Hidden heating. Decor pipes in the interior: original ideas (50 photos)

If you have a heating and gas pipe in the kitchen or in any other room that does not fit into the design of the space, then you can easily decorate it with improvised means. Today, there are a large number of ways to mask a heating pipe without disrupting the heating process. In order to complete the decor of pipes, you will need to show creative thinking. In the decoration process, it is useful to familiarize yourself with the following recommendations:

• It is not recommended to hide irreversibly communication in the house or in the apartment. The fact is that threaded connections can fail, leak. In order to restore their performance, it is necessary to have unhindered access to them.
• Risers and eyeliners are directly involved in space heating. If you use decorative boxes, then the room can become a little colder.
• Decorative casings and ducts should be easily dismantled during use. It is better to use grids that have large cells.

Popular ways to decorate pipes

Decor of heating pipes is based on the use of two popular methods. The first method involves decorating the structure using various decorative means. The second method assumes that the pipe should be hidden from the eyes of a person. Consider the most popular decoration methods today:

• Staining. This option is the simplest and therefore popular. For its implementation, you will need to choose the color of the pipe, remove the old paint and apply a new coating to the surface. What paint to choose? Alkyd paints are great for heating pipes. In this case, you do not need to carry out a primer for staining. It will be enough to remove dust and dirt from the surfaces.
• The use of decorative coatings. The pipe can be wrapped with jute or hemp rope. This option has a drawback: the riser is insulated. You can also use the bamboo trunk for decoration. Only it should be split along and glued parallel to the vertical pipe.
• Use rings on the floor and ceiling. Such rings will not impede the repair work.
• Drywall boxes for disguise. Gypsum plasterboard should be sheathed frame made of galvanized profile. In the future, it can be painted or pasted with wallpaper.
• Installation of false walls. This method is combined with wall insulation. On the base wall, you will need to collect the crate. Between its profiles, insulation is fixed. After the construction should be sheathed with drywall or any other material.
• Use cornices or drapes. This option is simple and safe. The cornice should be installed in the entire width of the wall located near the window. The drapery of the wall is carried out using dense curtains from one corner to another.

Interesting design solutions for pipe decor

If you decide to do your own pipe decor, then you will first need to familiarize yourself with a wide range of design solutions. Staining is the most popular method. You can not just paint the sanitary element in the desired color, but also draw on it absolutely any pattern. Tree branches will look very impressive. Such decor is within the power of any person. Art education is optional.

Depending on the style of the room, the decor of a gas or heating pipe painted in bronze, golden or silver looks spectacular. When choosing a color, pay attention to the color of wallpaper, door, window sills.

If you are looking for the least expensive way, then try to use jewelry for decoration purposes. You can decorate the pipes with a variety of decorative elements. Materials such as ribbons, buttons, fringes, laces, fabric, fur, beads and much more are perfect for this purpose.

Try to decorate the pipe using a variety of toys in the form of animals, insects, made independently or purchased in a store. The pipe itself can be painted to match the color of the tree trunk.

The heating pipe can be decorated using stained-glass windows. At first glance, this method may seem incredible. For decor, glass or transparent plastic is used. This decoration method can be safely combined with a variety of lighting techniques. In addition, such a spectacular composition can perform the function of a night lamp in a room.

Decorating using decoupage technique

The decoration made using the decoupage technique is refined and original. This fabric or furniture technique involves cutting a variety of images. Pictures of fabric, paper or leather are applied to the surface of the pipe. Such design will help to give the room design a bright and non-standard accent.

Before decorating the batteries are processed. They are cleaned and processed with sandpaper. Then the battery is coated with enamel paint. It is necessary to measure the length and width of the pipe. After that, you can start cutting various images.

Bonding of fragments is best done using PVA glue. If the image is securely fixed, then it can be varnished on top. A drawing can be of a wide variety of subjects. The main thing is that it successfully fits into the design of the room. By the way, you can attract children to decorate the pipe. The decor will turn out bright, original and cozy.

Decor tubes in the kitchen and bathroom

If you need to hide and decorate communications in the kitchen, then this is easily done with a furniture set. So horizontal risers can be easily hidden behind a kitchen cabinet.

The vertical pipe can easily be veiled by a floor pencil case. With a small budget, you can safely use furniture that simulates real. Fake designs will help to easily hide unsightly communications that do not fit into the overall design of the room.

You can mask a gas pipe using parts of a furniture set. This method is the most optimal. You will not only hide the pipes, but also, if necessary, will have free access to the column, fittings and meter.

Decorate any heating pipe in the bathroom can also be easily and quickly enough. This can be done using the methods described above or any other. It is recommended that before starting work, clarify information about what material the pipe is made of: stainless metal, plastic, etc. Most modern materials do not need staining. If the pipe is made of ferrous metal, then it must be cleaned of old material before painting.

There are many ways to decorate a pipe. After weighing the pros and cons, you can find the best option for yourself. When choosing it, it is important that the overall stylistic idea in the room is maintained.

Any unsightly pipe can be made an original decorative element in the room. When decorating, do not forget that the heating or gas pipe should, first of all, fulfill its main functional task. If you are creative, the result will exceed all your expectations.

roomplan.ru

How to decorate heating pipes

Modern heating pipes do not spoil the interior at all. They can be mounted in special niches, hidden in wall panels or floor coverings. In some houses, the heating system is simply not available. What to do for those who have a standard heating system installed in the house since Soviet times. Such radiators not only do not fit into the interior, but also spoil the appearance of the room. How to decorate heating pipes? This is actually not so difficult. It is enough to show imagination and ingenuity.

