What is the pump performance baby. Pump baby, varieties, segment of use
A convenient submersible pump Kid will help to solve the problem of supplying water to many owners of private farms and dachas that are not connected to the water supply. The Malysh electric pump is not a powerful device for pumping water from artesian wells, but it will quite cope with the tasks of lifting water from wells, small wells, open reservoirs.
The lineup
There are 3 main models produced under the Malysh brand, which differ not only in technical parameters and in the fence system, but also differ in scope.
The standard submersible pump Kid has a bottom water intake. Such units are designed for:
pumping water from remote open reservoirs;
drainage of flooded basements and lower floors;
pumping water to a minimum level.
If the name has a K marking, it means that additional thermal protection is built into the design. That is, there is a thermal relay in the case, which will turn off the device if it overheats. Such equipment can be left unattended for a long time without fear of burning out.
If the name contains the M mark, it means that the housing is made of durable plastic. It is made of aluminum by default. No doubt the aluminum case is more durable, but it costs more.
The design of the Malysh-M and Malysh-3 pumps includes an upper water intake. The Malysh M pump is similar in technical characteristics to the basic modification. The device Malysh-3 has significant differences from it.
Apparatus with the upper suction method are used for the intake of liquids from wells / wells. In these places, units with a bottom water intake may fail if they are not equipped with an additional installed filtration system. Electric pumps with an upper intake during operation do not suck up silt deposits from the bottom, which can clog the system.
Application area
The vibrating pump Baby has gained wide popularity due to its good technical characteristics, inexpensive cost and ease of use. Compact and not heavy (weighing up to 3 and a half kilograms) devices cope with a wide range of tasks.
They are used for:
uninterrupted lifting of water from wells / wells with an inner diameter of 8cm to 11cm and from any water bodies in which the ambient temperature does not exceed 35 degrees;
for pumping liquids from a distance of 100-150m, which is quite enough to provide a small area;
pumping water from the tank to the water supply;
creating a water supply for agricultural or domestic needs;
pumping flood waters from flooded basements;
filling / draining pools.
Gardeners also include these electric pumps in self-irrigation systems to care for garden crops or to spray shrubs using spray nozzles. The Kid's water pump works with liquids in which the amount of mechanical impurities does not exceed 0.01%. For pumping more polluted water, these models are not suitable, as the parts are subject to increased wear, which shortens the service life of the devices.
Construction and connection
Vibration pump Kid consists of a hermetic housing, inside of which there is an electric drive and a vibrator. The inlets of the models are closed by a valve. The operation of the device is based on the power of an alternating current, under the influence of a shock absorber, forcing the armature and piston to oscillate, while simultaneously pushing water into the pipe.
The reason for the popularity that the Baby vibration pump deserves is also the fact that it can be used to create a full-fledged pumping station included in the auto water supply system. To do this, it will be necessary to supplement the design of a pressure switch, a hydraulic accumulator and a check valve. The relay will help maintain the desired liquid level, since it will automatically turn on / off the pump when the water level changes. The pressure of the Kid will be quite enough even for an autonomous water supply in a country house, which allows you to reduce the cost of organizing water supply.
Such a unit is highly reliable, largely due to the proven design. And if a breakdown happens, then this is not a problem at all, because thanks to the widespread availability of spare parts, it is not difficult to repair the Kid pump today.
Mounting
It is very important to connect the kid pump correctly. Its working position should be strictly vertical, without distortions. The baby submersible pump is fixed with a strong nylon cord, for which there are grooves on the body. A load with a spring must be suspended at the bottom of the unit to dampen vibration.
The pump casing is separated from the casing with special elastic cuffs or just a wide ring made of dense rubber. Do not lower the electric pump on the wire, as it will resonate vibration, which will lead to wear of the mount. From the bottom of the bottom to the pump housing, a distance of at least one meter must remain.
Pump Kid Specifications
All modifications of the line operate on a 220V household network. They can submerge up to 3 meters in depth. They are produced in several modifications differing in the length of the power cord, power and pressure.
