Do-it-yourself robot made from cans. What can be made from the keys of beer cans

In most cases, items made from available materials play the role of room decor, but if you think carefully and connect your imagination, you can get a useful little thing for the home.

Can lamps

From an ordinary drink can, it is easy to make an original ceiling lamp for a lighting fixture. It will be a stylish, useful accessory in your interior. So, in order to make such a craft from a beer can, you first need to cut its bottom with a sharp knife.

Next, on the bank itself, you need to draw patterns. It can be ornaments, geometric shapes, flowers, and much, much more. Then we take a clerical knife and carefully cut out the composition according to the markup. Take precautions when working with cutting objects!

If you have paint and basic drawing skills, then you can paint the base of our future lamp or draw something on it. After finishing the work, all that remains is to place a cartridge with a light bulb in a jar and a unique, beautiful lamp is ready!

Desk lamp

You can make an original table lamp from a beer can. The jar itself will be a stand, and the lampshade for the lamp is made of tongues, for which we open the drink. Using wire cutters, open the tongue in one place and thus connect them together, like links in a chain.

There are many such elements for a lampshade. It is necessary to “weave” a rectangular canvas about 40x15 cm in size. Close the rectangle into a cylinder, install it on the base and mount the bulb holder. This lamp will decorate any apartment.

Crafts from tin cans to give

For a country house or plot, you can also make many decorative elements from aluminum cans. You can even make furniture out of them! For example, a chair. Put the cans on top of each other, connecting them with glue, gradually forming the seat, back and armrests. In the same way, you can build a small table.

To make furniture items stronger and more stable, fill each jar with earth or sand.

Travel burner

You can make a burner out of a half of an iron beer can. This idea will be useful for those who like to travel. Such a burner can completely replace a gas burner, and its weight does not exceed 50 grams, while a gas burner weighs about 3-4 kg.

To make such a useful thing, you need to cut off the bottom with a wall height of about 10 cm. We make one large hole in the middle of the bottom, and several small ones along the edge (along the groove between the bottom and the walls). Sharp edges are slightly bent inward with pliers.

Candlesticks from cans

Iron cans from canned vegetables will fit for making a candlestick. It is enough just to cut some pattern or pattern on them. You can simply make round holes in a chaotic manner and paint the jar in any color. We put a candle inside and enjoy the romance.

Crafts from tin cans for children

Smooth, neat jars, without a sharp edge, can be painted, pasted over with paper or cloth, ribbons, beads, beads and used as a stand for stationery.

If you remove both bottoms and cut the jar lengthwise, then we get an aluminum sheet from which you can make a lot of crafts: butterflies, birds, stars and others. Draw on a sheet of thick paper, or print the finished drawing, cut it out and use it as a template. After manufacturing individual parts, you can give them a look closer to the real one. For example, make incisions on the wings of birds, or the openwork edge of the wings of butterflies and paint them with multi-colored paints.

Possessing creativity, desire and imagination, you can make many items that will warm and please the eye. Thus, you can make a gift for a loved one, because there is nothing better than a present made in the hand made style.

Where some people see garbage, others see recyclables that need to be recycled and thus give them a new life. But the creative mind sees endless potential in every discarded toothpick - and even more so in cans of fizzy drinks! Did you know that with the help of scissors, a can opener, and a little effort, tin cans in your hands can become anything?

beer garden

In the hands of Chicago-based artist Christine Eige, soda cans literally bloom into exotic flowers. “The main idea of my work is the principle of sustainability: reduce consumption, reuse and recycle. The less waste we have in landfills, the better! All my works are 100% made from materials that were sentenced to a landfill and were already on their way to it, ”the craftswoman shares her experience. Christine's elegant lilies and roses look so real that it's natural to lean in and breathe in their sweet scent. True, there are carnivorous plants in her picturesque collection - don’t put your finger in your mouth like that! The charm of tin colors can be used to decorate a flower bed, decorate the interior of a house, or - quite naturally, turn their original brooches and hairpins in no time.

