Those who have a creative imagination and like to decorate the house with their own hand-made things in their free time have several advantages over the rest.

1. What is the advantage
2. From fabric
3. From paper
4. From threads
5. Other solutions

What is the advantage

• The opportunity to save money. A unique author's product will be obtained free of charge or you will need to purchase a small amount of materials, which is several times less than the cost of a finished product purchased in a store.

• A way to express your individuality, to invent and make extraordinary, unlike typical, interior items, for example, lampshades for chandeliers, with your own hands;

• Working together with young children will help attract them to work, spend productive weekends together, and show creativity.

• Putting your soul and positive energy into your creation, you can make a wonderful gift to your family, especially mothers and grandmothers will be happy with it, as it will become a pleasant reminder of your beloved children or grandchildren.

From fabric

Even those who have not learned the rules of sewing and do not have a sewing machine at home will be able to decorate the chandelier with the remainder of a beautiful fabric. It is good if there is the same material in the house as on the upholstery of upholstered furniture or curtains. Then the lamp will become part of the overall interior decoration.

A bright plafond will decorate the kitchen, country house, children's room. Its manufacturing technology is very simple. Thanks to her, it will have a neat appearance both from the outside and from the seamy side of the product. For work, you need to stock up on a suitable cloth, scissors, double-sided tape, thread and a needle.

• Remove the old covering from the unnecessary chandelier, leaving the frame.

• Prepare even strips from the fabric of the future product. To do this, at regular intervals, approximately 3 - 5 cm along the warp threads, make incisions and tear the fabric with quick movements.

• Then iron the strips and cut off the excess threads, carefully decorating the edges. The length of the strips can be different, the longer the better, because fewer connections are required.

• Starting the process of shade formation, one of the strips should be fixed on the upper ring of the frame with a needle and thread.

• Gradually wind the fixed strip around the upper and lower rings of the frame, overlapping each subsequent layer with the previous one. When the first strip is over, sew the next one to it from the wrong side and continue.

• In order for the luminaire to have a finished look, the lower and upper edges of the plafond should be decorated. To do this, cut a 14 cm wide strip from a contrasting fabric.

• Tuck one edge 2 cm and iron.

  Glue double-sided tape from the inside.

• Then glue the finishing tape to the shade, gradually removing the protective layer from the tape, at the same time wrapping it on the inside.

• Similarly to the upper one, trim the lower edge of the plafond. Cut off the excess part of the material.

Thus, with this master class, it is not difficult to update an old chandelier.

From paper

Another way to show your imagination and at the same time usefully spend your free time is the opportunity to make a shade of paper.

To do this, you need to cut strips of white, colored paper, thin cardboard or plain newspaper. Then arrange them into a product, laying the strips at random, winding them symmetrically relative to the central part of the chandelier, as can be seen in the photo.

Periodically, in places of contact, apply glue and form a stable structure.

From threads

Quite simple to manufacture and effective in working order is a shade made of threads.

How to update a table lamp with your own hands: 37 ideas for a lampshade

The proposed instruction will tell you how to make an original lamp from scraps of colored yarn.

1. For work, prepare a rubber ball according to the desired size of the lamp, scissors, glue, threads.
2. Inflate the ball and wind the threads, crossing them in an arbitrary direction, leaving free gaps.
3. When finished, apply clear glue to the surface.
4. Without waiting for complete drying, carefully cut a hole, which will later be necessary for screwing in the lamp, deflate and remove the ball.

Other solutions

People with non-standard thinking, creative imagination will not throw away unnecessary things, from which it is quite possible to build an original lamp. For example,

• from a plastic bottle and disposable spoons;

• from metal gears and parts;

A unique, original decoration of the room and the surprise of guests from an exclusive plafond will be provided.

See also: DIY wood chandelier, Which lamps are better for stretch ceilings

A minimum of material and a modest skill in craftsmanship is all that is required to give a new look to an old table lamp.

The shade of your favorite lamp has faded and is no longer pleasing to the eyes!

Replace it with a new one.

Ideas and master classes for making lampshades with your own hands for a floor lamp and a table lamp

And making it is not difficult at all, covering the fittings of the old lampshade with a fabric with a pattern you like or a piece of wallpaper left after repair.

The use of self-adhesive paper (with a protective film) for making the lampshade simplifies the "production" process. Such paper is sold both in rolls and in the form of separate sheets.

If self-adhesive paper is not available, self-adhesive transparent film can be dispensed with. It is especially effective for gluing the covering of wallpaper lampshades.

To make a new lampshade, you will need: self-adhesive paper with a protective film, a steel ruler, covering material, tape for trimming the edges, duct tape, universal glue, frame rings, clothespins.

