Installing the toilet to the concrete floor. Toilet bowls, how to strengthen: simple efficient methods

For high-quality trim of a bathroom or toilet room, it is necessary to dismantle all foreign elements that are an interference for finishing. It is worth understanding that the dismantling of sanitary devices is obligatory not only on the basis of the convenience, but in order to preserve their integrity. After completion of the repair work, the question arises: how to install the toilet to the tile?

In contact with

Odnoklassniki.

Prepare to the installation of the toilet

Installation of the toilet on ceramic tiles is made by several methods. But for any of them you will need the same installation facilities and materials. To successfully complete the installation procedure, you also need to have some tools:

pencil - used to apply markup;
screwdriver - it is desirable to have a set of screwdrivers;
rubber;
a hammer;
special drills of two types: Designed for drilling glass and concrete;
it is also necessary tool for drilling - simple or impaired - does not matter;
kerner - a tool that are placed the wells for drill;
divorcing wrench.

If you have the necessary tools, then it remains for small - materials:

naturally, the installation object itself is a toilet;
means connecting a sanitary facility with sewage and water supply systems:
- corrugated or fan tube;
- flexible hose or copper tube;
- crane for opening / closing water supply;
any seal, to ensure the tightness of the threaded joints;
sealant;
dowel.

Installing the toilet to the tile can be carried out with a hidden method or open. The difference in the placement of fastening means: inside the base and outside, respectively.

How to fix the toilet open method?

First of all, it is necessary for a pencil to note the place of the future location of the toilet. How to do it? "We" try on the toilet to the intended place, then placing a simple pencil of the place of attachment, as well as we supply the base of the toilet. What errors can be allowed when working with a pencil? The displacement of the markup will affect the actual holes you have done, which threatens not the coincidence with the fastening sinuses.

The next step is removing the toilet from the working plane for several minutes and the holes made by you are drilled.

To install the toilet on the tile will be a little later, and now I will take Kerner to whipped a little tiled glaze tiled glaze on the fastener.

Note!

If this is not done, then the drill will slide along the tile, which will lead to a damage of the floor covering.

Next, in our hands there should be a drill on glass, which can easily overcome a sufficiently massive ceramic tile, though not without the help of a perforator or drill. After the resistance of the tile was suppressed, our drill will be strengthened into an insurmountable structure for it - concrete. Here the drill is included, intended for concrete, which must be drilled hole for the entire length of the acquired dowel.

After cleaning the holes from foreign objects, we pour a sealant into it, which plays the role of isolation from water, and insert.

So it's time to consolidate the toilet to the tile, but before this pass the sealant for pencil labels. What is it for? The sealant is an excellent obstacle to moisture accumulation. After that we install the toilet and fix it with fasteners.

Need to drill tiles carefully

Installation of the toilet closed method

Before starting the installation procedure, it is necessary to make outlets that will be conducted in the sewer, as well as from the water pipeline. Position the holes as close as possible to the plumbing device installed.

All actions are similar to the previous method. All the difference is to secure fasteners. Here they will not rush into the eyes. We ride the toilet onto fasteners and fix bolts through the side openings.

Solution How to fix the toilet to the tile remains for you. But no matter what method you choose, experts advise bolts do not tighten the tight, because it may be necessary to adjust when connecting to sewage and plumbing systems.

The entire excess of the sealant, which came out to be neatly scrupped with a spatula.

In the toilet installed "Warm floor". What to do?

Today, the "warm floor" system is a fairly common phenomenon not only in toilet and bathrooms, but also throughout the house. As you could already understand if such a system takes place, it is impossible to drill tiles. Why? Because the heating system will be damaged and stopped functioning.

But you should not despair - there is a way out. Once it is impossible to drill, you will have to glue. There is only a couple of questions: what and how?

Regardless of the adhesive material, the treatment of the toilet and tile with emery paper is required. Easy hand movements give the light roughness of the lower plane of the plumbing element and a tile. This is a mandatory action, since when they are performed, the best floor contact with the toilet is observed.

Epoxy resin, silicone and liquid nails can be used as an adhesive material.

Hole for fasteners should be small

Adjustment of water supply

Connecting to the water supply is carried out in two ways: closed and open.

The closed method also has greater aesthetics in contrast to the open. In order to connect the toilet to the water supply, we need a flexible hose or copper tube.

Note!

The copper tube usually comes complete with a toilet, but it is characterized by rigidity, which does not make it possible to change the position.

But the flexible hose to that and flexible - you can change the position and not much depend on the position of the device.

The tap pipe requires a special concentration of your attention. If the carving pipe is internal, you will need to provide the system with an additional adapter that should be isolated by the seal to avoid leaks.

The final stage is to check for leaking on all fronts. Opening the tap of the water pipeline, waiting for water in the bar, and, producing a flush, you can detect places through which water seeps. If there are no leaks, then you can stop the bolts that fasten the toilet to the tile.

Let's get to the sewer

When the installation of the toilet to the tile is completed, the stage comes to giving a lifetime - connecting to sewer and plumbing systems. After all, without them, the toilet cannot perform their functions.

To communicate a toilet bowl with sewer, we need corrugations. The corrugation is good because it allows you to change the toilet distance from the outlet, as well as change the angle of inclination. Inside it is a rubberized membrane, which is tightly adjacent, both to the outlet of the toilet bowl and the output of the sewage. Gently connect the toilet to the sewer through.

After the manipulations carried out, you can start the installation, which in turn will be connected to the water supply. Use silicone or plastic washers to eliminate contact bolts with faience toilet bowl.

How to mount the toilet to the tile video:

In contact with

See inaccuracies, incomplete or wrong information? Do you know how to make an article better?

Want to offer photos on the topic?

Please help us make the site better! Leave the message and your contacts in the comments - we will contact you and make a publication better together!

Fastening the toilet to the floor can be made in several ways depending on the design of the bowl base, such as fastening and material itself. By type of fixtures distinguish the installation on:

Installation on the dowel has a different sequence of work depending on the floor material.

Concrete, rough base

The simplest and fastest way to install on a concrete base. Recommended for compact models. At the same time it is necessary to align the base of the cement-sand tie. The slightest skew will affect the quality of the wash.

