How to glue wallpaper on the ceiling. How to glue wallpaper on the ceiling with your own hands, video

Interestingly, many people are wondering how to glue wallpaper on the ceiling yourself? It seems to me enough in order to write an article about this. The fact is that a person did not possess a fitful character, such a job together with a partner still takes out of equilibrium - Rugan begins, scandals, as a result of which the work is not moving on a yot. In this article on the site's website, we will try to reveal all the secrets of masters who know how to crack the ceiling of any size alone. We will examine this technology in detail, sobering it to the smallest details.

What wallpaper can be punished on the ceiling alone and what is necessary for this

To begin with, it is necessary to deal with those properties that the wallpaper must have wallpaper for their maximum and comfortable shoes.

Firstly, the wallpaper should easily slide on the surface of the ceiling - without it, it will not work well with each other to docile well with each other.
Secondly, it should be convenient to hold the wallpaper under the ceiling yourself. Agree, unwrapped and smeared with gloss band wallpapers is quite difficult to keep. And what in this case is about working with her? It is much more convenient to hold wallpaper twisted into the roll - and such as you understand, we will not smear glue.
Thirdly, in this situation, the wallpaper is simply obliged to almost instantly stick to the surface of the ceiling - this step should be paid to the minimum of time. We need such wallpapers that would stick and subsequently disappeared even in a non-collected state.

How to glue wallpaper on the ceiling do it yourself photo

For these three requirements, it is possible that it is possible that the flieslinic wallpaper can be hit - they greatly slide almost along any surface, they do not need to be smeared with glue (only wall is covered with glue) and they immediately stick with the ceiling immediately and do not disappear. This is exactly what is needed in this situation.

With the question of which wallpaper glued on the ceiling, we figured out, it remained to clarify the situation with additional requirements, in which the independent sticking of wallpapers on the ceiling will be easily and easy.

An important role in this issue is played by a properly prepared workplace, which allows you to freely move under the ceiling throughout the entire clovel. For this you have to host racks - the challenge is that you can simply go and do not look at your feet and even more so not to jump from one table to another. I think everything is clear here, and everyone will solve this question in its own way - one will put two or even three tables nearby, others will collect construction scaffolding. In general, as they say, dare and do not forget that the height of these racks must match your growth - or rather, they should be so raised from the floor so that you can work comfortably.

What wallpaper glued on the ceiling

Ceiling pasting with your own hands: technology

Despite the seeming complexity, pasting the ceiling by fliesline wallpaper actually looks quite simple and at the same time has a fairly large number of subtleties and nuances. And the first of them is the glue itself. We'll have to forget about all recipes for its preparation, which are written in a pack and cook it differently.

The glue for fliesline wallpaper should be sufficiently thick - if proceeding from the proportions, then the full packaging will have to dissolve in the twelve-flow bucket.

We are talking about the standard packaging of Kelid's glue - it is that it is suitable in such a situation. Although Methilana is also pretty good - I can't say anything about other glues, as I work with these. In general, at the end of cooking glue should look like a thick sour cream. Here is such a glue and apply to the ceiling with a roller and do not forget to grind the surface, otherwise the glue is quickly absorbed and in the process of work will have to be distracted and smeared the ceiling again.

Ceiling pastry wallpaper with your own hands photo

With the first wallpapers, there should be no problem - you don't need to dock with anything with anything, and if you are experiencing about the junction of wallpapers with baguetas, then just make a small backstage and after full gluing the wallpaper cannon cut it under the ruler. It is very important not to curb the first strip - if it goes to the side somewhere, then the online wallpaper will not be able to glue. So that it does not occur, it is necessary to specify the direction of sticking using a lace.

The gluing technology itself is quite simple - we take a roll and, without unwinding it, apply one of its end to the smeared ceiling, and then, slowly spinning it with one hand, the second smooth the spatula. When you get to the end, the roll can be cut off first with a slight margin, and then clearly under the ruler or metal spatula.

How to cut a roll of wallpaper photo

Almost the same way as the process of sticking all the subsequent wallpaper cloths. The difference lies only in working with the joint of the canvases - they are not only necessary to connect qualitatively among themselves, but also to rotain so that they never separated and did not dug.

In the process of sticking, the canvases are not necessary to fully docile - if somewhere there is a gap within 1 mm, it can always be eliminated after the stickers of the entire canvase. Fliseline wallpaper allow you to carry out such an operation - they greatly slide over the surface and they are enough just to pull to each other with a plastic spatula. To do this, you just need to drive out the remnants of the glue towards the seam - do not cease, the result can be deplorable. If you get even a small backstage, then to eliminate the wallpaper, wallpaper will have to tear.

How to fir the wallpaper joints on the ceiling photo

In order for the edges of the wallpaper did not dug over time, the joke must be pretty much a special plastic roller - he reminds something with a tread in miniature. It is this protector and helps to highlight the place of compound of individual cavities.

