Tva 100 can receive digital TV. T2 how to set frequencies for all channels

So, you have decided to connect and configure digital terrestrial television for your Smart TV device. This, of course, can be done regardless of which TV manufacturer you have - Samsung, LG, Philips or some other. The main thing is that your gadget has a built-in receiver. It is important to note that such a receiver is installed in almost every modern Smart TV. But just in case, you can clarify this either in the instructions or in the store where you purchased the TV (or find information on the Internet).

There is nothing complicated in setting up digital terrestrial television if you follow the instructions carefully

What can you get from the fact that the TV will be able to receive digital terrestrial television? Remember the old TVs, which most often had a screen with a twitching image, on which it was often simply impossible to watch your favorite program - these were analog channels. So, the modern world has overcome this problem with the help of digital TV channels, which have high image and sound quality. Agree, in this case it will be much more pleasant to watch movies, TV shows or the same news. In general, some pluses and no minuses! Therefore, let's move on directly to how to connect digital terrestrial television to a TV.

How to set up digital terrestrial television?

Before we start setting up digital terrestrial television itself, let's figure out the preparation. You will need, first of all, the antenna itself, which you must first purchase or install (if you have your own). You can also design the antenna so that you don't have any cable length problems. And, of course, a TV with support for digital channels. Pay special attention to this, since not all TVs can receive them.

If your answer to these two questions is yes, that is, you have both an antenna and a TV capable of receiving digital channels (it has a special built-in receiver), then you can move on. As for the receiver, read the Smart TV instructions for use carefully. Such information is indicated in it without fail.

Universal method

The method below is not entirely universal, but rather general. That is, the principle of the sequence of actions will converge with others, but some menu items or button names will be different. Therefore, you can try your logical and analytical skills in practice and draw an analogy with your device. If you doubt yourself or do not want to complicate your life, then just find the instructions for your TV below (Samsung, LG and Philips are considered). In any case, let's move on:

1. We connect the antenna to the TV using a special connector.
2. Now we take in hand the TV control panel and click on "Menu". This button is usually the largest and is located in an accessible and visible place.
3. Next, you need to find the options or settings where we need automatic mode for them.
4. If necessary, you can specify the signal source (this is, of course, a cable), and then select digital channels. For each positive choice, click OK or Next.
5. Specify that you need a full channel search. A field for filling in the data may also appear here. In this case, we indicate the following information (note that if there is a network search for channels, then this data does not need to be specified):
   • For the frequency, use a value equal to 314 MHz.
   • For baud rate - 6875 KS / s
   • Well, modulation - 256
6. We press the long-awaited "Start" or "Start" button. It remains to wait for the completion of the process, after which you can enjoy watching TV channels in higher quality, since your TV will be able to receive digital terrestrial television.

Samsung TVs

1. As in the previous instructions, first connect the antenna to your Samsung TV.
2. Use the special button on the remote control to enter the device settings.
3. In the list that appears, we will need a tab with the broadcast (or another name where the antenna icon is drawn), where there is an item "Antenna", in it we need to indicate that the connection is made using a cable.
4. Then open the menu item "Country". Here we will choose "Other".
5. Now you should see a window asking you to enter a special pin-code. The default is 0000 if you haven't changed anything yourself.
6. If the device again requests to indicate the signal source, then without hesitation we choose the cable.
7. Next, we set the following search settings: fast mode, automatic network selection. Do not forget also about filling in this data:
   • For baud rate - 6875 KS / s.
   • Well, modulation is 256.
8. As they often write on the Internet, "turn on the hachiko mode" - and wait for the end of the process. If successful, you should be able to connect digital channels to the TV.

LG TVs

1. It's the turn of LG Smart TV. Just in case, let's repeat our first step - connecting the antenna to the TV.
2. Next, open the device settings using the button on the remote control.
3. We will need to find the parameters of the country where we should select Finland or Germany.
4. The next step is auto search for channels. It can also be found without any problems in the menu tab with a drawn antenna.
5. Next, we will need to indicate what kind of connection we have. As you know, this is a cable. Therefore, here the choice is obvious and you shouldn't think for a long time.
6. We get into special settings, where we indicate the data already familiar to us (if you have read the previous paragraphs). If not, then look:
   • Apply 314 MHz for the frequency.
   • Transfer rate - 6875 KS / s.
   • Modulation - 256.
7. We are waiting for the end of the search for digital channels. If everything went well, then you can please yourself by watching some program in digital quality.

It is worth mentioning immediately about the automatic channel update on LG TVs. Not all models have this feature. If there is such a thing, then you do not need to search again - the TV will do everything for you. This setting is adjustable so it can be disabled in the parameters if desired.

