Crafts for children from construction foam. Foam crafts: ideas and technology

Polyurethane foam is a unique building material that is widely used for mounting, sealing structures and increasing their thermal insulation. Lovers of garden decorations have expanded the scope of this building material. Do-it-yourself garden figures from mounting foam can be easily made by every owner of a country house or summer cottage. In this article you can see photos of finished crafts, as well as popular foam sculptures.

1. Light weight.
2. Ease of use (applied to any surface, easy to cut).
3. Ability to make crafts of any size.
4. The finished product is not affected by precipitation and temperature changes.

Terms of use of mounting foam for garden sculptures

Terms of use of mounting foam for garden sculptures

If you have never worked with mounting foam, we recommend that you read the instructions from the manufacturer. Do not forget that the foam inside the balloon is a liquid mass, and when it comes into contact with air, it begins to harden. Complete solidification occurs after 10-12 hours. When working with foam, use personal protective equipment. It is not advised to carry out work at sub-zero air temperatures.

Shake the can well before each use of the mounting foam. During operation, hold the can with the cap down so that the gas does not escape from it and all the foam can be used. Do not immediately apply many layers, as the uncured will fall off. Do everything gradually, apply the next layer at least 10-15 minutes after the previous one. For ease of application, use a special gun.

The appearance of the polyurethane foam figure directly depends on the type of frame. You should first find a picture of the figure or make a sketch to take into account all the nuances and the finished product looked like a wooden or plaster sculpture.

For the manufacture of the frame, you can take different materials, for example, plastic bottles or iron cans are suitable. You will also need wooden planks, rebar and wire. To make the sculpture stable, you need to fill it with sand.

Now you can start decorating crafts with mounting foam. Evenly distribute the foam over the frame, taking into account the future reliefs of the craft. When it completely hardens, it will be possible to remove unnecessary parts with a clerical knife and correct defects. If necessary, add foam to places where you forgot or want to fix something in the craft.

A layer of putty will help protect the mounting foam from destruction. To make the garden crafts smooth, grout with sandpaper. Now take acrylic paints and cover the figure. Preferably two layers or more. To prolong the life of the future masterpiece, it is varnished on top.

Garden figures can be additionally decorated with a variety of materials, for example, beads, flowers, or LED lighting can be made so that the sculpture glows at night.

To make a garden snail, you will need half a can of foam. Cover the table with oilcloth and start applying foam for the base of the snail. When the first layer dries a little, apply a second one and insert a kefir bottle in order to make a snail's neck. Cover the neck with foam too and shape the head with your hands.

Make snail horns and a slightly elongated muzzle. After that, you can start making the shell. To do this, a round hill of foam is applied to the body of the snail. Now insert a bucket that will be designed for flowers and turn the garden craft into an original flower bed.

With a marker, mark where your snail shell begins and ends, and make curls. When the foam is completely dry, sand the product. It remains to decorate the snail and the garden craft is ready.

Materials:
- an old saucepan;
- iron can:
- oil or acrylic paint;
- foam bottle;
- wire;
- beads.

1. Separately fill the pot and jar with foam and let dry.
2. The jar is the head, and the pan is the body of the frog. Fasten these parts with wire and fix with foam.

3. In the place where the frog handles should be, fix the wire and also cover it with mounting foam.
4. Now shape the head and torso to look like a frog. Make the lower legs as well.
5. Paint the craft with paints and then insert the eyes. The frog is ready, now it can be placed near the pond in the garden or near the pool.

To make a garden fox figurine, you will need a plastic bottle. Fill it with sand or pebbles, then the wind will not be able to turn your product over. Foam the bottle, but not immediately with a thick layer, but gradually, pausing for about 15 minutes to set the foam.

For the manufacture of paws, you can use a rubber tube. To make the paws flexible, insert a wire into the tube. The tail can also be made from a tube, which will need to be well lathered. For the neck, use a cardboard cylinder from under the toilet paper. Install some kind of round blank for the head on it.

Propene everything well and give the sculpture the appearance of a fox. After that, paint the figure with oil paints and varnish. Keep in mind that if the paint is white, then the varnish will give it yellowness.