Punning wallpaper on the ceiling together photo

I do not know how much this technology cladding the ceiling by wallpaper will seem difficult to you, they solve themselves here. I can only say one thing if you wondered on the ceiling, then nothing is better than this method you will not find. To glue other wallpapers, and even with a partner, much stuck and longer. The fact is that for plating wallpapers, complete coherence and mutual understanding is needed.

Wallpaper sticking in the absence of at least some experience is very complex. Even experienced masters in front of ceiling works are preparing for overcoming some difficulties. Therefore, those who decided to engage in independent design of the premises should be aware of the main stages and nuances of such work. This will help avoid mistakes and make a high-quality finish.

Preparatory process

A professional can stick on the ceiling wallpaper independently, folding them with "accordion", but the novice expert is better to find an assistant. It will support the hanging end of the paper canvase and evaluate the quality of work. It is much easier to facilitate the task.
If the ceilings are high, it is complicated by the need for a sustainable bunk pedestal device, which will be easily climbing. For premises with low, there will be a sufficiently convenient table or high tobabere. It is necessary to prepare the platform on which it will be diluted and coiled with glue wallpaper. The optimal solution will be released along the wall and clean the floor thoroughly.

The surface of the ceiling should be cleaned of lime or paint, align, cracks to close with a putty composition. Before the elimination of irregularities and flaws, the entire processed area should be covered with a brine composition of deep penetration. Before starting work, you will need to close the doors and windows tightly, turn off the electricity.

Stages of work on pasting ceiling with wallpaper

1. A bruster, roller, clean rag, container with glue is prepared.
2. Along the walls spread the roll and cut it on the canvas the same length after matching the drawing.
3. On the middle of the first canvas, glue and neat movements are distributed to the edges. The adhesive composition should not get on the front of the wallpaper.
4. The canvas are inhappings so that the sides are in contact.
5. Depending on the structure of the selected wallpaper, it will be needed at different times to ensure that the paper is soaked. Usually grabs 1 minute.
6. Next, you need to get to the pedestal and ask for an assistant to file one of the edges of the canvas. At this time, its second side is maintained below.
7. Having distributed wallpaper in the desired direction along the wall, it is necessary to roll out of the roller, squeezing the air and achieving a flat smooth surface.
8. After part of the web is glued, the pedestal moves and the process continues.
9. The second segment of the wallpaper is pasted in the same way.

Professionals are recommended to smear glue and ceiling so that work moves faster and was better. Much depends on the type of paper chosen: if it is too dense, then she needs to give more time for impregnation. Maintain such web should be more neat, as the weight of the wet canvas is significant, and it can break.

When it comes to finishing the ceiling surface, then people in most cases consider only three options: the installation of the stretch ceiling, the installation of the suspension and painting. It would seem that it is not particularly necessary to choose, however, there is a fourth option that has been applied for dozens of years, but today for some reason it goes into the past. We are talking about finishing with wallpaper. The ceiling wallpaper was not always glued, mainly because it is difficult to glue them and uncomfortable. This article is written in order for even the newcomer to understand how to shove wallpaper on the ceiling.

It should be started with that such a finish option has always been original, since gave wide design opportunities. Wallpapers allow you to create unique interiors who do not find in other houses or apartments.

As for the other advantages of this method, they can be attributed to them:

the lack of need for frequent painting of the ceiling, if he is fading with time;
no need for considerable cash costs related to the arrangement of tension / suspended structures.

In other words, wallpapers are the best option at several criteria. However, it should be remembered that the choice of material needs to be approached with full responsibility (this is especially relevant in relation to premises with high humidity).

Now consider the blending process itself. This procedure, as already noted above, is extremely inconvenient: it is not easy to glue wallpaper on the walls, and then all works are performed above the head.

What rooms are pasted by wallpaper?

It is not suitable for every room. Relief colored ceilings, as you know, visually reduce the room, so this method is suitable for large rooms - let's say, for the living room, where you can not only experiment using various textures, but also hide the shortcomings of the finish. The fact is that the latter in large rooms are less noticeable than in small.

Even at the ceiling, covered by wallpaper, there is a large set of visual effects. With it, for example, you can make a room more comfortable and divide it into several zones. It is quite obvious that the possibility of distinguishing the premises is especially important in one-room apartments, where one room serves as a computer and a living room, and a bedroom. Finally, the porosity of the wallpaper also gives additional noise insulation.

Prices for photo wallpaper

photo wallpaper

The first stage. Determine with the type of wallpaper

Initially, it is necessary to familiarize yourself with the features of some types of wallpaper, and also find out which option is more suitable for the ceiling finish.

Paper. The most common variety of material characterized by the cheapness. A good choice in case of cosmetic repair.
Liquid. Who does not know, such wallpapers are a special liquid mixture, giving after applying a seamless and perfectly smooth surface.
Vinyl. Very popular today, differ in durability, strength and moisture resistance.
Fliselinovye. Such wallpapers are especially durable, elastic, abrasion racks.
Textile. Consist of two layers - paper (or phliselin) bases and textile canvases.

We reviewed not all types of wallpapers present at the current market, and this is nothing. Instead, let's go back to the main topic, namely, the ceiling pasting with their own hands.