Installation on concrete has an additional advantage in the fact that a 3 cm thick screed will perform the role of a pillow for the sole of the toilet bowl. The sequence of actions is as follows:

The toilet is applied to the place of future consolidation;
The places of attachment of the dowels are noted;
Holes drill in the overlap and plastic dowels are driven;
The sand-cement mixture, mixed in a 1: 2 ratio, is stacked with a thickness of 4-5 cm;
The product is installed in place and pressed, so that the surplus of the solution appears to be outward, and the bulk mass filled the cavity at the base of the sole.
Screw fastening screws.
You can use only 24 hours after complete rejection of the mixture.

Before installation, you need to carefully position the product. The toilet changes on average once every 10-15 years, so the wrong position can be quite sharp.

Installation on tile

It is practiced when repairs in the bathroom has already been made and all communications are derived out. In this case, it is necessary to focus on the product of the product. The pedestal with oblique release is recommended to be based as follows:

Marking of the place of future holes;
Using the perforator holes are drilled. They should be slightly less than plastic dowels, length is at least 60-70 mm.
A silicone sealant is poured into the hole to improve the clutch;
Silicone is applied to the entire sole of the pedestal. In several places under the sole, wooden or plastic mounting wedges or plates with a thickness of 2-3 mm are put. This is done so that silicone does not squeeze out from under the foundation.
Screws are naked without reaching the end to 2 -3.
A day after the sealant gets dry, wooden wedges are removed and the final tightening of screws is made. Thus, an elastic basis is obtained, which will prevent cracking and chip on the tile.
In the slots that were formed after removing inserts, silicone is mandatory.

So that the tile does not burst during drilling, the surface tension of the glaze layer is cleaned, punching the marked location of the core. 1-2 mm dried in drill mode and only then switches to the perforator mode.

Press with direct vertical runoff is installed in a similar way, only a sealing gum is placed around the wastewater. This unit for the toilet may not be included in the standard package and is purchased separately. Silicone is also applied along the contour.

The inner surface of the outlet of the toilet is recommended to lubricate with dry sealant.

Silicone, which is applied to the floor under the toilet can be replaced with sheet rubber 2-3 mm thick. It is noted along the contour of the sole of the pedestal, but is cut by 1-2 mm less. The resulting between the base and the tile of the slot is smeared with silicone or tile for tiles to the tone of the one that was used for the bathroom. It is done so that there is no black stripes at the base.

Installation on glue

This method of installation is sometimes found if warm floors are made in the bathroom without the calculation of the products being installed. Then the floor can already be drilled, and a durable and reliable fastening is necessary.

The glue is prepared as follows:

Epoxy resin ED-6 is heated to a temperature of 50 ° C;
Solvent is added, and the hut is a hardener;
Constantly stirring, the cement of the brand is not less than M300, until the viscous homogeneous mass is obtained.

The mixture can be used for one and a half hours. Makeup proportions - resin: solvent: hardener: cement - 100: 20: 35: 200.

Before applying the surface of the tile and base base degreases with acetone or another similar substance. The composition is applied to the surface with a smooth layer not exceeding 0.4 cm. For 12-15 hours, it is impossible to use the toilet.

Re-installation on the taffeta

In case of violation of the integrity of the bowl or pedestal of the toilet and the need for its replacement, it may turn out that the basis for which the old product was established is significantly lower than the overall floor level in the bathroom.

In this case, the taffett is fixed. This is a wooden or rubber lining, cut out the contour of the toilet sole with holes for an anchor with a thickness of 5-30 mm depending on the depth of the excavation. In the case of a tree, it is mandatory processed several times with antiseptics and hydrophobic impregnations. You can even soak it with spent machine oil. The floor in the fastening site needs to be thoroughly dissolved.

Side anchor

In some models, the technological holes for attachment are not vertically, and the side of the pedestal at an angle of 90 °. In this case, special side mounts for toilet are provided. However, the order of installation and sealing of joints during their use does not change.

Mortgage to fit the toilet to the floor

Fastening the toilet to the floor, various methods depending on the type of base and the design of the pedestal. Use anchors, glue and substrates.

Mounting toilet to the floor

In this article we will tell you about the popular ways to fasten the toilet to the floor. Immediately it is worth saying that we will not describe the technology of concreting toilet bowl, it gradually goes into the past. Now the toilet is installed directly on the tile and it is important to deal with the methods of its attachment.

Dismantling works

First of all, it is necessary to make dismantling work to remove the old device. All this work should not take a long time. First of all, the faucet is overlapped on the water supply to the tank. After that, a nut on the hose is unscrewed. Water merges from the tank. Next dismantled on the tank on the tank.

After that, disassembly of fasteners on the toilet itself is carried out. Usually it is anchors shrewd to the floor. If you have another old toilet, then it can be cemented. In this case, you need to carefully smash the screed and completely remove the old toilet.

If there are no plans or he already flows, it is possible to break the toilet itself in this case, the dismantling will be lightweight. But remember, it is acceptable if it is concreted!

In the process of dismantling, be sure to follow the safety technique so that the fragments do not damage unprotected parts of the body. Plus to everything, it is necessary to gently remove the toilet from the sewer nozzle. If it is damaged, the installation process may be difficult.

Preparation of the foundation

After a complete dismantling, the base preparation should be prepared for installation of the toilet. The amount of work will depend completely on the quality of the floor. If it lies a tile and you do not plan to replace it, it is enough just to make sure that it holds reliably. If you delete the old tile and carry a new one, then you should not hurry to install the toilet.

If the old device is concreted and a pit formed in the floor after its withdrawal, then it must be completely cleaned and cement. It is important to pay attention to the output of the sewer tube. It must be holistic to eliminate the likelihood of wastewater leakage. If you have cast iron pipes, then directly plan the replacement of the pipe on the plastic.

Tools

To secure the toilet tool with your own hands. Most home masters he is. In particular, you may need:

This is the main set of tool. Its equipment can change slightly, based on the installation method.

Instructions for the toilet bowl - 3 ways

So, we suggest you familiarize yourself with three ways to fasten the toilet:

Although the technology is different, the task remains the same - securely consolidate the toilet to the floor, so that during its operation it has not fallen.