Philips TVs

As mentioned above, the method is practically no different from the previous ones, except for the names of menu items and some tabs. Let's get started:

1. Connect the antenna to the TV and go to the “Installation” tab of the configuration menu using the remote control.
2. You will see a list with parameters. We need the item "Channel setup".
3. Next, we enter the automatic installation, where the system will notify about the update of the channel list. We are not scared, but click the "Start" button.
4. Now you have to click on Reinstall Channels and then select Germany or Finland as your country.
5. After the performed manipulations, you will need to set the connection type - "Cable".
6. It's time to set some parameters using the "Settings" item. Here the speed should be 314.
7. And now, after numerous manipulations with the settings and the search for the desired menu items, we have reached the finish line: click on "Start" and wait for the process to complete. Upon its completion, your fruitful work is declared finished.

How to decode channels?

First of all, please note that if you have tuned digital channels according to the above method, then you should not have encrypted channels at all. This problem arises when you have cable TV (for example, NTV Plus or Tricolor TV). There you set a special price for watching channels for a certain period of time. When the subscription period ends, your access to these digital channels is blocked. Then you should pay for the services and re-configure the receiver. If you do not know how to do this, you can contact the specialists of your specific receiver by phone number or through their website. You can also try to find instructions on the same official website, which describes in detail the entire procedure for resuming viewing.

Summarizing

Digital terrestrial television has a higher display quality than analogue channels. It is very easy to connect and configure this function on any TV - you do not need to have any special knowledge for this. Let's summarize our instructions in one common for most TVs:

1. We connect the antenna.
2. In the settings menu, we find the autosearch of channels.
3. Then we set up the connection type "Cable" and, if necessary, set the parameters in the data area (baud rate, frequency and modulation).
4. Also, as needed, you need to choose a country - most often it is Germany or Finland.
5. We start searching for channels using the start button in the dialog box.
6. We are waiting for the completion of the search and proceed to the long-awaited viewing!

So, if you are interested in the topic of digital terrestrial television, then most likely you want to know what channels you will receive if you connect it yourself. I'm right? Then read on) maybe you don't need it?

What are digital TV multiplexes

Today in Russia in dVB T2 format broadcast 20 channels... They are divided into two packages, these are the so-called multiplexes... Both packages are free to watch, there is no subscription fee. You just need to have a TV that accepts a DVB T2 signal and.

This is what digital is broadcasting in Russia

First ten channels (First multiplex)

The first package, or the first multiplex, is general information, news and development channels (boring things). Here is a list of digital TV channels of the first multiplex:

• First channel
• Russia 1
• Russia 2 Match TV - channel with sports broadcasts
• Fifth channel
• Russia "Culture"
• Russia 24
• Carousel - children's channel, cartoons, programs for children
• OTR - Public Television of Russia

The first multiplex works wherever digital television is available.

It was not in vain that I wrote the publication time of the article. The fact is that sometimes the composition of the channels changes, based on a competition held by the state every year. So in 2016, things could change.

Just recently, the second multiplex was replaced and "Sport +" was replaced by the entertainment channel "Friday" ... Also, the channel "Russia - 2" in the first multiplex was replaced by Match TV.

Third channel package (Third multiplex)

And yet, they promise a third multiplex, but it will already be with a monthly fee. So I don't think he will be wildly popular. Since, as soon as the on-air "digital" becomes paid, it will be easier to stretch a cable with 40+ channels for 120 rubles. per month.

And here is what they write about the project about this:

It is still too early to speak about the exact date of the start of broadcasting of the third (regional) multiplex. To begin with, the principles of forming a regional multiplex at the government level should be determined, after which competitions will be organized to determine the channels participating in the third multiplex. Only after the composition of the third digital package becomes known, RTRS will be able to start broadcasting it. Note that this fall, the Government Commission for the Development of Television and Radio Broadcasting postponed consideration of the issue of the principles of forming the third multiplex until 2018.

In this article we will show you how to properly connect digital television to your TV. Here we will only talk about connecting terrestrial and cable TV (setting up satellite broadcasting is beyond the scope of this material).

Attention! All cable connections described below should be made with the power supply disconnected to prevent damage to them.

How to connect digital terrestrial television to a TV

Many modern Smart TVs have a built-in receiver for decoding digital signals. For example, a line in the characteristics of a DVB-T / C / S TV indicates that this TV model supports receiving terrestrial, cable and satellite digital television without an additional set-top box. At the same time, some standards are already outdated, so a TV with a built-in DVB-T module will not be able to receive digital channels of the current DVB-T2 standard.

What is needed to connect digital television

• Antenna of the decimeter wavelength range (UHF) or a universal all-wave antenna designed for different ranges.
• Digital tuner (receiver) DVB-T2 or TV with a built-in module of the same standard.
• Connecting cables.

Separately, it should be said about the broadband Polish antenna, the so-called "grid" or "Pole". If you want to use it to receive digital television, you will need a little modification, namely, replacing the standard amplifier with a balun. This will cut off the unnecessary range and tune it exclusively to decimeter waves. Or buy a "Polish" with an already installed symmetrizer.

Since not all TVs have a built-in tuner, we will consider a connection diagram using a digital set-top box... This instruction will be more universal and will work in most cases.

