Manufacture and installation of cabinet doors. We make doors for the sliding wardrobe ourselves

Front part of the wardrobe has not only a practical function, but also a decorative one, decorating the interior of the room, and with the right choice - even visually expanding it. A full right of choice is offered by our catalog, which widely presents the most common materials for sliding wardrobe doors.

Chipboard

Chipboard doors have an incomparable advantage over other options - they will cost the least. But price is not their only advantage. The advantages of this material also include:

• ease;
• strength;
• moisture resistance;
• attractive appearance;
• large selection of patterns and colors.

They don't fade or crack. They will look appropriate in rooms with a minimalist design, but will not fit an expensive interior.

lakobel

This material is glass, painted on one side in a rich opaque color. The facade made of lacobel is distinguished by saturation and uniformity of color, resistance to moisture and unlimited service life. Many customers opt for it because of its brightness and reliability.

Glass

Glass doors will visually expand the space, so this is the best solution for a closet that will stand in a small room. The cost of the material is also low, so glass usually competes with chipboard when choosing a budget option for the facade. However, glass has one feature that should not be forgotten - it is fragility. This point should be considered if there are children in the house.

Photo printing

Photo printing allows you to apply all kinds of drawings on the cabinet doors - from landscapes to a photograph of a person. Photo printing is applied on a glass base, that is, in fact, these are the same glass doors, only in this case the facade will not have a mirror, but a naturalistic drawing.

sandblast drawings

They are applied to glass, at least 4 mm thick, thus forming a rough surface. For application, sand is used, which is applied by a jet using a special technology using a stencil in a special chamber.

Closet doors are an important part of sliding furniture. They form an aesthetic facade, decorate the room and prevent dust from entering the interior of the cabinet.

A wide range of materials are used to fill the door. Often, chipboard, MDF, glass, mirror are used for this purpose. There are also rare and exotic finishing materials - bamboo, rattan, solid wood and so on.

The assembly technology and the arrangement of sliding doors make them a universal attribute of a house or apartment. They can serve as part of the facade of a cabinet or an interior partition. At the same time, in each individual case, the design should be as practical as possible. To do this, there are a number of sliding door systems. They differ in appearance, type of profile, method of attachment, the presence of a threshold, and so on.

Door design for wardrobes

Various materials are used to fill wardrobe doors. The most popular belongs to chipboard and MDF. With the help of fiberboards and panels, real masterpieces of design are created.

Sliding wardrobe "Armadio"

Sliding wardrobe "Shine"

Sliding wardrobe Lady

Photos of wardrobes are presented in our photo gallery.

We offer you to get acquainted with a number of ready-made solutions for the design of wardrobes. The photo gallery presents sliding wardrobes, which differ in:

• number of doors (two or more);
• purpose (nursery, bedroom, living room, hallway);
• the presence of elements of glass and mirrors;
• color scheme of the facade and profile;
• style (classic or modern style);
• internal filling;
• type of building (built-in, cabinet cabinet);
• the presence of open shelves;
• decor (photo printing, sandblasting, etc.).

Examples of modern design will help you decide on the appearance of furniture and get new design ideas.

A developed network of official representatives allows you to buy a profile and filling for sliding doors at wholesale prices. And many of the companies allow you to place an online order with delivery.

3D wardrobe - convenient visualization of future furniture

The program is a convenient free application that can be downloaded to a PC or laptop in the appropriate section.

Advantages of calculating the door system using a calculator:

• the program does not require an Internet connection;
• no special skills required;
• a branded calculator contains all the colors and types of profiles available on the website;
• The program is updated when new systems appear in the assortment.

To use the program, just click the "Download" button and follow the instructions.

Video instructions for assembly and installation

To easily and without difficulty install sliding furniture or a partition, just watch the video on assembling wardrobe doors. Depending on the type of system (top-hung, bottom-support, non-threshold), doors can be installed:

• directly to the closet;
• in the doorway.

Calculation of the size of the doors of the sliding wardrobe systems "Ramir" and "Universal"

Assembly and installation of wardrobe doors of the Puerta system

Even more videos on step-by-step assembly and installation of various door systems are presented in the corresponding section.

For each individual case, there is a specific video with instructions.

Before installing the system, it is extremely important to calculate the correct position of the doors. In the videos you will also find instructions for measuring openings and niches. Thanks to the video instructions, you will cope with any task:

• taking measurements;
• door assembly;
• door installation.

The videos show in detail the options for fastening doors of various systems.

Filling wardrobe doors with MDF

One of the popular facade materials is MDF.

Sliding wardrobe doors, developed by experienced designers, using high-quality materials and fittings, are distinguished by excellent characteristics. They work softly and silently, contribute to the practical use of the available space in the room, and also increase the aesthetics of the room, make it more attractive and in line with the tastes of users.

At ADEM GLASS, you can make an individual order for a closet door, which will be made with high quality and taking into account the interior features of the room where it will be used. You can order either a one-piece sliding door made of one type of material, or you can combine a door made of different materials. The page presents popular options for combining materials in compartment doors - choose.

Where to make sliding doors to order in Moscow?

Today, you can order the manufacture of doors to your size in different companies, but not all offer customers really favorable terms of cooperation.

Many customers choose ADEM GLASS because we offer:

1) Favorable prices. You can order a compartment door for your closet from us inexpensively. The cost of our products starts from 3,600 rubles.

2) Professional approach. We have been working on the market for more than 20 years, and every year we improve our service.

3) Quality assurance. Thanks to the use of only high-quality consumables in our work, we can guarantee that all our products will serve you as long as possible.

4) High speed of work. We quickly manufacture doors according to your dimensions and deliver finished products in Moscow to the address specified by the client.

5) Large selection. We are chosen because in our assortment there is a huge selection of glasses and mirrors with and without drawings for the manufacture of a door so that it is guaranteed to fit into the interior of your room, hallway, dressing room. The main advantage of our glasses and mirrors, which we use in wardrobe compartment doors, is that the pattern is applied by chemical etching, which visually looks presentable and is more expensive than, for example, sandblasting. Here you can choose an insert for the door compartment
e with any pattern, both in a classic style and in a modern one: geometry, floral pattern, monograms, feather, just plain colored glass or even an aged mirror - which looks simply incredibly beautiful in the compartment doors!

6) Practicality. In production, we use glass and mirrors with patterns or painted glass, which retains its consumer properties for many years, for example, compared to sandblasting.

You can see for yourself all the advantages of cooperation with us by ordering the production of a door, and we will do everything necessary to make you a happy satisfied customer!

Please contact us, we will be happy to advise you on all your questions and calculate the price of manufacturing a door for your cabinet.

The site shows retail prices. If you are a furniture maker, ask the manager for wholesale prices for sliding doors by phone: + 7 499-110-62-63.

Sliding wardrobes, not so long ago considered completely exotic interior items that could only be seen in glossy catalogs or in very “rich” apartments, gradually entered the everyday life of the average family. Such furniture designs combine practicality, spaciousness, and saving usable space, and plus all this, they fit very well into the interior of the room, often becoming its central design element.

And yet, if you look at the price lists of companies involved in the manufacture and installation of wardrobes, sometimes the prospect of such an acquisition looks somewhat frightening. Therefore, many owners who know how to hold carpentry and metalwork tools in their hands have questions - is it possible to make such a piece of furniture on their own? It turns out that this is quite possible. The biggest difficulty is the sliding door design. However, this should not be frightening - in specialized stores you can purchase special system kits that will help you assemble beautiful and functional doors for a sliding wardrobe with your own hands, of course, if diligence, accuracy, and a clear sequence of all technological operations are applied.

What is included in the wardrobe door kit

This article will not consider the installation process of the cabinet itself with shelves, side walls, drawers, etc. The point is completely different - the defining element of such a piece of furniture is precisely. By and large, no matter how paradoxical it may sound, a closet may simply not even be a “closet” in the literal sense of the word.

A variety of wardrobe options, which sometimes are not even "closets"

So, with a movable door structure, you can fence off a long niche in the wall, placing in the resulting space, both ordinary shelves and racks, bedside tables, etc. Often, such a partition separates the end part of the room, along its entire width, from wall to wall, and in height - from floor to ceiling. And the resulting mini-room can serve as a spacious closet, as well as a pantry, and sometimes even a small office. A similar design is also used for installation in the corner of a room or hallway - as a result, a triangular “closet” appears at the disposal of the owners, which can be used both as a closet and for other needs, for example, even for “home parking” of a bicycle.

In a word, there can be an incalculable number of options. But they all have one thing in common -. Properly mounted sashes move effortlessly along their guides, alternately allowing you to open one or another section of the “cabinet”, and in the closed position, tightly, without gaps, adjoin the vertical planes framing the structure.

Doors for wardrobe

It should not be assumed that numerous local firms engaged in the manufacture and installation of sliding wardrobes use some of their own developments or mechanisms. In the vast majority of cases, ready-made systems are used for this, which can be purchased at furniture fittings stores. Usually they are a certain set of metal (more often - aluminum) profiles and the necessary components: roller mechanisms, plugs, gaskets, jumpers, fasteners, etc. These systems help to assemble the frame structure of the doors and the mechanism for their movement, but each master is free to choose his own interior filling - mirrors, transparent or tinted glass, plastic, laminated fiberboard or MDF and other materials.

There are many such systems for wardrobe doors. They can differ in the configuration and material for the manufacture of profiles, the principle of mounting parts, the level of complexity of the roller mechanism, the adjustment system, etc. In our publication, the Aristo system will be considered, as one of the most popular, proven to be reliable, and quite simple to install on your own. In addition, it is pleasant to realize that these are the products of our domestic manufacturer, which has won recognition abroad.

Profiles "Aristo" are made of primary aluminum, have a well-defined geometry, which allows you to assemble door structures with high precision. The system involves sliding doors, the load from which falls on the lower roller. It is equipped with a metal rolling bearing that does not require lubrication during the entire service life, and ensures smooth and silent movement of the sash along the guide without much effort. The upper rollers play a stabilizing role, hold the web in a vertical position and ensure its smooth movement relative to the upper guide.

The manufacturer of the kits claims that the resource embedded in the mechanism, if properly assembled, will be enough for one hundred thousand (!) Closing and opening cycles - an indicator more than impressive.

The manufacturer offers a wide range of colors for aluminum profiles - it is possible to mount a structure that fits perfectly into the interior without standing out, or, conversely, contrasting sharply against the general background.

Wood-like profiles are covered with a high-strength two-layer laminating film, and monochrome details get their shade using anodizing technology.

Aristo profiles make it possible to manufacture sliding doors filled with glass (thickness 4 mm), compositions of glass with plywood or fiberboard (thickness 6 or 8 mm) or from chipboard, MDF panels (thickness 10 mm). The maximum dimensions of the door can be: up to 1500 mm wide, up to 3300 mm high, the permissible weight of one leaf is up to 160 kg.

What are the main components included in the Aristo system (the option with guides for two or more leaves is considered):

№№	Illustration	Dimensions	Short description
1.			Side stand-handle open type, asymmetrical, profile C.
2.			Side stand-handle closed type, symmetrical, profile H.
3.			The upper guide profile (track) is two-track.
4.			The lower guide profile (track) is two-track.
5.			Top door frame. The channel for screwing the assembly self-tapping screw is clearly visible.
6.			Bottom door frame. The same mounting channel for the screw, and the high profile shelves create a niche for placing support rollers in it.
7.			Medium door frame without additional fixation with a self-tapping screw. It is used when using several fragments of filling in the case when reinforced fixation of the jumper is not required - it will be held by the filling panels (for example, if hard chipboard or MDF 10 mm are used).
8.			Medium door frame with self-tapping screw fixation. It is able to give additional rigidity to the frame of the door. It is advisable to use when used as fragments of glass or mirror filling, or when the dimensions of the entire door leaf structure are significant.
9.			Direct emphasis. Optional element. It is used to frame the vertical sides of the opening at their junction with the walls.
10.			Shape emphasis. Optional element. It is used to frame the vertical sides of the opening, if they are walls made of chipboard panels.
11.			P-profile. Optional element. It can be used for framing the ends of chipboard panels used in the installation of the cabinet structure, in places where they adhere to the floor, ceiling, walls.
12.		-	The roller is top symmetrical. It is used when using closed vertical H profiles.
13.		-	The roller is top asymmetric. Used when using open vertical profiles C. Each sash requires a set of two rollers.
14.		-	Lower support roller with adjusting screw. Each sash requires a set of two rollers. The AB74 adjusting screw has a 6mm Allen head.
15.		-	Assembly screw AB75, with self-tapping working part. Head - for an internal hexagon 6 mm. One screw per connector.
16.		-	Spring stopper. Optional element. Provides locking of the door in the closed position.
17.		-	Silicone rubber seal. It is laid along the perimeter of the door filling inserts. It differs in size - a seal is available for inserts of 4, 6 and 8 mm thickness. When using filling with a thickness of 10 mm, the seal is not used.
18.		-	Schlegel is a self-adhesive strip made of plastic and pile. It is glued along the entire height of the door leaf from the end part - for this, a special groove is provided on profiles C and H. Schlegel softens the blows of the sash against the walls of the cabinet, and when the door is closed, it prevents the penetration of dust.

