Do-it-yourself lamp made of timber. Handmade wooden lamps photo

Practicality score
Material preparation
What lamps to use

Original interior items made of wood bring comfort and coziness to the atmosphere. If you don’t surprise anyone with solid wood furniture, carvings on the shelves, then a floor lamp, chandelier or sconce made of branches or driftwood will definitely attract the attention of guests.

However, wooden products are not cheap, especially original ones. We offer to save money and create a lighting fixture with your own hands. In addition, this is a great way to implement bold ideas, while spending very little time. For the manufacture of lamps and sconces, you will need standard carpentry tools.

Practicality score

To understand how good a wooden lamp is, let's weigh the pros and cons of this unusual piece of decor.

Advantages:

The environmental friendliness of wood is an important advantage over polymers and other synthetic materials.
When heated and in its normal state, the tree emits aromatic substances from the resin - ether, which relaxes and heals.
Any forms are created from wood materials - the raw materials can be easily processed with carpentry tools.
An unusual option for interior decoration. Wooden chandeliers in homes and offices are rare.

Disadvantages:

Disadvantages are reduced by using different impregnations and appropriate timber preparation. Therefore, a wooden lamp can be called a useful accessory that will emphasize the style of the room and give it charm.

Material preparation

Lamps and sconces are made from any wood materials. Boards, branches, snags, plywood are used - the choice is determined by the idea. Nevertheless, no matter what the design for the lamp is made of, it is important to properly prepare the lumber:

The wood must be dry.
The blanks should be treated with complex impregnations with refractory and insecticidal, antiseptic components.
It is worth choosing solid lumber without traces of decay.

In addition to wood, lampshades, carpentry tools and glue (preferably epoxy) are prepared for the manufacture of lampshades.

What lamps to use

Since wood is a flammable material, you need to be careful with the choice of light source. It is better not to use an incandescent lamp for nightlights and lampshades - when burning, it heats up both the cartridge and the wood.

LED lamps and ribbons are suitable for such homemade products - they emit white light and do not heat surfaces, they are fireproof. Diode tapes are ideally combined with wood of any color and texture.

Master class: lamps from boards

There are countless ideas for making home lamps. We will tell you how to make a homemade chandelier - you can take it as a basis for creativity.

For manufacturing, you will need beams of any section, for example, 100 × 100 mm or less, depending on the desired dimensions of the finished product, as well as a mirror. We recommend that you make a drawing of the chandelier in advance, which will reflect the lengths of the sides and the area of \u200b\u200bthe mirror part (it must protrude beyond the inner perimeter in order to rely on the beams).

We make a blank from 4 bars of the same length.
Next, we form a “castle” - we cut out a rectangular cup for half the thickness. A cup cutter or jigsaw will help with this.
We assemble the structure and glue the parts together.
After that, we paint.
From the upper edge we stretch the wiring with a cartridge and fix it to the inside with brackets or small nails.
Attach a mirror on top. It will act as a reflector of light. We fix on the corners.
It remains to attach a suspension, for example, a chain.

The accessory is ready.

The video shows a version of the manufacture of such a lighting item, the principle of operation is the same:

More plank lighting ideas:

Lamps built into false beams. To make them, we connect 3 boards in a U-shape, wires and cartridges will hide in the resulting niche.

The wheel will create the effect of antiquity or a hunting lodge, a forest bungalow. We fix the electrician on the upper side of the wheel facing the ceiling.

Another interesting solution from the boards, see the video

Master class: lampshades and lamps made of plywood

Plywood is a lightweight material that can be easily processed. From it you can create a variety of products. For example, an unusual night lamp for a children's room or hall. It will look equally good on the terrace of a country house and in a city apartment.

Or like this:

For a night lamp made of plywood in the form of a house, take a universal scheme on which you can make any pattern!

