How to make the inner decoration of the cut. Interior in a log house: photo

The decoration of the cut is the final stage of construction. Its task is to arrange walls, ceiling and floor, and the result is a cozy and beautiful house. Finishing works are proceeding not earlier than 1.5-2 years after the construction of the building. This time is needed for shrinkage. If you do not wait for it, then there is a danger of cladding.

Regardless of which materials are selected for finishing inside the log cabin, its walls must be previously treated with an antiseptic. It is recommended to think over and pave the communications in advance. The choice of finishing materials depends on their location.

There are two main types of chub finish: with the preservation of a natural structure or facing by other materials. The first option is based on the use of walls of the house as decorative design. The second implies cladding with plasterboard, clapboard, plastic. In any case, the internal finish must meet such requirements:

• be safer in environmental;
• have sufficient strength and wear resistance;
• attractive premises.

The choice of option depends on the preferences of the owner, its financial capabilities. Interestingly, often owners of private houses seek to arrange them under the city apartment, and residents of megacities choose natural materials. The decoration is proceeded after insulation and styling the draft floor.

Finishing clap

For the slaughter of the cut, 2.2 cm thick boards are used, made of pine or hardwood trees. They can be placed vertically or horizontally, forming an original design. For small rooms, the vertical position of the facing is chosen, and for bulk - horizontal. Wallow can lay the floor and ceiling. The advantages of the material:

• naturalness;
• creates an additional layer of insulation;
• environmentally safe;
• non-futured installation.

The minuses include the high cost of quality materials. In addition, the lining itself requires antiseptic processing (protects against fungus) and flame retardant (increases fire resistance).

Mounting the lining can be directly on the walls or the crate. The first option is possible if the house is erected from a glued or profiled timber that provides smooth walls. The second option is used for home from rounded logs. In addition, it is preferable, since it allows the insulation between the wall and the wallpaper, as well as hide communications.

The crate makes from bars, having them approximately every 0.5 m perpendicular to the lining. Mount the boards start from the corner. Typically, installation does not cause special difficulties. Due to the presence of "spike-groove" clutches, individual elements are easily connected to each other, creating a solid construction. The market offers lining without connecting recesses and recesses. It is cheaper, screws or nails are used for attachment. But it is more difficult to achieve quality coverage with its help.

Each board needs to be consolidated to the crate. To do this, use different ways:

• On Kleimmer. This special device allows you to quickly and securely secure the lining. On the one hand, it is attached to the groove of the board, and on the other hand, they screw to the crate.
• On self-tapping screws. A hole is drilled in the board, into which the self-tapping screw, fasten it to the bar. The hat should slightly "drown" in the clapboard. At the end of the installation, all holes are applied, polished flush with the board. Minus ways to considerably.
• On galvanized nails. A nail is clogged at an angle of 45 degrees. His hat should not perform above the surface, so as not to interfere with the connection with the next element. The disadvantage of the method is that the groove often bothers, it makes it difficult to work.

Completed by staining or applying varnish. The advantage of varnish is the preservation of the natural beauty of the tree. Change the color of the boards or give them a shade with the help of a veil.

Covering Block

These facial boards have a rounded form imitating logs. From the reverse side there are ventilation grooves. They provide air circulation, warning condensate education. Block house is mounted horizontally, start laying from below. The principle of installation is no different from the cladding clapboard. Also it will be necessary to first make the crate, and then on top of securing boards.

Using a block house in the house, achieve an accurate imitation of the present hut. The material is well combined with different styles in the interior. The presence of special grooves on the board ensures the simplicity and reliability of the connection of individual elements. There are practically no minuses at the coating, except for high cost.

Plasterboard

For someone, finishing a cut of drywall, it may sound like a joke. Why spoil the natural beauty, turning a wooden house into a regular apartment? But this option is popular, and the result often causes admiration. The floor in this case is covered with carpet, parquet, linoleum. The ceiling is also or mount the stretch design. Advantages of walls of plasterboard:

• universal material for creating intricate structures;
• sheets are convenient in the installation;
• low cost.

The disadvantages are the need for additional insulation, low resistance to mechanical damage. All the beauty of the natural log house hides under the sheets.

