The best ideas on how to make a Christmas wreath with your own hands: step-by-step photos, videos. DIY wreath on the door for the New Year

Hello everyone! We continue the theme of decorating our home on the eve of the New Year holiday. And today I want to invite you to try making a homemade accessory - a wreath. This is a very bright product that will attract the attention of every guest and create a truly festive atmosphere.

And it’s so easy and simple to do, it doesn’t take much time, and any available materials and decorative means are used. The most important thing here is to learn how to make a frame, that is, the basis for a New Year's wreath.

You can buy a frame, for example, use a foam mold or hoop, or make it yourself from paper, cardboard, wire or fabric. The following accessories are well suited for decoration: tinsel, rain, fabric, pine cones, spruce branches, newspaper and postcard clippings, ribbons, etc.

Also remember that this element is most often used to decorate doors, so do not forget about the method of fastening the products.

It is now fashionable to replace the usual round wreaths with unusual shapes, such as stars and hearts. Therefore, think about the shape for your product in advance. Be sure to keep an eye on what accessories to choose to decorate such a craft. After all, the decoration should complement your entire interior.

Hurry up and start reading today’s issue and then you will learn in detail about how and what you can use to make wreaths for the New Year and Christmas.

In addition to doors, wreaths can be hung on walls and shelves.

Now I’ll tell you how you can make such an accessory using thick cardboard and tinsel, as well as Christmas balls.

I also want to say that in such products, decorative elements must be combined by color so that they do not contradict each other, but, on the contrary, complement each other.

You will need:

tinsel in three shades;
thick cardboard;
Christmas tree decorations and other decorations;
scotch;
scissors;
cord.

Manufacturing process:

1. Cut a donut of the desired size from thick cardboard. Next, place Christmas tree decorations and other decorations on it in the order you like.

2. Now secure them with tape.

4. Wrap the entire product in a circle with secured tinsel.

5. Then wrap the craft in the same way with tinsel of a different color.

6. And for the third time, wrap the wreath with tinsel of a different color. You can use thinner tinsel as a last resort. And don’t forget to secure the ends of the tinsel.

After you learn how to make a frame from cardboard, I suggest complicating the work a little and try making a base from newspaper and fabric.

You will need:

newspapers;
kitchen napkins;
green organza (if necessary);
PVA glue or hot glue;
tinsel;
decorations.

Manufacturing process:

1. Twist a tube from sheets of newspaper and make a ring. Wrap it with a few more sheets to make it strong. The ends of the newspaper can be glued together with glue.

2. Now wrap the resulting ring with white paper napkins.

4. Afterwards, attach the tip of the tinsel to the base and wrap it around the entire ring in a circle. Reattach the tip.

And now options for finished works using tinsel.

Christmas wreath made of fir branches and pine cones for the door

I really love it when natural materials are used in crafts, especially pine cones and spruce branches. Firstly, such works always look natural and chic, and secondly, the pine smell from such products lingers throughout the house.

So let's now try to make a wreath using pine cones and twigs. And we will learn how to make the base from a foam base and fabric.

You will need:

base form made of papier mache or polystyrene foam (or cardboard donut);
decorative wide ribbon;
decorative branches with beads;
spruce branches with cones;
large artificial flower (poinsettia - “Christmas star”);
pins, scissors;
hot glue gun.

Manufacturing process:

1. Take the base and secure the decorative ribbon on the back side with a pin. Wrap the base tightly.

2. Once you have completely hidden the base, secure the tape with a pin on the inside.

3. Now prepare the elements for decoration.

4. First, secure the branches with beads.

5. And then fir branches with cones.

6. Glue a flower on top of the branches.

Or another way to make a wire base.

You will need:

wire;
fir branches;
strong black rope;
New Year's toys.

Manufacturing process:

First, make a round frame of the required size from wire. Then form lush bunches of spruce branches, and tie them at the base with black thread. Then secure the prepared bundles to the frame. Next, decorate your creation using toys, bows, and ribbons. Tie a loop.

And here is a detailed master class on making a New Year's wreath from a purchased frame.

You will need:

ready-made or home-made frame (you can use a wooden hoop);
string or twine;
cones;
all kinds of decorations;
glue gun, scissors.

Manufacturing process:

1. Take spruce branches and begin to attach them to the frame away from you on the right side. Secure the branches with a rope, tying them into three knots. In this case, do not cut the thread, but wrap it through the frame and secure all other branches in the same way.

2. And at the very end, tie the rope into a knot and secure it with hot glue. Make a loop.

3. Now lay out the decorations and determine their place on the product. Glue the decor. All is ready!

And I suggest you look at the photo samples.

Master class on making a wreath from balloons

And now an interesting way to create accessories from Christmas balls. Let's take a circle of foam as a basis. You can make a frame from the options already considered.

You will need:

foam base;
Christmas balls;
beads;
ribbon;
spray paints;
glue gun

Manufacturing process:

1. Take a foam base and cover it with gray paint. Dry the product.

2. Now glue small balls inside according to size.

3. And on the outside, on the contrary, it is larger.

Balls can be used not only in different sizes and colors, but also in different textures (matte, glossy, shiny).

Another creative idea. Maybe you can use it.

You will need:

wire;
wide ribbon;
factory made Christmas balls;
glue gun

Manufacturing process:

Make a round frame from metal wire. Then string Christmas tree balls onto the wire, while initially gluing them to the metal loops. Decorate the finished craft with ribbon.

This time I’m not posting samples of finished decorations, since they are all identical.

