Big tree with your own hands. DIY decorative trees: ideas and master classes

All photos from the article

What can you use to make a decorative tree on the wall? In this article we will get acquainted with several ideas for decorating living rooms using stylized images and relief figures of trees on the walls. In addition, we learn that decor can be made not only beautiful, but also functional. So, let's go.

Design principles

Let's start with a short excursion into theory.

It’s useful to know if you want to use the decor of a room to adjust its visual perception:

A tall tree silhouette image with a small width will make your ceiling appear taller, but will visually reduce the horizontal size of the wall.
Wide and spreading decorative weeping trees or an image of a low grove the width of the entire wall will provide the opposite effect: the wall will appear wider and lower.
The predominance of light colors in the background will make the room as a whole more spacious.
The opposite is also true: a light pattern on a dark background will make the room appear more compact.

However: dark walls with a light ceiling dramatically increase the apparent height of the room.

Flat images

The simplest scenario is a one-color pattern applied to the wall. You can get it in several ways.

Dye

Even if you are completely deprived of artistic talent, transferring the silhouette of an existing image to the wall will not be a problem.

Here are a couple of the most obvious solutions:

Divide the printed picture of a tree into squares of the same size.. Draw the same number of squares on a constant scale across the entire wall. Transfer the outline from the sheet to the wall, filling square by square.
Use a simple projector - a lamp with a reflector - to project a silhouette onto the wall.. Fix the sketch of the silhouette with tape on a vertically installed glass.

How to make the contours of a single-color drawing as clear as possible? It's as easy as pie: use masking tape. First, cover the outside of the image with it and paint over it; then repeat the operation, protecting the dried one with tape.

Outline pictures

Instead of dye, you can use ready-made paper and vinyl applications. They are sold with an adhesive layer already applied; Simply peel off the protective glossy paper and the drawing can be glued to the wall.

Note: rough coatings with low adhesion (including water-based paint and lime) must first be primed with acrylic penetrating primer.
In particularly advanced cases, PVA glue is applied to the back surface of the application.

Relief images

Of course, they look much more convincing than flat ones; however, creating a relief picture with your own hands will be noticeably more difficult. What could serve as material for it?

Textured plaster

This is the name of a plaster composition with the addition of large mineral grains, which, when rubbed, leave deep scratches in it, imitating the natural unevenness of various natural surfaces.

The acrylic mass (a more durable cement composition should not be used indoors) is applied inside the contour transferred to the wall and limited with masking tape with a spatula; texture is imparted to the plaster by parallel or chaotic movements of the trowel. Then the edges are cleaned with a knife.

After forming the relief silhouette, the dried coating can be painted with any water-soluble paints; As an option, you can pre-mix the acrylic mass with the pigment.

A more complex option is to form a full-fledged complex three-dimensional image using a narrow spatula and knife.

Did you know that decorative trees of “natural origin” may not always be appropriate in the home? This applies to both large private properties and small apartments. For example, instead of evergreen shrubs or dwarf trees in the garden, you can build several large “century-old” artificial ornamental trees, which will then be used both as architectural garden decoration and as supports for vertical gardening.

Incredibly, this tree is not real

For example, you can order it from frame polymer concrete. Today there are companies specializing in creating such trees - strong, tall, and capable of supporting the weight of natural plants. Weaving or climbing perennials will look especially impressive on their trunks.

Such ornamental trees are good for private areas; But what should the “unfortunate” owners of apartments who do not yet have their own plot of land do? There is always a solution: today you can “grow” a tree even in your small kitchen!

DIY coffee tree

If you want to somehow diversify your interior (especially caring housewives strive for this), then you can try to make a decorative tree with your own hands - in this case, there is no special waste, and you are guaranteed pleasure from the process and the final result!

So, how to make a decorative tree at home? To create a coffee tree you need the following materials:

tree branch (any);
yarn and regular sewing threads in green or yellow;
balloon;
bean grains;
silicate glue (ordinary stationery glue can be used, but not PVA);
glue gun;
tube of Moment glue;
flower pot or flowerpot;
a handful of small stones.

All is ready? Then go ahead!

Frame

The balloon needs to be inflated and secured with thread, and then wrapped with yarn (remember how our mothers and grandmothers used to make decorative lampshades for lamps?). In principle, you can take any yarn, as well as its color - but preferably darker, so that the color of the “wood” does not contrast with the color of the “coffee beans”. You should try to wind the yarn as tightly as possible - you will subsequently have to glue the “grains” onto this frame, so it must be strong enough.

Birch in autumn, height 43–44 cm

After winding the yarn onto the ball, it should be thoroughly coated with office glue - PVA glue will not work, because it takes a very long time to dry and leaves behind white stains. The coated ball must be dried (to do this, use a hair dryer with a warm stream of air) so that the glue sets faster. After making sure that the glue has completely dried, the ball can be “deflated” and pulled out through the small hole cut. “Krona” is already ready.