Now let's start making:

We transfer the templates prepared for all 4 sides onto a plywood sheet of any thickness.
We send it for cutting under an electric jigsaw (or a laser machine for the finest study of petals and small fragments). You can use manual, but with a complex pattern you will have to tinker.
Sand the cut edges with sandpaper.
Roofing works are carried out in the same way. We cut it to size, make a pattern and grind it.
We glue the workpieces together. In order for thin sheets to hold securely with each other, inside the house in the corners we install bars on which we glue the walls.
We start the cartridge and fix it on the desired side of the interior. The wire can be brought into the pattern or a separate hole can be made for it.
We fix the roof, we make the bottom. We glue all the details also on the corner bars.
We make a suspension or mount in a convenient way.

The house is ready. A homemade night light or chandelier can be simple with a simple ornament or designer with a complex idea, wall or table. We present a video master class on making a house from several sections.

A plywood lamp can be of any kind. The main thing in working with this material is the need to cut holes for the passage of light. More photos of nightlights and lampshades:

To assemble such a lampshade from plywood, you need to cut a groove lock on each blank. Then the connection of parts can be carried out without glue.

A wooden chandelier diffuses light throughout the room. Connection of details is carried out by decorative self-tapping screws.

Master class: lamps and chandeliers from branches

Branches are the most accessible material for creativity. You can collect them at any time in the park or in the square near the house and immediately start creating. The difference between branches and other wooden blanks is that they do not need to be dried. As long as they have moisture in them, they can be bent into different shapes. Over time, they will dry out and no longer straighten out.

Before harvesting twigs, you need to decide on the design of the lampshade or chandelier. Will it be weaving or tying thick sticks with a rope, will wood be combined with other products - forging, metal frames, etc. Here are some interesting ideas:

A master class will help to make such an accessory for the interior:

Generalized instructions for creating a ceiling lamp from branches:

It is easy to make a lampshade from branches; special skills are not required for this, as well as tools.

Master class: log lamp

An ordinary log and even a snag can act as a blank for a chandelier. The main thing is that the material is dried and neutralized from insects and microflora.

We give the workpiece the desired size.
In the places where the cartridges are inserted, we make holes of the same diameter as the hidden part of the electrical device.
We attach hangers.
Insert electrical.

The master class can be viewed in the video:

An unusually shaped snag or stick can be turned into a masterpiece by adding a simple lampshade to it:

Chandelier bottles

Combined lamps look non-standard, for example, a wooden base and glass bottles as shades.

Glass scatters light and creates shades of different colors. To make such a plafond is simple:

In a wooden shield we form holes for bottles. The neck should fit tightly, so we select the diameter as accurately as possible.
We attach a suspension to the top of the boards. Chains look original, for which the structure can be hung from the ceiling.
Preparing bottles. In order for them to give off light, the bottom must be removed. This can be done by heating the glass with boiling water, then quickly transfer the bottle under a stream of cold water.
We insert the bottles into the holes in the board, we stretch the electrician through the neck.

The video shows the process of creating an interesting table lamp.

Original design lamps made of wood. Homemade lamps made of wood photo.

If you like to do everything with your own hands, we recommend to your attention a selection of the most original wooden lamps made by designers. But to make such lamps it is not at all necessary to be a designer, just look at these photos, show a little imagination and you will succeed.

Wood is a unique material that has been used for home improvement since the time of our ancestors, wood has positive energy, it is an absolutely environmentally friendly material. In this article we will consider the most original options for making lamps made of wood.

Ceiling lamps made of wood.

Original pendant chandeliers made of wood.

Homemade chandelier flower garden.

Chandelier ball, made of rope. To make such a chandelier, an inflated balloon is used, which is wrapped with a rope, then the rope is covered with glue, when the glue dries, the balloon is blown off and the result is such a design from which you can make a pendant lamp.

Pallet lamp. The wooden pallet is sawn into pieces that are used to make lamps.

original solution.

Lamp made from ordinary kitchen graters.

Woven lamps. Here, a basket is woven from a thin vine and hung from the ceiling.

Table lamps made of wood.

Night light made of wood.

To create a comfortable and cozy atmosphere in a residential area, it is necessary to organize high-quality and technically competent lighting using different devices.