1. Connect the RF antenna cable to the antenna input of the digital set-top box marked with the letters IN or IN.

2. To connect the set-top box to your TV, we recommend using HDMI. This interface is specially designed for digital signal and provides the highest picture quality.

To connect a digital TV box to the old TV you can use either the AV connectors for an RCA (cinch) cable or a coaxial connector. There are no other options for older TVs.

3. How to tune digital TV channels on your TV

Connecting a TV with a built-in digital tuner follows a simplified diagram:

1. Connect the RF antenna cable directly to the antenna input of the TV.
2. Activate the digital tuner in the TV menu.
3. Perform automatic tuning of digital channels.

How to connect digital cable TV

To connect this type of TV, you need a digital cable or universal (hybrid) receiver. Unlike the usual terrestrial one, it is equipped with a special PCMCIA slot for a CAM module with an access card, which allows you to unlock a paid package of channels purchased from a cable TV operator.

Many modern Smart TVs with a built-in digital receiver already have a PCMCIA slot, so no additional equipment is required in this case.

You can also use a special card reader to read CAM modules, but due to the large selection of hybrid digital receivers, these devices are used less and less.

Otherwise, to connect a digital TV set-top box to a TV and set up digital TV channels, follow the instructions described above, since almost all receiver connectors are identical. Unless in this case, instead of an RF antenna cable, the provider's cable is connected to the input of a digital set-top box or TV.

How to connect two or more TVs to a digital set-top box

Ideally, one digital receiver means connecting one TV to it, so the optimal, although not the cheapest option, would be to purchase a separate receiver for each TV. In this case, the RF antenna cable is connected to a splitter (splitter) with two or more outputs, and then the signal goes separately to each receiver. The diagram of such a connection is shown in the figure:

You can also simply connect two TVs to one digital set-top box (receiver) using free connectors. For example, HDMI is for one, and tulips are for the other. It should be remembered that in this case, the same decoded signal will be received on both TVs. Therefore, the image on the screens will be synchronous. In addition, you will need long cables to space the TVs to different rooms.

Another way is to use an RF modulator, which, through a divider, will supply a separate decoded signal to each TV. But often the cost of such a device is several times higher than the price of a conventional digital terrestrial tuner.

Frequent connection problems

Users of our Internet provider have the opportunity to connect digital television without a set-top box and thus save on purchasing or renting a receiver. At the same time, the signal quality obtained with a direct connection is identical to that received by users connected via the TV-2 module.

To get access to the whole variety of TV channels available to viewers, you will need:

• tV with built-in Smart TV or Internet TV functions;
• broadband high-speed Internet access and a modern router that distributes Wi-Fi without reducing the speed;
• if the small diagonal does not bother you, an alternative can be your tablet PC or smartphone running iOS or Android operating systems;
• register after downloading the Wifire TV application and select the channel package you are most interested in.

To start using digital TV without a set-top box, you need to download the Wifire TV app for Smart TV, iOS or Android. Registration of a new user is as simple as possible, taking into account the requirements for providing authorized access and secure storage of your personal information. Access to viewing channels is provided in packages supplied at various prices, with the possibility of expanding the basic channels with additional ones. This allows each user to customize the required number of programs with their preferred content without unnecessary spending.

Benefits of connecting digital TV without a set-top box

The main advantage of our proposed connection method is that there is no need for a prefix. Thus, you save about 2 thousand rubles one-time or reduce the monthly fee for the cost of renting the device.

Other important advantages of connecting a TV without a set-top box:

• simple intuitive interface with the ability to record broadcasts, stop and rewind them;
• flexible configuration of available channels with the ability to expand the standard offer with thematic packs;
• convenient viewing control with a single remote control.

The app is available for most modern LG and Samsung TVs. Due to the use of wireless technology for connecting the Internet, the clutter of your apartment with wires is reduced.

Frequently asked Questions

What internet speed does digital TV require without a set-top box?
To correctly answer this question, it is necessary to take into account a number of additional factors:

• the number of users and devices connected to one access point;
• the criticality of the drop in access speed for any connected device;
• features of the router used.

The more devices and the more critical the drop in speed for each, the more high-speed Internet will be needed. For a small family using Wifire TV on a TV, the minimum recommended rate is Wifire 100 at the appropriate speed.

What diagonal of the device display is required for comfortable viewing?
It depends on your personal preference. In our opinion, in order to enjoy watching TV with Wifire TV, you need a device with a diagonal of 7-7.5 inches or larger. However, no one bothers you to launch it from smartphones with a smaller diagonal and enjoy high-quality content while watching your favorite channels.

Is there a situation when connecting via a set-top box is preferable?
If your TV does not support Smart TV technology, connecting via a set-top box is the only option that exists at the moment. We recommend that you carefully study the capabilities of TVs before purchasing them, first of all paying attention to the availability of technologies recognized as the most promising.

The tariffs and services of Net By Net Holding LLC can be changed by the operator. Full up-to-date information about tariffs and services - in the "tariffs" section or by phone indicated on the website.