Radiator meter-distributors, individual metering. Danfoss heat meter - high accuracy of heat consumption measurement Individual Danfoss heat meters

Danfoss supplies unique solutions to the Russian market, including equipment for metering heat consumption. The assortment includes a wide variety of product types:

ultrasonic;
mechanical;
distribution meters

etc.
Each Danfoss heat meter is an innovative type of equipment that is designed on the basis of modern technology and has advanced functionality. For example, the latest SonoSelect / SonoSafe models built on ultrasound technology are highly accurate, convenient and reliable. They take into account all the latest developments, including the ability to control using a smartphone through the SonnoApp application. Our company is ready to supply you with any model of equipment for heat metering you are interested in. You can buy from us:

apartment heat meter Danfoss;
general house heat meter;
distributors;
accessories for installation and operation of equipment.

Please also note that we supply solutions for complex automation, including M-Bus dispatching SonoCollect 110. This popular solution allows you to organize the collection and transmission of data on heat consumption in automatic mode. A very interesting solution!

The Danfoss T-34 heat meter, designed for general house use, is also very popular. It is effective in both closed and open heating and hot water systems. The equipment is designed reliably and with high quality - practice shows that its use does not require large operating costs, and accuracy makes it possible to reliably take into account heat consumption for any period of time. Our company has the opportunity to supply you with this equipment at a very favorable price.

In addition to general housekeeping, we also offer application models. For example, the Danfoss M Cal Compact apartment heat meter is very popular - the price, quality, reliability and availability of control software make it in demand on the market. We recommend you pay attention to it if you are looking for equipment for use in your apartment. We also recommend paying attention to the SonoSelect / SonoSafe ultrasound model, which can be controlled remotely via a smartphone. Very comfortable and modern model.

And a little about the advantages of our offer:

direct deliveries from the manufacturer;
good price without "markups";
official guarantee and reliable service;
assistance in setting up and installing equipment;
free consultations when choosing models.

If you are looking for a reliable supplier, then you can always profitably buy a Danfoss heat meter from us - the manufacturer's price, a good guarantee and fast order execution will appeal to you.

The Danfoss heat meter is a device that is designed to measure and record heat energy in apartments. This type of meter can be apartment and house, they are often used in heating systems, as they show the maximum accuracy. This allows complete control over energy consumption, which ultimately saves resources.

The danfoss heat meter includes a flow meter and a calculator. This device can be called universal, the heat meter circuits allow it to be built into both newly created systems and those already in use.

Apartment counters

Danfoss residential heat meters have long been recognized by a large number of Russian consumers. Manufactured by a Danish company, the production takes into account real operating conditions, so the devices are as reliable and convenient as possible.

The working environment of the Danfoss heat meter is water, which in most cases can have a maximum temperature of up to 90 degrees. In some models, there are additional functions that allow you to work at temperatures up to 150 degrees.

Household heat meters

The general house meter danfoss is designed to keep track of high costs and loads of thermal energy. With its help, it is possible to determine the heat consumption in general, making payment upon consumption.

Accounting can be conducted according to an open or closed scheme. Also, with the help of this device, the thermal power, the level of consumption, the amount of coolant and other parameters are monitored.

The price of a Danfoss apartment heat meter will depend on the specific model. But in order to correctly determine the choice, it is better to consult with specialists who will answer any of your questions.

Danfoss heat meters are a highly efficient, high-quality and functional product of Danish origin, allowing you to control the calculation of the heat carrier flow. They can be installed in residential, office, commercial, industrial, office buildings. Thanks to the design features of each model, it will be possible to achieve the ideal result for consumers in accordance with the goals and objectives. And the use of innovative technologies and high-quality materials makes it possible to create products with excellent performance and functionality.

How to choose the right Danfoss heat meters

Products manufactured in Denmark have gained universal popularity and fame throughout the world. It will be necessary to meet the installed heat devices. The presented wide assortment enables all those in need to use their financial resources as efficiently as possible to achieve the desired result.

power supply
measurement accuracy and level of error
dynamic measurement range
functional content
connection method
cost.

Almost the entire model range is characterized by rather small dimensions, which provide additional convenience when performing installation work.

Key benefits

Danfoss heat meters are an intelligent device that will save quite impressive money when heating premises of various kinds. Due to the presence of an intelligent "filling", the device efficiently calculates the energy resources spent.

Each production stage is tightly controlled. Danfoss heat meters undergo a series of tests and tests in the factory. If the manufacturer's instructions for installation and operation are observed, a long period of operation of the devices is guaranteed.

