Where you can sharpen the saw. We return the scissors life: Methods of fast and safe sharpening scissors sharpening manicure scissors: how to properly

Floors, tweezers, scissors belong to the tools of a manicure set, without which it is difficult to imagine the fulfillment of the obscure manicure or pedicure at home. The blades of each tool must be sharp, smooth, without gaps in order to qualitatively and safely remove the burned layer of the cuticle, to give the free edge of the nail plate the desired form. Even professional manicure tools from famous brands through some time begin to tear off pieces instead of cutting out the novel / cuticle. And the cutting tools from ordinary sets for manicure / pedicure are subject to sharpening immediately after purchase.

There are three options for solving this problem.
FirstlyIt is possible to use the services of an individual master-sharpening, which comes to the client to the house and seals the cutting parts of the bustard, tweezers and scissors with a manual method. As a rule, the master works in diamond monolayer (with a solid diamond layer) BR.

SecondlyYou can contact the workshop where the certified specialist will perform a professional sharpening of manicure tools using a diamond circle or in a special machine. In this case, the services will cost more, but the firm gives a guarantee on its work (service life of at least 6-7 months, even with frequent use).

ThirdlyYou can seek help to the "strong half of" your family and sharpening manicure tools at home will save your family budget. And on how to cope with scissors and nippers for manicure / pedicure, you will learn from the photo and video of materials of this article.

♦ sharpening manicure bodies at home

Cold Bed blades can be added using an ordinary carbon steel file. Choose a file with homogeneous grain and firmly adjacent thin notches. We recommend to "experiment" with old nail bearings, and if you have an expensive professional tool, it is best to seek help to an experienced specialist.


- In the photo: "cheek", "heel" and a joint (hinge) of a bodie

❶ Schedule.
Open the nippers, take in one handle and shocked from side to the side. If there is a backlash, then put the tool to the desktop, we put the rod on the riveting of the hinge compound and tapping the hammer (not strongly), constantly checking the result;

❷ Cleaning the hinge connection.
Fully reveal the nippers and with the help of a folded piece of sandpaper, we clean the junction of the joint first on one side of the tool, then on the other;

❸ Sharpening the entire plane of the blade.
Open nippers put the cheek on the table and smooth unidirectional freight movements with grind the inner cutting edge;

❹ Sharpening corners of the blade.
We put the pads on the cheek parallel to the table edge line and smooth unidirectional movements of the file with grinding the corner of the cutting edge;

❺ Sharpening external cutting edges.
Now it is necessary to squeeze the nippers and put on the table so that the connected cutting edges are upstairs. Spin the external cutting edges along the connection line with reciprocal movements of the file;

❻ Grinding "cheeks".
Alternately grind the "cheeks" by unidirectional movements of the file;

❼ Polishing and lubrication.
At the end of the work "Walk" to the cutting edges of each blade by polishing Bru (8000 grit) so that they become smooth and smooth. After that, you can lubricate the hinge joint of the oil.

♦ sharpening manicure scissors at home

For work, prepare two grinding stones with an abrasiveness of 600 grit and 1500 grit.


- In the photo: the joint, cutting edge, side and upper plane of the scissors blades.

❶ Schedule.
We put the scissors with sharp edges upwards, put the score of a small size on the rivet and hit the hammer on the bid. The backlash gradually eliminates, so as not to flatten the rivet too much by one blow;


❷ Lubrication.
After removing the backup, you can lubricate the joint of the tool on both sides to the stroke of the blades is free and smooth;


❸ Sharpening blades stone 600 grit.
We fix the opened scissors on a stable surface and drag the cutting edge from the side of the upper plane of the blade, moving a grinding stone 600 grit in one direction (on yourself). First we work with one blade, then go to the second;

❹ Polishing blades stone 1500 grit.
A stone of 1500 grit is moving in one direction (on ourselves), eliminating scratches after sharpening and making the cutting edge of each blade smooth;


❺ The tips of the blades.
After sharpening, one tip of the blade can slightly move away from the other. So that the tips firmly fit to each other, one of them should be slightly adjusted with pliers;


❻ Check.
Tension a sheet of printer paper between your fingers and try cutting it in the middle of the sharpened scissors. The incision should turn out to be smooth, without the "stuffy" edges.

♦ Sharpening a manicure tool with a sharpening circle

On the grinding machine you can sharpen the instrument quickly and efficiently. Of course, you must have experience in such equipment, as you can easily injure your hands while rotating the circle. It is best to sharpen the blades of a manicure tool on a sharpening circle with fine-grained diamond spraying.


