DIY wooden mousetrap. Electric Mousetrap

Almost everyone is familiar with the situation when a mouse starts to scratch in the attic or in the basement. Despite the fact that it is a pest, many have some pity for the tiny creatures and do not want to kill or hurt them. Of course, if we are talking about an attack by a whole flock on a barn with food, then there is no place for compassion. But in order to catch a single mouse, a humane mousetrap is perfect.

Catching methods

In fact, there are quite a few of them. It is worth going to a nearby hardware store and you will be offered a choice of several tools with which you can get rid of annoying rodents.

Live trap is a kind of humane mousetrap that does not harm the rodent. You can purchase it or make it yourself. A reasonable question arises, what to do then with the captured creature.
Special glue for rodents.
Ready-made glue traps.
Poisons. Of course, the poison works flawlessly. Another thing is where the rodent will die and how to find its little body, which will exude not the most pleasant smell.
Cat. Not always a reliable way, because some pets tend to quickly leave the place where they saw the mouse.

Adhesive substrates are the worst. The rodent will be alive, but its fur and thin skin on its legs will stick tightly into the composition. Therefore, if you are looking for a humane mousetrap, then this is clearly not your option.

We do it ourselves

If you are in the country and there is no store nearby, then you can make a device for catching a rodent with almost your bare hands. A humane mousetrap from a plastic bottle will serve you faithfully. Any bottle of mineral water or juice is suitable for this.

Moreover, you don't need anything else to succeed. Open the lid and gently pour in a few tablespoons of vegetable oil. Lay out the bait, which is suitable for roasted seeds. The smell will attract rodents. This is a humane mousetrap, since, apart from slight bewilderment, it will not cause any concern to rodents. Place the bottle at an angle. It is very convenient to record it with books. You can lay out several pieces as steps along which the mouse will climb into the bottle. Be sure to fix the edges with tape so that the bottle does not tip over. Otherwise, the mouse will just run away.

Operating principle

A humane mousetrap of this design is best placed on steps or shelves. In such places, mice are caught very quickly. The mouse is taken into the bottle for the smell of the fragrant filling. And vegetable oil does not allow her to get out. For the same purpose, you can use a glass bottle, for example, a beer bottle.

In this way, you can catch not one, but several rodents at once in one bottle. If one mouse is caught, then you can free it and return the trap to its original place again.

We catch the mouse with a can

This is another simple do-it-yourself mousetrap in minutes. You only need a liter jar, a 5 kopeck coin, a small bait and a piece of cardboard. On a flat surface you need to put cardboard, on top of the bait and a jar turned upside down.

On one side, place a coin under the edge of the can. Choose a lure slightly larger than a coin. The mouse will climb inside and drag the bait, thereby moving the coin. The trap will close and you can do whatever you have planned with the mouse.

The disadvantage of this method

We've covered how to catch a mouse in a jar. But this method has one drawback. If the rodent decides to eat the treat on the spot, then it can calmly leave the trap. Therefore, it can be slightly improved. To do this, it is recommended to attach the bait with tape at a height of 3 cm from the neck. The rodent rests on the wall of the can to reach it. It is at this moment that the trap closes. In this case, he will surely remain inside.

Plastic container

Today we are considering the most effective ways to catch a mouse. Not all of them can be considered humane, but after all, no one called rodents into your house. It is convenient to catch mice with a plastic bucket. To do this, you need to make holes in the container and insert a knitting needle into them. You must first put a plastic bottle on it. It should spin freely and quickly. The bottle should be coated with a beaten egg or porridge. We bring a plate to the container, which will serve as a bridge. When the rodent climbs onto the bottle, it starts spinning and it falls into the bucket. It can be filled with water, then you don't have to think about what to do with the mouse.

The simplest design

Even a schoolboy can collect it. To do this, you need to build a box with an open top and without one wall from glue and cardboard. We make a hole for a pencil in the side walls. Now we need a bottle with holes. A bait is laid at the bottom, after which the bottle is fixed in the box. When the rodent gets close to the cherished pieces, the bottle is outweighed - and the exit is cut off. Now the little creature is entirely in your power.