There are several more items that can be purchased at will - closers, magnetic stoppers, locks, end caps for profiles, etc. But they no longer directly affect the process of assembly and installation of wardrobe doors in question.

The principle of assembling doors for a sliding wardrobe with the Aristo system

In the configuration of profiles and fittings of the Aristo system, everything is thought out, so the installation of the door structure should not cause great difficulties.

A schematic diagram of the assembly of one door leaf with vertical profiles of type C is shown in the drawing. Hereinafter, the numbering of profile and fitting elements is observed in full accordance with the detail table above.

Profiles 3 and 4 are fixed to the ceiling (cabinet lid) and floor (cabinet base) respectively, and are fixed parts of the system.

The installation of the door leaf structure is carried out using assembly screws (pos. 15). #14a shows the bottom roller adjusting screw.

The drawing does not show the option of the central horizontal jumpers, if they are needed. But their installation is fundamentally no different. They are either simply inserted without additional fixation (there are special sides for precise centering on the inside of the vertical uprights), or they are fixed to the assembly screw in the same way as the upper door rail.

Below is an assembly drawing for the option using a vertical profile type H.

There is no fundamental difference - just a different, symmetrical type of upper rollers is used for these profiles. True, there will still be differences in the calculation of dimensions and in the installation of upper and lower guide profiles (runners).

Calculations of the dimensions of the doors for the sliding wardrobe of the Aristo system

The assembly of the door will only turn out to be of high quality if careful, to the millimeter, calculations are carried out, and a very accurate preparation of the parts will be made according to the obtained dimensions. No negligence, calculations “by eye” are not allowed - this will certainly lead not only to a sloppy look, but also to distortions and even jamming of the door structure.

Calculations are carried out in the following sequence:

• The exact dimensions of the opening into which the door structure will be installed are determined.

The diagram shows wall structures, floor and ceiling, but it can also be the walls of a mounted cabinet - the principle does not change from this.

Initial dimensions - the length and height of the opening in which the movable door structure will be installed

At the output, we have two values: the length of the opening - Lp and its height Np, from which further counting will go.

It is extremely important to pay attention to the fact that the upper and lower borders of the opening must be strictly horizontal along their entire length. If the deviation from the side walls from the vertical, although highly undesirable, can still be somehow compensated for by decorative trim, then even small deviations from the horizontal will lead to looseness or jamming of the movable doors.

Often, in order to compensate for small irregularities in the floor and ceiling, and to facilitate further fixing of the guide profiles, even panels (strips), for example, from chipboard, are mounted from above and below along the entire length of the opening. In this case, the height of the opening is measured after the installation of such linings, or their thickness must be taken into account - subtracted from the total height of the opening.

• After measuring the opening, you can immediately get the height of the door structure, that is, the length of the required vertical handle profiles (1 or 2).

Regardless of the profile type, it is always equal to

Nd \u003d Np - 40 mm

• opening length Lp immediately gives the length of the profiles of the lower and upper guides (3 and 4).

There may be a nuance here. If it is planned to install a frame from a straight or shaped stop (profiles 9 or 10), then the length of guides 3 and 4 will decrease by 3 mm (1.5 mm on each side due to the thickness of the frame).

Ld =Lp - 3 mm

The length of profiles 9 and 10 is always equal to the "clean" opening height Np.

• The next question is the width of the door leaf.

This indicator depends on the total length of the opening and on the planned number of movable sashes, and on the vertical handle profile used, and even on the presence or absence of a Schlegel.

With significant lengths of the opening, you should not chase the large width of the door leaves - they turn out to be too massive and not very convenient to use. It is quite possible to place two, three, four and even five wings on two-track guides. Despite the fact that even 1500 mm is allowed, they usually try to keep the width of each within 750 ÷ 900 mm.

Initial value for calculating the sash width ( Lc) - opening length Lp and the planned number of doors.

The following ratios are used for calculations:

	The presence of Schlegel	Profile C	Profile H
2 doors	- without shlegel	Lc \u003d (Lp + 25) / 2	Lc \u003d (Lp + 35) / 2
	- with schlegel	Lc \u003d (Lp + 15) / 2	Lc \u003d (Lp + 25) / 2
3 doors	- without shlegel	Lc \u003d (Lp + 50) / 3	Lc \u003d (Lp + 70) / 3
	- with schlegel	Lc \u003d (Lp + 40) / 3	Lc \u003d (Lp + 60) / 3
4 doors	- without shlegel	Lc \u003d (Lp + 50) / 4	Lc \u003d (Lp + 70) / 4
	- with schlegel	Lc \u003d (Lp + 30) / 4	Lc \u003d (Lp + 50) / 4
5 wings	- without shlegel	Lc \u003d (Lp + 100) / 5	Lc \u003d (Lp + 140) / 5
	- with schlegel	Lc \u003d (Lp + 90) / 5	Lc \u003d (Lp + 130) / 5

In order not to get confused in the formulas, we suggest using the built-in calculator, which will quickly calculate the required sash width

Functional and beautiful furniture is a guarantee of comfort and coziness in every home, so the choice of such interior items should be approached carefully. But what to do if there was no wardrobe suitable for design or size in the store? Then the assembly of the wardrobe can be carried out independently. But for this, you should learn how to make doors for a sliding wardrobe with your own hands, and then install them.

A closet of a compartment design is a system, the acquisition of which will make it possible to successfully plan the space of a room, emphasize the features of the interior, and solve the issue of storing personal belongings. As soon as such furniture appeared on the domestic furniture market, buyers immediately fell in love with it for a huge number of advantages.

Many do not dare to assemble a closet on their own, but in fact it is not so difficult if you prepare and divide the work into stages. You should start with the purchase of the necessary materials, the volume of which depends on the chosen size of the structure. Therefore, the first thing to decide is what material to use and what dimensions the structure will be.

To create compartment furniture, the following materials are used:

• Chipboard - belongs to the category of common and affordable materials for the manufacture of doors for a sliding wardrobe. Chipboard is diverse in color, practical, easy to cut. If you decide to assemble a sliding wardrobe with your own hands without experience in such matters, opt for chipboard;
• MDF is a more expensive material than chipboard, but it has higher performance characteristics. MDF is afraid of moisture, under the influence of which the film can lag behind the base, which will significantly worsen the appearance of the furniture. But in general, the 2-door wardrobe made of MDF looks very dignified;
• solid wood is a durable, incredibly beautiful, wear-resistant option. But it is not cheap, and only an experienced furniture maker can work with natural wood. If you are a beginner, it is better to choose a material that is easier to work with - chipboard or MDF.

The dimensions of a particular cabinet are selected for the room in which it is planned to be installed. Look around and take measurements to understand what length, width and height of furniture will be most successful. The height of such furniture may vary.

Models of non-standard sizes are made to order or independently. Experts insist that in small rooms the closet must be made as high as possible. This will allow you to fit the maximum number of things into it.

Front options

Drawing and detailing

Today, sliding wardrobes are popular among residents of small city apartments and owners of spacious country cottages, because they have high functionality, practicality, serve for a long time without breaking, and retain external attractiveness for a long time. You can fit such an interior item into almost any size, style room. And to spend the minimum amount of money on this, make the furniture yourself. How to make wardrobe doors and what is required to start assembling wardrobe doors? Drawings and drawing the details of the future design, indicating where this or that fastening will be performed, will significantly speed up the work.

Part preparation

To save money, many people are interested in whether it is possible to do without the help of experienced furniture makers and how to make do-it-yourself wardrobe doors. To begin with, the preparation of the installed parts is carried out. After the most relevant material has been selected (chipboard, MDF or natural wood), accessories have been purchased, you can proceed to work. You will need to create a reliable frame from pre-prepared parts:

• two side walls;
• lid;
• bottom.

Shelves and storage systems will subsequently be mounted inside the structure.

A sheet of selected material is cut using special equipment that cuts out the described details of the future cabinet with high accuracy. If there are no special tools for this, you can order cutting material from professionals. After cutting, the parts are processed, covered with end caps to make them more aesthetic. Next, we will tell you how to assemble doors and get a full-fledged piece of furniture with a minimum of costs.

