Painting the house with a bark beetle. What paint do the bark beetle paint with

Often, "bark beetle" plaster is used to decorate facades and internal walls of buildings. This is explained by the availability of the material, as well as its high resistance to weather conditions. An important condition for finishing the facade with "bark beetle" is painting, which will give the walls a presentable appearance. But before starting the procedure, you should familiarize yourself with the technology of its implementation and possible difficulties.

Features of the "bark beetle"

Since the price per m2 of painting work performed by professionals is quite high, many people try to paint on their own.

But, despite the ease of applying this decorative plaster, which even a beginner can handle, painting it requires certain knowledge and skills. This is due to the fact that the "bark beetle" is distinguished by a two-layer structure, since in the process of leveling the mineral particles move arbitrarily, leaving characteristic traces.

These grooves can have a wide variety of depths, shapes and directions, which makes it difficult to stain the coating. Since it is quite difficult with this randomness to achieve a uniform distribution of the shade. Therefore, in order to understand how to paint the plaster "bark beetle", you must familiarize yourself with all the intricacies of the procedure in advance.

Necessary tools for work:

rollers with different pile lengths;
several brushes;
sponge;
soft rubber;
mitten.

It is necessary to start the procedure 48 hours after the base has dried.

Types of paint

Facade decoration with "bark beetle" must withstand the negative effects of ultraviolet rays and various types of precipitation and at the same time retain its decorative qualities. Therefore, the painting should be carried out taking into account the further load on the coating.

The optimal types of paints for external work:

acrylic;
silicate;
silicone.

Each of them has a high level of moisture resistance and vapor permeability. In addition, their color scheme allows you to choose the optimal shade in combination with the roof. When dry, facade paints form a top layer that protects the coating from temperature extremes and precipitation. Initially, they are white, and then they are tinted according to the manufacturer's shade table.

Environmental friendliness and safety are the main selection criteria for painting interior walls. Therefore, durability recedes into the background.

The main types of paints for painting "bark beetle" inside the building:

water-based,
acrylic;
latex.

The last two options are best used in rooms with a high level of humidity (kitchen, bathroom), since their wear resistance index allows them to withstand this load. Subsequently, the surface of the coating can be strengthened with a finishing layer of varnish.

The better to paint the "bark beetle", everyone decides on their own, but when buying, you should pay attention to the peculiarity of the purpose. Since paint for interior works is not able to withstand external conditions, it will subsequently lose all its decorative qualities.

The main advantages of the procedure

Painting "bark beetle" plaster provides a number of advantages.

A wide range of colors allows you to bring different designs to life, experimenting with mixing different shades.
Surface treatment creates a reliable protective layer that significantly increases resistance to negative external conditions.
The textured structure of the plaster makes it possible to paint in two colors, which is impossible to achieve when finishing the building with another coating.
The paint creates a dirt-repellent barrier that keeps the façade clean and attractive all year round.

Minuses

The main disadvantage of painting "bark beetle" is the laboriousness of the process. This is due to the fact that the coating has an uneven structure and requires careful processing of all grooves.

The main difficulties when carrying out painting work:

When using a roller with a short nap, it is impossible to reach all the recesses, so some of the plaster remains unpainted. This spoils not only the aesthetic appearance, but also negatively affects the wear resistance indicator, since part of the coating will remain unprotected.
Painting with a long-nap roller is also difficult, as this will cause the tool to pick up too much spray solution. This means that the excess, not having time to dry, will flow down. This leads to the need to use additional tools to correct smudges, which will significantly complicate and delay the process.

The best solution is to use rollers and a sponge together, but before starting the procedure, you need to practice on a small section of the wall.

Do I need to prime the "bark beetle" before painting?

Before you start painting, you should first prepare the base. This procedure includes cleaning the walls from dirt and dust, with further application of a primer, which will increase the adhesion of the layers. Subsequently, painting can be carried out immediately after the treated area has dried.

The main qualities of the primer:

increases the durability of the finishing layer;
strengthens the surface, and this is especially true for porous coatings;
provides a uniform distribution of moisture, which is important when painting "bark beetle";
is an antiseptic, that is, it prevents the development of fungus on the treated surfaces.

Ignoring this step can lead to the fact that after a short period of time the wall decoration will have to be repeated.

Facade painting implies a harmonious combination of all elements of the building, which will help to emphasize individuality.

Therefore, when choosing a color scheme, it is necessary to adhere to certain rules for combining shades.

For the facade, it is better to choose pastel-colored paint, which will help it fit organically into the overall design, while it is easier to choose the shade of the roof. To avoid monotony, you can use the selected color in two different shades.
If the idea is to make the facade multicolored, then it is necessary to select shades that are harmonious with each other, which will help to streamline the diversity.
It is better to make the color of the walls lighter than the shade of the roof, although the opposite is possible. But it will only be possible to implement it with the help of a professional designer or architect.

Consumption per m2 and the cost of painting

Before you start painting, you need to calculate the required volume of finishing solution. It should be borne in mind that in this case the plaster has an embossed surface, so the average paint consumption will be within 500 g per 1 m2.

For more accurate calculations, it is necessary to carry out arithmetic operations. To do this, you need to calculate the total surface area, taking into account all openings and boundaries of each color. In the future, examine the paint can and find on it the hiding power indicator indicated by the manufacturer and multiply it by a factor of 1.4-1.7, based on the structural feature of the "bark beetle". The result obtained will mean the estimated consumption of the paint solution per 1 m2. Subsequently, it remains to calculate the required amount of paint commensurate with the treated area.

The average price per m2 of painting work on decorative plaster "bark beetle" is 120-150 rubles.

The classic way

In this case, the procedure involves the use of one color. In this case, a uniform layer is applied in one step. For this, the paint is distributed with a roller with a long nap or using a spray, while painting the grooves and grooves neatly with a brush. In the process of painting, smudges will appear, which must be immediately rubbed with a sponge or mitten.

