Decorative frames for pictures with your own hands. Do-it-yourself photo frames made of cardboard, paper, improvised materials on the wall with your own hands

Probably each of us has photos that we want to keep forever. It is for such photos that you can make a beautiful photo frame with your own hands.

You can decorate your home with a handmade frame or just give it to loved ones.

How to make a photo frame out of cardboard

1. Cut out a rectangle of any size from cardboard.

2. In the middle of the cut out rectangle, cut out another rectangle. Its size should be slightly smaller than the size of the photo.

3. Decorate the frame however you like.

You can use stickers and/or draw something.

You can also draw animals on colored paper, for example, then cut them out and glue them to the frame.

4. Prepare another sheet of paper and cut a rectangle out of it. Its size should be equal to the frame size.

5. Glue this rectangle to the back of the frame, leaving one side untaped so you can insert your photo through it.

6. It remains only to insert a photo!

DIY photo frames. Frame from the pages of a magazine.

This frame not only looks original, but you also don't have to pay a penny for it, since its main element is the pages of a magazine, and any that you can only find at home.

You will need:

Cardboard

Old (unnecessary) magazines

Thread for sewing

PVA glue

Scissors

Utility knife (or scalpel)

Ruler

Pencil

1. Prepare a sheet of thick paper or cardboard about 20x25cm in size. Measure 5cm from the edges of the sheet and draw a 10x15cm "window" in the middle.

2. Cut out the "window" with a utility knife.

3. Start rolling the magazine pages as tightly as you can. To fix them and prevent unwinding, use glue.

4. Prepare your colored sewing thread and start winding it around the twisted magazine pages. Continue until you have many of these blanks.

5. When the blanks are made, start bending them at an angle of 90 degrees in the right places and attach them to the cardboard frame with glue.

6. Prepare a small piece of cardboard for the legs. Also cut out two cardboard strips and glue them to the back of the frame so that you can insert a photo between them.

How to make a beautiful frame. Frame as a gift.

You will need:

Simple inexpensive wooden frame

piece of cloth

PVA glue

Ruler

Glue brush

Scissors

1. Prepare a piece of fabric on which to lay the frame. Cut as much fabric as you need to cover the edge of the frame on the front and back.

2. Now you need to cut out the excess fabric from the middle of the sheet.

3. Lay your frame on a rectangular pattern and cut out squares from the corners, this way you will provide yourself with neat corners.

4. Gently, using PVA glue, stick the fabric on the 4 sides of the frame, but just be careful not to wrinkle it. This must be done on both sides of the frame - front and back.

5. Now make diagonals at the corners of the frame. To do this, cut each corner inside your photo frame. Next, you need to fold the fabric and glue it to the inside.

* There is an option to paste over the back side of the frame with a cloth.

When the frame is dry, you can decorate it with ribbon.

How beautiful to make a frame on a spring theme

This frame is made in the spring theme. She looks gentle and romantic.

You will need:

simple frame

Artificial flowers

Glue gun (can be replaced with PVA glue).

1. Divide the flowers into inflorescences.

* If you wish, you can make flowers with your own hands. To learn how, check out one of our tutorials:

2. This example uses small petals that have been cut out of colored paper. These petals need to be glued to the frame with a glue gun or PVA glue.

* To make it more convenient, try to start gluing the petals from the corner of the frame. Next, gradually fill the frame with petals.

* It is worth noting that the petals need to be glued tightly to each other, so your flower bouquet on the frame will seem more magnificent.

3. Use ribbon, lace, or pretty paper to wrap around the edge of the frame.

How to make photo frames. Painting from photographs.

If you have a lot of favorite photos, but you just don't want to buy a separate photo frame for each, then you will like this project.

Just one large photo frame that can fit multiple photos at once (the size of the frame depends on the number and size of photos)

You will need:

Large picture frame (wooden or plastic; choose your size)

* In this example, the frame size is 40x50cm.

Small nails (can be replaced with push pins)

* You can choose a set of multi-colored push pins.

Hammer

Jute (or any rope to which you will attach photos)

Measuring tape

Clothespins

* You can look for sets of small multi-colored decorative clothespins, or use regular ones, as in this master class.

1. In this example, space was measured for 5 rows of small photos, similar to those taken with Instagram. You measure the distance you need between the photos, both vertically and horizontally.