In which cases it is necessary to decorate the heating system in a residential building:

• if the pipes of the heating system are located under the ceiling;
• large overhang radiators are used.

Features

Features of pipe decoration

Before performing independent decoration of heating pipes, it is necessary to consider the main features and nuances of work:

1. Do not completely hide the communication system. In the event of a pipe breakthrough, it will be difficult to repair them. It will also be difficult to completely replace the pipeline parts with new ones.
2. After the decorative closure of the risers by boxes, their level of heat transfer will decrease. This will lower the room temperature.
3. If the heating pipe is completely recessed into the wall, thermal conductivity of a large area will occur. This, on the contrary, will lead to an increase in the level of heat in the room.
4. When closing heating radiators with decorative boxes, do not forget about natural air ventilation. The box must be equipped with a ventilation grill that provides natural circulation of air flows.
5. Decorative boxes should be made of prefabricated structures. In this case, it will be possible to replace the parts of the heating system, repair and clean radiators.

Ways

Among the most common methods for decorating heating pipes in a room are the following:

1. Installation of pipes in wall panels, floor or ceiling surfaces.
2. Use of special boxes and panels.
3. Decorative decoration.

The heating system can become a bright decoration of the room.

Masking pipes

One of the most popular decorating methods is to install heating system pipes in a wall, floor or ceiling. Thus, the heating system will be completely hidden from view.

Note! Soviet-style pipes cannot be mounted on the wall. Polypropylene or metal-plastic pipes are best suited.

Work stages

1. Carrying out the marking and layout of the pipeline.
2. In places where pipes lie in the wall, recesses are made. When calculating the size of the recesses, it is necessary to take into account the thickness of the insulating material and the material for sealing the pipes.
3. To ensure that the pipes are securely mounted on the wall, holes are made in the recesses with dowels and brackets.
4. If metal-plastic pipes are used, a special casing must first be put on them. It will ensure the preservation of heat in the pipes and prevent its loss.
5. Removable fittings cannot be walled into the wall.
6. Pipes are laid in a special casing and mounted on the wall. It is necessary to prevent heat loss.
7. Checking the operation of the system. After the system has been tested, close the gates with a special solution.
8. In places where pipes enter the floor, it is necessary to install decorative linings.

They are presented in the photo:

Decorative pipe linings

With decorative masking of pipes and heating radiators, special boxes are gaining more and more popularity. They can be made independently or purchased at a specialized store.

Box making

Box

Decorative box can be made of the following materials:

• plastic,
• wood,
• drywall
• pVC panel.

To make a decorative box, the following materials will be required:

• scissors,
• measuring instruments
• screws
• dowels
• drill,
• lining material,
• screwdriver
• cutter.

Work Stages:

1. Marking around pipes relative to their location on the ceiling, wall and floor. It is also worth considering the size of the materials, the distance of the pipes to the walls of the box. Do not mount the box close to the pipes. It is necessary to maintain at least a minimum distance between them, which is 3 cm.
2. The box is mounted on a special frame. First of all, you need to install it. The frame can be made of wooden planks or a metal profile. Frame parts are interconnected using self-tapping screws and notch.
3. Installation of rack profiles on the wall.
4. Mounting rails on the floor.
5. Installation of guides on the ceiling.
6. Installation of corner profiles. Depending on the design, they can be 1 or 2.
7. Frame lining. You can use drywall panels or decorative tiles. When facing, it is necessary to ensure that as few joints as possible are formed.

There are also ready-made boxes for heating radiators. They are presented in the photo:

Battery Box
Radiator grilles

Using plastic panels

Another affordable way to decorate the heating system. The method consists in the fact that the pipeline does not hide in a special box, but with the help of drywall, a false wall is made, behind which the heating system is completely hidden. This method is bad in that it consumes unnecessary space in the room. This is not very advisable in small residential premises.

The advantage of this method is that when installing the wall panel inside it forms a kind of box, the empty space of which can be used for household purposes.

Using curtains

Disguise at the curtains

This method does not require special building skills. It lies in the fact that the heating system in the room is closed by curtains. This gives the room coziness and a unique design.

1. It is necessary to mount a ceiling cornice over the entire width of the wall.
2. Installing tight curtains across the entire width of the wall. Drawn curtains close the heating system. If necessary, they can be opened to transmit sunlight.

Decorative decoration

All the above methods are quite expensive. An excellent alternative to them is the decoration and decoration of heating pipes with their own hands. There are no restrictions.

Decoration

This method is especially relevant for decorating the heating system in the kitchen. The decorated pipe will become a cozy part of the kitchen interior.

Ways of work:

• painting,
• decoration,
• covering the surface with unusual materials.

Painting

When painting heating pipes, the following requirements for materials should be considered:

• moisture resistance
• wear resistance
• damage resistance
• endurance to temperature extremes,
• safety for human health.

For painting pipes of the heating system, water-dispersion-based paints, acrylic paints and alkyd enamels can be used.

It is not necessary to paint the pipes in a solid color. An interesting solution would be drawing a pattern and pattern on the pipe.

Battery painting

You can decorate the heating pipe with any decorative materials.

An example of materials used for decorating:

• beads
• buttons
• tapes
• shoelaces
• rope,
• twine,
• threads
• floss
• knitting yarn
• textile.

A simple example of a decorative solution is twine twisting. Its pleasant wood color will fit well into any interior and create an atmosphere of comfort. To make the decoration in this way, it is enough just to tightly wrap the pipe with twine and fix it.

You can also use additional decorative elements for decoration. So, on folded twine pipe, you can fix decorative foliage. Thus, the heating pipe will turn into a tree.