❶ Lishe eliminating at the very beginning of work. To do this, take a durable rod, place one end at the connection point of the blades, and on the second end, tapping the hammer (not strongly), checking the work time of the instrument from time to time;

❷ First, drag the blades from the inside, and then with the outer (taking into account the cutting angle). Install the minimum speed of the diamond circle in the machine. We spend on the rotating circle the edge of the blade in one direction (from the beginning to the end, the contact stain is not more than 0.3 mm);

❸ Turn off the machine, wipe the tool and using a polishing bar with an abrasiveness of 8000 grit align the edges of the blade, polished in the machine.

♦ How to check the quality of sharpening?

Scissors.
The cutting surface of the tool after performing sharpening should be smooth, and the edge of each blade is smooth. Be sure to check the stroke of the blades and make sure that the backlash is completely absent, but the blades are closed / opened smoothly, at the same time, without too much effort.

Test: Take a printer paper sheet (or a piece of tape), tension between your fingers. The sharpened scissors blades cut the strained canvas in the middle. If the paper remains a clear incision without broken, not stabbed edges, then the tool is ready for operation.

Locks and tweezers for the cuticle.
Make sure the edges of the blades from two sides are smooth and smooth, and there is no gap between the cutting edges. Take the handle tool and slightly move up / down. If you find the backstage in the joint of the bustard, then be sure to ask the masters to eliminate it, since during the edged manicure you can be painted with sharp blades of olock rollers.

Test: Take a piece of a dense polyethylene package, tension between your fingers and make a cut with sharpened laying. The edges of the cut should be clear and smooth.

♦ Video materials

Many people prefer to throw out scissors who have already fucked. But it is better to know how to sharpen scissors, and thus significantly save on their purchase.

After all, now on the shelves of the store can only be purchased by modern Chinese unreliable fakes.

Easy to sharpen the stationery and shearing scissors. Much harder to sharpen a manicure set. Before you descend them, you need to make sure that the malfunction is related to the bunge.

It is possible that they simply loosen the fastening axis, where the bolt or simple rivet is mainly used. Just tighten the bolt.

If the screw is tightly tightened, and the scissors do not really cut the scissors, then patch the heel limiter, which is located near the bolt hole.

Do not try to close the blades, so you will aggravate the situation.

If a rivet is applied in the connection site, then wait for it. But before this, open the scissors and put on any metal object.

Then, using a beard, flatten the rivet and check how well the blades are closed.

If after the proceeds done, nothing has changed, then the scissors will need to be molded at home.

Procedure

In order to sharpen scissors, it is required to use a grinding stone. It can be purchased in many business stores.

Most variants of stones have two different directions, one of which is fine-grained, and the other is rude. First you need to take advantage of the rude side.

How to put the scissors yourself? The algorithm includes several steps.

1. Put the grinding stone on the fabric and wash the water slightly.
2. If a bolt is used as an attachment on scissors, then disassemble them. If the rivet is used, then the blades are wider as wide as possible.
3. Follow the factory sharpening tilt. Do not change it. It is necessary to lay the blade so that its plane leaked from itself.
4. Make sure that the chamfer is parallel to the surface of the bar.
5. Incut the scissors correctly, slowly drive the blades along their entire length and only one way.
6. As soon as you have sought them on the rough side of the stone, take sharpening on the other side. Do the same actions.

Having finished with sharpening, check the scissors on a piece of fabric. If they are well sharpened, then the material on weight will cut smoothly.

Sharpening manicure scissors: how to

To make manicure scissors correctly, it is required to use a small bar having a fine grain.

Preferences give to sharpening stones with a diamond crumb.

Manicure scissors can be sharpened in the same way as simple. But it should be done as careful.

This is especially true of the sharpening of the cutting chamfer, as it differs from others.

If you have a manicure scissors that have curved blades, it is easier to buy new ones.

The only thing that can be corrected in them is a bolt.

How to make garden scissors

To make garden scissors independently, it is required to disassemble them.

1. To begin with, unwind them. It will be required for casing of blades along the entire length.
2. To sharpen the lower concave canvas, use grinding stone The radius of which is not more than 3.5 cm.

All other actions are similar to those described above.

Fast Methods

In order not to spend time on the analysis and the sharpness of the presented tool, you can take advantage of the following ways.