Making a wreath for the New Year from paper

And ahead of us is another way to create products from ordinary paper. Such creativity will also be interesting for children, so be sure to involve them in the process.

By the way, we will make a bagel from newspaper tubes.

You will need:

newspapers;
PVA glue;
scissors;
tassels;
acrylic paint (white);
scrapbooking paper, colored or wrapping paper;
pictures on thick sheets (from old postcards, packaging, boxes);
various other decorations.

Manufacturing process:

1. Roll newspaper sheets into thin tubes. Glue the ends of the newspaper with PVA glue. The number of newspaper tubes will depend on the thickness of your product.

2. Now take any round object and wrap it in tubes in several layers. Lubricate all tubes with glue. When you have laid out all the tubes, grease the entire structure with PVA glue and let it dry well.

3. After drying, remove the workpiece from the round object and paint the base with white paint.

5. Place them on the product and then glue them.

6. Additionally, the craft can be decorated with sparkles or beads.

Now I’ll tell you and show you how to make such beauty from cardboard.

You will need:

colored paper, colored cardboard or patterned paper;
cardboard (for the base);
stapler;
scissors.

Manufacturing process:

1. Take white cardboard. Trace a round object on it. Cut out the circle.

2. Then inside, circle a round object, but with a smaller diameter.

3. Cut out the middle.

4. Cut out petal-shaped parts from colored cardboard.

5. Curl each petal at the base.

6. Start gluing the petals to the cardboard base.

7. Glue the parts close to each other, forming a branch.

8. Cover the entire base in this manner.

9. Finally, glue a ribbon loop.

As you can see, everything is very easy and simple. Any more ideas? Then catch it!

You can use a regular paper plate as the basis for this craft. Cut out the inner circle and decorate.

How to sew a New Year's wreath from felt + patterns

In addition to the usual and familiar options, you can and should also use felt and fabric. In this case, you can also sew the donut base from fabric and fill it with padding polyester. Or use frames made of twigs, paper and other materials, but still sew the decorations themselves.

I liked the following option. I'm sharing with you.

You will need:

foam base;
fluffy green threads;
ordinary sewing threads;
glue gun;
felt of different colors;
scissors;
patterned fabric of different colors;
fabric chalk;
cardboard stencils of figures: heart, snowman, Christmas tree, bell, etc.;
padding polyester;
elements for decoration: ribbons, buttons.

Manufacturing process:

1. Take the base, fix the fluffy thread and carefully, without flashing, wrap it around the workpiece around the entire circle.

2. Secure the end of the thread with glue, and push the fibers up.

3. Trace a larger heart onto the felt using a stencil and cut it out (2 pieces).

4. Trace a smaller heart on the fabric and cut it out too (1 piece).

5. Now attach the small fabric heart to the large felt heart and carefully sew it on.

6. Connect the pieces of the big heart and start stitching them together. Then fill with padding polyester and sew the blanks until the end.

8. Glue all the stitched figures to the fluffy base.

9. Also tie bows from satin ribbons and decorate the craft with them.

Or choose from the following works.

And of course, diagrams, templates and patterns for needlework.

DIY New Year's wreath from a hanger. Step-by-step instruction

You will need:

thick wire hanger;
sweets (lollipops or jellies);
braid;
scissors;
Double-sided tape.

Manufacturing process:

Unbend the hanger and form it into a circle. You have a strong frame, and the “eye” is a mount for a hanging product. Secure the braid to the frame with tape and tie the candies with it one by one. The candy should completely cover the entire wire. Decorate the finished product with ribbon.

You can also attach small scissors to the wreath so that everyone can cut off the candy and eat it.

But the beauty of the balloons. You can also use tinsel and sewn figures.

Video selection about what wreaths you can make at home from scrap materials

And finally, try making a sweet craft like this. I think this decoration would be perfect for decorating a child's room.

You will need:

corrugated cardboard;
two round objects of different diameters;
pencil;
scissors;
glue;
acrylic paint;
bandage;
double sided tape;
foam;
candies in shiny wrappers.

Manufacturing process:

1. Take cardboard and trace a round object of larger diameter on it. Cut it out.

2. Then draw a small circle inside the large one. You can also use a compass. Cut out the middle.

3. Make exactly the same base (repeat steps 1 and 2). Glue the two parts together.

5. Then cut the foam rubber into pieces and cover the finished frame with them.

6. Now wrap the base tightly with a bandage.

8. And then cover the entire frame with candies.

9. Finally, fill the empty spaces with tinsel or beads. Secure them with glue.

And, as promised, a selection of interesting and most creative ideas for your creativity.

Now you know how and what you can use to make New Year’s wreaths from scrap materials. There will definitely not be any difficulties in such work, and the process will be a pleasure, and the result will please the eye. Use the instructions below and everything will work out!

Create or buy a frame of the desired shape and diameter;
Attach the base material to the frame on which decorations will later be attached;
Make loops to secure the wreath;
Decorate the product using any available means.

I wish you all the best. With coming!

You can decorate your home during the New Year holidays with a Christmas wreath. It can be made from decorative and improvised materials.

Thoroughly prepare for the New Year The modern Aliexpress store will help. Here you can find huge selection gifts, decorations, decorations for the Christmas tree and room, New Year's costumes, cards and much more. Simple with minimal input of personal data will help you make yours with free shipping.

IMPORTANT: If you want to save time and quickly start viewing the product catalog, you should fill out the registration form. A video instruction in Russian will help you learn more about the operation of the site.

IN Aliexpress you can buy a Christmas wreath incredible beauty at an affordable price. To find the required product category, you should use two search methods:

Via the menu
Via the search bar

First way involves using the menu located on the left side of the screen. There you need to find item "For home and garden" and choose "Holiday decor." Second way suggests entering the name of the required item in the search bar, for example, "Christmas wreath" and a large catalog of models will open to your eyes.

How to buy a Christmas wreath from Aliexpress?

DIY New Year's door wreath made of pine cones: master class

If you do not have the opportunity to purchase a beautiful Christmas wreath, you can make it yourself. To do this, you need to use any available material, for example, bumps.

Every person has bumps associated with the New Year, winter and Christmas tree, which is beneficial will emphasize the festivity of the Christmas wreath as a decorative element. You can simply collect this material on the street, in a park or in the forest. He is in freely available and in large quantities.

The basis for such a product will be thick cardboard. This is what should be cut into a ring shape preferred size. For this ring you need attach pine cones of different sizes using hot glue, rubber glue or superglue. You can glue the cones the way you like, in any direction. The more pine cones you glue, the more beautiful and voluminous your wreath will look.

The cones can be left in their original form. Some prefer paint the pine cones with silver or gold paint from a spray bottle. You can also, if you wish, decorate the edges of the cones with artificial snow, pearl beads, bells, satin ribbon bows, Christmas balls and snowflakes.

An easy way to make a Christmas wreath from pine cones

Instead of cardboard, you can use a ring of thick metal wire as a basis. A loop should be attached to each cone, which will serve as a method of attachment.

Christmas wreath made of pine cones on a wire base

Options for ready-made crafts:

Christmas wreath made of pine cones, acorns and walnuts

Wreath of different types of cones

Wreath of pine cones and viburnum fruits

Wreath of pine cones, Christmas balls and chestnuts

Video: “DIY New Year’s Christmas wreath. How to make a wreath of pine cones"

DIY New Year's wreath on the door made of fir branches

Wreath of fir branches- a beautiful decoration that has not only festive energy, but also incredible beauty. This product is usually hung on the door. However, it can also be place on the wall and replace their Christmas tree.

In order to make such a wreath, you will need Christmas tree branches(they didn’t eat, the spruce has long needles, and the Christmas tree has short ones). During the New Year's Eve, twigs can be bought at Christmas tree markets, or cut in the forest.

For the base you can use ring made of thick cardboard or plywood. It can be painted with green paint (the color of the Christmas tree) or wrap with thick canvas thread(sold in craft and household supply stores, sometimes the thread is called “brushwood”).

Cut the branches of the Christmas tree so that you have a large number of tassels of approximately the same size. They can attach to the base using a hot gun, each time waiting for the glue to dry completely. Another way - nail with a construction stapler, if you have one.

The Christmas tree should be mounted so that it faces either in one direction (clockwise) or in different directions (with rays). Of course, in order for a product to look aesthetically pleasing, it needs to be decorate with many decorative elements: ribbons, bells and Christmas tree decorations.

Christmas wreath made from Christmas tree branches:

Wreath of Christmas tree branches, vines and viburnum

Wreath made of artificial Christmas tree and viburnum, decorated with ribbons and Christmas tree decorations

Lush Christmas tree wreath with toys

Video: “Beautiful DIY wreath”

DIY New Year's paper wreath

If you don’t want to cut the Christmas tree or don’t have time to collect pine cones for a wreath, you can make it out of paper. This is an easy way to create a beautiful decoration for your door, wall or window.

It will be voluminous, beautiful and New Year’s a wreath made from a large number of snowflakes. They should be cut from white album sheets. You can attach snowflakes onto a cardboard base using glue.

You can add elegance to the wreath using decorative ornaments:

Satin ribbon bows
Pearl beads
Sequins and rhinestones
Bells
Cones
Acorns and chestnuts

New Year's wreath made of paper snowflakes

An original and beautiful paper wreath for the New Year can be made from folded paper. Choose thick kraft paper or cardboard in green, brown, red, and gold colors. Decorate the finished product with red ribbon bows.

Original paper wreath

Unusual wreath of paper flowers

Wreath made of paper rings

Video: “DIY New Year’s paper wreath”

DIY felt door wreath with your own hands

Felt is very easy-to-work material. Crafts made from it always keep their shape, it is available in a large number of colors, and is easy to cut and attach. In addition, felt is pleasant to the touch, it is soft, has smooth edges without protruding threads.

New Year's wreath made of felt It will turn out not only colorful, but also soft. The easiest way to create such a decoration is glue the cut out parts onto a cardboard base. First, green leaves are attached, imitating Christmas tree branches or mistletoe, and then the remaining elements.

The wreath should be decorated with pre-sewn or other Christmas tree decorations. Toys should be associated with the New Year and Christmas holidays:

Gingerbread Man
Lollipops
Snowflakes
Father Frost
Snow Maiden
Gift boxes
Socks for gifts
Bows
Asterisks
Snowmen
Christmas decorations and much more

Colorful New Year's felt wreath

Another way to sew a felt wreath is to make a textile base and fill it with regular cotton wool. After this, the wreath is decorated to taste with decorations, beads, and bows.

Felt New Year's wreath

An unusual way to decorate a New Year's wreath with felt

Video: “DIY New Year’s felt wreath”

How to make a New Year's wreath from tinsel?

Making a Christmas decorative wreath from tinsel is the easiest way. This material is available in every home and can always be purchased without any problems before the New Year.