For lovers of original solutions, we recommend that you pay attention to wooden lamps that you can make yourself. Recently, such products can be found in various cafes, catering establishments, museum and art galleries, and other public places.

Features and practicality of wooden lamps

Natural wood is characterized by high aesthetic properties. This is an excellent raw material that will allow skilled craftsmen to realize the most daring fantasies. Nevertheless, against the background of numerous advantages, the possibility of using wooden products is limited by some of their shortcomings.

First about the benefits:

Easy to operate.
Environmental Safety. Even when exposed to high temperatures, no toxic substances are released. The use of natural wood can have a positive effect on a person with chronic respiratory diseases. This is especially true when using products made from coniferous trees.
Wood is considered a malleable material from which various works of art can be created. The versatility of this raw material allows it to be used for the manufacture of products of various configurations and shapes that will fit into any interiors.
Natural wood can be used in conjunction with plastic, metal or glass.

disadvantages

Despite the many advantages, the tree has several disadvantages:

This is one of the most flammable materials, so it is not recommended to use it in rooms with fire sources - fireplaces, burners, etc. To increase fire safety, wood is covered with special protective agents that prevent burning and ignition.
Without a protective coating, the wood will remain sensitive to sudden changes in temperature and high levels of humidity. This imposes other restrictions on wooden lamps associated with operation in bathrooms and kitchens.
Wood is a habitat for a variety of small pests, including termites and bed bugs. To protect against them, it must also be covered with protective equipment.

It is important to know! Immunity to temperature changes explains the fact that conventional filament lamps cannot be used in wooden lamps. Ideally, these should be LED products, less often - fluorescent or halogen lamps.

Styles and forms used

Any lighting device, regardless of the material of manufacture, according to the method of installation and use, can be divided into three main categories:

suspension;
point;
ceiling.

Pendant lights are considered more common as vintage and retro styles are making a comeback in recent years. A wooden ceiling chandelier is suitable for use in spacious rooms and living rooms, while spotlights will look perfect in small spaces with low ceilings.

The main style directions when creating the interior of a room and lamps:

Oriental theme implies the use of natural wood or solid wood that does not contain secondary impurities. Designers try to observe clear geometric shapes, straight lines, decorating appliances with patterns characteristic of oriental culture.
Products in the style of "country" look as simple as possible, and sometimes rude. But with proper operation and choosing the right interior, the lamps look profitable, increase comfort and create a spirit of unity with nature.
Retro. It is possible to manufacture extravagant lighting fixtures that were used in the old days.
Modern - modern lamps, in which they try to combine wooden and forged elements, including lattices and patterned designs.
The chalet implies the use of only natural wood; according to the idea, the products should enhance unity with nature.
The classic style can be attributed to a minor retro branch. Luminaires are characterized by smooth lines and graceful forms. In the manufacturing process, wood and stained glass are used.

Wooden lighting fixtures can belong not only to different styles, but also be made in one form or another. The most popular of them:

In recent years, the wheel lamp has been gaining popularity among connoisseurs of antique interiors. It is mounted under the ceiling on beautiful chains or rails using special candles (light bulbs that resemble these products in shape). Light sources are often used in luxurious castles and antique-styled restaurants. Provides uniform illumination throughout the space.
Large beam with candles. For its production, they take an ordinary log of a solid shape, which is suspended from the ceiling on a chain. The device will be a wonderful element of decor in living rooms, bedrooms and dining rooms, but in the kitchen and other small-sized rooms, the lamp will look too bulky.
Hanging chandelier made of boards tied with ropes. Usually made in conjunction with matte shades, made in a simple design. It can be supplemented with various decorative elements - everything is limited only by the author's imagination.
A tree root lamp is an unusual option, which is made using dry tree roots and ropes. These lighting devices can be used in conjunction with a wooden lining, but it is important to take into account a small nuance: the operation of light sources with a minimum operating temperature is required, since they are in close proximity to the wooden walls of the product.
A timber beam with several pots or lamps. The original solution for the ceiling chandelier.
Children's lamps shaped like animals, stars, balls, vehicles, etc.