2. After that you have measured everything, nail the carnations in the right places of the frame on the right and left (or insert push pins) and pull the rope.

3. Gather your favorite photos and attach them to the string with clothespins.

The photo frame is ready!

DIY frames. Flower photo frame.

You are free to choose the color and shape of the flowers, just use your imagination.

You will need:

simple photo frame

acrylic paint

tassel

Dense material (fabric) from which you will cut flowers

Multi-colored buttons, thread, needle

Scissors

Pen

Super glue

1. Prepare the frame and paint it with two coats of acrylic paint. Choose the color yourself.

2. With a pen or pencil, draw the shapes of the flowers on a dense fabric and cut them out. You can decorate them with colored thread and sew a button on top.

3. Now it remains to glue all your blanks to the frame using superglue.

4. Add a photo!

DIY photo frames. Thread wrapped frame.

Another option for a beautiful and inexpensive photo frame.

You will need:

Simple photo frame with smooth sides

PVA glue

Several threads of different yarn colors

Scissors

1. Prepare the frame and put some glue on it. You need to do this in parts, i.e. a little glue should be applied to a small part of the frame and then wrapped around this part with a thread.

2. Start winding the frame gradually with multi-colored threads.

3. Add a photo!

Children's photo frame. Carousel.

You will need:

5 disc cases

10 photos of sizes approximately 12x17cm

10 unnecessary disks

PVA glue

Ruler

Pencil

Scissors

Scotch tape (duct tape is better)

Disc stand

Decoration tools (stickers, colored paper, glitter, etc.)

1. Take the disc out of the case.

2. Insert 2 photos on the left and right into the case. If necessary, crop the photos so that they fit well and look good in the disc case.

3. Using electrical tape or tape, connect several cases as shown in the picture.

4. Get your unwanted discs ready and slide them onto the stand (more specifically, the stem of the stand), shiny side up, to create a slippery surface for your photo cases.

5. It remains only to put a "flower" from the cases with photos on the rod of the disc stand.

DIY photo frame. Ideas.

How to make a photo frame with your own hands (video)

How to make a frame with your own hands

How to make a paper frame

DIY paper frame

DIY children's photo frame

When thinking about how to make a frame for a picture with your own hands, you need to remember that the frame is just a frame. It should form a single whole with a canvas or a picture, emphasize the dignity of the image, shade it favorably.

Frame Design Rules

A significant aspect when creating a frame is the design line and the purpose of the room in which the picture will be placed. When choosing the color of the frame, the main thing is not to oversalt. Too saturated bright color will be unpleasant for the eyes and will not fit into the main design feature of the interior. And a picture or photograph in such a frame will fade, lose its basic perfection. If this still happens, you do not need to be upset. You can always change something: paint, shape, finish, etc. This is the main advantage of independent creativity.

By trying different materials, finishing methods, you can ensure that the image you want to decorate the room with will sparkle with new colors. To do this, you can try to hang the image at a different angle, changing the flow of light, or near the furniture object, with which the frames, pictures, photographs will make up a single complete composition. By trial and error, you can achieve wonderful results.

What can a frame be made from?

Frames for paintings, photographs or wall panels are made from various materials. Can be used:

wood;
cardboard;
material;
plastic;
plaster molding.

This is just a small list of materials from which a do-it-yourself picture frame can be made. Of the tools and devices, depending on the material, you will need:

scissors;
hacksaw or jigsaw;
tape measure, ruler, square;
pencil or marker;
miter box;
thin nails;
adhesive for a specific material;
stain or paint;
finishing elements.

The main thing is that the image and the frame framing it do not dissonate with each other, they form a single composition. Only in this case will you get an interesting design element that will decorate the room and delight.

Wooden picture frame

Wooden canvas frames are a classic option for framing art canvases. As a rule, such frames are made in neutral colors. They are given a simple form, without complex decorative elements, such as carvings. Without special skills, it will be difficult to make a carved frame.

The easiest way is to make a wooden frame from a slat of the required width. By the size of the canvas, you need to make 4 blanks, in pairs equal to each other. To fix the canvas in the frame, the final one must be done in such a way that it overlaps the image with the inner perimeter by approximately 0.5 cm.

A more complex option is a frame made of wood with glass. For such a frame, a plywood back wall is required. The parameters of the picture, glass and canvas should be slightly smaller than the outer dimensions of the frame. Without the skills to work with glass, you can order the necessary sheet in a special workshop.