GOST 30834-2002. Wallpaper. Definitions and graphic characters. File for download.

Stage second. We prepare everything you need

As for the wallpaper themselves, there are no restrictions on their choice - you can apply any of the above options. For example, the starry sky is a very original method of designing the surface of the ceiling.

On a note! Separate attention deserves a sticking of wallpaper under painting. Modern models of the material can be painted up to 15 times, and therefore, if the color is tired, it is not necessary to remove the previous finish at all - instead you can simply repaint it.

If the ceiling in the room is low, then it is preferable to use the wallpaper of light colors, and necessarily with small and inappropriate patterns. So the ceiling is visually raised, and the light wallpaper themselves will fit almost for any interior. In order to reduce the height of the ceiling, you need, on the contrary, use dark tones. However, this is a matter of taste, so no one will hurt to use for sticking the option that you personally like it.

Prices for flieslinic wallpaper

fliselinova wallpaper

Still in the work there will be such tools:

stepladder (or durable table, goats);
brushes;
bucket;
rags;
construction mixer (as a last resort, you can use a conventional wooden stick) to stir glue;
pencil;
roulette;
roller (handle should be long, and the length of the pile is medium);
special bathtub for roller (thanks to her glue will be distributed evenly).

On a note! The bands must be laid parallel to the window. With the natural light emanating from the window, the joints will be less noticeable. For this reason, the trimming of wallpaper should be carried out with the longitudinal size of the room.

And also: to dress better together. One will glue the wallpaper, and the other is to hold the edges of the bands and ensure that the laying is performed correctly. Although this can be done independently (by folding the canvas in the "harmonic"), but only with great experience.

Stage Third. Prepare the ceiling

One of the main advantages of sticking with wallpaper is that it is not necessary to remove the old coating from the ceiling. But if there is a whitewash, it is desirable to remove it, after which the surface is twice. If before that the ceiling was already the wallpaper, they also need to tear.

If the working surface is uneven or has significant slopes, it must be aligned (in particularly serious cases, drywall is used). However, this, again, depends on the budget, as well as from what kind of repair you will do.

Prices for spacure

shpaklevka

If the sticking of wallpapers will be made on a sharp surface, then before starting work, it must be processed accordingly. You can use for these purposes acrylic primer, applying it to the ceiling with a conventional brush.

When the primer layer is driving off (and this will happen quite quickly), you can start directly shook wallpaper. We also note that the grain of the ceiling is an optional procedure, but the wallpaper on the tortured surface, which was repeatedly proven, hold, glue and dry much better.

Drying primer is mandatory to handle the skin. Also, the treated surface must be placed in such a way that the strips of the material are picked up at an angle of 90 degrees relative to one of the walls of the room. The place in which the chandelier will be suspended with the help of painting tape. Do not forget to turn off electricity before sticking.

Stage fourth. Cut the wallpaper correct

It's no secret that for sticking wallpapers, they first need to chop according to the required dimensions. For this reason, it is necessary to know how to perform cutting, without spoiling the material. Below is the algorithm of necessary actions.

At the beginning we take a roll and put it in such a way that the front side "watched" down.

Using the roulette, measure the corresponding length, after which we celebrate the place with the help of a pencil.

Prices for bulk glue

wallpaper glue

Where we put a mark, the material bend the material (the front part should be top) and smooth the resulting beggar.

At the end, we take the stationery knife and cut the banding strip (if we speak more precisely, then on the inner side of the latter).

Stage fifth. Draw a line for the first strip

When the ceiling is properly prepared, and the wallpapers are cut into strips of the required length, we need to schedule a line, in accordance with which we will perform the twinkling of the first wallpaper sheet.

So that the line is as smooth, score a pair of nails along the width next to the ceiling on the opposite walls. We bind and tighten the rope between these nails, pre-dot it chalk. Next, we pull out and sharply omit the rope - as a result, the white line will remain on the ceiling, according to which we glue the first strip.

Note! The markup of the line must be made before it becomes directly shooking the wallpaper.

Stage Sixth. Start sticking wallpaper

Here a lot depends on the type of wallpaper selected for the room. If we are talking, let's say, about vinyl or paper, the glue should be applied directly to the wallpaper lips themselves. In the case of using flieslinic wallpaper, the adhesive mixture should be applied to the surface of the ceiling. The glue that has been applied to the flieslinic wallpaper, you need to withstand within a few minutes, while in relation to paper it is unacceptable - the laying of the material on the ceiling should be made immediately after applying the adhesive composition.

We add that the strips of the material need to be laid parallel to the window to the window, as mentioned at the beginning of the article. Thanks to this, the joints will be almost invisible. When everything is ready, proceed to work. For convenience of visitors, the instruction is given in the form of a table.

Table. Potting ceiling wallpaper.

