What homemade products for the household can be done by hand. How to make homemade machines and accessories for a home workshop Various useful homemade products

It's nice to see when a person has made all and other household items with his own hands. To simplify the process of cutting metal or sawing out elements from wood, they build homemade machines and devices for a home workshop. Such a solution saves not only time for the manufacture of products, but also money for the purchase of finished products. We will consider several practical and interesting options below.

DIY pipe bending machine

Read in the article

How to use homemade machines and tools for your home workshop

The use of homemade machines and devices for a home workshop is aimed at solving several problems:

Simplification of the metal processing process. In the course of creating household items, a metal cutter or press is often required.
Improvement of wood processing. Even to build a small shed or make a wooden one, others are needed.

Buying a ready-made tool is quite expensive, so the use of home-made machines and accessories for the garage is becoming more and more relevant every day. Among the most common home tool options are:

joiner's workbench;
device for quick sharpening of knives;
device for sharpening metal drills;
drilling machines;
press;
cutting disc machines.

Here are some photos of do-it-yourself tools and devices from "homemade products":

1 of 4

Practical DIY tool shelves

Before creating the devices and with your own hands, determine the storage location for all the devices, so that later you do not search throughout the workshop or where what lies. It is not difficult to make a shelf for tools with your own hands, the main thing is to decide on its dimensions and material of manufacture.

The easiest way to make shelves is to assemble them from wood. Do not forget about the need to cover the finished structure with a protective varnish or to prevent wood from rotting and swelling.

You can create a combined version of a metal support and wooden shelves. Here are detailed instructions for creating such a homemade model:

Picture	Sequencing
	Assembling the frame. To do this, prepare two side frames, consisting of 4 corners. Connect the elements with. Then, pull 2 \u200b\u200bframes together using 4 corners.
	When the frame is completely assembled, proceed to making the shelves. They can be made from wood or metal, as well as from other available dense materials. It is enough to cut canvases of a suitable size and fasten them to a metal base.
	If desired, you can make the rack movable by fixing four small wheels. Or install it firmly in the designated spot in the garage.

You can find other interesting projects and drawings for making tool shelves. Watch a video on the topic:

And also to make useful household appliances with your own hands:

1 of 4

We make a carpentry workbench with our own hands according to the drawings: video instructions and photo examples

Among the common devices with their own hands, a workbench is distinguished. Strong and dimensional, allowing you to securely fix the workpiece, useful for high-quality cutting of wood and creating various elements from it.

The package includes:

Working surface. For her, use a solid one to increase the life of the device. The thickness must be at least 6 cm.
Supports. Collected from wooden beams or metal plates. The main task is to ensure the stability of the entire mechanism.
Vise for fixing the product. If the table is long, you can install two vices at once.
Tool box. Useful recess or pull-out design for quick access to the small parts you need.

To independently assemble a carpentry workbench for your workshop, you should choose a drawing, purchase material for work.

DIY carpentry workbench drawings

Before buying materials for assembling your own workbench, you should think about a detailed drawing. It should include the dimensions of the machine itself, it is advisable to note the dimensions of the materials used and their quantity.

For example, a ready-made drawing of a folding workbench with your own hands may look like this:

Whichever model you choose to create, consider several features of the desktop that make it easy to cut wood:

the height and length of the hands of the master: the height and width of the tabletop depend on these parameters;
which hand is working: place a vice to the right or left;
what blanks will be made: choice of table shape;
what area in the room set aside for the workbench.

Considering all these parameters, it will be easier for you to decide on the drawings of the joiner's workbench and the dimensions of the machine. Here are some interesting examples:

DIY instructions for assembling a wooden workbench

You can buy a wooden workbench in a store or through online catalogs, but it's cheaper to make one yourself. Let's take as a basis a simple version with typical tabletop dimensions: length - 150-200 cm, width 70-120 cm.