If you ever get the urge to create something flowery with colorful drink cans, you can practice on something simple first: cut out a few stenciled "daisies" and assemble them into layered flowers. Then you can organize a wreath from them or decorate something with them.

Pictures from tins

Jeff Ivanhoe (Jeff Ivanhoe) from Arizona creates paintings from aluminum cans of beer and soda. He cuts them into small rectangular pieces, which he then uses as material for his eco-friendly mosaics. The artist devoted about thirty years of his life to this occupation and even gave a separate name to his hobby - "aluminum mosaic" (AluMosaics). Decades of practice, as we see, were not in vain: Jeff's works, even made without paints and brushes, amaze with their truthfulness and impeccable selection of the smallest details.

original jewelry

It turns out that tin can valves are a favorite material for crafting among many hand-made craftsmen: a convenient shape makes it easy to assemble them, like buttons, on a fishing line, thread or ribbon. So you can assemble bracelets and necklaces, belts and hair garters, key chains and necklaces in a few minutes. The jars themselves are useful for crafts of a different kind: you can cut earrings, pendants, pendants for key chains, parts for brooches and much more from the walls. No material investments: the jar is undergoing metamorphoses, nature remains clean, and you get cute little things that you can please yourself, friends and loved ones. It's not about the price of the gift - but about his ingenuity, the excitement that he carries in himself!

Unusual "matryoshkas"

The British street artist behind the pseudonym "My Dog Sighs" finds tin cans thrown on the streets - most often already crumpled and gathering dust on the side of the road. He draws funny pancake-like "faces" on the bottom and returns them to where he found them - now it's not garbage anymore, now it's street art! Positive "sculptures" are not only able to cheer up passers-by, but also draw attention to the issues of the culture of everyday life (someone else has not heard of garbage cans?!), and also remind you of the need to dispose of garbage - or re-qualify it.

Sculptures from cans

Fantasy, courage and skill - these are the ingredients for success for those who create such amazing gizmos from junk material. The collection of tin miracles does not end there - but for now, let's just admire these miracles of trash art!

Today, we throw a very large variety of packaging products into the trash can every day, however, some products can be a good source for doing all sorts of DIY crafts.

So, as an example, you can take an empty can of tin from lemonade or beer. For the most part, crafts from cans serve as a decor, but if you turn on your imagination and fantasy, you can build something useful and usable for the home.

Review content:

Do-it-yourself lighting fixtures from cans
Country interior decoration
Can alcohol burner
Candlestick-flashlight from a beer can
Butterflies from beer cans and other figurines
Photo crafts from cans

Do-it-yourself lighting fixtures from cans

Practically any jar can be usefully used, for example, it is possible to make a very stylish and original shade for a lamp. Therefore, the first step is to remove the top of the bottom of the can, using ordinary scissors or a clerical knife.

Next, make special markings with patterns on the walls of the can, which will have to be cut out with a clerical knife. This must be done very carefully so as not to get hurt.

If you have a penchant for drawing, then the jar can be colorfully painted or simply painted on the inside and outside. After that, it is necessary to mount a cartridge with a light bulb to the bank. Everything, a bright and unique lamp is ready for use.

You can also make an interesting and beautiful table lamp from beer cans, which can decorate the room with its unusual look.

So for the manufacture of a lampshade, it is necessary to use only the tongues from the cans, but for the lamp stand, you can use the tin itself. To connect all the tongues from the cans into a single and unified structure, a small incision must be made on each tongue, after which all the tongues must be connected to each other, and then the cut point must be reconnected.

Country interior decoration

A very interesting application for tin cans can also be found for country use. So, for example, they can be used in the manufacture of garden furniture, an armchair and a table, it is a very good idea to use empty aluminum cans.