Tin can trap

You will need a regular can of tomato paste or condensed milk. In any of its walls, you need to make a hole the size of a coin. In this case, the teeth should look outward. The rodent freely penetrates the jar, but the cloves prevent it from getting back. It remains to pour the bait, and the mousetrap is ready. Place such homemade structures around the perimeter of your basement or attic space, and remember to check them regularly.

Mouse repellents

All of these methods are good for dealing with single members of the rodent family. But what if they are constantly raiding your home? How to get rid of mice in the house forever? Today, a large number of ultrasonic devices are offered to your attention, which are very helpful in the fight against gray invaders. These devices do not cause them any harm, that is, they can also be attributed to humane methods of rodent control.

The effect is obvious, annoying rodents simply bypass your home. Exposure to certain wavelengths causes panic in mice. Sometimes it even leads to a loss of orientation in space. As a result, they will rush about aimlessly and forget about looking for food.

When choosing a mouse repeller, you need to pay attention to the following points:

A high-quality device in a private house has the function "Adjust the frequency of ultrasound". More advanced models then automatically adjust the ultrasound. This prevents the rodents from getting used to it.
Don't expect one device to protect a large home. Sound waves cannot penetrate upholstered furniture and blackout curtains. Therefore, if one device is enough for a small apartment, then a house will need at least two, and maybe three.
Be sure to check the technical specifications of the purchased device. Some models have a specific range that guarantees their smooth operation. For example, if you decide to place a repeller in a cellar, it may not be suitable for low temperatures.
Don't skimp on the device. Cheap models may have a limited lifespan. In addition, they can malfunction.

What to remember

To prevent rodents from visiting your home, you need not only to invent mousetraps, but also to prevent them from appearing in your home. Unsanitary conditions in the home should not be allowed. Close the trash can and take out the food waste container in time. Flour, cereals and seeds should be stored in special containers with lids. Check the condition of the skirting boards, floor and door frames regularly. Fill holes in time through which mice can enter your home. Monitor the activities of the services that are involved in garbage collection.

Preventive measures are most important in order to protect your home from intruders. But if they have already appeared on the doorstep, then you need to take action. To do this, today we considered several options for homemade designs.

Human life is not complete without pests created by nature - mice. Mousetraps are used to combat them. Usually people buy them in specialty stores, but this method is not always effective, because mice learn to avoid falling into the monotonous mechanism that is used in factory devices. Therefore, it makes sense to try to make a trap yourself.

Mice have long learned to bypass monotonous factory traps, so it's worth trying homemade traps

Do-it-yourself harmless devices

Not everyone can afford to buy factory mousetraps, especially in large quantities. In this case, you can use homemade mouse traps. Moreover, many of the homemade mousetraps do not kill animals, and this is a significant plus for humane pest hunters.

Thin paper construction

One of the easiest to make is a mousetrap made from can and paper. To make a trap you will need:

a jar with a wide neck;
paper;
scissors;
bait.

This video shows how to make mouse traps:

To make such a mousetrap with your own hands, you need to adhere to the following algorithm:

cover the open neck of the can with thin paper;
hang the bait over the jar;
cut the paper in the center in such a way that standing on it, the mouse falls into the jar;
provide access to the jar for the mouse by placing it in the place of the dwelling where rodents can often be found.

When the rodent wants to get the bait, it will step on a thin layer of paper, which it perceives as a surface and falls into the jar. The cut pieces of paper will cover the exit for the prey so that it cannot escape.

Using the jar and lid

The principle of operation of this trap is similar to the previous one: you will need a jar with a wide neck and a bait in the form of smoked sausage so that the mouse can smell the smell. But instead of paper, a tin lid is used, the center of which also needs to be incised and the incised teeth from the tin are bent into the can. This is necessary to prevent the mouse from getting out.

Sausage or wheat, which also strongly attracts mice, is placed in a jar. Then you need to put it in a place accessible to mice. In such a simple way, you can make a fairly effective homemade mousetrap at home.

The rotating bridge over the bucket

If there are a lot of rodents in the house, such a trap will become simply irreplaceable. The list of materials required for its manufacture is as follows:

bucket;
long needle (any other thin cylindrical iron object);
plastic bottle;
bait;
scotch.