Varieties of lamps

The variety of wooden lamps is not limited to the models listed above. The main limiting factor in their creation is the imagination of the author. A few simple and most obvious solutions that can be taken as a basis for the manufacture of these lighting fixtures:

A floor high lamp can be created from wooden slats. Usually the product is installed in the center of the room or in some prominent place.
Wooden case made of thin sheets of pressed veneer, having a non-standard shape.
A small wall lamp made from sawn timber.
Floor lamp from an old pallet. A simple yet extraordinary product. For its production, you can take a glass jar and a sawn pallet.
U-shaped lamp made of wooden slats, which can be decorated with a variety of woven materials.
From small parts of wooden pallets you can create small table lamps.
A wooden box can become a frame for a chandelier, under which several matte shades are hidden.
You can take an ordinary wooden snag, treat it with protective materials and embed neon light sources. The result is a beautiful table lamp.
Lamps are also made from small stumps, which are usually not processed. The result is an attractive, romantic option.
Old tin can, two small boards. And nothing else is needed to create an unusual, simple and functional device!
A wooden snag can serve as a candlestick for a lamp imitating a candle.
Thin pressed sheets can be used to create a chandelier whose shades resemble flower buds.

DIY designer lamps

We offer you options for the independent manufacture of various wooden lamps, from the preparation of materials to step-by-step instructions.

Preparation of the necessary materials

Wooden lamps can be made from a variety of raw materials: parts of a tree (rhizome, stump, branches, snags), processed wood (boards, plywood sheets, veneer), etc. The final choice depends on what idea you decide to bring to life. On the other hand, it is important to properly process and prepare any material for use:

dry the wood well;
impregnate with special substances that increase fire resistance and protection against insects, mold;
when choosing a material, carefully inspect it and make sure that there is no decay;
in the process of creating a lampshade, use original cartridges, glue the parts with epoxy.

What lamps to use

Wood is a flammable material, which makes it possible to use certain light sources. It is strictly forbidden to use lamps with a filament, because when glowing, it releases a huge amount of heat, heating not only the cartridge, but also the wood.

On a note! Ideally, LED lamps and strips should be used, most of which emit a “cold” white glow and practically do not heat up the frame of the product. To date, they are the safest elements from a fire point of view.

Master class: lamps from boards

For the production of such a chandelier, you can take several bars of square section (up to 100x100 mm). Specific dimensions depend on how large the final product should be. Apart from them. a mirror is useful. It is recommended to start any work with a sketch of the future chandelier. Be sure to include actual dimensions.

The further process looks like this:

Stock up on four bars of the same size.
Form a castle on the edge of each of them. On one side there should be an empty rectangular cavity, on the other - a convex central part that will go into such a cavity. To do this, you need a jigsaw with a wood file.
Assemble the structure together, be sure to glue the parts together. Paint the desired color over the frame.
Moving from above, pass the cable and install the cartridge on it. Fix the last element on the inside of the frame using special brackets.
At the top, install a mirror part that will reflect the rays of light in the right direction.
Build a chain hanger.

Master class: lampshades and lamps made of plywood

Plywood is considered one of the most convenient and easy-to-use wood materials, for the processing of which you do not need to have special skills. A plywood lamp can be installed almost everywhere - from the terrace of a country house to different rooms of the apartment.

Take a sheet of plywood in your hands and draw a layout of the future product on it, not only indicating the desired dimensions, but also setting them actually on the sheet. The result should be a three-dimensional lamp, so you need to make blanks for all four sides.

Step-by-step instruction:

Transfer the templates for all sides to plywood of the desired thickness, indicating the actual dimensions of the future device.
Cut out these shapes with a jigsaw. You can use a manual or automatic type tool. If the shape of the lamp is complex, then a laser machine is indispensable.
Sand all edges on the cut with sandpaper.
Do the same with the materials that will be used as roofing. Observe the dimensions, do not forget to sand the edges.
Then you need to glue all the blanks, making sure that the thin sheets are close to each other and securely fastened. Place the bars to which the walls will be glued.
Place a cartridge inside the product and secure it. Be sure to make a hole through which the wire will be output.
Attach the bottom and top pieces. All these elements must be glued to the same corner bars.
It remains to create a suspension or mount for wall mounting.