The inner edge of the slatted blanks must be deepened, focusing on the thickness of the canvas and glass. Usually 2-5 mm is sufficient. Next, the planks are cut at an angle set by means of a square. You can use a miter box. The sections are processed with sandpaper and glued into a whole square or rectangle. The glue will dry in about 4-5 hours.

You can strengthen the docking of wooden components with a wood stapler. Staples are placed on the inside. Next, the frame can be painted, varnished, applied drawing. Any layer of decorative coating must be dried before applying the flowing layer.

Glass is first inserted into the finished frame. The frame is then turned face down and the picture is placed on top of the glass. A sheet of fat cardboard is placed on top of the canvas. Trying on a plywood back. If its dimensions are correct, the plywood is glued to the frame around the perimeter. For better fixation in the corners of the product, small nails are hammered in. Next, you need to attach the loop and hang the canvas on the prepared place.

Another option is to buy a ready-made wooden frame in a special store and arrange it to your liking. You can use painting, varnishing, fitting with material. You can decorate the frame with small objects or tie it with a crochet.

Soft canvas frame

Soft frames for funny pictures or photos will be very appropriate in a childish room. It's easy to make them. First you need to assemble a frame from wooden slats. They are fastened with thin nails or glue. The inner perimeter of the frame should be 2-3 mm smaller than the image.

From cardboard, you need to make a template, outlining the frame around the perimeter. The cardboard version must be cut and cut into 4 components. According to the cardboard template, you need to cut the material. In this case, you need to make the details 2 cm larger so that the frame is voluminous, and add a 1 cm seam allowance.

Pieces of materials need to be folded, stitched from the inside along the long side and turned out. Then they are stretched on a wooden frame and filled with filler to give volume. You can use synthetic winterizer, cotton wool, thin scraps of fabric. Then the fabric is sewn by hand with a blind seam on the front side. The seam is applied on the short sides of the parts. The ends of the threads are displayed on the return side of the product. On the back side you need to glue thick cardboard.

How to make a cardboard frame

Cardboard is a popular, publicly available material that provides many opportunities for creativity. Do-it-yourself cardboard frame is quite simple. Special tools and skills are not required. Therefore, this can be a great opportunity for joint creativity of parents with children.

Therefore, for example, a do-it-yourself photo frame made of cardboard is made more than wood. There can be a lot of design options for such a product. The main thing is to carefully make a cardboard base and decorate it in an original way. For decoration, you can use everything that is at hand:

beads;
the cloth;
buttons;
small accessories;
dry food nutrition;
pieces of various materials;
small radio components;
elements of a childish mosaic, puzzles, constructor.

First you need to cut out the cardboard base. You can use corrugated cardboard, for example, a packing box. A window is cut inside the base. Its size is determined by the parameters of the picture or picture for which the frame is intended. The width of the frame itself can be from 4 cm or more.

Then you need to cut out the back of the frame, identical in size, and the leg if the cardboard frame will stand on a table or on a bookshelf. For the leg, it is necessary to cut out a rectangle measuring 7x17 cm and sharpen it from the end side. From the other end, it is necessary to bend the edge 2 cm wide.

Now you need to glue the frame. To stick a leg to it, you need to grease the bent strip with glue, place it in the middle of the back and press it tightly. It is best to use PVA glue. You can start decorating.

Frame for canvas from improvised materials

A beautiful and originally designed picture frame made from improvised materials will undoubtedly decorate the room on a par with the picturesque canvas placed in it. Baguettes for a similar frame can be made, for example, from a fillet (ceiling plinth), molding or stucco molding left after the repair of the apartment.

The basis for such a frame can be made of corrugated cardboard or thin plywood. The basic principles for creating such a framework have been described above. Next, you need to cut baguettes from the prepared fillet or molding. The corners of the prepared planks must be cut at an angle of 45º. To do this, it is better to prepare a paper template, at which angle it will be set using a protractor.

Prepared baguettes must be glued to the frame base. To do this, you can use universal polymer glue or a glue gun. Corner gaps and other minor errors must be carefully sealed with putty.

After the glue has dried decisively, it is necessary to cover the corner seams and the line of contact between the baguettes and the base of the frame with putty. To do this, strips of foam are glued between them and cleanly putty. If desired, the ends of the frame on the outside can simply be treated with putty several times. Each layer must be thoroughly dried and cleanly sanded.

After the final drying of the finishing layer of putty, the finished product must be painted. Paints are best suited water-based or acrylic. Before painting the frame, it is necessary to give the paint the desired shade. For the final coating, it is preferable to use a water-based varnish in total. Now you can make a leg on the back side of the frame or attach a loop. After the canvas is inserted, the frame will take its place on the wall or on the chest of drawers.

How to make a cardboard photo frame

The cardboard frame can simply be painted with acrylic paint. The color of the paint should be selected, focusing on the color scheme of the image that will be placed in it.

A decorated frame will look more interesting. For example, a painted frame can be pasted over with coffee beans, buttons and other small items. Decor elements must be placed close to each other. You can do this in a chaotic manner or create some kind of composition.

A fascinating option will turn out if the painted cardboard frame is pasted over with a shell. To do this, it is necessary to remove the shell from hard-boiled eggs in large pieces and paint. You can use the shells of eggs painted for Easter. The main thing is to observe a single color scheme. After the paint has dried, the shell must be crushed and glued onto the cardboard base.

To decorate the frame with beautiful paper, you need to proceed in the following order. Paper for decoration (so, wallpaper) must be placed face down on the table. Then draw a rectangle on it the same size as the frame. Inside this rectangle, stepping back 30 mm from the outer edge, you need to draw another 1. Its size is determined by the size of the photo.

In the inner rectangle, it is necessary to connect the opposite corners with diagonals, measure 15 mm from them, and put dots. By connecting the points shown, we get 1 more rectangle. It needs to be cut diagonally with a breadboard knife and unscrew the corners. Then you need to bend the sides of the outer rectangle, neatly filling out the corners. To do this, you need to make small incisions. Then the frame must be folded into a box and fixed with a stapler. Cut out the back wall from cardboard and stick it on.

In a similar way, you can make a three-dimensional frame from thick paper and decorate it. You can use petals, hearts or geometric shapes made of colored paper. You can roll up rolls of paper strips and stick on top of the base. This type of creativity will bring a lot of pleasure to children and help them acquire basic skills in working with paper, glue, scissors.

Newspaper frame - it's interesting

Baguettes for a similar frame are made from ordinary newspapers. It is advisable, of course, to take newspaper sheets with a color press. This will create a more interesting composition. Newspaper sheets for the manufacture of frame parts must be deployed on a large table. Then the newspapers are folded into a tight tube, gluing any layer of paper with a glue stick. The main thing is that all the tubes of the former are folded with identical density. The same thickness will facilitate their connection.

For any of the 4 baguettes, you need to glue from 4 to 9 newspaper blanks. The width of the bar depends on their number. Through the day, when the glue dries, the finished baguettes are cut at an angle of 45º from both covers. To do this, you need to use a miter box or a protractor.

Cut strips must be glued at a right angle (90º). You can strengthen the frame with a tenon-groove connection. The spike can be made from a toothpick, and the groove can be neatly pierced with an awl. Interangular cracks should be covered with putty.

The canvas is inserted into such a frame as follows. At a distance of 5-8 mm from the central window of the frame, 4 newspaper tubes must be glued on the return side. In the upper tube, it is necessary to make 2 punctures with an awl in order to pass the wire or string. This will leave a loop for hanging the picture.

The finished frame must be primed with the following composition:

PVA glue - 2 parts;
water - 1 part;
paint, water-based or acrylic, snow-white color - 2 parts.

The ingredients must be mixed, adding water little by little, so that the mixture resembles liquid sour cream in consistency. The primer must be applied 2 to 4 times, each time drying the product. Then the frame can be painted with acrylic and varnished. The canvas must be inserted from the back of the frame and secured. To do this, you will have small nails or adhesive tape (clerical).

So, the question of how to make a frame for a canvas or photograph is solved quite simply. The main thing is to try a little, connect your own imagination or use the options presented by the taller.

Finding a beautiful frame for a photo, embroidery or painting is another quest. How many stores do you have to go around to successfully pick up a frame that is suitable in design, size and shade? There is a good option - to figure out how to make a frame with your own hands and do this process personally. Since not every needlewoman can afford a wooden photo frame, we offer you simple options. Detailed master classes on making frames can be found in this article.

