How to stack firewood in a woodpile, storing it. How to make a woodpile for firewood with your own hands How to make a woodpile from firewood

In the private sector, preparation for the heating season begins in the summer. This includes preparing and finding a place to store a large amount of firewood. For this, the owners equip a separate room, part of a room or yard. And so that the firewood always remains dry, and also in order to save space, you can build a compact, convenient woodpile with your own hands. Its production will not require large expenses, and the benefits will be noticeable immediately.

Why do you need a woodpile?

It serves to protect firewood from precipitation and ensure good ventilation. The shape and size of the structure can be any, but the location must be chosen carefully so that in the middle of winter you do not have to walk across the entire site for firewood. Its correct installation is a guarantee that the fuel for a wood-burning stove or fireplace will be dry at all times, will not become damp, or become covered with fungus.

The woodpile in the country is also used as an element of landscape design. Made in the shape of an unusual figure, an animal, or a table near the barbecue, it will become the highlight of the estate.

Where is the best place to place it?

The location for the structure is selected taking into account the region, the area of ​​the yard, the type and duration of storage of logs, and the required level of drying. Woodpiles are:

• street;
• portable;
• indoor;
• stationary.

Photo: woodpile combined with toilet

Outdoor buildings and separate indoor spaces are popular. Let's look at them in more detail.

On the street

A smart solution would be to locate an outdoor woodpile next to the house, along a paved path, to make it convenient to replenish supplies in rainy weather. If wood is needed for cooking meat on a grill or barbecue, then it is better to place the logs next to them.

In the case where the structure serves only the role of decorating the estate, it should be placed in the recreation area.

An important advantage of a woodpile is saving space. So, a cubic meter of chaotically thrown logs will take up 2–3 m2 of a yard, and in a building 2 m high it will be possible to place the same amount of firewood, occupying only up to a meter of territory. In addition, it is much more convenient to take an armful of stacked logs than to bend over and take them from the ground every time.

You shouldn't make the woodpile too low. The bottom row is completed with waterproofing material or a raised flooring is made.

In room

An equally convenient option is to place the structure directly in the house and decorate it as an interior detail. An example of such a solution is shown in the photo.

You can equip a separate shed for firewood. If logs are needed to heat a bathhouse or sauna, then during the construction of these structures a niche for firewood should be provided inside.

In closed gazebos equipped with a fireplace, the woodpile is made small so that it does not clutter up the space.

Selection of material for making the frame

The shelf life of the wood and the percentage of its drying depend on the quality of the created product. Therefore, before you begin assembling the main parts, you should draw up a detailed drawing of the future structure. The image will allow you to see and correct possible shortcomings on paper in a timely manner.

You also need to consider the material for the base. The service life of the product and installation features depend on the type chosen.

Metal

Using metal as a woodpile material has several compelling advantages. Among them:

• long service life;
• resistance to environmental influences;
• Beautiful design.

One option is a woodpile made of aluminum profiles. It can be done in a few hours. It will be light, so it will be convenient to carry it from place to place.

An interesting solution is a product made of iron or steel. To build it, you need to know how to operate a welding machine, and purchase the material in a store. If opportunities allow, then it’s worth drawing a picture of the future design and turning to specialists for help.

Tree

It is in greatest demand among owners of country houses. Often, every yard has leftover wood building materials, so a woodpile will be inexpensive because it can be made from existing raw materials. Beams, boards, bars will do.

In addition to the low price, among the advantages of a wooden woodpile are:

• quick assembly;
• the possibility of manufacturing a portable structure;
• a light weight;
• long service life;
• efficiency;
• neat appearance.

This material requires pre-treatment and periodic maintenance, since it is not resistant to moisture and insects.

A typical woodpile is a canopy. Consists of a frame, roof, one or two walls. The last element is made of boards or lathing with thin strips for better ventilation. Slate, polycarbonate, metal sheets, awnings, and polyethylene are used for covering. Laying a foundation for a canopy is not necessary.

The building must be placed in such a way that the firewood located in it has constant air exchange and a minimum percentage of humidity.

