How to make the spinner spin faster? How to spin the spinner. How to make a spinner spin longer Spinner that spins in different directions

Because many Russian citizens rushed to buy this toy with the slogan “I don’t know what it is, but I need it!”. Do you recognize yourself or your child? But, after the purchase, it turned out that it becomes boring to spin the toy for a long time and tediously, and then two factors begin to emerge in the user: either the collector's factor who buys up all sorts of unusual variations, or the competition factor, when you start thinking, how else can you spin the spinner.

And with proper training, people get great spinner tricks. After looking at a couple of them, it seems that there is nothing complicated in this process, but after trying it, you understand that you need skill, and what a skill.

Of course, everyone started somewhere, so I chose those spinner tricks that are suitable for beginners, well, or beginners, if you like this formulation more.

Spinner tricks for beginners (beginners)

I always thought that if people, especially children, are busy with something, it's great. All the more so when this process is clearly beneficial. So about tricks with spinners, if anyone asks, I will answer that I am in favor. When children are small, mothers do everything they can to develop their fine motor skills: they make special sand, donate their buttons, and then wipe the sofa and the child from finger paints ... and then, bang, and he is already a teenager and develops motor skills, coordination, attention, well, let them need a modernized whirligig for this.

Personally, it makes me happy if young people compete in skill. And not only her, as the photo and practice show. By the way, this guy is doing the "Twist" trick.

I decided to make a selection of a few tricks that a beginner pros can repeat, and that look pretty cute and not traumatic.

The very first thing you need to do spinner tricks for beginners is training. Those. you need to learn how to rotate it on one finger, then move it to the next. This is where the path of the master begins. The ability to adapt to the speed of rotation of the blades develops.

How do you like this selection? I think that if you master these five tricks, then the more difficult ones will be too tough for you.

How they catch him is a mystery to me. The only thing that I have learned personally for myself is that you need to learn this "Throw behind the back" trick outside the house and out of beating objects. After all, out of ten times, a beginner may not catch him even once, and let this iron contraption crash onto the land rather than onto the tile or laminate.

There is also a trick with spinner rotation on the nose, but I certainly wouldn't do it. It's better to be with the eyes than with the injury. In short, everywhere you need a head, there are no eyes on the log, well, twist on it. There's nothing to hurt, okay? Hope someone will heed my advice.

How to spin a spinner with one hand

We saw a cute guy walking and a spinner in his hand spinning without stopping, while he does not use either his body or his other hand. It turns out that he simply gives the toy rotation with adjacent fingers on the go.

How to spin a spinner without using your other hand. Everything is simple!

Firstly, you need to take the toy with your index finger and the pad of your thumb and start giving the blades rotation to the adjacent or nameless ones.

But not immediately twist, but for balancing, just do rotational movements. In this case, we do not touch the blades. No one said that it would be easy, and if the spinner is heavy, the finger that you rotate can get sick.

For example, it is not convenient for me to hold this rotating thing with my index finger, so I move it to the middle one, and I make the rotation element with the index finger. Here's another option for you how to spin a spinner.

To summarize, throughout the article, I will say that playing with a spinner can either captivate or quickly get bored. It all depends on whether there is a place for development and creativity in this game. People always tend to keep doing something when it's interesting. Someone just indulged in a toy and threw it away, while someone found a place for a new interesting trend among amateurs, like tricks with spinners.

After all, how interesting it is for ourselves to watch when a simple girl throws the spinner from knee to knee, then catches it, and it continues to spin. I immediately think that if she achieved such a result with her perseverance, then, give her something to her liking, she can move mountains. Having mastered some trick, everyone feels like a hero, and what can we say about adolescence. For them, this is generally a small victory and self-affirmation, maybe the difficult period at this age will then pass the parents.

Well, a video with a selection of tricks with a spinner.

We have seen a lot of questions about increasing the spinner speed, and we would like to give you full information on how to solve this problem.

First, we will mention that the best fidget spinner is the one that is perfect for you. By design, by the comfort of the hand position, and most importantly by the price. Some people prefer to turn the turntable every 5-10 seconds, this does not mean that they spin it and wait 2-3 minutes until it stops completely - that would be silly. So do not be shy when they tell you that your spinner is spinning slowly - you may not need it!

How to increase the speed of the spinner (cleaning the bearing)

Step 1: Remove the protective plugs to get to the mechanism itself.

Step 2: Clean your bearing with any solvent. Some solvents contain acetone and isopropyl alcohol. The spinner bearing can be greased with WD-40 grease, but be careful, after this procedure you need to clean everything thoroughly, because this grease will attract all dust and dirt.

If your bearing is already lubricated with factory grease, then you need to get rid of it completely.

1. Take a deep plate.
2. Pour solvent into it
3. Submerge the spinner bearing completely - all dirt and debris should dissolve
4. Repeat the procedure until a clean result

Be careful: some spinners made on a 3D printer have 1% styrene in them. It is used in the direct production of parts on a printer. So, isopropyl alcohol can deform and dissolve it. Therefore, we recommend learning how to completely remove the bearing, especially if you plan to clean it every week.

You can also wash it with warm soapy water, but make sure the bearing is perfectly dry and free of soapy film.

Step 3: Drying the spinner. We recommend using cans of compressed air, because they will guarantee that your bearings are completely dry and free from liquid residues. Many metal spinners can corrode, so to protect yourself from further problems, your spinner must be perfectly clean.

You can use a hair dryer, but only on the removed bearing without the frame, i.e. if you have a plastic spinner, hot air can start melting its elements.

Step 4: Collect your spinner. If there are still problems with its speed, then repeat the procedure. If this repeats, it is better to get a better quality spinner.

This article is about how to increase the speed of a spinner, so when removing excess grease from the bearing, you should understand that your spinner will become noisier and make squealing and crackling sounds.

• If you wanted the fastest and quietest spinner possible, then you will need to lubricate it, but not in the amount that was before cleaning, but only 1 drop of good lubricating oil.
• If, after cleaning, you are still not satisfied with the spinner's rotation speed, then you should change its bearing. We wrote earlier about the types of bearings for a spinner, but for now we can recommend a hybrid (steel + ceramic balls).
• Physics cannot be fooled! Metal spinners will have more speed advantages over plastic ones. If you have a plastic spinner, and you expect unrealistic speeds from it, then you should reconsider your choice and think about buying a metal spinner.
• Spinner plugs are very important... They protect the bearing from moisture, dirt and dust. Every time you take a spinner out of your pocket, you expose it to external influences, you can drop it, drown it or just leave it on a dusty surface. We recommend cleaning it once a week with a can of compressed air or a hairdryer. This will increase the quality of the bearings.
• Some spinners are assembled in such a way that it is impossible to pull out the bearing and clean it. This suggests that the manufacturer does not want you to be able to change the internal mechanism in advance. Therefore, if you cannot get the bearing out of the spinner, then it is better not to try, otherwise you can simply break the spinner.

We hope that at least some of the information will help you in increasing the spinner speed. Suggest your solutions to this problem in the comments!

Well, today is the time to learn how to use this ultra-fashionable finger toy. If you have already become the proud owner of it and have just begun to master the art of handling it - this article is for you!

How to spin a spinner correctly: basic rules

With one hand

Take the fidget by pressing the finger holder (circle in the middle) between your thumb and forefinger. Use your middle finger to spin one of the spinner's petals. Alternatively, hold the toy between your thumb and middle finger, and rotate it with your index or ring finger.

Try different methods and decide which one is convenient for you personally, so that the fidget rotates freely between your fingers without touching your hand.

With two hands

Holding the toy between two fingers in one of the ways listed above, start the rotation with the other hand. In this case, the spinner will spin faster and longer.

On a flat surface

You can spin the spinner on any flat surface. Place the toy on a table, for example, with the finger of one hand, lightly press down the finger holder, fixing the fidget, and twist it with the other hand on one of the petals. In this position, the quickly wrapped toy will demonstrate its unique pattern in all its glory.

Spinner tricks

Having mastered the simple technique of rotating the fidget, you probably want to improve your skills in handling it. Various tricks and tricks with this anti-stress toy are based on throwing or rotating it on different parts of the body and surfaces.

Throws

To begin with, try rolling the fidget from one hand to the other so that during the "flight" it does not stop rotating. To do this, twist the toy strongly in one hand and throw it in the other hand so as to grab the middle right away.

Having mastered this technique, you can move on to more complex tricks: tossing from finger to finger, from palm to palm, behind the back, from under the leg, etc.

Simple spinner tricks for beginners are presented in this video:

Rotation

After learning the basic spinning of the fidget between the fingers and on a flat surface, you can try spinning the spinner on your fingers, palm, knee, or even your nose! You can also try to spin the toy on various surfaces and objects, timing the time on a stopwatch and setting more and more records.

Host spinner trick competitions with your friends and become the spinning champion of this wonder toy!

How to make the spinner spin longer?

To increase the speed and duration of rotation of the toy, the bearing must be periodically flushed with a special WD-40 liquid or other means. More detailed step-by-step instructions on processing and the degree of effectiveness of various funds can be viewed in this video:

Fidget spinners entered mass fashion not so long ago, but in just a few months they won the hearts of not only adults, but also children. Today spinners are spinning everywhere: on the street, at work, in the subway and even in kindergarten! And every child wants his toy to be somewhat different from those that his peers already have. You can buy an original spinner, but such a toy is not cheap, and the search for a unique spinner takes a lot of time. The best solution is to make your own spinner.

So, we bring to your attention a few simple ways to make a spinner with your own hands from the materials that every home has.

1. How to make a spinner from plastic caps?

Materials: caps from any plastic bottles of the same size (4 pieces), plasticine, hot glue, a nail, scissors, a lighter and a toothpick.

What do we have to do: put plasticine in 3 lids, glue the remaining space of the lids with hot glue. Take the fourth lid (without plasticine) and make a hole in it, for example, with a heated nail. Glue the sand caps to the one where you just made the hole. Take a glue stick and cut 2 small pieces (1 cm) from it. Break a toothpick in half and put a piece of glue on one end of it (make sure that the sharp tip of the toothpick does not stick out) and place it in the center of your future spinner. Slide the remaining piece of glue stick onto the back of the toothpick. Your spinner is ready!

For a more interesting look, you can paint the caps in different colors with acrylic paints.

2. How to make a cardboard spinner?

Materials: plastic bottle caps, cardboard, scissors, marker, awl or nail scissors, glue, 3 coins and a pen rod.

What do we have to do: Using the lids, draw 4 circles on the cardboard in the shape of your future spinner. After that, cut 5 such blanks and glue them together, carefully gluing the edges. Next, cut out smaller circles. Use an awl or fine nail scissors to make a hole in the center of the spinner. Glue 3 coins or any stickers on the sides of the blanks.

Next, take the deferred pen shaft and carefully cut 1 cm from it. Make small holes in the center on two small circles. Insert the cut piece from the handle shaft into one of the circles and glue it along the edges of the hole to securely fix it. Slide this circle into the center of your spinner and glue the second circle on the back. The two remaining small circles can be glued over the ends of the rod. To make your spinner spin faster, put some kind of spacer between the blank of the spinner itself and the small circles (in our example, we used metal pendants).

Done! Let the child decorate his spinner as he wants, you can use sequins, stickers, rhinestones and other decorations.

3. How to make a spinner using bearings?

Materials: bearings (3 pcs), tie clamps, glue gun or superglue (for a more complex spinner).

What do we have to do: wrap the bearings on all sides with cable ties. Cut off the extra clamps and that's it - the spinner is ready!

To make it brighter and more attractive, you can make the design more complex. Take 7 bearings, place 6 of them around the seventh. You will not use all 7 bearings, you only need 3 circular and 1 center. You only need the rest of the bearings for accurate measurement, so we will leave only those that form a triangle. Glue all the necessary parts with a glue gun or super glue. The spinner is ready! Decorate the spinner as you like. You can glue fluffy wire, apply glue to the sides of the spinner, and cover the edges with glitter.

Rest assured, no one will have such spinners like your child!

The entertainment industry is constantly expanding. More and more toys appear regularly that develop fine motor skills of the body.
The new hit that displaced the once popular fingerboard is the fidget spinner. At its core, it is a single bearing surrounded by a certain number of plastic sheets.
These toys are completely different. Everyone can choose a personal one.

How does this device work? What is it for? And in general, what can you do with it? Let's deal with everything in order.

Description of the spinner

Spinner can be seen in almost every tenth inhabitant of a big city. The thing is that it is one of the best means to release the accumulated internal energy. In addition, it is often used to calm down after a hard day at work.

This toy consists of 3 parts:

1. Bearing- the main stock of the spinner. At its core, this is an ordinary metal ring, inside which there are balls of a smaller diameter. It is thanks to this spare part that this mechanism rotates. The quality of this part significantly affects the rotation speed.
2. Housing Is the part that revolves around the bearing. It comes in completely different shapes. Its appearance significantly affects the sensations from the device spin-up;
3. Cap - an element that is screwed into the bearing for ease of use. It is difficult to rotate the spinner without it.

This "toy" works in a simple way. You just need to hold it between your thumb and middle finger, and spin it with the middle finger of your other hand. It can rotate from 1 to 10 minutes.
The most important parameter for fans of this device is the rotation speed.

What to do to make the spinner spin longer?

The answer is simple: it is necessary to buy a high-quality bearing and replace it. It is best to immediately buy an expensive spinner, which will be created for high-speed spinning.

Types of spinners

There are many different spinners. They differ in the design of the case. Let's consider the most popular ones:

• Single - the most popular option of all. It is a small plate with a bearing inside. It is widespread due to its compactness and convenience. The easiest way to spin them. A good option for spin world beginners.
• Tri-spinner - in its essence, it is a miniature "shuriken" with a metal weight for rotation inside. Also, its design resembles a three-leaf clover to many. The beauty of this mechanism is that bearings are mounted on each petal. This is to maintain balance while spinning and to increase speed. It is made from a wide variety of materials, ranging from metal to wood and leather.
• Quad spinner- this is already a “four-leaf clover” with a bearing. In terms of design, the brightest and most colorful. For some reason, decorators are trying to make them “the most stylized”.
• Exclusive - these include all spinners with an unusual and individual design. They are not always convenient, but most interesting for hardcore fans (real fans of these things).
• Wheel- is a bearing and a wheel that rotates around it. An interesting gimmick, but no wow effect when used. That is why only the most sophisticated people use it.

How to choose a spinner?

First of all, when choosing a spinner, it is worth starting from personal preferences. The most important element to consider is design. You should like him personally. Choose the one that fits best in your hand.
You can spin the spinner right at the time of purchase to evaluate the second and third significant factors - speed and vibration. As stated earlier, many people want the spinner to be faster than lightning. However, not everyone likes this. The point is - the higher the speed, the stronger the recoil, that is, the vibration. Many people like the pleasant feeling in their hands. If so, then take a metal spinner, you won't go wrong.

If vibration and high speed are not yours, then get a spinner with a plastic body.

Spinner tricks

Simple helicopter

This trick is basic. In fact, having mastered it, there will be no problems with others. It consists in starting the toy and throwing it from one hand to the other. An important point: during the "flight" it should not "stall".
This technique is done in a simple way:

1. Spin the spinner in one hand for about 5-10 seconds.
2. Toss it to your other hand and grab it. Rotation should not stop when gripping.

Main focus This cool trick is that you need to intercept the spinner strictly in the middle with your thumb and forefinger.
It turns out that you need to grab the bearing cleanly. This is not as easy as it might seem at first glance. However, practice will put everything in its place.

Runway

This trick is a harder variation of the first. Here's how to make a runway:

1. Launch the spinner from one hand to the other.
2. We catch it with the back of our hand. You need to get exactly to its center so that the rotation does not stop.
3. After that, raise your palm up and catch the toy in weight with your thumb and middle fingers. Ideally, the rotation should not stop.

The main snag This technique is that it is not easy not to stop the spinner in the palm of your hand. The main thing in this business is accuracy and dexterity. As the saying goes, "patience and work will grind everything."

Throw from under your feet

This trick is no longer an easy one. It will take a long time to grind to it. It is done like this:

1. Launch the spinner in one of your hands with your index finger. Lower your hand gradually downward, trying not to disturb the balance of rotation.
2. Throw the toy up, while lifting your leg. It should fly under it.
3. With the other hand, you need to grab the bearing so that it does not stop rotating.
4. You can do this method with both legs until the "engine dies".

This trick is difficult to master for several reasons. The first - problems with lowering the arm and maintaining balance. This will take a long and hard study. The second - It is insanely difficult to grab the middle of the spinner, since your leg will be your obstacle.

Well, are you ready to repeat the trick?

Choose any in our store and exercise!

Fidget spinner tricks for kids

According to a 2015 study by American scientists, the spinner is a great toy for children with attention deficit disorder. It allows you to improve concentration and develop fine motor skills of the fingers.
Not surprisingly, many people buy these toys for their children. Naturally, they also want to do some cool tricks with it.

Advice: start with the helicopter reception. As mentioned earlier, this is the basis for all further tricks. Also, no one prohibits the execution of the previously described elements.

Take off into the air

This interesting trick will appeal to every young boy. It will take some practice to learn how to do it, but the effort will be worth the effort.

1. Spin the spinner in one hand with the middle finger.
2. Launch it into the air and catch it with your other hand.
3. Now we toss the toy with a sharp upward movement. You need to catch it with the same hand by the bearing so that the rotation does not stop.
4. You can toss an infinite number of times until you get bored.

The catch with this trick is that you need to learn to grab the mechanism by the middle so that it doesn't stop. It is also desirable that the speed of rotation of your spinner is high, so that you can throw it up at least a couple of times.

Dorsal flight

One of the most effective tricks is the back-toss. It is not easy to implement. After all, the throw of the spinner will have to be carried out blindly.
Advice: throw the toy as far as possible so that it can come into your field of vision after turning your head slightly. As soon as you see it, grab the piston with a sharp motion. If the "helicopter" is mastered to perfection, it will not be difficult.

Yula

This is a fairly simple trick. It is enough just to run the spinner not on your hand, but on a flat surface (on a table or floor). After that, you can watch the fascinating dance of an unusual toy for all ages.
These tricks can keep you and your kids busy for hours. So feel free to choose the perfect spinner and go ahead - conquer the world of "spin".