The paint is applied with a roller up and down, but at the same time each next vertical layer should capture the previous one. When using a brush, the direction of the tool should be alternating - sometimes vertical, sometimes horizontal, which guarantees an even layer overlay.

In order to save money, you can use a tinted primer, which is directly applied to the plaster. After this layer has dried, the paint is applied with a roller, but at the same time, additional painting over the recesses is no longer necessary.

To simplify the staining procedure, you can use the plaster tinting method. To do this, add a colored pigment directly to the solution before applying it to the walls.

An important condition for uniform painting of the "bark beetle" is the creation of the same shade for the entire required solution. After the finishing layer has dried, apply another layer of paint on top with a roller, but avoiding it getting into the recesses.

It should be understood that only polymer can be tinted. Cement dry mixtures cannot be pigmented, since when adding a coloring pigment over 5%, their quality is sharply reduced, which affects wear resistance.

How to paint bark beetle plaster in two colors?

In this case, different shades can be used to achieve a more dramatic appearance of the building. But at the same time, one should observe the measure. Therefore, the best option is to use the same paint color, but different shades.

Initially, staining is carried out using a long-nap roller. This helps to treat all depressions and grooves in the plaster.

The second stage of painting work is carried out using a foam roller or sponge. In this case, using the spikes on the paint tray, it is necessary to achieve a minimum amount of solution on the tool. And then, with light movements, paint over the protruding parts of the plaster without recesses. The tinted primer method can also be used to achieve this bi-color.

Knowing these subtleties of painting, you can paint the "bark beetle" yourself. But first you need to work out the technique on the most inconspicuous place of the wall, and only after that proceed to the front side.

Coloring bark beetle in two colors

A wonderful thing, this decorative plaster bark beetle! Its convenience is that the cement base makes it possible to use it in places such as facades of buildings and private houses. She tolerates the external environment well. And if we take into account the apartment, then the balconies and loggias, even glazed, even open, are an excellent opportunity for using this type of decoration. Decorative plaster bark beetle is easy to use; application does not require special skills, as is necessary when working, for example, with Venetian decorative plaster. But there are downsides. For example, painting decorative plaster bark beetle in two colors causes difficulty for many. Let's look at the options and ways to solve this problem.

About the cons of the bark beetle

Minus number 1. Difficult to paint.

This actually presents a certain difficulty, since the texture is such that the finished surface has numerous depressions, similar to depressions in a tree eaten by a bark beetle. To paint over them is the biggest difficulty.

You need to take a thicker roller and soak it well with paint. The paint will flow into the hollows, then flow out from there, and accumulate ugly on the plane. We'll have to collect it with a roller. And after all, in these recesses there will still be unpainted, which will have to be tinted with a brush. In general, to suffer, and think about what it would be better not to paint.

Minus number 2.

After painting in one color, you will really understand that it was better not to paint, since the bark beetle painted in one tone looks good only if it is made perfectly. And if you only once or twice tried to make decorative plaster bark beetle with your own hands, then you are still far from ideal.

But there is a way out to fix everything. Paint the surface a second time with a different color. But with the condition that only the plane is painted, and the stripes, grooves and potholes remain in their original color. This already looks quite original. Therefore, if it really happened, then go ahead. Paint in a different tone over the already painted one.

How to paint a bark beetle in two colors

But there is an opportunity to avoid the pain of painting the inner part of the texture. The method is quite simple. It consists in adding color to the plaster while mixing it. Then, when making a decorative layer, it will already have an initial specific color.

Perhaps you have an idea of how to ensure that the batch does not differ in color from the batch? This is actually quite difficult. But in fact it is not needed. An approximate tone for each batch will be sufficient. At first, you will have a difference in the palette of different mixes.

The project "Wet facade - installation secrets" - stage 20 application of decorative plaster "bark beetle"

Disadvantages of the bark beetle

Difficult handling. This is a very significant difficulty. The bark beetle has a certain texture, which has many depressions that look like pits and trenches left by bark beetles in the wood. You will have to suffer a lot to process them. Of course, you can sit out for hours trying to do the processing. But it will take a lot of effort, time and emotion.
Not very pretty after processing. After the processing is done, the appearance will not inspire confidence. Only if the bark beetle was originally made perfectly, then it will look beautiful.
If you tried to make Bark beetle plaster with your own hands, you can hardly achieve the perfect result.

You shouldn't think that everything is so bad. There is still a way out. You can paint the surface more than once. It is done so that all depressions and cracks are obtained in one color, and the rest of the surface in another. From the outside, such a creation looks very interesting.

Bark beetle painting in two colors

For a modern person, there is a great way not to expose yourself to torture when processing the inner parts of the texture. In the photo you can see how the interior, decorated in this way, looks original.

To do this, add color to the dissolved plaster while mixing. As a result, during the production of the decoration layer, there will be a given color.

Advantages of painting

As mentioned above, all procedures can be done by hand. This does not require any special skills.

So what are the advantages of painting with decorative plaster?

Choice of paint

The choice of any buyer is offered decorative plaster, which can be used for processing, colored or white. If we talk directly about white plaster, then it implies the use of further processing. Colored is bought ready-made to be applied to the surface.

In order to competently approach the process of choosing a color, you can consult with designers, or look at photos on the Internet, which show various options for decorating elements of apartments and houses. The main thing is that you yourself like the approach, because it is you who will most often come into contact with the future creation.

Technology

So, you figured out the colors and tones, it remains to paint the plaster with your own hands.

First, you need to prepare the walls for further application of decorative plaster on them. What does this mean? First, cleaning the walls, preparing the mixture, leveling the base, and so on.

Secondly, painting can be done in two ways. You need to stop at one of them. In the first case, the paint will be applied to the already finished base. In the second case, you will have to add color to the mixture.

If we talk directly about coating with paint, then interior and facade paints can be used. You can paint in two colors, change the color scheme, apply different color shading techniques, and so on.