With the help of dowels

If you have a smooth floor, then this method is the most common. But here the perfectly smooth floor of the tile is important. If a small drop will come to the location of the attachment, the toilet can split.

So that this does not happen, under the toilet, you can put a rubber lining or a piece of old linoleum. To cut it, you need to put the toilet to material, cover the contour with a marker and after cutting the specified form.

After that, markup is carried out directly on the floor. In most cases, two mounts on the toilet bowls. The markup process is carried out like this:

Put the toilet to the estimated place.
Drove its outline on the floor.
Put the marks on the ground where the mounting hole will be drilled.
Remove the device and impose a sealant to the floor, with which the selected and cut lining will be glued.

While the sealant is frozen, you can begin to make the hole. The mounting quality will largely depend on the correctness of the selected drill diameter. It must fully correspond to a dowel dimer. You can drill through the gasket.

In the prepared hole, you must score a plastic dowel. After that, we set the toilet to the place and fix it with the help of a dowel. The device should be perfectly attracted, but moderate, otherwise the ear on the mount can break.

For simplified installation, usually dowels for fastening are equipped with a special plastic gasket, which eliminates the likelihood of possible chip.

At the next stage, the toilet toilet is connected to the sewage, tank mounting and water connection. When installing the tank, a rubber seal is used. For a greater likelihood, it can be missed with silicone or other sealant. This will increase the quality of the docking and prevent the leakage of water during the drain.

At the end of all work, the place of the joint of the toilet and tiles on the floor is recommended to be treated with silicone sealant. This will exclude the flow of water and the accumulation of dampness.

You can fix the toilet on the glue. This is especially necessary when there is a warm floor technology. As an adhesive composition, there may be different materials, such as epoxy glue, silicone and other sealant.

With the presence of epoxy glue, its use is allowed only if the floors are sufficiently smooth. The work process is as follows:

At first, the surface of the floor must be carefully cleaned from all sorts of contaminants. There should also be no moisture that hurts good adhesion.
In order for the quality of the adhesion to be high, floor tiles can be made rough with a rigid brush.
Next degreases the surface with acetone or another solvent.
If glue is ready, it must be applied to the bottom of the toilet sole, the thickness of the layer to 4 mm.
After brings the device to the sewer opening, joking and simultaneously install it in its place.
After putting the toilet to the floor, it must be segged and left for half a day to clarify the glue.
Only when the glue is dry, you can connect a tank and water supply.

That's all the technology of gluing the toilet to the floor.

If you have a wooden floor, then this method of fastening the toilet bowl is the most suitable. Under the taffeta implies a special laying of wood.

Wood thickness should be around 300 mm. To prevent the rotting of this mortgage part, it should be mandatory to be treated with oil and other anti-corrosion compositions. The essence of this technology is as follows:

On the cooked timber, you feed the nails so that they look out from the taffeta by 30 mm.
Next prepared a notch in the screed in the size of the taffeta.
Pour the hole with a solution.
Apply the workpiece to the solution side where the nails stick out.
As a result, it should be on the same level with the floor.
It is necessary to give time so that the solution completely grabbed and fastened.
After 12 hours, the toilet can be consolidated with self-samples directly into the wooden mortgage.

After that, the standard procedure for connecting the barrel is carried out. Additionally, it is possible to miss the place of docking the toilet bowl with taffeta silicone. This will eliminate the likelihood that moisture will fall under the sole and accumulate.

So, we looked at the two most common technologies of how to properly install the toilet to the tile. Also additionally we learned how to be if you have a wooden floor. As can be seen, there are no particularly complex processes. One of the main tasks is to choose the right fasteners.

Although in most cases it comes complete with a purchased device. We hope that this material will help you independently deal with all the details of the installation and fastening of the toilet.

Fastening the toilet to the floor is easy to make it yourself

Without a toilet, no residential premises can do without a toilet. To establish it correctly there are several simple ways. About this in our material.

How to fix the toilet to the floor: 3 methods of installation of the toilet

The installation of any plumbing equipment must be carried out with regard to certain construction rules and norms. For most people, it seems too difficult to carry out such an operation. This is played by firms that offer their installation services of various plumbers for quite large money.

Although the installation of the toilet is one of the simplest operations. For its correct conduct, you need to know some subtleties of the process. In this article, we will talk about how to properly consolidate the toilet to the floor, so as not to be watched by several methods.

Regardless of how you decide to use to install the toilet, all work should be started with the assembly of the drain tank. The drain mechanism is collected according to the instruction attached to the toilet, after which it must be installed in a certain place.

The preparatory stage also includes the arrangement of the water supply and sewer highway. As mentioned above, there is not one way of fixing plumbing. Its choice directly depends on the material to be finished.

This is the most common installation method. With it, you can mount plumbing pretty quickly and without more effort. Best of all, this method is suitable for smooth surfaces, so if the question arose how to fix the toilet on the tiled floor, then read carefully.

The method is suitable for smooth and smooth surfaces, since even the minimum difference in height will significantly reduce the quality of installation. It should also be said that the dowels are better to install lightweight model of toilet bowls, since the attachments may not withstand the considerable weight of the product.

Specialists in this area recommend putting the toilet to a special gasket, which can be made independently from the leaf of old linoleum, also for such purposes. Rubber is perfect. For the manufacture of the gasket, it is necessary to put a product on a sheet of material, after which it is necessary to circle its leg with a marker, handle or pencil. After that, you should cut the laying on the markup.

You can use a stationery knife or scissors. Plumbing equipment is placed on the floor and securely secured by the dowels or fasteners. Fasteners, in most cases, are included with the toilet, but if you have a friend's situation, you can purchase them in any specialty store.

After making the gasket, the floor surface should be placed. To do this, you need to put the toilet in the intended installation location and circling it in the contour, then the sealant should be applied, without leaving the contour. It is better not to rearrange and apply a small consuming layer.

On top of the sealant you need to install a gasket that should be adopted after drying the sealant. This design is distinguished by strength and reliability, although in some cases it is permissible to install the toilet without gasket.

Now you need to take up holes.