The manufacturing work will include several stages:

Picture	What need to do
	Make the top cover from thick ones so that you get a shield with a width of 70 to 200 cm. Fasten the elements with long nails, and you need to drive them in from the outside, and carefully bend them from the inside. The working surface of the workbench is made only of wood or.
	Sheathe the lid along the lower perimeter with a 5 x 5 cm bar. This will make it more convenient to attach the vertical supports. The location of the supports depends on the size of the tabletop. It is better to make them from a thick rectangular bar of at least 120 by 120 mm.
	The carpentry workbench must be installed correctly. Be sure to secure it firmly. If it will be mounted outdoors under a canopy, then dig holes for the supports. Use other fastening methods indoors.

When the structure is assembled, install a vice on it. To fully understand how to assemble a carpentry workbench with your own hands, watch the video:

Making a joiner's vice for a workbench with your own hands

Professional "homemade products" assemble not only tables for work, but also a vice with their own hands according to drawings. Any design of such a clamp will include several elements:

Supports where each one falls with a clamping jaw.
Moving clamping jaw.
Metal guides. A sponge moves along them.
Lead screw for moving elements.
Vorotka. Required to rotate the screw.

When making homemade vices with your own hands, you can use various materials at hand. For example, there is a design option from a profile pipe. To do this, prepare several pieces of pipe of different sizes, a steel pin with a coarse thread and double nuts.

Instructions for creating a vertical vise from a profile pipe:

Picture	What need to do
	The largest pipe acts as a body. Supports are soldered to it from below. On the back side, a 3-4 mm steel flange is put on. In the center, a hole is drilled for the running nut, and opposite the front support, the rear jaw.
	Front steel flange on the inner movable part. A stud is mounted in it, with lock nuts fixed to it. Thrust washers are put on both sides of the flange. The last element is a movable tube attached to the front jaw.

And also watch the video "do it yourself vise at home":

DIY metalwork workbench drawings

Locksmith's metal workbench does not differ much from the carpenter's one. It is based on a rigid metal frame, not a wooden frame. A vice is attached to it, and the entire workbench is designed to withstand the force of a blow with a sledgehammer.

Do-it-yourself metal workbenches can have one, two or three pedestals, and also do not have shelves and drawers for small parts. In terms of strength, for working in a garage, you can make an ordinary table of metal up to 5 mm thick and a reinforced structure, where sheets from 10 to 30 mm are applicable.

Here are some useful blueprints for making a metal workbench for your workshop:

How to make a tool for sharpening knives with your own hands: drawings and photo examples

No house can do without a knife in the kitchen. It is quite difficult to make the correct one without special devices: it is necessary to maintain the desired angle and achieve the ideal sharpness of the blade.

A certain sharpening angle must be observed for each knife:

The razor and scalpel require an angle of 10-15⁰.
Knife for cutting bakery products - 15-20⁰.
Classic multifunctional knives - 25-30⁰.
For hunting and hiking, take a device with a blade angle of 25 to 30⁰.
If you want to cut hard materials, then sharpen at an angle of 30-40⁰.

To ensure the desired angle, it is worth buying or making a sharpener. For example, you can assemble a sharpener with your own hands.

A comment

Tool selection specialist "VseInstrumenty.ru"

Ask a Question

"If you do not use sharpening every day, then 1000 rpm is enough for a high-quality result and a long service life of the device.

To assemble such a machine, a 200 W washer motor is useful. Completely to create a sharpener from an engine from The progress of work on creating such a simple device will be as follows:

Sand the wood blocks with sandpaper to remove any burrs. Make the markings depending on the desired angle.

Attach a stone to the line you drew to sharpen the blade. To do this, attach it to the bar and mark its width. Then, on the markings, make cuts, up to 1.5 cm deep.
In the resulting grooves, fasten the abrasive bars so that the grooves coincide. Then, install the sharpening stone by screwing it onto the bolts.

There are many ways to make a home knife sharpener. Pick the right one and try to create a convenient and useful tool for your home.

How to make a tool for sharpening a drill for metal with your own hands

They independently make not only a sharpener for blades, but also a machine for sharpening drills for metal. Here are some blueprints useful for the job:

Ready-made home machine The simplest and most common version of such equipment for a garage is a converted drill. For work you will need:

bed for the base;
rotation mechanism;
vertical rack.