Naturally, you cannot do without a certain set of tools. This includes:

a brush and roller to apply paint;
nylon cord, designed to move a bucket of paint;
plate with spikes.

Before starting work, it is imperative to provide a coating on the floor, walls, utensils and other interior items in order to avoid the ingress of paint on them.

Currently, it is believed that the easiest and fastest way to paint is one pass. But most often only one color is used.

How to paint decorative plaster in two colors with your own hands: photo, video

Painting decorative plaster in two colors is an effective and interesting type of finish that is easy to master with your own hands.

Painting decorative plaster in two colors - basic rules

Many have already appreciated the advantages of using decorative plaster, which can perfectly decorate not only the facade, but also the interior walls of rooms. There is a large selection of this material, and painting the decorative plaster in two colors creates a unique and original interior design.

Features of painting

Before starting work, you should familiarize yourself with the properties and characteristics of the material, as well as the rules of the technological process for a high-quality and durable finish.

Compliance with the rules for choosing the material and correctly performed work will provide not only a beautiful appearance of the walls, but also save money on rework.

Double painting with a bark beetle has a number of features, the observance of which, in the end, will allow you to achieve a high-quality result. To perform such work, a lot of experience is not required; you just need to familiarize yourself with the technology in detail.

The main disadvantages of the bark beetle

The use of this finishing option for interior decoration has some difficulties, which include:

Quite a laborious surface treatment process;
An attractive appearance is achieved only with the correct work, which is quite difficult to achieve;
In most cases, it is recommended to contact professional craftsmen in order to get a quality finish.

However, despite all the difficulties in performing plastering in this way, there are also positive aspects. So, for example, the walls can be painted many times, while the recesses and depressions are painted in one tone, and the rest of the surface in another, which looks quite original.

Main advantages of double plastering

Painting with decorative plaster in two colors actually has many advantages.

Among which are the following:

This method of wall decoration allows you to create an original and unique design, and with a skillful choice of colors, you can create various design solutions;
Protection from moisture and direct sunlight;
When choosing light colors, the walls will not overheat in summer.

Paint selection rules

In order to choose the right decorative plaster, the bark beetle is still recommended to consult with a specialist, because the further decoration of the walls depends on the quality of the material.

There are two types of such paint: white and colored. The use of white paint requires additional processing, for example, painting in a specific color.

Colored plaster is offered in a wide range of color palettes and is realized ready-made, which just needs to be applied to the surface.

Paint application technology

After choosing the tone of the plaster, they begin to prepare the walls, namely, they thoroughly clean them of all kinds of dirt, old coatings and dust. If necessary, the surfaces should be leveled and the existing defects and flaws should be eliminated.

Direct wall painting can be done in several ways. For example, you can apply plaster to the prepared surface or add a different shade to the premix. You can also combine colors on the walls, thus creating a beautiful style in the interior, emphasizing individuality.

To plaster a room, you will need a certain set of devices, which includes a special container with plates and spikes, brushes and rollers.

Before plastering, the furniture and the floor should be covered with a protective film to prevent plaster from getting on them.

Wall painting options

There is more than one way to paint walls with decorative plaster.

Which include:

Staining in one layer. The simplest option for wall decoration, which does not require professional skills and one type of material is used;
Dry brush option. This method involves the application of a starter layer of a dark color, on which, after it dries, a lighter shade is applied. This allows you to create a relief and volumetric design, and to complete the work you will need a brush with short bristles;
Blur. This method of staining allows you to visually highlight the depressions on the surfaces, for which darker tones are used. This finishing option is considered the most laborious in comparison with other methods and requires significant material costs, as well as more time for plastering.

When painting with decorative plaster in two colors, varnish can be used as a finishing protective layer. It is applied after the bark beetle has completely dried, and it is recommended to purchase a water-based varnish for work.

In order for it to better penetrate deep into the plaster, it is diluted in half with water. The varnish is applied in several passes, after the previous layer has dried. Such a varnish coating not only additionally protects the walls, but also gives them shine, attractiveness and originality of the finish.

It is necessary to apply varnish to the entire wall, while avoiding smudges, so that in the end there are no ugly marks on the coating. And for its application, a wide brush is better suited, which is well wrung out before applying varnish to the wall.

Painting decorative plaster: choice of materials, tools for work, technology of work

Applying a decorative coating and painting the surface is by no means a cheap pleasure, given that the price for the services of professional craftsmen in this area is quite high. Therefore, it is advisable to carry out all the finishing work yourself. Do-it-yourself painting of decorative plaster is not the easiest task, requiring a thorough study of the theoretical component.

The photo shows the decorative coating

The decorative finishing coating is exclusive to the decoration of the walls. It is the walls, both in residential and in any other premises, that are decorated with decorative coatings that can radically transform the interior space of the room.

Decorative plaster or paintable wallpaper in most cases requires a subsequent coat of paint.

Let's try to figure out how to paint decorative plaster with our own hands and what materials and tools to choose for this.

Choosing materials, calculating costs

In most cases, the ready-made plaster mixture has already been diluted in the factory, in different color shades and you will not have to paint it. It is enough just to choose a suitable color scheme in the store and apply the material to the prepared base.

Decorative plaster for painting, as a rule, is sold dry and, when diluted and further applied to a previously prepared wall surface, has a white or slightly grayish tint. It is this type of material that is intended for further painting.

Finishing options, not all, as you can imagine!

Decorative plaster paints are formulated with acrylic, silicate or silicone and water-based ingredients.

To determine the required amount of paint for finishing, it is necessary to calculate the total area of the treated surface. To do this, you need to multiply the perimeter of the walls by the height, then from the obtained result of the calculations, you need to subtract the pre-calculated area of the window and door openings.

NOTE: It should be borne in mind that painting of relief plaster will take a larger amount of material, besides, finishing will be done in two times, which means that the resulting wall area can be safely multiplied by two plus 10–20% of the material for the stock.

By making the necessary wall area calculations correctly, you can calculate the total cost of materials.

