Do-it-yourself drawings of homemade products. We make useful homemade products for a summer residence

A summer cottage is the territory where you can give yourself the freedom to conduct numerous experiments and dream up plenty. This is manifested not only in interior design, but mainly in the design of the garden or vegetable garden. Inquisitive and resourceful owners have not been guided by expensive and standard methods for arranging their sites for a long time, since there are many alternative solutions for virtually all areas of activity.

There are several varieties of vertical beds that allow you to optimize the use of free space. Custom designs - a great opportunity to create an interesting design of the garden, vegetable garden, summer cottage.

This type of beds is in most cases used for growing ornamental plants or herbs.

Materials for manufacturing:

The length of the drainpipes is adjustable in accordance with the wishes of the owner of the site. However, bulky beds should not be made, as they can complicate movement around the territory.

Creating a bed

Stage 1. Create a container. To do this, we take a drainpipe, cut it in two lengthwise and put on special plugs on both sides.

Stage 2. We take the prepared metal holders, put them on the resulting frames for the beds.

Stage 3. We make holes in the pipe. They are made in those places where there will be metal fasteners.

Stage 4. We pass a cable or a strong rope through the holes made.

Stage 5. We fix the cable / rope with fasteners.

Stage 6. We fill the resulting beds with expanded clay and soil.

Stage 7. We plant plants in the beds.

Stage 8. We hang pipes to the chosen place. Sometimes a special wooden crossbar is placed for this, more precisely, a design in the shape of the letter “P”.

Step 9. Alternatively, you can make a special design for the pipes.

Important! A drainpipe bed is not resistant to strong gusty winds, so you should choose a place for it that is not blown from four sides by winds. Otherwise, the frame will quickly collapse, nullifying all your efforts.

A bed made from a plastic bag is another modification of vertical beds. It is extremely compact, functional and interesting in appearance. You can make such a bed in a couple of hours.

Materials for manufacturing:

• durable polyethylene film;
• sewing machine;
• priming;
• seedling.

In order for the bed to turn out to be strong, it is recommended to pay special attention to the thickness of the plastic film, which in this case will act as the "frame" of the structure. The minimum film thickness is 0.2 mm.

The process of creating a polyethylene bed

Step 1 . We cut out 2 rectangular pieces of film, the size of which corresponds to the size of the created beds. An allowance of one and a half to two centimeters should be left on each side. The recommended diameter of the beds is twenty centimeters.

Step 2. Sew the rectangles together, leaving only the top of the bag unconnected.

Step 3. We sew a handle to the future bed, the strength of which will withstand the weight of the bag filled with soil. It should also be noted that when watering, the weight will increase.

Step 4. Fill the bag with fertilized soil.

Step 5. We make horizontal cuts on the bag in increments of twenty centimeters. They are necessary in order to plant seedlings in the garden.

Step 6. We plant seedlings.

Step 7. Water the soil regularly and add the necessary fertilizers.

With these simple steps, you can get a cheap and useful garden bed.

An integral element of each suburban area is a compost heap. This is the place where all kinds of biochemical reactions take place that ensure the creation of fertilizers.

To create fertilizers that will satisfy all the requirements for them, several key steps should be carefully considered: creating a container and directly making the compost itself correctly. Let's talk about each of them in more detail.

Stage 1. We take eight supporting posts of the same length.

Stage 2. We process the lower part of the wooden posts with engine oil or tar.

Stage 3. We dig the posts into the ground so that they are reliable and stable. If the compost bin is located next to the fence, then 4 posts (that is, one side) can be attached to the fence. This will avoid having to dig 4 holes.

Stage 4. Between each two adjacent columns we nail the crossbars in such a way that in the end we get three independent sections. Be sure to leave gaps that will serve as ventilation holes.

Stage 5. In two sections, horizontally nail the boards to half the height of the pillars. In these places, it is planned to create two small doors.

Stage 6. There will be a large door in the remaining section, so only one board should be nailed. It should be located at the very bottom in a horizontal position, that is, like a regular crossbar.

Stage 7. Install the covers. To do this, you can use one large solid board.

Stage 8. We install the doors prepared in advance.

Stage 9. We provide doors with handles and latches.

Stage 10. We process wood using special impregnations.

Stage 11. We paint the box in any color that matches the preferences.

Many gardeners mistakenly believe that any components can be dumped into the compost heap. In fact, in order to create the right biofertilizer, the “ingredients” must be carefully selected.

