Welding table drawing. How to make a welder's table with your own hands

When welding small-sized parts, there are problems with their fixation. Subsequently, they will affect the quality of the seam, the reliability of the connection. For the solution, special tables are made, the design of which is designed to increase the convenience of the welder's work. It is important to choose the right drawing and draw up an assembly diagram.

Table drawings

The problem of self-manufacture of a table for welding is the minimum information about such structures. Factory models cannot serve as a basis for drawing up a drawing, since they are complex, many functions are inapplicable in a home workshop. The alternative is to take the simplest drawing as a basis and improve it.

do not install casters, as they will affect stability;
make longitudinal slots (30 mm) on the working welding surface with your own hands for fixing the clamps;
install an inclined plate under them to protect the tool from sparks and scale;
installation of lifting sides to increase the working surface of the table.

As a result, you should get a similar device for welding:

Materials and components

For manufacturing, you can use any available metal-roll - corners, pipes of a profile section, sheet material. It is important that the welder's table is stable, withstands not only the weight of the workpiece, but also the possible increase in pressure on the surface during operation.

Tips for choosing materials:

Support legs (legs). They are made of a profile pipe or corner, the first option is preferable, since the mechanical strength increases. Thickness - from 1.5 mm or more;
Working welding surface. Steel plate with slots for clamps, thickness - from 2 mm. The edges are rounded to create a flat surface.
Additional designs to increase the working area of \u200b\u200bthe table from square or round tubes.
The protective screen is made of sheet iron, preferably with sides.
The lower shelf is made of fiberboard or chipboard. For better protection, you can put a thin sheet of steel.
Stiffeners - corners or pipes.

Additionally, you will need a primer and paint. It is better to process the desktop - this will increase its service life.

Assembly order

To perform the work, you will need a welding machine, electrodes, a grinder with discs for metal, a measuring tool, and bolts for fastening. A preliminary drawing of the structure is drawn up, the dimensions of the blanks are calculated. In the latter case, the thickness of the weld must be taken into account.

Assembly instruction:

Formation of blanks, checking their dimensions according to the drawing.
Assembly of the frame, welding of support posts, fastening of stiffeners.
A worktop is made according to the dimensions of the finished frame. After measurements, it is not fixed.
Installation of a protective screen. The angle of inclination is up to 45 °, an additional chute is made for pouring welding waste.
Installing the main work surface.
Manufacturing of sidewalls, they are attached to the structure on hinges. Movable stops made of small diameter pipes.
Priming and painting.
Installation of a sheet of fiberboard or chipboard.

Additionally, hooks, boxes or boxes for storing and fixing the tool can be installed on the welder's table. The choice depends on the requirements for functionality and usability.

What else is needed to complete

To create the most comfortable working conditions, you will need to buy additional tools for the welder. Their function is reliable fixation of the workpiece, the ability to quickly change the position. Requirements - resistance to temperature drops, mechanical strength.

A set of additional tools:

Clamps. Required for fixing the workpiece to the surface for precise welding;
Clamps. They perform the same function, but in a more specialized way - the installation needs a corner of honey with welded parts, a complex connection.
Magnetic base. Recommended for processing small-sized parts, which are difficult to fix mechanically.

In the latter case, the weight of the magnetic auxiliary tool and the maximum permissible part weight must be taken into account.

The video provides a detailed overview of the optimal table model for a welder:

It is quite simple to weld two parts with high quality if, in addition to a good electrical apparatus and a mask with an LCD regulator, good electrodes are purchased, and all work is performed on a convenient welding table. A steel workbench for welding can be bought in a supermarket or a specialized salon, but a more convenient and rational option would be to make a welding table with your own hands for individual preferences, height and arm length.

Types of welding tables

Most do-it-yourselfers are absolutely sure that it is possible to work with a welding machine on a regular workbench or even on a concrete floor. Experienced craftsmen are able to work with a welding inverter, as they say, "on the knee", but even they prefer to work on a special table, especially if a complex spatial structure is required.

For work using welding at home, four main table models are mainly used:

All tables for electric welding, regardless of the scheme, are made of structural steel, most often by welding or using bolted connections. On the side surface of the tabletop or on one of the legs of the table, a contact pad is cut or welded in, to which the zero clamp of the welding machine will be connected.

It remains to lay the workpiece on the table, connect the welding to the network, and you can weld the metal. This is much more convenient than trying to weld a part on a concrete floor or on bricks, when you have to spend the lion's share of the time looking for a place to connect the zero clamp.

Welding table requirement

You cannot make a welding table according to an arbitrary scheme; when choosing a scheme and base device, it should be borne in mind that you have to work with molten and splashing metal and an electric arc of one and a half hundred amperes. Therefore, the design must meet clearly defined requirements:

The base and the table top are made only of a tubular profile, the table top and the whole structure must be massive enough so that hammer blows or an accidental push, the fall of the part on the work surface does not lead to the structure tipping over;
Steel legs or supports must be tied up with a lower horizontal strapping from a profile pipe or corner. Thus, it is possible to avoid loosening or deformation of the structure when very heavy or bulky parts are installed on the workplace;
The working surface is equipped with a grating deck through which hot slag and metal drops freely, without ricochet, fall into a tray with sand or onto a concrete floor;
The place for welding work must be equipped with a hood. If the work with welding is carried out irregularly, then the metal structure is made mobile or portable, for example, installed on steel wheels with a rubber braid or on rubberized nickels.

For your information! If the welding table is planned to be used for outdoor welding, the supports must be insulated with getinax, rubber or any other dielectric.

If the working or welding plane is sewn up with a solid metal sheet, then the lower tier of the workbench can be equipped with a net or a shelf for storing tools. In professional models of welding fixtures, cradles in the lower tier there are supports for legs or mounting hooks for storing electrodes, hammers, brushes and marking tools.

Welding table design

The device and layout of the workbench must be selected depending on the height of the person, the nature of the parts to be welded, dimensions and weight. The most important conditions for comfortable work and handling of the welding machine are the following factors:

Height of the welding table. In standing working conditions, the tabletop or work surface should be at the level of the welder's belt;
Countertop dimensions... As a rule, for professional work, the width and length of the working surface of 70-75 cm is chosen. The maximum welding accuracy is achieved if the welding zone is removed no more than ¾ of the length of the welder's arms;
Welding table dimensions for working in a seated position, you can copy from a regular home stool or chair, but in this case, the device must be equipped with a protective screen at a height of 70-80 cm to avoid sparks and hot slag getting on the legs and clothes of the worker.

Welding and assembly tables

Workbenches and tables used for the simultaneous assembly and assembly and welding works conditionally drop out of the general range of equipment for welding. Conventional tables, stands and workpiece holders are made, as they say, in the format of a bedside table, a small square tabletop provides easy access to parts from any side.

In terms of dimensions and tabletop arrangement, welded assembly tables are closer to metalwork benches.

The working surface is made of thick sheet metal with drilled holes for the installation of clamps, mounting clamps or a measuring tool.

Additional devices for fixing workpieces can be located on the tabletop, for example, when welding bulky parts from thin rolled products, you have to install lodgements, base plates, tripods on the table, ensuring reliable retention of the welded edges until the end of assembly work.

Rotary welding table

The turntable workbench is more like a piece of industrial welding equipment. The working surface is made in the form of a solid metal disc with a non-combustible heat-resistant coating, raised above the table bed. The free outer edge of the disc allows you to fix the parts to be joined anywhere in the welding fixture.

As a rule, special beacons or markings are applied on the tabletop, which allow the axes of rotation to be aligned as accurately as possible and to avoid beating of the welded seam during the rotation of the part. This is the most difficult version of the welding fixture, but sometimes you simply cannot do without such a table. For example, if you want to weld an annular seam on a cylinder, a round stove body, connect the blanks of two steel pipelines. In this case, the welding table is necessarily equipped with a rotary belt drive. By rotating the tabletop, the welder can weld a heavy seam without changing his position relative to the fixture, which is very important to ensure high quality welding.

Simple welding table

The simplest version of the table can be made according to the scheme shown in the photo. The base of the frame is welded from two sections of I-beam No. 70. Legs 60-65 cm high can be made from a square shaped tube. For the manufacture of a table top, you will need ten meters of an I-beam No. 50 or a five profile pipe 40x60 mm.

The pipe is cut with a grinder along a short edge into two halves, ground and welded onto the finished frame.

The result is a very reliable and comfortable welding stage on which most of the welding work can be done.

Semi-professional welder table

To make welds in higher level products, a more complex welding table is required. One of the models of modern devices is shown in the photo. Structurally, the table differs from any others only by the presence of height-adjustable supports and a special tabletop device.

The working surface is made of perforated lamellas. A set of steel angles will provide reliable fixation of the workpiece even the most complex configuration on the welding table.