Other advantages include

possibility of installation in any position
high accuracy of flow measurement
increased wear resistance
low pressure loss.

Varieties of Danfoss heat meters

The manufacturer presents several models of heat metering devices, which allows consumers to choose the most ideal solution according to their needs. They are classified as follows:

ultrasonic compact - used for commercial metering of heat energy in closed heating systems
ultrasonic flow meters - used to calculate the amount of consumed resources in public utilities and various industries
meter-distributors - are installed in apartments with vertical distribution of heating, where several heating pipes pass.

Profitable investment

It is worth buying Danfoss heat meters today for all those who want to significantly reduce their costs for heating rooms of various kinds. An inefficient heating system forces consumers to pay huge bills for consumed energy resources. With the advent of this kind of devices and devices, you can significantly reduce costs. In some cases, the payment is reduced to 70%. It makes no sense to enrich the pockets of the owners of heat supply companies.

Danfoss heat meters prices are quite competitive and acceptable for the modern buyer. The money spent is paid off in one or two heating seasons. Installing heating meters is a smart and correct step that will bring a huge amount of dividends in the future.

In the TEPLOSTOK company you can order radiator heat meters (distributors). We are pleased to offer products of the well-known INDIV brand, as well as all the necessary components for it on favorable terms.

The relevance of using the presented models

Individual heat metering allows you to save heat energy and pay for it in accordance with actual consumption. In systems with vertical wiring, radiator distribution meters are used.

The models presented in our assortment meet all the established requirements and have an intertesting interval of 10 years.

Basic models of heat distributors

INDIV-3 and INDIV-3R versions. These valves have one built-in temperature sensor. Such devices use the principle of accumulating the resulting reading over time at a rate that is determined by the output signal of the built-in sensor.
INDIV-3R2 and INDIV-3RD versions. These models have 2 temperature sensors (heater surface and ambient air). In the INDIV-3R2 distributor, both sensors are built into the housing. In the NDIV-3RD device, the air temperature sensor is built-in, and the heater surface sensor is external.

All valve types allow storing and displaying the resulting reading on a predefined day of the year. The devices are used in internal heating systems.

Any valve can be installed on:

Sectional radiator in cast steel or cast iron.
Aluminum radiator.
Tubular and panel radiators.
Pipe registers.
Convectors.

The heat distributor solves the following tasks:

Accumulation of consumption readings.
Display of consumption readings for the previous year.
Checksum indication for verification.

In addition, the valve is equipped with a self-test system.

Specifications INDIV-3:

Design temperature range in heat supply systems: 55-105 degrees Celsius.
Starting temperature of the reference point: June-August: 40 degrees Celsius, September-May: 30 degrees Celsius.
Heat distributor power supply: lithium battery.
Dimensions: 40x76x25 mm.
Valve measurement accuracy: complies with European standard EN834.

Advantages of ordering heat distribution meters in our company

A wide range of models. You can order the distributor of the teplo both of the previous and the latest generation.
Optimal cost. You can order any valve model at a favorable price with a discount. We offer wholesale and regular customers participation in special promotions.
Help in choosing. Our experts are ready to tell you about all heat distributors and answer your questions.
Sufficient stock of products. You can order from us heat distribution meters in any required quantity without long waiting for deliveries from the manufacturer.
Prompt delivery. You can start using any distributor in the near future. The heat distribution meters are transported by the company's own transport in Moscow and in the regions.

Code number	Description	Price (EUR)	Sketch
088H2330	Radiator meter-distributor in compact design INDIV-5 with visual reading of indications from LCD display	30,83
088H2203	Compact radiator meter-distributor INDIV-3R with remote wireless data transmission (radio)	43,39

New generation radiator meter-distributor INDIV

Code number	Description	Price (EUR)	Sketch

187F0001	Radiator-distributor meter in compact design with LCD display replaced INDIV-5	43,39

Code number	Description	Price (EUR)	Sketch
088H2250	Pulse adapter two-channel INDIV PAD for connecting 2 meters (water, electricity, gas) with pulse output	74,79
088H2251	Network node, standard with independent power supply NNB-Std	306,28
088H2257	Network node with communication module for remote reading with GSM-interface NNV-GSM (mains powered)	1595,22
088H2254	Network node with communication module for remote reading with RS232 interface NNV-232 (mains powered)	459,42
088H2256	Network node with communication module for remote reading with Ethernet interface NNV-IP (mains powered)	1512,26