For the stand, either boards are usually used. The drill is lightweight, so there is no need to use metal. In this case, the bed must be made massive in order to reduce vibrations during the operation of the device.

To correctly connect the bed and the vertical rack, as well as assemble all the equipment into one whole machine, pay attention to the video instruction:

Drawings with dimensions for a drilling machine do it yourself

To correctly make any machine or practical device for private use, you should first make a drawing with dimensions. Only then start preparing materials and assembling the device.

Here are some examples of DIY drill machine drawings:

And you can also make a homemade vise for a drilling machine. Below is a video instruction for assembling such a device:

Article

Interesting homemade products for giving are waiting for you in this article. You will learn how to make a lawn mower from an old washing machine, make a sink, a country shower, a dryer from scrap materials.

Useful homemade products for giving - do it yourself washing

Not everyone has the financial ability to buy a car "Karcher". If you can't get it, why not invent it? A homemade car wash will eliminate the need for running water, reduce water consumption and thoroughly wash your car, fence, garden path, or other items.

Here's what you need for such a homemade product for a summer residence:

a plastic canister with a capacity of 5–20 liters;
set of hose connectors;
automobile nipple;
piece of hose;
silicone sealant;
sharp knife;
compressor or car pump;
watering gun.

Take a hose nozzle kit that contains 2 connectors, 3/4 threaded nipple, 1/2 reducer.

Here is the principle of operation of such a homemade product for a summer residence: you connect the gun to the hose, attach this device to the bottom of the canister. A nipple will be built into its neck.

Fill the container with water, but not to the top. Then screw the cap back on and pump air in. This will create pressure and water will run well when you pull the trigger of the gun. Here's how to assemble such a mini-sink.

Carefully cut a hole in the cover with the tip of a knife. It should be slightly less than the diameter of the nipple stem. Also cut a circle of the correct diameter at the bottom of the canister side.

Insert the nipple into the cover.

Now, helping yourself with the wire, put the sleeve in the hole provided for it. Apply silicone sealant to secure the junction of the sleeve to the canister.

It is necessary to tighten the lid and perform the rest of the work only after the sealant has completely solidified. Then you connect one end of the hose to the water gun and the other to the canister.

Pour water into a container, but not to the top, so that there is room for pumping air. But do not pump too much so that the canister does not deform and burst under pressure. See how the union should be screwed in and the connectors installed.

If everything is done correctly, then when you pull the trigger of the water pistol, the water will gush with a good stream. You can adjust the pressure by twisting the tip of the gun.

In the country, you can hardly do without a shower. Try to make unusual, and tropical, then you can enjoy even more water treatments.

How to make a rain shower from scrap materials for a summer residence?

If you have just recently purchased a plot and you do not yet have a washing room, then you can take a shower right on the street, fencing a small area near the fence with a curtain. To make such a rain shower, very few components are required, these are:

bracket;
wire;
flexible hose;
metal beer can;
hose adapter;
awl;
nails.

Nail the metal bracket onto the wooden fence to make the fixture at the correct height. Screw the adapter to the end of the hose, fix it on the slots of the beer can. The junction can be treated with a sealant. Use an awl to make many small punctures in the jar.

Wire the top of the hose to the bracket and attach the other end to the water supply or pump. When you lower the pump into a barrel of heated water, you will be able to enjoy a pleasant water treatment.

You can also make a rain shower head using a disc container as it. In its center, you need to fix a plastic adapter that is attached to the shower hose, and the central axis of the discs must be removed. Use an awl to make holes at the top of the cover. Glue all fasteners well with sealant. Such a nozzle is held on a bracket with a thick wire or on a rigid pipe.

If you have a desire to make a rain shower, then you can use plastic pipes for this.

You need to supply water to them, first make many small holes with a soldering iron, and then enjoy the pouring drops. Children like such water procedures.

But do not forget to first check the water in the container from which it will be poured into the shower, it should warm up in the sun.