Master class: lamps and chandeliers from branches

Branches can be found almost everywhere, so they are rightfully considered the most affordable material for creating unusual wooden lamps. Go to the nearest park or square, collect a few branches and get to work.

Important! Unlike other wooden blanks, branches do not need to be dried. The presence of moisture in them causes flexibility and the ability to create unusual shapes. Over time, they will dry themselves, so that the lighting fixture will retain its final shape.

The lampshade can be made in different ways: weaving or tying thick branches with ropes. Wood can be combined with other materials, including metal frames, forged elements.

Install a cartridge inside the lampshade or secure the LED strip using soft wire. If you wish, you can paint the wooden frame in the desired color.

Master class: log lamp

In the manufacture of such a lighting device, you can use a log or driftwood. First you need to dry the lumber and apply a protective coating that prevents insects and mold. Create a blank of the desired shape and dimensions. Make special holes for the cartridge, fix the hangers and place the electrical wiring inside. On a log, you can install several shades or lampshades made from glass or cans.

If you want to save yourself the trouble, then go to lighting stores and buy ready-made wooden lamps. Now you know their advantages and disadvantages, so it will not be difficult for you to verify the quality of the proposed product, to ensure its correct and competent operation. When making devices yourself, give free rein to your imagination, but do not forget about the simple rules of fire and electrical safety.

In contrast to the rapid progress of technology, more and more people are turning to the origins when arranging their homes. Natural materials, simplicity of lines - become relevant again. As you know, lamps carry an important mission, as if they set the general background in the interior. Original chandeliers, sconces or floor lamps made of wood will ideally fit into rooms decorated in eco-style. The beauty is that you can make them yourself, with an eye to the features of your room.
Consider vivid examples of wood crafts, depending on the type of base used.

Finished base

Lamps created on the basis of finished wood products look great. Everything that your imagination allows will be used: from a cart wheel, an old barrel, to the steering wheel of a ship purchased at a flea market.
Surely, many have seen massive wooden chandeliers made of wheels in atmospheric establishments. Equipped with candle-shaped bulbs, they look like aliens from the Middle Ages. Why not make such a lamp with your own hands?

Wheel chandelier

You will need: a base wheel (you can find it in large building supermarkets), a dozen light bulbs imitating burning candles, mounting chains and a ceiling overlay to hide the wires. Decorate it with forged details to your taste.

Can't find a wheel? It doesn't matter, with the help of ordinary wooden clothespins you can make funny "plafonds". Even a teenager can handle this job.

Plafond from clothespins

And another masterpiece of wooden clothespins - attach clothespins in tiers to the metal mesh. Such a ceiling can be made in an hour by connecting a child - both informative and useful for business. Complete it with an original candlestick, and a romantic atmosphere in the house is guaranteed.

Clothespin candlestick

And all you need for it is a tin can and a couple of dozen clothespins, you don’t even need to glue anything.

But what a miracle can be made from ordinary wooden hangers. Drill a hole under the hook, thread onto the pin and fasten tightly by fanning them out.

Plafond of trempils

Even an old dry barrel will come in handy - just take it out through one of the side boards. It turns out a great lantern for evening gatherings under the stars.

Barrel lamp

wooden balls

The most popular do-it-yourself lamps are often spherical in shape. So, in fact, from the waste you can make an original branch ball-plafond.
The same technique is used here as when creating thread balls. To do this, wrap a regular-shaped inflatable ball with a film, attach small pieces of sticks with a thermal gun (10-12 cm - based on the size of the ball, the smaller it is, the shorter the sticks are.)

Ball-shaped ceiling

Done, you can enjoy the exclusive ceiling. If desired, open it with paint, varnish or silver from a spray can.