Steps, Nos.	Short description
	Stir glue. It should be very thick for reliable fixation of wallpaper.
	We take the first strip and apply an adhesive mixture on it, smearing from the center to the edges. At the same time, it is important that the glue in no way fell on the front part of the wallpaper.
	It all depends on how many people engaged in pasting. If you do it alone, then turn the harmonica flaw-smeared with glue, then the stamp on the line marked earlier, gradually sprawling the material. In the course of sticking, smooth out the material with a roller or a special brush-ironlock. If two work, one should climb the goat, holding the edge of the strip. Second at this time must hold the second edge and follow the process.
	Now we squeeze out from under the wallpaper, the remnants of the adhesive solution and air. We take a clean roller with this goal and ride it, heading from the center to the edges. To remove glue excess, use a sponge or rag.
	We carry out similar actions with the rest of the wallpaper stripes. Difficulties here may arise except with fitting the neighboring strip to the already glued. We make this jack, without an admission. If there are some kind of pattern on the wallpaper, then we need to combine neighboring bands (you need to take care of it even at the cutting stage).

Note! During sticking in the room there should be no draft. It is recommended not to open windows and doors for another period of time upon completion of work.

If one is working, you can make yourself a comfortable device designed to support bands, from a drywall profile by connecting it with the letter "T". In the video below, it is clearly shown how to damage the ceiling by wallpaper.

Video - Ceiling pasting with do-it-yourself

For sealing joints, you can use the ceiling plinth.

Common mistakes when sticking

The most common defect is a lagging material. This can occur after sticking on the old and peeling plaster. In order to avoid this defect, it should be first to remove the layer of plaster or paint. This is especially true in the case of a lime or chalk whitewash. After removal of the dilapidated surface, the surface must be treated with fixing paint.

When sticking glue, it is advisable to apply both the ceiling and wallpaper. As a rule, special adhesive solutions for heavy species of this material are used for this. Moreover, it is recommended to breed the glue somewhat thick than indicated in the manufacturer's instructions. The ceiling surface itself should be processed, and the smaller the thickness of the wallpaper sheets, the more carefully there should be alignment. If thick textured wallpapers are used, it is not so thoroughly aligned, since small defects will be invisible. Skuring and primer, as noted earlier, will help to increase clutch.

Prices on Stretch Ceiling

stretch ceiling

Pay special attention to air bubbles under the material, because they will be particularly noticeable when the light is turned on.

Finally, in order to avoid through-cutting, you should not sleep wallpaper for too long, and the glue layer should not be too thick.

Care rules

To extend the life of the wallpaper can be covered with lacquer. Most of the wallpaper under painting easily withstands at least several staining, so this option is extremely economical. And if the wallpaper is sprinkled, flushing the edges of the edges with glue and press them to the surface with a clean roller.

As for relief wallpaper, they are distinguished by the fact that dust and unpleasant smells absorb well. For this reason, such a material needs periodic cleaning for which a vacuum cleaner can be used, a dry rag or brush. Moisture-resistant wallpapers can be wiped with wet rags.

Video - Punning Flizelin Ceiling Wallpaper

Summing up

Actually, this can be finished. We found out that putting the ceiling wallpaper - this is a difficult thing, but with all if you wish, you can cope with your own. The main complexity of the process is that all the stages described above must be performed. If you should clearly follow the instructions, then there should be no problems.

Tsugunov Anton Valerevich

Reading time: 5 minutes

As an alternative to banal staining and whitewash, many prefer to wake the ceiling with wallpaper. They will hide small flaws of the base surface - cracks, small irregularities, - allowing less money and effort to spend on the preparation of the ceiling. A variety of textures, colors and designs at a reasonable value allows you to deploy the wings of fantasy. In addition, glued wallpaper on the ceiling can be independently, not attracting professionals for this.

Choose wallpaper

The selected style of wallpaper affects the pasting technology and some other features of the process. Experts recommend to stay on one of the following varieties:

paper;
vinyl on paper basis;
vinyl on fluiseline basis;
fliseline.

The choice will affect the condition of the base ceiling, the requirements for the material and the drawing, and financial capabilities. By the way, the paper option will cost you in the smallest amount, and vinyl and flieslinic wallpapers will cost more, but also will serve longer.

Important! For the ceiling, the material is selected with minimal weight. It should not exceed 110 g / sq. M. m. This parameter is usually indicated on the roll label.

Nuances of paper wallpaper

The surface and coloring of the canvases of this type may vary, the simplest lower layer has a rough texture, and the upper one is smooth. It is on it that the drawing is applied. Because of the small thickness, paper sheets are pretty hard to stick correctly, besides, they will repeat all the existing flaws of the ceiling. If it is uneven, it is better to give preference to another type of finishing material.

True, construction stores offer and thicker options for paper wallpapers - embossed. Such canvas are less demanding of the surface.

Vinyl on a different substrate: what glitter is easier?

Vinyl wallpapers differ among themselves by type of base (paper or fliseline). It is it that affects the technique of sticking and choosing a wallpaper glue:

the material on a paper substrate is impregnated with glue, and then applied to the surface, so it is not very comfortable to glue them, although it is still easier than ordinary paper wallpapers;
the canvas on a fiseline basis do not need to be lubricated with glue, the composition is applied only on the ceiling, so it is easier to work with them.