You must have a ring - wreath base. It can be made from thick paper, cardboard or plywood. After that Each strip of tinsel should be wrapped around the base. For work, it is best to choose a large, lush “rain” that imitates Christmas tree needles (green, matte).

You can attach any decorations to the wreath wrapped in tinsel: pine cones, gingerbread cookies, Christmas tree decorations, satin ribbon bows, beads.

Christmas tinsel wreath

Video: “New Year’s wreath and tinsel tree”

How to make a New Year's wreath from newspaper tubes?

Wreath made of newspaper tubes- the product is very beautiful, but complex in the sense that the work to create it is painstaking and long. You will need roll a large number of thin tubes from newsprint and fasten them with PVA glue.

How to roll paper tubes?

After this you should take a thin round pipe as a basis small diameter and start weaving with newspaper tubes around her, as if from a vine.

Tube weaving

The finished wicker frame can be painted with acrylic paints of any color and decorated with Christmas tree decorations.

Ready product

Video: “New Year's wreath. Weaving from newspaper tubes"

How to make a New Year's wreath from balls?

You can make a beautiful New Year's wreath using thick metal wire and Christmas balls of different diameters. It is necessary to twist the ring of the desired size and gradually string the balls onto it in different orders.

You can use balls of the same or different colors. A wreath made of balls and other decorations: cones, bells, bows looks beautiful.

New Year's wreath made of Christmas balls

Video: “Christmas wreath made of Christmas balls”

DIY New Year's door wreath made of pasta

Pasta can serve as a wonderful decor for a Christmas wreath. The fact is that this product has many shapes and figures that will advantageously decorate an object such as a wreath.

The pasta should be attached with glue and, after complete drying, coated with gold or silver paint from a spray bottle. Decorating with beads, sparkles and beads will decorate and transform the wreath.

Christmas wreath made of macaroni

Video: “DIY Christmas wreath made from pasta”

DIY New Year's candy wreath

Sweet tooth may decorate the New Year's wreath with candies. To do this, you should use the same cardboard base in the shape of a ring. Candies should be secured with glue by the tail of the wrapper. It is best to use sucking candies and caramel candies.

Candy wreath

Candy cane wreath

Video: “New Year’s wreath of truffles”

DIY New Year's wreath made of threads

Such a wreath can not only surprise your guests, but also lift their spirits. There are two main ways to decorate a cardboard wreath base:

You can wrap the ring tightly with threads of the same color
Attach small balls of thread

You attach the rest of the decorative decorations according to your preference.

Wreath made of threads

Yarn wreath

New Year's wreath made of threads

Video: “Christmas wreath made of threads”

How to make a New Year's wreath from beads?

A wreath made of beads for the New Year is a painstaking work that only real masters can do. In addition, the product takes a lot of time, but the result looks very beautiful.

Christmas wreath made of beads

Video: “New Year’s wreath made of beads”

How to make a New Year's wreath from foamiran?

Foamiran- a material from which you can make beautiful decor in order to Decorate a Christmas wreath with it. Flowers made from foamiran turn out to be unusually realistic, bright and voluminous. It is easy to decorate the base ring of the wreath with flowers and leaves.

Foamiran for decorating a Christmas wreath

Video: “Decorating a New Year’s wreath using foamiran”

How to make a New Year's wreath from satin ribbons?

The wreath can be made or decorated with satin ribbons. This material looks colorful and bright, has a pleasant shine. If you choose New Year's colors (red and green), you can get a beautiful product.

Satin ribbons for decorating a New Year's wreath

New Year's wreath ideas: photos

Practice shows that you can make an incredibly beautiful wreath for the New Year and Christmas from almost any material. The main thing is to decorate it with bright decorations, sparkles and try to pursue red, green and blue shades of flowers.

New Year's wreath made of popcorn and pompoms Video: “DIY New Year’s wreaths”

New Year is a holiday highly revered in our country. This is a new stage of life, many believe that with the advent of next year, changes are bound to happen. And they depend on how you spend this holiday. There is even a proverb among the people: “how you celebrate the New Year is how you will spend it.” On this holiday, it is customary to prepare many different dishes, clean the house and decorate it in every possible way. Even without following traditions, people still decorate their homes before this holiday, since decorations are the harbingers of the holiday. They create a special atmosphere, create a New Year's mood and allow you to surprise guests with the skill of the owner. Today we will dedicate the day to create a DIY New Year's wreath with you.

Decorations are harbingers of the holiday

For the New Year's Eve, a wreath will be an excellent decorative element.

Wreaths are made from anything

In our country, it is customary to make a wreath as a New Year's decoration. However, it has a certain history and symbolism. This decoration came to us from Western countries, where it is a symbol of Christmas. And its real name is “Advent wreath”. Its invention is believed to date back to 1839, and is attributed to the hands of Johann Hinrich Wichern. A Hamburg theologian and Lutheran raised children from a poor family. With the onset of winter, they often asked their mentor if Christmas would come soon (and according to Catholic traditions it is December 25). So that the pupils could count down the days until Christmas, he made a wreath from an old wheel, branches from the garden and satin ribbons, and put 24 small red candles and 4 large white ones in it. Every day the children lit one candle, and on Sunday, along with the small one, they also lit a large white candle. So on December 24, the last candle was burned on Christmas Eve, which indicated the coming of Christmas.