The procedure for stacking firewood in a woodpile

Proper stacking of logs in tiers will extend their shelf life and ensure dry wood.

1. Firewood is stacked close to each other - in a stack.
2. If this is an outdoor woodpile, then it must have a stable frame. Otherwise, it will need to be placed next to the fence and other buildings so that the logs do not scatter.
3. The structure should not have a height of more than 2 m - it is inconvenient to get firewood from there. Its optimal height is 1.5 m.
4. The lower tier is formed from the smoothest and longest blocks and dies.
5. You shouldn't fill the woodpile with a mountain. Excess weight leads to deformation of the structure.
6. Firewood is placed on a prepared base made of bricks and wood.

If you ignore the advice, the consequences of improper installation will be a damaged woodpile and scattered firewood.

Making a frame for storing firewood

For self-construction, you need to prepare materials and tools in advance so that during the work all accessories are at hand. You will need:

• a circular saw;
• screwdriver;
• roulette;
• hammer;
• wood screws;
• boards 3 cm thick, 11–15 cm wide.

Since the woodpile is made of wood, it is better that the area under it be made of brick, concrete, or tile. This way the structure will not rot. When the base is ready, you can begin assembling the frame.

The boards for it are pre-sawn to the designated length:

• 2 pcs. 3 m each (base);
• 4 things. 1.5 m (sides);
• 1 PC. - 1m.

The latter needs to be cut into 4 parts of 25 cm each. These parts will be useful for creating transverse structural elements. Next, all elements are connected to each other with self-tapping screws. The frame is ready.

To make a cover, it is important to lay the last rows of firewood on a slope.

Wave slate 1.13 m wide or thick polyethylene film are suitable as roofing materials.

Assembling a woodpile without a frame

If you don’t want to make supports for the storage, then you can be patient and lay out the blocks in the form of some kind of figure.

The laying technology is as follows:

1. The first 3 rows are tightly packed together.
2. The next row is formed perpendicularly. This little trick will raise the edges and prevent the wood from spilling.
3. 2 more rows are done in the standard order.
4. The last row goes perpendicular.

As a result of this alternation, a semicircular woodpile is obtained.

Features of laying round firewood

This form of the product is more suitable for decorating a site than for long-term storage of firewood. In these structures, laying is done directly on unprotected ground, which is why the firewood quickly absorbs moisture, becomes damp and rots.

But if you decide to make a round woodpile, you should think about the base for it. The most inexpensive would be polyethylene film flooring.

The diameter of the building is selected individually, depending on the amount of firewood and space on the estate.

The support of the structure is a pin that is driven into the ground. A rope with a stick is attached to it. Using such a compass, a circle is drawn within which the masonry will be carried out.

Logs need to be laid systematically. They should be the same size and fit snugly together.

Formation is carried out in rows around the perimeter of the circle. The frame for this is being built.

The result will be a structure in the form of a tower or barrel.

Video: master class on assembling a woodpile

Photo gallery of finished products

The structure performs a decorative function on the site. It was given the appearance of a fairytale house.

The fireplace wall is filled with firewood. This placement gives the room a cozy look, and firewood is always at hand. In addition, wood looks great as a finishing material.

An original solution of concrete rings allows you to compactly stack logs and decorate your garden area.

The mobile woodpile is only gaining popularity. It's good because it doesn't take up much space. The colors are determined by the interior design.

Design ideas

Each owner decorates a firewood storage facility according to his imagination and capabilities. It doesn’t matter whether it is in the yard or in the house.

A small forged woodpile will serve as a bench or chair.

If you stack the firewood outside the house on a pallet and equip it with boxes on top, you will be able to compactly place things in these boxes, and protect the firewood from precipitation and moisture.

Barrels are also used as woodpiles. If you have a lot of barrels, then keep in mind that they will make an original divider of the estate into zones. Concrete well rings are used according to the same principle.

A niche for solid fuel near a fireplace or stove would be appropriate.

Small logs can be collected in bundles, decorated with colored ribbons and stacked in several tiers.

There are no limits to the decor ideas for such structures, because each owner is guided by his own preferences, the free area of ​​the site or room, the volume of material for the firebox, and a woodpile made independently will become an author’s work in a single copy.

A woodpile for firewood is in demand in dachas and private courtyards where there is stove heating. It is convenient to store logs for the fireplace and barbecue, but the design for such cases is made in reduced sizes. They even make decorative wood burners that serve as interior decoration.

What is a woodpile for?

The direct purpose of the woodpile is to protect firewood from precipitation. For large amounts of fuel, woodsheds are erected in the yard. Small structures for current use are installed directly next to the fireplace, stove or barbecue. If you place a woodpile in the yard beautifully in the shape of a tree, bird or animal, it will become part of the landscape design.

Storing logs in bulk on a site brings the following inconveniences:

1. Chaotically scattered logs take up a lot of usable space.
2. The fuel will always be damp. The wood will become covered with fungus and become rotten, which will significantly reduce the combustion temperature in the stove.
3. A mound of logs prevents normal human movement around the yard. Children playing can get injured.

Eliminates all inconveniences. The fuel will always be dry. It will be convenient to take the logs for further use.

Rules for choosing a location

To ensure that the woodpile in the dacha does not interfere, you need to choose the right place for it. Depending on the purpose, the structures can be outdoor or indoor. Based on their dimensions, woodsheds are divided into stationary and portable structures.

On the street, it is reasonable to place the woodshed near the house if the fuel is intended for heating. It is important to provide a hard surface for the path, otherwise you will have to wander through the mud every day in the fall to get firewood.

Important! It is impossible to attach a woodpile closely to the wall of a wooden house. Firstly, the design is fire hazardous. Secondly, pests living in firewood will move onto the wooden wall and destroy it.

Logs for barbecues are stored in small woodsheds. Outdoor structures are located directly next to the barbecue or Russian stove. In order to decorate the site, beautiful woodpiles of firewood are erected on the territory of the recreation area. The woodcutter simply plays the role of decoration.

In addition to convenience and beauty, the street design saves usable yard space. Ready-made logs from 1 m 3 of round timber in a scattered state will occupy up to 2 m 2 of territory. The logs in the woodpile can be placed on an area of ​​about 1 m2. Outdoor woodburners are always raised from the ground on a pallet so that the bottom row does not attract moisture. It is allowed to lay logs without a pallet, but instead of it, waterproofing material is placed under the first row.

If there is a fireplace or stove inside the house, you cannot do without building a second woodpile. It is made stationary using an attached structure to the wall. A good option is to arrange a niche. If there is not enough space for a stationary model, a mobile version is placed near the firebox. The structures are given a decorative shape and finish. Forged and wicker woodpiles are considered the most beautiful mobile products.

The internal location of the woodshed can even be arranged in a barn or under a shed. In this case, the decorative nature of the design is not important. It is convenient to store fuel for the sauna inside the shed. Owners of closed gazebos will definitely need fuel for a fireplace, Russian stove or barbecue equipped with a hood. There is not enough space here for a large woodshed. The best option is a mobile design that can accommodate the required amount of firewood for one load. The bulk of fuel is stored outside or inside a shed.

How to make a woodpile with your own hands

The woodpiles shown in the photo should not be viewed only from a decorative side. Ease of use, fuel safety, and fire safety depend on the quality of the design. They first think through the shape, size, what material the roof, racks, and pallet will be made of.

Advice! A hand-drawn drawing will help simplify construction. Using a sketch, it is easier to visually imagine the appearance of the future structure, make adjustments, and calculate the consumption of building materials.

Woodpile made of metal

The most reliable woodpile will be made of metal. The design has a number of undeniable advantages:

• long service life;
• strength;
• aesthetic appearance.

Metal woodpiles are made taking into account future use. If frequent movement is expected, it is reasonable to assemble the frame from an aluminum profile. The design will be lightweight, but suitable for storing a small amount of fuel. Aluminum profiles are less elastic than steel. A large mass of firewood can deform such a structure.

The frame of large woodsheds is made of steel pipe, profile, channel. The walls are sewn up with mesh. Indoor mini woodpiles are made from forged elements, giving them a decorative effect.

Wooden woodpile

The easiest way is to make a woodpile with your own hands from wood. The classic design is a frame with a roof. The racks are installed from timber or thin round timber. A board with a thickness of 50 mm or more is suitable. A grating is installed approximately at a height of 200 mm from the ground. You can simply put old pallets under the firewood. The roof is made of lightweight material. Corrugated sheeting or a budget option - roofing felt - will do.

Firewood must be constantly ventilated. If walls are provided in the woodpile, then they are constructed with gaps up to 10 cm in size. A foundation for a wooden structure is optional. It is enough to install the frame on cinder block substrates. A concrete base will be needed for a capital woodpile in the form of a full-fledged barn.

Woodpile for fireplace

Often, when building a fireplace and a Russian stove, the design includes a niche for firewood. The window is located inside the brickwork next to the firebox. Nisha plays the role of a woodpile. If there is no such window near the fireplace, a separate structure is provided for firewood. The mobile woodpile is always in sight. In addition to ease of use, much attention is paid to decorative functions. The woodpile should fit into the interior, become a part and addition to it.

Forged products are considered a universal option. In modern style, the woodpile is made from curved sheets of steel. Wicker baskets are no less beautiful, but their service life is short with frequent use.

Decorative woodpile

Firewood is stored in a decorative woodpile for a real fireplace or a dummy. For this design, the purpose of the logs does not matter. The emphasis is on decorativeness. A forged product will suit any interior. The option with a lattice bottom looks more beautiful. However, the disadvantage is that wood dust constantly spills onto the floor. The forged model with a solid bottom looks no less original, and in addition ensures cleanliness.

Needlewomen love to decorate their homes with wicker woodpiles. Bags made from thick cord look original. The basket can be sewn from thick fabric of the appropriate texture. It is advisable to use materials that are resistant to combustion. Decorative baskets for firewood are woven from wicker and covered with stain and varnish.

Even wooden boxes can serve as a decorative woodpile. Containers are used for storing small amounts of firewood in country houses. The boxes are equipped with wheels, patterns are burned on the walls, and they are opened with varnish.

How to properly stack firewood in a woodpile

Considering the type of construction, the stacking of firewood in the woodpile occurs according to a certain pattern. You can’t throw blocks of wood randomly. A large amount of firewood under its weight can squeeze out even the strongest walls.

How to stack firewood in a round woodpile

The stacking of firewood in the round woodshed begins in a circle. The first row is the base of the entire pyramid. If the firewood is laid unevenly, the next rows will become skewed. Loose laying threatens subsequent subsidence of the upper rows.

Attention! When laying out the first row, it is important not to go beyond the contours of the circle. The edge of the waterproofing or flooring will serve as a guide.

The logs above the first row continue to be laid in a circle until the height of the wall reaches 50 cm. You should get a well. If the logs are short, the wall is laid out in two rows. Further actions are aimed at filling the internal space with firewood. The logs are simply laid tightly without a specific pattern.

When the height of the inner part and the wall is equal, the firewood is again laid out in a circle to a height of 50 cm. The cycle continues according to this pattern until the maximum permissible height of the woodpile is 1.5 m.

The roof frame is also made of firewood. First, a raised platform is made from logs in the center. Cutting boards are used to form a slope in the shape of a hut. The top is covered with reeds, hay, straw and all this is pressed down with thick logs so that the roof is not blown away by the wind.

How to properly stack firewood in a woodpile

The most common scheme is stacking logs in stacks. The logs are placed in parallel rows on top of each other. The structure turns out to be shaky. The scheme is optimal for a woodshed with a stop. It can be the wall of a neighboring building or its own lattice.

When stacking firewood, the elevated rows are constantly monitored. They should create a slope towards the supporting wall. This arrangement can be achieved if the inner rows are laid out with thin logs, and thick logs are used for the outer masonry.

Advice! If the firewood stacked in stacks tilts in the opposite direction from the thrust wall, from the outside they try to insert linings from boards into the masonry or drive thick stakes with a hammer.

On a free-standing woodpile, emphasis can be placed on the sides by installing supports made of timber or round timber. You cannot build a firewood pyramid that is too tall or thick. Under the weight of the logs, the middle of the masonry will be squeezed out, which threatens the destruction of the entire structure.

How to stack firewood in a woodpile with stake supports

If there is no support for firewood from a neighboring building, the woodpile is reinforced with stakes. A thin round timber is dug into the ground, forming 4 corners. The pillars are buried so that they do not bend. Firewood is stacked with each row reinforced with thin tree branches. They will not allow the masonry to move apart. The branches are harvested with a fork at the end. This part covers the supports. The flat section of the branch is pressed down with firewood. The logs are laid with a bandage - a cage. The top of the woodpile is covered with roofing felt or any other waterproof material.

Conclusion

The woodpile can be laid out even without stops. Their role will be played by columns of logs, folded at the edges into a square with a bandage. The internal space is filled with firewood.

When arranging any type of woodshed, it is important to create a stable structure. The rows should not spread out when storing firewood and when taking it for burning.

Related Posts

There are no similar entries.

Stove heating of the house, solid fuel boilers, baths require a supply of high-quality, dry firewood, compactly stacked near the house in a woodpile. Orderly stacked firewood does not spoil, is always at hand, and does not spoil the appearance of the site. It is better to choose a storage location in advance, before the firewood is delivered. Unloaded nearby, you won’t have to carry them far. The chosen location must have good drainage; split wood does not store well in dirt. If firewood is used quickly, it is better to store it near the wall of the house; if long-term storage is planned, insects and rodents, which often hibernate among firewood, can find a loophole in the home.

Firewood with stakes - a simple solution

It is convenient to arrange a woodpile adjacent to the wall of a house, fence, or outbuilding. A layer of stones or bricks is laid between the firewood and the ground as an insulating layer. It is convenient to put fuel on a wooden pallet or a specially made grid of stakes and fittings. The stacked firewood is supported by stakes driven into the ground, forming a quadrangle. One of the ends of the stacked logs rests against a wall or fence, the other faces outward. The stakes that serve as support must be thick enough so as not to bend under the weight of firewood.

A kind of reinforcing reinforcement for the firewood shed is made using tree branches with forks: the forks are covered by stakes, and the branches are pressed against the next layer of firewood. Stability of the woodpile is also given by laying it not in a row, but alternately - in a cage. The rows are built up to the height of a wall or fence, and the firewood is covered on top with waterproof material - oilcloth, roofing felt, tin.

When a woodpile is formed along the fence, a few centimeters must be left between the firewood and the fence for ventilation. This secret will keep the firewood dry.

If long, strong stakes cannot be prepared, the method of stacking firewood can help maintain the stability of the storage area. In the corners of a rectangular firewood box, logs are laid in a cage, forming columns. Between them the firewood is stacked in a simple manner.

How to fold a round woodpile?

If the supply of firewood is very large or it is not possible to set up storage near the wall, you can put the firewood in a compact round woodpile in an open place. Folded correctly, it resembles a lush haystack. The beveled laying of logs ensures rainwater drainage. The round shape of wood storage has long been used in regions of Russia rich in wood that use stove heating.

In the USA, a similar method of stacking firewood is also common; it is called Holz Hausen - “wooden house” from German. It is compact, convenient, compact. The latter quality is the main advantage of this type of woodpile - a lot of firewood can be stacked in a small area, it dries faster than in traditional storages, the stacking is durable, and the structure will not fall even under extreme wind loads. The beehive shape is considered by many to be more attractive than the traditional rectangle, and it is also fun to build.

For beginners, it is better not to make the first round woodpile too large in diameter. You need to choose a place for it that is sunny and well ventilated. Under the first row of firewood, a drainage base is made of gravel or a layer of tree bark. The correct radius will be provided by a cross made of long stakes.

Constructing the foundation

First, lay out the ring in a circle, empty in the center. It turns out to be a closed chain of chocks with their ends touching. The next layer, laid across the first, is tilted in the middle: adjacent logs or logs touch the side surface, the ends remain free.

The center is also empty; gradually it forms a pipe, which promotes good air exchange and drying of firewood. If the rows lose their internal slope due to the uneven thickness of the chocks, transverse supports are placed along the edge, like a ring supporting the edges of the first row. This will give the structure stability and stability.

Increasing the height

The stakes placed crosswise between the rows at the same height form the “floors” of the woodpile and support it. When the woodpile reaches a height of about a meter, you can throw logs in random order into the empty middle. Gravel will protect them from moisture, and loose laying will not impede air circulation. This inner layer makes the structure more stable and helps save space.

Advantages of the cylindrical shape:

• firewood dries quickly and evenly even in areas with short summers;
• the resulting circles are very stable; the pressure in the circle is even at each point, adjacent lumps support each other, and when laid correctly, the drying wood “sets” even more firmly;
• The cylinders look beautiful and use space efficiently, allowing a large amount of firewood to dry in a limited area.

The holz hausen ends with a top of the flattest chocks that form the roof. They can be covered on top with a layer of waterproof tree bark.

Another way to form a round woodpile is to use a high pole, buried in the center of the future circle, instead of a cross. It is so convenient to maintain the correct shape; the pole creates additional support for the central part of the structure.

The woodcutter's design formulates the rules for storing firewood: drainage under the bottom layer, good ventilation and heating by sunlight, a canopy or roof.

Woodshed - storage under the roof

If open storage of firewood is not suitable for you, then you should think about building a woodshed on your summer cottage - a structure with a roof. With the help of your imagination and available materials you can create a real masterpiece. You can see some of them in the photo:

Stove heating has a special winter magic. If the firewood is stacked and dried correctly, then using it will be a pleasure!

A woodpile for firewood is an excellent option for storing firewood neatly and tastefully, while providing them with optimal storage conditions. By choosing a beautiful woodpile, you will be satisfied with the result of your own labor. If you intend to provide or use bathhouse, , it is assumed that there is a need for a supply of dry wood, which will be compactly stacked, and a woodpile for firewood is the best solution that will come to the rescue in this case. Organized stacking of firewood will not only ensure long-term storage, but will also make the site look attractive. In order for everything to go as you planned, you need to take care in advance about choosing a storage location.

The Importance of a Woodpile

The space set aside for drying firewood will greatly simplify the task of the home owners. A specialized shed or . If it is not possible to make the storage area in the best possible way, then you will need to make efforts to create a woodpile on the site. In addition to the function of discharging for drying and creating conditions for storing firewood, the woodpile can also be used in, for this purpose a special beautiful laying of the structure is used.

Advantages of a designer woodpile

• Functionality and practicality - you don’t have to walk across the entire site to bring firewood.

• In winter, the element can act as a barrier, so the time spent clearing snow will be noticeably reduced.

• Optimal aesthetic function will allow you to achieve colossal results in terms of.
• A beautiful woodpile can be another structure and act as a base for a table used in.

The woodpile has a wide range of functions and tasks, so it can easily be used everywhere.

We fold a regular woodpile

Folding the structure with your own hands will provide you with an excellent option for relaxing and living in, and the time spent on construction will be as short and efficient as possible. You can make a woodpile for firewood (there is a full video on the Internet) with your own hands. Let's consider the step-by-step process of performing the most typical common design.

Materials, tools

To fold the product yourself, you will need several tools.

• Carpentry plan clamp for convenient work;
• A circular saw;
• Hammer;
• Tool for working with screws;
• Wood nails;
• Tape measure for measurements.

Boards for the implementation of the frame

• 2 elements of 3 m each, each 3 cm thick, 10-15 cm wide - they are necessary to create the base.
• 4 products 1.5 meters long with similar width and thickness parameters - they will serve as side parts.
• 1 board with a length of 1 m and a thickness of 3 cm, this product will have a width similar to previous boards.

After the preparatory work with the materials, you can begin the main process.

