DIY homemade from improvised. Interesting and useful homemade products for the home

Making electronic homemade products with your own hands gained popularity in the last century, when semiconductor devices appeared. With their help, it was quite easy to assemble the devices necessary for everyday life from old equipment. Today, the repair and collection of equipment for a home or a summer residence, for a car or a garage can also be solved at home.

[ Hide ]

Homemade devices for home and garden

Electric homemade products for home and summer cottages, using the power of electricity, can be done by every electrician. Most fixtures are built from factory components and require only school knowledge of electricity.

Electric barbecue

The electric grill can be either horizontal or vertical. Stores usually sell vertical ones, and they do their job perfectly after some refinement.

To create a horizontal barbecue, you will need a heating element and a frame resembling a brazier. You can make a heating element from a ceramic tube and a nichrome spiral wound around it. The tube is fixed through an insulating material in a metal housing. Drawings are required to assemble the case.

Barbecue grill

An equally interesting idea is a barbecue grill with an electric drive for rotating skewers. By adding an electric motor to a regular brazier, you can get an excellent device that will cook barbecue offline. To organize a skewer drive, you can use a motor from the wipers, from a washing machine or any other 12 volt motor. With the help of a system of pulleys and a belt or gear drive, the rotation of the shaft is transmitted to the skewers, and the meat slowly turns over the coals.

Homemade WI-FI antenna

Such an antenna will improve the reception quality and speed of Wi-Fi in your home. According to reviews, after connecting it, the signal level rises from 5 to 27 Mbps.

For manufacturing you need:

• a small metal sieve or colander;
• Wi-Fi adapter (USB);
• USB cable;
• drill;
• epoxy resin;
• camera tripod;
• plastic clamps.

Manufacturing process:

1. We drill a small hole (14 mm) in the center of the sieve and insert a metal pin into it to fix the adapter.
2. We insert the connector from the USB cable into the prepared hole and fix it with epoxy. The USB connector after gluing must be strictly perpendicular to the plane of the sieve, then the device works more efficiently.
3. Then, with the help of two ties, “ears” are made through which the cable is attached.
4. We fix the product on a camera tripod. We drill a hole with a diameter of 12 mm in the antenna and clamp it with a nut.

Necessary materials Insert the pin into the drilled hole Attaching the USB cable We fix the cable Tripod Mounting the antenna with a tripod

Electric homemade for the garage

Consider several projects of useful homemade products for the garage.

homemade chandelier

If you have low lighting in the garage, then an impromptu chandelier will be very useful. To make a bifurcated cartridge, you will need a pair of angle cartridges, which are sold in a regular hardware store.

Sequencing:

1. We remove the wires from the cartridges and fasten them with a plastic tie. We get a cartridge for two lamps. It remains to connect them to the electrical network.
2. To do this, we use the base of a fluorescent lamp. We carefully break out the lamp, then solder the wires from our design to the contacts of the base.
3. We isolate them well and attach the base on top of the cartridges.

The use of conventional light bulbs in such a design is undesirable - the cartridges can fuse from heating.

LED device

Another lighting option can be a homemade LED lighting device.

For its manufacture you will need:

• old fluorescent lamp;
• LED Strip Light;
• connecting wires.

The manufacturing sequence is as follows:

1. An LED strip is glued onto the lamp body in one or several rows.
2. The connecting wires are connected and brought to the lamp switch.
3. The assembled device is tested.

Spot welding machine

The necessary device in the garage will be a home-made spot welding machine, the basis of which is a transformer from an old microwave oven. A necessary condition is that the transformer must be working in order not to rewind all the windings.

The assembly process of the welder is quite simple:

1. The transformer is dismantled.
2. Carefully remove the secondary winding.
3. Two shunts are removed.
4. From a thick wire (with a diameter of at least 10 mm), a secondary winding of two or three turns is made.
5. From a copper bar with a diameter larger than the wires, electrodes for contact welding are made.

Homemade spot welding tool

Useful DIY things for fishing

Among homemade products, you can find many interesting ideas for use in field conditions, as well as hunting and fishing.

Electronic signaling device

An example is an electronic signaling device for fishing with a conventional fishing rod or other tackle. A simple bite device can be assembled in just half an hour. For it, you will need an old tweeter keychain and a strip of plastic 1-2 mm thick.