First, you need to put the bottle on the knitting needle in such a way that the edges of the knitting needles remain a few centimeters from the edges of the bottle, the knitting needle itself runs along the center of the neck and bottom of the bottle. Then, in the center of the bottom of the bottle, you need to fix the bait with tape, and there should be a minimum amount of tape: its smell can scare away mice. The made structure of knitting needle, bottle and bait is placed on opposite edges of the bucket. The mouse, tempted by the appetizing bait, will slip on the bottle rotating around the needle and fall into the bucket.

The horizontal trap with a bucket of water is the most effective among the homemade

If this mousetrap is intended for reusable use, it should be modified: the needle must not only be put on the bucket, but passed through the side surfaces of the bucket, and so that the spoke can easily rotate. If the survival of the mice is not a priority, then the bucket can be filled with water.

Rodent gravity trap

A good option for a homemade mouse trap is the simplest gravitational device, the principle of which is based on the use of gravity. To make such a mousetrap yourself, you will need the following items:

plastic bottle;
weight in the form of any heavy object;
scissors.

In the area of \u200b\u200bthe neck on the surface of the bottle itself, it is necessary to cut a hole in the plastic, with which the mouse will enter the bottle. Then you need to tie the bottle by the neck to any object that is able to hold it.
The next step is to place the bait on the bottom of the bottle and place the bottle horizontally on the edge of the table so that the part with the bait remains in weight, but the bottle does not fall. As soon as the mouse gets to the treat, the weight of the part on the weight will increase, the bottle will turn over and fall down. She will not be able to fall to the floor because of the weight to which she is attached, and the mouse will remain inside, because the entrance to the bottle is arranged on the neck, and the rodent cannot reach it in such a situation.
Making a plastic trap
This trap requires only a plastic bottle, scissors, tape or wire, seed or bread bait. First, you need to cut the bottle into parts in a ratio of 1: 2, where the smaller part is the top with the neck, and the larger one is the rest of the bottle with the bottom.
The smaller part must be inserted into the larger one with the neck down. Pour seeds or bread on the bottom; to enhance the smell, the neck can be greased with oil. Secure the smaller part with wire or tape. Due to the light weight of the bottle, it is necessary to fix it to a surface.

This plastic bottle trap is very effective and does not harm the rodent.
Application of cans and coins
The beauty of the can and coin mousetrap lies in its incredible simplicity. The can is easily replaced with a saucepan, a coin - with a button or a metal washer. You will also need bait and double-sided tape. In order to make such a structure, you must perform the following steps:
Wrap the bait with tape on both sides.
Place the jar with the neck down.
Attach the bait tape inside the jar on one side.
Place a coin or washer (button) with an edge and put on this edge, as on a support, the part of the can opposite to the bait.

Thus, the mouse that tugs at the bait will shake the support, so the can will fall, and the pest will remain inside. This method is suitable for those who do not want to kill the mouse. However, this trap gives a lot of misfires: a breath of wind or strong draft can shake the coin, and the bank will slam shut ahead of time.
Less humane options
Developed a special glue for catching mice and insects. It is very simple to use it: you need to take a piece of cardboard, fix it firmly and spread glue on it. Then you should put the bait on this cardboard. If the mouse gets there, it cannot get out. But this does not apply to large and strong rats, with them everything is more difficult. In addition, such a mousetrap is not the safest, and children or pets can easily step on it. To remove the stuck cardboard, it is necessary to lubricate the skin with vegetable oil. Working with such traps must be carried out with gloves.
You can make a mousetrap out of wood. In this case, a wooden block of 180x160x60 mm is required. You need to drill a hole in it with a diameter of 3 cm and a depth of 6 cm - a way for a rodent to get inside. It is also necessary to drill holes for installing the spring. You will need a loop and a wire noose. A thin wire noose is attached with a thicker wire loop. The rope ties the spring mechanism and the stranglehold. The bait is placed inside the holes drilled for entry. When the mouse tries to pick up the bait, it will tear the rope with its teeth, and the stranglehold with the help of a spring will do its job.
Any of the traps will be a good choice for those who are tired of rodents, but there is no opportunity or desire to buy a ready-made mousetrap. It is worth noting that most of them are assembled with improvised means and their manufacture does not require special knowledge. For those who consider it inhumane to kill mice, there are mousetraps that are safe for animals, which you can make yourself.
The bait can range from simple seeds to smoked sausage, and you can try each one to see which is the most effective. Simplicity and low cost of manufacturing are the main advantages of the presented mousetraps.