So, in order to make a chair, you need to connect all the cans together using a very powerful and reliable glue. For a more stable position of the chair, and so that it does not deform from the weight of the person sitting on it, it is advisable to fill each jar with sand after gluing.

Can alcohol burner

Also, for many amateur travelers, it is very important to provide everything necessary for hiking, especially a burner. Therefore, many tourists independently make alcohol lamps from aluminum cans, which are quite capable of replacing a conventional gas burner.

It is worth noting that the weight of a home-made spirit stove hardly exceeds 50 grams, while a gas burner weighs about 3.5 kg.

Candlestick-flashlight from a beer can

So, to perform such crafts on the jar itself, you will have to make deep vertical cuts at a distance of 3-4 cm between them. This process is carried out with a sharp knife, it is necessary to cut carefully slowly, if necessary, you can use a ruler for a more even cut.

After the jar is cut, it must be gently pressed down a little from above, resulting in an interesting flashlight design. If you do not like the color scheme of the candlestick, then you can paint it yourself with a special spray in the color you need.

Butterflies from beer cans and other figurines

It takes a lot of patience to make this kind of craft. So, from an empty tin, you need to remove two bottoms. The result is a rectangular sheet of tin.

Note!

Carefully cut out the finished shape with scissors along the contour of the pattern, for example, a butterfly.

When the shape of the butterfly is ready, you can give it a more natural look, give the wings a little lively look and decorate the butterfly a little in a bright color.

Thus, before throwing away an empty aluminum can of beer or a drink, think, if you just turn on your imagination and imagination, then you can make useful crafts from tin cans, many beautiful and useful things that your relatives and friends will appreciate.

Photo crafts from cans

Note!

There are so many different things that at first glance seem unnecessary. But if you take a closer look at them, it becomes clear that they can be given a second life. In this review, we will show different crafts from tin cans. This is just the very example when a thing seems absolutely unnecessary, but in fact it can be well attached to everyday life.

What to do with tin cans with your own hands

Vase under cut birch

To make a vase, you will need a can of coffee or baby formula. First you need to remove the label. Next, we take birch bark, they are sold in stores for creativity and paste it over a jar. It is comfortable to glue the bark on polymer glue.

Vase from a metal can.

Christmas tree

You will need cans of the same size in the amount of 17 pieces. We remove the labels from the cans, and in their place stick our own labels cut out of scrap paper with a New Year's print. We lay out the jars on the table, so that in the end we get the outline of the Christmas tree. Glue them together with a glue gun. Inside all the jars, with the exception of the two lower ones, we glue Christmas balls. We set up the Christmas tree on the floor near the wall.

Creative Christmas tree made from waste cans.

Bird feeders

Glue twine on top of the can for future hanging of the product. Next, glue the entire jar around the perimeter with a similar twine. You can glue on polymer glue or a glue gun. Tie the ends of the upper rope together. We bend part of the lid of the jar inward, and fill the feeder with food.

Bird feeder from a can.

Mini roaster

We cut the jar on top with scissors for metal into strips. We bend all the strips to the sides, remove part of the bottom from below, put dry fuel inside and set fire to it, wrap the workpiece with foil, fill it with stones, lay the grate on top. You can fry sausages. If the tablet goes out, you need to raise the brazier and set fire to it again or replace it with another one.

Mini barbecue.

The music of wind

It is necessary to prepare jars of different sizes. Each of the cans can be painted as desired in different colors. Further, in each jar, from above, it is necessary to drill a hole into which to thread a long dense twine. At each level, inside the jar, the twine must be tied into a knot so that it does not pop out. Well, fasten the ring from below.

New Year's vase under Santa's suit

We take a large tin can, paint it red. Then we wrap it in the center with a black belt with a buckle. So that the belt does not move out, it is better to glue it. And from above and below the jar can be covered with PVA glue, and sprinkled with white sparkles.

Vase in the style of a Santa Claus costume.