Among the mandatory components of the compost heap are the following components:

• peat;
• ash;
• needles;
• tree branches;
• leaves;
• hay or grass;
• wood ash;
• plant roots;
• raw vegetables and fruits, etc.

All elements are randomly mixed in the heap. To speed up chemical reactions, it is recommended to cover the pile with a tarp (this is especially true in the absence of a box).

Trips to the country with the family suggest the presence of entertainment elements on the site that will delight children. The most common way to occupy young summer residents is a swing.

Building a swing yourself is not an easy task, but quite doable. Of course, you can always take a stick, tie it with a rope and hang the structure on a tree, but this can hardly be called a full-fledged swing. Real craftsmen prefer to build comfortable structures with a comfortable seating area.

Structural components:

• two logs;
• strong rope.

Indicators:

• log diameter - 85 mm;
• log length - 700 mm;
• the distance between the ropes is 500 mm.

Making a swing

Stage 1. We stretch the ropes between the logs.

Stage 2. We wrap each log with ropes.

Stage 3. We release the ropes out.

Stage 4. We tighten the ropes by 3 knots.

Stage 5. We fix the swing on the tree.

Important: such a swing is designed for only one person.

Garden path from improvised materials

There are several types of garden paths that you can easily do with your own hands.

Step 1. Remove the sidewall from the tire using a knife or saw.

Step 2. Cut the tires.

Step 3. We line the space with corrugated stripes.

Step 4. Paint the track with paint.

Step 5. Sprinkle with stone chips.

This is an economical option for those who do not want to rack their brains and spend time on a full-fledged garden path. Tire track is usually used for vegetable gardens, as it easily fits into the ground.

Stage 1. We paint the corks in different colors.

Stage 2. We dig a small trench.

Stage 3. We drive in supports to strengthen the future track.

Stage 4. We construct formwork using boards.

Stage 5. We install spacers along the edges of the trench.

Stage 6. We place crushed stone deep into the trench and carefully tamp it down.

Stage 7. We make a solution of sand, cement, glue and water.

Stage 8. Pour the solution into the trench.

Stage 9. We press the plugs in random order. Smooth multi-colored stripes look interesting.

These are the easiest and fastest ways to make a garden path without purchasing expensive materials.

DIY tools

The expression “everything will come in handy on the farm” turns out to be as relevant as possible when it comes to canisters. From this plastic container, you can make a large number of indispensable tools that are actively used in the process of country work.

To make this tool, we only need a sharp knife and a container directly.

Stage 1. Cut off the bottom of the canister.

Stage 2. We mark the cut line for the scoop on the container so that the handle from the canister is the handle of the future tool.

Stage 3. Cut off excess material.

As a result of these simple steps, we get an excellent scoop with a comfortable handle.

Materials:

Manufacturing

Step 1. Thoroughly wash the canister so that no odor remains in it.

Stage 2. We cut the canister vertically into two parts.

Stage 3. We make a groove on the plank using a woodworking machine.

Stage 4. We apply glue to the plywood and insert it into the bottom of the canister.

Stage 5. We paint the resulting shelf with a can.

Of course, this design will not withstand a lot of weight, but it is quite suitable for storing small parts.

Materials:

• 40 canisters;
• scissors;
• rope;
• paper;
• marker.

Stage 1. We pierce the top of the cans with a knife.

Stage 2. We make a stencil out of paper.

Stage 3. We apply it to the canister, circle it with a marker.

Stage 4. Cut out large holes with scissors.

Stage 5. We put the prepared canisters in several rows, tying each row by hooking the rope under the handles of the containers.

Stage 6. We tie the entire rows around the perimeter for greater strength.

Stage 7. If the cabinet is planned to be leaned against the wall, then we drill it to the surface.

Stage 8. We put heavy objects in the bottom row - stones or bricks.

The result is a fairly roomy and functional rack that will help get rid of the issue of storing many small parts.

Be resourceful and bold in implementing your ideas. Good luck!

Video - Do-it-yourself homemade products for summer cottages

Video - Do it yourself for a summer residence

It's nice to see when a person made all and other household items with his own hands. To simplify the process of cutting metal or cutting wood elements, they build home-made machines and fixtures for the home workshop. This solution saves not only time for the manufacture of products, but also money for the purchase of finished products. A few practical and interesting options are discussed below.

