Heat protection - glue sunscreen on the window. Signing protection: Choose a mirror film on the windows how to stick a reflective film on the window

And because of her at home, it is simply impossible to be, you have to save all possible ways. One of the easiest options is to protect windows. We will analyze how to glue the sunscreen film on the window.

Choose a film and glue it to the window

Views

In the store now you can find several types of windows on the windows and each of them will serve for certain purposes. In total, one can highlight three main types.

Protective

Such a film is designed to make the glass stronger and simultaneously darken it. She is well suited to those whose apartments are located on the first floors. So you get rid of your accommodation from prying eyes and secure it.

Matte

It is mainly used for interior doors and partitions. But she can be used and on. For example, for windows in the bathroom or toilet. In addition, it also has the ability to reduce the intensity of sunlight.

Sunscreen

Usually it is done with a mirror effect to minimize the penetration of sun rays in the apartment and heating. On hot days it will be a good addition for lungs or blinds.

The main advantage of such a film is that it does not darken the glass and does not reduce visibility from the inside, while outside to see what is in the room is no longer possible.

Advantages and disadvantages

Any product during operation is found both pluses and cons.

Benefits

Thanks to her, the room does not heat up on hot days, so you will not have the need to use cooling devices and you can save on electricity.
In winter, it will restore heat inside and will not give glazing to cool quickly. Such an effect is achieved due to aluminum spraying.
It protects wall coverings, floor and furniture from burnout due to direct sunlight.
It does not get dirty and does not accumulate dirt, unlike the curtains.
Products with various shades, such as bronze or gold, will look very stylish outside.

disadvantages

The product is very thin and easily damaged when installing.
Cheap option can spoil your glasses. Under the influence of the Sun, the coating literally dares to the glass and remove it is then very difficult. Therefore, when choosing protection against sunny best, it is important to take into account not only how to properly stick the sunscreen film on the window, but also the material of what quality to choose.
She does not save from curious eyes in the evening, because due to internal lighting the glass will be shunning. Therefore, if you live on the first floor, remove the curtains will not work.

How to stick the sun on the windows

You need

Pure water. We advise you to use bottled water, because it does not contain impurities that may remain in the form of a sludge on the glass.
Fabric without a pile. Similar fabric can be found in a business or automotive store.
Wiper, not leaving divorces.
Rubber and metal spatulas.
The pulverizer with soap solution.
Sharp scissors.
Stationery knife or blade.
Big ruler.
Film itself.

Before gluing the sunscreen film on the window, in the room. This is especially true of those who have pets. So you can avoid getting wool on the glued surface. Repair work or laying asphalt on the street can also interfere with installation, since the flying dust will cause a lot of difficulty hazard. We advise you to wait for the end of the repair.

Observe and certain temperature regime. The optimal temperature for such works is 25 degrees of heat. If the room is cold or there is a draft, then the glue will dry for a long time. Also try. Thanks to this, the product will fall uniformly and neatly.

Preparation of glass

To begin with, the glass must be thoroughly wash with soap solution, then clean it with a special fluid to remove all divorces.

Special attention is paid to the edges and corners. If they have strong contaminants, they need to be removed with a metal spatula or scraper.

Inspect the glass for the presence of villi and hairs. Because of them there may be unpleasant bubbles.

The process of pasting

After cleaning, make a cutting material. Do not forget to leave 3-5 millimeters from the edges, which will subsequently trish. You need to cut a very sharp scissors or blade. If the roll is very narrow and it lacks it on the width of the entire glass package, then the product will have to glue the jack at an invisible place.

For greater convenience, place the material on a pre-prepared surface, for example, a board that is not sorry to scratch. Then put a ruler on it and make measurements, after that, holding the line, spend the blade along it. So you will achieve an ideally flat cut line.

To determine which side to glue the sunscreen film on the window, look at the material in the roll. The protective layer on which small instructions can be written, always adjacent to the adhesive side. It must be applied to the glass.

Now sprinkle on the glass from the pulverizer. From the cut blank, remove the protective layer and attach gently to the glass. It is now important exactly and gently distribute it throughout the window perimeter, the rubber spatula will help you.

Moisten the product and on the reverse side so that the spatula is better slid and accidentally cut the coating. Smoothing material is necessary from the center to the edges. The stronger it is pressure, the more moisture will work and work will dry faster.

Cut the surplus material and leave the surface to dry. All is ready.

