mirror, a back is made.
If the dressing table is supplemented with a chest of drawers or a bedside table for storing things, then the appearance of the hairdresser will change significantly. Arrange hairdressing accessories beautifully on the tabletop of the dressing table.

A locker for clothes in a hairdressing salon is a necessary thing. You can use patterns, do-it-yourself cardboard doll furniture schemes, which are full on the Internet, or you can make it from a simple cardboard box of any size. Putting it on the side, which is smaller, we automatically get opening doors. The surface is decorated with film or paper, the internal filling can be created as you like, as long as you have enough strength and ingenuity.

Chest of drawers for things

This item is needed to store hairdressing equipment: combs, capes, towels. So, a dresser for matchbox dolls should be present in the hairdresser.
What you need for work: 2. Cut out a strip of napkins to fit the desired width and diameter.
3. You can also paste over the back of them.
4. The front part is glued a little differently. Here you need to take out each of the boxes one by one, paste over each one separately with a napkin.
5. We cut out handles from matches, fix them on the boxes.
Miniature matchbox furniture is made very simply and quickly. Anyone can cope with this task - even a child.

Knowing and knowing how to make furniture for Barbie dolls with your own hands, you can create a hairdressing house. This sweat requires a large shoebox. It should be glued inside with colorful paper - this will be the room of the house. Using different colors will add style, add color.

You can, if any, lay a piece of linoleum on the floor, you can not just paste over the walls with paper, but paint them in a natural texture, for example, in a brick wall or create a background in the form of decorative plaster or simple wallpaper.

How to make do-it-yourself furniture for dolls using video or the Internet is more or less clear. Having made all the furniture items necessary for the hairdresser, they are placed in a convenient order in the received house. Holes are cut in the walls in the form of windows, you can decorate them with cornices and curtains. Miniature pictures with hairstyles cut out from magazines will only decorate the design.

If it's interesting, watch a video tutorial on how to make do-it-yourself doll furniture for girls, how to create clothes for Barbie dolls, download crochet furniture knitting patterns and do-it-yourself furniture drawings for dolls.

Do-it-yourself furniture for dolls - what could be better for the joint creativity of parents and a child? On the one hand, this is a great way to save the family budget, because buying miniature sofas and doll lockers in specialized stores are not so cheap. Well, on the other hand, needlework classes help to instill in your girl accuracy, perseverance, and creative skills. So, let's figure out how to create doll furniture with your own hands and make it truly original, because you will not find exactly the same furniture set anywhere else!

Making furniture for dolls with your own hands: what tools will come in handy?

If you want to please your baby with a new thing for the doll's interior house, do not rush to get rid of the following:

matchboxes (of which it is easy to build real drawers for dressing tables and cabinets)
cardboard boxes for shoes, cosmetics and small household appliances;
plastic bottles;
bright sponges for washing dishes and viscose napkins for cleaning;
plywood;
flaps and scraps of fabric and leather;
flexible wire and foil;
plastic food containers, egg molds;
threads for knitting and other little things that will be useful in creating doll furniture.

Advice! In addition, polymer clay, beads, beads, rhinestones and other decor of your choice may come in handy: after all, the brighter and more elegant the interior of the doll’s home is, the better.

Workshops on creating furniture for dolls: detailed instructions for your creativity

Any mother knows that her daughter's best friend is a doll. And this means that you will have to make every effort to create a decent home for your princess's favorite toy. And you can't do without furniture filling. We offer you several master classes that will tell you how to make furniture for Barbie, Monster High dolls, Winx dolls, baby dolls and so on with your own hands, and you just have to choose the appropriate option.

Do-it-yourself furniture for dolls from boxes

We offer you two simple options for making miniature furniture from cardboard boxes. We will make a dressing table and chest of drawers.

For the manufacture of dressing table we will need:

a small cardboard box (hair dye packaging is suitable);
scissors or stationery knife;
Ruler and pencil;
foil;
glue;
white or colored paper for pasting the finished product.