Twine pipe

• Decoration with bamboo. This noble natural material will look advantageous in any room. Its shape is perfect for the shape of the pipe.

You can also decorate heating pipes with any improvised materials.

Photo

Painting examples
Decor Ideas
Bamboo decor
Decoration in the bathroom Masking a pipe with shells
Decor with bamboo

Video

We offer you another idea for pipe decor.

Last revised: 02/20/2015

Related Articles

Related videos

trubyinfo.ru

How to decorate a heating pipe: a selection of ideas for practical and creative

There should not be anything superfluous in the interior - you can hide the wiring under a suspended ceiling, hide the pipes with wall panels or make wiring on the floor, and close the batteries with trellis screens. And how to decorate the heating pipe so that the ugly, but important part does not spoil the impression of repair and fits into the design? There are more than enough options for this; most of them do not require much effort and significant costs.

Decoration ideas without major repairs

Many decoration methods are so simple that even small children can handle them. Based on the proposed options, it is easy to supplement them with your own specialties and get a unique result.

Coloring is quick and easy.

The easiest way is to “dissolve” an ugly pipe in space using paints and a brush, painting the riser to match the walls. In some cases, it is appropriate to color the radiators, for example, if they are made in retro style and are an imitation of antique batteries with silver or gilding. In order not to stain the ceiling and hide a sloppy border of staining, it is recommended to put on a joint a plastic ring, invented for stretch ceilings.

The junction line is easy to hide using special rings

Floor ring

You do not need to be a great artist to turn a riser into a birch trunk and complete the picture with a lush green crown on an adjacent wall using stencils. It is not necessary to take birch as a basis, you can “plant” an oak in the room or even get away from the theme of trees and just decorate the boring “appendicitis” with ladybugs, polka dot patterns, imitation stone or blurry patterns in the avant-garde style.

"Birch" in the interior

Wood decor

Contrast staining and a bit of fantasy

Creative Ideas

If you don’t like working with paints, you can use a rope to decorate. First, the pipe is wrapped with jute or twine, and then decorated with suitable details. It can be cones, shells, sea stones, children's toys, a collection of badges, artificial fruits and flowers. If necessary, the lower part can be easily turned into a cat scratching post, having previously increased its diameter with a cardboard tube.

The heating element is hidden by a decorative rope

A riser hidden in a bamboo trunk will look very stylish. To do this, the trunk is cut lengthwise, the internal partitions are removed and the sections are ground. The blanks are put on the riser, and then pulled in several places with a rope of a suitable color. This idea can be used not only for Japanese-style housing, but also in other environmentally friendly areas. To divert eyes, it is recommended to decorate the room with several bamboo sticks.

Using bamboo trunks

It is worth a little more imagination on the topic of how to decorate the heating pipe, and among the possible options may be pipes decorated with lace, satin ribbons, stripes of fabric, lace knitted covers. The main thing is that the “clothes” should not contradict the design and not be afraid of the effects of heat.

Decor instead of a pipe

It is not recommended to glue the pipe with vinyl film, but you can first make a frame from the sleeves from the toilet paper, and then hide the cardboard under the film with a beautiful pattern. Also, paper can be painted in an unusual color, even if you don’t like it, getting rid of a bright spot will be easier than repainting a metal pipe.

Ways of decor for lovers of solidity

If you want to completely hide the signs of a heating system, you should take a closer look at more complex, but effective methods.

Decorative false columns

For interiors decorated in luxurious styles, all the “folk” methods may be too simple. In this case, it is best to decorate the heating pipe with the help of columns made of polyurethane. Half columns are easily attached to the wall with liquid nails, and if necessary, access to the pipe is not difficult to remove and return to their place. To get a beautiful interior, it is recommended to use several elements.

Columns adorn the interior and securely hide the heating pipes

The round and square column will need to be sawn, installed so that the pipe is inside, and carefully glued with transparent glue. This effective technique helps if you need to decorate a riser that is in an uncomfortable place after replanning the apartment and dismantling the partitions.

Drywall Box

For those who can hold in their hands not only brushes and a glue gun, but also have the skills to work with serious tools, there is a more difficult option - a plasterboard box. Under this capital construction, it is also easy to hide the pipes leading to the radiator. The decoration of the box is most often performed to match the walls, but sometimes creative design is found, for example, decor with artificial stone, mirrors or mosaic tiles. To build a box in the corner, three metal profiles with stiffeners, ranging in size from floor to ceiling, will be required. A very tough profile is not needed, since it is hard to work with it. To get an even design, the outline of the box is drawn on the floor and transferred to the ceiling using a special laser device or other devices. Two profiles are attached to the wall, and the third is screwed to the floor and fixed to the other two using special fasteners.

The frame is ready for cladding

The stability of the structure is given using horizontal jumpers made of the same profile. The finished frame is sheathed with drywall, cut to size. Instead of drywall, you can use MDF, laminate, parquet board, plastic panels pre-glued with a film of a suitable color.

It's time to think about finishing

In the same way, the risers are closed on four sides.

View after finishing work

Building a box requires skills to work with frame structures, if there is no such knowledge in the baggage, it is better to turn to professionals for help.

Video: example of decorating a heating pipe

teploguru.ru

Decoration of heating pipes: how to come up with an original design

Before residents of new buildings, the question of how to decorate heating pipes is usually not worth it. These necessary designs are positioned so as not to catch the eye. It is more difficult for those whose houses were built a long time ago, when more attention was paid to the implementation by heating systems of their direct function. Previously, that such necessary components of the living space can and should be "hidden" somehow, no one thought.