A plastic ball can be used as the frame of the kolobok. Place it on some kind of support, such as a jar or bowl. Apply foam now, waiting for each layer to dry. To make handles, insert wire.

Also form a scarf out of foam, and you can make ears out of cardboard. When the foam is completely dry, cut out the eyes, mouth and nose with a clerical knife. Make the legs out of wooden boards. It remains to color the craft and the gingerbread man - ready!

It is interesting that not only garden figures can be made from polyurethane foam, but also an original lantern that will give your backyard a touch of exclusivity and help design a garden in the Japanese style. To make a lantern stand, take a pipe that needs to be foamed from the bottom side and set on a flat wooden base. For the bowl of the lantern, you can use a plastic bowl, which must be fixed on top.

Now pour the foam in layers, waiting for the partial drying of each layer. Come up with a picture for the design of the lantern, draw a diagram and embody the idea with the help of mounting foam. Make a hole in the center of the bowl so that you can secure the lid with screws. Insert the bars into the bowl and froth them.

Attach the lid to the bowl with screws. Now cut out a smaller square from the chipboard. On one side, foam it, and on the other, fix the racks. In the center of the squares, you need to make a hole in order to insert a solar-powered lamp into it later. Hide the wires.

After that, a roof is made from a large piece of plywood, which is installed on racks. To make the relief pattern beautiful, first draw it with a marker on the surface of the lantern, and then gently cover it with foam.

Garden figures from polyurethane foam master class

The finished product is completely painted. To install it, you need to dig a pipe into the ground a little or make a small flower bed around the lantern.

Do-it-yourself polyurethane foam figures will help transform any garden plot. Even without the skills of a sculptor and artist, you can make a beautiful sculpture that will enliven your exterior.

from polyurethane foam can also be used to decorate rooms or facades of buildings.

For most owners, the dacha is a place to relax. However, in order to arrange the site properly, you need to spend quite a lot of money. In this regard, some summer residents are looking for opportunities to save money, which is why they are trying to create crafts from polyurethane foam that look no less aesthetically pleasing than figures made of plastic, metal and wood. And today, this option continues to compete with another equally common method - creating crafts from plastic bottles.

Each person who does not have special skills and knowledge is able to make his personal plot more attractive. The main thing is to have abstract thinking, be patient and prepare minimum set of tools. All this will be enough for cheerful gnomes, frogs, lambs and Christmas trees to appear on the backyard territory, the creation of which will require quite affordable materials.

Manufacturing technology

The first issue that must be resolved by the summer resident is the preparation of materials and tools, without which it will be impossible to make crafts from polyurethane foam. Moreover, you should not neglect any element of the list, since this will subsequently affect the quality of the work and the time that they will require.

To make a product frame, you can use plastic bottles, which are pre-filled with sand, boards, metal objects and thick wire. In some cases, you can use ordinary brick to create the basis for the future mushroom on your site.

• mounting foam;
• foam gun;
• gun cleaner.

It's a good idea to use sculpture for growing flowers. But for this, in its center you will have to install a certain container, like a bucket, a can or the aforementioned plastic bottle.

• varnish, paint and brushes for them;
• clerical or other knife;
• several pairs of gloves. They must be present with you, as this will help protect your hands from mounting foam, which quickly and firmly sticks to your hands.

If we consider in more detail the process of manufacturing garden figures from polyurethane foam, then two stages can be distinguished in it, which are carried out in a certain sequence.

• work begins with covering the base with a layer of foam, after which they wait for a pause, which is necessary for the material to harden;
• then we apply the next layer of foam and so on until we achieve the desired shape of the product.

When the desired result is achieved, we take an ordinary clerical knife and use it to cut off the extra protrusions. In the process of such work, we give the sculpture the desired contour, after which you can proceed to its coloring. To complete all the work, you will have to spend from 1 hour to several days. The specific period is determined by the size of the product and the thickness of the applied layer.

It is recommended to engage in the manufacture of garden figures from polyurethane foam in a separate dry room which must be clean and have limited access for children. Otherwise, you will have to spend a lot of time and effort to remove the mounting foam from the surfaces, and for this you will need gasoline or acetone.