This version is the most famous. However, there is information about ancient Germanic settlements where such wreaths were made before Christmas. The ancient Slavs made similar wreaths from ears of corn and hung them on the door at the entrance. They considered him a talisman and revered him very much. But there is no exact information about what these wreaths looked like and what symbolism they carried. In the old days, the Ukrainian Slavs, for example, used the didukh decoration as a symbol of Christmas. This is a sheaf of straw, which was installed in the corner of the house under the icon. It was considered a talisman, a symbol of wealth, prosperity and preservation of the ancestral family.

In modern traditions, the Christmas wreath has lost its symbolism and is used as a decoration. Often, fir branches, holly, mistletoe and poinsettia are used to make it. These plants are famous for their ability to stay green all winter. In addition, there is a belief that if two lovers kiss under a wreath of mistletoe on Christmas night, their life together will be full of happiness. So, this decoration is hung above the front door or placed on a festive table. In the second case, candles are often used to light them on New Year's or Christmas night.

In general, this tradition is typical for Western countries. However, we also find it in our country as a decoration. Only here it does not carry any special symbolism, and wreaths are made not for Christmas, but as a New Year’s decoration. They look very attractive. We propose to create this miracle.

The New Year's wreath has its own history and symbolism

There are several stories of the appearance of the wreath

General principles

Although the Christmas wreath is recognizable in any form, it has its own modification in different countries. So in Scotland we will see pieces of tartan fabric on the product along with spruce branches. American decorations use red ribbons, maintaining the country's traditional Christmas combination of red and green. In France we see wreaths with dried flowers intertwined. We use all available means. So you can see on your neighbors’ doors wreaths made of socks, ties, tinsel, and of course traditional fir branches.

For each country the wreath has its own modification

The purpose of all wreaths is the same, only the modifications differ

Red ribbons are used in American jewelry

But regardless of their modifications, Christmas wreaths have a common creation principle. Only the tools and materials used differ; in some cases, the number of stages and principles of creation may differ. Let's divide the work into several stages.

		materials	tools
Preparatory	Prepare everything you need	Depends on the type	Pliers, thread, glue, scissors
Creating the Foundation	Make a circle for the wreath	Wire, cardboard	Pliers, scissors
Preparation of decorative elements	Cut off the required amount of tinsel or spruce branches, string candies onto a thread, etc.	Candies, tinsel, Christmas tree decorations, fir branches, ribbons, pine cones, etc.	Scissors, glue, threads, varnish, paint
Preliminary layout	Create a composition without fixing it	Finished circle, material chosen as a base
Final stage	Lock all elements to the base	All finished parts of the composition	Glue, threads, tape, wire

We see the main stages of creating a composition. We will follow them as we work. Let's start making holiday decorations by looking at different types of New Year's wreaths.

Making your own wreath is easy if you follow the instructions.

Any available means can be used for a wreath

Various options

We offer you a variety of options for making New Year's wreaths. You will be surprised what materials are used and how many modifications of wreaths there are. We have already said that the principle of their creation is similar, but only the external design differs. And the ring for the New Year's wreath on the table is approximately the same for different options. There are two most used types: wire base and cardboard base. Of course, you can make a circle out of paper, wood, foam, or not use a base at all. However, the use of cardboard or wire will help make the product more durable. So, let's start with the basics.

A wreath can be made from cardboard

The wreath ring can be made of metal or cardboard

The use of wire can make the wreath more durable

Wreath ring

First, decide on the size of the future wreath. It depends on its location. If you plan to decorate the table, remember that it should be neat and not interfere with the food, but at the same time noticeable at the holiday.

So, first, draw a circle on a piece of paper that matches the size of your future wreath. Now cut the amount of wire to fit the circumference. We calculate its size using the presented formula:

Where C corresponds to the circumference, n is a mathematical constant equal to 3.14, r is the radius of the circle. You can measure the radius with a ruler and calculate the required wire length using the proposed formula. You can also use another method, and by applying the wire to the sketch of the circle, determine the required length. It’s even easier to form a circle “on the fly” without precise calculations.

In any case, we have decided on the length. Now twist its ends using pliers to form a circle. Depending on what the next layers are made of, wind one or two more layers of wire, fastening them all together. Ready.

The cardboard ring is made without a blank. A circle of the required diameter is drawn on a sheet of cardboard. Next, a certain distance from the outer line is set aside at four points of the circle (so that the inner one turns out even). The inner circle is drawn using the marked points. Now we remove it without disturbing the external one. So we only have the headband left. These are the rings for the New Year's wreath, on which decorative elements are attached.

Now the base is ready, and with its use we can start making Christmas decorations using various materials.

First of all, you need to decide on the size of the wreath.

It’s much easier to make a wreath on the go, rather than counting every centimeter

Christmas tree branches

It is worth paying tribute to tradition. The symbol of the New Year, and in Western countries, where this tradition came to us, and Christmas, is the New Year tree. A wreath made of fir branches is perfect as a decoration for a door, window, or table.

To create it, use both wire and cardboard bases. It is better to wrap the latter in a thick layer of paper to add volume. Now we prepare the decorative part. Take spruce or pine branches (with short needles), cut them into small pieces, prepare glue and yarn. Additionally, you can use pine cones, satin bows, artificial berries, bells, etc. But don’t overdo it. It is advisable to mix no more than three colors (in our case, green, red and gold).

Now let's start with the layout. It is carried out in two ways.

Regarding fasteners, you can:

tie the branches to the base using threads;
glue them using polymer glue.

The most popular is a wreath made of spruce branches

Toys, pine cones, and ribbons are suitable for decorating a wreath.

To create such a wreath, you can use cardboard and wire.

As for the appearance, we make the wreath in the following variations.