Accessories for radio tuning and reading

Radio software

Code number	Description	Price (EUR)
	Parameterisation program for Indmet meters
	Program for reading data from Indread counters
	Indserv utility program for configuring and reading data from the INDIV AMR system
	Parameterisation software for Indcomm main node including connecting cable

Kit for mounting the meter-distributor on cast iron sectional radiators

The gap between the sections is no more than 34 mm

Code number	Description	Price (EUR)	Sketch
088H2211		1,32
088H2230	T-nut, 65 mm	0,85
	Bolt M 4 x 35 mm
Kit cost

The gap between sections is more than 34 mm

Code number	Description	Price (EUR)	Sketch
088H2212	Thermal adapter, standard, 55 mm	1,32
088H2230	T-nut, 65 mm	0,85
	Bolt M 4 x 35 mm
Kit cost

Kit for mounting the meter-distributor on panel radiators

Code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Tail nut М 3 х 6 mm (it is required to order 2 pcs. For 1 counter)
	Welded bolt M 3 x 10 mm (you need to order 2 pcs. For 1 meter)
Kit cost

Kit for mounting the meter-distributor on convectors

Installation on "ribbing" (convectors "Universal", "Santehprom-Auto", KV)

Code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
088H2270	Threaded rod M 3 x 330 mm	2,81
	Slotted nut М 3 mm (it is required to order 2 pcs. For 1 meter)
Kit cost

Installation on a "roll" (convectors "Accord", "Comfort", "Progress")

Code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Tail nut M 3 x 6 mm (you need to order 2 pcs. For 1 meter)
	Welded bolt M 3 x 10 mm (you need to order 2 pcs for 1 meter)
Kit cost

Kit for mounting the meter-distributor on tubular radiators

Code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
088H2241 or 088H2242	T-nut, 36 mm or 45 mm	6,96
	Bolt M 4 x 35 mm
Kit cost

Kit for mounting the meter-distributor on aluminum radiators

The gap between the sections is not more than 4 mm

Code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Self-tapping bolt C 4.2 x 25 mm (you need to order 2 pcs. For 1 meter)
Kit cost

The gap between sections is more than 4 mm

Code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Square studs (you need to order 2 pcs for 1 meter)
	Screw M 3 x 25 mm (you need to order 2 pcs. For 1 meter)
Kit cost

Optional equipment

Code number	Description	Price (EUR)

Santekhkomplekt is an official dealer of Danfoss sanitary fittings, known in the world market. On the company's website, you can purchase high quality apartment heat meters. Depending on the purpose, heat meters can be apartment and house. Danfoss apartment heat meters are incredibly easy to use and allow accurate heat metering in every apartment.

Apartment heat meter is a device for accurate measurement and registration of the consumption of heat energy for a separate apartment.

Danfoss individual apartment heat meters are widely used in heating systems and provide high accuracy of calculation and display of the necessary data, which allows you to control energy consumption and, therefore, save resources and money. Danphos heat meters consist of a flow meter and a calculator.

These devices are universal. The existing schemes of heat meters make it possible to integrate them not only into the systems under construction, but also into those already in operation, although it should be remembered that in the second case it will be necessary to redo the engineering network.

Individual heat meters Danfoss

Danfoss meters are manufactured taking into account real operating conditions, so the Danish company's devices are an excellent choice for individual metering of heat energy. Danfoss individual heat meters, safe and convenient. The heat meters VIS, VKT 7, T 21 Kombik, TSK 7 presented in the product line are reliable, trusted and popular with many Russian consumers. Danfoss heat meters provide accurate heat metering, so you never have to overpay for heat.

The working environment of such heat meters is water with a maximum temperature of up to 90 ° C. Some models of individual Danfoss heat meters have additional functions, therefore they can operate at higher temperatures - up to 150 ° C.

The Santekhkomplekt company offers only the best equipment for metering heat energy. apartment heat meter Danfoss, durable and reliable to use!

Household heat meters

You can also buy general house heat meters from us, designed to account for high costs and high loads of heat energy. Heat meter for home allows you to determine the amount of consumed heat in general, making payment upon consumption. Heat energy metering can be carried out according to an open and closed heat consumption scheme. The general house heat meter monitors such parameters as heat power, heat carrier flow rate, amount of heat carrier, heat carrier temperature and their differences, and others. Heat meters perform many functions: measurement, calculation, archiving, indication and output of indicators to external devices.