To facilitate all future installation works, it is necessary to approach this operation with full responsibility. The gasket must be glued firmly and accurately into the place of installation of the product, and the resulting holes must minimally differ from the drill in the diameter plan.

This is necessary in order to then use the fasteners correctly, and the reliable rubber gasket will become a buffer zone between the floor covering and the toilet.

In some cases, it may not be necessary to install the plumbing equipment, but also a change in its height of several centimeters. Such a need appears in the case of the premises of several units of this equipment, the last of which should be lift into 4 centimeters.

For these purposes, a wooden board is used to arrange a stand. It must be made in the same way as the gasket of rubber or linoleum, after that "plant" a wooden product for sealant, apply a layer of sealant to it and above the resulting design to put a gasket. If everything is done exactly in size to the legs of the toilet, then a reliable design will be.

Holes for fastening elements must be drilled directly in the laying or stand. It is important to remember that tightening the fasteners on the installed toilet must be very neat. It is impossible to hurry here and overdo it, because it is possible to significantly damage the surface of the legs of the toilet.

Large metal dowels or special elements for the installation of plumbing are used as fasteners. Special elements are very often supplied with a toilet. It should be immediately said that the quality of the contact of the legs with the floor is the same when using any of the listed options.

In the operating hole in the laying, you need to insert a dowel and stick them. After that, it is necessary to mount plumbing equipment and consolidate it with the help of fasteners. Remember the power of tightening that should not be excessive.

Now you need to connect plumbing equipment to the sewage line. Special attention should be paid to the corrugated pipe. Its sides must be smeared with silicone composition. One of them needs to be connected to the highway, and the second to the outlet of the rear toilet bowl.

The area of \u200b\u200bcontact of the corrugated pipe with a product and a highway must be carefully treated with a silicone-based composition. In some cases, additionally use with a tape with a metal coating. The last step in the installation of the toilet will be connected to the water line. Here you only need to firmly fasten the hose to the pipe. After that, the device can be used instantly.

Method number 2: Glue installation

If you do not know how to fix the toilet to the tile without drilling and bolts, then the following information, for sure, will be interesting to you. This method is very simple and does not require a qualification or a rich experience from a worker, but here you need to be patient here, since the method is very expensive.

For complete drying of epoxy glue, which is used for the installation of plumbing, it takes about 14 hours. This method is also used in the case of a smooth and smooth surface, since the difference in height does not allow to create a durable contact of the product with floorpad. Like the first method, this is used mainly for tile.

The method is very simple performed. First you need to carefully clean the area of \u200b\u200bcontact from dust and pollution. Tile tile is also better to handle emery to increase the adhesion of the material. After that, you need to degrease the surface of the contact by means of acetone or any other solvent.

Now you need to proceed to the manufacture of glue. In principle, there is a possibility of acquiring ready-made adhesive composition, but if the budget is small, it is better to save and do everything yourself. For preparation, 100 parts of the ED-6 epoxy resin, 35 parts of the hardener, 20 parts of the solvent and 200 parts of the cement are required. At this stage, it is very important to comply with the correct proportions.

The epoxy resin must be heating up to 50 degrees Celsius, after which the solvent pour into it, the following ingredient is a hardener, after it it was necessary to add cement to the mixture. During the preparation of the composition, it is necessary to constantly stir it. As a result, a plastic and homogeneous mass should be formed. To enhance the effect, you should pre-lubricate the contact area by glue, and then apply an epoxy solution.

The composition, which operated under the pressure of the device being installed, must be instantly wipe off with a damp cloth. If the composition was prepared according to the rules, it can be used for no more than one and a half hours, because it is then grabbing and loses plasticity. The solution must be applied to the floor of the toilet in such a way that the layer of composition amounted to 4 millimeters, and the area on which the composition was applied was at least 25 square centimeters.

Now it is necessary to install the toilet to the desired location and connect the corrugated pipe to the sewer system. As in the past case, the silicone composition should be used to seal the contact area of \u200b\u200bthe corrugated pipe. Then it is necessary to apply force and press the product to the floor as close as possible, then leave it alone at 14 o'clock.

Connect to sewage

Throughout the period, it is not recommended to even touch the device, since it is possible to shift it from the place, and you have to repeat everything first. At the end of this period, you only need to connect the product to the water line, and you can begin to use it. Now you know how to secure the toilet to the tile.

In most cases, this method is used when it is required to mount the toilet on a wooden base. The taffeta is a gasket made of durable varieties of wood to which plumbing equipment will be installed. The thickness of the board from which the gasket is manufactured must be 3 centimeters. It is cut out of the tree in the same way as in the two previous cases. After that, the gasket must be impregnated with oil in order to increase its protection against moisture.

Installation on taffeta

For a more durable contact, it is necessary to mount anchors with the rear side of the gasket. As practice shows, it is best to drive several nails in a checker order. Nails must be approximately 3 centimeters. Before fixing the toilet to the wooden floor, it is necessary to pour a niche to install it with concrete, after which it is necessary to put the prepared gasket into it, which you need to drown in the solution so that it does not perform above its level.

Then you need to give a solution to dry, wait about 12 hours. The product is attached to the laying by screwing. Under the fasteners it is necessary to put rubber washers. This is done in order to exclude the possibility of damage to the surface of the toilet during tightening the fasteners. According to the opinion of the professionals in this area, it is better to handle fasteners with graphite or tavot so that, if you need to remove them, I have not had to make extra effort.

Also, instead of a tree, it is permissible to use rubber, the thickness of which should be 1.5 centimeters.

In conclusion, it should be added that if you are not confident in your abilities, it is better to trust specialists. So you will spend more money, but you will be sure about the installation of plumbing equipment.

How to fix the toilet to the floor: the most common mounting methods

How to fix the toilet to the floor: 3 ways to install the toilet bowl. Step-by-step instructions for the installation of plumbing equipment and recommendations of specialists.

Fastening the toilet to the floor: analysis of the 3rd "correct" technological methods

Installation of plumbing equipment is carried out in strict accordance with the construction rules and norms. Homemade masters, often feel fear of such work. This uses service companies that request very decent money for fulfilling enough simple operations. Meanwhile, the molding of the toilet to the floor is quite affordable for independent execution of the event. It is important only to carefully read the existing technologies of work, choose the most appropriate, and accurately follow all instructions.