“Russed”, arranging the branches in a chaotic manner. To do this they must be short. Place them on the glue so that they stick up. Fill in the gaps and add braid, pine cones, etc.
“Smooth” compared to the first option. To do this, we tie the ring so that the branches are on both sides, and they are attached to the inside of the ring. This way they will be directed in one direction (from the inside to the outside), and we will get a relatively smooth and voluminous wreath. For this option you will need flexible and long branches.

A wreath of holly, fir or mistletoe is made in the same way. You can find it in flower shops or grow it in the garden. This amazing plant also remains green throughout the year.

The wreath can be made smooth by placing the branches in one direction

By arranging the branches in a chaotic order, you can get a voluminous wreath

Natural materials

Other natural materials that are quite suitable for making a New Year's wreath for the table with your own hands include pine cones, acorns, nuts, tangerines (dried), and berries.

For these materials, it is better to use a cardboard base, tying it with a large layer of paper or fabric (for volume). The best way to secure it is with glue.

You can make a wreath made entirely of pine cones. So, paint them the same color, different ones, or leave them natural brown. The pine cones also make excellent company for tangerines and cinnamon sticks. Gifts from a squirrel - nuts and acorns - look good together.

It is better to dilute such compositions with green color, using natural green leaves or a few sprigs of pine needles. It will also work well to keep the entire composition brown by adding twine or burlap to it.

Natural materials can be used for decoration

Pine cones are perfect for decorating a wreath

For natural materials it is better to use a cardboard base

Fabric and thread

By the way, about burlap. Use it yourself too. This is a great material for creating a warm, rustic atmosphere.

Create a wreath using burlap squares. We cut out identical squares and modify them as desired. We suggest folding them, turning the edges, and placing them overlapping each other. This way fill the entire circle. Add some greenery and a bright bow to the composition.

Another option. Cut a long piece of not very stiff burlap, fold it in half and sew it together. Then, using a needle and thread, sew a stitch down the center, gathering the fabric a little (to create an “accordion”). Here we have an airy and light wreath. Use it without a base, or secure the resulting element on a cardboard ring, diluting it with decorative elements (bells, stars, berries, etc.).

We present an original idea using threads. A wreath of colorful balls. This option looks great both on the door and on the table, symbolizing home comfort and warmth. It is made as follows.

Make balls of wool of varying sizes. The threads should be woven as freely as possible to make the balls light. Then sew or glue the resulting balls to the cardboard base in a chaotic manner, quite tightly. Knit a small fabric from the same threads. Sew it to several balls and stick the knitting needles. This idea looks creative and adds a special coziness.

You can use fabric and thread to decorate the wreath

This wreath looks very beautiful and gives the room a special atmosphere.

Tinsel and Christmas tree toys

New Year's tinsel is a material that is found in every home and is a symbol of the New Year. It will also make a wonderful Christmas wreath.

Here we will use a wire base. It is enough to wrap a large amount of rain around it to create a voluminous silhouette, and the wreath is ready. We dilute it with cones, acorns, sweets, and New Year's balls. By combining several colors of New Year's tinsel, you will get a wreath with a pattern that does not require additional elements.

The mentioned New Year's balls, like other Christmas tree decorations, can be used independently. The principle is the same. Secure them to the wire frame with a thread, and the wreath is ready.

There are also many ideas: use pasta, socks, ties, beans, clothespins, sweets... In general, whatever comes to your mind. The main thing is to have a festive mood while working.

Video: DIY New Year's Christmas wreath

50 photos of ideas for creating a New Year's wreath with your own hands:

How to make a New Year's wreath with your own hands? This issue is especially relevant on the eve of the New Year holidays. After all, everyone wants to create a magical holiday atmosphere, which means it’s time to think about how to make a New Year’s decoration for the door with your own hands.

By the way, are you aware that nowadays the tradition of hanging a wreath on the door is gaining popularity in Russia? According to the teachings of Feng Shui, a wreath is hung on the door not only to please the eyes of passers-by, but also to attract good forces into the house, and scare away evil ones with a bright and beautiful decoration.

Therefore, we tell and show different options on how you can make a Christmas wreath with your own hands using examples of detailed photo instructions.

How to make a base for a wreath with your own hands

Before we begin with examples of how to make a wreath with your own hands, it is worth saying a few words about how you can make a base for it. After all, it is this that largely determines the appearance of the future wreath. Of course, the easiest option is to buy a ready-made base in a retail store or look for them on the Internet. But if you haven’t seen it for sale in retail stores, and you don’t have time to wait for it from an online store, there is only one way out: make it yourself.

What to make the base from? From anything. As a base, you can use an embroidery hoop, wire, a circle cut out of cardboard or foam plastic, a corrugated tube (for example, from an old vacuum cleaner), or thermoflex (this is pipe insulation - sold in hardware stores). If you choose thermoflex or corrugated pipe, you will need to work a little to create a circle shape, namely: simply cut off the required length and glue the edges with tape or tape. A more troublesome method: glue together cardboard toilet paper tubes.

You can also make a good base from newspapers or old paper. And in several ways. You can paste newspaper sheets or newspaper tubes over a cardboard circle or wire, or you can form a tight circle purely from newspaper sheets. In all cases, for reliability, the newspaper base should be wrapped at the end with thick paper towels, and at the end with tape or nylon tights - this way you will align/smooth the edges and give strength to this structure and the wreath as a whole.

In addition to old newspapers and magazines, any other paper will do; secure it to the cardboard circle with threads, as shown in the photo example below.