Flizelin - Perfect choice for the ceiling?

Wallpaper from phlizelin - non-woven material from cellulose fibers - a popular solution for the ceiling, give it an original appearance and a soft glow. At the same time it is permissible to perform up to 12 repainting.

Flizelin wallpaper is different:

high strength - to break them is randomly very difficult;
lack of shrinkage - not stretched from wetting, do not compress after drying;
compatibility with any surfaces;
the ability to level the ceiling with small defects.

Council. If you want to leave the ceiling with minimal effort, choose a wide freesisline wallpaper or based on it. Unlike cloths on a paper substrate, they do not need to be smeared with glue, the composition is applied only to the surface of the surface. It greatly facilitates work in uncomfortable conditions. A large bandwidth will speed up the process and reduce the number of seams.

We select wallpaper glue

Selecting the glue composition, must be taken into account the selected type of wallpaper. For the ceiling, this axiom is particularly relevant, because under its own weight heavy canvas, glued to inappropriate glue, can simply fall off.

The wallpaper glue is chosen according to the following principle:

For paper wallpapers, the adhesive composition on the starch basis is suitable, in which special components that prevent the development of fungus are added.
When using vinyl and flieslinic wallpaper, the starch glue with the addition of methylcellulose, which is characterized by high adhesion rates with base and plasticity should be selected.
If severe vinyl finishing materials are selected, glue for them in addition to starch and methylcellulose should contain polymer additives and biocides.

There are universal options for adhesives that are suitable for wallpaper of any type. Their parameters are adjusted depending on the amount of added water.

When buying carefully pick the glue composition, getting together the instructions.

Prepare the foundation

The ceiling can be concrete, drywall, you can also break the wallpaper on the chipboard and Phaneur. Before starting the final finish, the base should be prepared. To do this, it is cleaned, leveling, climbing cracks and other flaws. All previous coating must be completely removed. After completing these works, the base is ground.

Wallpaper with proper preparation can be glued even on complex surfaces:

on the ceiling, warmed by penplex or foam;
old PVC panels that do not want to shoot due to defects on the draft ceiling, which will have to eliminate;
the surface painted with oil paint, delete which is very difficult and from which wallpaper can fall behind.

Stages of preparation of concrete base are described in detail.

Read about the processing of plasterboard before falling around with wallpaper.

Marking ceiling

First of all, it is necessary to solve, along or across the long wall wobble walls will be glued. You can choose the direction of the bands by several principles:

Focusing on the location of the windows. Wallpapers must go perpendicular to them, in the direction of falling light, then the joints will not be as noticeable.
Minimize the number of seams. In this case, the stripes are located along the long wall. Please note that the gluing process will complicate: with long canvases, it is harder to be controlled both in terms of lifting to the ceiling and in terms of combining joints.
Making focus on the maximum simplicity of sticking. Working with short stripes is much easier than long, especially when finishing the ceiling alone. From this point of view, it makes sense to glue the canvas along the short wall, the width of the room.

First we plan a guide line for the first strip. The easiest way to do is with the help of a laser level or pull from one of the walls of the lace, along which the labels are set.

Important! If the ceiling plinth is not yet installed, you need to make a markup so that the extreme cloths enter the wall with an adhesive in 2-3 cm.

Cut the wallpaper

It is possible to make it easier to work if you pre-cut the required number of strips. They consider it, given the parameters of the room, the width and the length of the roll.

If the drawing fit is required, it should also be taken care of the cutting stage.

Glue paper wallpaper or vinyl on paper based

These two types of material are glued through the same principle, with one difference: the paper canvas, especially thin, require significantly more careful circulation. After impregnation with glue, they can break and hang out.

Order of work:

Smooth layer applied glue mortar directly to the canvas.
We fold the cut wallpaper, but not as for the walls, in half either the "converter", but "accordion", we leave for 5-10 minutes. It is important to ensure that the glue does not hit the front side.
We apply glue and on the base using a medieval roller for this.
We apply a material strip to the markup line in any comfortable corner with a small adhesive on the wall, smooth out with your hand from the center to the edges, gradually fixing everything canvas.
Excess glue and air bubbles are expelled using a brush or a plastic spatula, performing movements from the center to the edge at an angle of 45 °.

One person is unlikely to be able to qualitatively perform the specified actions, it is better to find an assistant.

Council. You can cope with sticking paper wallpapers alone with the help that will support the canvas, and several tables or building goats made up in a row for moving on them.

Glue phlizelin wallpaper or vinyl on a fliesline basis alone

We also combined the specified types of wallpapers: they have a total blowing technology. Its use will help separate the ceiling yourself, without helpers.

We apply glue directly on the base with a uniform thick layer, using a long pile roller for this purpose. Do not cover the composition at once the entire ceiling, it is enough to lubricate the surface on the bandwidth with a small margin.
The edge of the cut wall of wallpaper, pre-strolled into the tube, apply to the mark.

The last stage is the same for all types of wallpaper:

Surplus material in the ceiling plinth is cut into a sharp knife, which is based on a wide metal spatula used as a ruler, as the next photo.
If the box is not yet installed, it is left in a few centimeters, which is cut off after drying in the same way.

Wallpaper on the ceiling is an excellent alternative to packer and painting, because they allow you to hide defects and irregularities, they have high decorativeness and more than inexpensive. A huge selection of textures and colors practically does not limit your fantasy: with the help of wallpaper you can give the ceiling any desired look, and this can be done independently without resorting to expensive services of professionals.

How to choose a wallpaper for the ceiling

The choice of wallpaper, presented in the finishing materials, is simply huge, they differ in appearance of the base and facial coating, as well as on purpose. From the type of wallpaper, the technology of their blending on the ceiling depends.

The following types of wallpaper are best suited for the ceiling:

paper;
vinyl;
fliseline.

The choice of wallpaper type depends on several factors: the type of room, the state of the draft ceiling, the requirements for the texture of the surface and coloring, as well as on financial capabilities. The cheapest is simple paper wallpaper, vinyl and phliselinic are more expensive, but is more durable and more practical.

May have a different surface and coloring. The most simple samples have a grungy bottom layer and a smooth facial surface with a drawing. The thickness of such wallpapers is small, so they completely repeat the relief of the surface and detect all irregularities. They can only be glued on the perfectly smooth ceiling.

Embedded or structural paper wallpapers are thicker, they are able to hide microcracks and small irregularities. Stripes of embellished wallpapers glue jack, while observing the seam technology becomes invisible.

Paper photo wallpapers are used to finish a multi-level ceiling and decorating niches and arches. Ceiling photo wallpaper can imitate the day or starry sky or have a large original drawing. The technology of their blowing is the same as in ordinary paper wallpapers, but it is necessary to clearly combine the drawing.

Vinyl wallpapers May have a different base, paper or fliesline. From the type of foundation depends the choice of glue and the convenience of sticking.

The outer, the decorative side of the vinyl wallpaper is also different, the texture distinguishes:

flat vinyl - vinyl spraying on a paper basis, has a small relief;
silkographic - a type of flat vinyl, silk threads are used in the face layer, due to which the finish effect is created by an expensive cloth;
the foam vinyl is a relief layer obtained by a cold embossing method that simulates almost any texture, from ceramics to the tree;
solid vinyl - the surface of thermally treated evaporated vinyl has a solid and dense structure;
polyplane is a variety of solid vinyl with a water-repellent washing surface.

Vinyl paper wallpapers are distinguished by increased wear resistance and durability, as well as the ability to hide the defects of the draft ceiling due to the dense and relief structure. Washing types of vinyl wallpapers can be used without fears to finish the ceiling in the bathroom.

Fliselinova wallpaper There are two types: embossed monophonic wallpapers, intended for further painting, and two-layer wallpapers with vinyl spraying on a fliesline basis, they can have any texture, color and drawing.

Wallpapers Under painting simultaneously imitate decorative plaster and are used to impart the ceiling of the relief and soft glow. They can be repainted several times, while they retain their texture and properties.

Flizelin wallpaper for painting on the ceiling

Flislinic wallpaper with vinyl spraying have decorativeness and are used for original finishes in any, including wet rooms. Flizelin base is stronger than paper, so such wallpaper is more resistant to external influences.

Note! Fliselin is a transparent material, so it can shine on the ceiling with inhomogeneous color. Before you take such a ceiling, you need to attach a piece of dry wallpaper to sections with color drops. Perhaps the surface will have to be pre-soldered.

In some cases, other types of wallpapers with certain flaws are used to finish the ceiling, due to which their use is not widespread.

- Fabric coating on a paper or synthetic layer. They stick them along ordinary technology, while the feeling of deep structure and expensive finishes are created. Lack of textile wallpaper - high price.

- Cellulose colored crumb, which when soaking in water turns into plastic mass. It is applied to the ceiling by a thin layer like plaster, after drying, a decorative coating is formed, resembling structural wallpapers. The disadvantage is the complexity of applying and removing from the ceiling.

Glass equipment - Polymer coating applied to fiberglass. Due to the increased resistance to moisture, they can be used in the bathroom or in the kitchen. The lack of material is a fairly heavy weight and a small selection of colors.

For each type of wallpaper, it is necessary to use suitable glue. This is especially important when finishing the ceiling, because under the influence of gravity, heavy wallpapers, abacted for insufficiently durable glue, simply will begin to fall off and your works will go to the pump.

Types of wallpaper adhesives:

glue for paper wallpaper consists of a starch basis with the addition of antifungal components;
glue for vinyl and fliesline wallpapers based on starch and methylcellulose, which has a more pronounced clutch with the basis and plasticity;
adhesive for heavy species of vinyl wallpaper based on starch, methylcellulose, biocide and polymer additives;
pVA glue for glasses.

There are also a number of universal adhesives suitable for any type of wallpaper on paper or fliseline base. Their properties depend on the degree of breeding by water.

How to choose a wallpaper glue?

