Enable wireless communication on the laptop function keys. How to enable wi fi on a laptop without hot keys

Modern technologies make everyday life much easier and more convenient. Wi-Fi wireless communication is a bright example. The fact is that in our time there is no need to connect the Internet cable to the computer and work, sitting in one place. WiFi allows you to freely move around the apartment or house without losing touch. Moreover, this technology allows you to create private groups, combining several computers into one network, for data transmission. Everyone knows this technology, and successfully uses it, but not everyone knows how to enable Wi-Fi on the Windows 7 laptop. This is what will be discussed in this article.

What is a Wi-Fi adapter

Before switching directly to the system settings on a laptop, you should determine what Wi-Fi adapter is (or as it is also called - the wireless communication module). To do this, you need to know what WiFi is. As you already know, this wireless technology is characterized by a high data transfer rate, which is not inferior to the cable connection.

Radio waves are used to transfer information. It is in order to receive and send signals to radio waves in a laptop you need Wi-Fi module. It performs the function of the transmitter and receiver in one "face". As you already guessed, this module consumes electricity, which is why, to save battery charges in a laptop, manufacturers have the ability to enable and turn off the adapter. So we got to the essence of the topic. Then we will look at how to enable WiFi module on a computer with Windows 7.

How easy and easy to configure Wi-Fi adapter: video

How to enable wireless module

First of all, it is worth noting that for this, a special button is provided on a laptop, which shows the corresponding icon. To use it, it is necessary to press the "Fn" button and, without releasing it, click the Wireless Adapter Enable button.

All elementary simply. However, in some cases such a button may not be. In addition, you must install the drivers for the operation of the optional keys - Special Software. Also, the driver must be installed on the Wi-Fi module itself. How to do it? Everything is simple.

As a rule, in a set with a laptop there is a disk with all the necessary programs for Windows 7, including with drivers. If there is no such disk, do not hurry to get upset because everything you need to easily and quickly download on the official website of the device manufacturer. The main thing is to know the computer model and the name of the adapter.

The model is usually indicated on the laptop itself - on the lid, at the bottom of the screen or under the keyboard. The name of the adapter can be found as follows. In the Start menu, you should find "My Computer" and click on it with the right button. In the window that appears, select "Properties".

WiFi connection in Windows 7: Video

After that, you must go to the Device Manager item. In the window that appears, you must find the "Network Adapters" item in which you will see Wireless Network Adapter. This is your Wi-Fi module. Here it can be enabled or disabled if necessary.

It is worth noting that there are several ways to enable Wi-Fi module on a laptop with Windows 7:

• With a special button - you already know how to do it;
• Through the task manager as described above;
• Using the network environment setting on the computer in Windows 7.

The first two ways you already know. So let's look at how to enable Wi-Fi communication on a computer with Windows 7 using a network environment setting.

How to enable the wireless communication module in the settings of the network environment

To do this, in the Start menu and start the control panel. Next, in the menu that appears, select "Network and Internet", after which go to the network management center and shared access.

Here on the left in the column it is necessary to find the item "Changing the parameters of the adapter". In the window that appears, you will see various labels, we are interested in the "wireless network connection".

If this gray label, the module is disabled. To enable it, you must click on the label right mouse button and click "Enable" in the menu. If after that the computer still does not start searching for available connections, then you should resort to the first way to turn on the wireless communication. If everything is done correctly, the laptop will start searching for available wireless networks and suggest a list of connections from which you select the desired network and click "Connect".

Often, users who purchased a laptop or netbook are faced with difficulties when you turn on and configure WiFi. The procedure itself is pretty simple, but in some cases there are a variety of catch and unforeseen difficulties, it is also sometimes necessary Set up router Before you begin to connect Wi-Fi to the laptop. In this article, we will look at both a staff connection and solutions to such problems.

How to enable wifi on a laptop

Usually, to turn on WiFi, it is enough to produce 2-3 uncomplicated operations. What exactly depends on the model and manufacturer of the laptop. Here are the options for inclusion of the WiFi network on the beeches of the most popular manufacturers:

• On the ASUS laptop, you need to press the FN and F2 buttons.


• At Acer and Packard Bell, hold the Fn button and parallel to press F3.


• On HP laptops, Wi-Fi is included with the touch button with the symbolic image of the antenna, and on some models - the combination of the Fn and F12 keys. There are also such models on which the usual button with a pattern-antenna is provided for this purpose.


• To enable Wi-Fi on Lenovo, hold Fn and press F5. There are models where there is a special connection switch for wireless networks.


• On laptops from Samsung to enable Wi-Fi, you need to hold the Fn button, click either F9 or F12, depending on the model.

To connect Wi-Fi on laptops of various models and different manufacturers, your original key combination can be used. A detailed description for a specific model must be sought in the user manual, which is attached to the laptop. The FN button is almost on all models of modern laptops. With it, it is connected to various functions and a beech connection with other devices. If there is no Fn button on the laptop, it means that a special button or switch is used to turn on the wireless network. As a rule, it is indicated by one of these drawings.

If not found on the keyboard, explore the ends of the laptop, the switch is possible on the side. And also carefully inspect the bottom of your laptop. There are models that the switch is located on the bottom cover. Moreover, manufacturers make this button barely noticeable. It is practically merged with the case, and it can not be seen at first glance. She may have a signature of Wireles or WLAN. Included WiFi by a button with a button or combination, and it does not work? You should configure Wi-Fi on a laptop.

An example of a hidden WiFi switch

.

Attention: It is worth saying that such switches can be in the most unexpected places, even on the back cover of the laptop. So if your WiFi does not work, carefully inspect the laptop on the subject of whom the switch.

How to configure WiFi on Windows 7 laptop

Before configuring you need to check the availability and connection of drivers. Check drivers The driver check is to find out if they are at all on your device and whether it is involved at the moment. So, B. Control panels Select item Device Managerwhich can hide inside item Equipment and sound.

The window opens in which we find Network adapters. Two items must be present: Ethernet and Wi-Fi. In the title of one of them there should be the word "Wireless" is your adapter.

If the Wi-Fi adapter record is missing, or in front of it stands the icon with an exclamation mark on a yellow background, it means that you have a problem with drivers. If there is no record, it means that the drivers are not installed and you will have to install them from the disk that came with a laptop. Or find on the manufacturer's website. Without them, Wi-Fi will not work. If there is a record, but in front of it is a yellow exclamation icon, click on this item right-click. In the window that appears, select "Enable". The reason for the occurrence of compounds may waged in the adapter the electricity saving mode is set. To disable it, click on it right-click, then properties - power control, now you need to remove the checkbox from the item "Allow the shutdown of this device to save energy".

Now the driver is all right. Enable adapterwi- fi . For this through Control Panel → Network and internet go to Network connections. Here are found Wireless network connection. This is the Wi-Fi adapter. Open the dialog box and select "Enable". Connect to access point. It remains to connect the laptop to the access point. Make sure the access point is active. Find the Wi-Fi icon in the right-right right corner of the screen on the taskbar. When you click, the Network Management window will open, select the desired network, click "Connect".

If the network is password protected, the system will ask you to enter (if you forget the password from your network then you can find it in several ways). Only after entering the required password you can use the Internet. If the network is open, the connection will automatically. That's all. Turning on and tincture WiFi on a laptop completed. If you once configured Wi-Fi, it does not need it anymore, as they will automatically be saved in the laptop memory. It will only be necessary to include it with an appropriate button or key combination. Remember that the connection over a wireless network takes a lot of energy from your device, so the battery charge will be used quite intensively. Pleasant and simple connections without adventure!

24.03.2015

The Wi-Fi feature is the most important element of laptops that is very popular today. Laptop without WiFi is like gas-industrial without gas.

Usually, when buying a new laptop, the WiFi function is disabled by default, or you have to manually configure WiFi settings.

The setting is carried out on different operating systems in its own way. There are also external settings that differ in the laptop models (enabled using the keys).

In this article, I will tell you how to enable WiFi on different laptops and how to make internal settings.

First of all, you need to configure the router and check whether WiFi is on on the router itself. Enable Disable WiFi on the router in two ways:

1. On the back of the router there is a WiFi button to turn on and off.

2. Turns on and turns off WiFi in the internal settings of the router.

We produce an external inspection of a laptop if you see an antenna icon that glows it to mean that Wi-Fi is on, if it does not shine, it is turned off.

If you see the "x" sign panel on the bottom of the Wi-Fi sign, it means that the network is disabled.

Almost for all laptop models there is a WIFI network switch or built-in software that includes and disables WiFi. Laptop with Wi-Fi mechanical switches.

How to enable and WiFi on different laptop models

NR laptop:

HP Connection Manager program.

To open the program go to "Start" - "All Programs" - "HP Connection Manager". We open this program before with the device, press the power button. We look at the picture

ASUS laptop:

At the ASUS laptops, the Wi-Fi is turned on using a mechanical switch (on or off button).

In this case, the Wi-Fi management becomes convenient, but if the switch fails, there will be some problems.

Also, the Wi-Fi control is performed using the FN + F12 keys combination on the keyboard, hold the Fn key and press F12

Laptop Acer:

But some Acer laptop models have no button on the case to enable and disable Wi-Fi. Therefore, the FN + F12 keyboard is used to control the Wi-Fi connection. You must press Fn and not releasing Press F12.

Lenovo laptop:

To enable Wi-Fi on Lenovo laptops, the Fn + F5 keys are used. Press the FN key and not releasing Press F5. After executing such actions on a laptop should light up the Wi-Fi indicator

SAMSUNG laptop:

To connect the Wi-Fi wireless network laptop, press the Fn + F9 combination on the keyboard. Close Fn without releasing Press F9. Like all cases, the indicator on the laptop will light up when successfully connecting the network.

TOSHIBA laptop:

To activate Wi-Fi on Toshiba laptops, the Fn + F8 key combination is used. Again, clamp the Fn key while holding down Press F8.

Internal WiFi Setup on Laptop

These settings depends on the operating system that is configured in its own way. Mostly all settings are associated with Wi-Fi is sleeping mode. They need to include them manually. Consider the settings on each Windows operating system. Before you start settings, check the following parameter.

On the bottom panel on the desktop we are looking for a battery charging sign. Click on this sign right mouse button Choose the "Windows Mobility Center".

The Wireless Web section opened in the window is making sure that it is included.

How to enable WiFi on a laptop with Windows 7 operating system

We open the "Start" go "Control Panel" Select "Network and Internet". The "Network and Common Access Control Center" opened window. Next on the left side of the window go to the "Changing Adapter Settings" section.

After we will open the wireless networks. Click on the right mouse button on the "Wireless Network Connection", select "Enable",

if the network is turned on, we leave everything as it is. If the data section is enabled, the window that opens will be available available WiFi points.

By choosing the desired network and click Connect. If you specify the password when configuring the WiFi on the router, then when you connect to the laptop network, you will require that password from you, we enter the password and click OK.

How to enable WiFi on a laptop with Windows Vista operating system

In order to configure WiFi on Windows Vista, you need to perform similar steps on Windows 7.

We go to the "Start" and open the "Control Panel". On the left side, click "Switch to the classical mind."

Now you need to select the "Network Management Center and Shared Access". The left side of the window click "Network Connection Management".

Now go to "network and connections" management by clicking the right mouse button on the "wireless network connection" and click "Connect".

After performing such actions, the WiFi Connection list opens. Select the desired connections click Connect If you need to enter the password click OK.

How to enable WiFi on a laptop with Windows XP operating system

For a laptop to have the ability to connect to WiFi network on the Windows XP operating system, you must perform the following steps.

Click "Start" open the "Control Panel" go "Network Connections". Right-click on the "Wireless Network Connection" section.

We press the "Connection" button right-click "View available wireless networks". A window will open in this window click on "Change the order of network preference".

Next, click on the "Network and Access Point" click on the Automatic Connection to the Network. Now go to the "View available wireless networks" section, choose the network you need and click "Connect". If everything is done correctly in the taskbar in the bottom corner, a message will appear that a completely successful connection to WiFi.

If, when applying the above settings, it was not possible to enable a WiFi laptop, then you need to check the following parameters.

Installing WiFi Adapter Driver on Laptop

In order to check whether the WiFi adapter driver needs to go to the "Start" control panel "System and Security" and click "System". Next, go to the left part of the Device Manager window.

Opened in the window Go to the Network Adapters section. If you have a yellow triangle with an exclamation mark like in the picture

This means that the driver does not work, to correct this situation, click on the non-working driver The right mouse button select "Update Driver".

The window that opens, select "Automatic Update", if you have the Internet. Or go to the official website of the manufacturer of your laptop, in the Drivers section download the desired driver.

In practice, such cases are observed when the Wi-Fi adapter is disabled. In this case, click on the adapter the right mouse button and click "Enter".

There are such cases when the adapter is under the filter energy savings. To check if the adapter is under this filter go to the "System" System "System" "System" "System" "System" system Next, press the right mouse button itself, click "Properties" Opened in the window Going "Power Management"

In this window, remove the checkbox "Allow the shutdown of this device to save energy."

On this question how to enable WiFi on a laptop is resolved. I hope the information was useful for you. If you questions write comments.

We understand how to enable WiFi on a laptop

Hello, friends. In this article we will analyze the question of how to enable WiFi on a laptop. A rather frequent situation when it seems to have friends and acquaintances everything works, and you do not.

We highly recommend paying attention to the article about cleaning in Minsk laptops. It is from the timely cleaning of the beech from dust, how long he will work without breakdowns.