Assembly of the signaling device:

1. The keychain is attached to the rod.
2. A strip of plastic is glued to the fishing line and inserted between the contacts of the key fob.

Now, when biting, the fish will pull the line, the plastic will fly out, the contacts will close and the key fob will work.

Underwater camera for ice fishing

With the help of a homemade underwater camera for ice fishing, you can see if there are fish under the hole. This makes the fishing process easier.

For manufacturing you will need:

• small chamber;
• sealed box for the camera;
• small TV;
• car battery to power the camera;
• extension;
• inverter;
• lead for cargo;
• ultraviolet diodes for illumination at underwater shootings;
• superglue, electrical tape, sealant.

Assembly process:

1. Two holes are made at the top of the box. An extension cable is inserted through one. Through the second - the wire with which the camera is connected to the TV.
2. In the box, several more holes are made into which light bulbs are inserted for illumination. The wires from the light bulbs are soldered into one circuit (for example, with a parallel arrangement), which is connected to a cable that provides power.
3. Holes are sealed with glue and electrical tape for tight sealing.
4. Lead is melted and small elongated bars are poured out of it. They are placed at the bottom of the box.
5. Set up the camera, connect to the cable. After that, it is carefully placed in the box so that it has a clear direction forward and horizontally and transmits a high-quality image. For stability, the camera is surrounded by a soft material.
6. A torso (rope, belt) is attached to the box, with which the camera will be lowered to a depth. For convenience, you can combine it, the power cable and the cable for connecting the video camera to the TV into one core, fastening it with electrical tape.
7. Connect the camcorder's power cable to the battery and test the unit.

Homemade fish bait

You can make a good bait for catching fish yourself. This will be a device assembled on the basis of a simple multivibrator.

You will need:

• a sound emitter, for example, from a children's toy;
• wires;
• a small plastic jar, for example, from under medicinal tablets;
• electronic board;
• regulator with plastic rod;
• a piece of foam;
• batteries;
• float weights;
• volume control.

The assembly of the bait is carried out as follows:

1. You need to solder the circuit and check it.
2. Two wires are soldered to the sound emitter. Then they are held inside the case and connected to the board.
3. A regulator with a plastic rod is placed in the lid of the jar.
4. A dense circle cut out of foam is installed on top of the board, which separates the board from the battery.
5. Weights are fixed at the bottom of the jar so that the container is kept on the water like a float.
6. The regulator sets the frequency and changes the sound.

Lure scheme - 1 Lure scheme - 2

Electronic homemade products for a car

Motorists create homemade products with their own hands to improve the appearance and ease of use of the car.

Electric autoprobe

For a car, a simple homemade electrical probe is perfect. It can show the presence of a voltage of 12 volts in an electrical circuit. With it, the health of the relay, as well as light bulbs and other equipment, is checked. You can make such a device from a syringe and LEDs.

Assembly diagram:

1. Two LEDs are soldered with opposite terminals (plus one to minus the other and vice versa).
2. A steel probe is attached to one of the solder joints through a resistance of 300 ohms. To the other soldering is a contact for batteries.
3. The design is inserted into the syringe so that the probe comes out of the needle hole. Most of the probe is insulated with a PVC tube.
4. 4 LR44 batteries are inserted into the syringe so that one of the poles is connected to the LED contact.
5. A contact is made to the other pole of the batteries from a flexible wire with an alligator clip.

The video shows how to make a syringe tester. Filmed by ILYANOV channel.

Light switch

It is quite simple to manufacture a circuit for smoothly turning off the light in the car. Such electronics is suitable for any car. Parallel to the terminals of the cabin lamp, a small board is soldered, consisting of a capacitor and diodes. The drop in electricity voltage will occur gradually and will create the effect of a smoothly fading light.

car subwoofer

To make a car subwoofer with your own hands, you must first purchase a speaker. Its dimensions must be taken into account when calculating the size of the case.

The simplest and most successful form of a subwoofer for the trunk is a truncated pyramid with a slope like that of the rear seats.

LED fog lights

With your own hands, you can make car fog lights on LEDs.

For creativity you will need:

• two ten-watt LEDs;
• 2 lenses from an old projector;
• gaskets from plastic pipes;
• LM317T chips;
• resistors.

Instructions for assembling crafts:

1. LEDs are installed on pre-prepared aluminum radiators.
2. A structure is assembled from headlight housings, lenses from projectors, gaskets and diodes on radiators.
3. Fog lights are powered through current stabilizers on LM317T microcircuits and resistors.

Car carrier

A very convenient car carrying is obtained from a computer USB lamp. It is compact and you can connect the device to any place in the vehicle wiring.

Manufacturing scheme:

1. We remove the contacts from the USB plug.
2. In the plug housing, we connect the wires of the lamp and car crocodile clips.
3. For fastening in the right place (even horizontally), a magnet is placed on the plug.

As they say, in the garage there is not much space. Men who spend a lot of time in the garage will agree that in some cases every minute and every square centimeter of free space counts. That is why the garage master needs a competent organization of the workspace. Here in every possible way help out and help various devices for storage of building materials, work equipment, machine parts and other things necessary for work. To keep your electronic, garden and garage gadgets always in their places, use the following tools:

• • stands;
  • shelves;
  • sliding panels;
  • racks;
  • tool organizers.

Also, for clarity, we offer homemade products for the garage and do-it-yourself home craftsman - YouTube video will reveal all the nuances of organizing the workspace and suggest fresh ideas.

DIY homemade products at home

Man has been engaged in homemade crafts since prehistoric times. Actually, all industrial processes are improved once handicraft or home developments of craftsmen. We sometimes do not even think that we pay for those things that we can do with our own hands. homemade schemes easy to find online, and materials can be bought at a hardware store or found at home.

For instance, from a cardboard box and a piece of cloth you can make a convenient portable organizer for towels and other textiles.
The topic of storing all sorts of little things is inexhaustible, fortunately, as is the number of ideas. Good decor ideas you can also draw from ordinary things - let it be buttons or empty tin cans.
Cool shelves are obtained from ordinary boxes. How do you like this idea?

As you managed to understand, with detailed instructions, it is not so difficult to make homemade products with your own hands at home. The video will help you comprehend all the nuances of this pleasant activity. Useful tips, interesting ideas - a must-see for everyone.

Do-it-yourself homemade products for summer cottages and gardens

In the country, there is usually some free time for creativity and arranging the surrounding space. So it's worth having a few fresh ideas on hand to implement them in your own summer cottage. Do-it-yourself country homemade products at home can be even ingeniously simple. From improvised materials, you can make unexpected and extremely useful household items.

Ordinary pebbles turn into fabulous animals.From an old teapot makes a beautiful flower pot.

Used tires- it has already become a classic in the world of garden figures. Stylish lamps for a country interior - do it yourself from a regular jar and candles (do not forget about safety).
- a chic idea for a small cottage.
Do-it-yourself homemade products for summer cottages and gardens often turn out by themselves, without unnecessary time and financial costs. Perhaps you had no idea how useful for the household will be plastic bottles. Plastic bottles that have gone out of use can serve as the basis for an incredible decorative flower bed. Cool "blooming" pillars greatly decorate your summer cottage.

DIY garden furniture successful homemade: photos and drawings

In the previous sections, we told you about homemade products that will become indispensable for the economy and household. However, do not forget about the rest, before which, nevertheless, you will have to work a little. Cozy armchairs, various tables and benches, swings and hammocks- all this country-garden bliss can settle on your site. We suggest that you familiarize yourself with the photo instructions and drawings for the manufacture of garden furniture. We have selected the best options for you.

Since you have decided to become a self-taught electrician, then for sure after a short period of time you will want to make some useful electrical appliance for your home, car or cottage with your own hands. At the same time, homemade products can be useful not only in everyday life, but also made for sale, for example,. In fact, the process of assembling simple devices at home is not difficult. You just need to be able to read diagrams and use a tool for radio amateurs.

As for the first point, before you start making electronic homemade products with your own hands, you need to learn how to read wiring diagrams. In this case, ours will be a good helper.

Of the tools for beginner electricians, you will need a soldering iron, a set of screwdrivers, pliers and a multimeter. To assemble some popular electrical appliances, you may even need a welding machine, but this is a rare case. By the way, in this section of the site we even talked about the same welding machine.

Special attention should be paid to improvised materials, from which every novice electrician will be able to make elementary electronic homemade products with his own hands. Most often, in the manufacture of simple and useful electrical appliances, old domestic parts are used: transformers, amplifiers, wires, etc. In most cases, it is enough for beginner radio amateurs and electricians to look for all the necessary tools in a garage or a barn in the country.

When everything is ready - the tools are assembled, spare parts are found and minimal knowledge is obtained, you can proceed to the assembly of amateur electronic homemade products at home. This is where our little guide will help you. Each instruction provided includes not only a detailed description of each of the stages of creating electrical appliances, but is also accompanied by photo examples, diagrams, as well as video tutorials that clearly show the entire manufacturing process. If you do not understand some point, you can clarify it under the entry in the comments. Our experts will try to advise you in a timely manner!

But also to engage in the implementation of various unique ideas. Homemade products for summer cottages will give a second life to things that have become unnecessary in the city, make the site cozier and more attractive, and also help save the family budget.

Do not rush to throw away old things

Dacha is a place where obsolete, but still strong things are brought. Often there are sofas, chairs, unfashionable wardrobes, clothes, dishes and many other household items. We just throw a lot of things in the trash cans. Plastic, the remains of decorative and finishing materials after repairs in the apartment get there. But from these unnecessary things you can make various practical home-made products for summer cottages and gardens.

Let's try not to throw it away, but to take everything to the country, so that later we can do unusual creativity. Plastic bottles can be used to make a beautiful resting place for kids, an unusual figure in the garden, or make a gutter for draining rainwater into a tank. Craftsmen from plastic bottle caps make fences of extraordinary beauty that can stand for decades, remaining strong and attractive.

It is easy to make a pair, a small pond or a comfortable ottoman from old car tires. If you rip a few pairs of old jeans and sew them into a rectangular canvas and add a few more elements, you get a durable hammock for relaxing in the garden. There are many ideas, but the most important thing is the ability to save money on the purchase of the right things and get an original decor element almost for free.

We will share a few simple but practical ideas and bring to your attention a video about homemade products for summer cottages that are not described in the article.

We decorate the cottage with homemade products

A pair of swans. For work, you will need two old car ramps. The most difficult process is cutting according to the pattern. It is best to work with a solid saw. It is necessary to make two parallel cuts on half of the slope. Cut the tape so that one piece is a corner, and the second has two cloves. Bend the strips in different directions. For the beak, use red paint. Paint the bodies black and white. An amazing pair of swans is ready. It remains to install them on the site.

Uninhabited island. Children love to play in the sandbox, and plastic bottles will help decorate it in the country. For work it is necessary to prepare:

• brown and green bottles;
• metal rods;
• silicone glue;
• wire;
• some cement mortar.

The length of the rods is chosen from your own preferences. Dig a small hole near the sandbox or in the middle and install 2 or 3 hard rods of different heights. Surround the structure with small stone and pour cement mortar. Cut off the bottom of brown bottles. If the rod is too thick, cut off the neck to the desired diameter. Put the bottles upside down until you get the trunk of the future palm tree. For strength, you can glue the bottles together.

Make the top of the tree out of green bottles. For one palm tree, you will need six pieces of strong, hard wire. Cut off the bottom of green bottles and cut into strips, without cutting 2 cm to the neck. Put the bottles on the wire to make a lush palm branch. Attach to the main stem. A beautiful do-it-yourself homemade product for a summer residence is ready and now the kids have their own desert island.

Decorative finishing of a summer residence. Nothing is impossible for a Russian person. An original decoration for a country house can be made from plastic covers. Collecting so many individual elements of different colors is not at all easy, but with the help of neighbors and friends it is quite possible.

Important! All covers must be free of writing and dirt.

The fastening of the covers is done depending on the surface of the walls. Covers can be fastened to wooden walls with thin nails. Nice way to stick with glue. Some craftsmen use thin wire. For such fastening, 4 holes are made on the side of the cover in such a way that two wires are pulled perpendicularly through them. When the laid out pattern gets tired, the grid is disassembled and another picture is laid out.

Practical homemade products for summer cottages and gardens

In addition to unnecessary things, you can make quite practical and necessary items in the household.

Convenient padded stool from an old automobile ramp. To work, you will need two more pieces of plywood, old thick things or a thick rope. Plywood needs to be cut 4 cm less than the outer diameter of the slope. Use self-tapping screws to attach one circle on top and the other on the bottom. If you are going to make a fabric cover, cut a piece of foam rubber the same diameter as the plywood. Old things need to be torn apart and washed individual parts. Sew from them a cover for an ottoman. The ottoman can be made of thick rope. To do this, the rope is glued to the slope in a circle until the surface is completely closed.

Plastic bottles on the beds. There is no time to visit the country often, but I really want to grow my own vegetables. There is one simple way out - to use large plastic bottles on the beds. For this, 5 liter bottles are best suited. Stepping back from the bottom, drill a centimeter in two rows through 2-3 cm holes. Dig one bottle between four bushes of vegetables so that the holes are at the level of the root system of the plants. Fill the bowl with water and close the lid. While you are in the city, your vegetables are fed with moisture from bottles. A photo of homemade products for a summer residence will help you bring the simplest ideas to life.

For lovers of neat, even beds, plastic or glass bottles will come in handy as a decorative small fence. Bottles dug upside down will give your yard some organization. A bed fenced for a separate type of vegetable is easier to fertilize and weed. smooth and easy to clean from weeds, without fear of damaging the roots of plants. Plastic bottles connected to each other in a pipe can be used as a gutter for collecting rainwater from the roof.

From the remains of an old tree cut across, you will get a beautiful path in the garden. An original garden path can be made from cobblestone collected on the river bank.

Some craftsmen make small greenhouses from plastic transparent bottles for growing the first green onions and radishes. Bottles of the same shape and size are cut into plates. After that, they are soldered together with glue. Light transparent sheets are obtained, which are attached to the prepared frame.

Homemade products for home and garden can be very different. The main thing is to give free rein to your imagination and try to bring it to life.

A selection of photos of country homemade products:

Someone will certainly take a look at this collection of ideas and say that it is easier to buy new furniture or decor. But this article is not for them, but only for true connoisseurs of the unique style and handicrafts. Here you will find the 10 most beautiful interior items that you can do for your home without spending extra money.

The best crafts for the home with your own hands from improvised materials for 2018!

1. Decoupage and other do-it-yourself furniture repair ideas

Restoration of old chests of drawers and sideboards is perhaps one of the main trends of our time. Many pieces of furniture fail over time: tables and chairs loosen their bodies, upholstered furniture is pressed through and requires a new “stuffing”. But chests of drawers and sideboards can stand for themselves for many years and annoy you with their outdated appearance.

Home needleworkers and decoupage masters have not only found a way to update the design of old furniture, but have also created a fashion for the use of vintage “grandmother's” chests of drawers in the interior. You will find detailed instructions for painting and decoupage in our article. .

Below are some photos of amazing home projects to inspire you.

Restoration of an old chest of drawers with replacement handles and hand painting:
Painting and finishing an old cabinet with metal buttons:
As a result, the furniture acquired an original Moroccan-style decor effect. Simple, like all ingenious:

By the way, in this way you can create more sophisticated things for the home:

Decoupage and painting amazingly transform old furniture facades, but not every person has enough time and patience for this painstaking task. Therefore, the best DIY home ideas also include refurbishing furniture with duct tape in marble, gold, and other unusual finishes. A minimum of effort - and the most ordinary piece of furniture will turn into the main decoration of your interior.

2. Beautiful things for the home with your own hands: carpets

Perhaps the most pleasant thing about creating things for the home with your own hands is when one of the guests asks: where did you get such beauty? A stylish rug with a zebra print (or other motif of your choice) will certainly deserve such a compliment. And not once.

The fabric can be any. The main thing is that it should not be too demanding in care: it is not afraid of moisture and is easy to clean. In this case, the master chose the vinyl fabric. It is heavy and strong enough to look like a true carpet. What's more, the quality of vinyl these days is very impressive, and it's available in a wide variety of colors and interesting textures.

All necessary materials and tools:

• Thick paper;
• Vinyl upholstery;
• Scissors;
• 2 Krylon pens or regular fabric paint.

Procedure:

1. Create a paper stencil. Draw and cut out the outline of the zebra skin, then the drawing itself on it. Do not worry about your artistic talent - the skin of a zebra and should not look uniform or symmetrical. In extreme cases, the pattern can be copied from a picture on the Internet or even printed out to cut out.
2. Attach the stencil to the vinyl fabric and outline the stripes with Krylon pens (spray or brush). After that, the stencil can be removed and continue to paint the areas inside the contours.
3. Let the paint dry and you're done! To be sure the pattern will hold, you can "seal" the carpet by spraying a clear coat of acrylic spray paint over it.

Krylon handles create a stunning gold leaf effect on the surface of the fabric. In addition, the paint in them dries quickly and is very securely held. If you can’t buy them in your city, then use regular fabric or wall paint. As the next hero of our article.

He took a cheap white rug as a basis and decided to give it an interesting look with his own hands using a chevron pattern. All he needed was thin duct tape, scissors, a thick brush, and two different shades of latex paint.

Finally, another inspiring example where a makeshift stamp is used instead of a stencil. The craftsman had a rubber bath mat, leftover wall paint (which had been slightly thinned with water for a vintage effect), a roller and an old IKEA wool rug. We look at the photo that he managed to cook from these ingredients.

3. Unusual "marble" DIY crafts (photo)

7. Turn photos into wall decor

This is much cooler than just hanging photos in frames! Your personal photos or any images you like from the internet can turn into beautiful wall art for any room. To make such a decor with your own hands, you can use any of the following methods.

1. Find or buy a substrate. A thick sheet of polystyrene foam or polystyrene foam (as in this case), a board and other improvised materials can act as it.
2. Print the photo, having previously edited its dimensions so that they are about 5 cm larger than the substrate. These "extra" centimeters will go to the folds.
3. Cut the photo and backing into pieces if you want a modular set rather than the whole picture. Otherwise, skip this item.
4. Overlay the photo on the substrate and wrap the ends. The author of this product used double-sided adhesive tape to secure the photos. You can mount with ordinary glue or other available means. The very surface of the photographs can also be treated with glue or gloss paste.

1. Print the image and prepare the canvas to which it will be transferred.
2. Pull the canvas over the frame and apply a thick layer of medium gel on it. These gels are widely available and today you can buy them in any store of finishing materials.
3. Place the photo on the oiled canvas and press down. Leave it like this for several hours, but periodically sprinkle with water from a spray bottle.
4. Carefully, use your fingertips to start erasing the back of the image from the canvas. Remove all paper in this way.

As a result, you will get a beautiful one with scuffs that will only give it a touch of vintage style. It remains only to apply the last layer of medium gel on it as a protective coating.

For inspiration, here are a couple more ways to decorate your interior with a photo.

We use an old window frame as a photo frame. How do you like the idea?

8. Creative homemade lampshades for lamps

Homemade lampshades made of fabric, paper, thread and other improvised means will not only decorate your home, but also bring an unusual atmosphere into it every dark time of the day.

Look for the best ideas for your taste in our article . The next photo shows a popular creative thread lampshade.

9. Succulents - do-it-yourself living home decor

A succulent living wall is perhaps the most amazing DIY craft you can make for your home. Agree: if you saw it in someone's design of a living room or another room, you would not be able to remain indifferent!

Dekorin will tell you how to get such an impressive and sustainable decor:

1. You will need a shallow wooden container for planting and a metal mesh.
2. To fix the mesh on the container, use an impromptu wooden frame, which can be made from small boards or chips. Attach to staples or nails.
3. Prepare any for composition. They easily take root in the most difficult conditions and look best when you combine different shades and shapes of leaves. Common examples of succulents: aloe, various cacti, young or stone rose (Sempervivum), stonecrop (Sedum), mountain grate (Orostachys), etc.
4. Fill the container with soil and plant your chosen plants in it. Use any cactus mix for drainage.

Here are examples of crafts for the home that you can do with your own hands using the above method.

10. Crafts for the house with your own hands from glass containers

Glass bottles and jars often accumulate on balconies and in pantries. What they just don’t turn into today: lamps, candlesticks, vases, table decor ... It’s amazing how easily they become part of a stylish interior, you just need to use a little ingenuity, as well as paints, fabrics, threads, paper and other improvised means. Last batch of photos for today. Also read:

10 best DIY ideas for your home updated: March 21, 2018 by: Margarita Glushko