Cardboard frame

Everyone can make a frame out of cardboard with their own hands - it does not require a lot of time, nor special skill, nor any special materials.

For work you will need:

Cardboard is better corrugated.
Fabric or paper for decoration - your choice.
Buttons, beads, rhinestones, shells and other decorative accessories for decoration.
Glue brush, PVA glue.
Stationery knife and scissors.
Ruler and simple pencil.

Important! It is not at all necessary to make a rectangular photo frame - round, oval, irregular shapes, with curls and bends also look very beautiful and original. Here everything will depend only on your imagination.

Sequencing:

Put the photo in the center of a sheet of cardboard, circle the photo with a pencil.
Inside the resulting rectangle, draw another one with sides 1 cm smaller (this will be the “window” for the photo).
Draw a rectangle outside the circled photo - these will be the margins of the frame (they should be equal in width).
Cut out the front of the frame.
Circle it on another piece of cardboard.
Draw a rectangle inside the one that turned out, with sides 2 cm smaller - this will be the back.
Cut it out.
Determine how much fabric or paper you need to decorate the craft, and cut off enough to allow you to fold the edges inward.
Spread PVA glue on the front of the frame and glue the prepared paper to it, then let the glue dry thoroughly.
Glue the back of the frame to the tucked edges of the decor material - do not glue the side or top sides so that you can stick a photo there.
Decorate the finished product by gluing the necessary decorations.
Make a loop or stand for hanging crafts on the wall.

Important! If in the process of working to make a frame with your own hands, you do not have enough cardboard, then for the back of the product you can use plain paper or glue two strips of cardboard from the back to the “window”.

Frame from magazine pages

This craft not only looks original, but it can also be made completely free of charge, because its main element is magazine pages that you can tear out of any unnecessary magazine.

For work you will need:

Pages of old unwanted magazines.
Cardboard.
PVA glue.
Thread for sewing.
Scissors.
Ruler.
Stationery knife.
Pencil.

Sequencing:

To make a photo frame with your own hands, prepare a sheet of cardboard or thick paper about 20x25 cm in size. Measure 5 cm from the edges of the sheet and draw a “window” 10x15 cm in the middle.
Cut out the "window" with a clerical knife.
Start rolling the magazine pages as tightly as possible into tubes. To fix them and prevent unwinding, use PVA glue.
Prepare colored thread and start winding it around the twisted pages of the magazine. Continue until you have many of these blanks.
When the blanks are done, bend them at an angle of 90 degrees in the right places and secure them to the cardboard frame with glue.
Prepare a small piece of cardboard for the legs. Cut out two strips of cardboard and glue them to the back of the frame so you can insert a photo between them.

Frame wrapped in thread

Another option to make a frame with your own hands is to braid it with a thread.

You will need:

A simple photo frame with smooth edges.
Several multi-colored threads.
PVA glue.
Scissors.

Sequencing:

Prepare the workpiece and apply a small amount of glue to it.
Start gradually wrapping the frame with threads of different colors.
Add a photo.

Frame on spring theme

This frame is made on the theme of spring. She looks romantic and gentle.

You will need:

A simple photo frame.
Artificial flowers.
PVA glue or glue gun.

Sequencing:

Separate artificial flowers into inflorescences (if desired, flowers can be made independently from paper or fabric).
Glue the flower petals to the frame with glue or a glue gun.

Important! To make it more convenient, try gluing the petals, starting from the corner of the frame, then gradually filling the entire frame.

Use lace, ribbon, or pretty paper to cover the edges of the frame.

Frame as a gift

Sometimes it is very difficult to choose a gift, but what could be better than a gift made by oneself. So, in order to make a frame with your own hands as a gift, you will need:

Simple wooden frame.
Piece of fabric.
Ruler.
PVA glue.
Scissors.
Glue brush.

Sequencing:

Prepare a piece of fabric on which to lay your frame. Cut as much fabric as you need to cover the edge of the frame on the front and back.
Now cut off the excess fabric from the middle of the sheet.
Put the craft on a rectangular pattern, cut out squares from the corners - this way you will ensure neat corners.
Carefully, using PVA glue, glue the fabric to the sides of the product, but just be careful not to wrinkle it. This must be done on both sides of the frame - both from the wrong side and from the front.
Make diagonal lines at the corners of the frame. To do this, you need to cut each corner inside your frame.
Fold the fabric over and glue it to the inside. You can also paste over the reverse side of the product with a cloth - here it is optional.
Once completely dry, decorate it with ribbon, lace, or whatever you like.