Mounting drywall inside the log cabin, first perform the crate from the metal profile. Before it should be laid wiring and insulation. To the profile of sheets are fixed with self-draws. Their caps at the end of the installation you need to sharpen the thief with the wall. The popularity of drywall is due to the possibility of quickly and without much difficulty to make walls smooth. They are suitable for watering, staining, plastering, editing panels or artificial stone. In addition, various designs are made from drywall, which decorate the room, increase its functionality.

Condition in its natural beauty

If the inner surface of the walls is neat, then it may well remain unchanged. Such walls look respectable, give the house a cozy look. Of course, it will be ridiculous to look like a High-tech or modern style. But country, Eco style or imitation hunting house will be absolutely appropriate. Of course, some work will have to do.

For the floor, you can use a parquet board or lining. The best solution for the ceiling is a tree. The decoration of the cut largely depends on the method of its erection. If it is built on the technology "in the bowl" of a rounded log, then the surface can be covered with varnish. It will emphasize the painful beauty of the tree, protects from damage. The wiring in this case is paved under the plinth. Pipes can be sewn into the wooden frame.

For houses, built "in the paw" are characterized by smooth walls. If necessary, they can be brought to perfection by treating the grinding machine. To hide cracks, chips, swirls, the surface is spitting. Complete decoration with staining. Speected white or brown walls look.

Jute rope.

• prevents penetration into wind and moisture;
• holds warmth.

The finish is started after processing the bar with an antiseptic, grinding. The floor to such a cladding can be made from parquet board or oak, and the ceiling to trim the clapboard. You can start the rope stacking in six months after the end of construction. For consolidation, glue, brackets, special nails with a plastic hat are used.

Decorative rope from jute, pre-treated antiseptic, fill the crowns. To do this, take a piece of rope, the edges of which are deceived by glue or wrapped with thread. The glue is applied to the junction with a pistol, the rope is applied, every 15 cm ripped nails. Having finished laying, rope and logs are covered with varnish. This decoration of the cut is different:

• original view;
• low cost;
• economical consumption of materials;
• functionality.

The styling process must be done carefully, painstakingly place each strand. The minus method is the complexity to make the hidden wiring of power grids and pipes. Alternatively, the wiring can be paved along the lower crown, hiding under the rope. Another drawback is impossible to inside additionally insulate the walls.

Leaving a cut of his natural look, household owners receive a number of advantages:

• you can not wait for shrinkage at home;
• it will be required;
• a simple finish can be performed independently;
• guaranteed beautiful view.

The cons of this option consist in difficulties that will arise with communications. To hide them, you will have to mount box or frames. In addition, the choice of wall design is very limited. Every 5-7 years will have to update the finish.

Interior decoration is an important part and the final stage of the construction of a country house. Many do not think about it during the construction of the foundation and installation of a church, the installation of communication systems. But when the house is already under the roof, engineering networks are held, the question arises than to separate the wooden house inside. The finish "Under Zero" is not suitable for everyone, and it also requires special processing of the walls with paint-makers. In addition, the house with such a finish looks empty and uncomfortable.

I want materials to be durable, reliable, but at the same time inexpensive. And the interior as a result turned out to be cozy, comfortable and attractive. In addition, when arranging a wooden house, it is important that the products are environmentally friendly, retained the naturalness of the structure and maintained a comfortable indoor microclimate. Today the market offers a mass of finishing materials. In this article we will look at what to see the walls in a wooden house inside inexpensively and beautiful.

Features of the selection of finishing materials

• Pay attention to the label. The designation E1 says that building materials are intended for residential premises, E2 - for the hallway, kitchen, toilet, utility rooms, E3 - for social and industrial premises;
• If you use wood finishing materials, you can choose a class and quality worse than the required. After that, refine products and lead to aesthetic appearance on their own. For example, to sand and polish, cover with varnish and / or paint, soak by protective compositions, if necessary to trim. Thus, you will spend less financial resources than when buying high-class materials;
• For premises with high humidity (bathroom and bathroom, balcony, basement, cellar, etc.) Choose moisture-resistant materials. If you use wooden products, be sure to handle the products with protective means from the negative impact of moisture, rot and mold;
• Choose an environmentally friendly natural materials for the arrangement of a wooden house. In such a structure, plastic double-glazed windows or panels will be inappropriate. They will break the environmental friendliness of the house, will bring disharmony and only spoil the interior;
• Choose durable, reliable materials and do not forget about the quality of work on finishing. Remember that the wooden log house gradually seats, which can lead to cracks. Think out this moment in advance so as not to do the repair every 3-5 years and not change the spoiled trim.

Can not use

Before you determine than to sew a wooden house from the inside, we will examine what materials do not fit. When finishing, you need to abandon plastic panels and linoleum. Such products characterize availability and efficiency, high resistance to moisture and a wide selection of colors, easy installation. However, PVC advantages overlap artificiality and lack of ecology. They highlight a sharp toxic smell when heated, dust is harvested, air and steam passes.

Linoleum is a popular affordable coating, but not recommended for wooden floors. It is non-environmental and requires careful preparation of the base, since the material can be laid only on a flat surface. In addition, in a wooden house, it looks not very appropriate. In rare cases, linoleum can be seized in utility rooms or basement. However, it is better to lay the usual wooden boards.

The panel of the OSP, the Fiberboard or chipboard is also not suitable, since the manufacture of materials is used by the harmful industrial glue. In addition, it is the most non-environmental products that are made from wood waste. They have a not very aesthetic appearance, so such materials are more used for the draft finish. Including not recommended to use laminate for floor sheat. It is not resistant to moisture, slippery and cold.

Wall panels MDF - foreign analogue of fiberboard, which is more environmentally friendly, since the gluing of individual elements does not use toxic resins and enzymes. Such panels are easy to fix directly on the walls. They are distinguished by a variety of design and color gamut. However, they are completely not resistant to high humidity and wear.

The panels listed above are not strong enough and not resistant to damp. In addition, they are firewood and are not characterized by a very attractive appearance. When covering with such panels, the room is more like an office or office than a living room.

But what then choose and the better to strip the walls inside the wooden house? A suitable option will be natural wood materials with protective impregnation. It can be planed and polished boards, lining, veneer and other similar products. Let's look more in more detail what materials it is better to separate a country house from a bar or logs.

Wooden materials for finishing

Immediately we note that the most suitable option will be wooden lining. This is an affordable material with an attractive appearance, eco-friendly and natural, easy to install and care. Thin rails are used for ceiling, and for walls. If you want to create the effect of a log house, choose a block house that simulates a rounded log. One block house block is half-headed, and the other is flat.

Lining - the best combination of prices, quality, appearance and environmental friendliness. But if you are ready to pay, choose elite natural wooden materials. These are cork panels and panels from the array.

Cork coating - modern materials that distinguish environmental friendliness, high quality, strength and durability, luxurious appearance. They perfectly tolerate increased humidity and are suitable for each type of room. The only but substantial minus is a very high cost.

The massive board or the panel of the array is also an expensive option, but it is very reliable and high-quality, since it is completely made of the natural tree of the elite breed. Such a coating looks expensive, luxurious and prestigious. A good array even with heavy loads and high humidity will easily serve without repair 30-50 years.

A parquet board is a suitable floor finishing option in a wooden house. This is an affordable material that characterizes light and operational installation. And the decorative painting or lacquer coating will make the appearance of the parquet refined and aesthetic.

Veneer panels are excellent budget material, which is chosen by the walls. It represents a thin cut of an array of a tree, which retains the wood pattern, color, texture and structure. For decoration, choose only natural veneer, as it is more durable and reliable.

The veneer has an attractive appearance, it is characterized by ease of installation and practicality, good sound and thermal insulation, low price. But at the same time, the basis of the material is Fiberboard or chipboard plates, therefore the material is not 100% environmental and cannot be used in rooms with high humidity.

Other types of budget materials

Plaster is a traditional ceiling finish, which is sometimes used for walls. It is inexpensive and affordable material, easy to use and installation. It will give a smooth white surface, but the white color is not always appropriate in a wooden house. Such material is used if it is suitable for the design of the rooms. For example, it can be a classic or French Provence.

Plasterboard - an affordable and fast finish option. These are sheets of cellulose and compressed gypsum, which is easy to install and fix. Modern manufacturers produce material with special processing, which increases moisture resistance and fire. Plasterboard allows you to create complex designer projects, install two-level ceilings. However, this is a fragile and not very aesthetic material, so it requires refinement after installation (painting or bleaching wallpaper).

Ceramic tile or tile suitable for finishing the bathroom, bathroom or kitchen. If we put the tile on the floor in the bathroom, choose products with a rough surface so as not to slip and ensure safety. Such material is characterized by durability, durability and increased resistance to moisture and dampness. Today you can find a lot of designer options for tiles, including decorated under the tree.

But when laying tiles on wooden walls, consider that under the material you need to make a reinforced base, otherwise the product will not last long! It is not necessary to completely spread the bathroom with tiles. You can only decide individual sections or use mosaic. By the way, the combination of mosaic and wood materials looks very effectively and harmoniously.

Lining - the best option

Wooden lining is characterized by high strength, reliability, aesthetic and 100% ecology. Such products are used to cover the walls and ceilings in a wooden cottage, a country house, a bath and a sauna, a balcony and a loggia, in the apartment. This is a universal material that is easy to lay, therefore, even non-professional will cope with installation.

Narrow thin rails are tightly adjacent to each other, form good sound and thermal insulation, align the surface of the walls and the ceiling. Wooden materials look aesthetically sophisticated. If you want to save, buy grade V. After laying, the defects can be hidden using varnish or paint coating. Class and more expensive and elite, it does not need to be improved, and the variety C is suitable only for draft works or finishing of utility rooms.

Do not forget about protective processing of lining. You can buy materials with finished processing or handle wood yourself. The second option will be cheaper. Install the lining on the crate made of bars. In the crate, it is convenient to install hydro and thermal insulation materials. Reiki can be stacked vertically, horizontally or diagonally.

Today you will find a wide range of lining, differing in a tree variety, width and length, profile and class. The best combination of quality and pine prices. This wood variety is suitable for home, cottages or gazebos. For the bath, choose a lip or alder, as they are well tolerated humidity and high temperature, do not heat up. After installing, you can paint the material in any color, achieve the desired shade or gloss.

Is it possible to use drywall for decoration of a wooden house

Plasterboard is the most popular finishing material that is used in the apartment and in a private house. These are flexible sheets with a refractory surface and increased moisture resistance. They create a smooth surface and hide the flaws of the walls or the ceiling, differ in light installation.

Plasterboard hides pipes, wires and other communication. But the main advantage of this material is accessibility and low cost. In addition, today you can find plates of different sizes, shapes and colors, which allows you to create any design room design.

But the trim of plasterboard often looks unfinished and requires finishing painting or blending wallpaper. In addition, it is quite fragile and continuing material that may not cope with serious loads. Therefore, drywall is better to use for the creation of partitions or racks, but not for finishing a wooden house.

If you decide to use drywall, choose only high-quality products of a reliable manufacturer. Often, harmful toxic substances are added to the material, which is harmful to human health and violates the environmental friendliness of a wooden house. Qualitative real drywall is safe, as it is made of natural natural gypsum.

In the company "Marisrub" you can order the construction of a house from a log or turnkey bar! The masters of the company will qualitatively and reliably fulfill all the work on finishing, including holding and connecting engineering networks, wall covering, ceiling and floor, installation of windows and doors. Order a comprehensive turnkey construction, and you do not have to worry about anything!

After the construction of a wooden house, the next step is to carry out work on its interior decoration. The quality of their implementation should be paid to special attention, since the quality of the work will depend on the comfort of the person's stay, the heat and sound insulation characteristics of the room, as well as the aesthetic attractiveness of the house.

The need for interior decoration is due to the following reasons:

• as a result of finishing works, the house acquires a more attractive form;
• the lack of finishing significantly reduces the period of operation of the structure. In the presence of isolation on the main material, from which the house was erected, it turns out to be significantly less than the load, which contributes to the preservation of the structure;
• the finish improves the thermal insulation properties of the house, so the execution of these works will contribute not only to the creation of a comfortable temperature indoor, but also will significantly save money on heating.

It is impossible to start the decoration immediately at the end of construction. It is necessary to wait a certain period of time - from 1 to 1.5 years until shrinkage of the house will occur. Upon completion of this process, the construction will be ready for work indoors.

However, among the options for the finish there is a way to reduce expectations and perform the appropriate work after the end of construction. This method consists in processing a polished cut by paintwork. This makes it possible to significantly save time. It is advisable to perform the finishing in this way if the log house is quite warm and there is no need for additional insulation, as well as in the presence of smooth walls.

The advantages of such a process are as follows:

• it is possible to start work immediately after the construction of the house;
• simplicity;
• lack of significant expenses.

The disadvantages include:

• the complexity in the process of finishing the absolutely smooth surface of the walls;
• diagravatic coating.

This finish needs to be updated every 5 years. By this time, other materials can be applied, since the shroud shrinkage will be finally completed. Consider all available materials with which you can finish.

Features of working with clapboard

This type of material is a boards with a thickness of up to 220 mm, which are based on hardwood and pine wood. Installation of lining can be made with a horizontal and vertical method. To determine the most appropriate way to proceed from the structure of the structure:

1. For small houses, a suitable option will be vertical laying.
2. If the construction has large parameters in this case, it is better to stop on the horizontal installation. This condition is explained by the size of the material. The length of the lining is 2.5 m. With an inappropriate laying method, joints are formed.

The features of the finish of a log cabin should also include factors:

1. Before starting work, it is recommended to carry out the processing of lining with special preparations by protecting material from fire, as well as the negative effects of insects and moisture.
2. The lining is recommended to be attached to the crate. Thus, the laying will be as smooth as possible, moreover, communications can be hidden for the creewater frame. The presence of the crate is not mandatory if the house is built from a glued or profiled bar, as such walls themselves are quite smooth.
3. For the crates, the bars are used, which are located on the entire perimeter horizontal manner, while observing the distance of 50 cm.

Start the inner decoration of the cut from the angle of the room. Thanks to the grip of "Schip-groove", the laying will be carried out exactly and does not require high labor costs. There are three methods for fastening boards to cerebral slats:

1. The most qualitative method is considered to be fixed by a special clamp, which is called kleimer. One part of this product is fixed inside the groove, the second part at the same time it is necessary to connect with a rail with a rack.
2. Also, the mount is performed with galvanized nails. Under the appropriate slope at 45 °, the nail is inserted into the "groove" and clogs.
3. The last third method involves the use of self-drawing screw. In the board it is necessary to make a hole, the diameter of which should correspond to a screw screw, and the depth must be equal to half the thickness of the board. Then, in this hole, screw the screw and close the font. After that, it is necessary by grinding to align the font with the board.

The use of lining has both advantages and disadvantages. This material is characterized by ease of installation, environmental safety, creates additional insulation and has a natural look. But at the same time, the lining is quite expensive material and the board before work must be treated with special drugs.

Finishing of log cabins. Photo:

Rules for finishing using rope

This option can be used only for a log, erected from the rounded log. The presented method of finishing is performed using a jute decorative rope and requires compliance with some rules:

1. It should be proceeded only after processing the bar with antiseptic means.
2. The rope is placed in the wints of the structure. This finish contributes to the retention of heat indoors, and also prevents the flow of wind and moisture inside.
3. The rope is attached in several ways:

• through a bracket;
• with glue;
• due to special nails.

The internal cladding process occurs in such a sequence of actions:

1. Before mounting, the rope should be treated with an antiseptic preparation. Next, you need to cut off the fragment of the desired length.
2. The edges should be wrapped with threads and treat with varnish or glue to avoid their dissolution.
3. For fastening, special thermal glue is used, which is applied using a gun. Apply the glue should be on the bars in the locations of the rope.
4. After you need to put the rope on the adhesive composition.
5. In parallel, it is necessary to drive into it a small nails - 15 cm - 20 cm.
6. After the end of the work, the rope and logs need to be covered with varnish.

The rope has such advantages as:

• acceptable cost;
• reliable protection of seams of a chub from the penetration of the cold;
• originality and decorativeness.

However, the lack of this material are the following factors:

• labor-intensive installation process;
• the inability to hide communications;
• difficulties in insulation by other materials.

Features of the application Block Haus

Installation of this material is similar to laying the lining and implies such a sequence of actions:

1. The decoration of the log inside is carried out on the crate frame.
2. It is necessary to start work below and move in the upper direction.
3. The last board will need to be cut, in the top of the wall it will rush less in the eye.
4. It is worth noting that the House block is placed only with a horizontal way.

The advantages of this material are features such as:

• reliable imitation of the present hut;
• simplicity laying;
• ability to warm the walls and hide communications.

The disadvantages of the Haus block can be attributed to:

• high cost;
• unnatural view when improper laying.

Washing method with putty

Despite the fact that this option is used in most cases for walls made of bricks, this method can also be applied to finishing buildings from a log. In this case, the plastering composition should be applied on a mineral or acrylic basis. The putty creates a coating that protects the log house from the effects of destructive factors. Also, with the help of special components, the composition can be given the desired color.

The process of finishing is simple: first, through the screws, it is necessary to attach the grid to the cutting to the cut, and the plaster should be applied. This method makes it possible to level the surface of the walls.

The obvious advantages of putty are low cost, a large selection of colors. The process of applying the composition does not require special skills and knowledge, unprofessional can be cope with work, besides, in the shortest possible time. But such a finish will serve relatively long - about 5 years. It will not be possible to completely hide the pipes, and the finish in general will not have a pronounced aesthetic species.

Application of drywall

This material is quite rare as a finish for the logbook, since in this case the characteristic impression of a wooden house disappears. But in some cases, this move justifies itself. The process of cladding has such features:

1. Plasterboard is mounted on the crate made in the form of a P-shaped profile.
2. Between the log cabin and plasterboard it is recommended to put the insulation, for example, glass gamble.
3. Then the material is attached to the profile through screws.
4. After the end of the installation work, the joints need to sharpen, it will provide a smooth surface.

As the advantages of plasterboard material, the following factors can be distinguished:

• the ability to perform at the request of recesses and protrusions in the wall. It will give the opportunity to hide the pipes and wires and implement any designer solutions;
• also, this material is characterized by low cost and ease of the assembly process.

Among the disadvantages, a comparative briefness should be allocated, because The material will last from 15 to 20 years. In addition, the need to apply additional insulation materials, instability to damage and eliminate the characteristic atmosphere inherent in wood houses.

Plastic finish

This material is suitable for finishing individual zones of the room, however, not for its complete cladding. Plastic is mounted horizontal and vertical way. The most common is the last option:

1. At the initial stage of work, you need to collect the framework. The panel products will be mounted on it.
2. At the top and bottom of the frame, you must attach profiles.
3. Installation should be started from the corner. The panel must first start in the profile, after which the grip occurs.
4. Panels are attached to the profile with the help of self-tapping and nails. To improve the compound of plastic panels, liquid nails or glue are used.

The advantage of plastic as finishing material are features:

• ease of installation;
• affordable cost;
• the ability to hide communications;
• a sufficient choice of color grazing.

But at the same time plastic material has disadvantages:

• easy flammability;
• insufficient resistance to mechanical stress.

Conclusion

Interior decoration is essential for subsequent operation of the church. First of all, the aesthetic tasks can be solved with the help of finishing materials and arrange the house according to their preferences. In addition, the finish has a practical value for a log. It will create an additional insulating layer and will help maintain a comfortable room temperature.

Interior decoration of the cut. Video:

A wooden house from a log or bar is a beautiful country accommodation where you can enjoy the comfort and comfort, magnificent scenery and clean air. Building cottage, you can choose the desired area, layout, quantity and purpose of the rooms. The main advantages of country housing include the absence of neighbors behind the wall and environmental friendliness. Wooden building materials will support and maintain this environmental friendliness.

Breed and timber - 100% eco-friendly, natural and safe materials. They create a favorable microclimate in a log house due to regular oxygen updates, healing properties of wood and a pleasant forest fragrance. In addition, the tree characterize the strength, reliability and durability, high thermal insulation.

Due to light weight, wood does not require a massive deep foundation, and log or brusched walls look aesthetically finished, so do not need a decorative finish. Materials are easy to customize and install. Therefore, the wooden house is distinguished by the available cost of construction and finishing, installation in a short time.

Bar and logs - aesthetic and attractive externally materials that will build a house of any design. Many interesting projects of wooden country cottages, country houses, baths and arbors you will find in the Marisrub catalog. But the house is built and the question arises, what design to choose for a wooden structure?

Not every style, materials, furniture and accessories are combined with wood. In addition, the selected materials should not disrupt the aesthetics and environmental friendliness of wood. Let's see what to choose the interior design of a log house.

Breeding home interior

Works on the finishing and arrangement of the interior inside the house are starting only after shrinking a cut. The structure of the bar is sitting on 6-12 months, from the log - 9-18 months. In any case, it is impossible to start work earlier than six months after construction. At this time, there is a maximum shrink shrinkage, which can lead to windows overcast and door frames, damage finishes.

Today, many customers choose a trim under zero without the use of decorative materials. After all, the tree is a noble, exquisite material that looks luxurious and harmoniously fits into the surrounding stop. In addition, the logs and the ram in natural form preserve the ecology of wood. In this case, the materials only need to be treated with protective means from the negative impact of moisture and insects.

For protective processing, choose varnish and / or paint. You can choose transparent tools that retain wood texture and color. In addition, manufacturers offer varnishes with matte and glossy glitter, wood paints of any colors. If you wish, you can not only protect the material, but also get the desired color, shade or shine.

Of course, you can apply other options and styles. But remember that with any design, the selected materials and the inner design of the house of the log house should maintain a unique atmosphere and the ecology of the wooden structure, emphasize the natural beauty of the tree. Therefore, choose natural and safe finishing materials!

Our company's experts will help you choose the desired design and strong reliable materials. In "Marisrub" you can order the construction and finishing of a turnkey wooden house! We guarantee the quality and efficiency of work.

Construction of houses from wood will always be popular. This is caused by the unique properties of the material, both operational and aesthetic. But fulfilling work on the construction of their own hands is required to take into account the many nuances that will affect the durability of the walls and the whole building. One of the questions you want to decide will become the interior decoration of the wooden house.

Features of finishing

The finish of the wooden house, carried out from the inside with their own hands, should be performed only after careful study of technology and methods. The walls are better than the materials that pass the air well. You can use the materials that are completely sealed, but in this case the walls of the house will stop breathing.
The same rule should be taken into account when external finishing and insulation. If the material of the walls of the walls does not let the air, the effect of the greenhouse is created indoors. In this case, to ensure a normal microclimate, a device forced ventilation will be required. Such events require additional financial investments.

Also, the interior decoration of the wooden building should be performed from relatively lightweight materials. In this case, finishing works from the inside will not have a strong effect on the walls and foundations (the load on them will not increase significantly).

When to start

You can finish a wooden log cabin, you can only complete the completion of its active shrinkage. If we are talking about an old house, then we start without fears. If the walls are folded recently, it is necessary to take into account the material from which they are built:

• glued bar - after 3-4 months;
• conventional timber and log in 1 year.

The exact completion rate of the shrinkage depends on the climatic features of the area. The humidity of the air and the average temperature has a strong effect. It is allowed to start the finishing of the inner walls from the bar and the logs only after their cacopa. Works with your own hands are performed in two stages:

• the first caisp of the walls must be carried out in a few weeks after assembling the walls;
• the second is done in 6-8 months.

To cross the walls, it will be necessary to prepare a sealing and heat insulating material. It uses jute or pass. Sometimes moss can be applied. Perform work is necessary simultaneously outside and from the inside. Cookp starts from below. Heated the crown on the one hand, it is necessary to immediately move to the other side. Otherwise, the walls are possible.

After the completion of warming work, the building is raised by several centimeters. Over time, the interventic material condenses, and the height will become the same. It is due to the tight fit of the jute or a packle to the logs (bruus) prevented drafts, the thermal insulation indicators increase.

After the second cacopa, it is necessary to periodically measure the height of the walls. If during the pair of months the measurement results do not change, the shrinkage process has suspended. In this case, you can start performing finishing with your own hands.

Preparatory stage

Before starting work, it is necessary to decide if it makes sense to flicker the walls on the inside. If they are stacked carefully, and the interventic insulation does not stick out of the joints, the lining is not required. Paintworks will apply cheaper and better.

If the walls are irregularity, and the seam of cacopa is distinguished by an unattractive view, it is worth thinking about the finish. No matter what materials are used, it is required to protect wood from fungus and mold. For this, antiseptic compositions are used.

As an additional impregnation uses anti-epires, they will increase the resistance of the material of fire.

Finishing options

With their own hands, the decoration of a wooden house can be performed in the following ways:

• clapboard (various forms);
• wall panels;
• plasterboard.

Under all materials, it will be necessary to perform a frame on the surface of the walls. It is best to produce it from a tree. It is also possible to mount without a frame. But in this case, it is necessary to thoroughly align the base and eliminate all the protruding elements. Sew on the frame costs for the following reasons:

• no need to level the base;
• ensuring the gap for the circulation of air and drying the walls;
• the ability to lay thermal insulation material;
• you can hide wiring.

The disadvantages of this method should be attributed to the possibility that insects or rodents will settle in the gap between the wall and the trim. Get rid of unwanted guests in this case will be quite difficult.

The sheathing of a house of wood should be performed with the provision of a small gap between the ceiling. It is necessary for leveling various deformations and shrinkages. The width is accepted 2-4 cm. Close space easily ceiling plinth.

Clapboard

Wall decoration in this case has the most diverse appearance.

Application of lining with decorative impregnation

You can use the material of different widths, from different wood breeds. Also distinguish types of lining depending on the transverse profile:

• standard;
• blockchas;
• softline;
• landhaz;
• american;
• etc..

Fastening the finish to the surface of the walls with their own hands is performed in several ways:

• on nails in the ramp (now used less often due to aesthetic considerations);
• on nails or self-tapping screws at an angle;
• on beammers.

The last two ways are quite laborious. Fastenings are nourished so that damage to the front surface of the lining has occurred. Instead of nails and self-tapping screws, a construction stapler with brackets also use. In this case, brackets with long legs and a narrow back are required. Elements for fastening are made of stainless steel.

The lining is made of wood, so the same as the wall can give shrinkage. It is better to buy a chamber drying material, but if there is no such possibility, it is necessary to take into account the following points:

• over time, the plank of natural drying dries, the slots appear between the elements of the finish;
• you can leave the surface as it is;
• of the aesthetic considerations, you can remove the lining and nourish it again;
• at the initial consolidation, it is required to take into account that the facing will have to be removed, it is important to choose, with which it will be more convenient to work: with nails or self-draws.

Removing the material from the ground, it is necessary to follow accuracy and prevent damage to the walls.

This option allows you to diversify the interior and give a unique appearance of the room. Such types of finishes are very loving designers, the flight of fantasies is practically unlimited.

With the help of wall panels you can create an accent in the interior

The finishing of a wooden house from the wall panels can be different types:

• wooden;
• bamboo;
• glass;
• plastic;
• leather.

When using glass, care must be taken. Such material is sufficiently massive and can have a strong impact on the supporting structures of the building. It is not recommended to apply with a small thickness of wall fences.

The mount is carried out in accordance with the manufacturer's recommendations. Facing can be attached both directly to the crate and on the substrate fixed on the crate. Methods are quite diverse depending on the material, before purchase it is worth examining the features of each separately. We also recommend reading the articles about the interior decoration ,.

Application of drywall

The decoration of the wooden house of plasterboard is a common phenomenon. The walls of the walls can be done quite easily, but the following rules must be followed:

• Plasterboard is not durable material. It is easy enough to damage when the break. For this reason, it is recommended to carry out the trim 2-3 years after construction. In this case, the normal operation must be followed in the building (heating should be included).
• When the sheat device for 1-2 years after construction, it is necessary to mount the plasterboard to the floating frame. So it turns out to avoid damage: the base and finish will move independently of each other.
• To prevent or slow down the disclosure of cracks on problem areas, it is required to sample them with a reinforcing grid. A grid is taken from a polymer material. The main places of amplification: joints, seams and angles.

Old wooden house

When performing work within an old building, it is necessary to preliminarily assess the condition of the walls and perform a set of protective events. All suspicious sections on the walls are tested for strength. To do this, you can use a screwdriver, a knife or a chisel. Zones with the following features are suspicious:

• darker than the main surface;
• lighter than the main surface;
• differing texture;
• difference density.

If the wood crumbles, it is recommended to refer to a specialist who, depending on the nature and scale of damage, will prompt further procedure. Even if there are no defects on the surface, it is required to process the base of the antiseptic.