Meanwhile, it is not so difficult to make thermal communications invisible, it is worth showing a little imagination and choosing the right materials. Then no one will guess that in the most visible place there are once heating pipes that were once so unsightly - a decor that can be brought to life with your own hands will hide them.

Interesting decor can be a real highlight of the interior

Methods for decorating heating pipes

Suppose that in your apartment there are old heating systems, which are out of place located heating pipes: the design of such objects can be limited only by your imagination and material capabilities. We list a few of the simplest and most accessible ways for everyone to show creative individuality:

1. The simplest solution is an elementary painting of the protruding pipe in the color of the wall.
2. Investing a little more - both labor and time - will require decoration.
3. The most time-consuming is, of course, an attempt to hide pipes behind furniture or to construct a simple structure specifically for this purpose.

You can make decorative boxes for heating pipes from any suitable material that will correspond to the design idea of \u200b\u200bdecorating the room:

• drywall;
• wall panels made of polyvinyl chloride or MDF;
• laminate;
• parquet board on a rack frame.

The most popular is drywall. This material allows you to create designs of various configurations. Read about the features of its installation in the article “How to hide heating pipes”.

Some interesting ideas

Let us consider in a little more detail some design techniques that can come in handy when carrying out work on "concealment" or giving a more aesthetic appearance to heating pipes. Examples can be considered in detail in the photo.

Dyeing

Here are some examples of ready-made solutions:

1. You can try to make the pipe a part of the interior, for example, a children's room.

If you deviate from the generally accepted white color, which is traditionally painted with pipes of the heating system, you can "turn" the vertical pipe in the corner of the room into a tree. And already from this trunk go to the painting of the adjacent walls, drawing branches on them. Such work is within the power of even an unprofessional artist.

To turn a pipe into a "tree" does not need to be an artist

And since there are branches already on the “tree”, then leaves are needed. The process of "growing" on a leaf tree can be entrusted to your child if he has already learned to hold a brush in his hands. It is very easy to interest your child in this process if you periodically change the color of leaves on a home tree according to the seasons. Such a "seasonal" decoration of heating pipes will be an excellent game, combining not only unobtrusive teaching the child how to work neatly, but also a way to develop observation and love of nature.

1. In a completely different way than in the nursery, you can approach the issue of painting heating pipes in the bedroom or living room.

Here, for decoration, a noble golden tint, or restrained silver, will be appropriate. A muted bronze color will also look good. The main thing is that this color is in harmony with the overall style of the room.

With a skillful approach, you can turn heating pipes into a real work of art

You can not limit your imagination or use one of the ideas in your own way:

• An interesting technique for decorating a heating pipe is simply wrapping it with a hemp or jute rope. If you are not confused by a slight decrease in the heat transfer of the pipes, then this option can be considered.

Decorative rope

• A curious option would be to use split along bamboo trunks. Such halves can be glued into the original similarity of the casing for a vertical pipe.
• And if artificial flowers are used instead of bamboo (or along with it), such a decoration will not go unnoticed by your guests, completely hiding its "base" - the heating pipe.
• In those places where the pipes enter the floor or ceiling of the room, as well as at the places of bends from the riser to the radiators, you can install nice decorative lining on the heating pipes. By choosing the color and texture of such an ornament, it is possible to logically complete the image that was conceived.
• One of the options for ceiling lining can be rings, usually hiding the inevitable cuts that are made around the risers in suspended ceilings.
• Using drapery made of fabric similar to the curtains on the windows will give the room some charm.

Pipes hidden under curtains-threads

Stained glass window

A once fashionable way of decorating a home - a stained glass window - is returning to modern design developments. It is worth thinking about using such an unusual way to decorate a room, combining the original decorative element with the most ordinary heating pipe. A graceful partition with stained glass elements will be able to change beyond recognition the corner of the room that before it did not look quite elegant.

Decorative radiator grill

The solution to the problem of how to close batteries, which by no means always have an elegant, decorative-attractive appearance, should take into account not only the aesthetic component. What looks beautiful in the photo, in practice, can lead to a significant decrease in temperature in the house. It is important to take into account that in addition to the purely decorative function, the panel (screen, box) that helps decorate heating devices, in families with small children, also fulfills a very important functional purpose, protecting the child from burns and sharp corners of the battery. Therefore, we consider the decor of the battery in the room from the position of three specialists at once - a designer, a heating engineer, and a plumber

The problem of how to hide in the apartment radiator  and the pipe supplying the coolant can be considered in two aspects. The first is on the eve of a major overhaul, when there is the possibility (and necessity) of replacing the battery. In this case, you can choose and install designer batteries and then the question will disappear by itself, and the heating efficiency will not decrease (more on this below). For example, if we are talking about a room in a classic Victorian style, then you can not do without cast-iron batteries, powerful, massive, on a stand, with casting in sections - such radiators will become a stylish detail of the general interior.

Another thing is when the repair does not involve replacing the plumbing, in this case there are several options how and how to close the battery.

Painting

The easiest option to hide the battery is to simply paint it in the tone of the wall near which the radiator is mounted. You just need to purchase a special paint for painting batteries. This is an option when radiators fit the general style of the room

Hinged screens

Screen box

Allows you to fully decorate the entire heating radiator, while such a screen on the battery with your own hands can simply be made of wood, the diagram is shown in Fig. one.

At the same time, the box can not only hide a radiator unsightly in an aesthetic plan, but also act as an additional element of furniture, for example, stands for vases, shelves, and can become part shelving  or console. A decorative wooden box can be made so that it fully matches the style and decor of the room. Its main disadvantage is a closed top, which significantly reduces the efficiency of convection. In addition, the wood dries up when the temperature drops. In this regard, MDF screens (boxes) look preferable, which are both cheaper and more durable.