IMPORTANT: You should definitely not choose for finishing work, for example, fire-retardant paints for metal Polistil or the equally well-known electrically conductive paint Zinga. These types of paints and varnishes are more suitable for protecting metal elements.

Tools for the job

The set of tools is minimal and includes:

Plastic tray (cuvette);
Drill with a small mixer to stir the material;
Brushes with a wide working base or roller;
Polyethylene film to protect the floor from splashes;
Rubber gloves, glasses and a special robe.

Small drill with plastic attachment

Work technology

All work on applying a paint and varnish layer to a decorative coating should be performed only after the base is completely dry. The approximate time for complete drying of the plaster is from 48 hours, depending on the thickness of the layer, the type of material and the air temperature in the room.

The preparation instruction is such that if the base is not strong enough, it is advisable to strengthen it with special colorless types of primers. After priming, the base is dried again and only after that the walls are painted over.

The paint in the jar is thoroughly stirred and poured in small portions into a plastic tray. The surface of the floor closer to the wall to be treated is covered with plastic wrap.

The composition should be of a uniform color, therefore, mix the paint thoroughly.

Paint is applied with a brush, both vertically and horizontally: this is the most convenient and fastest way. Or with a roller from bottom to top in a vertical position.

In this case, carefully squeeze out excess material from a brush or roller in a tray to avoid splashing on the floor. Thus, you will prevent excessive waste of material and will not stain the floor covering.

When applying paint with horizontal strokes in parallel, shade in a vertical position, so you completely paint over the selected section of the wall and leave no untreated glimmers.

When carrying out work, do not forget to shake the composition of the material with the same brush to avoid the formation of a frozen film on the surface.

You can perform actions with a brush - as it is convenient for anyone!

Rolling paint is no different from brushing.

To do this, the roller must be dipped into the cuvette with the material by about half, keeping the tool in a horizontal position and rolled over the ribbed surface of the tray to remove excess material.

It is best to apply the composition to the wall from the bottom up, while the subsequent stripes should be slightly overlapped by about 5 cm, in order to avoid unpainted areas.
As necessary, the pressure on the roller is increased to obtain a uniform coating that does not stand out against the general background.
In some cases, the masters apply the composition to the wall first with wide brushes with maximum shading, and then roll it with a spongy or furry roller. Thus, the highest quality paint application is achieved on walls covered with decorative plaster.

We paint the plaster in two layers

How to paint decorative plaster in two colors? To do this, at the stage of mixing the plaster solution, it is better to add the color of the desired color tone to it. Or, in the case of buying a ready-made solution, choose the desired color.

This will give you the first base color, and then experiment with treating individual areas of the coating with different shades of color to achieve the optimum surface appearance.

Two-color finish

For example, you can shade depressions and cracks and other specific areas of wall cladding with a different color for a stunning visual impact.

After studying our material and video in this article, you can repeat the whole process of applying paint to a decorative coating with your own hands. Having completed the work yourself, you will gain invaluable experience and at any time you can repeat this procedure for decorating the walls in your apartment or private house.

Painting decorative plaster: how to paint in two colors and in other ways, video and photo

How to color decorative plaster

In recent years, decorative plaster has taken one of the leading positions among finishing materials. At the same time, more and more often you want to save on repairs, and the best way to save money is to do everything yourself. We will tell you how to paint decorative plaster without the involvement of specialists. After reading this article, you can do everything efficiently and creatively so that the result of your actions is aesthetically pleasing.

Painted decorative plaster will look very stylish

Main advantages

The popularity of using decorative plaster in finishing is growing due to such advantages as:

a wide range of colors that allows you to realize any design fantasy;
plasticity and ease of application - when working with this material, no discomfort is created, and due to the plasticity, it will be easy for you to apply the finish;
environmental friendliness - in our time it is extremely important. We pay attention to what surrounds us, especially when it comes to the children's room;
Durability - Long service life will save you costs in the future.

Types of paints

The paint should be chosen depending on where it will be applied (inside or outside the house). Both facade and interior paints can be produced on the basis of organic solvents, including:

There are also water-based formulations. After choosing a paint, calculate how many cans you need to buy. To do this, you need to measure the surface area that you are going to paint.

Paint cans always show approximate consumption. It is best to take the maximum value, multiply it by 2 (as a rule, it is necessary to paint in two layers) and add another 15–20 percent to the resulting volume. Decorative plaster has a relief, and the higher it is, the greater the consumption.

The decorative plaster itself is white and colored. A tinting element has already been added to the colored plaster, and the white one needs to be painted in the future. You can also add color to the mixture that you will be applying to the walls. Be prepared for the color of the dried plaster to be different due to the fact that after drying, the finishing material becomes slightly lighter.

Painting methods

If you choose paintable decorative plaster for your interior, you should know how to do it right.

First of all, you need to wait until the plaster is completely dry. Depending on the humidity of the air, the composition of the mixture and the temperature in the room, the wait can take up to three days. It is recommended to treat the finishing material with a colorless primer in order to prevent peeling and shedding. After the primer is dry, you can safely start painting.

Depending on the desired effect, either a roller or a brush must be used.

To paint the surface perfectly evenly, you must first use a brush and then a roller. The simplest method is one-pass painting. You will need a long-haired roller (you can also use a regular brush) to paint the surface (including all grooves and ridges). The result will be a base shade.

If a darker paint is subsequently applied to the protruding areas of the relief, the wall will visually acquire additional volume. This application technique is called the dry brush method. You can add a twist (of course, if it fits into the interior design) and instead of dark paint, use metallics (gold, silver, bronze). They are applied with a dry brush or a special mitten.

In order to reduce the color contrast on a surface with a fine texture, you need to rub the paint with a rubber sponge. If you don't have one, you can use a mitten.

Using this technique, you can enhance the effect of deep relief - the coating will take on the look of antiquity (again, this should only be done if such a wall fits into the overall concept of your interior). In this case, the use of metallics will be more relevant than ever.