Regardless of the selected method of fastening the toilet bowl, the installation work starts from the assembly of the drain tank. The device is collected according to the instructions and is fixed on the place intended for it. Also, before installing the toilet, it should be prepared nodes of the supply and displacement of water. There are several methods for fastening devices. The main selection criterion is the floor material to which the equipment will be installed. Let us consider in detail the most common ways.

Method number 1: Installation on a dowel

The most practical method allows you to install a device with the lowest costs of strength and time. Optimal for use on a smooth smooth base, since the slightest height differences adversely affect the quality of the flush. It is preferable to use this method of fastening for lightweight compact structures, since fixation may not be completely reliable. Plumbers advise to install equipment on a special gasket, which can be easily made independently from old linoleum or thin rubber sheet. The toilet is installed on the workpiece, it will be burned over the contour with a marker. After that, there is a sharp knife or simply scissors, the laying of the desired form is cut.

The device is fixed to the floor with a dowel or special plumbing fasteners. Fasteners usually comes complete with new equipment. It can also be purchased in specialized stores.

Now you need to mark up. On the device prepared for the equipment "try on" the toilet and supply it along the contour. Remove the device. We assign a thin layer of sealant and glue the gasket on it. This design will be the most reliable, although some masters prefer to do without a substrate. You can proceed to drowning holes under the fasteners. As practice shows, if you highlight the laying and select the diameter of the boosa so that the holes under fasteners are a little more, then the further installation will be much easier. This is due to the fact that the rubber substrate acts as a peculiar "contact spot" for the floor and device.

It happens that it is required not to just fix to the floor toilet, but also a little lift it. This is relevant if several devices are located in the apartment. Then the latter in the system should be lifted by about 3-4 cm. In this case, a segment of a two-link board is used, which is used as a stand. It is cut exactly along the contour of the toilet bowl and stacked on the floor, a rubber substrate lies on top of it. All this is bonded by sealant and forms a reliable and solid construction. Holes for fastening drills directly on the laying.

Tightening the mount on the base of the toilet is very neat. With an excessive force you can damage the ceramics from which the device is made

Long metal dowels or special plumbing fasteners can be used as secrets. The latter usually come complete with new equipment. The quality of consolidation is approximately the same, so you can use both options. We score to the dowels prepared in the floor. Install the toilet and gently screw it. It must be remembered that with overly strong tightening ceramics from which the device is manufactured may be damaged.

Method number 2: Glue installation

Of all the methods, how to fix the toilet to the floor, this simplest, but at the same time and the most costly time. To clarify the epoxy mixture, which is used as glue, is about 12-15 hours. This method can only be used on a smooth surface. Most often it is used to fix the equipment on the floor tile. The method is very simple in performance. First, both bonded surfaces need to be well cleaned from dust and garbage. Outdoor tile can be cleaned to make a sharpening. This will improve the adhesion of the material. Surfaces are degreased by any solvent or acetone.

Preparing glue. You can buy a ready-made epoxy composition or prepare it yourself. To do this, take 100 parts of the ED-6 epoxy resin, 200 parts of cement, 20 parts of the solvent or plasticizer and 35 parts of the hardener. The sequence of adding components into the solution is important. At first, the resin is heated to 50s, the solvent is added to it, after the hardener and at the very end - cement. The composition must be constantly interfered to form a plastic, homogeneous mass.

In order for the toilet to be reliably fixed in place, the flooring is prepared: cleaned for better adhesion and lubricate the glue with a small layer. Excess the composition, speaking under the weight of the equipment, immediately remove the wet rag

Properly prepared adhesive mixture can be used for one and a half hours. We apply it to the bottom of the toilet so that the solution covers the area at least 20 square meters. cm, and the layer thickness ranged at least 4 mm. The prepared equipment is set to the desired location, combining sewage sewage with the release, and with an effort we press it to the floor. After that, we leave the device for at least 12 hours. This period is necessary for harvesting the adhesive composition. During this time, it is not recommended to even touch the toilet. Then connect the equipment to the water supply and sewage.

Method # 3: Taffett mount

Most often, this method is used to install the toilet bowls on the wooden floor. Taffeta is called a strip of durable wood, to which the equipment is attached. The thickness of the board, from which the element corresponds to the form of the supporting rack of the toilet is cut, should be 28-32 mm. To protect the item from dampness, it is necessarily thoroughly treated with oil. For reliable fastening to the floor, the anchor mounts the anchor. The easiest option is the nails robbed in checked order, which should perform from the part by 2-3 cm. The excavation prepared for the installation of the toilet is poured by cement mortar. In the anchors, the taffet is treated down anchors. As a result, it should be flush with a floor.

After about 12 hours, during which the solution finally dries, you can start the equipment. The device is fixed with screws. Under their heads, the washers-gaskets made of rubber, which will prevent the possible damage to the toilet bed when tightening. Experts advise before working to lubricate the screws with tavot or graphite, so that they can be easily unscrewed if necessary. Taftie from wood can be replaced with a substrate from rubber. It is cut out of a sheet material with a thickness of 5 to 15 mm, perhaps even from an old rubber rug. Such a substrate must be 1-2 cm less than the reference to the toilet.

Fastening the toilet to the taffeta involves the use of a special wooden insert. The diagram presents all elements of such mounting.

Methods for fastening the standard toilet to the floor are diverse. They differ significantly in difficulties and time that is spent on the installation work. It is important to choose the fastener method correctly. It depends on the material from which the floor is made indoors. Installation work can be carried out independently, but if there is no experience or desire, it is better to turn to professionals. They will quickly and competently hold all the work, guaranteeing a long and impeccable service of new equipment.

Proper toilet bowl to the floor: 3 ways to fix the toilet bowl on the floor

Competent molding of the toilet to the floor can be performed independently. Consider the technology of fixing equipment in three most common ways.

In the new apartment or in the old, the trim of the bathroom is often produced when plumbing devices are or not yet, or they are dismantled in order to replace new ones. In an empty room, naturally, it is easier to lay the tile on the walls and the floor, since nothing bothers.