To begin with, determine how high the future table will be so that the doll is comfortable in front of it. If you are making furniture for a standard height doll (Barbie, Monster High, Winx, etc.), this may be 6-8 cm. Cut the box at this height.

Cut off a flat piece of cardboard from the rest of the box (a blank for a mirror), the width of which matches the width of the table and has a height of 15-16 cm. Lubricate it with glue and attach it to the base.

Decorate the upper edge of the future mirror with figured openwork patterns or simply make it rounded.

Paste a table with a mirror with white or colored paper.

Decorate the workpiece with painted doors and drawers (they will not open and slide out). You can also decorate the walls of the table and the place for the mirror with any patterns.

The final touch: you need to cut out the foil " mirror” and handles for drawers and doors, and stick them on the places provided for this.

Advice! Complete the dressing table with cardboard crib made in the same style (for example, you can decorate its headboard with patterns similar to the decor of a table and a mirror). This will help to design the interior of the doll's bedroom in a single way.

Connect the matchboxes together with glue so that their drawers slide out. When the furniture is ready, cover it with decorative paper.

As you can see, making furniture for dolls with your own hands from cardboard is very easy, and at the same time it looks just as beautiful as the purchased one.

Do-it-yourself plywood furniture for dolls

We offer you a simple master class on making a round coffee table for a doll.

For its manufacture you will need:

plywood;
a device for cutting plywood (for example, a jigsaw);
glue;
varnish or acrylic paint.

First you need to cut out two identical round elements (table surface and shelf), as well as legs and racks for the shelf. Next, connect them together with glue, as shown in the diagrams given by us, and cover with varnish or paint.

Do-it-yourself wooden doll furniture

We suggest you make a puppet sofa from wood and fabric. For this we need the following:

flat wooden planks about 1 cm thick;
wood cutting tool;
glue;
wrapping fabric.

Cut out five elements of the future sofa: the base (H6 cm * D16.4 cm), the same back and bottom (H6 cm * D14 cm) and two armrests, smoothly expanding towards the top (H4 cm * D6 cm at the bottom * D7 cm at the top).

Glue them together (except for the bottom).

Cut fabric elements of the same size and stick them on a wooden blank.

Separately, glue the bottom of the sofa with a cloth and lay it on the base.

Do-it-yourself furniture for paper dolls

To make a miniature paper doll table with a paper top mosaics, we will need:

very thick paper or cardboard for the base;
ruler;
awl;
scissors / clerical knife;
colored plain cardboard for mosaic;
toothpicks or wooden skewers;
thick threads;
glue.

First of all, we cut out the base for the countertop from cardboard or thick paper. Its dimensions can be any. Make small holes for the legs on it in the corners with an awl, and on the four sides for the racks that you will need to decorate the table with weaving.

Cut small squares of the same size from colored cardboard to decorate the table. Glue them to the top of the countertop in the form of a mosaic.

Insert toothpicks or skewers into the holes and additionally fix them with a small amount of glue. Braid the legs of the table in a spiral with threads, the edges of which are fixed with glue.

Glue the end of a thick thread to the underside of the countertop near one of the racks. Start braiding the legs and racks, passing the thread alternately under them, then over them. Make sure that the weaves of the threads are tight, but do not tighten the racks too much, as this can lead to deformation of the finished product. Braid the table as much as you want, then decorate the lower and upper edges of the weaving with a decorative pigtail from the same threads.

Having bought a dollhouse in a store or made it on their own, many parents think about how to furnish it. You can, of course, purchase ready-made items, or you can make furniture for dolls with your own hands, one that only your child will have in a single copy. An additional bonus will be saving the family budget, because toy furniture is not so cheap. And how much fun it will bring to your child, because he can help you in this creative process.