In spring and autumn, residents of houses and apartments face a problem that is as old as the world - the invasion of mice. They always gave people trouble, especially those who have grain supplies, etc. There are many means and traps for fighting mice, which cannot always be called humane.

Although they are pests, not everyone can just kill this animal. There are many ways in which you can get rid of intruders in a humane way. Moreover, such methods of struggle do not require investment of funds and efforts from you. We are talking about making a mousetrap from plastic bottles.

Everyone has such a container, so a made mousetrap will cost a penny. Let's find out the advantages of manufacturing these structures and the technology itself.

What is the advantage of a bottle mousetrap

Most traditional mouse traps are quite dangerous if there are children and pets in the house. After all, they can fall into a mousetrap and damage their body parts, and poisons that resemble seeds can attract them. As a result, poisoning and abrasions. In addition, buying a lot of traps for a huge family of rodents is quite expensive.

A plastic bottle mousetrap is good because it will not harm anyone. Children and animals can be calm. And the fact that completely simple materials are required for creation speaks in favor of homemade designs. You will not need a lot of time for manufacturing, since the design is quite simple. Due to its design, the mousetrap is very humane and after capturing a rodent, you can simply release it away from home.

Note! Homemade mousetraps are reusable. You can catch many mice with one such design. It is enough to install it in the right place.

An important component is the bait

If you want your mouse trap to be successful, bait is essential. It may even be the most high-tech, however, without bait, the likelihood of the mouse entering the trap is minimal. Mice are not stupid creatures and will not go anywhere for fun. Therefore, before considering how to make a mousetrap, you need to deal with the bait for it.

What do mice just love? Cheese? Not really. Undoubtedly, they love him, but this is just a banal stereotype that advertising and television dictate to us. Much better mice respond to sunflower seeds, which are not only tasty, but also smell good. Mice seek food by smell, so smell is important. For greater efficiency, you can lightly fry them in sunflower oil. In addition, rodents do not disdain bread, which can also be dipped in oil for flavoring. And to surely get pests to enter the mousetrap, take sesame oil. It has a wonderful option

Advice! You can also use lard, crackers, or popcorn.

Once you have the right mouse bait in your arsenal, you can start making a trap from plastic bottles.

Bottle mousetrap - option 1

For this simple design, you need a minimal list of materials. It can be done in 10 minutes. You will need:

plastic bottle for 2 liters;
wire;
stationery knife.

That's all. In the photo you can see how the finished structure looks like.

So, all you need to do is make one cut and connect the two parts of the bottle. Just? Absolutely. Visually split the bottle in half to define half. Visually divide the part where the neck is located in half and make a mark. It turns out that you have divided the bottle by 2/3. Along the mark, using a utility knife, cut off the top.

You now have two plastic bottle elements, one shorter and one longer. There is just a little left to assemble the mousetrap. It is enough to insert the smaller part into the larger one, with the neck down. And you can use a stapler, wire or glue to fix it. The bottle mousetrap is ready. It remains to make it effective.

There are two steps for this:

Lubricate the walls of the neck with oil. Not only will it be slippery, but it will also attract a mouse.
Pour seeds or bread crumbs at the bottom.

The mouse will easily fall into the bottle, but will not be able to get out.

Advice! Since the bottle is made of plastic is a light product, the structure may fall and the mouse will come out. To prevent this from happening, strengthen it or simply glue it to a wooden block.

Bottle mousetrap - option 2

The second method is not much harder. Quite the opposite. In work, you need all the same plastic bottle and a stationery knife. That's all. The creation technology is as follows:

That's all, the trap is ready. It remains only to place the bait inside. The principle of operation is simple: the mouse will climb inside without problems, but it will not be able to get back, due to the design. As you can see, these are simple options that don't require you to be an engineer. And in such a mousetrap many rodents can fit.

Bottle mousetrap - option 3

This method is already more complicated than the previous ones, but in general it's easier than ever. This is how it looks when finished.