Christmas decorative ball

To implement this idea, you need a glass round lampshade from a ceiling lamp. Next, take a tin can, remove all labels, drill a hole in the center with a drill. We screw the pin here and paint it silver. We glue the finished structure on top of the glass lampshade.

Decorative Christmas ball.

Organizers

You can also make different organizers for storing stationery or kitchen utensils, you can see examples below (photos are enlarged).

Ashtray

From under a can of beer or Coca-Cola, you can make an ashtray. You will find all the stages of its creation below in the photo.

Hanging candlestick

We clean canned food from labels. We take one of the jars and glue a piece of twine to it, wrap the jar around the perimeter with this twine so that the ends of the rope come together on top. Paste the jar on top with a piece of scrap paper. We decorate the jar with a twine bow, gluing it with a glue gun. We prepare the required number of cans and hang them on a hanger. We fix the hanger on a carnation hammered into the wall. Inside each jar we put a candle-tablet. Attention! Do not leave candles lit unattended.

Openwork candlestick

On a sheet of paper you need to draw a pattern, according to the size of the can. We apply this drawing to the bank, fix it with tape. We fill the jar with wet sand, and punch holes with a hammer and nail, according to the pattern placed on top. We remove the sand, paint the jar in the desired color and create a loop for hanging from the wire.

How to make an openwork candlestick from a tin can.

Shelves

We paint the jars inside and out in the desired color. Next, coat the bottom of the jar with PVA glue, and seal it with a circle cut out of scrap paper. We fix the finished shelves on the wall with special Velcro, designed for hanging pictures.

Mini shelves.

Shade

All stages of the formation of such a lamp can be found in the photo below. It's easy to make and looks very effective!

DIY lamp.

Candle in a jar

We melt the wax, fix the wick inside the jar, pour in the wax. We are waiting for the wax to harden, and we can use it.

Candle in a tin.

three tiered vase

We take jars of different sizes, paint in the desired color. We cut the tube from the foil into equal segments, and glue it below the small jar, and below the middle jar.

Three-tiered vase from canned food jars.

garden lantern

We fill the jars with wet sand, grinder or knife, create cuts along the jar. We paint them in the desired color. We put a couple of books on top of the can and press on top, the product will bend and take the desired shape of a flashlight.

Coffee tin lanterns.

Stilts

For a child, you can make cool stilts. We create two through holes above the bottom of the can, thread the twine inside, and glue the lower part of the can with electrical tape so that the edge of the product makes less noise when walking and does not spoil the floor surface.

Flower pot

You can simply paste over a tin can with a piece of fabric, and glue a bow in front, and now the flower pot is ready for use.

Flower pot.

Watch

Drill a hole in the center of the jar. Below we glue the legs - corks from wine bottles. We paint the blank in the desired color and install the clockwork (sold in stores for creativity).

Do-it-yourself watch from a tin can.

Another example of a watch made from a tin can and ribbons.

Ottoman

We select the same tin cans. We install one in the center, and six others around the perimeter. All banks are well wrapped with tape. We form the bottom of the cardboard and the top. These parts are also fixed with tape. We glue the synthetic winterizer around the perimeter of the future pouf. We sew a pipe from the fabric according to the size of the product, pull it over the ottoman, and glue the upper and lower parts of the fabric by gathering. We cut out the cover from the cardboard, lay the synthetic winterizer on top and wrap it around with a round piece of fabric, glue the edge of the fabric to the inside of the cover. We glue the lid to the ottoman, and glue the connecting edge with tape.

In order not to lose sight of the overview, click on the buttons of social networks.

The word "crafts" is perceived as something frivolous: so, pampering. Skepticism increases if junk material is used for them. Let's debunk this myth. You can make some really wonderful things for the garden out of tin cans. They can really become a real decoration of your site. Especially if you use all your creativity and some tips.

Many foods keep best in tins. Here the industry also adjusted their release. The disposal of this container is still lame, and the banks began to accumulate.