Required tools and materials

To make a full-fledged welding table, you will need a profile pipe 70x70x3.5 mm, a set of roller supports and a sheet of thick metal. From the tools you will need a welding inverter, a table saw for cutting metal and a marking tool.

Cutting metal can be done with a manual grinder, but you will not be able to get the much-needed perfectly straight cut angle, so you will have to cut the profile pipe and strips of the tabletop using a table or stationary saw.

Welding table drawings

The structure of the welding table consists of two main parts - a support frame and a table top. The frame can be made from a channel or pipe, if the welding table is supposed to be made mobile, then it is best to use a profile pipe or a steel corner.

The frame of the welding table is reinforced in the lower part with an H-shaped strapping made of a profile pipe.

For stationary welding tables, the worktop and protective box are best mounted on a brick frame. The most unusual options for a welding table are in the form of a folding structure or a folding table mounted on the wall of a garage or workshop.

Most often, for a regular garage or workshop, a welding table is made with a sheet metal worktop. In this case, it can be used both for welding and locksmith or repair. Therefore, the angular zones of the working plane are used to install metalwork yews, devices for cutting and drilling metal. Basically, the best homework welding table option is a combination of a locksmith workbench with a little extras for connecting a welding machine.

Making a welding table

The process of making the table begins with cutting the purchased square pipe. The frame and frame of the table are made of 70x70 mm square tube. It depends on how accurately the cutting and assembly of all parts of the frame will be performed, whether the entire structure will be sufficiently stable.

Table legs

The first cut four pieces of 80 cm long square pipe will be used to make the support legs or table legs. Pre-tube blanks are assembled on a steel plate in one package, cut and trimmed so that the length of all legs is kept accurate to the millimeter.

The supporting part of each leg must be fitted with a thick metal plate to which the swivel wheels or casters will be attached. Cut out of steel - five plates are immediately drilled under the wheel fasteners and welded onto the legs.

According to the selected dimensions, we cut out the details of the supporting part of the frame of the welded table.

We align the workpieces laid out on concrete along the corners - calibers and fix them with clamps. The frame is welded by points using a semiautomatic device or conventional electric welding.

After the metal parts have been seized by small welds, it is necessary to allow the structure to cool down and check the geometry of the legs again. It is necessary that the racks are in a strictly vertical position, and the distances between them on opposite sides differ by no more than 1-2 mm.

The next step is to make the lower tier of the table. Its design is somewhat different from the traditional corner strapping, as is done in the case of assembly for carpentry and metalwork workbenches.

The frame of the welding table is reinforced in the lower part with an H-shaped strapping made of a profile pipe. This design of the lower tier provides a comfortable leg position when working with parts laid on the welding table. Nothing hinders the transfer of the center of gravity far forward, as a result, it becomes possible to weld the most complex and delicate products.

Countertop manufacturing

After removing the scale from the parts and installing the support rollers, the frame of the welding table is painted with heat-resistant paint. The worktop is best made of steel sheet with a thickness of at least 5 mm. The large thickness of the metal ensures that the work surface does not deform or bubble out when heated.

The countertop plate is cut out according to the drawing and laid on the finished frame. Before welding, it is necessary to check for gaps and adjust the support points so that the table top rests on all four points of the base. The metal plate is fixed with a clamp and welded to the frame with a carbon dioxide semiautomatic device.

Protective box

The main enemies of an experienced welder - dust, slag and scale inevitably accumulate on the worktable. Sometimes the remnants of the emulsion and large drops of molten slag must be removed from the worktop before the end of the work.

For these purposes, a protective box is added to the tabletop; it can be made of galvanized steel or ordinary roofing metal. The place for installing the protective box on the table is chosen depending on the preferences of the welder.

Welding safety

When carrying out welding work, first of all, you need to be extremely careful to avoid electric shock and poisoning when welding parts with a zinc or cadmium coating. For safe work, a sheet of asbestos or getinax is usually laid on the table, on which you can lay the welding wrench without turning off the inverter.

Conclusion

The manufactured table meets all the requirements for industrial equipment and accessories when carrying out work using any type of welding. For safe work, you will need to add a rubber mat, a toolbox and a properly working ventilation system and autonomous lighting to the table.

A metal table is able to complement any interior, regardless of the style in which it was made. For example, it can be favorably placed in a high-tech kitchen or placed in an attic. If you do not have the opportunity to purchase a finished branded product, do not despair. If you wish, you can create a beautiful metal table with your own hands by looking at the helpful tips below and carefully studying the photo with instructions. The information presented below will help to understand the existing types.

If you decide to make a table with your own hands, then you should know the following: the tabletop can be made from various types of materials: plastic, glass, metal or wood. To combine the individual elements with each other, the craftsmen recommend using a welding machine for this purpose.

Wooden worktop Plastic Glass

The base also differs: it can be created from straight metal blanks fastened together (for example, pipes) or bent products, forged metal.

Profile metal table Forged table

Today, the following types of metal tables are distinguished:

workbench, that is, a work table for locksmith work, which allows you to carry out various actions with wood and other types of building materials;
forged table;
side and ergonomic metal table;
a coffee table on a metal base.

Workbench Forged table Pull-out table Coffee table

View photos of various models to make the right choice and create the perfect metal table at home.

What do you need to build furniture?

If you plan to create a table for the house with your own hands made of metal, then you will need the following types of materials:

metal profile (instead of it it is allowed to take metal rolling);
primer and paint for processing metal surfaces;
tools for even distribution of liquid substances (brushes and rollers will be very useful);
chalk and a smooth surface (this is useful for creating a template);
table top, as well as beams and adhesive for its secure fixation.

You can't do without special tools:

welding fixture;
a grinder equipped with a metal brush (if it is not available, it is allowed to use a metal brush without a grinder);
saw for working with metal;
a hammer;
screwdriver;
fasteners, in particular bolts and screws.

Additional accessories may be needed, it all depends on which option you prefer.

How to create a table from a shaped tube?

To create furniture from a profile pipe with your own hands is not so difficult. Look at the photos on our website to determine how the finished model should look, and then get down to business.

1 2 3

The process consists of the following steps:

Find suitable metal corners. We weld them in such a way that we get a regular triangle. We create an identical figure from pipes, the length of which is 38.5 cm.
With the help of a drill, he makes holes in the frame, due to which the frame will be attached to the tabletop.
We bend metal tubes (length 73 cm) with a hammer, holding the blanks with a vice. You don't have to work with the legs, you don't have to touch them, however, then their end parts will have to be separated at a certain angle. We attach the legs for the table prepared in this way to the frame, and attach the metal balls to their ends. To weld individual steel elements, it is recommended to use specialized equipment. Only it is able to provide a high-quality connection of welded elements.
Cut out the countertop using a suitable material. We process the extreme parts with sandpaper (you can also use a grinding machine for this purpose). We attach the workpiece to the legs using fasteners. We insert the screws into the holes made on the iron frame.

At this point, the work can be considered completed. Please note that the worktop can be made from a variety of materials. This factor influences which mounting method is better to choose. Sometimes people create unique countertops based on corrugated board, the process of creating such a product is quite complicated, and therefore it is rarely chosen.

It is much easier to make a tabletop made of plastic or wood, because the listed materials are quite simple to process, in addition, they are quite reliable.

How to make a cantilever table?

If you wish, you can make furniture using the console. Such a product will become a stylish addition to any home, regardless of its size. The finished tables are small in width and therefore do not take up too much space. Use a quality console for a reliable and durable interior piece.

1 2 3

The process of creating a table is not too complicated, and therefore anyone can create it, even if he is not a master of carpentry. If you want to make this type of furniture, then use the instructions below:

We purchase all the necessary tools and fixtures, first of all, the console and fixtures.
We make legs, which must be massive and strong to withstand a large table. We purchase blanks for their manufacture in a store where they sell household goods.
We prepare the boards for further processing. We take them (parameters: length - 3 m; width - 20 cm) and separate with a saw. As a result, we get 4 blanks. You will also need the same number of boards, but with different dimensions (parameters: length 145 cm, thickness - 10 cm). We install them in an upright position on the workpiece made. Along the edges we place 4 square blanks with a side of 10 cm. Combine the individual structural elements with screws. We repeat the procedure according to the described scheme in order to get a couple more blanks (in the future they will form the upper and lower parts of the product).
We attach the legs.
We make an indent 2.5 cm from the edge, lay the workpiece on top and grease it with glue for carpentry work. We process both sides with an adhesive, and then we apply a board on top. We fix the made workpiece in the place where it should be, with screws.
We form the lower console by repeating the procedure presented above.

1 2 3 4

At the final stage, paint the finished product and decorate the console to your liking. If you're out of ideas, check out the photos here to find the perfect fit for your new DIY furniture.

Building such a structure as a do-it-yourself welding table is the right decision. This will give you a place to work and practice. It should be noted that it is better to take metal for the manufacture of the device. Wood will not work as it is highly flammable.

Where to place the do-it-yourself welding table? They put it in the garage most often. has many advantages. For example, a grounding can be installed on it, which ensures safety for the master.

Welding table functions

The do-it-yourself welding table has a unified design. He is:

a plane for work, in which there are clamps for work pieces;
ground loop.

What tools and fixtures do you need?

Many are interested in how to make a welding table with their own hands. This article will describe the process technology. An important point is the preparation of the necessary tools and devices.

You will need:

with all accessories (electrical cables, clamps, electrodes, etc.);
pliers;
roulette;
ruler;
a hammer;
three C-shaped clamps;
a hacksaw for working with metal for cuts at the desired angle (an electric grinder is preferable);
regular square;
square for carpentry;
nippers;
tap for creating a thread M8;
a machine for milling or turning works (it will be needed for chamfering parts).

You can make a welding table with your own hands in different ways. There are two product models.

First option

The do-it-yourself welding table, the photo of which is presented below, has dimensions of 1100x660x900 mm. So that the structure does not turn out to be too expensive and heavy, it is made of a thick plywood sheet. In the future, it is covered with a metal plate.

What materials will be required?

You will need:

profile pipe 40x20x2 mm - 9.9 m;
steel strip 40x4 mm in size - 2.0 m;
four M8x40 bolts and four M8-6 nuts for fastening;
one sheet of steel 1100x650x2 mm;
one sheet of plywood 1220x1220x10 mm.

All materials must be corrosion free. If there is rust, the surface should be sanded. In order to make a welding table with your own hands, drawings are required.

Blanks

Blanks are cut from 40x20x2 mm:

for the frame of the legs and lintels - two pieces of 1.1 m each, two pieces of 0.66 m each, four blanks of 0.9 m each, one piece of 0.58 m;
two blanks for leg jumpers, 0.58 m each;
one piece for 1.02 m long leg strap.

Chamfers are removed by means of a milling or turning machine.

Welding frame for table top

The components of the frames required for welding are located and fixed by means of C-shaped clamps.
The frame is a rectangle with a lintel. To check if the assembly is correct, we recommend that you measure the two diagonals of the rectangle. The permissible error is no more than 1 mm.
The blanks for the frame are connected. First of all, a rectangle is welded, and then a jumper. First, a snap seam is used, then a solid seam.
A protective treatment is carried out with a grinder.

How to finish the countertop?

The frame corners are reinforced with overlays. For the purpose of fastening the legs and other attachments, a 40x4 mm strip is used. Chamfers are removed. Finished parts are welded from below in the corners.
To secure the legs, it is necessary to weld on the strip from the strip. Drill holes D in the legs<6 мм, затем по ним сделать аналогичные отверстия D=6,7 мм в раме и нарезать резьбу М8. Их следует прикрепить, затем приварить боковые перекладины.
A tabletop must be cut out of a plywood sheet. It is covered with a sheet of steel. If necessary, the layers are attached.
We advise you to treat everything with an anti-rust compound.
A design such as a homemade do-it-yourself welding table can be given a modern look. This is achieved thanks to the attached wheels. This will make the device easier to move. The wheels must be equipped with locking devices. Additional parts must be installed on the table to fix the workpieces. The torch holder can be welded to the top corner. It can be made from a pipe of the required diameter.

This design is quite large. It is suitable for welding large items.

Second option

A do-it-yourself welding table can be made in a different way. The second model has a size of 445x750x915 mm. This design is compact.

Required material

Two plates 445x750x3 mm.
Four squares 25x25x3 mm 76 cm long (their angle should be 45 degrees).
Four corners 32x32x3 mm 91.5 cm long.
One pipe D \u003d 3 cm, the length of which is 7.5 cm.
Four threaded wheel supports.
Four support nuts.
Four nuts for connection.
Four lock washers.

Stages of work

The frames of the table top and the second shelf are welded. Two identical rectangles, 76 and 46 cm in size, are prepared.
Dimensions are subject to verification. The permissible error is 1 mm.
The parts for the frame are welded with a tack seam.
The correctness of the geometry is checked.
After that, all parts are welded with the main seam.
The table top and the second shelf are welded. First, the connection is made with a stick seam, and then with a continuous one.
Legs are welded to the frame. They are fixed by means of clamps. They are attached at an angle of 90 degrees. The joints are welded with a spot seam.
In a similar way, the legs are attached to the second shelf, located at a distance of 70 cm from the table top. After checking the geometric correctness, continuous seams are made.
Wheel supports are mounted.
A welding torch holder is installed in the corner. A pipe D \u003d 3 cm is used, the length of which is 7.5 cm.