And to make a stationary shower, you must first pour water into a tank or a barrel, which will be located under the roof or on the roof of the building. On a warm summer day, the water warms up well here, and you can wash yourself in plenty. To be able to do this even in cooler weather, then it is necessary to provide a heating system in such containers.

Country shower with your own hands

Before installing it, you need to make a shower stall. If possible, you can craft it out of wood by placing this small structure on the base. Add a wooden door or use a shower curtain like this.

There are also simpler options. If you have oilcloth fabric, then use it.

Another option is to purchase an impregnated fabric or use an old awning or tent.

If you made a fence from corrugated board and you still have materials, then try to make a shower for giving out of them. Metal pipes must be dug in according to the markings, filled with concrete. When it dries, cut sheets of corrugated board are welded to the racks. One of them will become a roof.

If you have few wooden planks, then implement the option shown in the next photo on the right. And on the left is a shower, which is made like a wattle fence. So the materials for him will cost almost free.

When the shower is ready, you can install a water container on it. To make it warm better, you can make a kind of coil from metal or from a hose. Then the water will warm up more actively.

These and other homemade products for giving allow you to make the most of the available containers.

To be able to receive warm water even when it is not heated by the sun, use electric heating. To do this, you can position the plastic barrel vertically or horizontally. Then it will be necessary to mount ten on one side, and on the other? water bay fitting. Make an overflow hole so that excess liquid flows out and you can see that the container is already full.

Now it remains to install the tank. Usually a shower roof is used for this. You can put a flat tank here, made of iron or plastic. You can also make a soul canister out of a metal or iron barrel. If you need to heat the water, then a heating element is mounted in the barrel.

Check out other examples of what you can do on your own plot with your own hands.

Interesting homemade products for giving with your own hands

Gardening tools are essential for working on the ground. Often, the store does not sell very high-quality sets. After a short time use, the handle of the shovel breaks off, or the teeth of the hoe are bent. Therefore, if possible, try to make the tools yourself.

Take:

stalk;
a fragment of a water pipe;
trim from a two-handed saw;
screws;
screws;
a fragment of a profile pipe with a cross section of 3 cm.

Using a grinder, cut a piece of pipe. Taking a lever tool, you need to cut out a piece of pipe, unbend the sector, and in the place where the handle will be, you need to work with a hammer to give the future hoe the desired shape.

To make a blade, take a piece of a two-handed saw and sketch out the outlines of the future hoe. Punch two holes.

At the same distance and the same diameter, you need to make 2 holes on the hoe itself, and then cut out a fragment from a two-handed saw.

Drill these holes with a drill and drill designed for metalworking. Connect the two parts with rivets, which are screws.

Now drill a hole in the top of the hoe to attach the handle here.

Make another scoop, which is very interesting to work in the beds. Then such homemade products for giving will allow you to find a very durable set of tools.

Saw off the desired piece of the cutting with a grinder and start unbending part of it with a chisel.

Then, using the lever tools, unbend this part almost completely.

It remains to work with a hammer so that the scoop blade takes the desired shape. Using a felt-tip pen, draw the outlines of its working part and cut it out with a grinder.

Use an abrasive wheel to smooth out the edges of the shovel and make them smoother. Now sand the tool with a flap wheel. This shovel will become so shiny.

Also drill a hole in it for the handle, then insert it and secure with a screw.

Cover the cuttings of both tools with antiseptic and then varnish. Now you can use the tools as intended. If you want, use the same principle to make a ripper for the beds.

It is very exciting to create such things for a summer residence with your own hands. Maybe after you make the tools, you want to make a fixture that can dry some of the harvest. See how one gardener did it.

How to make a dryer for fruits and vegetables?

See what materials you need to take for this:

sheet metal;
square pipes;
locking mechanism;
polycarbonate sheet;
self-tapping screws, screws;
2 door hinges.

But what tools you need to arm yourself with:

grinder;
welding machine;
drill;
clerical knife;
tape measure and marker;
scissors for metal;
hacksaw.