Manufacturing examples with instructions

Next, examples of various foam garden figures that can be made without even having experience in this matter will be considered. But in order to achieve the desired result, it is necessary to perform all operations in the exact sequence. It will take a couple of hours, and you will feel like a real creator, in whose hands an ordinary polyurethane foam turns into real masterpieces of art.

Christmas tree

The master class on making a Christmas tree from polyurethane foam is quite simple and understandable. Pre-required prepare twigs to be fixed to the iron pipe. As a fixer, you can use tape or wire.

Then, using a spray gun, the preform is moistened, which will improve the adhesive properties of the foam when it is applied to the base.

After that, we proceed to the processing of the structure with mounting foam, in this matter you can completely rely on your imagination.

Having at hand such affordable things as cutting sticks, twigs, mounting foam and fishing line, it will not be difficult for you to make a Christmas tree with your own hands. And to give a natural look, the Christmas tree can be painted with green acrylic paint.

Ball

If you are afraid to take complex garden figures from polyurethane foam, then you can choose the simplest product, which is a ball. For those who do not have experience in making figures from polyurethane foam with their own hands for decorating a garden, it is recommended to take the first steps in creating this particular figure. And, having stuffed your hand, you can try to create more complex decorations and sculptures.

The master class itself includes the following actions:

• first we need a paint can in which we need to pour sand;
• then we take mounting foam and cover our blank in layers;
• when the product acquires the required dimensions, and the initial shape changes to a spherical one, we take a knife and cut off the excess parts;
• we process our ball with varnish;
• we complete the work on making the ball by coloring, for which you can use the colorful material that you like best.

Ram and sheep

A master class on the manufacture of this garden figure from polyurethane foam with our own hands begins with the creation of a frame. To do this, we need several plastic bottles that need to be connected to each other. with tape. As a result, the craft should resemble something like the “skeleton” of an animal. To give our figure greater stability, the lower limbs can be filled with sand.

After that, you can begin to process the craft with foam. To avoid waste of material, it is recommended to wrap the frame with isolon or other polymeric material. After covering the figure with the first layer of mounting foam, it should already be clear to you what should happen upon completion of this work.

To create the ears, we use pieces of skin. You can also use plastic bottles for their manufacture, which will first have to be heated and bent.

To make a muzzle, you will have to use a knife, forming the necessary features with it.

To make our animals look beautiful, they need to varnish.

Goat

To make the frame, you will need a thick wire, which you need to wrap several plastic bottles around.

To make a frame for the legs, it is recommended to use metal pipes. They are attached to the pedestal by welding, after which they are fixed to the ground, or they can simply be bolted. Make sure that the base of the figure is firmly fixed, otherwise it will fall to the ground from wind or rain.

Then the craft is necessary cover with 1-2 layers of polyurethane foam.

To make the horns and tail, we take wooden shelves or use plastic cuts and attach them to the base.

Having finished applying the last layer, it is necessary to remove the excess parts, after which we wrap the product with a sickle or fishing line.

We finish the work with staining, but first you need to apply a layer of primer. When choosing a color, you can completely rely on your own preferences, because this is your creation and you can show all your imagination here.

We use buttons to make eyes.

Now our goat is ready and can be installed where you see fit - next to a pond, in a clearing, surrounded by other design elements.

Keep in mind that the process of making this craft will take you 1-2 weeks, since you will have to wait for a pause so that each layer of foam can harden. Thus, using orphan pipes, plastic bottles, pieces of wire and other debris and a couple of cans of mounting foam, you can easily create beautiful decorative elements for your summer cottage.

New Year crafts

If you only have wire and a balloon of mounting foam at your disposal, then only with their help are you able to make beautiful New Year's decorations for the garden. These materials will be enough to make a variety of ornaments, Christmas decorations, as well as crafts of varying degrees of complexity.

A good idea is to create a snowflake. For it, you need to take a wire of a certain thickness so that you can easily bend it. It will serve as material for creating the frame of the future snowflake. We begin to cover it with 1-2 layers of foam. Immediately needed correct the shape, giving it a flat and smooth surface, and this must be done before the foam hardens. If any part of the figure turned out wrong, then at any time you can add a small amount of price and remove unnecessary parts with a clerical knife.