DIY pipe bending machine

Read in the article

How to use homemade machines and fixtures for the home workshop

The use of home-made machines and devices for the home workshop is aimed at solving several problems:

• Simplification of the metal processing process. In the course of creating household items, a metal carver or a press is often required.
• Improvement in wood processing. Even to build a small barn or make a wooden one, others are needed.

Buying a ready-made tool is quite expensive, so the use of home-made machines and accessories for the garage is becoming more and more relevant every day. Among the most common options for home tools are:

• carpentry workbench;
• device for quick sharpening of knives;
• device for sharpening metal drills;
• drilling machines;
• press;
• cutting disc machines.

Here are a few photos of do-it-yourself tools and fixtures from "homemade" ones:

1 of 4

Practical DIY tool shelves

Before creating devices, and with your own hands, determine the storage location for all devices, so that later you do not have to look throughout the workshop or where everything lies. It is not difficult to make a shelf for tools with your own hands, the main thing is to decide on its dimensions and material of manufacture.

The easiest way to make shelves is to assemble them from wood. Do not forget about the need to cover the finished structure with a protective varnish or to prevent rotting and swelling of the wood.

You can create a combined version of a metal support and wooden shelves. Here are detailed instructions for creating such a homemade model:

Image	Sequencing
	Assemble the frame. To do this, prepare two side frames, consisting of 4 corners. Connect elements with . Then, tighten 2 frames together using 4 corners.
	When the frame is fully assembled, proceed to the manufacture of shelves. They can be made from wood or metal, as well as from other improvised dense materials. It is enough to cut the canvases of a suitable size and fix them on a metal base.
	If desired, you can make the rack movable by attaching four small wheels. Or firmly install it in the allotted place in the garage.

You can find other interesting projects and drawings for making tool shelves. Watch a video on the topic:

And also make useful household appliances with your own hands:

1 of 4

We make a carpentry workbench with our own hands according to the drawings: video instructions and photo examples

Among the common do-it-yourself devices, a workbench is distinguished. Durable and dimensional, which allows you to securely fix the workpiece, it is useful for high-quality cutting of wood and creating various elements from it.

The device package includes:

1. Working surface. For it, a solid one is used to increase the life of the device. The thickness must be at least 6 cm.
2. Supports. Assembled from wooden beams or metal plates. The main task is to ensure the stability of the entire mechanism.
3. Vice for fixing the product. If the table is long, you can install two vices at once.
4. Tool box. A useful recess or pull-out design that provides quick access to the small parts you need.

To independently assemble a carpentry workbench for your workshop, you should choose a drawing, purchase material for work.

Do-it-yourself carpentry workbench drawings

Before buying materials to build your own workbench, you should think about a detailed drawing. It should include the dimensions of the machine itself, it is advisable to note the dimensions of the materials used and their quantity.

For example, a finished drawing of a folding workbench with your own hands may look like this:

Whatever model you choose to create, consider several features of the desktop that provide the convenience of cutting wood:

• the height and length of the hands of the master: the height and width of the countertop depend on these parameters;
• which hand is working: place the vise on the right or left;
• what blanks will be made: selection of the table shape;
• how much space in the room you allocate for a workbench.

Given all these parameters, it will be easier for you to decide on the drawings of the carpentry workbench and the dimensions of the machine. Here are some interesting examples:

Instructions for assembling a wooden workbench with your own hands

You can buy a wooden workbench in a store or through online catalogs, but it's cheaper to make it yourself. Let's take as a basis a simple version with typical tabletop dimensions: length - 150-200 cm, width 70-120 cm.

Manufacturing work will include several stages:

Image	What need to do
	Make the top cover from thick ones to make a shield with a width of 70 to 200 cm. Fasten the elements onto long nails, and you need to drive them in from the outside, and carefully bend them from the inside. The working surface of the workbench is made only of wood or.
	Sheathe the lid along the lower perimeter with a 5 by 5 cm timber. This will make it more convenient to mount the vertical supports. The location of the supports depends on the size of the countertop. It is better to make them from a thick rectangular bar at least 120 by 120 mm.
	The carpenter's workbench must be installed correctly. Be sure to fasten it firmly. If it will be mounted on the street under a canopy, then dig holes for the supports. Indoors, use other methods of fastening.