Preparation of the site structure

1. Choose a place to install the woodpile: you should pay attention to the concrete bases, if available; if not, you can lay out a flat area of ​​red bricks.
2. Using the element laid out in the previous paragraph, you can protect the boards from rotting, which can occur when the ground and lumber come into contact.
3. After preparatory work with the base, you will need to move on to folding the woodpile frame.

   Thus, a do-it-yourself woodpile for firewood is a very profitable and interesting option if you follow the technology and nuances of its reproduction.

   Frame: subtleties of work

   1. The meter board is sawn into 4 parts, each 25 cm long - these will make up the cross members of the frame.
   2. If the length is made shorter, then the boards must be shortened and have a length less than that of the material being laid.
   3. At this stage, the complete assembly of the finished frame structure follows, followed directly by the laying of the woodpile.

      Laying technology

      This process is no less important than the previous operation. The degree of stability of the structure and its service life depend on the proper placement of logs.

      It is important to know! To avoid problems and obstacles, it is necessary that the logs lie tightly to each other, while the longest and most even lumber is laid out in the lower part.

      The maximum height of the woodpile is 1.5 m; in the upper area you can put it, which will have a height of 20 cm, no more. During the installation process, it is important to monitor the fact that the structure is strong and stable. If the logs have a deforming effect on the frame, there is no need to risk it; you can remove the excess boards. Loose stacking of materials will sooner or later manifest itself, especially after the firewood dries out, because this factor will provoke a decrease in its volume and the formation of voids, due to which the entire building may collapse.

      Thus, we looked at how to stack firewood in a woodpile, and made sure that there is absolutely nothing complicated about it.

      Methods for storing firewood

      Firewood can be stored in several ways; let’s look at the 3 most common options.

      • Storing products outdoors;
      • Carrying out the process under ;
   4. Two-row or more structure;
   5. Woodpile for firewood is round;
   6. Straight design along .

      Regardless of the method and type of construction, any installation requires compliance with general rules to ensure the safety of the options.

      • Laying must be carried out on a pre-prepared base. Traditionally it is made from wood, brick material.
      • On top of the woodpile there should be an additional layer of protection made of bark, hay, synthetic materials and structures. It is important that this factor does not interfere with ventilation.
      • The product should not be placed in a place exposed to direct sunlight or where there is no sunlight at all. The main thing is that the chosen place is easily and well blown by the wind.
      • In the process of folding the product, it is important to take into account additional reinforcements, otherwise any work may be in vain. To supplement, tree branches, stakes and sticks are used.
      • It is important to maintain a convenient approach to the woodpile and the possibility of unhindered access, regardless of the time of year or day. Be sure to take fire safety measures into account.

      A woodpile, a photo of which can be found on the Internet, is an interesting structure that requires a special approach and knowledge to design and construction.

      Laying firewood: technique

      If you do not have your own experience in stacking firewood, there is no need to build large woodpiles; in this case, you should start with small structures. Knowing how to do this correctly, you can not only maintain the quality of the wood, but also create an aesthetically attractive building on the site, making it more attractive. A responsible approach to storing firewood is an easy and fairly quick process if you know the techniques for performing the work.

      Shed for firewood: creating harmonious details

      • Ease of operation of the design;
      • The beauty of the appearance of the structure;
      • Possibility of quick disassembly and assembly;
      • Ease of transporting the product;
      • No need to lay a foundation;
      • Metal is used as a base.

      The main requirement when constructing a structure is a good degree of drying of the material used. In some cases, you can use metal structures, which also have durability, resistance to gusts of wind, and an aesthetic appearance.

      Setting the level

      This point is one of the most important when constructing a canopy. If an irresponsible approach is taken to this issue, the design will become crooked and become unusable prematurely. The same applies to if you choose a ready-made woodpile for firewood, it will not be difficult to buy it, but it is important to choose the finished product and design wisely.

      Thus, a do-it-yourself woodpile for firewood (photos can be viewed on the Internet) is quite simple to build and has many advantages in contrast to a purchased finished product. By taking a disciplined approach to designing your space and creating your piece, you can “kill several birds with one stone” and be truly proud of the work you've done. A wide selection of materials and ready-made solutions will provide you with the right approach to any task in a matter of hours.