Carefully read the recommendations of the wallpaper manufacturer on the label. As a rule, there is a type of bulk glue, and sometimes the recommended manufacturer. If there is no instructions on the label - specify the type and composition of the wallpaper and select the glue on the basis of this.
Some types of adhesive compositions include a component that makes an easy glue light shade. When applying such adhesion on the wallpaper sheet, uncovered sections are clearly visible, which makes it easier to work. After drying the glue, the shade disappears.
When sticking paper and vinyl wallpapers on paper based, glue is applied both on the ceiling in the form of primer and on the wallpaper stripes. In this case, you can use universal glue divided in different concentrations to avoid excess spending.
Fliseline wallpapers are glued differently: glue is applied only to the prepared ceiling, and wallpaper sheets are left dry. For reliable stickers, it is recommended to select high-quality glue designed for flieslinic wallpapers.

Note! It is necessary to breed the glue strictly according to the instructions, only in this case its adhesive ability is guaranteed. It is possible to store the divorced composition no longer than a few days.

Glue for wallpaper "Methilan"

Preparation of the ceiling to wallpaper sticker

You can glue wallpaper on both concrete surfaces and plasterboard. In some cases, it is permissible to glue wallpaper and on other types of trim: Faneru, OSB. The main thing is that the surface is smooth, smooth and without peeling residues of the old coating.

Concrete ceiling

Preparation of a concrete ceiling to wallpaper sticker includes several stages.

Step 1. First you need to remove an old coating from the ceiling. If it has already been saved by wallpaper, they are wetted, they give to swell and gently remove the stripes. Remove the peeling putty and cleaned with a sandpaper or painting mesh.

Plotters on a chalk or lime-based basis also need to be removed. To do this, it is wetted with water or one of the washing compositions, withstand a few minutes and remove the spatula or wash off with a sponge. Water based paint also need to be washed. If the ceiling is painted with waterproof paint and it holds hard, it can not be flush.

Step 2. Next, it is necessary to close all the slots and cracks and align the surface of the ceiling. The seams between the ceiling plates are putting off with a gypsum composition using a sickle tape. Cracks and joints of the ceiling and walls also wipe the starting putty. Dried it and sanded with small sandpaper.

If you plan to stick on the ceiling, the dense non-translucent wallpaper of dark tones, the finish putty is optional. For flieslinic light wallpapers, it is necessary to apply on the entire surface of the ceiling layer with a finishing light putty layer to align the tone and avoid dark spots on the plated ceiling.

The finish putty is applied with a layer of up to 2 mm with a wide spatula. After applying it, it is dried at least a day, pushed with a small mesh or hider and spend off from dust.

Step 3. The ceiling under the wallpaper sticker must be primed to associate the smallest particles of dust and ensure good adhesion of the adhesive composition. As a primer, wallpaper glue, divorced in a weaker concentration, can be used than for stickers of the canvas.

The primer is applied with a roller or a wide brush until the ceiling is completely wetting. After complete drying, it is possible to apply another layer for the best result, placing brush strokes perpendicular to the first layer.

Ceiling of plasterboard

Preparation of the ceiling of plasterboard as a whole does not differ from the preparation of a concrete ceiling, except for the need to level the ceiling. The seams between the sheets of drywall are close to a special composition based on plaster (for example, "Knauf Fougauller"), also align the sheets in the places of self-fasteners.

If the sheets have a light shade, the finish putty under the wallpaper can not be applied. Before sticking, the wallpaper is applied to the ground layer, following the sheets not too wet, otherwise they can be separated.

Ceiling from OSB or plywood

The ceiling finish with these materials is rare enough, more often in wooden houses. Such surfaces are quite suitable for blending wallpaper, if they align them and ensure good gluing. For this, the surface of the ceiling from the OSB is put off first starting, then the finish putty and ground. Faneur can not be completely completely, it is enough to close the joints, dry and apply a layer of primer.

Technology sticking wallpaper

Example of calculating the number of rolls

Wallpaper bands are taken perpendicular to the window, so the joints will be less noticeable in daylight. The size of the same band takes the size of the room in this direction plus a small margin on trimming at 10-15 cm. For example, with the length of the room in 4.6 m, the length of the band will be 4.6 + 0.15 \u003d 4.75 m.

Next, you need to calculate the number of strips. For this, the length of the wall along the window is divided into the width of the wallpaper liked and round the result in the whole side to an integer. For example, with a width of a room of 3.2 meters and the width of the wallpaper, 53 cm will be needed 3.2 / 0.53 \u003d 6.37 bands. When rounding up to a larger whole, there are 7 bands.

After that, the number of strips in one roll is calculated. For this, the roll length is divided by the length of the strip and round down to a smaller side to an integer. According to the above example, the length of the strip of 4.75 meters and the roll length of 10.05 m will be 10.05 / 4.75 \u003d 2.11, 2 bands from the roll will be released at a smaller side.

To determine the desired number of rolls, the required number of bands should be divided into the number of bands in the roll. Example: 7/2 \u003d 3.5. Round up to a larger integer and get 4 rolls. They should be enough for pasting ceiling in the room of the sizes.