Introduction

To begin with, it is worth saying that to enable WiFi, you must install the driver on it. Perhaps it is installed (can be present in advance in the operating system), and possibly not. If it is absent, then turn on WiFi on a laptop in most cases will not work.

We do not check if the driver is not missing

In order to make sure whether the driver is installed in such a way in Windows 7: right-click on the "My Computer" icon, choose properties there. This window appears:

In it, we find the "Device Manager" string. There are information about the main laptop or computer devices, including whether you can define whether the drivers are installed or not. We are interested in network adapters. There must be a network card and a Wi-Fi adapter, part of which is usually written as Wireless.

In this tab of network devices, there should be no exclamation marks, they mean that the driver is not installed. If you checked and no deviations found, you click on Wireless twice, that is, a Wi-Fi adapter.

There you can see the device is involved or not. If it is written, inclusive, then everything is fine, we dealt with the technical part. Then it will be left to enable it on the beech itself.

Keyboard shortcuts to turn on Wi-Fi

• And so, the company ASUS in order to enable WiFi on a laptop, you need to hold the Fn and F2 keys.
• On MSI models, this is done with the Fn + F10 buttons.
• On instances of Acer and Packard Bell, you need to clamp the Fn + F3 keys.
• On HP models, we use the touch button with an antenna image, and a combination of the Fn + F12 buttons is possible.
• On the beech of the firm of Lenovo, it is connected by pressing the Fn + F5 keys. There may also be a situation as in the IDEA Pad Z570 model where you need to switch from the right side a special switch.
• SAMSUNG boots include Fn + F9 or Fn + F12.

Also, in rare cases, the FN button may be missing, it means that WiFi is turned on on a laptop with one of the button. It needs to be found. It usually looks like this, although some manufacturers can place it in other places of the case:

If I did not find anything similar to these badges, then it is worth considering the entire beech body and it is possible to detect a switch with an inscription Wireless or WLAN. Plus, with a successful finding it, after pressing, if you look at, the light bulb is to light up, such as, for example, which shows the beech charging.

But it is not a fact that such an indicator will be. After you have enabled the adapter, then in the taskbar on the right below near the clock where network connections are located, the icon should be changed.

You will be left to choose it, you will find a list of available WiFi networks. Select the desired and connect to it. If you have problems with this, then we advise you to refer to the article, how to connect Wi-Fi on a laptop.

On this, we all disassembled the situation with you, how to enable WiFi on a laptop. Perhaps it will not work, due to the fact that the beech is different and the universal method. But you will be well informed how the process occurs, this in any case will bring you closer to the target. Finally, if not difficult, then please leave a comment on the article, thank you.

"Sit today in a cafe and could not connect to Wi-Fi. Employees said that they are fine. What could be the case? What do you need to click? "

Thanks in advance, Alina Kireeva

If you have a laptop, you will probably want to use it to access the Internet. To take advantage of this opportunity, you first need to enable Wi-Fi on the laptop. Let's see what needs to be done so that your laptop see all available wireless networks and might connect to them.

Enable Wi-Fi through switch and hotkeys

If the wireless connection icon is missing or indicates that there is no available networks, although you probably know that you are in the Wi-Fi signal reception area, then:

Different laptop models have a combination of keys to control the adapter may differ. For example, the Laptopes ASUS Wi-Fi turns on the combination of Fn + F2, and Hp is Fn + F12.

By the way, on some laptop models there are special utilities to enable Wi-Fi adapter. They can be called differently: "Wi-Fi Manager", "Wi + Fi Assistant", etc. Without launching these programs, the adapter will not work, whatever you do, so be sure to make sure they are included.

Connect Wi-Fi through the operating system

If the adapter is physically turned on, but the available networks do not appear, then check the status of the wireless connection - it may be inactive.

After that, check again whether the networks appeared to which you can connect if yes, then click at the desired access point, enter the password and install the connection.

Using device dispatcher

If the listed methods do not help (for example, no wireless connection), then try to enable Wi-Fi using the device manager.

1. Click on the "Computer" icon right-click.
2. Run the management tool.
3. Find the Device Manager on the left menu.
4. Open the "Network Adapters" section.

Find your Wi-Fi adapter. If it is marked down, it needs to be turned on. Click on the equipment right-click and select "Enable". Sometimes an exclamation mark is displayed next to the device - this is a message that the drivers are installed incorrectly.

To correct the error, go to the Laptop Manufacturer site and on the Support or Service page, find and download current drivers for the Wi-Fi adapter of your laptop.