Warm floor Electrolux installation. Indisient advantages and advantages of warm floors Electrolux

Usually in the winter period in the premises, people walk in home slippers or woolen socks. Current radiators cannot guarantee a good heating of the room. However, walking up with the times, invented the warm floor of the electrolyuks, allowing forever forget about the cold flooring in his house.

The main advantages of the system

ELECTROLUX products are fairly in demand and abroad, which is due to innovative technologies for its manufacture. In order to analyze the cause of high demand, it is necessary to study in detail the principle of operation of such a heating system.

The heated cable is made of durable steel vein containing a thread from the armid. This material is a synthetic rigid fiber, steel is 5 times stronger. Due to this, the use of the armidight significantly improves the degree of cable resistance to various damage, cracking and stretching.

It should be noted that the veins are insulated with fluoroplast, which guarantees them better wear resistance and electric durability. In addition, the characteristic feature of the heated mats is their base impregnated with special glue, which provides good conditions for the connection and eliminates bubbles. The structure of the mat is solid and homogeneous.

Let us see the main advantages of the warm floor of the electric electrolux:

. the same and instant preheating of the entire room;
. automatic fixation;
. reliability;
. wear resistance.

Heat and comfort in the house

In practice, it can be seen that the use of mats, equipped with special heating cords, fixed with adhesive mortar, makes it possible to maintain optimal temperature regime in the floor zone. It should be borne in mind that the installation of the warm floor of Electrolux is simplified by the absence of the need to fill the design of concrete and make a screed. Installation of the system does not require special skills and special skills. All you need to know is how to locate and consolidate the mat.

In the process of connecting the thermostat for the heating floor, Electrolux should be madeable in the presence of resistance in the wires. The manufacturer releases a programmable version of the heat regulator with a "sensitive" display, allowing you to quickly respond to the instructions of users. The instrument makes it possible to set six modes with different temperatures during working hours and two weekend modes. In addition, there is a function of 6/1 or 7 modes for people with an unusual work schedule.

The device guarantees a cozy room in the room in any of the marked modes and saving electricity by lowering the heating temperature, if there is no one at home. Also in the knob there is a built-in display "Auto-linking" function for protection against unexpected pressing, it makes it possible to safely exploit the system indoor with small children.

The installation procedure is although quite simple, but there are some difficulties here. The main ones are the following:

. Punching with nail heating cord;
. Installing the thermostat in rooms with high humidity;
. Inaccurate contact connection in the device;
. improper placement of furniture, the dense adjacent to the floor surface, which prevents heat from dissipating;
. loading the heated area with bulky elements, which causes overheating of the system and the output of its failure;
. Lack of gap in the "floor-furniture" zone, which worsens free air circulation.

Consider the practical recommendations of the mounting of the warm floor under the Electrolux tile. Heating mats are installed in the already made tie. A glue solution is directly applied directly, providing a solid tile masonry, as a result of which it is not located on the working elements of the system, but in a reliable base of the floor. Heating mats are completely immersed in glue and practically do not cause low-level raising.

The probability of failure of such a heating system is insignificant, since it refers to the category of high accuracy. However, repair cases occur periodically. If for certain reasons it happened, the fault is not difficult to identify with the use of special devices with an accuracy of millimeters and quickly eliminate. In the damaged zone, in the presence of a standard Remkomplekt, you can put a spare coupling on the cable. At the same time, completely open the coating and repair does not have to.

Electrolux products are laid not only under the tile, but also other heat-conducting flooring (laminate, parquet). In any case, the safety regulations and installation instructions should be strictly followed.

If we talk straight, the price on Electrolux warm floors has never been low. This is due to the high production costs of raw materials and manufacturing technology, which allow you to guarantee a decent product quality and its continuous operation.

The system of heated floors of this brand is pretty simple and understandable in the installation. It is equipped with a detailed specification and instructions, where the nuances of installation works are explained in detail. The most time-consuming step is to lay the flooring and the connection of the design to the thermal regulator.

If there are no professional design skills of construction and connecting electricians, it is more expedient to invite specialists who will work efficiently and avoid traditional montage errors.

With the help of a warm floor in any house, you can create optimal conditions. For their device, it is best to choose the production of Electrolux products from the Swedish manufacturer. With the help of cable systems of different types, it is very easy to create a warm floor, which will be distinguished by reliability, durability and efficiency.

Advantages of Electrolux products

The warm floor of Electrolux is distinguished by a large number of advantages, among whom:

Electrolux heating mats

Heating mats - the best solution for creating a warm floor under the tile. For their laying, it is not necessary to fill the thick layer of the cement-sand tie, which significantly reduces the height of the room.

To fix heating mats, it suffices to use the usual tile glue with a layer of 1-3 cm. They are fitted on the prepared concrete base, which is also additionally insulated with thermal insulation with a foil coating. It allows you to reflect inside the room produced thermal radiation.

Video Instruction on Installation of Heating Matte Electrolux

The advantage of thermal mats of all episodes is that it is enough to simply put them on the entire surface of the base. There is no need to calculate the distance between the cable turns. They are securely fixed on a special substrate, which also eliminates their displacement after filling the solution under the tile. If necessary, these items can be cut to get a piece of the desired size. In this case, it is important to monitor the integrity of the cable.

Easy Fix Mat Series

The heating mats of the Easy Fix Mat series are equipped with a two-core cable with a thickness of 3.5 mm. This allows them to be installed under the tile or other floor covering without the use of a thick layer of solution for fixing.

In a model range of products from the Easy Fix Mat series, heating mats of different power and size are presented. The length of the elements for laying ranges from 1 to 24 m. The power of heating mats from this series ranges from 75 to 1800 W. Therefore, with their help, you can install outdoor heating as an additional and main.

Warm floor Easy Fix Mat

The area of \u200b\u200bone mat is also different and ranges from 0.5 to 12 square meters. m. Such a variety allows you to lay the Easy Fix MAT elements in any room, regardless of its configuration and size.

The advantage of heating mats from this series is considered:

Multi Size Mat Series

Heating mats from the Multi Size Mat series consist of a thin twin cable with a thickness of 3.5 mm. It is placed on an elastic base, which consists of a bandwidth of 0.5 m. They should be installed in 7.4-10 cm increments. Such a constructive feature allows you to change the area of \u200b\u200bheating elements directly during the stacking.

The installed heating elements are connected to the power cable through a special cylindrical type clutch. This node is required to connect a warm floor to such a device as the thermostat. One-sided connection scheme greatly facilitates the installation of the entire system.

FEATURES OF MULTI SIZE MAT series:

Eco Mat Series

Eco Mat mats consist of a thin two-cable cable that is fixed on a textile basis. It is more efficiently connected to the adhesive mortar and creates a solid monolithic design with it.

The advantages of the Eco Mat series are considered:

reduced degree of electromagnetic radiation. Warm floor Eco Mat can be installed in children's rooms, since it is completely safe;
the presence of external insulation of stitched polyethylene. This provides high stability of all parts to a detrimental effect of tiled glue or concrete;
the connection of heating mats to the power cable is carried out through a thin coupling, which allows not to increase the thickness of the solution to fix them;
wide range. Eco Mat Series is presented in different variations that differ in size and power.

Temperature regulators

The thermostators from the electrolyc are joined to the warm floor and allow control over its operating parameters. All devices are distinguished by modern design, reliability, ease of management and durability.

THERMOTRONIC BASIC.

Thermotronic Basic electronic thermostat is equipped with a mechanism for control over the heating temperature of a mechanical type. Adjustment range - + 5 ... + 40 ° C. Thermotronic Basic thermostat is distinguished by the following advantages:

the perfect combination in the appearance of texture and color solutions. This allows you to enter a thermostat in any interior;
the possibility of installing the desired temperature corridor for the operation of the warm floor;
the presence of a light indicator that displays the operation mode of the device;
the presence of a warranty from the manufacturer 3 years.

THERMOTRONIC AVANTGARDE

Thermotronic Avantgarde thermostat has features:

the presence of a liquid crystal display;
the ability to program the mode of operation of the warm floor during the day. The thermostat sets the desired temperature for each hour;
simple control;
the presence of several replaceable panels of different colors;
the thermostat operates in a wide range of temperatures - + 5 ... + 50 ° C.