Balancing plays an important role here. All that is required is to cut off the neck of the bottle. All. Further a matter of technology. In the upper part of it, as shown in the figure, make a small hole and tie the rope. The length of the rope should be such that, falling off the table, the bottle is 5 cm higher from the floor. One end is tied to the bottle, while the other can be fixed to a shelf, tube by a table, etc.

The appearance of mice in photographs and in cartoons evokes affection. However, when gray tailed creatures enter the house, farm buildings, garages, the attitude towards them changes dramatically. After all, rodents cause not only material damage, which is calculated as damage to food, building materials, electrical wiring. , helminths, which entails serious consequences for human health. Therefore, when rodents are found in their possessions, the question of combating them is beyond doubt. How to make a mousetrap with your own hands and why this method is used most often - the answers to these questions will be useful for novice mouse fighters.

Benefits of mousetraps

The fastest way to get rid of rodents at home is the use of rodenticides, that is, poisons. But this method has a number of significant disadvantages. In addition to the fact that their use is dangerous when small children or pets live in the house, the death of a rodent can occur in the most unexpected place. A decomposing body will exude a disgusting cadaveric smell for a long time, which is very difficult to get rid of. And the search for the animal carcass itself may end with a major overhaul of the premises. When using traps, these problems can be avoided.

And this is by no means all the advantages of mousetraps:

Even a schoolboy or the fair sex can make traps for mice with their own hands. After all, most structures during manufacture do not imply soldering skills, technical knowledge or professional use of a hammer and other tools.
Homemade mousetraps are in no way inferior in efficiency to industrial options.
The cost of hand-made devices can be several times lower than purchased traps, since most of them are made from improvised means.

Varieties of traps

All designs of mousetraps are a device, in the center of which is located, attracting tailed pests with its aroma. Depending on the type of device, the mouse either dies or continues to exist in anticipation of its fate. Types of mousetraps that you can make yourself:

spring, made of wood and metal spokes, act when the spring is triggered;
a variety of containers, ranging from all kinds of jars and ending with a bucket or pan - the effect is achieved by shifting the center of gravity or a banal mouse fall from a height;
live traps - an automatic trap according to Tishleev's design, Zunner's trap are more complex structures for independent production, they can be either single-seat or designed for catching several individuals at once;
glue traps are a modern version of live traps, they are compact and easy to manufacture and further use, catching livestock is carried out by gluing the rodent to;
electronic traps operating from a network or other power sources - a bait is placed inside the module, and as soon as the rodent is inside, a powerful electrical discharge is released, from which the mouse instantly dies.

The photos of the mousetraps presented below will help to assess the complexity of the design.

What to do with a caught rodent

The question often arises of what to do with the captured mouse. If the animal remains intact and undamaged, the most humane thing will be to carry the captive into its natural habitat. In the event that he has injuries, it is advisable to feed him to cats or take him to a garbage dump. Particularly compassionate persons, before disposal, can first put a mouse to sleep in an apartment or house, for example, by feeding it with poison. If a decision is made to leave the gray pest as a pet, it should be taken for examination to a veterinary clinic and only after the conclusion that it is healthy, equip new housing for it.

Whatever manipulations are done with the caught animal, it is necessary to do it with gloves, since the possibility cannot be ruled out that the mouse is a carrier of various diseases or simply be rabid. The room in which she was located must be thoroughly disinfected.

The forums also offer more creative options for solving the fate of a captive animal: feed and eat, flush into the toilet, add to the mother-in-law.

How to make a bottle trap

When it comes to plastic containers from under liquid products, the fantasy of folk craftsmen does not reach so much. Rodent catching is not complete without them. A plastic bottle trap is made in just a few minutes. You can make it from a poltorashka or a container with a volume of 2 liters. In the absence of the latter, a trap for mice is constructed from a 5-liter bottle. Traps can be made in several ways.

Option number 1

The step-by-step tutorial looks like this:

Using a clerical knife, cut off the neck of the plastic container, about a third part.
Lubricate the cut neck from the inside with any vegetable oil.
Put the bait inside the remaining part with the bottom.
Turn the element with the neck so that it is directed downward of the structure and fix it with tape or wire.

The mouse, seduced by the aroma of the bait, freely penetrates through the greased neck into the trap, but cannot get out back. Several vertical fan cuts can be made on the part of the neck where the cork is screwed on. This will increase the chances of catching a large rodent.