Sash design without filling

Profiles can be different, therefore they must be measured individually

Assembly

When the details of the future design are prepared, assembly can begin. How to assemble a wardrobe without mistakes? To do this, a detailed diagram of the assembly and installation of the doors on the closet is created. Then, using a drill, you need to organize holes in the sides, roof and base. Its individual parts are connected into a single frame with the help of special fasteners. To increase the maximum level of permissible load on the cabinet, the joints of the base and the top cover with the sidewalls of the structure are reinforced with special metal corners. The back of the furniture is covered with a thin sheet of chipboard, and supports are attached to the base.

You will also need holes for the pins in the side walls of the furniture. This will be required for the subsequent installation of shelves inside the product. If necessary, storage systems of a certain kind of things are mounted inside the structure: vertical crossbars with hangers, a trouser rack, and the like. If the assembly stage is completed, proceed to the most difficult. It is the installation of doors that will be the most responsible process in all work.

Assembly diagram

Mounting profiles and frames

If you have completed the assembly of the sliding wardrobe doors, you can proceed to the installation of the profiles and the frame of the structure, along which the sliding canvases will move. However, a prerequisite is that the door leaf is exactly level, otherwise problems will arise during the subsequent operation of the sliding wardrobe, and the level of comfort for the user will be low.

After measuring the length of the cabinet from the inside, using a hacksaw, cut a profile of the same size and fix it on the top and bottom cover with a screwdriver and self-tapping screws.

In order to prevent damage to the profiles, experts recommend using any convenient support during the organization of holes. For example, you can use a table or chair for this purpose. And the holes made should be carefully sanded with sanding paper. Holes should be organized on the profile with a step of 50 mm, this rule should not be violated so that there are no problems during the operation of the structure in the future.

To securely fix the lower profile, it is worth organizing similar holes for self-tapping screws, but you should not rush to fix the guide inside the structure. It is important to choose the right place for its attachment. It is shifted inside the cabinet by 20 mm, since the depth of the furniture will decrease by the width of the compartment doors. Sometimes it happens that the doors are set too deep. This spoils the appearance of the furniture, reduces its aesthetic qualities and comfort.

You will also need to mount the latches so that the doors stop in the closed position and a gap does not form with the sidewall. The stopper is installed in the groove of the lower rail. To mount the latch in the required place, the compartment doors are tightly closed, after which a mark is made on the lower rail for the center of the wheel. A stopper is inserted here, which is easy to move with a flat screwdriver.

A silicone seal is used to install the mirror in the profile.

The mirror is inserted into the profile frame

Three holes are made in the vertical longitudinal guides

Profile drilling

The frames are fastened together with self-tapping screws.

Lower profile fasteners are also fasteners for lower rollers

Roller attachment

Guides for the door leaf are fastened with self-tapping screws with press washers

Door fixing

Next, we describe in detail how the do-it-yourself installation of the sliding wardrobe door takes place. The order of stage-by-stage assembly of doors and correctly selected tools are largely determined by the type of door being made and the specifics of its fasteners on the furniture body. It can be one of two models:

• suspended;
• rail.

suspended

Roller

Suspended

If you have decided to make hinged doors, then experts recommend installing doors on a sliding wardrobe with your own hands by studying the specifics of working with such systems. The 2-door wardrobe with suspended canvases has a special compartment mechanism, which is not mounted inside the structure, but superimposed on the facade. It consists of two guides, but the highest load falls on the top rail. Suspended mounting of sliding systems allows you to veil the ends and roofs of the side facades from the eyes behind the doors. As a result, the design after installing the cabinet doors looks incredibly concise, elegant, beautiful.

Hanging door fixing

Rail

The description of the installation of rail structures with your own hands differs from the description of the stages for suspended ones. The peculiarity lies in the fact that the rails are mounted inside the cabinet frame. At the same time, the lower one should be hung a little with an offset inside the cabinet, since it will have the highest load.

You need to hang rollers on the canvas, with the help of which it will move in the rail. Next, the canvas must be very carefully inserted alternately into pre-installed guides. To do this, insert the upper part of the door into the guides, after which we put its lower part.

To check the doors for perfect vertical installation, you should use a spirit level. If the work is done carefully, the need for adjustment at a later time will disappear.

Experts insist that the rail doors on the cabinet should not be placed at a corner, as this can provoke profile deformation. Whatever design is chosen, do not forget that limiters will definitely be required. Such a detail must be attached to the cabinet door.

The video shows the step-by-step instructions for the work by an experienced craftsman, which will once again demonstrate how to put the doors on the closet. After reviewing it, you will know exactly how to install the sliding wardrobe door, and the instruction with the photo will help facilitate this process.

Roller mount