In the same way, you can randomly wrap fresh willow twigs (or sprouts of young bamboo) around a round (square or cylindrical) base. True, it will take longer to stand the finished lamp for the branches to dry properly.

Willow ceiling

Truly magnificent lamps-balls are obtained from branches of medium thickness, cut into rounds. Drill a hole in the center in each, do not make it too small - the light transmission of the "plafond" will depend on this. And glue them according to the algorithm described above.

Plafond from branches

Take branches of different diameters to fill the surface of the base as tightly as possible when gluing.
Such an original lamp will decorate a country house even in the daytime. Definitely worth spending a few hours to create it.

Country plafonds

A spectacular chandelier can be made from thin slices of wood and slices of bark - the most difficult thing is to make a neat cut. Connect them one by one, considering that the tiers should be of different sizes and arranged in descending order, imitating a cone.

Chandelier bump

Found a lush rhizome - excellent. This is a ready-made lamp for the bedroom - you just need to paint it to match the existing interior.

Rootstock chandelier

And in the evening your room turns into forest thickets - so realistic chiaroscuro.

We attach snags

Amazing lamps are obtained from ordinary snags. Of course, they can be ennobled by sanding and varnishing, the main thing is to choose a “plot” more interesting.

driftwood lamp

Complement the block with a modern spotlight on a thin “leg” - you get a clearly designer thing, and you can’t say that it was all done by yourself

Polished and lacquered knotted koryaks, coupled with a laconic lampshade made of paper (fabric or bamboo straw), look very stylish.

Driftwood lamps

naughty twigs

Looks great lamp, created from the vine. Lovely mustache curls add playfulness and charm to the product. And there is no need to injure the plants - use the branches left after the next autumn pruning.

Vine lamp

Unusual chandeliers can be built from straight segments, although they look a little ominous, they allow you to maintain an eco-style in a country house.

Vine chandeliers

Moreover, it is not at all necessary to adhere to a certain geometry. Both the mentioned branch ball and the “whisk” dotted with LEDs will look great.

Geometry of fixtures

And here's how to decorate boring rectangular table lamps. This option is good not only for summer cottages, but also brings an atmosphere of natural warmth and comfort to the apartment.

Decoration for lamps

Such a lampshade is easy to make with your own hands. Paste a wooden or metal frame with pressed paper, attach a cartridge with a lamp inside. As a finish, use branches of different sizes - no one will definitely have this.

We use the "gifts of the forests"

Street light

And here is the not-so-difficult option. Punch a hole in the trunk of a dead tree in the area, and insert a kerosene stove or a solar-powered LED lamp inside. Original, simple and soulful! Such a street lamp is well protected from bad weather and warms the soul on long winter evenings, shining from under the snow cap.

By the way, there is another plus - you do not have to suffer with uprooting the hemp.

Very unusual shades are obtained from birch bark, cover it with a finished lampshade made of thick paper or fabric. Only use such a lamp with caution.

Plafond from the bark

Since the bark can quickly dry out, crack and even ignite from strong heat, safety is paramount. It is preferable to install fluorescent or LED lamps - they heat up much less than conventional ones, and they consume energy significantly more economically.

Or you can just cut a birch log, drill holes (not through holes - to match the size of the base), screw a few light bulbs in a row and attach them above the dining area or desktop.

Birch lamp

During the New Year holidays, ceiling lamps decorated with cones will be appropriate. Equip them with small, barely visible LEDs and the lamp will shine, spreading intricate patterns of chiaroscuro on the walls, which will further emphasize the festive atmosphere.

Plafonds with cones

Bring the cones with white paint to create the effect of frost, you can crush them with salt crystals on top.

Cutting boards

A wonderful lamp comes out of scraps of boards for shelves - nail them to the base - ends in a circle. The main thing is to properly fit them in size and carefully grind the sections so that there are no burrs.

Plank lamp

You can slightly reduce the thickness of the boards closer to the center so that more light comes out.

If you are "on you" with figured wood cutting - try to recreate something similar. From diamond-shaped notches-cuts, form simple geometric patterns - this way the craft will look neater. These wonderful shades are appropriate in any interior - as a chandelier, wall lamp or floor lamp.