And, of course, we must not forget that you can weave a wreath from branches with your own hands (from birch or willow). It is better to use freshly cut branches for weaving. If they are not elastic enough, they need to be bent every 5 cm or soaked in water (if bending does not help). See the photo instructions below for the weaving process itself. In general, nothing complicated; if the branches slip out, secure them with glue or thread.

How to make a New Year's wreath with your own hands

Now let's talk about how to make a wreath with your own hands. In fact, we will consider different options for decorating ready-made bases.

Since New Year and Christmas are, first of all, the smell of a Christmas tree, first of all we will consider a couple of options on how to make a wreath from living spruce, fir or branches of some other coniferous plant. Where to get branches of a coniferous plant? - As a rule, Christmas tree sellers also sell twigs, or if you buy a live Christmas tree for home, when installing it you will definitely have a few extra twigs.

So let's get down to business. Everything is simple here, we cut the branches of the appropriate size (as shown in photo No. 2 - we cut them from a large branch, smaller branches) and fix them to the base with threads, wire or staples. Using glue, we glue the protruding edges to its side surfaces every once in a while. When it is all hidden under the branches, start decorating: glue small Christmas balls, snowflakes, pine cones, nuts (pre-painted white as an option, except for paints and glitter) and at the end we braid them with beads or garlands. We hang the finished Christmas wreath on the door or place it on the table, placing candles or a bottle of champagne in the center.

By the way, if you decide to make a New Year's wreath from living branches, the branch itself will be perfect as a base; of course, it will not be as lush, but no less beautiful. Follow the instructions in the photo below.

The result is a beautiful New Year's decoration, and, by the way, it will take less time to create it than in the first case.

I hope you get the idea, but otherwise, you can come up with your own way to decorate the wreath: stick to some other color scheme, use some other decorations (wide ribbons, candies, bells, cinnamon sticks, dried oranges) let your fantasies!

In addition, living twigs can be used to braid wire or embroidery hoops. Add decorations in the form of berries or beads, a bow made of a beautiful ribbon and the New Year's decoration on the door is ready.

By the way, such a thin wreath can be hung from the ceiling above the dining table. Add a string of beads to the greenery for an elegant statement piece.

Using different types of branches, cones, artificial horns, God himself ordered to make an unusual wall-mounted New Year's wreath, as shown in the photo below. Agree, it turns out to be quite a worthy New Year’s decoration.

In addition to “green” branches, you can also use “naked” ones to create a Christmas wreath; the main thing is to paint them with paint and/or cover them with artificial snow - you will get a truly magical winter decoration for the door.

Don't know how to make artificial snow? - it’s simple: mix together semolina, white paint, PVA glue and artificial snow is ready. Another way to make artificial snow: mix grated white soap and starch diluted with warm water. You need to beat with a whisk until you get a homogeneous mass. In both cases, adjust the proportions yourself.

Continuing the theme of “natural” materials, it is worth noting the beauty and elegance of New Year’s wreaths made purely from pine cones, walnuts (you can use any other nuts) or acorns.

Pay attention to the way to make a wreath of cones: rings are glued to each cone, which are then strung on wire. Using the same method, you can make a wreath of Christmas balls.

Cinnamon sticks also deserve attention, and you can glue whole sticks, or you can cut them into pieces.

And, of course, round “cuts” of branches, glued to a circle made of wood or cardboard and decorated with a small composition of ribbons, twigs and cones. I think many people will like this New Year's wreath.

And if you do not have the opportunity to use live spruce branches for one reason or another. You can use Christmas tree tinsel to make a beautiful New Year's wreath for your door with your own hands. Decorate it with ribbon and an artificial flower.

Artificial flowers are also worth paying attention to: you can make a wreath from artificial flowers. Make holes in the round base, insert the stems into them and tuck them.

You can also use a voluminous base: simply wrap the stems around it or cut off the stems and glue the flowers.

Yes, if you decide to make a New Year's wreath for your door from tinsel, you don't have to take only green, other colors are also great.

Along with tinsel, “bows” made from ribbons, which are usually used for gift wrapping, are great.

Another great idea to make a New Year's wreath: use glass Christmas tree balls, as mentioned above, you can string the balls on a wire, or you can glue them. The balls themselves can be the same color, or you can combine multi-colored balls with each other. In both cases, the finished New Year's wreath is pleasing to the eye.

In addition to glass balls, you can use “wool” balls. To create them, you need to wrap foam balls with threads or make small loose balls of wool alone.

You can make a good wreath if you wrap the base with woolen threads and glue only a few woolen balls.

Or make wool pompoms.

Or you can combine balls with paper (pages from some not very interesting book). Make small bags out of paper and cover a circle with them, and decorate the top with small balls or beads.

Or make a wreath for the door purely from tubes of some beautiful colored paper.

In addition, you can make an accordion out of paper, which can be used to braid a hoop.

Or you can make paper stars or snowflakes. In the case of stars: it is better to make them from thick paper or cardboard, glue the stars to the hoop and paint the almost finished wreath with spray paint. After the paint has dried, wrap the wreath in several layers of twine with beads glued on - and you can enjoy the result.

A New Year's wreath made of plastic snowflakes looks very beautiful; they can be additionally decorated with small mirrors and/or decorated with rhinestones and sparkles. In addition, paint it one color, or vice versa, make it multi-colored, sprinkle it with sparkles, etc. You will get an unusual Christmas wreath.

And don't forget that the wreath can be wrapped in a garland. It will make your wreath truly magical.