First you need to make the base for the drying cabinet. Make a square tube frame. The horizontal and vertical posts are sawn off so that the edges are straight. And the tips on the connectors should be chamfered.

The door here will be metal. To make it, cut 4 fragments from the iron pipe and weld them into a rectangle. Then you need to sheathe this base with metal using screws with nuts and self-tapping screws. If possible, weld the steel sheet. To make a baking tray holder, attach wooden blocks to the back of the frame. Take self-tapping screws for this. In this case, on each side there are 4 wooden blocks for 4 trays.

An absorber is installed in the dryer. Take sheets of metal and paint it black. Use heat resistant paint. When it's dry, place this blank on the bottom of the dryer.

For the absorber, take a thick sheet of aluminum or copper, or at least steel. These materials conduct heat well.

Now you need to sheathe the outside of the dryer, make the roof transparent, made of polycarbonate. Then the sun's rays will penetrate here well. Glass can also be used. Cover the ventilation windows with a mosquito net to keep insects out.

Attach hinges and a locking mechanism to the door. Reattach the door in place. Look, what a wonderful beautiful and spacious dryer turned out.

It remains to make baking sheets. They must be breathable. First, put together the frames from the bars, and then attach the metal mesh to them.

Now you can cut the fruit and watch your device work. Place a thermometer in the dryer to monitor the temperature. It should be within 50–55 ° С. If the temperature is colder, cover the lower openings with a rag.

In such a homemade dryer, you can dry not only fruits, but also vegetables, spicy herbs, fish, meat, roots.

If this diagram of the device of such a device seemed complicated to you, then you can make a dryer from a metal barrel. A hole for the door is cut out in it, and racks made of metal mesh are inserted inside.

So that water does not flow here and there is better ventilation, such a roof is installed on top.

You can upgrade this fixture by installing a fan and an electric heater inside.

If you want to make your own lawn mower, then this is also possible.

Turn an old washing machine into it, for example, this one.

And if you still have an old bedside table, then you will make a platform out of it for the future almost self-propelled device. But you only need a door from the bedside table.

Drill holes in the center of the motor shaft. Make a cutting knife from an old two-handed saw. It is necessary to saw off from it to the size of the desired shape, cut out a recess inside.

Attach two wooden pickets that will become the handles of the mower. Remember to secure the motor and extension cord to it. Now you can test such an interesting unit.

If you are interested in other homemade products for giving, then it will be useful for you to watch the following video.

A lot of interesting ideas await you in the first video.

And you can get acquainted with cool homemade plastic pipes if you watch the second plot.

Since you have decided to become a self-taught electrician, then surely after a short period of time you will want to make some useful electrical appliance for your home, car or summer cottage with your own hands. At the same time, homemade products can be useful not only in everyday life, but also made for sale, for example,. In fact, the process of assembling simple devices at home is not difficult. You just need to be able to read the diagrams and use the tool for radio amateurs.

As for the first point, before you start making electronic homemade products with your own hands, you need to learn how to read electrical circuits. In this case, ours will be a good helper.

From tools for novice electricians, a soldering iron, a set of screwdrivers, pliers and a multimeter will come in handy. Some popular electrical appliances may even require a welding machine to assemble, but this is a rare case. By the way, in this section of the site we even talked about the same welding machine.

Special attention should be paid to the materials at hand, from which every newbie electrician can make elementary electronic homemade products with his own hands. Most often, old domestic parts are used in the manufacture of simple and useful electrical appliances: transformers, amplifiers, wires, etc. In most cases, for novice radio amateurs and electricians, it is enough to look for all the necessary tools in the garage or shed in the country.

When everything is ready - the tools are assembled, spare parts are found and the minimum knowledge is obtained, you can proceed to the assembly of amateur electronic homemade products at home. This is where our small guide will help you. Each provided instruction includes not only a detailed description of each of the stages of creating electrical appliances, but is also accompanied by photo examples, diagrams, as well as video lessons that clearly show the entire manufacturing process. If you do not understand at some point, then you can clarify it under the entry in the comments. Our experts will try to advise you in a timely manner!