On a note!
To prevent the mousetrap from turning over from a plastic bottle, a weighting agent is placed on the bottom: stones, a small bag of sand.

Option number 2

It is even easier to catch a mouse in a bottle:

Cut off the top of the container where the taper ends.
On the upper edge of the element with a bottom, make cuts 4-5 cm long with an interval of 1.5-2 cm. It will look like petals that need to be sharpened.
Bend the pointed edges down so that they look at the bottom.
Grease the sides of the trap and put the bait on the bottom.

For the convenience of the mouse, small planks are attached to the device. The animal will climb over them without hindrance, fall into the vessel, and sharp edges and slippery walls will not allow it to leave.

On a note!
A primitive trap is easy to make by putting bait in a bottle of oil after using the product and cutting off the neck slightly and bending it down.

Option number 3

This type of trap is somewhat different from the previous ones:

Cut off the bottleneck and discard. This part is no longer needed.
In the resulting container, it is necessary to drill two holes and stretch a rope or wire through them, through which the mousetrap will be tied.
Place the bait on the bottom and place the trap so that part of it hangs from the shelf or countertop. Secure the mount.

As soon as the mouse climbs up for a treat, the center of gravity will shift, and the mousetrap will invariably hang along with the captive. Catching pests with bottles is quite convenient. The consumables for making them cost nothing, and the captured animals can be disposed of together with the trap, thus avoiding direct contact with them.

Traps from large-sized containers

A mousetrap from a bucket of water is an outrageously simple, but very effective device. With its help, it is possible to catch several representatives of the mouse family in one night. Mousetrap manufacturing process:

Drill two holes in the top of the bucket.
Take a metal rod, the length of which is not less than the diameter of the bucket.
Place an empty bottle on the axle, after coating it with a rodent-friendly mixture so that it can rotate.
Fix the rod with the threaded bottle in the drilled holes. The neck should be as close to the edge of the bucket as possible.
Fill a bucket for a third part with plain water.
Attach a kind of ramp made of a board to the trap, along which the mouse will climb up for the bait.

Having felt the aroma, the tailed animal will climb over the bridge to the bottle, which, under its weight, will immediately turn over and throw it into the water. A deep basin or large saucepan can be used instead of a bucket.

The device is designed to catch several individuals at once. The construction process consists of several stages:

Take a wooden beam about 40 cm long. Drill 6 holes with a diameter of 2-2.5 cm and a depth of at least 1-2 cm on the end part. These will be holes for potential prisoners.
At a distance of 1 cm from the same side, cut the block lengthwise to the bottom of the grooves.
Drill 2 more holes perpendicular to the minks, into which the springs will then be attached.
Build a spring mechanism from a knitting needle, at the end make a loop of strong thin wire.
Insert the free edge of the spring into the previously prepared hole, fasten it to the bar, hide the loop in the cut.
Pass the thread through the free holes.
Put the bait in the center.

The mouse will try to get to the treat and gnaw through the thread, as a result of which the spring mechanism will work, and the rodent will find itself in the hole prepared for it.

Adhesive structures

For the manufacture of a mousetrap, you will need small cardboard squares, sheets, each side of at least 5 cm. For the base, construction residues can be used - drywall, MDF panels, fiberboard, chipboard. The second necessary component is glue. You can cook it with your own hands according to the following recipe: mix rosin, petroleum jelly, pine resin and bituminous var. If there is no desire to prepare the glue mass on your own, then the simplest way is to purchase special glue for rodents in a specialized department.

Further construction of the trap is outrageously simple. Glue is dotted onto the workpiece. A fragrant bait is placed in the center. The mouse is firmly fixed to the glue mass. The only drawback of such structures is the heart-rending squeak of the caught pest.

To or, often use a mousetrap house. A cardboard frame is made. The interior walls are covered and the middle is a traditional mouse treat. This design eliminates the risk of moving an animal smeared with glue around the room.

Electronic devices

An electronic mousetrap with your own hands can be made according to several schemes. For people with technical education and knowledge of the laws of physics, making such a device will not be difficult. The simplest trap is a small device with a fragrant treat in the center. When the mouse penetrates inside, the resistance of the circuit changes, as a result of which the damper closes and a sound signal is given, warning of the capture of the pest.