You will have even less difficulties when making a Christmas ball. The master class on the implementation of this idea will boil down to the following. For him, you need to take a tennis ball and apply a layer of foam. When the material hardens, we paint the craft, adding bright and positive colors to create a New Year's mood.

You can offer a simpler version of making a Christmas tree. It will require cardboard or isolon, which is wound on a rigid base, giving it the shape of a cone. You can easily apply a couple of layers of mounting foam. Next, it remains to give the craft a flat surface, paint and find a suitable place for the Christmas tree.

Conclusion

In order to make your backyard more attractive, it is not necessary to go to the store and buy special decorative ornaments there. It is within the power of any owner of the site to make beautiful crafts for the garden on their own. Moreover, for this you can use the most affordable materials, one of which can be polyurethane foam.

It's easy enough to work with her., so even the owner, who has never had to deal with such a thing, can easily cope with this task. It is enough to study the master class on creating figures for the garden, and you will succeed.

Mounting foam is a practical and convenient thing. It is very easy to use and handle. In addition, the foam does not cost that much money. And most importantly - it is often found in everyday life in the form of surpluses or leftovers. And if, after the end of construction, crafts for the garden remain, they will become affordable and simple. The main thing is to have imagination and some ability to work with a knife.

To make crafts from polyurethane foam with our own hands, we will need:

• Foam. Depending on the size of the figure, up to ten balloons may be needed.
• The foundation. The object on which the foam will build up (suitable for the shape).
• Knife. It is best to take a sharp and thin one, it is preferable to use a scalpel.
• Paint, varnish.

Planning

To begin with, you need to clearly imagine the size and shape of the figure, which will represent the future crafts from mounting foam with your own hands. You need to proceed only from your own desires, other factors have little effect on the result. After that, the base is selected. You can use any fairly solid objects - bottles, pipes, cardboard, wood, and so on. If the figure will be standing outside, it is better to make the frame relatively heavy so that the creation is not blown away by the wind and does not fall. It is also worth preparing a workplace where handicrafts will be created from polyurethane foam with your own hands - cover or workshop, stock up on solvent (to wash your hands after work is completed) and gloves.

Foam coating

We begin to cover the assembled and prepared frame with foam. You need to do this layer by layer, giving each one ten to fifteen minutes to dry. Attention! Before painting, the foam is very susceptible to direct sunlight, which can adversely affect its properties, so it is best used indoors with closed windows. After application, you can adjust Some parts of the frame are attached to it separately after applying several layers of foam. It is also possible to create whole separate parts, cover them and attach to the main figure using the same material as glue. Only because of drying, do-it-yourself crafts from polyurethane foam are made for a long time.

decoration

After creating the finished form, you can begin to design. The main option is to cover with several layers of paint. First, two, then, after several hours of drying, when the yellowness of the foam appears, another one. For durability and color retention, you can cover with a transparent varnish. Best fit it does not turn yellow. Another technique is to cover with toilet paper and paint it. It's easier and doesn't require a lot of paint.

Application

Foam crafts, photos of which are easy to find on the Internet or relevant magazines, are easy to make and beautiful. Any fantasy can come to life, turning into incredible and bizarre forms. Among other things, they are also incredibly functional - craftsmen make anything with foam, from lanterns to fountains. Foam is easily able to reveal his abilities to anyone. The main thing in this matter is to clearly imagine what should happen in the end and get closer to the result with each step.

Sculpture always attracts the views of others with its three-dimensionality and three-dimensionality. It is always interesting to look at a sculpture, to find new details in it that are not immediately evident. By the fact that the sculpture seems more accessible, it differs from the usual drawing, which, one way or another, lies in the same plane.

But even in childhood, many of us simply loved to sculpt various figures from plasticine. Surely, if you loved to do this, and you were good at it, then you will also succeed in making crafts from polyurethane foam. Sculptures made of polyurethane foam can become practically masterpieces of art, you can install them, for example, in your summer cottage, then your guests and neighbors in the area can admire them.