Advice!  If the radiator stands far enough from the wall, then combining the window sill and the box, you can make a bench for romantic gatherings by the window.

Plastic grilles

It’s cheap, but definitely not for living quarters, they will hide the battery / pipe, but when heated they can make connections dangerous for humans, especially if the panel (grille) is made of cheap plastic by a “gray” manufacturer.

Advice!  Plastic screens are suitable for non-residential premises, taking into account resistance to high humidity - for bathrooms.

Glass screen

The glass panel, as a rule, is a rectangular sheet made of translucent thick glass, which is attached to the wall with steel holders. Giving the opportunity to decorate the heating device in front, it, leaving open space below and above, does not interfere with free air convection. A popular solution is a glass panel coated with photo printing.

The main task of a heating radiator is to heat a room, which it performs by a combination of two methods. The first is infrared radiation, in which heat is transferred directly to objects that are located in the room. It is this thermal energy that we feel when we bring our hands close to the battery. The second method is convection, by heating the air, which, rising up, displaces the cold, thereby organizing the circulation of air in the room, which leads to a more or less uniform temperature distribution.

Therefore, it’s worth immediately deciding on the main thing - no matter what way to hide pipes and radiators in the apartment, any decor of the battery will definitely lead to a loss of heater power. A simple example - installing a glass screen almost completely blocks infrared radiation. And the more the pad (screen) on the battery has a continuous (without holes) area, the “deeper” the battery is hidden - the more significant the losses. Solid (deaf, without holes) ducts above the top of the radiator are especially unacceptable - because they block the warm air rising up. The photo below shows a particularly unsuccessful design designed to decorate the battery.

On the one hand, it still does not fulfill its role to the end - the supply pipe is very clearly visible. On the other hand, there are very small openings that significantly reduce the movement (convection) of warm air, and a solid screen (even a metal one) blocked the thermal radiation. That is why, from the point of view of heat engineering, the ideal choice is a panel made as a coarse mesh.

In fig. 2 shows a sectional view of an almost optimal lattice model for a heating radiator.

Infrared (also direct thermal) radiation, indicated by red arrows (3), passes through the grating (G) with minimal losses. It is worth paying attention to the heat-insulating screen (A), which reflects heat (part of the infrared radiation) and, instead of aimlessly heating the walls, returns it back to the room.

Cold air (indicated by the blue arrow 1), entering from below, heats up and rises. So that the heated air does not stagnate under the window sill, forming a thermal cushion that blocks convection, a visor (B) is installed, directing the air flow outward. In the upper part, it is also worth installing an injector (two metal plates), which allows you to remove heated air from the front of the radiator. It manifests itself particularly effectively at high temperatures, due to the narrowing at the top, the draft increases significantly and the volume of exhaust air increases significantly. Despite the installed grid, the total energy efficiency of such a design will be significantly higher than with a simple battery installation near the wall.

The second, no less important point is the availability of the radiator and supply pipes. It's no secret that the battery is one of the potential sources of problems in the apartment. Any radiator can leak - there are many reasons for this, from water hammer to low-quality material. In addition, given the low quality of the coolant (water), it may be necessary to remove the battery in order to rinse it - otherwise, the number of actively heating sections will be constantly reduced. So from the point of view of plumbing, the best pad (panel) on the battery should provide free access to the radiator - either not have a permanent mount, or be attached.

Advice!  At the very least, it is necessary to put a “revision” (plastic door) that will give access to the place where the pipe is connected to the radiator - experience has shown that this is the weakest point in the entire system.

How to close the battery - consider the options on the video:

Modern interiors delight the eye with exclusive design solutions, an extraordinary design of the space, and sometimes a classic combination of simplicity with functionality. In any case, engineering communications in their original form can look good only in loft-style rooms. In all other pipes are an undesirable element and need camouflage.

About how to hide the heating pipes in the apartment, worry not only the happy owners of luxury housing, but also everyone who cares about aesthetics. Openly laid communications usually look very unsightly, therefore they cause a natural desire to decorate or completely hide them. Having shown a little imagination, it is possible with the help of modern materials to give the elements of the heating system a unique decorative look.

Features of decorating pipes in a private house and apartment

The options for how to hide the heating pipes are most in a private house. The internal communications of private buildings are in no way connected with the neighboring ones and, accordingly, if necessary, they can be laid and shifted, as you wish. If the changes in the configuration of the heating system are planned in an apartment building, then you have to take into account the interests of all residents and coordinate with the operating organization.

Pipes can be completely hidden only during construction or major repairs. For this, a hidden installation in walls or in the floor is used. Pipelines with thermal insulation are placed in the strobes and covered with mortar or hidden under the moldings. In individual heating systems, floor heating can be arranged. In private houses it is convenient to hide communications between the lags of wooden flooring. It remains only to cover the places where the pipes intersect the floor with decorative overlays, as shown in the photo.

The main inconvenience to the residents of apartments is delivered by the main transit pipelines, which are difficult to hide due to their large size. In addition, having overdone with shelter, you can lose some of the heat entering the room. In order to disguise them, only external decoration techniques are suitable.

On a note:  decorating heating pipes in your home, you can not worry about changes in their heat transfer. In individual systems, room heating will remain the same, only the ratio of the amount of heat coming from pipes and radiators will change. But in apartments with central heating, you have to save every kilocalorie of thermal energy and leave the pipelines as open as possible.

One way or another, any actions in relation to the elements of the heating system affect its functioning. Before taking radical measures to transfer pipelines out of sight, you should study the full scheme of the existing wiring and analyze the possible consequences.

Important!  Hidden gasket can be used only if new high-quality pipes are used without threaded connections. All collapsible sections and fittings should remain accessible for maintenance. This is especially important in apartments where the occurrence of an emergency is fraught with flooding of neighbors.

In some cases, the best option is decorating openly laid pipelines and radiators. This allows you to make them invisible at minimal cost, without violating the integrity of the walls and floor and without changing the configuration of the heating circuit. At the same time, all design parameters of the heating system and free access for ease of operation are saved. Choosing the best way to decorate a heating pipe in a room, one should be guided by both aesthetic considerations and maintaining functionality.

5 ways to hide heating pipes

Open pipe laying does not mean a hopelessly ruined interior. Elements of the heating system can always be covered with frame structures, decorated with decorative elements or art painting. From the whole variety of options, we will highlight 5 main ways to hide heating pipes in a private house or apartment:

1. Using a protective screen
2. Installation of the frame box
3. Raised Wall Construction
4. Decorating with improvised materials or plants
5. Coloring and drawing patterns.

Let's consider each of them in detail.

Using a protective screen

The easiest way to hide heating pipes in an apartment, and sometimes in a private house. It is fast, relatively inexpensive and does not require the involvement of specialists, it is applicable even for pipes distant from the walls. It is enough to choose the model you like and fix it in the right place. Screens can be made of metal, wood, plastic, chipboard, MDF. There are many configurations in a wide variety of styles. A boring screen can be easily replaced. If you want and have the skills to work with wood materials, you can make them yourself.

Special attention should be given to screens for tempered glass radiators or transparent acrylic. They are quite durable, easy to remove, easy to clean, have a wide color gamut. If necessary, screens can be made of any size to order. You can print drawings and photographs, applying various patterns. Stained-glass screens are also used, which look very impressive with backlight. Such elements can enrich even the most sophisticated interiors.

Decorative screens can cover not only the batteries themselves, but also the pipes going to them. The main thing is to carry out the correct measurements and choose the model that best suits the rest of the interior. The photo below shows the use of backlighting in combination with a woven textile screen.

Perforated panels and grilles that are installed in the openings of frame structures are also used as screens for radiators. This option allows you to completely hide all the elements of the heating system, but is only applicable if the batteries are located in niches or if a false wall is mounted at a considerable distance from the existing one. For ease of maintenance, the screens are made removable.

Tip: sticking a foil-insol sheet behind the radiator, you can significantly improve the heat transfer of the heater and increase the room temperature by a couple of degrees. This will make it possible to compensate for the effect of the decorative screen, which interferes with natural heat transfer and reduces heat input by 5-15% depending on the model.

Frame installation   box

This method allows you to close the risers and horizontal sections that violate the overall harmony of the interior. Around the pipes, a frame is constructed of wooden beams or metal profiles, which is sheathed with plasterboard sheets, PVC panels, plywood, OSB boards, MDF or lining. The finished box made of gypsum plaster can be painted, wallpapered or tiled with ceramic tiles. The decoration with decorative stone and the use of backlit stained glass look very impressive.

Thinking over the design of the box. It is recommended to provide removable parts or openings with revision doors at the locations of threaded fittings, control and shut-off valves. It is convenient to use panels on latches or magnets. If necessary, the box can be turned into a utility cabinet or bedside table. This is especially true in small bathrooms.

Important!  It is only possible to close pipes with a dead box if they are new and hydraulic tests have already been carried out, confirming the reliability of the connections.

The dimensions of the box are taken based on their number and the diameter of the pipes. In this case, it is necessary to leave gaps of several centimeters for the free movement of communications under the influence of thermal expansion and for the convenience of maintenance. The pipelines themselves should preferably be coated with thermal insulation. It is inexpensive, and will prevent heat leakage to unnecessary heating of the interior of the box and the back wall.

Raised Wall Construction

If the heating pipes occupy a lot of space in the room or other communications are present in addition to them, then it makes sense to consider a shelter option such as a false wall. It is mounted on the same principle as the box, but closes the entire wall, and not just a part. Accordingly, it takes up more free space and reduces the area of \u200b\u200bthe room.

The main advantage of a false wall is the absence of even the slightest trace of communications. At the same time, there is no need for dirty work to gouge walls, pipes are completely hidden without dust and excess debris. If access to pipelines is necessary for maintenance or repair, the wall can be partially disassembled and reassembled without any problems. In order not to disassemble large sections, opposite to the pipes and especially their connections provide for the installation of small panels.

If a frame wall made of drywall is constructed to separate the space in the room, then it is simply an ideal place to hide communications. Between the sheets there is always free space from 50 to 100 mm, which is enough to accommodate heating pipes. Pipelines running under the ceiling can be conveniently hidden behind suspended structures.

The main disadvantage of a false wall is the difficulty of detecting leaks in an accident. Therefore, high demands are placed on the quality of the pipes and their installation. Old pipes definitely need replacing. The number of connections should be minimized. If joints cannot be dispensed with, then preference should be given to welding or crimping. Threaded connections and valves remain open or are placed behind doors or access panels.

Decorating with improvised materials

A good opportunity to hide the pipes, while maintaining free access to them, gives them a disguise as vegetation or interior items. The most popular materials for decorative finishes are artificial flowers, twine, cord, rope, ribbons, fabric, buttons and pebbles. It is very convenient to use bamboo. Simply find a trunk of suitable diameter. There are plenty of decor options, you can use any improvised materials suitable for the style of the room. Some of them are shown in the photo.

This way of hiding pipes gives unlimited scope for creativity. Looks good riser wrapped in hemp rope. With a little imagination, you can easily turn it into a tree trunk or branch. Often there is a disguise as a birch. From horizontal pipes, convenient supports are obtained for hanging decorative objects, curtains or shelves.

Coloring and applying patterns

All the above methods of masking heating pipes to one degree or another reduce the flow of heat into the room. One of the best options for hiding heating pipes in an apartment in order to preserve their heat dissipation is painting and applying various patterns. Good results are given both by art painting and decoupage coated with heat-resistant varnish.

Provided that you do it yourself, this method is the cheapest, since the metal elements of the heating system still need to be painted, and the paint consumption for patterns is negligible. In the case of decoupage with napkins, the costs are generally minimal. At the same time, pipes and radiators turn from ugly objects that you want to hide into interior decoration.

Important!  The paint must be applied to the cold circuit when the heating system is turned off, otherwise it can crack if it dries quickly, or it simply lies in an uneven layer with spots and stripes.

In order to give the elements of the heating system a decorative look, painting is sometimes applied even of plastic pipelines and heating devices already covered with a protective layer. A well-chosen color scheme can make pipes and radiators the main highlight of the interior, and can help to harmoniously fit them into the environment and make them invisible.

When choosing a paint it is necessary to pay attention to such parameters as color gamut, resistance to fading over time, gloss, ability to withstand high temperatures, good adhesion to the appropriate base. Environmental friendliness and smell are also important, since when painting, you will have to breathe in pairs of paints for a rather long time.

Tip:  In no case should you save on the price of paints or brushes. Indeed, bold design solutions for successful implementation require the use of the highest quality materials.

The easiest way to hide heating pipes is to paint them to match the walls. Nevertheless, the time spent on art painting always pays off subsequently with aesthetic pleasure from contemplating the resulting paintings.

An ordinary radiator can become a canvas for the artist. With the help of brushes and paints, skillful hands are able to turn the heater into a real work of art.

Conclusion

Modern pipelines have a long service life and allow hidden installation. However, in some cases, the elements of the heating system are open and decorated. There are many ways to mask pipes, the choice of the most suitable depends on the characteristics of the premises and the aesthetic taste of the owners.

In the presence of creativity and willingness to allocate time, decorating heating pipes in a room can be done with your own hands. This will decorate the interior with minimal cost.

Pipelines are in every apartment. The modern interior involves the design of the premises with taste so that everything is neat and stylish. Therefore, the question of how to close the heating pipes worries many owners. Today, there are a number of ways by which you can solve the problem of an unaesthetic appearance of heating structures. The article will consider the most effective of them.

A large selection of heating systems is available on the market. In order to determine which pipes to use for heating a private house or apartment, one must consider the physical properties of the product, operational characteristics, installation and application conditions. There are pipes that look aesthetically pleasing and do not spoil the interior of the room, but differ in low quality and low technical parameters. And there are reliable and durable options, but not particularly attractive in appearance. To create a stylish design, such pipes have to be hidden.

Deciding how to hide the heating pipes in a private house is best at the construction stage. Then you can think through everything well and equip the system so that the highways are not visible at all. Of course, there are options that can be applied after the end of the construction of the house and repair work. But still, it is better to pay attention to this issue directly at the stage of designing the structure.

The most commonly used options, how to hide heating pipes in an apartment, in the private sector, are:

• closing of the laid highways with decorative screens;
• camouflage pipes using false walls from GKL or ducts;
• hiding under the raised floor;
• installation of a heating system behind a suspended ceiling;
• walled risers in the wall;
• use of decor elements.

Pros and cons of concealing heating pipes

In order to answer the question, what is the best way to close the heating pipes, you need to know that each of the options has positive and negative sides. It is necessary to choose one of the methods not only on the basis of decorative qualities, but also taking into account the technical characteristics of highways, laying conditions and other local factors. It is worthwhile to elaborate on each of the options.

Decorative screens

Suitable for all kinds of pipes. A quite affordable way to hide the pipeline. If the risers are made of metal and lag behind the wall at a great distance, then installing screens is the best option for closing heating pipes in a private house or apartment. The choice of decorative screens is wide and presented in different shapes and colors. You can read more about battery grilles. The advantages of this method include: quick and easy installation, the heat transfer of the riser is not disturbed.

Drywall and Laminate Structures

Decorative box for hiding the pipeline can be made of laminate, drywall, polyvinyl chloride, MDF. Sometimes used and parquet boards on a rack frame. Such an option as closing the heating pipes in the room with drywall is the most popular. Using this material makes it possible to create designs of any configuration. Decorating a drywall construction is very simple: you can paste the wallpaper or paint to match the walls of the room. Can also be tiled.

Many people choose such a method as to hide heating pipes in a new building with a laminate, constructing a duct from it. At the same time, the design turns out to be decorated like the floor. If in addition to the heating pipes in the house there are other communications, it is best to hide them with the help of a false wall from GKL.

The considered method has several disadvantages, for example:

But, formed as a result of the erection of false walls, the niche can be used to advantage. For example, laying a layer of insulation, you can improve the light and sound insulation. You can use such a place for a nightlight or place a stereo system. Using a niche with benefit, the equipment of false walls will be a completely justifiable option for hiding pipes for heating.

Hiding highways in the wall, floor

Such a method as hiding heating pipes in a floor screed or in a wall is not suitable for all highways.