In wells with low flow rates, deeper sinking is acceptable. The water intake rate for all models is the same - 430 l / h.
Malysh, Malysh-M have a head of 40m - 60m, Malysh-3 - 20m - 25m.
Productivity increases when working without pressure up to 1,500 liters.
Electric pumps also differ in size and power.
The power of the basic modification Malysh and M is 240W.
Dimensions in length - 25.5 cm and weight - 3.4 kg. The Malysh-3 modification has a lower power - 185W, the length of the unit does not exceed 24cm, and its weight is 2kg.
The Malysh and Malysh-M electric pumps can be used to lift liquids from wells with a diameter of more than 100mm from a depth of up to 40m, and the Malysh-3 is designed to work with wells with a diameter of more than 80mm and a depth of up to 20m.
Where to buy a pump Baby
Due to its widespread prevalence, it will not be difficult to buy a baby pump. The price of such a device, depending on the modification, is in the range of 1500 - 3000 rubles.
The baby water pump has the following advantages:
The location of the suction openings at the bottom of the body in electric pumps The Kid allows you to pump out water from the bottom.
The location of the suction openings from above in the Malysh-M, Malysh-3 electric pumps allows the device to be operated without supervision, since the unit will not overheat.
Electric pumps can also be used for pumping clean drinking water.
They are maintenance free.
Long service life.
Video about the pump Kid
To provide water supply to household plots and small farms, household electric pumps are used. Universal pump Baby submersible type can be optimally used in places with little water consumption. The electric pump got its name due to its compact miniature size and light weight. Despite the modest power characteristics, the baby submersible pump provides a fairly good water pressure, depending on the delivery height.
To provide water supply for summer cottages and household plots, as well as small farms, household electric pumps are produced. The universal submersible pump Baby is efficiently used at facilities with low water consumption. The product justifies its name by its compact size and low weight, not exceeding four kilograms. The engine of the unit is capable of operating from a home electrical network, the voltage of which is 220 V. Despite the modest power indicators, the equipment provides a fairly good water pressure, which depends on the height of its supply.
Applications of the submersible pump Kid
Residents of rural areas and summer residents use the Kid's water pump for various purposes, namely:
- provide water to both residential and non-residential buildings;
- supply water to garden and summer cottages;
- include in automatic irrigation systems that facilitate the care of garden crops;
- provide spraying of shrubs and plantings using spray nozzles;
- pump out water.
Important! These models of pumps should not be used for pumping highly contaminated water, as they undergo rapid wear and tear of their structural parts, which leads to a decrease in service life.
This pumping equipment, produced by Russian manufacturers, has become widespread due to its reliability, affordable cost and unpretentious operation. The lack of editing also played a role in this. After all, the pump is ready for operation immediately after immersing its body in water.
Main technical characteristics
- the productivity of the Malysh pump is 432 l / min without raising the water;
- cable length varies from 10 to 40 meters;
- the diameter of the intake pipe must be at least 80 mm;
- water intake, depending on the specific model, can be upper or lower;
- raising the water pressure to a height of 40 meters;
- engine power no more than 250 W.
Important! This pump is capable of pumping and lifting water not only from wells with a diameter of more than 80 mm, but also from open reservoirs and wells.
Installation of a household submersible electric pump Kid
The figure schematically shows how the Malysh submersible pump should be placed: in a well and in a well with a filtration casing.
Installation diagram of a vibrating submersible pump Kid into a well or into a well
Design principle and basic repair
The device of the Malysh pump is based on the properties of electromagnetic oscillations, which are transmitted to the float valve, forcing the membrane to vibrate and thereby push the water. With the help of an automatic device, it is possible to monitor the operation of the engine, which turns off when overheating, as well as after pumping the entire volume of water.