Detailed process can be viewed on video.

Elimination of defects

Even when complying with all rules and a clear performance, you can face some troubles. There are several ways to solve them.

If you notice bubbles on the finished surface, you can try to distribute the spatula to the edges. However, this does not always help. In this case, pinched this area with a needle and put the material.
Do not scare muddy spots. This may be a soap solution, which is evaporated with micropores under the influence of the sun.
In the hot season, you can face the problem that the product is very fast and unevenly sticks to the glass. To avoid this, weanly wet the adhesive surface with water.
A large amount of garbage and dust will not work under the material. Work in this case will have to redo.

Care rules

In order for the product to live for a long time, you need to follow the elementary rules of care.

Do not touch the film after installation within a month, otherwise it can slip. This concerns and.
For cleansing, do not use aggressive chemicals, rigid sponges and washcloths. They can leave stains or damage the coating at all.
If solid contamination appeared on the surface, it is better to safely remove the rubber spatula.

Material prepared: Julia Vegan

The use of a special protective film from the sun on the windows is a deliberate and rational solution for many apartmentmatic and private houses, windows in the premises of which come to the sunny side. Choose it, as a rule, to protect against sunlight and outsiders.

Important! Toning with such a film is a relevant and even trend solution that has been distributed in Europe and the CIS countries.

If a person lives on the first floor, you can hide the inner space of an apartment from prying views with the help of dense dark curtains, blinds, but often with the use of all these funds there are certain difficulties, because it is not always possible to hang heavy dense curtains or order installation of blinds on window.

Therefore, as an alternative to curtains and blinds, you can consider the film, which can be glued on the windows of any type. It can be glued without any problems independently - without resorting to the help of specialists.

Therefore, glue the sunscreen film on plastic windows yourself, savings occurs already at the stage of buying and installing the product. The acquisition of curtains or installation of blinds is the cheapest event, while the film sunscreen will be cheap. You can glue the mirror film on any types of windows: wooden, plastic, aluminum.

Companies that are engaged in the manufacture of similar protective film products assure that their products gradually displaces cumbersome and uncomfortable blinds from the market.

The film has the following advantages:

The ability to regulate the level of illumination of the room.
Ensuring the protection of placing plants from direct sunlight.
Ensuring the protection of the curtains from ultraviolet exposure and burnout (which is relevant, if color curtains).
Ensuring the protection of furniture upholstery from burnout.
High level of safety, housing protection against hacking and unauthorized penetration.

Important! You can glue the film on the windows yourself - it is glued by itself, so no additional adhesive compositions will be used.

Before glueing a protective film on the windows, it is necessary to figure out which kind of film material is worth purchas, because Several species of such products are sold at the stores.

Taking into account the requirements for the functions of the film material, the following types of products can be distinguished:

Automotive.
Architectural.
Decorative.
Protective.
Sunscreen.

Glue the self-adhesive film can be on the windows of wood or plastic. Production of products of this type is carried out from polyester. This polymer substance provides complete transparency of the film material, a high level of its elasticity, as well as decent strength.

If it was decided to glue a film on the window, then when the model is selected, it is worth considering that products may have a different number of layers (single-layer, two-layer, multilayer materials), various composition of each layer (for example, polyester and other types of polymeric materials), coloring pigment substances ( To give a product of certain color characteristics).

Professional films for home use is not recommended to buy, as it is unreasonable to glue such a tonor film on the window in the house, because it costs it more expensive, and all its functions will not be used anyway.

Professional film products have the following features:

The outer layer performs protective functions, internal layers - workers.
Protective layers are metallized, there may be several of them. Depending on the number of protective layers, the level of strength of the product is established.
In the process of manufacturing metallized layers, aluminum, bronze, titanium, nickel spraying, in special cases - gold or silver spraying can be carried out.
In appearance, professional film materials can be matte, mirror, transparent, color, snow-white, monochrome, with an image or decorative effect.

Before gluing a self-adhesive protective film on the glass, it is necessary to deal with its gluing technology. Works can be performed if the glass is removed - everything will be done better. If the window profile stands on the spot, then the likelihood of deterioration of the quality of work and the appearance of splashes angles with time is high.

It is necessary to stick the protective side to the outside - it will reflect the sun's rays. If the film is a glued reflective side inside, it will not be able to perform half of its functions.

What tool will need?