When starting to make a particular sculpture, you must remember that:

• polyurethane foam is a very light material, so for the sculpture it will be necessary to make a frame. Additional fasteners will also be needed, these can be pins, pegs or something else;
• mounting foam is quite sticky, so it is necessary to work with it in cotton gloves. About what you can wash mounting foam, read here;
• Polyurethane foam contains some toxic chemicals, so it is necessary to work with it in the open air, and besides, it will not be superfluous to use a respirator when working with polyurethane foam.

Tools and materials needed to work with mounting foam.

What you definitely need is a foam gun. To work with such a gun, you will need professional polyurethane foam. You will also need (to flush the gun) a polyurethane foam cleaner, with which you can clean any surface that accidentally gets dirty with polyurethane foam.

The finished sculpture will need to be painted. And for these purposes, you will need acrylic paint, which is pre-diluted with water.

After the sculpture is painted, it will need to be varnished. In this case, suitable varnish, which is used for facade work. So we buy it. Some varnishes can indeed give yellowness, but on the sculptures it will not be so noticeable.

It is interesting that not only sculptures can be made from polyurethane foam, but also used in a different way, for example, to decorate flower pots, I just won’t focus on this in this article.

Garden crafts from polyurethane foam.

If you decide to make a sculpture out of polyurethane foam yourself, then you should understand that this work requires compliance with certain rules. In addition, this work is quite painstaking and consists of successive stages.

First you need to think over the image of the future sculpture. As a frame for it, you can use almost anything: cans, pipes, buckets, bottles, which are interconnected using adhesive tape or the same mounting foam.

If you set yourself the goal of saving a little, then various newspapers can be used to give the sculpture the desired volume, then the foam layer can be thinner, and the foam will last much longer. The foam must be poured layer by layer, and each layer of foam must dry for at least 20 minutes. If you don’t succeed right away, and the foam doesn’t lay down quite the way it should, don’t despair, you can always cut off the excess with a knife and do everything in a new way.

Foam crafts are a very creative and very exciting process, thanks to which you can feel like a real sculptor, and your loved ones will definitely appreciate the result of your efforts. I also advise you to read the article: do-it-yourself crafts for giving and gardening.

Foam crafts video

Interesting DIY foam crafts

Greetings, visitors to the site of crafts. Recently, wandering around the expanses of the global network, I came across interesting pictures - these were foam crafts. This question interested me and I began to dig further. As a result, we got a mini-review of do-it-yourself foam crafts.

Now I myself am trying to make simple things, namely garden figurines from polyurethane foam. I am not endowed with the talent of a sculptor, so I try what I am capable of.

So, let's start our review of crafts from polyurethane foam.
I was very impressed by the work of one enthusiast who managed to create a car body and interior from polyurethane foam.

Of course, a lot of time was spent and work invested. But the result is impressive. Below are a few photos of the homemade creation process and the finished version of the car.

Continuing the automotive theme, it is worth saying that very often Russian car tuners at home make quite nice and comfortable podiums for acoustics.

As a rule, it does not do without the use of mounting foam. Its main advantage is that it is easily processed (cut, puttied, painted, etc.) and sold in any hardware store. Examples of foam podiums are shown in the photographs.

Foam crafts can be works of art.

This is proved by craftsmen who manage to make sculptures from it. It can be figures of people or models of buildings. But in any case, to create such crafts from foam, you need the talent of an artist and sculptor, which is not given to everyone.

We come to my favorite topic - polyurethane foam crafts to decorate the garden.

These are the so-called decorative garden figurines and original flower girls in the form of animals, plants, houses, etc.
Perhaps, I will also include flower vases from polyurethane foam in the same category.

How to make garden figurines from polyurethane foam?

Painfully, I liked the golden vase in one of the photos below. By the way, such a vase is made simply: a jar or a glass is taken, doused with foam, and then, when the mounting foam hardens, it is painted.

With flower girls and figurines it is more difficult - first a foam base is created, then it is finished with a knife, then it is puttied, cleaned and painted. It turns out cool, and most importantly - unique.

For today, these are all crafts from polyurethane foam that interested me.

As soon as I find something interesting, I will immediately supplement the article or write a new one.

In conclusion - the traditional vidyushka. This time she illustrates the creation of interesting decorations from polyurethane foam:

Liked the article? Share the link with your friends!

Related articles:

Interesting ideas and DIY shell crafts

What can be made from wire by showing imagination

DIY apple crafts

Cool ideas and crafts from stones

What can be done from a mouse from a computer

What can be done from matches with your own hands

Easter craft for preschool children 625 x 469 37 kB jpg

Creativity 500 x 476 104 kB jpg Vir

Decorative foam kit for 600 x 464 30 kB jpg Source

Decorative foam kit for 600 x 266 16 kB jpg Source

Topics: New Year, crafts, templates 800 x 566 501 kB jpg Source

Decorative foam at 7,674 x 505 36 kB jpg

Easter craft for preschoolers 625 x 469 53 kB jpg

Easter craft for preschool children 625 x 469 49 kB jpg Vir

Easter craft for preschoolers 625 x 469 42 kB jpg

Easter craft for preschoolers 625 x 446 46 kB jpg Vir

File bookmark.pdf 316 x 500 44 kB jpg Source

Keys and houses with handles and handles 575 x 383 141 kB jpg Source

Cut the shell of the orange cut 1200 x 1200 745 kB jpg Source

Tags: harley, davidson 600 x 430 96 kB jpg Vir

READ OUT

decorative foam decorative foam

Decorative self-adhesive film 2271 x 1524 127 kB jpg Source DIY gift wrapping 1280 x 859 66 kB jpg Source Easter crafts for preschool children 625 x 469 37 kB jpg Source Photo / Needlework / Crafts for the holidays 640 x 480 · 72 kB · jpg Original ship from

plastic filler plastic filler

decorative foam decorative foam

Colored paper crafts for her 625 x 469 30 kB jpg Color paper craft source for her 625 x 469 27 kB jpg Color paper craft craft source for her 625 x 469 52 kB jpg Color paper craft source for her 625 x 469 23 kB jpg Color Paper Source Crafts

Pen for creativity Pen for creativity

Foam for creativity, hot glue 575 x 470 · 174 · kB jpg Source Set of decorative foam 600 x 464 · 30 · kB jpg Source Set "Doll with your own hands.

Girl 900 x 1200 287 kB jpg Source Set "Doll with your own hands. Girl 900 x 1200 245 kB jpg Original craft

Craft for creativity Craft for creativity

365 IDEAS ships, creative forces 604 x 503 · 73 · kB jpg Source alt doll set with hands 900 x 1200 · 299 · kB jpg Source Set "Doll with your own hands.

Precast Foam Artifacts: Manufacturing Properties

Girl 900 x 1200 287 kB jpg Vir Set decorative foam for 600 x 266 16 kB jpg Vir Set decorative

from 10. Ratings: 99.

Foam Garden Crafts

Garden sculptures and crafts from polyurethane foam

How to make a tree on the wall with your own hands from foam

Bas-relief with your own hands.

Master class on making a bas-relief "WOOD"

The secret of wall decoration Bas-relief, Master class from Alexey Pimenov clip - 2 wall relief decoration

Our project lives and develops for those who are looking for answers to their questions and strive not to get lost in a raging sea of ​​often useless information.

On this page, we told (or rather, showed 🙂) you How to make a tree on the wall with your own hands from foam. In addition, we found and added thousands of other videos for you that can answer, it seems, any of your questions.

However, if the site still does not have the information of interest - write to us, we will prepare it for you and add it to our site!
If it’s not difficult for you, please leave your feedback on how complete and useful the information posted on our website was on How to make a tree on the wall with your own hands from foam.

Kolobok from polyurethane foam

Each owner of his site wants to make it beautiful, unusual and cozy. In order to bring this idea to life, we suggest trying to make a craft sculpture of a bun with your own hands from polyurethane foam and improvised materials.

How to make a kolobok?

First of all, stock up on everything you need:

• polyurethane foam, if you are fascinated by this work, you may need more than one cylinder;
• foam gun;
• a special cleaner for hands and washing the gun from foam;
• several pairs of gloves, preferably on a fabric basis;
• a small round object (for example, a ball or even a small saucepan) that will be used as a base;
• strong wire for hands;
• thick cardboard;
• small wooden blocks that are useful for the legs;
• sharp knife.

Let's get to work.

1. We impose several layers of foam on our base, drying each well for about 15-20 minutes.

   Notice how the foam increases in size? Keep this in mind for the future. If this is your first time holding a foam gun in your hands, then we will give a little advice: there is a screw near the handle that can be used to adjust the thickness of the jet.

2. We make handles from wire. We bend it, insert it into the body of the future kolobok and foam it, not forgetting to dry the layers.
3. Foam was also used for the scarf of the kolobok. If you suddenly managed to apply it not quite evenly, then use a knife, carefully giving the desired shape.
4. From cardboard cut out the ears of the bow. We cut them into a scarf from above and, like everything else, we foam them.
5. The bars prepared for the legs are treated with foam and attached to the body of the bun.
6. Half an hour after applying the last layer, when the figure dries, cut off all the excess and proceed to the formation of the face, cutting out the eyes, nose and mouth.
7. Everything, it remains only to decorate your hero. There is a little trick here. Paint is best to choose oil. Having painted the figure twice, take it out into the street. After standing in the sun for a couple of days, the foam will settle a little, and yellow spots may appear.

   Crafts from polyurethane foam for the garden | Little Mermaid and a cat from polyurethane foam

   After such "ventilation" it is worth painting the kolobok for the third time.

8. If you want your kolobok to be bright, then after the last coat of paint dries, cover it with varnish. If you plan to create some more figurine in the future, then try to find ship varnish, because. compared to other varnishes, it gives a lesser effect of yellowness.

   But for a kolobok, any varnish for outdoor work is suitable.

This is how you can quickly and easily create a real fairy tale on your site that will delight not only children, but also adults.

From mounting foam, you can make not only crafts on the theme of a bun, but a huge number of interesting and uncomplicated sculptures that will stand for more than one year. Only, if you go out at night, do not be afraid of your creations, and do not forget to warn guests about them.

Dacha is a place where we relax and enjoy life. But decorations for the garden and yard cost a lot of money. Therefore, some owners make crafts from polyurethane foam, which are in no way inferior to expensive figures made of plastic, metal and wood.

In order to decorate your personal plot, you do not need to complete art courses and have “golden hands”. A small set of tools, a little diligence and abstract thinking will allow you to get gnomes, frogs, sheep and Christmas trees from quite affordable material.

Do-it-yourself technology for making figures from construction foam

First of all, you need to stock up on the necessary materials and tools. This will determine how well and quickly the manufacturing process will go:

• For the frame of the product, plastic bottles filled with sand, boards, metal objects and thick wire are suitable. Even an ordinary brick can become the basis for a future mushroom on its site!
• Mounting foam.
• Foam gun.
• Gun cleaner.
• If you plan to grow flowers in sculpture, then in the center of it you need to mount some kind of container such as a bucket, tin can or the same plastic bottle.
• Varnish, paint and brushes for them.
• Stationery or other knife.

The very process of creating garden figures consists of two successive processes. First, we apply foam to the base and let it harden a little. Then we apply again and so on until we approach the shape we need.

After that, with an ordinary clerical knife, excess protrusions are removed, the sculpture takes on a finished shape and can be covered with paint. The whole work can take from an hour to several days, depending on the size of the figure and the thickness of the applied layer. All this is desirable to do in a separate dry room, where there is no excess dust and children do not run.. Otherwise, you will have to wash with gasoline or acetone an extremely sticky substance, which is polyurethane foam.

Sculptures and products for the garden

Below are a few examples of different figures that even a beginner can create on his site. The main thing is to strictly follow the sequence of all operations. And in a few hours you will definitely feel like a real creator, from whose hands comes out an excellent decoration for a summer cottage!

Read more about crafts from tin cans.

Christmas tree

Making a Christmas tree out of polyurethane foam is easy. To do this, you need to collect twigs and attach them to an iron pipe. This can be done with tape or wire.

After that, it is necessary to wet the workpiece from the spray gun so that the foam “sticks” to the base more firmly.

Acrylic green paint is great for creating a Christmas mood with simple things like stick trims, twigs, polyurethane foam and fishing line.

You will find all the information about paths from corks from plastic bottles.

Ball

The ball is the easiest figure to make. It is recommended to start your creative experiments with it, and only then move on to more complex decorations and sculptures.

1. We take a can of paint and fill it with sand;
2. Layer by layer we apply mounting foam;
3. Upon reaching the required size and more or less spherical shape, we remove the excess parts with a knife;
4. We cover the product with varnish;
5. We choose the paint for our decoration, depending on our preferences;
6. If this is a bun or the head of some animal, we make eyes, a nose and a mustache from buttons, fishing line and wire.

It is possible that the material about will be useful to you.

Ram and sheep

We make a ram and a sheep:

1. First, let's make a frame. We take several plastic bottles and fasten them with tape. It will turn out something like the "skeleton" of the animal. The lower "limbs" can be filled with sand to make the figure more stable.
2. Next, you can already apply foam. But to save it, it is better to wrap the frame with isolon or other polymeric material. The first layer of polyurethane foam - you already have a rough idea of ​​​​what will happen in the end!
3. We make ears from pieces of skin. You can also make them from plastic bottles by preheating and bending them.
4. We process the muzzle with a knife, carefully giving it the necessary features.
5. We cover the product with varnish.
6. With paint we draw eyes, a mouth and other "features" of our sheep or lamb!

Scheme for making sheep.

Goat

Step by step how to make a goat:

1. We make a frame of thick wire, with which we wrap several plastic bottles.
2. As a frame for the legs (bones), it is better to take metal pipes. They can be welded to a pedestal, dug into the ground, or secured with bolts. Your figurine must endure wind and rain, so be sure to securely fasten the base.
3. We apply one or two layers of mounting foam.
4. We make horns and a tail from wooden sticks or plastic cuts and fix them.
5. After applying the last layer, cut off all unnecessary and wrap the product with a sickle or fishing line.
6. We cover the surface with a primer and paint. You can choose any color, because it is completely your creation!
7. We make eyes from buttons.
8. We place our goat next to a pond, in a clearing, in the company of other decorations, etc.

In total, this sculpture will take from one to two weeks to make, as each layer of foam must harden. As a result, from unnecessary pipes, plastic bottles, wire scraps, other "garbage" and several cylinders of mounting foam, you get an excellent decoration for your summer cottage!

What is a plastic curb for tracks will tell you.

Crafts for the New Year

Even if you don’t have anything on hand except a wire and a can of mounting foam, you can create a great decor for the New Year. Various ornaments, Christmas decorations, simple and complex figurines - all this is accessible and simple!

For example, you can make a snowflake. We take a wire of such thickness that it can be bent without effort. We make the frame of the future snowflake out of it. Gently apply one or two layers of foam. While it has not hardened, we achieve even and smooth surfaces. If something goes wrong, you can always add a little foam and cut off the protrusions with a regular clerical knife.

The Christmas ball is made even easier. Tennis ball covered with foam. After hardening, we apply a layer of paint and decorate our New Year's toy in bright and positive colors!

A simplified version of the Christmas tree is made using cardboard or isolon, wound on a rigid base in the form of a cone. Even a child can apply several layers! We level the surface, paint and put it in a prominent place.

How to make a swan from a tire is set out.

Basic rules for working with mounting foam

• Shake the bottle periodically.
• The ideal temperature for work is room temperature.
• Mounting foam does not like direct sunlight. Therefore, it is necessary to work in the shade, and cover the finished product with paint.
• The setting time of the foam will vary depending on the manufacturer, temperature and speed of operation.

Important Points

• The paint with which the finished product is coated must not contain nitrocellulose. Otherwise, the mounting foam will soften and the decoration will lose its shape.
• Gloves are a must. Without them, washing hands will take much more time than the process of making crafts.
• Polyurethane foam is a very light material. Therefore, heavy objects must be placed inside any product made from it. It can be a jar of sand, a plastic bottle filled with water, an iron base, metal pipes fastened with wire, and other massive things.

Video: garden decor master class

This video shows a master class on how crafts are made from construction foam:

Conclusion

You can give your summer cottage beauty and originality without spending a lot of money on it. Foam crafts are easy to make, non-toxic, and come in a variety of shapes. Starting from a simple ball and ending with figures of animals, birds, gnomes and even people!