Pump models can vary in suction port locations. or after pumping all the water. It is preferable to purchase a Baby pump with an upper fence, since in this equipment the electric motor is located at the bottom, and therefore it is better cooled. The suction port located at the top does not capture silt deposits and other impurities from the bottom of the water intake. Such equipment can operate without problems in a submerged state for a long time at a water level below the suction openings.
A similar situation will not be tolerated by models with a lower water intake. Therefore, their work must be monitored, not leaving the switched on equipment unattended for a long time. When buying, it is advisable to choose models with thermal protection, which does not allow the engine to overheat. It is possible to repair the Kid's pump with your own hands in the event of replacing leaky valves and other minor breakdowns. It is necessary to resort to the help of specialists in the event that the product has not expired the warranty period, as well as when replacing a burned-out engine.
Submersible pump Kid with upper water intake and thermal protection
Correctly selected power, careful operation and adherence to the recommendations given by the manufacturer allow to prevent damage to the purchased pumping equipment.
Customers who are attentive to the operation of the pump are satisfied with its operation and give the most positive feedback. You can choose a suitable pump model with the help of specialists who will help you install and connect it.
We will send the material to you by e-mail
H and today, domestic manufacturers are in no way inferior in terms of performance indicators to foreign firms. What's more, you can get a similar set of features for much less. Thus, now there is no longer a need to spend huge sums in pursuit of "imported quality", because our equipment has ceased to lag behind foreign ones. For example, you can buy an inexpensive but high-quality pump "Kid", the technical characteristics of which you will find in this article.
This unit is an excellent alternative to foreign manufacturers.
Application area
Due to its versatility, the "Kid" pump can be used for a variety of purposes, including the use of equipment on any subsidiary and farm plots, orchards, and even dachas.
Taking into account the above, it is possible to single out the main tasks to be solved by this device:
- Any irrigation work in fields, gardens and other agricultural areas.
- Filling or pumping water from various artificial reservoirs, for example, swimming pools.
- Taking water from a well or well, and supplying it to the water supply system of the house.
- Pumping water out of the premises in case of emergency situations resulting in flooding.
Thus, we conclude that the Malysh pump, whose technical characteristics we are analyzing, is quite versatile.
The principle of operation of the pump "Kid"
The principle of operation of this device is quite simple: it is based on the phenomenon of electromagnetic waves. When the equipment is connected to the network, a special drive converts electrical energy into electromagnetic oscillations, which are then transmitted to the valve, which acts on the membrane and makes it oscillate at a frequency of about 50 times per second.
Like the base model, this unit is not equipped with any filter, however, this insignificant disadvantage is easy to fix: just buy a regular filter on the plumbing market and install it yourself.
Model "Kid-3"
So, we have analyzed the types of the pump "Kid", the technical characteristics of each model.
Selection criteria for pumps
Carefully read the criteria for choosing a device, because the correct operation of the unit completely depends on the decision made.
So, you have to take into account the following indicators: voltage, performance, power, possible immersion depth and what valve is used to draw water.
The last point should be covered separately. Bottom intake devices are especially effective when used in wells or boreholes, as well as when pumping water from flooded rooms. The disadvantage of using such models is the high probability of getting various kinds of debris into the device case. Thus, the bottom-intake models are an excellent option for pumps for the Malysh well.
Useful advice! When using a model with a lower water intake, do not be too lazy to install a filter for the "Kid" pump - this way you will limit the ingress of small particles and dirt into the device, and significantly extend its service life.
A pump with an upper intake is most often used to ensure the autonomous operation of a water supply, since it has a much better cooling system than its lower intake counterpart.
Useful advice! If the level of water pollution exceeds 0.01%, we recommend installing an upper inlet device. The difference in cost will be small, but you will see the improved one immediately. Thus, using the "Kid" pump with an upper water intake is an excellent solution for dirty water.
We connect the pump: correct installation and operation
Unit installation
In order to minimize the vibration of the device, one end of it is tied with a medical tourniquet, or any other suitable material, and the other is fixed with a special nylon cord. To cushion the device in case of possible impacts against the walls of the tank, put a rubber ring on its body.