Tin is an excellent craft material. It is perfectly cut with simple tools, bends well, lends itself to coloring. When connecting parts from it, there are no problems. Therefore, the craftsmen could not pass by such a find and came up with many ways to reuse this container.

Ways to use empty tin cans for decoration

In landscape design, the use of cans is practiced in two directions:

Production of decor for external design (garden sculpture and artistic elements of the garden);
Designing practical things (fences, garden furniture and buildings).

It is not always possible to clearly distinguish between them: decorative things can also have a utilitarian purpose, and functional ones can have an aesthetic value.

You will see varieties of crafts from plastic bottles for the playground.

What can you do with your own hands to give

Tea, coffee, flour, biscuits, canned food and liquids are packed in metal containers. There are a few general rules when working with this material:

You need to work with gloves (sharp edges can damage your hands);
Only clean jars can be used (do not forget to wash the material and remove the labels).

If you have collected a certain number of cans, then you can start making decor.

Decorative planters for the garden

This is the most common and favorite way for all summer residents to use tin containers. It is better to take larger containers. It's good if you find containers from restaurants.

Manufacturing steps:

File the top edges. They are quite sharp and easy to cut. You can bend them with tongs or other tools. The sealant applied to the cut will help to cope with the task.
Make drainage holes in the bottom of the jar. To do this, you can use a drill or pierce them with a sharp nail with a hammer.
Paint the jar the right color. For better contact of paint with metal, the walls must be rubbed with a metal brush and a primer applied.
Decorate the planter according to the style of the site.

Such flower pots can be installed on the fence, they will perfectly decorate a blank wall, look good on flower beds and lawns. Practical owners will love the idea of making a vertical garden out of these hanging structures.

What are crafts from polyurethane foam will tell you.

The manufacturing technology of do-it-yourself hanging outdoor flower pots is outlined.

iron lanterns

With romantic tin lantern garlands, your garden will turn into a fairy tale. They can be used for decorative lighting of a corner for relaxation or hung on trees.

Manufacturing steps DIY lanterns:

Fill suitable jars to the top with water and put in the refrigerator in this form. Remove only when the water has completely turned into ice. A frozen can is easier to work with.
Draw a pattern on the outer surface of the jar with a marker.
Make holes along the marked lines. To do this, use a hammer and a nail.
Wait for the water to defrost and erase the marker.
The lamp can be painted or even painted.

If you plan to hang the product, then you need to make a handle. To do this, make two additional holes near the upper edge and pull the wire into them. You can put a decorative candle inside the lantern.

Crafts from canned food

There are more and more canned goods on our tables, and the number of cans from them is increasing. They cannot be brought to some kind of standard. They are all different sizes, colors and shapes. This makes it possible to be creative in their use.

How to make a cold smoked smokehouse is described.

Aluminum bird feeders and birdhouses

Crafts can benefit your garden. Make a bird feeder or birdhouse out of a jar. There is nothing complicated about this, and the birds will be grateful.

Manufacturing steps:

Mark a hole in the can with a marker. Cut it out with a knife.
Treat the cuts with silicone or paste over with tape or tape.
Decorate the item.

garden metal sculpture

Figurines from empty iron cans can bring zest to the decor of your garden. In sculptures, it is better to use jars of different sizes and shapes. Canisters, metal buckets, spray cans are also suitable.

Angular material suggests the use of prototypes with the same character. Robots, aliens and lumberjacks made from cans look good. We will consider the technology of manufacturing a lumberjack in more detail.

Materials:

1 large jar or canister for the torso;
2 pairs of cans for arms and legs;
1 bank for the head;
2 rectangular cans for shoes;
Bank for a hat (you can use a watering can).

Manufacturing steps:

Pick up the required amount of material.
Coat all cans with primer.
Paint the parts a light silver color with automotive spray paint. You will need 1-2 cans. It all depends on the size of the lumberjack.
Connect parts with bolts and nuts. Holes for them must be pre-drilled in the intended places.