1. Sandpaper. Find a small piece of this material, fold it in half, while the lifting side should look up. Start cutting paper, about 15 lanes. In the same way, you can use abrasive material on fabric, cotton wool.
2. Aluminium foil. Take a leaf size up to 25 cm and fold it several times. Then begin to cut it.
3. Glass jar or bottle. If you want to make a small scissors, you can use the bottle throat. Place the outdoor scissors in the throat and start to connect rings gently.
4. Cutting sewing needles. It will help to make manicure scissors.

How to use the tool

To presented the tool for a long time saved its sharpness, you should adhere to some recommendations.

1. If you use tissue cutting scissors, then use the tool only for this purpose. I do not need to cut the fish, cardboard and other items.
2. For cutting of lightning and metal threads, other scissors are used.
3. If you use them when cooking food, to care for plants and nails, then regularly disinfect them.

The main thing is not to boil the scissors, but process the simply antiseptic. Otherwise, they are quickly blunting and rusted. Do not forget to lubricate them every six months.

Numerous manufacturers of male accessories and razor accessories offer machines disposable and reusable with blades from high-quality materials. But sooner or later, any blade will begin to lose its properties, especially if you do not provide a decent care machine, proper exploitation and storage. In this regard, experts offer a lot of techniques, how to put the machine blades, many of them can be applied at home.

Many men know how to sharpen the razor machine at home, since many years have been practiced several old ways. To date, many new ideas are invented, which also quickly and freely sharpen blades, extending their service life. It is only important to observe all the subtleties and instructions, otherwise it is possible to damage the sharp cutting surface.

Many men believe that sharpening blades for the machine are unlikely or at all useless occupation. Especially considering the fact that in stores on sale there is a huge range of new blades and cassettes. In fact, high-quality razor machines cost big money, like blades for such models. Therefore, experts recommend save money and sharpen blades, unless, of course, do not use a cheap one-time razor.

Did you have a shaving machine ever?

YesNot

Only a few types of razors can be stuck in such ways:

• disposable machine;
• reusable razors with cassettes;
• T shaped machines.

If, in addition to the right application and care to sharpen the blades, a man will be able to secure a high-quality wet shave and save money on the purchase of a machine or blades. Otherwise, the blades will not only be bad to cut the hairs and pull them out, but also scrape the top layer of the skin. An important condition for sharpening is to comply with the instructions in all stages, otherwise it is possible to fix the cutting surface to the cutting surface.

For reference! If a man does not have skills and knowledge, how to sharpen the razor blades, you can contact a specialist who has a razor blades and other devices for professional sharpening in the arsenal.

Phased guide

To date, the most relevant inquiry from men in forums and communities is as follows - how to make a razor blade vest. This manufacturer offers high-quality machines with replaceable cassettes, which can be easily extended by the shelf life itself, without the help of a specialist. Most often, two adaptations are practiced for such actions - this is a sharpener for the razor blades pyramid or ordinary denim tissue.

The pyramid can be made independently from a material that is unable to magnify, for example, plexiglas or cardboard. With the help of glue or tape it, it is fixed, the metal fastener is prohibited. Next sharpening is made as follows:

• mark the pyramid on a solid straight surface;
• next, the pyramid is oriented on the sides of the world;
• the blades of the razor must be put along the pyramid in the direction of North-South;
• the blades should fly in such a state under the pyramid of 6-8 hours.

In the same way, you can sharpen blades for cassette razors, such as Jillette and other brands.

Many men have successfully practiced a technique for many years, noting its ease of use and high efficiency. With a special device from Razorpit or Zattoch blades on a tape or removable blades accurately as follows:

• a little gel for shaving is applied to the surface of the device;
• further on the abrasive surface, but in the opposite direction, as during shaving, perform the movement of the machine;
• at a time they make 25-30 such movements;
• at the end of the machine and the working device will need to rinse with water.

It will be enough to just 5-10 minutes of such manipulations to reanimate the machine blades and give a cordless tool to the second life. This will not only save funds, but also provide a man with high-quality and efficient shaving of bristles and mustache without irritation and other consequences.

Scientific means to help

If a man is not suitable such a device as a sharpener for razor machines, you can use undergraduate tools, such as a denim. This is one of the first methods that was invented by men many years ago. It is enough to simply turn out the fabric inside out, after which it is possible to spend the machine with blades inside against the direction of the filament of the tissue of the fabric 30-40 times, but without pressing.