When the structure is assembled, place a vise on it. To fully understand how to assemble a carpentry workbench with your own hands, watch the video:

Making a carpenter's vise for a workbench with your own hands

Professional "homemade" assemble not only tables for work, but also a vise with their own hands according to the drawings. Any design of such a clamp will include several elements:

1. Supports where each has a sponge for clamping.
2. Moving clamping jaw.
3. Metal guides. A sponge moves over them.
4. Lead screw, for moving elements.
5. collar. Required to rotate the screw.

In the manufacture of homemade vise with your own hands, you can use various improvised materials. For example, there is a design option from a profile pipe. To do this, prepare several pieces of pipe of different sizes, a steel stud with a large thread and double nuts.

Instructions for creating a verstal vice from a profile pipe:

Image	What need to do
	The largest pipe acts as a body. Supports are soldered to it from below. A 3-4 mm steel flange is put on the back side. A hole for the running nut is drilled in the center, and opposite the front support there is a back sponge.
	On the inner moving part, the front steel flange. A stud is mounted in it, with lock nuts fixed to it. Thrust washers are put on both sides of the flange. The last element is a movable tube attached to the front sponge.

And also watch the video "do-it-yourself vise at home":

Do-it-yourself metal workbench drawings

A metal workbench does not differ much from a carpenter's workbench. At the heart of a rigid metal, not a wooden frame. A vise is attached to it, and the entire workbench is designed to withstand the force of a blow from a sledgehammer.

Do-it-yourself metal workbenches can have one, two or three cabinets, and also not have shelves and drawers for small parts. In terms of strength for working in a garage, you can make an ordinary table of metal up to 5 mm thick and a reinforced structure, where sheets from 10 to 30 mm are applicable.

Here are some useful blueprints for making a metal workbench for your workshop:

How to make a do-it-yourself knife sharpener: drawings and photo examples

No home is complete without a knife in the kitchen. It is rather difficult to make the correct one without special devices: it is necessary to maintain the desired angle and achieve the ideal sharpness of the blade.

For each knife, a certain sharpening angle must be observed:

1. Razor and scalpel require an angle of 10-15⁰.
2. Knife for cutting bakery products - 15-20⁰.
3. Classic multifunctional knives - 25-30⁰.
4. For hunting and camping, they take a device with a blade angle from 25 to 30⁰.
5. If you want to cut hard materials, then sharpen at an angle of 30-40⁰.

To ensure the desired angle, it is worth buying or making a sharpening device. For example, you can assemble a sharpener with your own hands.

Comment

Specialist in the selection of tools "VseInstrumenty.ru"

Ask a Question

“If you use sharpening not every day, then 1000 rpm is enough for a quality result and a long service life of the device.

"

To assemble such a machine, a motor from a “washer” with a power of 200 watts is useful. Completely to create a grindstone from an engine from the Workflow for creating such a simple device will be as follows:

• Sand the wood blocks with sandpaper to remove any burrs. Make a markup depending on the desired angle.

• Attach a stone to the drawn line to sharpen the blade. To do this, attach it to the bar and mark its width. Then, on the markings, make cuts, up to 1.5 cm deep.
• In the resulting recesses, fix the abrasive bars so that the grooves match. Then, install the sharpening stone by screwing it onto the bolts.

There are many ways to make a homemade knife sharpener. Choose the right one and try to create a convenient and useful tool for the home.

How to make a do-it-yourself tool for sharpening a drill for metal

They independently make not only a sharpener for blades, but also a machine for sharpening drills for metal. Here are some drawings to help you get started:

Ready-made home machine The simplest and most common version of such equipment for the garage is a converted drill. For work you will need:

• bed for the base;
• rotation mechanism;
• vertical stand.

For a rack, boards are usually used. The mass of the drill is small, so there is no need to use metal. In this case, the frame must be made massive in order to reduce vibration during the operation of the device.

To correctly connect the bed and the vertical stand, as well as assemble all the equipment into one whole machine, pay attention to the video instruction:

Do-it-yourself drawings with dimensions for a drilling machine

To properly make any machine or practical device for private use, you first need to make a drawing with dimensions. Only then proceed to the preparation of materials and assembly of the device.