Sometimes holes are made with nails. So that the jar does not wrinkle, you need to put it on a wooden block, and only after that punch holes with a hammer.

A lumberjack can make a girlfriend, collect a dog from cans. Children can be involved in decorating the sculpture. They will better tell you what else your creation lacks.

Crafts from beer cans

Beer cans are aluminum and tin. So it is customary to call not only cans from beer, but also from water and other drinks. Such a container appeared in the west, and, accordingly, the first crafts were made from it there.

So in Houston, the house of beer cans of John Milkovich was officially recognized as a landmark. The walls of the building are made entirely of beer cans. For cladding, the author used cut cans, which he made flat. All buildings near the house, including the fence and the dog kennel, are also made of cans. The house is habitable. Few people will go to such a construction site, but details can be introduced when decorating a garden plot.

How to make a swan from a tire is described.

Beer cans are used for:

Framing devices for sandboxes and flower beds;
construction of fences;
Installation of a collector for heating water;
Facing of roofs of arbors, canopies and other garden constructions;
Production of garden sculptures and decorative elements.

beer can flower

Such flowers will decorate the garden even in the cold season. Production will not take much time. You will need super glue, scissors and flower patterns.

Manufacturing steps:

Cut the jar lengthwise.
Cut off the bottom and top. The canvas is ready to use.
Draw on the canvas the petals of the future flower.
Cut out the details with scissors. You need to work carefully.
Squeeze lines in the form of veins on the petals.
Paint the petals and leaves in the desired color. You can use acrylic or oil paint, automotive paint is also suitable.
Collect the flower and glue the parts.

Using the same technology, you can make a wide variety of garden decor.

roof tiles

Banks are so well cut that they are cut into strips and weave different products from them. You can also make silver tiles from a jar cloth. To do this, you need to make a press to give the sheets the desired shape. Suitable form in the form of strips of two parts. They must be joined together so that the sheet between them takes the form of a tile. Make prints on all blanks. Such tiles are fastened with a stapler.

Beer cans fit together well. If you connect several pieces in a row, you can get a pipe. Whole walls are made of such pipes, and buildings are made of them.

More ideas for reusing cans

Plant tags. Gardeners are resourceful people. Thin tin is easily pressed through with a pointed stick. On strips of beer cans, you can write the name of the variety and attach to the plant. No amount of rain will damage them.
Brazier. Tourists love to make various mini-braziers from cans. On such a device, you can quickly heat tea or fry a sausage.
Stilts for children. Two large tin cans turn into stilts when you attach shoelaces to them.
Drums and other toys. If different cans are connected to each other in the same plane, then you get a drum. Children will appreciate such a musical instrument.
Skittles or cubes. Cans painted in interesting colors can be used for games.
Organizers. A jar is a container, and it is convenient to store tools and all sorts of little things in it.

bottle use

Our industry pleases with a variety of packages. Glass containers are also popular in garden design:

Banks from baby food;
mayonnaise jars;
Medicine jars.

Candlesticks from mayonnaise jars

Glass is a good building material. From it they build greenhouses and build houses. While jars are not enough for serious projects, you can make candlesticks.

Manufacturing steps:

Tie a wire to the neck of the jar and make a handle out of it.
Paint the jar with waterproof paints. You can turn jars into bees, ladybugs or other insects.
Put a candle inside. Light a fire and set up a candlestick in the garden. Such lamps are especially good for romantic holidays.

Video: how to make homemade

On the video - do-it-yourself crafts from tin cans:

There are more and more jars and jars every year. Inventive summer residents come up with new ways to dispose of this packaging. They prolong the life of things that have become unnecessary, make the site more interesting and comfortable. Such hobbies are welcomed by environmentalists and craftsmen. They agree that good crafts combine aesthetics and functionality. Only in this case, the creation from the cans will delight you and your family for a long time.