You are probably familiar with the "bark beetle" effect. To achieve this you need to use a short nap roller. In this case, grooves will remain in which the paint did not fall, which will create the pattern. You can experiment carefully and enhance or diminish this effect by adding a pigment to the composition and re-painting the walls.

It is advisable to choose a high-quality paint

If you like the blur effect and want to embody it on your walls, you should focus on the high time and physical costs. The "wash" method consists in applying a dark paint to the main background of the surface. You need to wait for this layer to dry out (important: not completely dry). Then it is washed with a damp cloth from all convex places. The depressions will be significantly darker, creating a three-dimensional pattern.

For this method, high quality paint is used that is resistant to wall washing (for the base). At the same time, a cheaper non-moisture resistant aggregate can be used, since it is easier to wash off.

The final stage of painting decorative plaster can be the application of a protective layer of varnish. It is applied as a fixer to the wall surface after complete drying. For such purposes, a water-based varnish is suitable.

In order for the varnish to penetrate into all cavities, it must be diluted with water in a 1: 1 ratio. Apply the varnish in two to three approaches (take a break so that the varnish can dry) with a wrung-out brush, avoiding drips. The surface will shine effectively due to the varnish layer, and, importantly, it will be easier to care for such walls.

We hope you are convinced of the attractiveness of decorative plaster finishing. Now you know how to paint it, and you understand that there is nothing difficult about it. Decide on the effect you want to get, prepare the necessary tools for work, buy paint and get down to business. Let your walls take on individuality, absorbing your imagination and hard work.

How to paint decorative plaster

Why is decorative plaster so often chosen as a finishing material? What methods of painting decorative plaster are there?

Painting decorative plaster in two colors

How to paint a bark beetle in two different colors

The advantages of decorative facade plaster Bark beetle have already been appreciated by many owners of private houses. With the help of such finishes, you can give your home an attractive appearance and protect its walls from any external negative influences. Among the important advantages of such decorative cladding, the ability to paint the plaster in two colors is often distinguished.

It is quite possible to paint the facade with two colors on your own, however, for such work, some knowledge and skills are required that can be gleaned from the Internet.

Facing with Bark beetle

Painting of facade plaster in two colors is the final stage of finishing work, before the start of which the owner needs to solve other important tasks.

In order to better understand what Bark beetle plaster is, the owner should understand all the features of such a cladding, take into account all the pros and cons.

Disadvantages of plaster

First of all, you need to figure out what difficulties the home owner will have to face in the work, who decides to finish the facade with the Bark beetle on his own. Z

Newbie people - specialists in the field of construction and decoration of residential buildings, usually distinguish two disadvantages of such a decoration:

Despite the described shortcomings, with the help of the Bark beetle, you can really give the house an attractive appearance, originality, even uniqueness. Painting in two colors is an excellent solution for all owners who carry out installation work on their own. The easiest way is to paint obvious façade irregularities in one color, and the rest of the area in another. In this case, you can get a very original design.

When finishing the facade with the Bark beetle, color can be added to the plaster, in this case, immediately after applying to the wall, the cladding will already have one desired color, and therefore the owner will only have to paint the irregularities with another enamel.

Benefits of staining

Despite the difficulties in working with the Bark beetle, this option for facing the external walls of the building is deservedly popular with the owners of a variety of buildings. This is, of course, due to the large number of advantages provided by the plaster and paint itself.

Among the main advantages of colored bark beetle are:

How to choose paint

When buying decorative facade plaster, the owner can immediately choose a finishing material in white or another color. In the first case, the plaster will definitely need staining, in the second - at the request of the owner of the house.

As for the choice of color, here the owner will have to decide on his own, the owner can order the services of professional designers who will select the most suitable tones that will be applied to the plaster.

Dyeing technology

When the facade paints are selected, it is necessary to understand what it means to paint in two colors, how the paint is applied. First of all, before installing decorative plaster, you should competently prepare the surface of the facade, that is, clean the walls, prepare the solution and repair all defects.

In addition, before installing the Bark beetle, you should choose whether to add color to the plaster before installation, or the plaster will be painted after the coating is installed on the facade.

The option of painting a surface already tiled with plaster gives the owner the broadest possibilities. For such processing, you can use a variety of paints, you can paint in two colors, you can use different technologies and methods by which paint is applied to the surface, etc.

In any case, before painting, you need to purchase not only the selected paint, but also the tools necessary for such finishing work. To paint installed plaster, you will need a brush, roller, paint stirrer and a spiked plate.

The easiest way to paint the Bark beetle is to paint in one pass, but in this case only one type of paint is applied. To achieve any original appearance for your home using this method will not work.

Painting decorative plaster is the final stage of finishing. Decorative plaster can be white or gray, with the exception of the one that is purchased ready-made with the addition of a colored pigment to the plaster mixture. White or gray plaster is suitable for painting.

Painting decorative plaster

For painting decorative plaster, both facade and interior paints are used. They can be in organic solvents, which are silicate, acrylic and silicone compounds, or water-based.

In the event that the plaster is to be painted, then before starting work, first of all, it is necessary to determine the area of the working surface. For this purpose, the perimeter of the walls should be measured and then multiplied by the height. It is also necessary to measure the window and door openings in order to then subtract their area. Now, having selected the paint, you can calculate its approximate consumption.

The surface covered with decorative plaster usually has a well-defined relief. The higher the surface relief and the smaller the elements, the higher the paint consumption will be.

It is better to take the maximum value indicated on the paint can for the calculation. Multiplying this number by the footage of the room, double the resulting value, since the painting is done in two stages. Then, add another 15-20% to the resulting displacement.

Plastering and painting of walls, choosing tools:

The following tools are required for painting:

Roller with brush tray
Nylon cord (on a bucket of paint to prevent splashing)
A small spiked plate along the edge of the tray.

For painting plastered surfaces, you can use a wide brush, roller or special mitten.