Mice are the oldest neighbors of mankind. Rodents are to blame for many epidemics, as they can carry deadly diseases. Modern medicine has gone far ahead, but some ailments can still seriously harm a person. The appearance of mice in the house is a real misfortune. Pests must be fought immediately.

It is not necessary to kill a rodent, there are many humane methods that will help you catch the pest and release it at a safe distance from your home. At home, you can make tricky traps. They are safe for pets, small children, but highly effective.

Reasons for the appearance of mice in the house

Despite their outer shell, mice are quite intelligent animals. They penetrate small cracks, run along sewers, ventilation pipes, are able to run into an open window or door. Some individuals easily bypass intricate traps, sometimes survive after being hunted, even develop immunity to frequently used poisons. To successfully catch gray pests, be smart and patient.

Human dwelling includes several important aspects necessary for reproduction and normal life of pests:

It is very easy to suspect the presence of mice in the house, it is enough to notice some aspects:

gnawed bags of cereals;
the presence of rodent feces on the floor, near the accumulation of food;
unpleasant odor;
in the night period, the appearance of rustles, noise, squeak is noted. During the day, rodents hide in secluded places, so their presence is hardly noticeable.

Finding roommates immediately engage in their extermination. To do this, use time-tested traps, folk remedies. It is not necessary to spend money on expensive poisons that can adversely affect human health, pets, even houseplants.

Harm from gray rodents

Danger of rodents:

Homemade homemade traps: how to make and use

This opinion is absolutely wrong. Rodents prefer pieces of sausage, bread, grain, which is poured with sunflower oil. Seeds are very popular among gray pests; you will surely catch a big catch with this product. Modern mousetraps are compact, lightweight, but have a significant drawback - the mouse suffers before death, which is not very humane. Also, the trap is designed for only one animal; it will no longer be possible to catch another individual.

Note! Homemade mouse traps are absolutely safe, the captured animal can be released, the product can be used many times. In addition, traps made at home are made from scrap materials; you do not need to spend money on their production.

Catching a rodent with a can

Use cases:

option number 1. You will need a bucket or any other large container, a plastic bottle (0.5), a wooden stick, bait. Insert a stick into the bottle so that it penetrates the bottom and neck of the product. Place the bottle so that the ends of the stick are attached to the rim of the bucket. Place the bait on top of the bottle. The mouse will try to eat it by stepping on the bottle, it will scroll, the rodent will remain in the bucket;
method number 2. Place a bucket under a stool, on it put a piece of light wood in the form of a strip. Put the product in the form of a springboard, put a tidbit on the edge above the bucket. A plate made of wood will not be able to withstand the weight of the bait and the rodent, it will fall down into the bucket, and the rodent itself will be trapped with it.

Pest control adhesive

Hardware stores sell special types of glue designed to catch rodents. Spread the product on a flat surface, the mouse will get stuck in it while examining the glue and will no longer be able to get out. The glue trap for mice is not suitable for small children and pets in the house.

Plastic bottle

Effective recipes for folk remedies for cockroaches in the apartment are described on the page.

Go to the address and learn about how to deal with midges in the kitchen.

Helpful hints:

store all cereals and sugar in a glass container with a tight-fitting lid. Regularly inspect your supplies, the presence of strange objects, small black lumps is a sure sign of the presence of living creatures in the house;
remove plastic bags from the kitchen. All products stored in them are potential food for rodents;
place in kitchen cabinets a few cloves of garlic, bay leaf or onion peel. Specific aromas will scare off mice;
trash cans should be located as far as possible from the residential building. Empty the trash can regularly;
hang a birdhouse near the house, attract birds of prey with crumbs. For example, one barn owl can catch up to seven rodents per night;
wash all surfaces with a solution of water and chlorine (take a tablespoon of powder per liter of liquid). The strong aroma will scare away uninvited guests;
mice do not like space and lack of trash. Maintain cleanliness, order in the apartment, private house, remove all secluded places. So you make your home unsuitable for rodents.

Mice are intelligent animals, capable of reproducing quickly and nasty to humans. Homemade traps will help to deal with intruders. Follow the instructions for their manufacture, adhere to preventive measures.

From the following video, you can learn how to make a do-it-yourself mouse trap in a few minutes: