How to turn off an iPhone if the sensor does not work: detailed instructions. Non-standard ways to turn off iPhone

It is unlikely that the owner of an iPhone or other iOS device has never had problems with the software of his gadget when the device refuses to respond to touching the display, including pressing the device control buttons. What to do if iPhone 4, 4S, 5, 5S, 6, 6S freezes and does not obey the simplest commands of its owner? This article will discuss three methods for restarting an iPhone from any state.

First of all, let's make the assumption that the iPhone works in standard mode, it has an adequate response to tachi, obediently performs the necessary commands by pressing the Home and Power buttons, while the owner of the gadget needs to reboot the device into normal mode.

Reboot iPhone in normal mode. Effective ways.

1. It is necessary to press and hold the power button in this position (it also performs the shutdown function)
2. Next, you should touch the button and swipe your finger to the right. Such an action in iPhone terminology is called a swipe. Thus, the iPhone display will start dimming.
3. Then you need to momentarily press the "Power" button. Then the Apple brand logo will appear on the screen, and the iPhone will start to boot in its normal state.

How to force restart an iPhone

Both an iPhone and any other Apple device can be rebooted from absolutely any state. To do this, you need to simultaneously press two keys: "Home" and "Power" for 10 seconds - no more. Then the iPhone screen will stop reacting in any way and will go out completely.

Next, you must release both of these buttons. If even after that the gadget does not turn on and the manufacturer's logo does not appear on the screen, then you will have to press the power button. It is this method that makes it possible to forcibly restart an electronic device as soon as possible, although it is advisable to use this method not too often in order to avoid the undesirable consequences of a device failure.

Video instruction "Hard Reset iPhone" - Hard reset iPhone

How to restart an iPhone without a button. Opportunities.

This method is applicable only when the iPhone is working perfectly, it does not show any glitches in the software, but the start button is visibly damaged and works ineffectively.

Nowadays, effective management of Apple gadgets is possible not only through manual intervention. In fact, the developers of this device have thought out easier ways to turn it on. You just need to enable the function Assistive Touch.

This opportunity is just intended to turn on the device without directly touching it. When this function is enabled, the device starts to understand remotely.

The same procedure takes place if you need to turn off your iPhone without touching. This is done by using the device menu.

Video tutorial "How to enable Assistive Touch in iOS"

A few notes as a conclusion.

• The above mentioned methods are perfectly applicable when turning on, off and freezing an iOS device in any state.
• The last method is most effective when the touch panel of the gadget is in good working order, when it freezes Assistive Thatchdoes not function.

Electronics from Apple are deservedly considered one of the most functional, productive and stable. However, any, even the most reliable, equipment periodically fails, and the iPhone is no exception. The situation when the sensor stops responding to user commands can plunge an unprepared owner into a stupor. But there is a way out of such an unpleasant combination of circumstances. Which one - you will find out by reading the information below.

Turn off (restart) iPhone

To bring the gadget back to life, you need to reboot. If, when the sensor is working, it is enough to hold down the shutdown button for a few seconds and drag the slider across the display, when the sensor is not working, the procedure will be slightly different.

You do the following:
simultaneously press the Home key and the display lock button;
keep the indicated keys pressed for a few seconds until the device reboots.

In this case, it is important to correctly select the duration of the stay of the mentioned buttons in the pressed state. By holding them for 3-4 seconds, you simply turn off the iPhone, and a 5-7-second exposure will lead to a complete reboot, which is more convenient.

In some cases, the problem may be aggravated by the lack of response to pressing from the hardware buttons. Due to the fact that iPhones do not have a removable battery, you will have to wait until the gadget is completely discharged and turned off, after which it remains to connect the charger to the smartphone and try to turn it on. If the sensor still does not work, the problem is most likely at the physical level - you will have to contact a service center.

The mechanics of the IPhone interface are created from the principle of maximum functions for a minimum of buttons. This improves the ergonomic qualities of the devices.

But damage to even one button leads to the loss of a number of functions, including smartphone power management.

It is impossible to disconnect a device with a broken "Power" button right away, for this you need to configure applications or download additional ones. Some require following simple instructions, while others require special skills.

How to turn off an iPhone if the shutdown button does not work

The device is turned off in an alternative way through the preinstalled application or using third-party programs. Also, the design of the iPhone provides for the removal of the battery, but careless intervention here will lead to damage to the smartphone.

Such methods answer the question

Assistive Touch is already installed on iOS. To activate, find this application in the "Physical & Motor" settings. Once launched, the application will collapse into a semi-transparent button. Tap on it and select the "Device" submenu, then hold down "Lock Screen" and slide your finger to the right until the power is turned off.

If your device doesn't freeze, use this method first. To turn on your smartphone again, connect with a USB cable to the charger or computer. With the help of "Assistive Touch", smartphone gesture control is also configured.

In the setting of this application, select a gesture or create it yourself, and then link a power off to it.

Third-party programs expand the functionality of the device. application "NCSettings" this is a "jailbreak widget" with one-word access to smartphone settings. Among them is the emulation of the "Power" button, which turns off the power when pressed.

The interface looks like a separate control panel, the functions of which are represented by icons on the tool bar. It is invoked by sliding to the right at the top of the screen.

It is not the only program with this functionality, but NCSettings is free. You will not be able to download or buy these applications through Appstor, so use Cydia .

The widget is launched in the notification settings. The disadvantage of this method is that the process of "jailbreak" for such programs is complicated and requires the skills of an advanced user.

Removing the battery is a radical way to turn off your iPhone. This is a risky undertaking, for which the responsibility lies entirely with the user.

But in the case of a complete "scorching" of the device and the inaccessibility of service centers, removing the battery will be an effective solution.

1. Set the silent mode and turn off the device.
2. Unscrew the housing screws at the bottom end.
3. Press down and slide the cover up. She will act.
4. At the bottom, remove the screw securing the battery.
5. Carefully disconnect the battery cable from the board.
6. Pull on the plastic tab until the battery pops out.

The instructions may not be relevant for new iPhones, so it's best to check out the latest videos about removing the battery.

Wait for complete discharge

The last and most obvious way to disable the device. If the methods listed above seemed difficult to you, then you should discharge the iPhone, and then take it to the service center.

How to discharge your device faster:

1. Turn off power saving mode
2. Adjust the screen brightness to the limit.
3. Turn on Wi-Fi and Bluetooth.
4. Launch applications and keep them active in the background.
5. Turn on the camera and record video.

It is more expedient to use the above methods for each individual case and taking into account skills.

And again we return to the topic of discussion of one of the most popular smartphones of the last few years. I think it's not a secret for anyone that iPhone smartphones are very popular in Russia. Many users who have purchased this device for the first time often ask questions regarding the use of the phone. One of them sounds like this: how to turn iPhone on and off? Believe it or not, it's incredibly simple to do it.

Take your phone in hand. At the top of it, you will see the Power button. Click on it and hold for a few seconds until the screen gives the first signs of life. As soon as a bitten apple appears on it, you can release the button. Now it remains only to wait a little (literally a few seconds), as the device will be loaded and ready to work. Actually, that's all, nothing else is required of you.

If suddenly, for some reason, the device refuses to start, try this. As you know, the iPhone has two main buttons: Power, which is located at the top of the screen, and Home, which is located on the front of the device. You need to hold down both of these buttons for about 10-20 seconds to restart the smartphone. It is quite possible that if the gadget did not want to load by pressing the Power button, it will load after holding the indicated buttons. If it doesn't work, try holding the buttons down for a longer time (40-60 seconds).

In order to turn it off, you will need to hold down the Power button for a few seconds, after which a kind of window will appear on the screen. Swipe over the "Slide to power off" and the device will be turned off within a few seconds.

At the same time, you should not turn off the gadget by simultaneously pressing the Home and Power buttons, as this does not turn off the smartphone, but only reboots it.

Everything described above applies to absolutely all iPhones that have been released until now: 3G, 3G, 3GS, 4, 4S, 5, 5S. As for the iPhone 6, nothing will change in this regard, except that the Power button will be on the side instead of the top of the device.

How to turn off iPhone if Power button or screen doesn't work?

Let's look at two fairly common cases. If the Power button does not work, then turning off the device will not work so easily. You will need to install an application that allows you to turn off your smartphone without pressing the Power button. You can find it in iTunes. You will most likely have to turn on the iPhone using such an unusual method: connect it to the charger and it turns on.

If the screen does not work, that is, the sensor, then you will not be able to turn off the phone at all, unless you wait until the battery runs out. But turning it on won't be a problem.

Of course, the American company Apple designs, manufactures and delivers excellent devices to the mobile phone market that justify their cost due to the corresponding technical characteristics and an optimized operating system. Only at the expense of its devices the company can be called stand out against the background of its competitors. However, these devices do not last forever. And any device can suddenly malfunction, and then work, as if nothing had happened.

One of the most pressing questions asked by users in many forums devoted to the works of the "bitten apple" was the question of how to turn off the iPhone if the button does not work.

Causes and consequences

Many users who ask if a button does not work do not even strive to first figure out what the causes of the malfunction are. And almost all owners of devices running the IOS operating system face such a problem. Sooner or later, this, unfortunately, happens in the life of each of the devices. The “Power” button (as well as the “Home” key) as a result of a software failure fails and stops responding to elementary commands dictated, if you can call it that, by the user.

Currently, we have jointly managed to develop three methods that will help you restart your device in case of a similar problem.

Method 1: when the device is stable

Let's say the device is stable. This is the simplest situation that can be. Everything reacts stably, touches are perceived, commands programmed on the “Power” button are executed. At the same time, there are no problems with the operation of the Home key either. So, just hold down the first indicated button and wait for the “Turn off” or “Cancel” labels to appear. Next, touch the left side of the strip called “Turn off” (it is colored red). Then, without lifting your finger from the screen, we swipe across the screen. After the strip is set aside, the device itself turns off, and its screen turns off. Press the power button again for a few moments. You will be able to notice the corporate logo of the company, after which the boot of your device will continue as usual. Now let's consider the question of how to turn off the iPhone if the button does not work.

Method 2: the software crashed

How to turn off an iPhone if the button does not work? In this case, you will have to use the so-called forced reboot method. In this case, the device may not react at all to touching the sensor, and not just to giving commands through the soft keys. To force restart your device, you will need to simultaneously hold down the power supply and exit to the home screen. We keep them active for ten seconds. The device turns off. After that, release the keys. If the logo did not appear immediately, then we proceed according to the second part of the previous method, that is, press the key again. It should be noted that this method should be left as a last resort and in no case should it be used regularly.

Now you know how to turn off an iPhone without a button, although this method is only suitable for emergencies when the software fails.

Method 3: special programs

Users who ask what to do if the iPhone button does not work are unlikely to know about the existence of special programs that will be very useful for the device as a whole. They make it possible to operate devices without mechanical keys. The creators of the program, like no one else, understood that the resources of the buttons are large, but not limitless. Actually, this led to the creation of software. As it can be cited function Assistive Touch. Activating it will automatically give full access to the touch control of the iPhone. The function allows you to very, very subtly, one might say, flexibly customize gesture control.

Thus, in a short time (after you get used to the new principles) you will abandon mechanical elements in favor of sensory manipulation methods.