Or you can make a large snowflake wreath for the door from ordinary ice cream sticks.

Let's return to woolen threads, you can wrap the base for the wreath with threads, and glue flowers made of felt, beads, etc. on top.

Another great way to make your own wreath is to use old socks. In this case, we used hoops of different sizes, laid them on cardboard and cut out a circle, which was then wrapped in socks, threads and placed between the hoops. The result was a beautiful unusual New Year's wreath for the door.

In addition to socks, you can use any other fabric: burlap, organza, etc.

In addition to cuttings of different fabrics, you can use an old sweater. Spread the sweater and wrap the round base with suitable pieces (you can sew the edges with threads or glue them with glue), decorate the top with felt or felt flowers. The result will be a soft, somewhat “cozy” wreath.

In addition to different fabrics, different ribbons, twine or rope will be useful.

By the way, here is a clear example of using a corrugated tube from an old vacuum cleaner. At first glance, you won’t guess what such a wreath hides inside.

You can also make a cute wreath using cotton balls. Moreover, if you add only a burlap bow to it, as shown in the photo below, you will get a wreath in a rustic style. Or you can use brighter decorations.

You can even create a spectacular wreath from candies (if you don’t mind them).

If you have a foam base: cut out/extrude leaves on it, decorate it with a green marker or paints, without touching the extruded areas, and glue the beads. The finished wreath will please you and it won’t take you much time. By the way, even a small child can do it.

By the way, if you decide to make a wreath for the door with your own hands, you don’t have to make it round. You can use an old frame. Paint it and tie multi-colored balls on ribbons to it - you will get a bright wreath.

Or you can even build a snowman on the door.

In general, as you can see, there are many ways to make a New Year's wreath on the door with your own hands, so experiment! And you will definitely be able to make a beautiful Christmas wreath with your own hands. Happy New Year!

Master class with step-by-step photos on making a New Year's wreath

Gaponova Natalya Mikhailovna, technology teacher at MKOU "Secondary School No. 29" in the city of Revda, Sverdlovsk region
Description of work: The master class is intended for technology teachers, additional education teachers, children aged 13-18 and their parents who want to try themselves in working with various materials and decorate the interior of the apartment with interesting New Year's works.

Purpose: The product can be used as a gift for New Year's celebrations, as well as as decoration for the interior of an apartment, classroom, or any room.
The purpose of the teacher’s activity: Develop creative thinking, perception, accuracy. Follow safe work rules.

So, let's start creating!

Christmas wreaths are an interesting and versatile decorative element. It can be used to decorate almost any room and object, since the wreath can be either hung or simply placed on a flat surface.
We owe the appearance of the Advent wreath to the Lutheran theologian Johann Hinrich Wichern. As the story goes, he mentored several orphans in the early 19th century. The theological expert in every possible way expanded the children’s knowledge in the field of theology, and to make religious dogmas easier for them to perceive, he came up with various “visual aids.” To count the days of fasting before Christmas, he invented a wreath, or rather, it was an ordinary wheel on which candles were placed (a kind of prototype of the future Advent wreath), which served as calendar days - small candles were lit on weekdays, and large ones on weekends.

So, once upon a time the Advent wreath replaced the calendar, and after a significant amount of time, it turned into a symbolic and beautiful attribute of the New Year holidays.

The Christmas wreath began to be decorated in all sorts of ways - with fir branches, New Year's toys, ribbons, etc. And also, he changed the location - now not only tables are decorated with wreaths, but they are also hung on doors and windows. Thus, while maintaining the status of a symbol of the winter holidays, the Christmas wreath has completely lost its original purpose and meaning.

There are no restrictions in creating Christmas wreaths, and wreaths made using different techniques and from completely different materials can easily coexist within the same apartment.

To make our New Year's wreath we will need:

1. Thick cardboard for making a circle.

2. Old unnecessary magazines, newspapers to create the volume of the wreath.

3. Artificial spruce branches, New Year's balls of different diameters, satin ribbons, New Year's beads, fir cones, a glue gun and glue sticks for it, masking tape, green corrugated paper and various New Year's elements.

Stages of work:

1. We prepare cones. We select by size (this depends on the radius of the wreath), if the radius is large (25-30 cm), then the cones are larger, if the radius is small (18-23 cm), then the cones are smaller. We paint the cones with acrylic paint (spray can).

2. Decide on the radius of the wreath. Cut out a circle from thick cardboard, as shown in the photo above. We fold an accordion out of old magazines or newspapers and glue it tightly to the circle.

3. In this way we fill the entire circle.

4. Wrap this blank tightly with masking tape.

5. Then we wrap the workpiece with green corrugated paper.

6. Strengthen the hanger. This could be some kind of decorative loop or satin ribbon. In my case it was a satin ribbon.

7. We begin to fill the circle with spruce branches. We glue the twig so that part of the twig looks to the side, and the other part is tightly glued to the circle. Glue with a glue gun.

8. Gradually fill the outer and inner circle of the wreath.

9. Fill the circle with spruce branches so that there is room in the center for decorative elements.

10. We begin to decorate the wreath. Glue cones and New Year's balls of different diameters.

11. It is important not to overload the wreath with various elements, but this is a matter of taste...

12. I made wreaths as gifts for all my family and friends, this is what I came up with!

13. If the wreath is not made of spruce branches, then the color of the corrugated paper may not be green, but the color of your wreath, as in my case the paper was pink.

14. Happy and fruitful creativity to everyone! Happy New Year and Merry Christmas!