The pump must be installed in a vertical position not lower than the dynamic level. Also pay attention to the diameter of the hose: it must exactly match the pump, so that the efficiency of the device will be maximized.
Do not connect the unit to the mains during installation and make sure that the cable connections are located outside the tank.
Article
The kid is produced in Russia by several factories. An inexpensive device is used in households for water supply, as drainage or irrigation. The tool is characterized by easy maintenance, low weight and the lowest cost in the segment.
Scope of application of pumps
The universal pump is used in farms in a variety of ways. Limits the use of the tool only power and head. The Malysh pump is used to pump water mixed with sand or silt, but with a small amount of suspended matter.
Tasks performed with the tool:
- lifting water from a depth of up to 40 meters;
- pumping into containers with a height of less than 4 meters, supply to the water supply;
- watering the site with water intake from an open reservoir;
- drainage buildup of flooded rooms or swimming pools;
- to create pressure when washing cars, outside buildings, paths.
For use in different directions, water intake is provided from below and from above. But for trouble-free operation, any pump must be equipped with a suction filter and automation, protection against engine overheating. Manufacturers of modern models guarantee equipment operation for one and a half years. But on farms you can find a baby pump at the age of 25 years. The first models were more viable. The cost of the pump, depending on the configuration, is 1300-2500 rubles.
For continuous year-round use, a vibration pump can be delivered without calculating the consequences. Despite the rubber gasket, vibration during operation is transmitted to the walls of the casing, destroying it. Over time, a tool worth a thousand will destroy a well, the cost of which is measured in tens of thousands of rubles.
Device, principle of operation and water pumps
Vibrating pump The kid has a working unit with a diaphragm chamber. The membrane is an elastic bridge. The pump is powered from an alternating current with a frequency of 50 Hz. Electromagnetic vibrations with the same frequency affect the core when changing the pole, forcing it to oscillate in the axial direction. In this case, the core is connected to the membrane through the float. An increase in the volume of the water chamber creates a vacuum, water flows. When compressed, it is squeezed out through the valve. Structurally, the water inlet can be from the top or bottom. The location of the intake determines the application of the pump.
The design of the Kid's water pump is simple. But in order for the pump to work for a long time, it is proposed to equip it with automation:
- dry running sensor, which allows you to stop work in case of airing the chamber or clogging it with sand;
- float switch triggered at a given level;
- network voltage stabilizer;
- thermal relay to prevent overheating of the pump housing;
- check valve;
- pressure gauge;
- hydroaccumulator.
The rig will extend the life, but add installation cost. In some models, the necessary equipment is installed, and the richer the equipment, the more expensive the pump.
The vibrating pump Kid has several modifications. The lower water intake is made on the Malysh and Malysh-K series. The pump can be used to pump out tanks with moderately dirty water or be installed in wells and boreholes with an internal section of more than 100 mm.
Lower water intake means that in some cases the engine can run in air and get hotter. Therefore, Malysh-K is equipped with built-in overheating protection. When using these devices, one should take into account the possibility of a large amount of sand entering the chamber into the lower holes with a small layer of liquid. Therefore, the Kid is installed one meter from the lower boundary of the water intake on a suspension. When pumping out of the container, there must be a level control, a float switch will not interfere.
For water wells, it is better to use pumps with an upper water intake, when the engine is at the bottom, it has better working conditions. The suction port takes in clean water that is not turbidized by suction. With the same technical characteristics, the Malysh-M and Malysh-3 pumps have a smaller body in cross section. They can be installed in smaller casing diameters.
Specifications of the Kid pump:
- productivity - 432 l / h;
- head - 4 bars;
- consumed energy - 245 W;
- weight - 3.5 kg;
- outer diameter of the sleeve - 100 mm;
- maximum installation depth - 40 m.
Kid-3 has a weight of 3.2 kg, a cross-section of 76 mm, with a decrease in network energy consumption to 160 W. At the same time, he can raise water from a depth of 20 m.
The Little Stream belongs to the same category as the pump Malysh, a Belarusian manufacturer. The model of the vibrating submersible pump Brook -1 corresponds to the Kid-M, with an upper water intake and protection against overheating. The pump body is slightly more massive, 4 kg, section 98 mm, which allows it to be installed in casing pipes larger than 4 inches.
The trickle-1M has a lower fence, which allows using the tool as a drainage tool for draining pools with clean water. The cost of the Belarusian pump and its quality does not differ from the Russian model.
Completion and operation of pumps Malysh i Rucheyok
When buying a pump, it is necessary to determine in advance where to use the equipment. So, if you need to supply water from the container for irrigation, it is better to buy a Kid pump with a lower fence. Then you can almost completely drain the container. To use water for lifting from the depth, the device is more suitable where the intake is from the top. When installed in a well, the vibration pump must be isolated from the walls with rubber cuffs. They dampen vibration, but make it difficult to lower and raise the structure.
The baby water pump is distinguished by instant start. In the factory complete set, the minimum set includes:
- pump;
- hoses for irrigation and raising water from the horizon;
- inlet filter;
- spare parts, incl. required valve, piston;
- connection cable with a plug for a single-phase network;
- user's manual.
It is better if the product is manufactured in the CIS or in Russia. In a more expensive configuration, a nylon cord for deep mounting is provided. There is a thermal relay, pressure switch, dry run protection. The wider the equipment, the more expensive the device.
Correct installation of the pump is important, the working position must be vertical, without distortion. The pump should be fixed with a strong nylon cord, passing it along the grooves. In this case, a weight with a spring should be suspended below to damp vibration. The pump casing is separated from the casing walls by elastic cuffs.
You should never lower the submersible pump using a wire, it does not extinguish, but resonates vibration. This will wear out the mount and the pump may fall.
Pumps in this category are not intended for continuous operation. Respect for the appliance and repairs can extend the service life. After the end of the warranty period, repairs in the workshop will become irrational. But spare parts are inexpensive, repairs are simple. If the engine is running, the housing is easily disassembled; the installation sequence can be found in the operating instructions.
The universal pump will become an irreplaceable assistant in the country. When leaving, you can take it with you.
High efficiency combined with economy
- simple design, maximum work efficiency
- low price
- ease of launch and further operation.
Where can this brand of pump be used.
Sources of water:
- as a submersible vibration pump for a well, in this case, its diameter, debit should be taken into account (how much water can a well give per hour).
- as a submersible vibration pump for a well, while taking into account its depth, water level.
- any body of water with a sufficient water level.
Water consumers:
- drinking or technical water supply of a small house.
- watering a garden or a personal plot. For home, for a summer residence, for a vegetable garden, for greenhouses, etc.
How to choose a pump "Kid"
In order to navigate the model variety of the "Kids" pumps, we present a number of summary tables reflecting the technical characteristics of various modifications. This will help you to choose and in the future to buy this water pump with the required performance and design features for solving specific water supply problems.
Pressure characteristics
Flow-pressure characteristics are approximately the same for all modifications. From this diagram it follows that the higher the level to which water should be pumped, the lower the pump performance, and vice versa - the lower the lift height, the greater the performance.
Pump "Kid" with lower water intake
Pump Kid with a bottom fence - this is a classic basic model. This household vibration pump is used to lift water from wells and wells. Moreover, their diameter must be at least 100mm. Also, this pumping unit can be used to take water from various open reservoirs, while the water temperature should not exceed 35C. So the water intake for this model is lower, you should monitor its operation, make sure that the water level does not fall below the water intake hole, which can lead to "dry running" and overheating of the pump.
Its features design features:
Lower water intake
Pump Kid. Video.
Pump "Malysh-3" with upper water intake, pump diameter 76mm.