Painting of decorative plaster # 8211 technology and methods

How to paint decorative plaster?

You can start any painting work on the plaster only after the layer of plaster for painting is completely dry. This may require waiting 8 to 48 hours. Drying times depend on the composition of the plaster mixture, the level of humidity and the ambient temperature.

If there is a tendency for the plaster to peel off or shedding, it is advisable to treat the plastered wall for painting with a colorless primer to strengthen the surface.

When the primer is dry, you can start painting over decorative plaster.

Before starting work, furniture, floors, windows and other surfaces must be protected from splashes and drops of paint. For this, it is recommended to use a special plastic wrap, which can be purchased at any hardware or hardware store. When painting the facades, such precautions are not required, but the windows and the path near the wall should still be covered. Stir the selected paint well before use. The paint is applied to the walls with a roller or brush. When painting walls with a brush, paint is applied with both horizontal and vertical strokes.

Apply the paint first with horizontal strokes, then blend them with vertical strokes. To obtain an even color, it is recommended to shake it up periodically with the same brush that is applied to the paint, so that the paint composition remains uniform in color and density during work, and no sediment will form at the bottom. The roller painting technique is also simple. First, immerse the roller in the paint and roll it over the spiked plate along the edge of the tray to remove excess paint.

The paint is applied to the wall from top to bottom, and then from bottom to top. The stripes of paint should be applied in such a way that they lay on top of one another, about 4–5 cm. As the paint is used up, the pressure on the roller increases so that the paint is laid down in an even layer. You can paint the wall in one or two steps. In both cases, the paint should be thoroughly shaded.

Painting plaster with a roller

You can get a perfectly even painted surface if you first use a brush during application, blend well, and then roll the surface with a roller. The simplest way to paint decorative plaster is to paint in one pass, i.e. complete painting of the plastered surface, including all the indentations and projections in the same tone. You can also try using a combination of several different colors. For this, a light base coat of paint is first applied to the surface using a roller. After it is completely dry, the protruding areas of the relief are covered with paint of a darker shade. This technique of giving additional volume to the plastered surface is called the dry brush method.

Sometimes, instead of dark paint, metallics are used (bronze, gold, silver). They are applied with a dry brush or a special mitten.

To soften color contrasts on a surface that has a finer texture, you can additionally rub the paint with a mitten or a rubber sponge. The same technique is used to enhance the effect of deep relief or, if you want to give the decorative coating an antique look. It is permissible to emphasize protruding relief details by applying bronze, gold or silver paint.

Using a short-haired roller, you can achieve an interesting effect when painting the surface of the plaster for painting like a bark beetle. Remaining unpainted, the grooves form a contrasting bark beetle pattern on the wall. This difference can be increased, or, conversely, muffled by first adding a coloring pigment to the plaster, and then paint the walls in the same color, but with a different shade.

How to paint non-uniform decorative plaster?

Painting textured plaster suggests some peculiarities. If textured and smooth areas are combined on the plastered wall surface, paint should be started with textured ones. Smooth elements can be painted only after the embossed ones are completely dry. If this moment is not taken into account, then when paint is applied to the entire surface of the wall, without taking into account its texture, weakly fixed particles of the plaster surface can peel off, while sticking to smooth areas. After drying, when reapplying a layer of paint, it is no longer necessary to strictly follow this sequence.

Dried and painted decorative plaster can be additionally coated with beeswax to give the surface a matte sheen.

Coloring bark beetle in two colors

About the cons of the bark beetle

Minus number 1. Difficult to paint.

How to paint a bark beetle in two colors

By the way, in the first photo, the lower part has not yet dried out, therefore it has spots.

But after you paint the entire plane in the second tone, this difference in the grooves is completely invisible. Judge for yourself.

Decorative plaster bark beetle with the addition of a coller and a solution painted in a second tone.

The whole difficulty of painting decorative plaster will be in this case so that the paint, on the contrary, does not flow into the furrows of the bark beetle. To do this, take a roller with a short nap, for example velor, and lightly pressing, walk it along the plane of the texture. The result will look great.

Another way to paint decorative plaster

What to do if you have already applied the bark beetle decorative plaster, but did not add color to the solution? Is it possible to paint, avoiding the pain of painting the inside of the texture? There is a second way, invented by enterprising painters. Take a primer, latex or acrylic, and add color directly to it. And then we saturate the entire finished surface with this tinted soil. The primer is liquid and flows easily enough into all pores. And when dry it forms an indelible layer. At first, you may be horrified, because you know what happens.

Type of decorative plaster after applying a primer with a color added to it

But after painting the plane in the second tone, you will not be disappointed. After all, the result will be such that you cannot tell what you painted there for the first time, paint or impregnated with tinted primer.

Most likely, these little subtleties will help you to make your decorative bark beetle plaster look impressive.

And one more piece of advice. Many who start these types of work for the first time choose the most noticeable and largest wall at once. Make no mistake. Start with the most inconspicuous. And when it comes to that big one, you will already have some experience.

Painting decorative plaster in two colors

How to paint the bark beetle in two different colors Contents of the article: In this article: The advantages of decorative facade plaster The bark beetle has already been appreciated by many owners of private houses. With the help of such ...

A characteristic feature of this plaster is its textured surface, which depends on the type of grind. has its own difficulties - due to the roughness of the base with typical grooves. It is important to treat the wall in such a way that the three-dimensional effect is preserved - without filling the texture pattern.

Why do I need to paint the bark beetle

Before painting the bark beetle, one must be aware of the complexity of working with a specific porous texture, mottled with "wormholes". A dense layer consisting of environmentally friendly components is periodically renewed by painting. This will help:

update the interior, giving it a novelty;
additionally protect the surface from excess moisture, temperature changes, and other destructive factors;
coloring in different colors is one of the simplest methods of functional zoning;
the transformation of the walls with the use of double and triple staining will give depth and volume to the characteristic texture.