Note! Wallpaper can be different widths and lengths! When calculating, it is necessary to take into account.

Ceiling Wallpaper Sticker: Step-by-step instruction

After the preparation of the ceiling and the choice of suitable wallpaper can be processed to their sticker. Glue any wallpaper is more convenient together.

To work, you will need such devices and tools:

stable stepder or table;
bucket or pelvis for glue breeding;
roller from a foam rubber or a wide brush for applying glue;
wide spatula and construction knife for trimming wallpaper;
rubber roller and plastic spatula for smoothing wallpaper;
roulette, pencil and square;
soft fabric to wipe glue drips.

Step 1. It rolls out the wallpaper on a dry and clean surface face down and cut them into the bands of the desired length, not forgetting about the reserve of 10-15 cm. Wallpaper with a large expressive pattern, in addition, they need a fit so that the drawing needs to be combined. It is more convenient to cut up the face of the face, placing the strips nearby.

Step 2.Place the ceiling in order to arrange the wallpapers strictly perpendicular to the window. To do this, with the help of a roulette, the distance from the side wall is measured equal to the width of the wallpaper roll, for example, 50 cm. Mowed perpendicular with the help of the coated and fill the strip directly on the ceiling. You can also place the ceiling with a chalk cord.

It continues to the opposite wall and measure the distance to the side wall. If it corresponds to the original, then the angles in the room are close to 90 degrees, and the adjustment is not required. If the measurement results are very different, you need to draw another guide line so that the lane of the wallpaper closes the entire space to the wall. Perhaps you will have to cut it after the stickers, but in this case the following bands are lying exactly and without distortion.

Step 3. Dil place glue according to the instructions on the package. This is usually done like this: the desired amount of cool or warm water is poured into the pelvis, they actively stir it, creating a whirlpool, and fall asleep dry adhesive composition. It is well stirred and left for swelling, after which they are stirred again.

Step 4. Apply glue to wallpaper strips or ceiling depending on their type. Wallpapers on a paper basis are smeared with glue and leave for impregnation. Wallpaper impregnation time is given in the table.

Table. Time impregnation of wallpaper glue.

Glue on the wallpaper is applied: the roller or brush is dipped into glue, slightly press the edge of the bucket, and then apply wallpaper lane stacked by the face down, from the center to the edges. Particular attention is paid to the edges of the bands.

After spreading glue, the wallpaper is folded according to the scheme in the figure in the form of a harmonica - it is more convenient to glue them to wallpaper.

The phlizelin base in impregnation does not need, so the glue is applied to the ceiling, after which the dry lane is applied to it, sliced \u200b\u200binto size with a small margin.

Step 5. After impregnation of wallpaper, apply the first strip to the line previously spent on the ceiling and pressed with a soft cloth. The stock of the wallpaper is evenly set on opposite walls.

Align the strip relative to the wall and the control line, smooth the wallpaper with a soft plastic spatula or brush and rubber roller, removing bubbles and wrinkles. It is more convenient if one wizard aligns and smoothes the wallpaper, and the second supports the remaining part of the strip with hands or with a bar on a long handle.

Step 6. Without waiting for the wallpaper drying, the margin of wallpaper is trimmed near the walls. To do this, we apply a wide metal spatula to the joint of the wall and the ceiling and on it with a sharp mounting knife cut off the excess part of the strip. Cress the edge of the wallpaper to the wall and smoothes it.

Step 7. The next wallpaper band is glued in the same way, while thin paper wallpapers are glued with a small margin, and embossed and vinyl - jack. The joints between the stripes are thoroughly rolled with a rubber roller, if necessary, be additionally missed by glue using a brush. In the same way, all bands are glued until the end of the ceiling.

Thin paper wallpapers are glued with a small margin, and embossed and vinyl - jack

Step 8. When sticking the strip on which the lamp is located, you must turn off the switch and the protective machine and remove the lamp by turning it off from the wiring. Wiring isolate and filled into a hole in the ceiling. The strip is glued as usual, and after smoothing to the touch, they find a hole or hook, the wallpaper is waiting in this place with a cross-knife with a crosswise and flexing the corners. Crop the extra wallpaper and pressed the edges with a brush or soft spatula.

Note! In case of trim, it is necessary to consider the diameter of the decorative bowl of the lamp - it must completely block the hole in the wallpaper.

Dry the ceiling, hoveed by wallpaper, in vivo, not allowing drafts. With active streams of cold or warm air, the canvas enhance unevenly, which can lead to partial detachment. For this reason, it is impossible to open the vents, and the heating batteries in winter are recommended to cover a slightly damp cloth.

Video - Ceiling Wallpaper Sticker

The ceilings, which were plated by wallpaper, look original and fresh, besides, using different colors and textures, you can create a unique interior. Special care ceiling wallpapers do not require, they can sometimes be enough for a soft brush to remove dust. The ceiling, plated wallpaper - it is beautiful, comfortable and comfortable.