Manufacturer - JSC "HMS Livgidromash", Livny
The household pump "Malysh-3" is used to lift water from wells and wells. Moreover, their diameter must be at least 80 mm. Also, this pump can be used to take water from various reservoirs, the permissible temperature of the pumped ox is 35C. Due to its small diameter, it is convenient for use in narrow wells, however, it can be used to pump water from any source. The upper water intake ensures constant cooling of the pump.
Its features:
Upper water intake
- the cable with the pump is monolithic
- ease of installation, start-up and further operation
- a special filter is used to protect against solid impurities in the water.
Pump "Malysh-K" with lower water intake, with thermal protection
Manufacturer - JSC "HMS Livgidromash", Livny
The household vibration pump "Malysh-K" is used to lift water from wells, wells and other water sources. Moreover, their borehole diameter must be at least 100 mm. The permissible maximum temperature of the pumped-over water is 35C. An important detail - this model is equipped with thermal protection: if the pump overheats, it turns off. However, its mode of operation should be monitored.
Its features:
Lower water intake
- full thermal protection
- the cable with the pump is monolithic
- ease of installation, start-up and further operation
- a special filter is used to protect against solid impurities in the water.
Pumps "Malysh-M" with upper water intake
Manufacturer - JSC "Livgidromash", Livny
The Malysh-M pump is used to pump water from wells, wells, ponds and other water sources. Thanks to the upper inlets, the pump body is constantly in the water, which ensures its cooling during operation.
Its features:
Upper water intake
- the cable with the pump is monolithic
- ease of installation, start-up and further operation
- a special filter is used to protect against solid impurities in the water.
| Name | Power, W | Cord length, m | Head, m | Productivity, l / h | Water intake |
| Pump "Malysh-M" 6m., (Upper water intake) | 240 | 6 | 40 | 950 | upper |
| Pump "Malysh-M" 10m., (Upper water intake) | 240 | 10 | 40 | 950 | upper |
| Pump "Malysh-M" 16m., (Upper water intake) | 240 | 16 | 40 | 950 | upper |
| Pump "Malysh-M" 25m., (Upper water intake) | 240 | 25 | 40 | 950 | upper |
| Pump "Malysh-M" 32m., (Upper water intake) | 240 | 32 | 40 | 950 | upper |
| Pump "Malysh-M" 40m., (Upper water intake) | 240 | 40 | 40 | 950 | upper |
When choosing this brand of vibration pump, you should pay attention to the following technical characteristics:
- pump performance
- pressure
- cable length (it differs for each model)
- pump power
- upper or lower water intake.
Pump manual
What determines the price
The price of the "Malysh" vibration pump will directly depend on the technical characteristics and the length of the cable, which is monolithically connected to the pump. The higher the pump performance or the cable length, the higher its cost.
Recommended as an inexpensive pump for a summer cottage or a small house. It can be used both for technical (watering the site, using water for sanitary needs) water supply, and for drinking. Small dimensions combined with low weight, but at the same time sufficient performance, ease of use - all these factors explain its popularity. Also, an important advantage is the low cost. Sales statistics in the spring and summer period confirm that it is indeed the smallest leader in the vibratory pump market. Positive feedback from numerous buyers confirms this.
Important! To extend its working life, we recommend using a special filter to prevent the ingress of solid impurities.
To prevent the pump from acting on the borehole walls, we recommend to put on special rubber rings on the pump.
How to order and buy
Knowing what parameters a well or a well has, it is not difficult to choose the right model of this pump.
By contacting our specialists, you will receive comprehensive advice and assistance in choosing the right model. We know everything about this pump. In our store you can purchase all modifications of this equipment with the required cable length. Upon purchase, a warranty card is given, after the warranty period, post warranty service is carried out. In addition, a protective filter is always available.
If you need a Malysh pump in Moscow, we can deliver within the city. Pickup from the warehouse is also possible. For buyers from the Moscow region - delivery to the nearest Moscow region.
For buyers from other regions, we can send the goods to your address by any transport company as agreed.
You can buy this equipment by making a purchase directly on this website, or by calling the Contacts section - our manager will take the order and agree on delivery.