A lot of videos have been written and filmed on how to paint a bark beetle, but no special composition for this type of decor has been proposed.

Advantages and disadvantages of painting

The most important advantage of any repainting is the excellent aesthetics of the coating. After the renovation, you can forget about the repair for a long time, the paint will protect the surface from drying out and cracking of the porous plaster.
When they talk about shortcomings, they mention a time-consuming, laborious, protracted processing process:

it is difficult to find a tool for full-fledged filling of grooves;
it is necessary to have the skill to collect the solution on the roller so that it is enough for a full renovation, but it did not fill the grooves in the plaster bark beetle when painting;
often you have to work with different tools, special roller nozzles for even distribution of the composition, removing excess with a sponge.

Those who have the patience to complete the painting process on their own will be lucky to see the excellent fruits of their labor.

What paint to choose

Construction companies use modern, water-based facade paints and emulsions, proven in practice. Thanks to special equipment, they can quickly process large areas with decorative plaster.
For domestic painting indoors, alkyd or acrylic enamel is recommended. It is permissible to use classic oil suspensions, as well as water-based compositions of the latest generation.

Note! Paints and varnishes with the "bark beetle" effect are produced - the painting will combine the characteristic texture of materials of various properties.

Oil

People of the older generation are well aware of suspensions that were diluted with linseed oil and painted everything from windows to doors. Until recently, this paint did not have a worthy alternative.
Characteristics:

thick oily base with a typical solvent odor;
the coating forms a vapor-impermeable film;
the surface transforms upon contact with caustic solvents, alkalis and acids;
ignites when heated;
fades quickly under direct exposure to ultraviolet rays.

Although painting of plaster "bark beetle" is done very rarely, with large household supplies, it can be used for these purposes. Modern enamels have practically ousted this variety from the market.

Alkyd

Alkyd enamels are also suitable for painting bark beetle plaster, including outdoor work. The binder firmly protects the walls of the house from atmospheric factors and temperature extremes.
Affordable cost is the most important advantage of this suspension among analogues.

Note! The building materials market is overflowing with low-quality counterfeits - there is a risk of acquiring a fake for decent money. It is not worth purchasing a suitable paint without certificates.

The main disadvantage when used indoors is the characteristic smell of a solvent, which will be felt for some time after the repair.

Acrylic

Aqueous dispersions based on acrylates are universal dyes for bark beetle plaster. They are widely used for indoor use, since they are environmentally friendly compounds. Main advantages:

a durable coating without a persistent chemical odor (the water base is safe for people suffering from allergies and asthma);
a huge selection of color variations is a great opportunity to experiment;
the ability to visually combine adjacent surfaces of different types with a common paint;
excellent vapor permeability - the walls "breathe", absorbing excess vapors, releasing it into the atmosphere when dry, without cracking.

Important! The color or its intensity can be enhanced with the next painting of the bark beetle plaster. The paint and varnish composition should be compatible with the base, the color should be one tone darker than the previous coating.

Painting technology

There are several ways to transform a decorative wall in the interior:

repaint the bark beetle plaster according to the principle of contrasting blocks;
slightly update the texture in the same range;
paint with stripes or contrasting areas, outlining several functional areas in a studio apartment or combined living room;
paint the bark beetle plaster in two or three colors to enhance the feeling of depth and volume;
add luxury, thanks to additional processing (patina or gold leaf effect).

Note! The solution is prepared immediately before the walls are treated so that it does not lose its properties.

Preparatory work and tools

The best tool is a specialized spray gun for spraying water-dispersed paints over plaster. If possible, it is better to rent it for the duration of the renovation. With a large amount of work, it is better to purchase an apparatus for water-dispersed tinting. When there is no experience - entrust the team of specialists.
A good result will be provided by a suitable tool:

roller with nozzles (short and medium pile under fur);
brushes (small, medium) for penetration into hard-to-reach areas;
a sponge or a special mitten to remove excess mixture.

In addition, you will need goggles, work gloves, and overalls. They work in a ventilated room without a draft.
The fastest result with coloring the bark beetle is provided by a long-nap roller. It is more convenient for them to work on wide walls. Hard-to-reach areas behind the battery, around pipes, sockets, switches, are more difficult to open without errors with water-based whitewashing.
It is important to ensure that excess mixture does not accumulate in furrows that take a long time to dry. Too liquid composition can lead to cracking, swelling of the base.
When preparing a room for renovation, it is important to take out all the furniture, personal belongings, cover the lamps and other design elements with plastic wrap. It is recommended to apply a vacuum cleaner to the plaster to remove fine crumbs, suspension, dust.

Paint application

Before painting the bark beetle in two colors, it is recommended to make a test in a hidden area of the room. This will help ensure that both colors are in harmony with each other. The effect of depth can be achieved by choosing a darker shade for the grooves, a lighter shade for the base.
The best preparation is to treat with a suitable primer, preferably the same brand as the base color.

Important! The pigment can be added to the primer. It is applied with a spray gun, carefully working through all the decorative grooves.

It must dry (the time is indicated on the package). For the topcoat, if it is a residential area, it is better to take imported acrylic or water-based paint. Processing begins from the top in order to have time to remove drips. It is preferable to work with a roller, capturing wide areas, in difficult places - with a brush.

Conclusion

The easiest way to renovate an interior is to paint the plastered walls with a suitable composition. Choosing the right spray paint will make your job easier. The best choice of paint is an acrylic or water-based base. Painting in two colors with spraying will significantly improve the appearance of the room.

How to paint a bark beetle in two different colors

In this article:

It is quite possible to paint the facade with two colors on your own, however, for such work, some knowledge and skills are required that can be gleaned from the Internet.

Facing with Bark beetle

Painting of facade plaster in two colors is the final stage of finishing work, before the start of which the owner needs to solve other important tasks.

In order to better understand what Bark beetle plaster is, the owner should understand all the features of such a cladding, take into account all the pros and cons.

Disadvantages of plaster

First of all, you need to figure out what difficulties the home owner will have to face in the work, who decides to finish the facade with the Bark beetle on his own. Z

Newbie people - specialists in the field of construction and decoration of residential buildings, usually distinguish two disadvantages of such a decoration:

Benefits of staining

Among the main advantages of colored bark beetle are:

How to choose paint

Dyeing technology

In addition, before installing the Bark beetle, you should choose whether to add color to the plaster before installation, or the plaster will be painted after the coating is installed on the facade.

The easiest way to paint the Bark beetle is to paint in one pass, but in this case only one type of paint is applied. To achieve any original appearance for your home using this method will not work.

Want more information on the topic? Check out these articles:

Painting decorative plaster

What paints to choose and how to calculate the consumption correctly

For painting decorative plaster, both facade and interior paints are used. They can be in organic solvents, which are silicate, acrylic and silicone compounds, or water-based.

The surface covered with decorative plaster usually has a well-defined relief. The higher the surface relief and the smaller the elements, the higher the paint consumption will be.

Plastering and painting of walls, choosing tools:

The following tools are required for painting:

Roller with brush tray
Nylon cord (on a bucket of paint to prevent splashing)
A small spiked plate along the edge of the tray.

For painting plastered surfaces, you can use a wide brush, roller or special mitten.

Painting of decorative plaster # 8211 technology and methods

How to paint decorative plaster?

If there is a tendency for the plaster to peel off or shedding, it is advisable to treat the plastered wall for painting with a colorless primer to strengthen the surface.

When the primer is dry, you can start painting over decorative plaster.

Painting plaster with a roller

You can get a perfectly even painted surface if you first use a brush when applying, shade well, and then # 8220 roll the surface with a roller. The easiest way to paint decorative plaster is to paint # 8220 in one pass # 8221, that is, complete painting of the plastered surface, including all the indentations and protrusions in the same tone. You can also try using a combination of several different colors. For this, a light # 8211 base coat is first applied to the surface using a roller. After it is completely dry, the protruding areas of the relief are covered with paint of a darker shade. This technique of giving extra volume to the plastered surface is called # 8220 dry brush method # 8221.

Sometimes, instead of dark paint, metallics are used (bronze, gold, silver). They are applied with a dry brush or a special mitten.

To soften color contrasts on a surface that has a finer texture, you can additionally rub the paint with a mitten or a rubber sponge. The same technique is used to enhance the effect of deep relief or, if you want to give the decorative coating the look of # 8220 antique # 8221. It is permissible to emphasize protruding relief details by applying bronze, gold or silver paint.

Using a short-nap roller, you can achieve an interesting effect when painting the surface of plaster for painting type # 8220 bark beetle # 8221. Remaining unpainted, the grooves form a contrasting # 8220 bark beetle # 8221 pattern on the wall. This difference can be increased, or, conversely, muffled by first adding a coloring pigment to the plaster, and then paint the walls in the same color, but with a different shade.

How to paint non-uniform decorative plaster?

Painting textured plaster suggests some peculiarities. If textured and smooth # 8211 areas are combined on the plastered wall surface, paint should be started with textured ones. Smooth elements can be painted only after the embossed ones are completely dry. If this moment is not taken into account, then when paint is applied to the entire surface of the wall, without taking into account its texture, weakly fixed particles of the plaster surface can peel off, while sticking to smooth areas. After drying, when reapplying a layer of paint, it is no longer necessary to strictly follow this sequence.

Dried and painted decorative plaster can be additionally coated with beeswax to give the surface a matte sheen.

Painting decorative plaster video material:

Coloring bark beetle in two colors

About the cons of the bark beetle

Minus number 1. Difficult to paint.

Minus number 2.

How to paint a bark beetle in two colors

By the way, in the first photo, the lower part has not yet dried out, therefore it has spots.

But after you paint the entire plane in the second tone, this difference in the grooves is completely invisible. Judge for yourself.

Decorative plaster bark beetle with the addition of a coller and a solution painted in a second tone.

Another way to paint decorative plaster

Type of decorative plaster after applying a primer with a color added to it

Most likely, these little subtleties will help you to make your decorative bark beetle plaster look impressive.

Painting the house with a bark beetle. What paint do the bark beetle paint with

Features of the "bark beetle"

Types of paint

The main advantages of the procedure

Minuses

Do I need to prime the "bark beetle" before painting?

Consumption per m2 and the cost of painting

The classic way

How to paint bark beetle plaster in two colors?

Coloring bark beetle in two colors

The project "Wet facade - installation secrets" - stage 20 application of decorative plaster "bark beetle"

Related Tagged Posts

Disadvantages of the bark beetle

Bark beetle painting in two colors

Advantages of painting

Choice of paint

Painting decorative plaster in two colors - basic rules

Features of painting

The main disadvantages of the bark beetle

Main advantages of double plastering

Paint selection rules

Paint application technology

Wall painting options

Painting decorative plaster: choice of materials, tools for work, technology of work

Choosing materials, calculating costs

Tools for the job

How to color decorative plaster

Main advantages

Types of paints

Painting methods

Painting decorative plaster in two colors

How to paint a bark beetle in two different colors

Coloring bark beetle in two colors

Why do I need to paint the bark beetle

Advantages and disadvantages of painting

What paint to choose

Oil

Alkyd

Acrylic

Painting technology

Preparatory work and tools

Paint application

Conclusion

How to paint a bark beetle in two different colors

Facing with Bark beetle

Disadvantages of plaster

Benefits of staining

How to choose paint

Dyeing technology

What paints to choose and how to calculate the consumption correctly

Plastering and painting of walls, choosing tools:

Painting of decorative plaster # 8211 technology and methods

How to paint non-uniform decorative plaster?

Coloring bark beetle in two colors

About the cons of the bark beetle

Minus number 1. Difficult to paint.

Minus number 2.

How to paint a bark beetle in two colors

Another way to paint decorative plaster