Another girlfriend is a leather belt, with the sharpening blades occurs on the same scenario as with a denim. It is necessary to choose such a belt, which will not be shabby sites and elevations, otherwise the blades surface will be broken. You need to move the blades on the belt from its wrong side. This will allow you to maintain the integrity of the painted side of the belt and at the same time improve the functionality of the machine.

Is it important to use special fixtures?

In fact, any selected sharpener for razor machines must be approved by experts, as a leather belt, a pyramid or denim fabric. Other unfamiliar techniques and untested techniques can easily damage the integrity of the blades, as we are talking about a metal plate with a thickness of 0.5 mm and less. Despite the fact that the Internet sells many sharpeners for razors, only the units are really coping with this.

Output

Shaving accessories all have their own service life, which depends on the materials of the production of the machine itself and the quality of the blades in it. Disposable machines use no more than 1-3 times, but t tall razors and reusable machines will serve longer if you change the cutting parts on time. And in order not to spend money on the purchase of new feathers, it is possible to fulfill them in a timely manner. To do this, you may need a special device, as well as a pyramid of girlfriend, leather strap or denim.

Scissors are in the kitchen second by frequency of use by cutting object after knife. Without them, it is rather difficult to separate the fish, some parts of bird carcasses, etc. But, unlike the specified "King of the kitchen", the zone of their use comes far beyond the boundaries of this territory. After all, the scissors are also gardening, portno, manicure, hairdressers, etc. Depending on their purpose, they have a different shape and size. With frequent use, the blades take place. Therefore, it is necessary to think: is it possible and how to put the scissors at home? The tips presented in this article will solve this problem. Surely some of them will be useful due to their simplicity and availability of application, and they will be used by hostesses if necessary.

The first method: how to spend a pre-sharpening "on the ambulance hand"

It is possible that at hand there are no special materials or appropriate fixtures for sharpening. In addition, it is necessary to solve the problem quickly and immediately. After all, there are such situations, for example, when you need to urgently do a dress, and the scissors began to "chew" fabric. In this case, in this case, the usual needle and how to cut it, conducting blades with some effort. You can use a thin glass object for these purposes (neck from the bottle) or some iron rod. Of course, this method, how to mold scissors does not provide 100% quality result. But for some time you can still feel in practice the tangible sharpness of the blades.

The method of the second: how to put the scissors using sandpaper

The technology of work will be similar to the advice described above. To do this, take a small piece of the emery canvase and explore it with scissors in different directions. You can also lick the blade to the specified material, slightly pressed from above. It is necessary to use coarse-grained material that is easier to carry out processing. Be sure to take into account when working, it is necessary that the zone for sharpening is the outer edges of the scissors. You can not rub the inner surface, otherwise you can not "cure" tool, but spoil. Two data of the option, how to make scissors, are quite simple and available. But that other ways can be used to be better.

The third way: use a file

There are special bars that can be accurate not only but also scissors. These also include various blades for processing spend several times on the specified object that lies on a flat surface. One hand needs to press the bar to the table, and the other is to move with scissors (leaning the outer side of the tip) in the direction of the handles to the ends. A little differently act when using a file. To make a good scissors, it will take some time. In one hand (working), the file is kept behind the handle, to the other - open scissors. You can quit asleep for support in any non-slip surface. After several movements, carefully try the sharpness of the blade surface with your finger.

Four way: how to put the scissors using special devices and devices

Fixtures for processing exist several species. First of all, it is, of course, special machines. By easy pressing of the blade to the spinning disk and sharpening happens. Of course, this requires a certain skill and skill. There is also a danger to damage your fingers, so in no case cannot be allowed to work on these children's devices. A simpler and very comfortable device, especially for direct use by women - sharpener for knives and scissors sold in supermarkets and shopping stores. Only one movement - and the blades will be sharp without any additional processing. Therefore, to have a hostess at hand such an item will be very useful.

Sharpening in several stages

So, having studied all the options described, after all how to proper scissors? If there is no special factory equipment in the home use, it is recommended to be carried out in several stages to get the best result. To do this, before machining, remove the accumulated dirt from the blades with a cotton piece or a rag moistened in the solvent. Depending on the purpose of the scissors, it may be land, the remnants of products, paint, fine tissue dust, etc. Removing a foreign layer will provide a better result. Then use the file first or coarse bar. After that, to secure the result, use rough emery paper, and then small. And in conclusion, slightly tighten the bolt, tightening the blades. After all, it may have been the main reason that the scissors do not want to "obey" the master.

Everything! The gun is ready to work!