THERMOTRONIC TOUCH

Thermotronic Touch series thermostat is different:

Twin Cable Heating Sections

Twin Cable heating cable is installed on a prepared base and lies in a thin layer of screed. Its power is 17 W per 1 sq. M. m. It is two-housing, which provides more efficient heating of the floor.

In the design of the cable there is a thin arid wire and three-layer insulation. For a warm floor, heating elements can be installed with a minimal bend radius, which will be relevant for rooms with a complex configuration.

Video: Video Instruction on the installation of the heating section Twin Cable

Transcript.

1 Warm floors Electrolux Catalog 2013

2 2 ELECTROLUX Warm Floors Warm Floors Electrolux 3 Assortment Rated Power Method Mounting Scope Application Optimally Floor Cover Material Compatible Heating Mats and Sections for Installing Indoors Easy Fix Mat 150 W / m 2 Wet Tile Glue, Thin Shrewing Paul Bathroom, Kitchen and Residential Rooms Tile, Stone Laminate, Linoleum, Carpet Multi Size Mat W / m 2 Wet Tiled Adhesive, Slim Tile Paul in Bathroom, Kitchen and Residentials Tile, Stone Laminate, Linoleum, Carpet Alu Mat 120 W / m 2 Dry or Wet Direct Installation Under flooring or in a thin tie floor in residential rooms Laminate, parquet, carpet, linoleum tile, stone Twin Cable 17 W / mp. Wet in the tie of the floor in residential rooms, bathroom, loggias Tile, stone laminate, linoleum, carpet history Electrolux Swedish Concern Electrolux is the world's largest manufacturer of household appliances and professional equipment. Since the foundation in 1919, Electrolux has created and presented consumers with many outstanding innovative developments in various fields. The main component of the success of Electrolux products for decades has been and remains its impeccable quality. In the production of the entire technique, the concern is guided by the Unified Principle: the difference in price is due only to the presence or absence of additional functions, but not distinguish as the quality of goods. The ELECTROLUX History is inextricably linked with heating cable systems, also known as "warm floors". For more than 10 years, the company has been inviting innovative solutions to heat the premises with a heating cable. During this time, unique products successfully sustained quality testing during operation and gained popularity worldwide. Today, Electrolux presents a new line of heating mats on the Russian market, cable sections and anti-icing systems for buildings and receiving areas. Electrolux products have a European CE quality certificate and meets all the necessary European and Russian standards: environmental standards with hygienic standards of fire safety standards with the highest energy efficiency indicators. Benefits of the Electrolux Brand: Product Development Taking into account the final consumer requests Variety of commodity groups Loyalty consumers to the Electrolux brand and professional experience The brand awareness is 70% view in network stores with household appliances investments in innovative development Slim Single Wire Cable 10 W / mp. Wet Antifrost Mat Outdoor 300 W / m 2 Wet Dry Step Mat Outdoor 300 W / m 2 Wet Antifrost Cable Outdoor 30 W / mp. Dry Frost Guard Pipe Cable 17 W / mp. Dry Thermotronic Basic Thermotronic Avantgarde Thermotronic Touch Tiled glue, thin screed or floor on lags floor in residential rooms, pipes, foundation parquet, laminate, carpet anti-icing systems for installation outdoors 16 A (3600 W) 16 A (3600 W) 16 A ( 3600 W) Installation in the road laying in stage or under the tile in an open way to the roof and in the drain on the outer surface of the pipe thermostat the hidden installation in the mounting box driveway tracks, the pads of the porch, the tracks concrete, the stone concrete, stone, the tile concrete, stone, Tile Asphalt Asphalt Roofs, Drains - - Heated Pipes - - Warm Systems Programmable Warm Systems For 24mable Warm Systems For a Week Tile, Stone, Parquet, Laminate, Carpet Tile, Stone, Parquet, Laminate, Carpet For Day Tile, Stone , parquet, laminate, carpet for a week

3 4 ELECTROLUX Warm floors Warm floors Electrolux 5 Warm floors Electrolux: a new generation of cable electrical heating systems The high quality standards of modern housing dictate strict requirements for the temperature of the floor covering, because the floor is the surface in a room with which a person is most often in direct contact. It is from the floor that the feeling of heat and comfort in the house depends largely, which is especially relevant for countries with temperate climates and a sharp daily drop of temperatures, such as Russia and the majority of the CIS countries. In cities, the problem becomes more acute during the offseason, when the heating season has not yet begun, and the house is already cold. Additional difficulties creates often weak thermal insulation of houses, especially class "Economy". Standard convection heating systems do not always provide a sufficient amount of heat in the room. When using them, the air temperature at the head level reaches C, while the temperature of the floor remains low - the order of C. With such a heat distribution, the person has discomfort: the floor is cold, and in the indoors itself is stuffy. The temperature of the floor covering C, and the temperature at the head level near C is considered more natural and optimal, and the temperature of the temperature is established that such a ratio of temperatures creates a feeling of comfort, reduces convection streams and does not cross the air indoors. Among the main advantages of Electrolux products should be noted, first, direct heated floor surface. The direction of the heat flux from the bottom upwards throughout the area and the heat distribution in the vertical direction creates a natural feeling of comfort. Secondly, compared with concentrated heat sources (radiators, convectors, fireplaces, furnaces), warm floors create much less convection flows, drafts, which, among other things, means less dust in the air. Thirdly, the only visible element of the thermostat system. The heat source is hidden under the floor, freeing the place to accommodate furniture and implement various interior solutions. Fourth, due to the lack of direct contact of the heating elements with the atmosphere, the air is not overwhelmed. At the same time, humidity in raw rooms, such as bathrooms and hallways, are ideally regulated, and this is a guarantee from the formation of mold. 26 Fifth, the specified temperature is automatically supported. Heating mode can be programmed. Well, finally, the service life of electrobolux cable systems for more than 50 years, and they are not required to maintain. Warranty period of 20 years. In addition, the device of warm floors is an ideal solution for residential and industrial premises of the middle and small area. Without cluttering small rooms with massive heating devices, it is possible to effectively solve the heating problem. Moreover, due to the device of warm floors from any, even budget housing, consumer qualities are significantly increasing. And, of course, no full overhaul of the apartment, as a rule, is not necessary without a warm flooring device. Unlike water heating systems, it is not necessary to obtain coordination from the Housing and communal services to install cable systems, there is no danger of leakage, there is no risk to pour neighbors, it is easier to control the temperature. Mounting cable systems are easy and simple, besides, their service life is much larger than that of water. Thus, modern ELECTROLUX solutions set a new level of quality, reliability and efficiency. And most importantly, with the warm floors of Electrolux - in your house will always be warm, whatever happens. As practice shows, no heating system provides such uniform heating as a warm floor. Given the experience of the best world manufacturers, Electrolux brought to the market a unique line of technically advanced, universal and easy-to-use cable heating systems. Distribution of convection flows in a room with a traditional heating system with radiators of the heating floor of Electrolux - heating mats, cable sections for floor heating and modern Temperature regulators are capable of creating an ideal microclimate and maintain optimal heat distribution in the room throughout the year. From the freezing of pipes, education icicles or ice house reliably protect the anti-icing systems Distribution of convection flows in the room with a heating system "Warm floor"