Here are some examples of do-it-yourself drilling machine drawings from a drill:

And you can also make homemade vise for a drilling machine. Below is a video instruction for assembling such a device:

Article

Nothing brings joy to the house like a thing created by oneself. Indeed, various homemade products for the home not only fill life with bright colors, but also give the interior a uniqueness and some kind of zest. And it is certainly impossible to forget about such a thing (even if it is a small trinket). And it’s not so important that these are homemade wood products for the home, paper or plasticine. There are millions of options and methods for making various gizmos, and today we will consider a few of them. So, how to make interesting homemade crafts for the home?

Shelf of tin cans

It would seem that such a trifle - a jar of coffee. However, even from it you can make a beautiful, convenient and useful shelf for storing household items. Often, various souvenirs and memorable photographs are stored in such containers. There is little practical use for this homemade product, but such jars look very harmonious.

Details on how to make this craft

1. First, holes are punched in jars with a drill or with a special ripper (in the upper and lower - 3 each, and in the walls of all the others - 2 points each).

2. Next, the jars are fastened together. Small nuts and screws are used as fasteners. By the way, to get the desired (beautiful) result, you will need to have at least 5-6 of these jars.

3. After that, a hole for the screws is punched in the containers. In the bottom of the jars located in the upper part of the structure, 1-2 holes are made to attach the shelf to the wall. The finished homemade is screwed with a screwdriver or screwdriver. For this, dowels are driven into the wall first.

Everything, now homemade products for the home are being put into action. Be sure - various trifles in such jars will definitely not get lost. Thus, you kill two birds with one stone - decorate the interior and get rid of the mess in the house.

DIY for home - how to make a clock on a CD / DVD?

A clock on a CD is also a very interesting and original option for interior decoration.

As you can see, the design of this device is very original, and therefore it will look organically against the background of any interior (perhaps it will become its highlight). Such "smart" homemade products for the home are made in a matter of minutes. We will tell you more about all the stages below.

So, how to make a homemade clock with your own hands? To begin with, you will need to prepare the appropriate materials - a CD / DVD CD (you choose the design of its front part at your discretion) and a cover-case for it (the distance between the walls should be at least 0.05 centimeters). It is very important that the last part does not have any chips or scratches. To facilitate the work, you can purchase a ready-made watch and then simply replace the standard dial.

It must be arrow, otherwise it will not work to make a homemade product. You should also make numbers. There should be twelve of them in total. It can be cardboard, paper or plastic circles. Their thickness should not exceed two millimeters. Rhinestones can be used as decorations. You also need to prepare about 30-40 centimeters of wire, a piece of leather or fabric and Moment-type superglue. The basis of this whole structure will be a CD-ROM. We will remake it in the first place.

First you need to mark the disk into twelve equal parts and stick numbers on the marked points. In this case, the sectors should not go beyond the outer diameter of the device. How are homemade products made for the home? After the sectors, we proceed to the clock itself - remove the arrows and place them exactly in the center of our disk. By the way, before fixing them, you can stick some interesting photo on the disk, which will make the design of the watch even more original.

To increase the size of the arrows, use thin metal strips. To achieve the desired result, it is enough to apply glue to them and carefully position the part evenly over the entire surface of the leading elements. The very same mechanism of the arrows is attached to the reverse side of the disc.

What to do next?

So, the base of the clock is almost ready. The next step is to make holes in the device along the contour of the arrow mechanism. The box of this disc is installed in a case. The mechanism itself is brought out through the hole and tightly closed. Now, with the help of a wire, an emphasis is made, which is glued to the back cover. To make it more durable, glue a piece of fabric or leather on top of it. This will make the emphasis not only strong, but also beautiful, since the excess part of the wire no longer gapes on the clock as before. Everything, a homemade watch from a CD is successfully made. It remains only to insert an AA battery and set the time. By the way, you can also make a battery with your own hands.

How to make a source of energy from a lemon?

As we know, this fruit contains a lot of acid, respectively, with the right actions, a lemon can be turned into a real mini-battery.

Of course, the charge from such a “battery” is not enough for the operation of household appliances, however, this current is quite enough for the functioning or charging of a mobile phone.

We make homemade products for the home - preparing tools to turn a lemon into a source of constant energy

During the work, you will need tools such as a knife, a soldering iron, a drill, an iron pin, as well as several pieces of insulated copper wire. Among other items, it should be noted the need for one glass or glass, a pair of wooden sticks and the same number of pushpins. And, of course, the lemon will be our main source of energy. You can also use an orange, but there is much less acid in it, so the charge from it will be minimal.