Basic materials

Do-it-yourself doll furniture can be made from any improvised means:

Plywood sheets and wood are the most commonly used materials for making toy furniture. Working with them is laborious and requires experience, however, products made from them will last a long time.
Cardboard is easy to work with, so even a child can be involved in the process. In the work, you can use both sheets and boxes.
Matchboxes allow you to design any piece of furniture with drawers.
Plastic jars and cosmetic boxes can sometimes even be used ready-made, for example, as a bath. Having shown imagination, you can make masterpieces from toothpaste caps and other little things.
Plastic and cardboard egg trays can also come in handy and will perfectly equip the space of a children's house. It is necessary to think over the composition in detail and cut out the necessary parts.
The advantage of wire is that it bends easily. This, for example, will allow you to decorate a room in the Provence style, making the bed frame look like a forged product. You can complement the interior with a wrought iron chandelier or candlestick.

Important! It can also be colored sponges for washing dishes, viscose napkins, plastic bottles, foil, various textiles. Most of the things that we determine the place in the trash can will help to make do-it-yourself furniture for dolls from improvised materials.

Dresser and sofa for dolls

To make a chest of drawers from matchboxes, it is enough to glue their planes, laying 3-4 layers, and paint them with bright colors. The upper surface can be decorated in one style, and the inner surface in another.

Consider how to make a sofa for dolls with your own hands from cardboard. For work, you will need, in fact, the cardboard itself, a synthetic filler, for example, foam rubber, and a fabric with threads.

Stages of work:

Take a dense material, cut it according to the pattern of a small rectangular box, 6x15 cm in size.
Make a similar figure, but with dimensions of 2.5x15 cm.
We stuff foam rubber into a larger box, leaving an open hole on top. At the same time, the filler must be well compacted.
To assemble, place a small product on the end (this will be the back), glue it to the back of the resulting soft seat.
We take a beautiful fabric and make upholstery, fitting furniture with it and making marks for the size of the future cover.
Cut the fabric according to these markings and sew it, leaving a seam at the bottom.
To further fix it, you can make small holes on the surface of the cardboard for threading the strings, or simply nail the fabric with a stapler.
You can add accessories by sewing small pillows or bolsters.

Plywood nightstand

To make a bedside table or chest of drawers for dolls with your own hands, you will need:

thin plywood;
1. jigsaw;
2. sandpaper;
drawing tools (pencil, ruler, eraser);
1. PVA glue;
2. acrylic putty;
3. acrylic paint white
4. colors;
branch from a tree.

Important! In the presented master class, the size of the finished product will be 14.5x16x6.5 cm. Knowing how to make a bedside table for dolls of this parameter, you can choose the dimensions of your choice.

Action algorithm:

We apply drawings of details (rear wall, 2 side walls, 3 shelves and a cover) on plywood.
We cut out the details and clean them with sandpaper.
With the help of an awl, we make holes on the back wall, into which a file is then placed, fixed on a jigsaw, and a cut is made.
We attach the side walls to the back wall, while gluing the joints. As a result, we got a box in which it is necessary to place the shelves.
Glue the lid on the top of the product.
We disassemble the entire structure and apply PVA glue.
After waiting until it dries a little, we collect the chest of drawers back.
Cut out rectangles for drawers.
We glue the boxes and process them with sandpaper.
We place these drawers in the chest of drawers, and make the front side.
We make handles for them from a tree branch, sawing it into pieces and gluing it in the right place.

Important! If the drawers don't slide well, wax them.

Do-it-yourself furniture in the dollhouse is ready, you can add it with accessories, for example, a sink mirror.

House furniture

How to make furniture for dolls with your own hands from cardboard, consider the example of a miniature dressing table made from cardboard packaging. For work you will need:

cardboard packaging, for example, from hair dye;
scissors;
ruler;
pencil;
foil;
stationery glue;
paper colored or decorated.

To understand how to make furniture for dolls, follow the instructions:

Cut the box to the required height.
Make a mirror scheme on the cut off part, which coincide in width with the table.
Cut out the blank and glue it to the base.

Important! The top edge of the mirror can be patterned or rounded.

Paste the future table with paper.
Drawers and doors can be drawn on the product.
Cut the mirror and handles out of foil.
Stick the elements on the table.

Now you know how to make furniture for dolls with your own hands, and you can decorate the interior of a toy house to your taste - it all depends on your imagination and free time.