For example, you can not use this method for pipelines made of black steel, plastic with compression fittings made of polypropylene. But for stainless steel lines and copper pipes, cross-linked polyethylene and metal-plastic on press joints, the option would be ideal. But you must first think carefully about all the intricacies of the layout of the wiring.

There are heating pipes in the wall of the pros and cons that you need to know before choosing this method of masking the mains. The main advantage of the method is that the design of the room will not be disturbed and overloaded with additional details. True, there are also disadvantages. For example, the complexity of installation. If the pipe leaks, you will have to destroy the wall for repairs.

Hiding pipes in the ceiling

Very often highways are located in the upper zone of the room and closed with false ceilings. For a private home - this is a very practical option.  But also quite expensive. It is important that the joints are of high quality and reliable. Otherwise, if the pipe breaks, water can flood electrical appliances and residents of the house. Before you hide the pipes behind the wall, in the floor or under the ceiling, you need to think carefully. To strengthen the thread used to use tow or flax.

Today, new, more effective materials have appeared. For example, winding for sanitary pipes. This is a great way to seal pipes with hot or cold water. It should also be remembered that when heating or cooling the pipeline, its length may vary slightly. To reduce fluctuations in the length of the trunk, use special devices - compensators for heating pipes at home. They compensate for changes in length, which allows to increase the life of heating structures.

Applying Decor Elements

Decorative sockets for heating pipes are an excellent option for hiding pipes.

The method is simple. The gap between the floor and the pipe is filled with an elastic sealant that can withstand high temperatures. And then draw up a decorative outlet. Such elements are made of wood or plastic. Plastic sockets have a wide variety of colors. Wooden ones can be painted in any color, varnished or stained.

Thus, there are many ways to hide heating pipes in a private house. It is advisable to close the highway at the stage of construction. But even after construction, you can decorate the pipes. Each of the methods has its advantages and disadvantages. And which one to give preference to depends on the type of pipeline, operating conditions and the chosen design of the room.

You must admit that even the most original design decision for interior decoration of a bathroom can come to naught due to unsightly engineering communications. You can save the situation by skillfully masking unpresentable elements.

Moreover, it is not necessary to be a virtuoso in the business of construction - it is enough to choose finishing and building materials, prepare tools and stock up on free time.

We will show you how to hide pipes in the bathroom, while providing access to maintain the system. Having studied our instructions, you can independently transform the bathroom, saving money on the services of plumbers.

The first thing to do before proceeding to seal pipes in the bathroom is to decide on the suitable material.

Guided by the choice of material for hiding pipes in the bathroom exclusively aesthetic component of products is not entirely correct

Criteria to be guided by when choosing a material:

• Light weight. So that the structure does not clutter up the already limited space, it is necessary to select materials for the fixation of which there is no need to build heavy frames. You can use ordinary wooden battens or metal profiles.
• Moisture resistance. High humidity for the bathroom is a common occurrence. The materials used in its arrangement will certainly be affected by it. Therefore, preference should be given to those options that do not absorb moisture and do not deform when it settles on the surface.
• Sustainability  to the effects of chemicals. Without the use of household "chemicals" to maintain cleanliness in the bathroom is quite problematic. During general cleaning, all vertical and horizontal surfaces are subject to processing. And therefore, the materials used for their lining should be able to transfer direct contact with household cleaners without serious consequences.

To hide communications in the bathroom, decorative MDF boards, wall panels made of plastic, sheets of moisture-proof drywall are excellent.

In the cladding of wall structures, decorative hardboard plates covered with a layer of melamine laminate and gypsum 3D panels will look interesting

A variety of textures of gypsum 3D panels popular in recent years are able to imitate wood, brick, mosaic and create fancy patterns on the walls.

An important point: regardless of the type of facing material, before closing the pipes, it is worth making sure of their reliability. Closing a pipeline that has defects, there is a great risk that in the near future it will be necessary to disassemble the structure in an emergency.

Possible masking methods

There are many options that suggest how to hide pipes in the bathroom. They differ in the form and purpose of the constructed structure, as well as the types of materials used. We suggest considering the most popular among them.

Image Gallery

The steps for masking communications during the installation of a hanging toilet in a mixed bathroom will be presented by the following selection of photos:

Image Gallery

If desired, the box can even be brought to the level of the sink. Such a solution will provide an opportunity not only to hide all unsightly communications, but also to provide additional space for storing bottles with household chemicals.

To cover the inspection hatch it is convenient to use ready-made plastic doors, which are on sale in a wide color and size range

Arrangement of the inspection hatch is a prerequisite if the decorated part of the pipeline is equipped with valves, counters, or any other equipment elements.

Masking pipes with tiles and mosaics looks appropriate in bathrooms, especially if made of the same material.

Method # 3. Closure with plastic panels

Decorative panels made of plastic are an easy-to-use and at the same time inexpensive option to hide communications. Presented on the construction market a wide variety of types, colors and designs allows you to create a design that will harmoniously complement the already equipped interior.

Structures made of plastic panels are also convenient in the sense that all their elements are interchangeable - this greatly simplifies the task if it is necessary to partially disassemble the structure

The only drawback of plastic panels is their low fire resistance. Although many manufacturers guarantee self-extinguishing of products, they are no less afraid of smoke than open fire. Therefore, in the bathroom, the pipes of which are decorated with plastic panels, you need to beware not only of fire, but also of regular smoking.

Installation of plastic panels is carried out on a pre-assembled frame, the basis for the manufacture of which are all the same metal profiles. Before sheathe the frame, first start molding is attached to it with screws.

Often in the construction of the frame for attaching plastic panels, they prefer to use lumber. They are easier to cut and process than a metal profile:

Image Gallery