If it is supposed to glue the film on the glass in the window profile, then you will need to use two scrapers at once. The first scraper is standard, which usually wash the windows. It has a rubberized edge, so no traces on the glass remains. The second scraper is to clean the glasses, so it is equipped with a sharp blade.

Also, if it was planned to glue the film on the windows from the Sun, the next set of tools will be required:

Standard stationery depotable knife.
Spray.
Paper towels or microfiber fabric.
Rubber spatula or plastic large width so that it can cover the large area in one movement.
Household detergent not containing aggressive and abrasive substances.

On video: Toning windows of apartments with a mirror film with their own hands.

What needs to be taken into account before glue film?

If there is no understanding how to glue a protective self-adhesive film on glass, it is recommended to look at the following recommendations:

Works must be carried out at a positive air temperature (range - from +5 to +35 o C). Otherwise, the adhesive composition will dry long.
Air humidity also should not be too low or high. If the humidity is above 80%, then it is not recommended to glue the film, because After a while she will surely go away. If the humidity in the room is insufficient, then the sprayer is used to increase it.
Before glueing the film on the glass, in the room you need to perform high-quality wet cleaning so that there is less dust in the air. The glass surface itself needs to be thoroughly washed and cleansed from dust before sticking.

Before properly glue the film on the window, the surface being processed must be prepared.

For this purpose, the following is done:

First you need to wash the glass with a non-aggressive detergent, after which it is clean water to wash off its remnants along with mud and dust.
Then you need to use the scraper to remove the contamination from the sealing parts of the window and the surface itself (especially you need to walk along the edges and corners). If a window is made of wood, then you need to remove and clean the strokes.
After washing, the glass surface must be carefully cleaned and wipe.

First of all, before gluing a film on the window, measurements are performed. It is necessary to consider the cutting so that the waste is minimal.

If during the measurements it was found that the widths of the film are definitely not enough to treat the entire window surface at once, then it will be necessary to choose the least noticeable junction. It is very good if it will pass through the existing edge, and not in the zone where the film material was cut.

Important! In the process of cutting, it is necessary to leave the allowance of 2-3 mm.

Before gluing the usual or stained glass, it is necessary to moisten the glass with clean water (can be ordinary from the bottle), mixed with a small number of children's shampoo.

A protective layer is removed from the film material, the film itself is placed on a flat surface. It is necessary to ensure that different sections do not glue with each other. If this happened, the film material will not be suitable for use.

Important! Before removing the protective layer, it is recommended to cry the edges using adhesive tape and fold strips with each other. In this case, you can remove the protection as simple as possible.

Next, gently glue the film on the glass surface, holding it by the edges. In this case, it is necessary to take into account that it is predeforeced to be slightly moistened and the film material, and the glass to glue it easier.

3. Align the center to the edges.

4. With the help of a stationery knife, it is necessary to cut off the edges that hit the area of \u200b\u200bthe glass surface.

5. At the next stage, you can adjust the location of the film material, if it is incorrect somewhere. After the moisture remains under the product, the adjustments will not work. In conclusion, with a spatula, you need to drive out all the water.

After you need to leave everything, as it is, for complete drying. The duration of this process can be 7-10 days. Gradually, the film material will begin to brighten and becomes more transparent, because Water will evaporate.

Important! The air bubbles should not be removed, because they should disappear by themselves.

How to choose the right film?

In stores you can find different types of films for adhesive on the windows.

If you decide to stick on your own, then when you select the model, you need to consider the following:

The glued film material will result in the lighting level of the room below. Therefore, it is recommended to choose an option in accordance with your needs - stores present models with different degrees of light source.

If a drawing is applied to the film material, then you need to choose it in accordance with the interior of the room. For example, if the interior is performed in a standard style, then films with flowers and plants, stained glass and other decorative elements can be seated. If the interior is made in one of the modern styles, then the excellent solution will be geometric patterns and abstractions.

Important! Film materials sometimes combine to get interesting design solutions. But the film should be glued in this case.

If the film is glued to the film, the choice of material for work should also be entrusted to specialists.

Usually they themselves offer several types of products that are suitable for performing certain functions.

The stores present different types of protective films whose functionality can vary for serious limits. With their help, it is guaranteed to protect the room from unauthorized access.

Film materials may have the following types of protective characteristics:

From weapons. If a shot of a pneumatics or traumatic pistol occurs, the film material will be able to easily withstand such a mechanical impact. Unfortunately, no film will be able to protect from the metal bullet, but it will be able to slow down.
From hacking. The housing or office is protected from unauthorized penetration - glass will be difficult to smash, because the film material, if it is glued correctly, it will be extremely difficult to damage. He will be able to withstand continuous strikes. The level of resistance, depending on the product manufacturer, will vary from 30 to 190 kg / cm 2.
From listening. Specialized models that significantly reduce the vibration of passing sound waves. If there is a conversation in the room, then it will not work out from the outside.
From fragments. High-strength film materials that delay flying and penetrating fragments in the windows.
From child exposure. The presence of this film material will allow not to worry about the fact that the child will be able to break the window and fall out of it, or bother with fragments.
From heat loss. Models of this type are necessary to reflect ultraviolet and infrared radiation, so their application allows you to preserve heat in the cold season, and in the summer months - to provide coolness. The light transmission of such models is about 90%.
From fire. If the fire is developing on the street, then the fire is guaranteed to pass through such a film material (relevant for private country houses).

Protection classes

All types of protective films can be classified according to their protection classes, which are determined by the thickness of the product:

A1 (thickness up to 0.24 mm), withstands the mechanical impact of 3.5 J.
A2 (thickness up to 0.412 mm), withstands the mechanical impact of 6.5 J.
A3 (thickness up to 0.6 mm), withstands the mechanical impact of 9.5 J.

The use of a protective film is a rational and correct decision, if there is a possibility of hazardous to housing or people who live in it, situations. Such products are inexpensive, but are able to provide high-quality protection against hacking, unauthorized penetration, effects of fire, heat loss.

How to beat the sunscreen film on the plastic window (2 video)

Glue sunscreen films (20 photos)

In the summer, when the hot sun penetrates the house through window glass, many people have a desire to protect themselves from such an impact. An excellent solution in this case will be a sunscreen film.

It is worth noting that this method will help not only protect against the sun, but also closes the overview for outsiders, which sometimes look into your windows. Especially relevant to use the film will be if you live on the lower floors.

Properties of protective film

The sunscreen film has a mass gain, which you can make sure during use. The modern market offers its customers many different options that can be used for home, office or other premises.

To create sunscreen properties, it is necessary to make layers of the following materials:

metal coating;
using aluminum;
layer of titanium.

All of these components are able to reflect the sunlight. The film absorbs heat, but the properties of the transparency of the glass remain the same.
This option is able to ensure not only the protection of the room and the interior from ultraviolet radiation.

When using the film, homemade pets will be created comfortable stay, the active growth of plants does not stop.

The properties of reflection and absorption of radiation by this material are 90%. With the help of the film in the room there will always be a normal temperature, protection against ultraviolet exposure is guaranteed.

Modern manufacturers produce variants of various shades. The differences between many films consist in tinting.

The main types are medium and highly efficient options. The selection of each of them depends on the degree of exposure to solar radiation.

Mounting process

You can stick the sunscreen film on your own.

First you need to thoroughly wash the window on both sides.
Next, using a spray gun, the film needs to be treated with a solution of soap (desirable liquid), diluted with water. Application should be only on the one hand. Thus, you can safely move the product around the glass until you achieve the desired position.
Then the film must be applied to the surface. As soon as the product was fixed on the glass, you need to smooth out the defects with a spatula.

After that, the film should dry. The final stage will be removing excess material before getting the desired size.

In this video, you can visually see how to stick the sunscreen film on the window:

In a multi-storey building on the top floor, it is not easy to escape from the heat and heat. Someone installs darkened glasses, but not everyone has the opportunity to choose this option. Therefore, there is a completely modern and affordable solution - a mirror film for windows. What is the features of such a film, which kinds are and how to glue it correctly, as well as other details and useful recommendations - all learned from this article.

Features

The mirror film is ideal for any window. This is the best solution for those who want to live and work in a comfortable environment, as such a film allows you to keep the coolness in the room. Now in heat and heat do not have to use cooling appliances, which will allow to significantly save on electricity. And in the winter season, such a film will easily retain the accumulated heat indoors. You can also forget about the dwarped windows with this modern material.

With such protection, you will be reliably protected from harmful UV rays, and the rooms will not overheat in the hot season. In addition, the furniture that is closest to the window will not burn out, will not fill out wallpaper, paintings and home plants will always be in comfortable conditions.

As a rule, this material is manufactured using polymers, thanks to which the strength of the glass itself is significantly increased. In addition, such a film will not allow random passers-by see what happens outside the window inside the room during the daytime. But inside the street will be perfectly visible.

It is worth noting that despite the fact that all types of such protective materials for windows are considered tinting, the lighting in the room will be the same, and the day will not have to use the additional light source.

Such a solution for windows allows you to give any building a special kind, to make it more attractive. The material is completely non-toxic, does not distinguish any harmful substances. And thanks to the anti-reflective effect, the eyes will not be tired, looking out the window.

If we talk further about the advantages of this product, it is worth mentioning that, thanks to the film, the salary glass becomes shockproof. In addition, in case of breaking, there will be no dangerous fragments. It is important to note the fact that outside the glass will be broken almost impossible. It will protect your home from hooligans. For personal safety and unexpected situations, this is very important.

Another advantage of this product is that its price is quite accessible. Therefore, many prefer precisely this material.

Views

To date, in specialized stores, you can find a large number of different films that are designed to protect the window. Most often there are conventional sunscreen options that are attached using adhesive means. And someone does it with the help of Scotch. But there is a self-adhesive film that is much more practical in use.

Sunscreen can also be different. Many of them are not only protected from the Sun, but also have other qualities.

It may be reflectivemodel. Such a product is guaranteed to reflect the minimum of fifty percent of sunlight. They are different: blue, bronze, silver or green. This option is made very budget and secondary in efficiency. You can find a similar product with high efficiency. Such a film is capable of reflecting the sun's rays is almost one hundred percent. You can always find all the detailed information on the packaging of the product to make the right choice.

Energy saving option - This is a protective film that reflects the sun's rays, and also produces heat filtering. As a rule, this option is installed on the inside of the windows.

There is still protective or, as it is also called, shockproof model. As you already guessed, the main advantage of this option is that the film reliably protect the glass from any external damage and will make the glass more durable. When breaking no fragments will not be, the pieces of glass will remain on the film.
Decorativethe model will allow not only to protect the room from the heat, but also give a special style to the boring window. Such a film can be with a completely different pattern. It can be natural motifs, abstraction, geometric shapes, and so on. There are even models that resemble luxurious stained glass windows. The surface of such models is often matte. The only minus of this option is that it is unable to perform his functions a hundred percent. That is, such a film unevenly passes and reflects the rays of the sun. Often, decorative models without drawings come across. As a rule, they are all rainbow colors, and you can choose any color in order to give the room an unusual and attractive look.

Spacery It perfectly delays not only the sun rays, but also infrared radiation. Such a product not only absorbs heat, it reflects it without allowing you to penetrate the inside of the room.
Often you can meet such a description - architecturalfilm. Do not think that this is some kind of high film. Often, manufacturers call so all models of such a protective material for windows.

How to stick?

Of course, professionals will be able to quickly and qualitatively cope with the work, correctly glowing glass in your apartment. In fact, if you know all the subtleties, it is not so difficult to glue the film on the windows. Casting does not take you a lot of time, but will require maximum accuracy.

Usually this material is sold by rolls. Therefore, first will need to cut blanks. That is, cut off the film so that it fit for your window.

Remember that the billet itself should be slightly smaller than glass. This will make it possible to work better.

As soon as the workpieces are ready, it will be necessary to prepare the surface itself. You can glue a blank to dust and dirty glass, but the work will be poor quality and short-lived. Therefore, we recommend cleaning the glasses and degrease them.

After gently apply the adhesive to the glass itself. This means may well come up with the most common soap solution. It will need to be evenly applied to the surface of the glass. If necessary, remnants necessarily remove the sponge that should be at hand. Experts recommend pouring such a solution into a spray gun, which will allow you to easily and evenly apply liquid on the glass.

Further, everything is simple - the film is applied to the prepared glass and everything is ready. Casting is recommended to start from above, from one corner. After the film is already on the window, it will be necessary to smooth out "wrinkles" and correct irregularities, bubbles. Take any soft and dry rag, neat movements. Schedule the material on the surface of the window. It is necessary to do it from the center, gradually moving towards the edges. Such a simple procedure allows you to put the protective material on the glass as soon as possible. Then everything needs to be leaving for two or three days.

In the event that the film is self-adhesive, it will be much easier to cope with pasting. How to prepare everything correctly, described above. The only thing - you will not need to apply the adhesive tool. On the back of the film there is a protective layer, which will need to be gradually removed during pasting.

It is not recommended to shoot the entire layer immediately. To begin with, delete the layer at the very top, carefully attach the film to the surface of the glass and glue. There should be a band of centimeters at five. Then gradually removing the protective layer of several centimeters, the claface base and slowly move downward. To the film easily and properly lay, you can apply a silicone spatula. Gently smooth up the surface from above, and on the reverse side slowly disconnect protection. In this case, it is important not to hurry.

After you apply any of the selected types of protection on the windows, they will not need special care. This surface can be safely wiped with a clean cloth.

The main thing, do not use chemical detergents, as well as means with alcohol content. These aggressive substances will be able to damage the protective layer of the film.

As for the role of which the parties are to put the film, then there is no unambiguous response. Mirrored versions of such materials are often mounted on the outside of the window. It happens that the windows and inside are covered. Some specialists for greater strength mounted such products between the glasses. That is, inside the window structure itself, if it allows the window model.

Calculation of this material is recommended at a comfortable temperature. The room temperature and on the street should not be more than thirty-five degrees. The optimal option is twenty-five - thirty degrees of heat. In the event that cool, then the pasting will not be high quality, and the film will not be able to dry well. So, the overall quality of work will be unsatisfactory.

Every year, summer is becoming increasingly hot. This is especially felt in the rooms, the windows of which go to the sunny side. The heat chain can solve the installation of air conditioners. However, for those who have no funds on their purchase, the film on the windows from the Sun will be an effective and budget selection.

This article is devoted to the tint film on the window glass. Publications considered:

properties, characteristics of material;
its advantages, disadvantages;
instruction as correct;
care tips.

Product specifications

Foil for windows from the sun reflects sunlight. However, it can not divert the rays of the sun completely, only partially.

The reflective film applied to the windows contributes to the fact that the room heats up two times less during the daytime. It also serves as additional protection. Those who are interested in breeding domestic flowers glue foil on the windows from the sun to protect plants from overheating.

How to stick sunscreen on the windows from the sun?

The brilliant film on the windows from the Sun copes with its task only under the condition of proper application. If you do not observe all the principles of sticking, it will be a little sense from it.

Before working, prepare the surface of the windows. On clean glasses, the material will be better entrenched, it will last longer and will more effectively reflect the sun's rays.

Preparation of glasses

Before glue at home, you need to clean the glass with a scraper. To do this, use a tip model from rubber or another option combined with a sharp metal blade.

Glass is washed with water with diluted shampoo or liquid soap. On the floor-liter of water, it is necessary about one tablespoon of the means. The scraper cleans the emerged pollution. The main emphasis is placed on the corners and edges of the frame.

In more complex cleaning, windows with wooden frames need. They remove the strokes from them, clean them, and after they put it back.

Instructions like glued

Do not know how to glue a protective reflective film? To do this, first need to calculate its exact number. The measurements of each window are pre-performed, and the pasteing plan is compiled. The master must decide how to do it so as to reduce the cost of minimum. On each side you need to leave stocks of three centimeters, which are easily cut after work.

After cleaning the glasses of the algorithm of work:

Roll rolls on a flat and clean surface. The desired amount of suvereating film is cut.
Scissors or a very sharp knife cut the right canvas. If it is necessary, then the smooth cut can be traced by a ruler or roulette.
The glasses are wetted by soapy, spraying it from the sprayer.
The protective layer is removed. In order to eliminate the effect of glue for a short time, the coating itself is recommended to rack with water. This will help it easily stick it, because the material will not be tightly glued to the glass. Then the master will eliminate his shortcomings in time.
The upper part of the cut is applied by the adhesive side. Then carefully, not in a hurry, smooth to get rid of air bubbles and from the chances.
The rubber spatula carefully smoothes the surface, removing the air under the bottom. If he still remains, relatives the closest angle of the film and take care of the top, passing on top along the spatula site.
When the film is fully pasted, it's a spatula again. This time the master should remove excess water. It is necessary to bring it to the edges of the coating.
Remains and surplus are gently cut with a knife or scissors.

Care after sticking is no less important than the film itself. It can not be touched by his hands so that it does not change its location. Within a month, it is impossible to wash the glass so that it does not lose their protective properties.

A month later, washing is allowed, but the ammonia should not be in the composition of detergents. We do not recommend using rigid washcloths that can damage the material.