A blind stretcher is the easiest to manufacture:

For its manufacture, it is necessary to select wooden slats of a universal size. Reiki can be purchased at any store. You will need: wood glue, tape measure, sandpaper for processing, nails, corners.

We measure the rails. Horizontal and perpendicular. The frame size should be slightly smaller than the canvas size.

We make cuts at an angle of 45 ° and process with sandpaper.

We tap the staples with a hammer, drowning them in the frame. On the reverse side of the structure, metal fasteners must be screwed onto the corners.

How to make a baguette for a picture with your own hands

A baguette is a modular structure made of wood or polyurethane foam. Usually machined, fastened with a clamp or hot glue.

If you don't know how to make a baguette frame, watch this video:

Making your own frame for a picture of wood

Wooden picture frames are always in fashion and always look exquisite.

What you need to make a wooden frame with your own hands

There are many variations of wood frames from the simplest.

to more complex ones. For example, from carved wood or skirting boards.

Instructions for making a frame for a picture from a wooden plinth

We apply glue to each saw cut and connect them together. This is where a clamp comes in handy, which will help make the fastening points very strong.

Making your own frame for a picture from a polyurethane ceiling plinth

If you want to see a white frame for a picture on the wall, you can make a baguette from the ceiling. The most important thing is to cut the joints perfectly evenly.

Advice! For gluing, we use Titanium glue for ceiling tiles and skirting boards. From above, the product can be processed with acrylic paints.

How to make a cardboard frame with your own hands

The easiest, fastest, cheapest way to make a picture frame is with cardboard. You can decorate the creation with fabric, pebbles, interesting decorative elements.

1 of 4

Advice! For work, it is best to choose thick cardboard. The ideal way to fasten the elements will be a thermal gun.

An interesting video will tell you how to make a passe-partout for a photo with your own hands.

The following photos and diagrams for creating a passe-partout will help you create the layout correctly.

How to make a frame for a picture from improvised materials with your own hands

Making picture frames with your own hands is not an easy but exciting activity. If you decide on such an exclusive product once, then for sure, you will never forget about your hobby.

Any picture is a story, a spectacular frame can emphasize this story and make it even more vivid.

1 of 7

I decided to somehow try to paint with acrylic (this is the same as oil, only synthetic paint). Pen test was done:

It turned out not very, clumsy, but this is a matter of skill - you draw more, it turns out better. And, in the end, you can already say about yourself that you do not draw, but WRITE pictures. I'm still drawing =).

The main brake in this art is the need to insert pictures into frames. Well, at least for me - it's expensive to buy, it takes a long time to make. So I thought about how cheaply and quickly you can make a frame with your own hands.

A search on the Internet for the request of the frame gave a bunch of pictures with them. Here it dawned on me - what is there to be smart about? After all, you can do without a wooden baguette, sometimes costing a lot of money - after all, our "paintings" have value only at the family level, they are unlikely to be published. And although, as a gift - nothing will happen either - cheap and cheerful.

So, in order to make a frame for a picture, we need:

The picture itself. I drew a geranium but one of the lessons on the Internet on cardboard 10x10 cm with acrylic.
A sheet of photo paper for the printer. The size depends on the size of the frame, in my case - A4 sheet.
Thick cardboard - depends on tastes and preferences, I found it in my waste paper with a thickness of 1.5 mm.
Acrylic paint. I used brown - as neutral to the color of the frame itself - to paint the ends.
A rock elpel, a ruler, glue, brushes, a cutting mat - in general, a standard set of tools for an ordinary homemade craft.

We start by looking for a suitable frame on the Internet, just make sure that the edges are not very ruffled - we still have to cut it out.

I chose the second one. Then we go to CorelDrav, insert a frame into a blank document, draw a square on top of it with the dimensions of the drawn picture. Well, we adjust the frame so that the square goes beyond its edges by 2-3 mm. We print this case on photo paper in good quality. I printed two at once - I'll draw another one later.

We glue it on cardboard, be sure to wait for the glue to dry completely.

Well, actually, we cut it out - with the help of a "piercing" scalpel (my invention - a knob at the end - so that it does not press into the palm), slowly but surely. It took me about 15 minutes. We try on the picture to the frame.