4 6 Electrolux Warm floors Warm floors Electrolux 7 Main advantages of heating cable systems Electrolux 35% Insulation from fluoroplastic The insulation of the heating veins is made of fluoroplast, one of the most famous names of which TEFLON (R). Fluoroplastic is distinguished by a wide range of mechanical properties, good dielectric properties, high electrical strength, low wear characteristics. In addition, it is racks to the effects of various aggressive media at room and elevated temperatures, weakly gas permeable, self-spouting during fire, has high durability during heating (up to 300 seconds). The use of fluoroplastic insulation provides maximum safety and reliability characteristics with a minimum cable thickness, and also increases the resistance to local overheating. Innovative textile base Unique textile base of the ELECTROLUX EASY FIX MAT series of heating mats is made on the basis of a tissue impregnated with a special adhesive composition forming ideal conditions for adhesion with concrete and tiled glue, eliminating the formation of air bubbles in solution and cracks in a tie, creating the reinforcement effect of the floor . Innovative technology allows you to climb the heating cable into a textile base, which provides a single structure of mats. The textile base, unlike the base in the form of a mesh from fiberglass, during transportation or long-term storage is not deformed, and the mat on the laying perfectly falls on the surface of the floor without the formation of bugrov. Also, with small shifts, the part of the mat to the side does not rise to its level: it is evenly distributed over the floor surface. A unique stretching base up to 35% Woven base of the MATI SIZE MAT Size Mat is made in the form of elastic bands, due to which it is possible to stretch the laid mat, increasing its length up to 35% of the initial one. At the same time, the power of the mat per unit area of \u200b\u200blaying is changed. The variable power range of the MATT from 150 W / m 2 to 111 W / m 2 opens up new features for optimal heating of the floor in the room of any type. In addition, the reduction in power allows the use of a mat for mounting into a screed for wooden floor coverings. If desired, mat can be stretched only in certain areas, thus forming local zones with different heating intensity. Three layers of insulation in ELECTROLUX cable products use an additional second layer of insulation of heating lived. Thus, three layers of insulation are used: the individual insulation of the heating veins, additional waist isolation and the outer shell, which during the entire service life reliably protect the heating elements of the veins from damage, depressurize and penetrate moisture. The second layer of insulation, overlaps any possible defect (for example, microcracks) in the first layer. Double and reinforced isolation provides better resistance, withstanding up to 4000 in the punch voltage. The outer sheath of the heating cable is resistant to the effects of the chemical composition of concrete and tiled glue. This provides a long service life of Electrolux heating cables. Aramid 25. C Aramid Synthetic Fiber High Strength The Base of the Electrolux heating cable is unique lived from aramid yarns. Aramid, also known under the Kevlar brand (R), is a synthetic fiber of high mechanical and thermal strength. Aramid fibers do not conduct an electric current, do not have melting points (destruction begins only at 500 seconds), are characterized by high mechanical strength. This material is 5 times stronger than steel and is used in the manufacture of body armor, flame retardant clothing and reinforcing tires. Ultrasound aramid veins provides the highest characteristics of the strength of the Electrolux cable products. Variable laying form Innovative ELECTROLUX solution Elastic Multi Size Mat on a textile basis. Mats on an elastic basis, unlike mats on a rigid grid, make it possible to vary the form of laying: from the usual rectangular shape to laying in the form of a rhombus, arc or trapezium. Thus, it is possible without cutting a mat to get around all the "obstacles" and install a warm floor in the rooms of a complex configuration. It is very convenient for the installation of warm floors in rooms with non-standard sizes, for example, in bathrooms, hallways or kitchens with large stationary techniques. For mounting to the floor, special fastening elements included in the kit are used. The touchscreen display following global trends in the field of digital technologies, Electrolux creates the thermostatronic touch series thermostat with a touch display that has an intuitive interface instantly responding to user touch. A large graphic screen with a pleasant blue illumination displays the air temperature, the current time, as well as the system status (it is on or not). The presence of the embedded menu helps to control all the thermostat functions just as when using a smartphone. Thus, thermostators with touch screens of the THERMOTRONIC Touch series are highly reliable, possess an intuitive interface. A set of programming functions allows you to customize the system under your rhythm of life and help reduce electricity consumption. Ergonomic design interior of any residential or working room to a certain degree of ergonomic, which is achieved through effective management systems. All of them are aimed at ensuring that the interior items constantly delivered a sense of comfort. When developing Thermotronic Basic thermostat, Electrolux trademark, considerable attention was paid to a harmonious combination of texture and color solutions. As a result, it made it possible to perfectly enter it into any designer solution - from the classic to the technological High Tech. The form of the thermostat and the control system is most convenient for the user. The device is obliged to use high-quality materials, as well as painstaking work of designers and engineers.

5 Warm floors Electrolux 9 8 Electrolux Warm floors Two heating conductor under any coating of both cores are heating, the load is evenly distributed on each of them, which increases the service life of the cable. A warm floor kit can be laid under any types of floor coverings: tile, laminate, parquet, carpet. Braided copper screen self-adhesive surface in accordance with the requirements of international safety standards, the cable has a braided copper screen for grounding during operation. By applying adhesive composition on the entire textile basis and three special adhesive tapes, the heating mat is reliably fixed during the laying on the floor surface. This prevents the displacement of the mat while applying tile glue. The minimum bend radius design allows you to exercise a cable without risk of cliff or a snomle. This is achieved due to the unique design of thin twisted heating veins, the length of which exceeds the length of the cable by 6%. With any deformations or stretching, the main load falls on aramid core, and heating conductors easily adapt to changes in geometry. Warranty 20 years Warranty warranty for heating mats and Electrolux cable sections 20 years. At the same time, the service life of cable systems of electrical heating is more than 50 years, and maintenance is not required. Increased tensile strength The cable in the screed or tiled glue during heating and cooled is constantly experiencing loads of various orientation: axial, radial. It is very important to prevent the heating elements from these effects. The basis of the ELECTROLUX cable is aramid, due to which it withstands the load on the gap to 200 Newtons. Simple installation. Installing equipment does not require special skills and knowledge. Laying without a screed set of a warm floor is designed for laying in a layer of tiled glue or mastic without using a screed. This method reduces to a minimum value of the floor lifting level. BI-METAL SENSOR Bimetallic sensor The programmable thermostat makes it possible to install individual temperature modes per hour for a day. Heating pipes Automatic maintenance of temperatures Cable section of the Frost Guard Pipe Cable Series is designed for pipe heating. The device has the function of automatically maintaining the level of the specified temperature. Installation of temprerating up to 1 With the heating distribution of the LCD screen with a backlight using this thermostat, you can set the necessary floor temperature with an accuracy of 1 C. Each round of heating cable of the ALU MAT series is built into a double aluminum screen, significantly expanding the heating element, which allows you to evenly distribute heat along the floor area. This design is especially relevant to install mat under wooden coatings. Additionally, improved heat distribution speeds up the heating of the floor surface and reduces electricity consumption. Floor and air temperature sensor Included The thermostat allows you to install the corridor of the maximum and minimum floor temperatures. When cooled below the level of the installed minimum temperature, the warm floor will be turned on, when heated over maximum shut down. In addition to the floor temperature sensor on a wire, the thermostat is equipped with a built-in air temperature sensor. Connecting to a network 220 The heating mat has a power of 150 W per square meter of laying area, which is optimal to create a comfortable heating. The EFGPC series cable section is equipped with a standard fork for inclusion in the 220V network outlet. 25. Thin coupling design is equipped with a thin sealed coupling. It has the same diameter as the cable itself, which minimizes the size of the floor level lifting. CHILDREN PROTECTION The thermostat supports the control panel lock function to protect against small children. Ultraviolet protection The thermostat is equipped with a floor temperature sensor on a wire. Polyolefin outer cable insulation is resistant to ultraviolet and other atmospheric influences, which is especially important when the use of anti-icing systems. Intuitive interface Electricity saving The device has an intuitive interface. Anyone can easily manage the "Warm Paul" system without prior preparation and training: just just read the instructions. A programmable thermostat can save electricity consumption up to 30%. Temperature sensor included Laying in a screed thermostat is equipped with a contrasting LCD display with backlit. Installing the temperature corridor. Power 150 W / m 2 Warm floor set Twin Cable is designed to lay in a concrete tie with a height of at least 3 cm. Recommended height 5 cm. Programming During the day, the Frost Guard Pipe Cable series cable is equipped with a bimetallic sensor that adjusts the power of the cable section depending on Pipe temperature from +3 s to +15 S. Polyolefin Warranty 3 years warranty period on Electrolux 3 years. Switching current 16 A Anti-icing Systems The product is designed for the device of anti-icing systems outdoors. (3600 w) Temperature regulators Permissible thermostat workload: power up to 3600 W, current force up to 16A. Replaceable color panels are programmed by the days of the week The thermostat allows you to install a program for the weekdays, weekends, as well as for every day separately. The basic color of the thermostators "ivory". However, to create exclusive design solutions, it is possible to install replaceable color panels. The base color of the panel can be easily changed on white, silver or black (not included).

6 10 ELECTROLUX Warm floors Warm floors Electrolux 11 heating mats for the premises We thought that you need not just a warm floor, but an intelligent heating system that adjusts to your rhythm of life and creates an individual microclimate in the house. Universality and simplicity Being in a continuous search for innovative solutions and, at the same time, taking care of you, Electrolux offers universal models of heating mats that will become indispensable in any modern house. ELECTROLUX Innovations offers 3 series of mats: Easy Fix Mat - the most convenient and simple domestic solution, self-selection during installation due to adhesive layer, Multi Size Mat on an elastic basis, stretching by 35% of the initial length, and ALU MAT - universal mats In residential rooms for any kind of flooring. Among the main advantages of all mats are a quick and uniform heating of the floor surface, the installation into the tile glue provides a minimal lift of the floor level. Electrolux heating mats The most affordable way to make floors warm, as their laying does not require the bay of a concrete screed, calculating the power and step of laying the cable, as well as the availability of special knowledge. Not even by a professional builder, you can install the mat on yourself at home, in fact, simply spreading the roll to the desired area. Electrician help will only need to connect the system to the thermostat.

7 Warm floors Electrolux Electrolux Warm floors Easy Fix Mat Series MOD Square M 2 Power, W Mata Length, M Resistance, OM -5 / + 10% 0.7 1.3 2.6 3.2 EEFM, 7 EEFM, 2 EEFM EEFM, 8 EEFM, 4 EEFM, 3 EEFM EEFM, 2 EEFM Article EEFM, 5 EEFM EEFM, 5 EEFM EEFM, 5 EEFM EEFM, 5 EASY FIX MAT Series Self-adhesive heating mat based on fine twine cable. The two-housing heating cable is reliably woven into a textile grid, impregnated with a special adhesive composition, which reliably fixes the mat on the floor and creates ideal conditions for adhesion with concrete and tiled glue. Easy Fix heating mats are ideal for those rooms where it is necessary to maintain a small floor thickness. The main sphere of their use under the tile or natural stone, in the tile adhesive without a screed, as well as in the screed for any floor coverings: laminate, carpet, parquet and linoleum. Power 150 W / m2 Warranty 20 Years Super Employment Aramid Lived Simple Installation Insulation Fluoroplastic Thin Coupling Two Gray Explorer Three Layers Insulation Innovative Textile Basis Braided Copper Screen Increased Tensile Strength Styling Self-adhesive Surface Specific Specificity 150 W / m2 at 220V Textile Mesh Improved adhesion characteristics with concrete thin twin cable 3.5 mm self-adhesive base mat thin tight clutch, single-sided attachment cable type Two-tier power Mata 150 W / m2 cable power 11 W / m voltage 220 V, ~ 50 Hz width Mata 0.5 m thickness Mata 3.5 mm Cable Stamp 7.4 cm Power Cable Length 2 m for any ARAMID coating

8 Warm floors Electrolux Electrolux Warm floors Multi Size Mat Series Size MA 2 Power, W Mata Length, M Resistance, OM -5 / + 10%, 7 1.1 EMSM, 3 EMSM, 6 EMSM, 7 EMSM, 2 EMSM EMSM , 8 EMSM, 4 EMSM, 3 EMSM EMSM, 2 EMSM Article EMSM EMSM, 5 Multi Size Mat Series Superfine heating mat on an elastic basis. A unique stretching design allows you to change the length of the mat in the range from 10% to 35% of the initial, thereby changing the heating area and the power of the mat from 150 to 111 W per m2. Stretching and flexing Multi Size Mat, it is possible to vary the form of laying from the usual rectangular to a diamond or trapezoidal, bypassing any "obstacles". It is very convenient for mounting the warm floors in rooms with non-standard sizes. It is recommended for styling under any floor coverings, including under wooden. Specific power W / m2 at 220 V thin two-housing cable 3.5 mm stretch base in the range of 10-35% of the initial length Class form of laying area thin sealed coupling, single-sided attachment cable type Two-tier power Mata T / M2 cable power 11 W / m Voltage 220V, ~ 50 Hz Mat width 0.5 m Thickness mat 3.5 mm Cable laying step 7,4-9.25 cm Power cable length 2 m Laying without screed 35% Unique stretching base up to 35% W / M2 ARAMID Variable Power W / M2 Simple Installation Superfoot Aramid Conditional Validation Shape For Any Coating Insulation from Fluoroplast Warranty 20 Years Two Heating Explorer Three Layers of Insulation Thin Coupling Braided Copper Screen Increased Tensile Strength

9 16 ELECTROLUX Warm floors Warm floors Electrolux 17 series ALU MAT Article Square laying m 2 Power, W Length Mata, M Resistance, OM -5 / + 10% EAM, 33 EAM, 5 1.89 EAM, 67 EAM, 44 EAM, W / M 2 Power 120 W / m 2 Simple Installation Heating Distribution Warranty 20 years Series Alu Mat Universal mat under any kind of flooring: tile, carpet, laminate, linoleum. The unique patented design of the mat based on an ultra-thin cable and aluminum screens located along the cable allows you to evenly distribute thermal energy. Such a mat can be mounted directly under wooden coatings or carpet using the "dry laying" method, as well as the method of classical "wet laying" under the tile. ALU MAT has balanced power and improved heating characteristics by area, which eliminates the effect of the "heat zebra" and overheating in contact places with the heating elements of the mat. Dry and wet installation under any coating Specific power 120 W / m 2 at 220 V Super-thin cable 1 mm Universal under any floor covering Any method of laying Aluminum strips Distribute Heating Quick Heating Thin sealed clutches, single connection Additional electricity savings Cable type Single-core power Mata 120 W / m 2 cable power 7.5 W / m voltage 220 V, ~ 50 Hz Mat width 0.5 m Mat thickness 1 mm cable laying 6.25 cm Power cable length 3x2 m

10 18 Electrolux Warm floors Warm floors Electrolux 19 Heating cable sections for rooms We thought that planning repairs, you want to create a comfortable atmosphere for the whole family, regardless of the configuration of the room, using modern eco-friendly systems with minimal power consumption. Reliability Classic variety of warm floors systems Cable sections Electrolux, laid in a concrete aligning screed at the construction stage or overhaul. The basis of the ELECTROLUX cable is aramid veins, which is several times stronger than steel. Due to this, the cable maintains the load on the gap to 200 Newtons. Reduced tariff, and turning off the system during the daytime. Cable sections are ideal for floors with a complex configuration and can fit into concrete, tile glue or under stone. Three layers of cable insulation securely protect the heating elements of the veins from damage, depressurization and moisture penetration during the entire service life. The cable is resistant to the chemical composition of concrete and tiled glue. A flat hermetic clutch has almost the same diameter as the cable itself, which minimizes the lifting value of the floor level and reduces the likelihood of damage to the system. Battery effect The warm floor based on the cable section makes it possible to create a full-fledged heating system indoor with accumulating effect. Due to this, it is possible to significantly save electricity costs, accumulating heat at night when it acts

11 Warm floors Electrolux Electrolux Warm floors Twin Cable series Twin Cable Series Thin two-housing high power heating cable 17 W / m. Both cable heating veins are heating, which provides fast heating of the floor. The thin sealed clutch has the same diameter as the cable itself, which minimizes the lifting value of the floor level and reduces the likelihood of damage to the system. Super-durable aramid and three-layer insulation securely protect the cable from random damage and overheating throughout the service life. The cable is resistant to the chemical compound of concrete and tiled glue. It is recommended for laying in a concrete screed, suitable for rooms with a complex configuration. Cable Type Twin Cable Power 17W / M Voltage 220 V, ~ 50 Hz Cable Diameter 4.5 mm Cable Cable Length 2 m Powerful Universal Two-Roise Cable Running Power 17 W / M at 220V Fast Heating, Both Welings Warring Thin Hermetic Coupling , one-sided accession Reduced cable thickness 4.5 mm Any form of laying area Reliability and durability Heating area, m 2 at specific power, W / m 2 * Power, W (220V) Length, M resistance, OM -5 / + 10% ETC , 8 0.7 0.5 etc, 7 1.3 1.0 ETC, 6 161.3 2.5 2.0 1.5 ETC, 3 2.7 2.0 ETC, 4 96.8 4.2 3.3 2.5 ETC, 3 80.7 5.0 4.0 3.0 ETC, 1 60.5 6.7 5.3 4.0 ETC, 8 48,4 8.3 6,7 5, 0 ETC, 6 37.4 10.0 8.0 6.0 ETC, 5 10.0 7.5 ETC, 6 22.5 16.7 13.3 10.0 ETC, 1 17,9 20,8 16 , 7 12.5 Article Laying in a screed Minimum bend radius Fast heating time Three layers of insulation Two heating conductors Aramid Superfoot aramid veins Braided copper screen Power 17 W / m Warranty 20 years Increased tensile strength Thin muf Ta * The specific power is determined depending on the required type of heating: the optimal 120 W / m2 laying step 14cm; Comfortable 150 W / m2 Stitching 11.5 cm; The main 200W / m2 stack of 8.5 cm. Data are averaged, consult the seller for accurate calculations.

12 22 ELECTROLUX Warm floors Warm floors Electrolux 23 series Slim Single Wire Cable Article Power, TW Length Cable, M Resistance, OM -5 / + 10% area laying m 2 at 120W / m 2 ESSWC ESSWC, 7 2 ESSWC ESSWC, 3 4 ESSWC ESSWC, 8 6 ESSWC, 7 8 ESSWC, 1 9 ESSWC, 5 10 ESSWC, 8 11 ESSWC, 4 13 ESSWC ESSWC, T3 15 Slim Single Wire Cable Slim Single Single Cable Universal Application. Used to organize comfortable heating of the floor with any flooring and rooms with a complex configuration, as well as to protect against the fruit of soil and heating pipes. The average cable power on the pattern meter and small thickness make it the perfect material for laying under the wooden floor and soft flooring. "Invisible" coupling has the same diameter as the cable. Laying in a screed minimum bend radius laying without a screed three layers of insulation thin single-core cable 4.3 mm Raven power 10 W / m at 220 V thin "invisible" coupling under any floor covering for cost-effective solutions double-sided connection cable type Single cable power cable 10 W / M Voltage 220V, ~ 50 Hz cable diameter 4,3 mm connecting cable length 2x2 m braided copper screen warranty 20 years Aramid 10 W / M superfoot aramid veins power 10W / m thin coupling increased tensile strength

13 24 ELECTROLUX Warm floors Warm floors Electrolux 25 Anti-icing systems Everyone knows how many troubles can deliver slippery tracks, steps or icicles on the roofs. We thought about your safety and created highly efficient and modern anti-icing systems. Electrolux applications offer a complex of modern and reliable solutions to effectively combat the icing of the railway sites, stairs, roofing sites, soil, as well as to protect pipes from freezing. The warranty period for anti-icing mats and the ELECTROLUX Cable Sections is 20 years. The functionality of the ELECTROLUX solution is presented on the basis of heating mats and cable sections. In the first case, the mat is enough to simply embed under any pad, preventing, thereby, the formation of ice or snow cover. With such systems, you can safely forget about slippery tracks, clearing stairs and the danger of slipping. The second option is anti-icing systems based on cable sections, designed specifically for countries with a harsh climate. The cable has several layers of insulation and reliably protected from ultraviolet and other atmospheric influences. The household series of pipe heating solutions has a unique design that includes a bimetallic sensor that constantly measures the temperature of the pipe in the range from +3 s to +15 s, adjusting the cable power. The system is equipped with a fork, so in order to exclude the freezing of the pipeline, it is enough to turn on the cable into a socket 220 V.

14 26 Electrolux Warm floors Warm floors Electrolux 27 Antifrost Mat Outdoor series Article Square laying M 2 Power, WT Length Mata, M Resistance, OM -5 / + 10% EaOm, 3 EaOm, 7 EaOm, 8 EaOm, 3 EaOm, 3 EaOm , 9 EAOAM, 0 EAOAM, 2 EAOAM, 9 EAOAM, 1 EAOAM, 7 EAOAM, 4 EAOAM, 4 EAOAM, 5 EAOAM, 8 EAOAM, 1 ANTIFROST MAT OUTDOOR series Single-core textile matters for external use, is designed to solve anti-icing tasks Sea sites, driveways and tracks. The product characterizes high power, 100% hermetic coupling of the heating and power cable, double enhanced layer of external insulation. The capacity of 300 W / m 2 will allow you to move on ice-free inclined road, reduce the risk of injury. The heating mat installed in open areas will allow them to be fully. Electric cable heating of external sites The most economical way to remove snow and ice. Thin coupling braided copper screen 300 w / m 2 Power 300 W / m 2 Insulation from fluoroplast Specific power Mata 300 W / m 2 at 220V Powerful cable with double-layer external insulation Slim "Invisible" coupling, 100% Water resistant Crab laying space Styling under the asphalt two-way connection cable type Single-core power Mata 300 W / m 2 Power cable 30 W / m voltage 220 V, ~ 50 Hz Mat width 0.5 m Mat thickness 5.6 mm Cable laying pitch 10 cm Length of connecting cable 2x4 m Three layers of isolation warranty 20 years Aramid superfrek aramid lived anti-icing systems increased tensile strength

15 Warm floors Electrolux Electrolux Warm floors DRY STEP MAT OUTDOOR Series Square Mata M 2 Power, W Length Mata, M Resistance, Om -5 / + 10% EDSMO, 2 1.4 EDSMO, 5 1.6 EDSMO, 8 1.6 EDSMO, 1 2.8 EDSMO, 4 2.2 EDSMO, 7 2.8 EDSMO, 3 3.9 EDSMO, 6 3.8 Article EDSMO DRY STEP MAT OUTDOOR series Two-tier heating mat Special width for external applications, designed specifically to ensure The safety of movement on stairs and the porch in the cold season. The use of the heating mat will help to abandon the mechanical methods for cleaning the coating of ice or snow. The mat has a width of 25 cm, stacked directly on the steps and does not allow them to be covered with ice and snow. Laying in a shooting simple installation Fast heating time Anti-icing systems Two heating conductors Braided copper screen Cable type Two-tier Power Mata 300 W / m2 Cable power 30 W / m Voltage 220V, ~ 50 Hz Mat width 0.25 m Mat thickness 5.6 mm Pitch Cable Styling 10 CM Length Power Cable 4m Mat Width 0.25 m Stacks on Steps Specific Power 300 W / m2 at 220V Powerful Two-Piece Black Cable Simple and Fast Stacks On Steps Place Couplings Marked in Red Unilateral ARAMID 300 W / M 2 Super Employed Aramid Lived Power 300 W / m2 Warranty 20 years Increased tensile strength Thin coupling Insulation from fluoroplastic Innovative textile base

16 30 ELECTROLUX Warm floors Warm floors Electrolux 31 Antifrost Cable Outdoor Series Article Power, WT Length Cable, M Resistance, OM -5 / + 10% EACO, 3 EACO, 9 EACO, 7 EACO, 3 EACO, 4 EACO, 2 EACO, 8 EACO, 6 EACO, 7 EACO, 2 EACO, 6 EACO, 4 EACO, 8 EACO, 3 ARAMID SUPERPRATING ARADE HOUSE Polyolefin Ultraviolet protection Series Antifrost Cable Outdoor Powerful twin cable for anti-icing systems of adjacent sites and soil, roofs and drains. It has six layers of insulation, including two braids: shielding and reinforcing. External insulation is protected from ultraviolet and other atmospheric influences. The series is designed specifically for countries with a cold climate. Prevents the formation of icicles and forehead along the edge of the roof, in the drains and ensures unobstructed outflow of melt water from the roof in the winter season. It is the ideal solution to the problems of the anti-change of roofs and drainage. Two heating conductors double braided copper screen 30 W / M Power 30 W / m Increased tensile strength Universal two-core cable for anti-icing systems Roofs, drainage and seafronts Pulp power 30 W / m at 220 V six layers of isolation, including two braids : shielding and reinforcing outer insulation of a polyolefin cable resistant to ultraviolet one-sided attachment cable type two-in-room cable power 30 W / m voltage 220V, ~ 50 Hz cable diameter 7mm length connecting cable 4 m warranty 20 years insulation from fluoroplast anti-icing systems

17 Warm floors Electrolux Electrolux Warm floors Series Frost Guard Pipe Cable Series Frost Guard Pipe Cable Cable for protection against freezing pipes located outside the premises or inside unheated premises. Equipped with a standard fork for connecting to the network 220 V. Cable insulation provides protection against ultraviolet and aggressive conditions of the external environment. Unique Contrarity Power, WT Length Cable, M Resistance, OM -5 / + 10% EFGPC, 5 EFGPC, 8 EFGPC, 5 EFGPC, 9 EFGPC, 7 EFGPC, 3 EFGPC, 4 EFGPC, 9 EFGPC, 2 EFGPC, 4 EFGPC, 6 EFGPC, 7 EFGPC, 0 EFGPC, 1 EFGPC, 2 The structure of the cable includes a bimetallic sensor that constantly measures the temperature of the pipe and adjusts the power in the temperature range from + 3 ° C to +15 0 ° C. The work of the sensor is based on the laws of physics and has a mechanical, not an electronic structure, which guarantees its durable trouble-free operation. Polyolefin Ravenly power 17 W / m at 220 V Bimetallic temperature sensor automatically changes the power of the cable in the range from +3 s to +15 with outer insulation from polyolefin resistant to ultraviolet and other atmospheric influences Standard power plug from the network does not require the installation of the thermostat Pipe One-Sided Connection Cable Type Two-Roise Cable Power 17W / M Voltage 220V, ~ 50 Hz Cable Diameter 7x5mm Cable Cable Length 3 m Power 17 W / M Warranty 20 Years Superfoot Aramid Lived Automatic Maintain Temperature Bimetallic Sensor Insulation Fluoroplast Connecting to Network 220 V Two Gray Explorer Heating Pipes Thin Coupling Braided Copper Screen Increased Breaking Strength Minimum Radius Bi-Metal Sensor Defense Protection ARAMID

18 34 Electrolux Warm floors Warm floors Electrolux 35 Temperature regulators To control warm floors, we thought that the control of warm floors should be as simple as possible, and the cost of electricity is minimal. Ease of control. The model range in order to make control of warm floors with as easy and convenient, Electrolux provided the possibility of installing highly reliable thermostators. All ELECTROLUX thermostators have an intuitive interface. Anyone can easily manage warm floors without prior training and additional training: just just familiarize themselves with the instructions. The product line presented 3 series of thermostat: Basis electronic with mechanical control of floor heating temperature, Avantgarde is a programmable with LCD display and touch - with a touchscreen display and programming opportunity for a whole week. Electrolux thermostators practically do not occupy places and harmoniously fit into any design solutions, becoming an integral part of the interior. Touch is equipped with a child protection function. Functions and modes The Basic Series is equipped with a gender temperature sensor on a wire, and Avantgarde is also a sensor for air temperature for wooden flooring and heating systems. In addition, the thermostat allows you to install the corridor of the maximum and minimum floor temperatures. Also, the Avantgarde model has the ability to set the temperature range for each hour during the day. The Touch Series allows you to establish a program for weekdays, weekends, as well as every day separately.

19 Warm floors Electrolux Electrolux Warm floors Thermotronic Basic Series Thermotronic Avantgarde series Voltage working in, ~ 50Hz Maximum load current 16A Maximum load capacity 3.6 kW Temperature setting up to 10C Power consumption 5 W Operating temperature range from + 50cs to + 400c Dimensions , mm: 86x86x50 Programming Temperature Mode per hour During the day Intuitive interface Electricity Savings Section temperature sensor Included Built-in air temperature sensor Replaceable panels of various colors LCD display with illuminated Ergonomic design Ability to install a corridor temperature Installation hidden in mounting box 3 years Voltage Working in, ~ 50Hz Maximum load current 16A Maximum load capacity 3.6 kW Setting temperature up to 0.50s Power consumption 2 W range Operating temperatures from + 50c to + 500С Sizes, mm: 90x86x46 Floor temperature sensor bundled On color color indication in operation ergonomic design Mechanical control The possibility of installing the temperature corridor hidden installation in the mounting box Warranty 3 years (3600 W) Switching current 16 A Ergonomic design Replaceable colored panels (3600 W) 25. Temperature sensor bundled temperature adjustment 1 With automatic temperature maintenance Installation of the Corridor temperature IP 20 Switched current 16 A Save electricity programming During the day Setting the temperature with an accuracy of 0.5 0s with a floor and air sensor Warranty 3 years Intuitive interface Degree of protection Automatic maintenance of temperature Warranty 3 years +0 , 5 OC Installation of the Corridor Temperature LCD screen with illumination IP 20 Replaceable color panels Degree of protection

20 Warm floors Electrolux Electrolux Warm floors series Thermotronic touch Programming time periods for weekdays and weekends Intuitive interface Saving electricity Floor temperature sensor included Built-in air temperature sensor Replaceable panels of various colors LCD display with backlit Touch control Lock control panel from children Ability to install a corridor Tempets Hidden Installation in the Mounting Box Warranty 3 years Voltage Working B, ~ 50Hz Maximum load capacity 3.6 kW Temperature setting up to 0.50c Power consumption 2 W Operating temperature range from + 50c to + 900C Sizes, mm: 90x86x43 (3600 W) 25. Switched current 16 A Save electricity programming on days of week Set temperature up to 0.5 0s with floor and air sensor Replaceable color panels Protection against children Intuitive interface Automatic temperature maintenance +0.5 OC 25. Warranty 3 years Touchscreen IP 20 C Warm protection

21 ELECTROLUX IS A REGISTERED TRADEMARK USED UNDER LICENSE FROM AB ELECTROLUX (PUBL), S: T Gȯ. Ransgatan, 143, SE, stockholm, Sweden thoughtful design innovations you remember when the last time, opening a gift, you exclaimed: "Oh! How did you know? This is exactly what I wanted! " It is such emotions developers and designers Electrolux seek to call in each who chooses and uses our products. We dedicate our time, knowledge and reflections to predict your desires and create such a technique in which you really need and about which you dream. Showing a special care for our customers, we largely use an intuitive approach to innovation. Our main value is not in the name of the product, but the product in the name of its users. Guided by the principles of thoughtful design, we create a technique that is easy and pleasant to use to give our customers the opportunity to enjoy the main luxury of the 21st century with peace of mind. Our goal is to bring this spiritual peace in everyday life as much as possible people. Therefore, when we say we think about you, you know what we mean by exactly you. Electrolux. Thinking about you. Learn more about our ideas on and ECTP version 2013/1

Electrolux Warm floors 2012 Product Study Warm floors. The basics of thermophysics as practice shows, no heating system provides such uniform heating as "warm floor". Spheres

Warm floors and anti-stake systems Catalog 2014 Contents Contents Warm floors Electrolux Catalog 2014 Heating mats Multi Size Mat Series 8 Easy Fix Mat 12 8 Heating Mats Heating Mats

Warm floors and anti-stake systems Catalog 2014 Contents Contents Warm floors Electrolux Catalog 2014 Heating mats Multi Size Mat Series 8 Easy Fix Mat 12 8 Heating mats series

Warm floors and anti-stake systems Electrolux 2016 Contents Contents Warm floors Electrolux Catalog 2016 Heating mats Multi Size Mat Series 8 Easy Fix Mat Series 12 ECO MAT 16 8 Series Heating

Warm floors and systems of anti-Clare 2017 24 Heating Film 30 Temperature regulators Coroloring Warm floors Electrolux Catalog 2017 Heating mats Multi Size Mat Series Easy Fix Mat 12 series

Warm floors and anti-stake systems 2019 Contents Assortment Warm floors Electrolux Catalog 2019 Thermostators Thermotronic SMARTRONIC Series 14 Thermotronic Basic Series 16 Thermotronic Avantgarde series

Veria Veria Quickmat Heating Cable Systems, Single Cable Veria Quickmat, Double Cable Veria Flexicable 20 Veria Control B45 and T45 Page 2 Heated Floor Cable Provides Perfect

Electric warm floor SOLELEC comfortable, warm, safe www.rehau.ru Construction Automotive industry electric heated floor Rehau System description for some areas of the modern apartment

"Warm floors" Raychem Warm cables for comfortable heating of floors with different coatings www.pentairthermal.ru Warm floors Raychem Individual solutions for heating floors with any coating Many

The advantages of the warm floor "National Comfort" High quality Warm floors "National Comfort" are produced in Russia "Special Systems and Technologies" on the largest plant in Europe. 100%

Electric heating of floors Version 2.0 / December 2011 Event Program 1) Acquaintance. About enterprise TTS 2) Why do not need heated floors 3) comfort room 4) comparison of various outdoor systems

The warm floor Hemstedt is the first to solve the problem of compounds of heating and electrical conductors for heating cable. Unique Industrial HEM-System Connection Technology eliminates

Ceilhit Products Heating Cables Ceilhit PV Types, PSV These Single Cables. The differences between them are determined by the presence of an additional protective shell or metal braid used

Price list on construction electrical heating products December 23, 2014 Warm floor systems - Heating mats IQ Floor Mat IQ Floor Mat - 150 W / m2 (without thermostats) Size sh \\ d, m m 2 Power section, W iq

Heating floors in rooms Heating mats for all heating cables Thermal regulators Electric heating of floors is the most useful heating system for humans. Vertical

Electric Warm floor, Features Selection and Mount General Information Warm floor System, allowing to heat an apartment, Country house, Public building due to infrared radiation

T with and l with th panian 2019 and legs warm, and finance in order iq floor mat simple and convenient solution intended for installation directly in a layer of tile glue (up to 10 mm height) for any

STN is aimed at solving applied tasks in the heating area using a ribbon from an amorphous alloy as a heating element. Exploiting the heating systems of our company, you get,

0 Heating of the floor Comfortable and uniform heat Heating of the floor is suitable for almost all types of floor coverings and is an excellent solution for all types of buildings. Heating floor is hidden from eyes and gives

Under Decorative Coatings: Laminate Parquet Board Carpet Linoleum Assortment Film Warm Paul Slim Heat Warm floor Slim Heat is designed to create a comfortable or main heating of the room

Warm floor Introduction Content Introduction ... 2 Products - Series TL ... 3 - MB Series ... 4 Heatus Cable Systems Designed for Heating Floors from Stone and Tiles in Bathrooms, Kitchens, Hosts and Others

Infrared or film warm floor is a modern type of electric heating floor, which is manufactured using the most advanced technologies. Its installation takes a little time and does not require

Build on Uponor With more comfort in any room with Uponor Comfort E Uponor Comfort E our new high-speed heating solution that improves comfort in the most privileged parts

Daewoo Enertec Retail Price, January 2019 Catalog Boilers, XL Pipe Catalog of the Catalog of the Catalog of the Catalog of the Catalog of the Catalog of the Catalog of the Catalog of the Cell Pipe: Power: Power: 40 W / Po. m Length systems from

E I Simple Heat Series (12W) with a built-in thermostat protection against freezing household pipelines NEW! Installation and Operating Instructions Section Heating Cable FreeZstop Simple Heat Manufacturer:

Heating mats Devimat DSVF Passport Products are certified by the Russian State Standard in the GOST P certification system and has the official conclusion of CGSEN on hygienic assessment. Contents of "Passport"

Installation and operation instructions Tropix floor heating system is important! For thermostat produced by OO "CST", the temperature sensor is connected to the terminals 1 and 2; supply voltage (variable

Warm floors Lavita comfort and comfort your home! www.rosizol.com; www.stroydostavka.com Lavita heating cables are high-quality products that are designed and manufactured in Y. Korea using

Heat from below. How much is the warm floor today you can not wait for mercies from nature and utilities due to the modern and reliable warm floor. This system is installed in the apartment, cottage, on

Water heaters Gas flowing water heaters We thought about people who were not used to limit themselves, and in water supply issues rely on reliable and modern solutions, such as

Electric warm floors The type of modern heating, in which electricity is used to generate heat. It does not require the installation of pipes and circulation on them the coolant, so it is not afraid of low temperatures

Room thermostat Veria Control Et45 Veria is a European manufacturer of electrical heating systems. The company was founded in 2006 in Denmark and works today in 16 countries.

General information HEAT-PRO Pro Range minikit heating cable kits 3 mm are the most flexible and economical floor heating solution. PRORANGE MINIKIT 3 mm sets are designed for use in small

Heating Heating Cables and Mats, Temperature Management and Accessories Warm floor Ensto - this is: Comfort Safety Environmentally friendly Finnish quality Ensto is suitable for your home: for the main

ÍûÉ éééé õõõõõõõõõõõßßßßßßßßßßßééééééééééééé ëëЕëëëëЕëëëëëëëëëëëëëëëëëëëëëëИ PIPE Power: 40 W / POP. M Length of systems from 7 m to 84 m comes in the finished form, in the bays Installation in the screed 4 5 cm tile / linoleum

Protection against the freezing of household pipelines Instructions for installation and operation of the CRC.00047.01 them Section is heating cable FreeZStop Simple HEAT economical and safe solution for your comfort

Thin heating mats 3 self-adhesive heating mat 3 mm thick for laying under ceramic tiles or natural stone. What mat do I need? -90 for well insulated floors. When using the system

Floor heating Comfortable and uniform heat Heating floor is suitable for almost all types of flooring and is an excellent solution for all types of buildings. Heating floor is hidden from eyes and gives freedom

Warm floors electrotricals 1. What is warm floors? Warm floor heating system, providing heated floors indoors. This is a modern and convenient way to heating residential premises or at home in any

Recently, the warm floor is becoming increasingly popular. It serves as the main heating of residential buildings and additional comfortable heating of the floor. Since warm air rises up, then when

Instructions for installation and operation of the floor heating system MINI is important! For thermostat produced by OO "CST", the temperature sensor is connected to the terminals 1 and 2; supply voltage (variable

Cable heating systems Cable heating systems Lavita floating systems Reliable and practical solution to the problem of heating your apartment, office, cottage, garage. Lavita warm floor system is very easy to operate,

Deviflex DTCE Heating Cable Passport Products Certified by the State Standard of Russia in the GOST R Certification System and has the official conclusion of CGSEN on hygienic assessment. Contents of "Passport"

Devimat DeviRail Devireg Devimat Devireg on cable products, Devimat is a 20-year warranty, Devireg Touch thermostators are 5 years old, for thermostat 2 years. (bathrooms, toileties, refrigeration

DEVI Products Deviflex Heating Cable Diviflex Two-Tie Cables: DTIP-10 (10 W / m) DTIP-18 (18 W / m) DTIE-10 (10 W / m) DTIE-17 (17 W / m) length from 2 to 200 m P - XLPE stitched polyethylene (internal

DEVIFLEX DTIV-9 heating cable Passport Products are certified by the State Standard of Russia in the GOST R certification system and has the official conclusion of CGSEN on hygienic assessment. Contents of "Passport"

Ñ \u200b\u200bý ý ýëîßßßßßÃîßÃî ß à àààààèèèèèèèèèèèèèââââââßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßëëßßßß Unique electro-water warm floor XL Pipe is a pipe with a diameter of 20 mm

Increased energy saving with the help of electric heated glass Thermo Glass is a glass with an electric heating created by innovative patented technology. Principle of operation: at low-emission

DEVIMAT DTIR heating mats Passport Products are certified by the State Standard of Russia in the GOST R Certification System and has the official conclusion of CGSEN on hygienic assessment. Contents of "Passport"

Www.teplokomfort.com is the official exclusive Diller of Dayol in Ukraine. DAYOL company since 2007. Engaged in the production of infrared film floors. All these years, the company accumulated

Deviflex DTIP-10 Heating Cable Passport Products Certified by the Russian State Standard in the GOST P certification system and has the official conclusion of CGSEN on hygienic assessment. Contents of "Passport"

Warm floors Chuvashteplocabel. Map of distribution. More than 30 distributors in the Russian Federation (Cheboksary, Moscow, Vladivostok, Volgograd, Voronezh, Ekaterinburg, Izhevsk, Yoshkar- Ola, Kazan,

Energy Saving Paul Heating System T2Reflecta 2 Energy Saving Paul Heating System T2Reflecta System Components Self-Regulatable Heating Cable T2RED. T2Reflecta plates: installation grooves

Self-regulating heating cable self-regulating cable Type MLTV Design of heating cable Description Self-regulating heating cable Type MLTV Used to protect against freezing

Deviflex DTIE-10 Heating Cable Passport Products Certified by the State Standard of Russia in the GOST P certification system and has the official conclusion of CGSEN on hygienic assessment. Contents of "Passport"

Heating Systems 26 Mat Heating "Comfort" Thermostat MTT-1 Temperature regulator ETT-1 p. 774 pp. 777 p. 777 - Hit Sales - Novelty - Made in Russia 773 Mat Heating "Comfort" EKF Proxima Description

Protect the house from snow and sleep ready-made sets to protect against sleep, icicles and accumulation of snow masses. Freezstop roof for roofing and drainage systems. Freezstop Patio for steps and open areas.

RU Installation Installation Instruction Instructions. Devireg 530, 531 Devireg and 532 TM 530, 531 and 532 TM 530, 531 and 532 Article: 08095837 Version: 01.01 1 2 Exturbation 1. Description and function Description and

IQwa Inc., Canada 20 W \\ m Economic heat! IQ Floor Cable Heating Cable Heating Cable Installation and Operating Instructions IQWA Inc., Canada We are glad that you made the right choice in favor of IQWA. In our

From stainless steel www.energyrus.ru Benefits An independent installation is possible, no need to cause plumbing and block water. Polished stainless steel - will not hang out and does not fit. Leaks

Installation and operation instructions Standart floor heating system is important! When connecting sections, pay attention to the insulation colors lived installation wires, where the yellow-green ground ground or

EL-RAIL, EL-POINT Solutions for heating rail rails and arrows System for electric heating in areas with long winter periods Any surface located outdoors is covered

IQwatt Inc., Canada 20 W \\ m Economic heat! IQ Floor Cable Heating Cable Heating Cable Installation and Operating Instructions IQwatt Inc., Canada We are glad that you made the right choice in favor of IQWatt.

Electrical heating systems from the world's known worldwide manufacturer on the basis of cable heating products and special heating mats are mainly reassigned for comfortable heating of rooms by heating the floor surface, under which the heating system itself is actually mounted.

Note that the premises in which the effective electric heating of floors can be organized not only by residential, but can also be used for effective and energy efficient heating of public and office space.
Electrolux Warm floor Instructions for the installation of which will be given below, does not require mandatory installation into a sandy-concrete screed, sufficient laying of cable products or a heating mat into a pre-prepared tile adhesive solution.

The advantages of a warm floor in front of radiator heating

The manufacturer took care of the compactness of its products and when laying the heating system for heating the floor surface, the level of the latter rises to minimal indicators.

Starting Stage: Planning

At the initial stage, implying the organization of such a heating system for premises, as Electrolux, the warm floor of which comes complete with this equipment, it is necessary to plan future installation work.

The algorithm for such planning is pretty simple to begin with:

Conduct auditelectric wiring indoors in which this heating system will be installed for high-quality and uninterrupted connection. For this, the capacity indicators of all devices that can be connected during the operation of the heating system to the electrical network are summarized. It is also necessary to take into account various devices that can also be connected, but are not mandatory to constantly connect.
Warm floors Electrolux installation of which should be made by a specialist, and having a power of more than 2 kW is recommended to be connected by means of a separate machine to a specially removed wiring. In addition, the connection is desirable to produce through UZO (nominal response indicators not higher than 30 mA).
Before layingthe heating mat or cable products should be measured by the resistance of each of the elements of the system (data is recorded in the warranty card). If everything is fine, then the recorded parameters must match the factory (indicated by the manufacturer in the instruction).
The next step is most important - this is the compilation of the laying scheme of the heating electrical system for floor heating. Note that the distance between the system and other heating devices, walls or communication uzami should be at least 30-50 cm.

Laying the heating system: features

Before laying such a product as warm floors, the installation of which is fairly simple, nevertheless to trust it with specialists, you should pre-prepare the surface: remove pointed items, extra buildings, as well as unevenness to provide a smooth base for laying a cable or a heating mat.
Further, the location of mats or heating cable products is determined taking into account the features of geometry and premises, as well as furniture in it.
You should also not forget that where the thermal sensor and the thermostat will be placed.
Further, warm floors Electrolux installation implies the placement of direct heating elements - after they are placed, make sure that the temperature sensor wires and power cables do not come into contact with each other.

It is important to take into account

Pay special attention to the fact that it is strictly prohibiteduse various kinds of extension cords or independently increasing the wires, these actions significantly reduce the safety of the system operation and can cause an emergency.
The laying of heating products should be made by a smooth side on the base, after which the fitting is carried out along the pre-made scheme.
If it is necessary to obtain the desired form of the mat producing the product only in those places of the heating structure where the frame fabric is present.
Directly heating cable cut it is impossibleSince this will violate the integrity of the heating system.
The distance between the heating elements should be the same, but not less than 5 cm.
Did not follow the installation of the heating electrical system for heating floors to use the compound of the heating elements of the mustache.

The correct installation of the system design guarantees a long and safe life of its operation.

As a rule, in the winter season, indoors go to slippers or in wool socks. This trend is also preserved in those rooms where the temperature is above 20 degrees, as modern radiators do not provide full-fledged room heating. But progress does not stand still and today, using a warm floor of the electrolyc, you can forever forget about the cool flooring in your room.

Warm floor electrollingss a unique basis of gloss

Warm floors from ELECTROLUX have not been known not only throughout the country, but also abroad. Such an incredible success was possible, primarily due to innovative technological developments, allowing to produce products, which ensure the maximum level of comfort in the room. But let's in order ...

The heating cord of the warm floor consists of heavy-duty veins, which includes aramid threads. As a rule, aramid is a greater extent high-strength fiber from synthetics, but if you hold the parallel between it and steel, the strength of aramid will be five times higher. That is why the use of this substance several times increases the stability of the cord to ruptures or stretching.

Important! The veins are sized with fluoroplast, which provides them with high wear resistance and electrical strength.

In addition, the distinctive feature of the heating mats is that their base is impregnated with a special adhesive composition, which not only creates ideal conditions for adhesion, but also prevents bubbles.

Attention! The structure of the mat is completely homogeneous.

Benefits

Warm floor Electric Electro Electrolux it has a number of advantages, from the mains of which are distinguished:

Uniform and rapid heating of all square in the room.
Independent fixation.
Durability.
Resistance to heavy physical exertion.
Wear resistance.

Installation

As practice shows, one of the most accessible ways to make its flooring is warm - the use of heating mats with a base of thin cords, which is fixed on self-adhesive basis. In addition, it should be borne in mind that the installation of them is not only very simple (since the bay of the tie from concrete is not required), but also does not require special skills or knowledge. All that is needed is to deploy and fix the mat. Make sure that the cable resistance is present and connect the thermostat for the heated floor of the electrolum. Next, it remains only to put this coating and enjoy the comfortable layer of flooring.

Application

As practice shows, you can not only use the warm floor of the electrolyks under the tile, but also under the other cold coatings. In addition, he has proven well and in combination with laminate and parquet. But in this case, it is necessary to remember the observance of elementary safety rules.