What precautions are there?

Everyone knows that welding carries a certain amount of risk. To protect yourself from any trouble, you should follow a number of important recommendations:

It is necessary to provide full ventilation of the work place. Ventilation with a hood is recommended.
Protect against electric shock. For this purpose, work should be carried out only with rubber gloves and make sure that they are not wet.
The eyes must be protected from the arc glow. For this purpose we recommend using helmets and goggles.
Do not splash metal on the work table. Before welding, you must clean the place of work from debris. Particles that are easily ignited are particularly hazardous. If work is carried out in the garage, then there should be no containers with paint, containers with fuel nearby.

There are also special means for protection, without which the work is not recommended.

Reading time ≈ 4 minutes

A compact do-it-yourself welding table will help you organize your workspace and save space. Thanks to its small design, the inverter and supply cables can be conveniently placed without the risk of mechanical damage. Additionally, a ready-made table is quite realistic to use for welding. Due to the built-in wheels, it is possible to move the table assembly to any convenient place.

Required tools and materials

You can make a welding table from a profile pipe, as in the photo, with your own hands without using special equipment. It is enough to have all the necessary materials and a minimum set of garage tools, in particular, a grinder, welding, measuring angle, jigsaw, drill and vice.

The design dimensions of the table according to the drawings in the article are: 370x580x780 mm, however, depending on the need, you can use your own dimensions.

Step-by-step instructions for making a welding trolley

1. Making the top table cover... The metal table for welding is equipped with a lattice cover, which is made of a profiled pipe with a cross section of 50x50 mm (for the outer frame) and 30x30 mm for the inner lattice. The pipe is cut to size with a grinder. The prepared elements are connected by welding. The outer belt of the lid consists of a 50x50 mm profile, which is welded into a rectangle, taking into account the design dimensions. The internal space is filled with a 30x30 mm profile. Pipes are welded after 30-50 mm, forming a grid. Welding seams must be cleaned with a grinder.

2. Making table legs... The legs for the welding trolley can be made from a round pipe with a section of 25x25 mm or 30x30 mm. In the absence of these dimensions, the use of 20x20 mm is allowed. Materials are cut to size (780 mm). A total of 4 metal legs are required. The pre-cut elements are welded to the finished lid at the four corners.

Important! It is important to control the skew while welding the legs to the cover. To get the most stable table, it is necessary to ensure even installation angles and the location of the racks. We recommend using a square and tape measure.

3. Additional rigidity belt for the table. The metal trolley for the welding machine must be as rigid and durable as possible. To do this, it is necessary to make an additional stiffening belt, which will be located at a height of 200-300 mm from the floor level along the racks. The amplifiers are made of a 30x30 mm corner, which turns outward with an acute angle. The elements are welded in a circle to connect all 4 posts. If necessary, you can additionally grind all welds.

4. Making a handle for lifting and transportation. The handle is necessary to conveniently transport the table to any specified location. For the handle, you can use a metal bar or reinforcement with a cross section of 8-10 mm. It is important to initially give the desired shape to the element. In the future, as seen in the video, the finished handle is welded to the supporting frame of the top cover. The handle must be welded from below in order to avoid further inconvenience during the operation of the table.

5. Hooks for welding equipment or cables. Side hooks are essential for conveniently securing thick cables, holders, or storing any other welding tool. Hooks can be made from an ordinary 100-150 mm nail. To do this, it is enough to give the desired shape to the nails and weld them to the bearing legs from the outside.

6. Wheels to move. Wheels are necessary for more convenient movement of the table to a convenient place. In total, you need 2 wheels assembled with fastening mechanisms. It is most preferable to use small parts from a shopping cart or similar equipment. Before installation, the top of the locking mechanism with the nut should be welded to the uprights. Next, the wheels are screwed onto the welded nut.

Important! Weld the fastening nuts for the wheels, taking into account the horizontal. The details should be on the same level.

7. Niche for tools. The niche should be made of plywood, chipboard or OSB boards. If necessary, you can use a solid sheet of metal. The material is cut to size with a jigsaw and placed on the corners at the bottom of the table.

8. Protective cover from debris and scale. For manufacturing, you can use an ordinary sheet of metal of any thickness with a bend around the edge. Beforehand, a metal bar of 8-10 mm is welded to the supporting legs, while one side must be higher than the other in order to create the required slope. The cut metal sheet is mounted on rods.