By the way, some fans prefer to make decorative trees with their own hands, using not balloons, but children's plastic balls (the kind you can find in playrooms today). True, the ball will be bright, so you will have to wrap it in several layers of nylon stocking or thick dark fabric so that the bright color does not show through the bean grains. You can buy such a ball at any kiosk with children's toys - they are sold individually.

Trunk

Almost any branch is suitable for the trunk, as long as it is strong and stable. If you have a twig of an apple tree, that’s generally great: the apple bark itself looks great, and you don’t have to decorate it further.

So, the “crown” is already there, and so is the “trunk”. You need to attach it to the frame as quickly as possible and very carefully, since the frame is quite fragile. To do this, you need to insert a twig into the cut hole and secure it to the “top of the head” (a drop of Moment glue should be placed on the tip of the twig), and fill the hole itself with sealant from a gun. Next, you will have to wait until both the glue and the sealant dry.

Crown

This is perhaps the most important of all stages of creating a decorative tree. You should have a glue gun and bean seeds on hand. The beans must be dark to give the appearance of a coffee tree. Glue will have to be dripped onto each bean so that there is no glue left between the grains. And, of course, the beans need to be glued in a dense layer - in order or chaotically, this is how your imagination on the topic of “indoor decorative trees” will manifest itself.

Spring birch, height 41–42 cm

Stand

We use an ordinary flower pot as a stand (some aesthetes prefer beauty in everything, so they take beautiful ones instead of pots). The “trunk” is secured with small stones. And for greater beauty, they can also be decorated with yellow or green sewing threads, sprinkled with regular hairspray.

That's basically it. Such decorative trees can be placed in any corner of your apartment - and even given to friends! You'll see, they will definitely appreciate your craft!

Oh, by the way: if you are an avid coffee drinker, you can replace the beans with real coffee beans - your tree will emit a real coffee smell!

Externally, it will be practically no different from a living tree. But the advantages and benefits of an artificial tree are immeasurably greater: it does not require cultivation for many years, it does not require watering or special care.

You can decorate bonsai with such bonsai in places in the room that are far from light. The most important thing is that this pleasure does not cost crazy people.

Start creating a man-made masterpiece by finding suitable driftwood or. They can be found in the forest or in. Do not pay attention to the fact that the driftwood has minor defects; they can be eliminated during the manufacturing process of the artificial tree. So, we have selected the material for the bonsai trunk.

You should also stock up on green branches of coniferous trees. Pine, juniper, spruce are suitable. We cannot do without moss in our creativity. Moss moss is best suited. Now that the material for the wood has been selected, you can begin the conservation stage. Preservation is necessary so that the needles do not fall off when drying out, but remain in their original form for several years. Preservation will also help preserve the bright green color of the needles.

For chemical preservation, it is necessary to prepare a solution of denatured alcohol, acetone and glycerin in a ratio of 1:1:2. The solution should be stored in a tightly closed jar, as it is strong.

Wash the plant branches you collected thoroughly in water to remove dirt. Then place them in the solution for at least a week. The branches should be completely covered with the solution, and not float on its surface. At the end of treatment, rinse the plants in water. Keep in mind that with such chemical treatment, not only preservation occurs, but also bleaching of plants. In the future, the branches are subject to painting.

Treated and washed branches should be hung on the balcony (or attic) and dried for at least a week. Glycerin makes plant branches elastic and prevents needles from falling off. Dried branches can be painted.

Use oil paints, diluting them with drying oil, turpentine or acetone. It is more convenient to process pine needles using a brush or spray bottle. To ensure that the paint applies evenly, first dip the branches in hot paraffin. Paint should only be applied to needles.

In addition to branches, driftwood and dried moss, we also need glue and wire. Installing bonsai requires some skill and patience. As a result, we should get a composition that is as similar as possible to a living tree.

Cut the branches to length and glue them to the tree trunk, the role of which will be played by the snag. Use wire for fastening. Later, when the glue dries, it will need to be removed. Places that have been treated should be decorated with moss. When installing your artificial tree, keep in mind that the center of gravity of the composition should allow it to be stable in its place.

If you have been careful and patient, you will soon see a composition very similar to a living tree, capable of maintaining its shape for several years. All you have to do is blow the dust off your creation from time to time.

note

But caring for a real bonsai is difficult and painstaking, while an artificial bonsai requires almost no maintenance. Unless you periodically wipe the bonsai from dust - that’s all bonsai care is. Of course, you can make an artificial bonsai with your own hands using a bonsai master class. But this is difficult, because artificial bonsai requires special materials.

Helpful advice

Your home business for growing and selling bonsai! If you are not burdened with money and have creative potential, and your head and hands grow from the right places, then you simply need this book! I propose to learn how to grow and make artificial bonsai with your own hands. We will teach you bonsai technology, how to grow bonsai with your own hands. You will learn what care is needed for bonsai. You won't need to look for where to buy bonsai, you will sell them!

Sources:

How to make bonsai with your own hands
DIY artificial bonsai

The art of growing decorative bonsai trees increases the number of its fans and followers every year. If you decide to try your hand at growing and creating bonsai, then these instructions will help you understand the intricacies and tell you where to start.

Instructions

Choose a suitable container. To maintain a presentable appearance, it is best to choose a bonsai that is no less beautiful and fits into the “entourage”. You can make it yourself or buy it at a flower shop. Make sure it is deep enough and has large holes to drain water. If your bonsai has a small lawn, water will need to be used a lot and often, so good drainage is very important.

Hello, dear site visitors! For the creative readers of our blog, today is a wonderful idea for making a decorative tree with your own hands from our wonderful site wizard Alena: “To decorate a child’s room, you can make a rainbow tree from a pompom. Such pompoms are often used to make children's toys. By the way, such a tree can be made together with a child, developing his creative abilities from an early age.”

To make a decorative tree we will need:

Leftover yarn in different colors (I used Bambino yarn)
Wooden skewer for the trunk
A piece of foam
Multi-colored beads
Small flowerpot
Cardboard, scissors, compass
Decorative birds and leaves

How to make a decorative tree:

First of all, draw a circle with a diameter of 10 cm on cardboard with a compass, inside the circle draw a circle with a diameter of 4 cm, you get a ring. Cut out two such blanks, fold them together and wrap them tightly with yarn of different colors. The tighter you wind the yarn, the fluffier the pompom will be. Using scissors, cut the threads along the outer edge between the two circles of cardboard. Then pass the thread between the circles and tighten tightly. Remove the cardboard blanks from the yarn and shape the product into a ball.
Cut the foam to the size of the planter and place it in the planter. Wrap the skewer tightly with green yarn.

Attach the pompom to the skewer; this is very easy to do, since the pompom is soft. Place the other end of the skewer in the center of the pot. Well, now decorate the tree as your imagination tells you. Use beads, leaves, decorative birds or butterflies for this.

This is the decorative tree our craftswoman Alena created!

I also suggest watching a video on how to make a decorative tree - topiary with your own hands

People have been decorating their homes with their own hands since ancient times. At first, craftsmen used the gifts of nature for this, then they learned to make things from metal, and in the era of the development of the chemical industry, many synthetic materials appeared, which are successfully used in modern design.

Of course, it is stupid to refuse the conveniences that have appeared with the development of industry and new technologies in the production of furniture and decorative items, but I really want to revive the house, create a special atmosphere of comfort and peace in any room with the help of natural materials! And the best material for this at all times has been and remains His Majesty wood.

Real masters create magnificent carved panels, exclusive solid wood furniture, and amazing paintings in the marquetry style. To implement the most daring ideas in the interior, you need skill, artistic taste, special tools, knowledge and skills. But anyone can make simple decorations with their own hands.

Beautiful wood decor

The easiest way to use wood is to abandon plastic frames, install wooden doors, and purchase furniture made from solid wood. This material has the ability to breathe. Wooden frames on the windows will help maintain a pleasant living atmosphere in the room.

A furniture set made of natural wood can give any apartment a feeling of good quality, prosperity, and act as an independent home decoration. True, not everyone can afford such luxury. However, even a few items can change the look of a modern apartment. They look very advantageous in any interior:

a coffee table, the surface of which is decorated using marquetry techniques or cuttings of valuable wood;

a chair hollowed out of solid wood;

wooden stands for house plants;

open shelves.

Option for decorating the design with wood

Modern DIY wood decor

DIY wood decor idea

Therefore, if it is not possible to furnish your home with expensive furniture, it is enough to purchase one or two products, or decorate existing furniture using decorative wood for the interior with your own hands.

When it comes to doors, there are many options. In order to isolate rooms, you can install:

Solid doors made of natural boards;

Canvas composed of slats;

Doors with glazing;

Sliding doors;

Screen doors in the common room, folding like an accordion.

The last two options can significantly save space in small rooms. You can make such doors yourself, or order them from an experienced craftsman.

DIY wood decoration

Beautiful wood decor

Do-it-yourself wood in the interior: advantages

Since wood is one of the natural materials, it has many advantages for making various items with your own hands:

Environmental Safety. Can be used in the interior of any room without harm to health. In addition, according to popular belief, wood has the ability to heal - for example, aspen dies relieve inflammation, and oak dies give strength to a weakened body.

It’s practically free: it’s literally lying under our feet - snags and dried tree branches that can be found in the nearest forest will be used. Summer residents most often burn waste resulting from cleaning and thinning the garden. Or you can not burn all these pieces of wood, but make beautiful accessories out of them that can add individuality to your interior, giving it its own soul.

The ability to create wood decor with your own hands. Nature is unique, and you will not find two absolutely identical branches. Therefore, when working with natural materials, you create unique things every time that will give your home its own special style and appeal. In addition, there will be a reason to brag to your friends about your imagination and skillful hands.

Option for decorating the design with wood

Modern DIY wood decor

DIY wood decor idea

Home decorations made from wood slices

Anyone who knows how to hold a hammer and other simple tools in their hands can process wood with their own hands for the interior in order to obtain a suitable material. The wood can be cleared of bark in advance, or left in its original form - it all depends on what types of wood you have and where you are going to stick the wooden dies.

Here are just a few ideas where regular wood cuts can be useful in the interior:

finishing the walls with sections of logs;

furniture manufacturing;

decoration of individual pieces of furniture with wooden dies of various diameters.

DIY wood decoration

Beautiful wood decor

DIY wood decor for walls

If you decide to use wood to decorate the walls, you can do it in two ways:

cover the surface of one or all walls in the room with wooden dies;

select a separate section of the wall and decorate it in the form of a panel.

The first option is not suitable for every room - it will fit better into the interior of a veranda, corridors, country-style kitchen or home bathhouse. But to decorate a separate section of the wall, you can show all your imagination. It can be:

Kitchen apron or panel above the work area. Beautiful saw cuts are obtained from different types of wood - apple, pear, plum, cherry, walnut, ash, where each has its own unique color. All you have to do is sand the surfaces of the dies well and cover the bright canvas with a protective layer of colorless varnish.

In the interior of a children's room, beautiful panels made of wooden saw cuts, made in the form of stylized butterflies, flowers or an entire fairy-tale landscape, are appropriate.

To decorate the walls of a spacious corridor, you can take wooden driftwood found in the forest, treated by time and nature. If you make cuts from them, leaving one side untouched, then you will have strange flowers on one of the walls, each of which will be unique in its natural beauty.

Option for decorating the design with wood

Modern DIY wood decor

DIY wood decor idea

Transforming furniture

To decorate a wooden interior with your own hands, you can use pieces of old furniture that you already have. Decorated with dies of different types of wood, it will acquire a second life and fit perfectly into the interior.

The main rule that should be followed is that all work must be carried out without haste, very carefully, in order to obtain the desired effect:

Select branches of the desired tree species of small diameter;

Dry them well, remove the bark if necessary;

Cut dies of equal thickness using a jigsaw or grinder;

Sand the cut surfaces with sandpaper on both sides;

Prepare the furniture that you are going to transform: clean it of old paint, varnish, level the surfaces with sandpaper;

Attach the cuts with wood glue - wood glue or PVA.

Let it dry thoroughly, then coat the treated surfaces with clear varnish.

This way you can decorate a chest of drawers, an old wardrobe, a table and other pieces of furniture.

DIY wood decoration

Beautiful wood decor

Decor items

In addition to the techniques already listed, you can make other decorative items from wood with your own hands. Amateur photographs or small pictures placed in frames made from thin twigs look original in the interior of the office. You just need to cut 3-4 thin branches, slightly longer than the size of the photograph, and tie them around the perimeter at the joints with a regular rope or twine.

Using the same principle, you can make a pencil stand:

Cut off the top of a plastic bottle or tin can to create a cup where you can put pencils.

Cut thin branches so that their length is slightly greater than the height of the resulting glass;

Glue them on using a glue gun and tie a few turns of twine or string around the top.

Option for decorating the design with wood

Modern DIY wood decor

DIY wood decor idea

With a little imagination and ingenuity, you can make a phone stand using twigs, a plastic bottle or a juice can. And if you work a little, you can, using suitable solid cuts, hollow out an iPhone docking station or an original candlestick.

Saw cuts of a suitable diameter can be used to make your own:

original coasters for cups in the form of topographical symbols;

from a bottle of an unusual shape of an original vessel, covering its surface with wooden dies;

hot stands, the basis for which can be a plywood sheet of any shape.

DIY wood decoration

Beautiful wood decor

A wine bottle covered with a wooden cut can be used as a base for a lamp in an eco-friendly interior. It is suitable for a lampshade made of ordinary cotton rope, which needs to be wound on a ready-made metal or wooden frame.

We have offered you just a few ideas for DIY wood decorations for your interior. There are many more options for how to make wooden decorations and beautiful accessories with your own hands using other gifts of nature. It all depends on the overall design, your imagination and the materials at hand.