Curly cutting

Or you can just put an ordinary candle inside and set it on the table, turning off all the rest of the light in the room. We are sure that the household will appreciate such work!

At their summer cottage, such a lamp-hanger will be good. This versatile craft can also be used as a street lamp in the gazebo, and you can hang frequently used items nearby (kettle, keys, towel, etc.)

Lamp with hanger

And all you need is to put together curly cut boards in random order, varnish or stain, and attach metal plates, hooks, a light bulb holder or a kerosene stove. This is easy to do with your own hands, even without, as such, the experience of carpentry.

Security

And finally, a little about security. Given that the tree burns well, you should not use incandescent lamps in products made from it. Overheating and a small spark are enough to make the chandelier blaze like a fire under the ceiling. Therefore, use LED bulbs - they do not heat up at all even with prolonged use. Use non-flammable and non-toxic materials to process products.
Since wood is a natural material, and is an excellent environment for the development of mold fungus and pests, it is imperative that you treat the street lamp with fungicides (antiseptics, insecticides). Due to the fact that such a lamp is outdoors, you should not be afraid of harmful fumes. LED strip - what you need to know when choosing Overview and installation of ceiling LED panels, advantages and disadvantages How to quickly make a homemade lamp from a glass jar?

All photos from the article

Over the past few decades, there has been practically no design trend left that would not use wood products to one degree or another. The lamp in general and the chandelier in particular are objectively one of the most noticeable interior items, so hanging chandeliers made of wood are deservedly considered perhaps the most popular trend at the moment.

Features of ceiling lamps made of wood

Any wooden object in the interior of the room on a subconscious level is associated with warmth and comfort. Traditionally, home-made wooden chandeliers are used in all areas of oriental themes, where the geometric correctness of the lines and at the same time the warmth of natural wood contribute to a peaceful rest.

Such a direction as country is generally impossible without the use of natural materials. The rural style at all times was characterized by the use of slightly rough unusual forms. The massive appearance of such lamps creates a feeling of reliability.

Antique wooden chandelier is associated with medieval romance and knightly tournaments. Inclusions of forged metal elements give this design an exquisite lightness and unique flavor.

Advantages of wooden lamps

The first thing that catches your eye is the naturalness of such a chandelier.. It is difficult to find a more environmentally friendly material. Moreover, being constantly near a heat source, wood releases essential oils and microelements that are beneficial for health into the atmosphere.
The processing technology of this material, as a rule, is not very complex.. The assembly of relatively simple wooden structures is available even to children.

Chandeliers for summer cottages made of wood are deservedly considered perhaps the best solution.. After all, the cottage itself is designed for a country holiday closer to nature.
Not the last role is played by the price of the structure.. Even if you use, the total cost of a homemade chandelier will be affordable for almost any budget. But as a rule, all costs end with the purchase of cartridges, light bulbs and wires, and a few boards or twigs can always be found in any country house.

What are the disadvantages of such lamps

Opponents will immediately point out to you the fire hazard of such a chandelier. There is certainly some truth in these statements, but with proper installation and the use of LED or other slightly heated light sources, you are practically in no danger. In addition, on sale there are a lot of natural impregnations that prevent ignition.

Important: such home-made lamps, no matter how you impregnate them and no matter how competently you collect them, it is highly undesirable to place them near sources of open fire. For example, next to the fireplace or in the barbecue area.

Like it or not, wood is a living material and very hygroscopic. Wooden chandeliers for a bath look great, but it is better to mount them away from showers and steam rooms. Constant changes in temperature and high humidity are far from conducive to the preservation of the massif. In this case, a chandelier under a tree is more suitable.
Another serious problem of this material is the high probability of damage to the array by various pests. But as mentioned above, no one bothers you to impregnate your chandelier with natural protective compounds.

A few words about self-assembly

Do-it-yourself antique chandelier made of wood, the thing is quite real. In essence, all you need is a great desire and a standard set of carpentry tools, which is in almost every home.