In addition, standing plumbing devices - bath, toilet, washbasin sink can be simply damaged in the production of finishing works. If the laying of the tile on the floor is performed when you stand the toilet, then imagine how difficult it is to cut a ceramic floor tile, which is much thicker wall to repeat the toilet configuration.

And how to install the toilet to the tile, we will try to tell in our article.

In order to correctly put the toilet to the tile and connect it to the sewer and water supply system, the following tools and materials will be required:

toilet;
fan tube or corrugation;
flexible hose, inserted cold water to the toilet;
ball valve for a cold pipeline;
sealing material for winding threaded compounds;
silicone sealant;

drills for concrete and ceramic tiles.

From the tools you need to stock:

drill or perforator;
by a divorce wrench;
multiple screwdrivers;
rubber spatula;
pencil;
hammer;
kern.

Installing the toilet on the tile is made in different ways, depending on the type of toilet bowl.

There is a closed fastening and open. With the open type of attachment, the mounting bolts are located on the protruding part of the toilet bowl. The closed fastening system is inside the base of the toilet.

Freshloins in the open way

This method requires minimal effort and less time, but loses to the second method (closed) on aesthetics.

The toilet is established in the estimated location of constant location and pencil on the tiled tiles are made in holes intended for fastening.

It is important that at the same time the pencil is strictly vertically, otherwise the notification of the mark can lead to what you drill holes that do not fit under the fastening bolts.

In addition to the marks for the fastener, it is necessary to circle the outline of the bowl of the toilet on the tile.

After that, the toilet is moved to the side and the holes are drilled in the places of pencil marks:

First, the core scratches the glaze on the tile so that the drill does not slide along the tile.
The first is the drill on the glass for the passage through the tile.
After a drill or a perforator, the drill on concrete is inserted and the opening of the desired depth is drilled, depending on the size of the purchased dowels.

The finished hole should be cleaned of dust and filled with silicone sealant, which in this case plays the role of waterproofing, preventing moisture from entering the reasons. Dowels are inserted into the drilled holes filled with sealant.

Before installing the toilet to the tile, For the previously defined contour, the toilet is applied a strip of sealant, which will not allow water to penetrate the base of the toilet.

The mounting elements are inserted into the mounting holes - bolts, sleeves or screws and twist up to the desired position. The mounting places are closed with plugs to impart aesthetic form to the toilet and to protect the fastening bolts from moisture.

An extra silicone who will inevitably protrude under the severity of the toilet to be removed with the help of a rubber spatula or other remedies.

Installation of toilet with internal mount

Before conspiring the toilet to the tile, you need to pre-make the outlet holes to connect it to the sewage system and to the tap pipe.

Holes should be located in the maximum proximity to the toilet plane.

Similarly, as when installing a toilet bowl with an open fastening, on the flooring tile of the floor, the outline of the base of the toilet is detected, and the labels of the mounting holes in the toilet to the floor are transferred.

The hidden mount is placed on the floor, and marks are made to drill holes, which are drilled similarly to the previous method. The mount is mounted on the floor, and fixes rigid bolts. After that, the toilet is installed with emptiness on the mount and through the side openings is fixed with bolts with an installed fastening.

But there are situations when the floor can not be drilled, as the heap system is mounted under the tile.

In this case, the question arises than to glue the toilet to the cafél. You can use:

liquid nails
silicone glue
epoxy resin with hardener.

In all cases, the preparation of the tile and the lower plane of the toilet is required. The tile and toilet are processed by sandpaper to give roughness for better adhesion adhesion with floor and toilet surfaces.

Connecting toilet to sewer system

Corrugated plastic tube is used to connect the toilet bowl to sewage.

Corrugation allows you to change:

distance from the toilet itself to the entrance to the sewer riser,
the angle of inclination depending on where the output is located - in the wall or in the floor.

Having inside the rubber membrane, the corrugation is not glued to the output of the toilet, it is tightly and hermetically combined with the release of the toilet, it is by means of a membrane. In the sewer riser, the corrugation is also inserted without using glue, by means of a special rim, which does not allow penetrating the inside of the room with unpleasant odors and drained.

After the toilet is connected to the sewage system, you need to mount the toilet tank to start connecting cold water.

It is necessary to put washers from plastic or silicone on metal bolts to prevent them from contact with faience toilet bowl.

Connect to water supply

Toilets have a different connection system for a plumbing pipe:

external connection
closed connection.

Despite the different ways of connection, all joints should be sealed and not allow leaks.

With a hidden connection system, a copper tube or a flexible plumbing hose, made of various materials, can be used. If the copper tube comes with a toilet, then the flexible eyeliner will have to be purchased separately.

Special attention requires a tap tube toilet tank. It can be both outdoor and internal thread. If the thread is internal, then it will be necessary to deliver an additional adapter and use the sealing winding.

After the connection is manufactured, the operation of the drain tank and the possibility of leaks is checked. If everything works fine, the mounting bolts are tightened until the toilet lid is set.

It is not as difficult as it may seem at first glance, but you need to have certain skills and knowledge. To deal with the toilet device, the principle of action of the drain tank, assembling installation is not all. After all, it is also important to qualitatively fulfill the toilet bowl to the floor. From this article you will learn what methods do it today.

What are the toilets?

To begin with, before telling about the methods of fastening, you will get acquainted with the varieties of this plumbing device. To classify the toilets can according to the following characteristics:

weight and dimensions;
the material from which they are made;
release direction;
tank type, bowls.

If we talk about the materials that are used for manufacture, then it can be attributed to:

faience. This is a fragile, but inexpensive material, the service life of which is approximately 15 years;
steel. It is reliable and strong, the toilets from it are ideal for public places;
acrylic reinforced. It is distinguished by durability, low weight, strength, but negatively responds to the effects of high temperatures;
porcelain. More durable, more beautiful and durable than faience, but it is more expensive.

As for the design of the bowl and, then the type of toilet bowls classified by this characteristic, you can find the table below.

Table. Types of toilet bowls from a constructive point of view.

Name, photo	Short description	Pros and cons
	The device is installed using a metal frame that is attached to the wall. The tank is located in the frame, while the bowl is located outside. After installation, the frame is closed with a false wall (plasterboard, as a rule).	Benefits include compactness and attractiveness. But there are weaknesses - it is necessary to spend a lot of time / strength to install such a toilet, and when repairing a tank without disassembling the false walls can not do.
	Here the bowl with a tank is a single part, and therefore do not need to be connected to each other.	The advantages of the design include reliability (there are no compounds through which leaks could begin), as well as convenience of maintenance. The minus is only one, and it consists in the fact that if one item (bowl or tank) is damaged, then you need to change the entire toilet bowl.
	This is the most popular toilet version - he has a tank is installed behind the bowl and is located at the wall.	As for the advantages, they can include ease of operation / maintenance, as well as a small noise level during washing. Minus is a weaker fluid pressure during operation.
	Also an extremely popular option, then only among outdated models. The distance between the bowl and the Bach is large, the first, as a rule, is under the ceiling.	The main advantage is a good water pressure. Another highly located tank will not "steal" the useful area of \u200b\u200bthe room, which is already minimal. Cons - Water is very noise during the wash, and if the repair is needed to get to the tank not easy.

Now consider how it is the toilet that can be attached to the floor:

dowels;
, closed false wall;
using sealant / glue;
on the taffeta;
cement (the most "hard" method).

Below we will talk more than two methods of attachment of the plumbing device - dowels and with glue.

Method NO1. Fixation on a dowel

The use of dowels and bolts is a fairly popular way to fix the toilet. The method is simple and practical, but not devoid of flaws. First of all, the tile will have to drill. It is necessary to do it carefully and carefully, because the flooring can spoil the slightest error. In addition, the use of dowels is designed for light products, and therefore it is better to use the adhesive method to fix a heavy model.

To fix the dowels, you should prepare everything you need:

roulette;
ammonia;
pencil or marker to perform marking;
napkin or cloth (preferably from microfiber);
electric drill;
drill to her (exclusively on concrete).

It may be less likely to take a small piece of linoleum, sealant with an adhesive gun. Well, everything is necessary at hand, therefore we can proceed directly to the workflow.

Step 1. First, the toilet is trying on, it is pre-installed where it will stand. It is estimated to be the convenience of using it, the ability to connect to plumbing and sewage systems. You can also shake the bowl - it will help determine the flattering floor under the toilet.

On a note! If the product is risen, then a piece of linoleum is put before fastening under it, pre-cut in the form of support. As an option - you can process the connection of the connection with silicone sealant. Occasionally, the problem is not in the irregularities of the floor, but in the very toilet. If so, then you need to align the support, clean it with "sandpaper".

Step 3. The product is removed, at the scheduled points there are already large cross marks.

Step 4. Holes in the tile are drilled in the tile. It is important to work extremely neatly, in order not to damage the tile, and also that the tool worked on small revolutions.

Step 6. The tile is cleaned of dirt and dust (and after drilling this "good" will be enough). Then the surface is degreased by ammonia alcohol.

Step 7. Now it is required in the holes that were previously done, insert a dowel.

Step 8. Bolts are checked for that, whether they are logged in a dowel. You can replace the fasteners to others if the coming in the kit have dubious quality.

Step 9. The toilet is set. Holes in the tile must coincide with similar in the support.

Step 10. If there are no problems, the bolts are inserted into the dowel, and it's not worth forget about the washers from rubber or plastic. Bolts are delayed, but carefully, otherwise there will be a risk of damaging the bowl. After that, the hats are hidden by special plastic linings. All, the toilet is successfully fixed to the floor on the dowel!

Method NO2. How to fix the toilet to glue

This method is almost as popular as the previous one. For fixing in this case, special construction glue is used (it can be bought in a specialized store) or a mixture prepared with its own epoxy hands. In addition, the toilets are often fixed by a simple silicone sealant.

On a note! The method using glue is popular, since it has important advantages. Read them.

Reliability. Folding the device fixed with glue / sealant will not be accurate.
No dirt, dust. Consequently, after completion, it is not necessary to clean up.
Easy installation. For work, you do not need to have some serious knowledge or experience. It is only necessary to be able to work with a glue gun.
Safety. Stopping the toilet on glue, you do not risk damaging his bowl.

Do not forget that for this method it is necessary for some patience - so that glue is completely dry, it will take 12-24 hours (it means that it is impossible to use toilet to the toilet).

To secure the plumbing device, prepare everything you need, namely:

roulette;
silicone-based sealant or glue;
corolnic;
ammonia;
marker;
sandpaper;
spatula (need narrow);
a pulverizer filled with soap solution;
rag.

Installation of toilet: A - Preparation of the installation site; b - preparation of the foundation; B - the deception of the bottom of the bottom of the toilet; g - installation of the toilet; d - install the tank; e - grinding the crop; Well - attach the tank to the water supply network; s - adjustment of the water level in the tank; and - fully established toilet

After preparing all the necessary act in accordance with the Step-by-Step Guide.

Step 1. The toilet is trying on - put on a pre-sublated cardboard, in order not to damage the floor covering. The convenience of the device is checked, how best to connect it to sewage / water supply.

Step 2. The product is centered, for which you can take a roulette or corner. It is denoted by the distance to the walls on the right and left.

Step 3. Cardboard is extracted from under the toilet. The device is aligned relative to the walls of the room, which will require, as in the paragraph above, the roulette or corner.

Remember! When aligning, you need to position the tank as soon as possible as possible in a specific situation. Holes by which the tank will connect to the bowl must be coaxial.

Step 4. That part of the bowl, which will come into contact with the floor, will be burned along the contour with a marker.

Step 5. The edge of the support is extinguished by sandpaper or knife. It should turn out perfectly smooth - so the adhesion with glue will be the maximum.

On a note! Sometimes the plot of tiles to which the support will be installed, you also need to process the skin. But it is necessary to work carefully and not go beyond the markup, otherwise you can spoil the tile.

Step 6. Where the toilet will be installed, the tile is treated with the ammonia for degreasing. Then dryly wipes the microfiber cloth.

Step 7. Sealant or glue is applied to the edge of the support. It is important to correctly calculate the amount of adhesive composition correctly, because if it is too much, then you can drink a tile, and if not enough, then the mounting of the toilet to the floor will be fragile.

Step 8. Toilet bowls are closed in the toilet and is neatly put in place, which was noted at the beginning of the process. It is better to do with the assistant, so as not to stain the tile with glue and do not install the product crooked.

Step 9. The floor around the support is sprinkled with soapy water. Due to this, the surplus sealant, which will have to trim, will not stick to the tile.

Step 10. The spatula is wetted in the soap solution and is used to remove the remnants of the adhesive composition.

Step 11. After some time - on average, 12-24 hours - glue either another composition used for fixing the toilet can dry. It is impossible to use the product or move it during this time.

Step 12. Now, after complete drying of the glue, work can be continued. It connects to the sewer network, is installed and connected to the water supply tank, the seat with the lid is installed and so on.

Interesting! Previously, we have already said that glue, suitable for fixing the toilet, can be made with your own hands. Take the epoxy resin (it will take 20 parts), heat it up to +50 degrees, add 7 parts of the hardener and another 4-solvent. After mixing all components, you need to add another 40 parts of the cement. After re-mixing, a homogeneous mixture should be obtained, which you need to use as soon as possible (after one and a half or two hours later it will begin to solve and lose its original properties).

Video - Nuances Mounting Toiletz Silicone

Are there any other fixation fixation?

In addition to those methods that are described above, there are others. But they mean less popular for various reasons.

Previously enjoyed great popularity stitching concrete: Delivered in the right place, the product was put there and put it off the lower part of it with cement mortar. Therefore, the toilets enshrined in this way are often found in old apartment buildings. The method is quite reliable, and performed is relatively simple.

However, concrete tinning has several serious drawbacks. First of all, the joke and the floor in the installation site look unattractive. Another minus of the method is that to dismantle the toilet without damage will not work. Simply put, when dismantling the product will have to be broken, and therefore today the method is no longer relevant.

Another outdated method is the use of taffeta. Who does not know whether it is a substrate from a tree with a height of about 5 cm, which is installed in a recess with cement mortar. From the bottom on the taffette there are many anchors or nails, thanks to which the substrate is attached in solution. The toilet is placed on top of the taffeta and is fixed with screws.

On a note! When using your taffeta, remember that the moisture is high in the bathroom, and therefore the substrate should be treated with varnish or olphus, so that it did not die and served longer.

The latter today by the method, albeit not related to the floor is suspended mounting. A metal frame is built next to the wall (there must be complete with a plumbing device). A bowl is fixed to it. What is characteristic, this frame, like the tank, is closed by a false wall made of tiles or. As a result, we will get an attractive and durable mount. But the method requires considerable monetary and time costs.

On a note! Choosing a particular toilet bowl method, take into account your capabilities and preferences. Be that as it may, if you come to the point with the mind and correctly perform installation, then the toilet will stand tightly on the place of place and will serve for many years!

Video - Overview of the installation process of the toilet with detailed instructions and installation tips

Modern technologies for the manufacture of sanitary devices allow you to fill the building materials market with a variety of unitasis models.

Sanitary devices are varying by modifications of drain tanks, manufacturing material (porcelain, faience), a mounting device, the location of water supply and drain release. In most cases, bathrooms and toilet rooms are discharged with tiles.

The cafeter covers the walls and floors. How to fix the toilet floor on the tile floor to stood firmly on its basis? In this article we will give the reader information on how best to do this.

Preparatory work before installing the toilet

Get the most convenient toilet pipe length

The drain sink is installed when the works on the facing of the walls and the floor with ceramic tiles are completed.

If you install the plumber first, and then proceed to the flooring device from ceramics, you will have to do a rather complex cutting in the stoves for the base of the base of the pudestation of the plumbing device.

This will cause the risk of damping damage with the unsuccessful selection of carved tiles.

When lining the walls and floor with ceramic tiles, it is necessary to achieve a convenient length of the protrusion from the wall of the tap pipe.

The release of the tap pipe should be so that you can install a locking crane.

The sewer plums can perform both from the wall and from the floor. The sewage sewage must provide a hermetic connection with the corrugation.

Required tools and materials

To successfully execute the task, you should be patient and prepare the following set of tools:

perforator, drill;
marker;
dried on glass and ceramics;
dumping;
sealant;
spanners;
key adjustable and cape heads with a gate;
dowel with self-drawing;
passatia;
corrugated pipe;
crane;
kern;
grinding with abrasive circle;
connecting hose.

Article on the topic: Electrician style interior. Stylish furniture and soft fabrics.

Installation of toilet on tiled floor

Installation of toiletza

The installation of the toilet to the tiled floor makes in different ways, depending on the position of the mounting holes in the shell pedestal.

There are three options for fastening a plumbing device to ceramic flooring:

Installation toilet bowl with vertical mount

Most models of drain sinks are made with mounting holes for vertical fasteners. Installation of the sink is carried out in several stages:

Before mounting the toilet, the horizontal of the installation site is checked. If no deviations are detected, then the base of the base of the pedestal and the tile of the rinking of the sink is not made.

Side fixation toilet bowl

Installing the toilet with side mounting holes is somewhat different from the mounting of the sink with vertical fasteners.

The difference lies in the fact that the installation details are hidden under the instrument pedestal.

Install such an instrument model as follows:

Gluing the base of the toilet bowl

To such a method of installation, it is resorted if the base of the floor is equipped with a heating system. There is a risk of damage to the heating equipment when drilling the seating holes. See in this video for more details:

In this case, stripping the foundation of the pedestal and the surface of the ceramic tile on the structure of the support of the toilet bowl is obligatory. This is done to increase the adhesion of glued surfaces.

Tight press the toilet to the floor

Glue to the toilet on the tiled surface with liquid nails. The surfaces are covered with glue, then they are pressed to each other.

The toilet is removed from the place of installation and put it. Withstand the time specified in the instructions. Then they set the sink into the place, pressed it to the floor.

The rest of the installation work is performed in the same way as in the previous cases.

Bring out the installation of the toilet bowl on the tiled floor on their own only in the presence of skills and experience in this form of work.