Instruction

First, cut the lemon in half. This is necessary so that he gives more acid, which is necessary for the lemon to be fixed in the glass so that it does not roll around on the table. Further, copper and iron pins are inserted into its pulp around the entire perimeter at a distance of 0.5-1 centimeter. "Minus" we will have iron, and "plus" - copper.

Pieces of wire are attached to all pins with a soldering iron. They will act as a connector for the power supply. All elements are connected in series.

At the final stage, sticks are inserted into the battery compartment. Polarity is important here. Contacts are pressed against the contact group. The container remains open throughout the entire process of charging the device.

So, we figured out how to make useful homemade crafts for the home with our own hands. Good luck in your endeavors!

Crafts made from old items and things that can be given a second life can make your home much more comfortable. Some do-it-yourself homemade crafts for the household can significantly save the home budget, make work easier, or make the surrounding interior more interesting. And even if difficulties arise in the process, overcoming them will be worth it.

DIY for the home workshop

In almost any home there is always some set of tools necessary for the household. But sometimes situations arise when working in your own workshop or garage requires some kind of device that is either impossible to purchase in a store or is very expensive. In this case, the way out can be found by making it yourself.

Blacksmith's forge from a cylinder

This device for heating metal will become an indispensable assistant in the home workshop. The forge can be safely used to make original items using artistic forging. These will be truly unique forged items.

For the bugle, it is best to use an empty gas cylinder with a capacity of 25 liters. Its ends are cut off by a grinder, and the hearth door and its back will be made from the cut parts. The inside of the cylinder is covered with refractory ceramic wool, which is able to withstand temperatures of more than 1200 0 C. From above it is coated with fireclay (lined) that can withstand temperatures up to 1500 0 C. Fireclay slabs or refractory bricks are laid on the bottom of the hearth after lining.

A hole is drilled from above and a small drive is inserted, which allows inserting the nozzle of a gas-powered burner, which can create a temperature of more than 1000 0 C in the furnace - quite sufficient to heat the metal to a certain temperature suitable for forging.

Collapsible garage crane beam

In the manufacture of such a lift, the cash costs will be much less than buying a factory model. For its manufacture, you will have to spend money only on materials, half of which, perhaps, can be found in the garage.

Materials needed to assemble the lift:

1. Two racks - a profile pipe 100x100x2350.
2. The transverse bar is a steel pipe of arbitrary length with a diameter of 100 mm.
3. Four supports for the rod - profile pipe 100x100x600.
4. The basis and braces - a corner with regiments on 100 mm.
5. Two metal rollers for the cable.
6. Four wheels for movement.

For the lifting mechanism, it is best to use a hand winch with a worm gear with a maximum load of up to 500 kg, which is attached to one of the racks of the crane beam.

The design does not take up much space in the workshop, moves easily on hard surfaces and is quite convenient for removing the engine from the car.

Mobile tool rack

The main highlight of this rack is its small size., but at the same time it can accommodate a large number of tools, and if necessary, quickly move it to any place or adjacent room. It is very convenient to use such a rack in your workshop or when conducting construction and repair work in large rooms, especially when you need to frequently move tools.

The rack can be assembled on the basis of a collapsible plastic rack mounted on a self-made platform with wheels (trolley). The platform is made exactly to the dimensions of the rack from a metal corner with shelves 45x45 mm or a sheet of plywood with a thickness of at least 10 mm. For movement, furniture metal wheels are used.

Additionally, it is possible to make and fix fasteners for building levels, extension cords and other tools that can be stored in a hanging position to the rack.

Help for the hostess

There is not always a financial opportunity to buy, for example, something from new furniture in a furniture store or place an order for its manufacture. But you can always get out of this situation by making the right thing with your own hands, while making it attractive and unique, using improvised means for this.

Cork kitchen apron

A kitchen apron is a wall surface located between the countertop and wall cabinets. Usually this part of the wall is tiled. But many other materials can be used to cover it, for example, wine corks can be glued to the wall.

Such an exclusive decor looks quite great.

Before sticking, each cork is cut lengthwise into two halves with a sharp clerical knife. It is desirable to paint the wall black, which will emphasize the seams between the plugs.

Corks are glued to the wall using liquid nails in a checkerboard pattern or with a certain pattern, since it is unlikely that they will be laid out perfectly evenly, and curved rows will visually look disgusting.

The corks themselves are not afraid of moisture, but they quickly get dirty and are poorly washed, so it is best to close them with a tempered glass screen. True, you will have to spend a little money on it and order glass in a special workshop, where they will cut it to a given size and make holes for sockets and fasteners.

Glass is fixed to the wall with anchor dowels, which can be purchased at almost any hardware store.

Although an apron decorated with wine corks can be expensive, the result will be worth it.

The surface of the countertop, as well as the wall, can be decorated with corks and covered with tempered glass.

Hinged folding table

A folding table fixed to the wall allows you to save some space in the apartment. In the folded state, it can protrude from the wall at a distance of no more than 10 cm and does not interfere with anyone at all, but when unfolded, it can replace a full-fledged table.

There are many options where you can use a folding table fixed to the wall. Here are just a few of the most basic ones:

Shower for giving

There is probably nothing better than refreshing yourself under running water on a hot summer day, especially if he was working in the garden. Naturally, only a shower will solve this problem and relieve the fatigue that has accumulated during the day.

The shower can be installed independently without the involvement of outside help, the main thing is to choose a place for it and decide on the type of shower cabin.

Three types of cabins stand out among summer showers, which you can freely build on your own:

Installation of a simple shower is done in this way:

1. A shower cabin frame is being made, which can be assembled from metal, wooden beams or other improvised materials.
2. A metal or plastic water tank is installed on the roof of the assembled frame, which can be from 50 to 200 liters in volume.
3. It is advisable to paint a metal container black for better heating of the water. Additionally, several electric heating elements can be installed in the container, then you can take a shower even in cloudy weather.

The booth can be sheathed with boards, plywood, slate, or simply covered with a tarpaulin or cellophane film with folding canopies.

To build on your own

The topic of construction or repair, probably, worries everyone. And, of course, everyone who deals with it wants to finish it as soon as possible with minimal financial costs. Therefore, if you want to save money, you can make some materials for construction on your own. For example, it can be wall SIP panels or such a useful tool as a vibrating plate, the need for which often arises for many owners of a personal plot.

Homemade SIP panels

For their manufacture, you need to prepare a flat, hard platform. After laying a sheet of OSB 10-12 mm thick on it with a rubber spatula with teeth, apply glue to it.

Then lay sheets of foam grade 25-30 on the glue. After that, an adhesive mass is applied on top of the laid foam, as well as on the bottom OSB plate, and the second sheet of OSB is laid on top.

If several stacked boards are being made at the same time, work should be done quickly until the adhesive has set. Usually in this way you can prepare no more than 4-5 panels at a time.

After harvesting, the formed slabs need to be pressurized with a press. Since at home, of course, there is no hydraulic press, it can be replaced with a thick plywood sheet laid on prepared SIP boards over the entire plane and loaded for 2-3 hours, for example, with several bags of cement, sand or other cargo. You can even use a car by driving onto a plywood sheet along a pre-made flyover.

After the glue has completely dried, the home-made panels are ready, they can be folded into a separate pile and proceed with the preparation of new panels. The manufactured panels should lie unloaded for another day, after which they can be used for their intended purpose.

Vibrating plate manufacturing

To make a homemade vibrating plate, you will need to prepare:

1. An electric motor with an eccentric brand IV-98E, which is the main part of the vibrating plate.
2. Steel sheet, at least 8 mm thick, 450x800 mm in size. It can be ordered at any metal base.
3. Two pieces of channel no more than 400 mm long.
4. An inch tube for the handle and two rubber bushings for attaching it.
5. Of the tools you will need a welding machine, a grinder and a set of wrenches.

From the narrow sides of the plate, stepping back from the edges by 80-100 mm, make an incision with a grinder to a depth of about 5 mm. After that, bend the edges towards the notch at an angle of approximately 25 0 and weld them by welding. Bends are needed so that the vibrating plate does not sink into the material compacted by it and moves freely along its surface.

Then, across the plate at a certain distance, calculated for mounting the electric motor, two channels are welded with the shelves down. Through pre-drilled holes in the channel, with the help of M10 bolts, an electric vibrator is attached to them.

The tube handle is attached to the vibrator via soft rubber grommets, which can be purchased at an auto parts store or hardware store in the hardware department.

Thus, you can make a lot of useful things in the household with your own hands, spending on this only a part of the money that you would have to pay when buying a finished product. You just need to make some effort and have certain skills.