How to make a lampshade pattern

The dimensions of the lampshade are determined by the diameters of the large and small rings of the frame. The marking of the pattern for the covering is done as follows. First, a segment AB is drawn on a sheet of plain paper of a suitable format, the length of which is equal to the diameter of the lower ring. A perpendicular is restored from the center Z of this segment and point Y is marked on it - the height of the future lampshade. She is chosen at will. Then, through point Y, a segment CD equal to the diameter of the upper ring is drawn parallel to AB.

The wrap pattern should be in the shape of a ring segment. To find its center, the segments AC and BD are extended. The point of their intersection will be the desired center X. From it, through the points A and C, the arcs of concentric circles are drawn with a compass.

The lines EG and HF that delimit a segment are the butted edges of the pattern. Their position is found as follows: the length of the segment AB is divided by the length of the segment AX, the quotient of the division is multiplied by 180 degrees. The resulting angle is plotted from the X center, halved relative to the XZ axis.

How to assemble a lampshade

Depending on the design of the lamp, the lampshade is attached to it by the lower or upper ring. For this purpose, the corresponding lamp shade ring is connected with spokes to a sleeve that is put on the base of the cartridge.

Our lampshade does not have parts that hold the rings together and determine their relative position. This function is performed by the close-fitting. Therefore, the rings must be attached exactly to its edges parallel to each other. The slightest inaccuracy - and the lampshade will warp. To prevent this from happening, before you finally assemble the lampshade, the rings must be carefully tried on.

	1. Wrap the ring with adhesive tape, sticky side outward, so that its surface is as even and smooth as possible without wrinkles.
	2. Remove the protective film from the self-adhesive paper and stick it on the fabric. Smooth the fabric to the paper.
	3. Place the pattern on the fabric, align the edge and cut out the shade shade blank along the contours.
	4. Roll the workpiece into the lampshade, insert and fasten the lower (larger) ring with clothespins. Glue the edges of the workpiece from the inside.
	5. Glue the bottom ring and squeeze the glue joint with clothespins until the glue dries. The same is done with the small (upper) ring.
	In addition, fasten the glue seam from the inside with adhesive tape. The upper and lower edges of the lampshade can be decorated with braid.

Next page: A hot-water bottle for a kettle ... Doll "Rainbow" with your own hands Previous page: Piggy bank "Little House" with your own hands

Today I will show you how you can breathe new life into old things. It's about a Soviet floor lamp. In truth, even in its best years, it was a completely ordinary and unremarkable lighting fixture.

How to restore an old floor lamp with your own hands

Of course, you could just cover it with white paint, but we are not looking for easy ways. We will radically change the design of the item. So, to restore the floor lamp we need:

1.Gold acrylic paint in a spray can;
2. polymer glue (I used DRAGON);
3. brush;
4. satin and gold braid (they can be purchased in stores specializing in the sale of fabrics and sewing accessories);
5. threads in the color of satin and a needle;
6.Gold acrylic paint for painting on fabric. They are made on the basis of an aqueous acrylic dispersion, so they do not stink either during painting or after drying. I recommend using Javana (Germany) or Decola (St. Petersburg) paints. Read the instructions carefully and follow all safety precautions during operation.

As a result, I spent $ 10 on materials for the restoration of the floor lamp. As for me, it is much cheaper than buying a new one.

With a leg from a floor lamp, everything is simple. We spray paint from a spray can in 2-3 layers.

How to make a DIY lampshade from fabric

In order for the paint to dry properly and not drip down, take a break before applying each new layer for 15-20 minutes. Do not bring the can to the base of the floor lamp closer than 30 cm, otherwise the paint will lie unevenly. It is better to do this on the street or balcony, because the smell from the paint until it dries up will be sharp and unpleasant.

Then everything is a little more complicated. We lay out the atlas on the floor, put the lampshade on it in the center sideways. Carefully roll it first in one direction and then in the other direction, at the same time we outline the outline of the future product. I did it with chalk because the fabric was dark, you can use a pencil. Cut out the resulting shape, leaving 2 cm on each side for allowances.

Then we proceed to painting. The pattern can also be pre-applied with a pencil or chalk. It is unlikely that it will be possible to completely block the color and texture of the fabric the first time, so you will most likely have to apply the paint in 2 layers.

Well, the last stage in the restoration of the floor lamp is the assembly of the product. A new fabric lampshade must be sewn with a seam forward with a needle and put on the old base, it is better to fix it from above and below with polymer glue. We carefully sew the braid on top. We attach the lampshade to the base. That's it, our restored floor lamp is ready.

You can skip reading the entries and leave a comment. Posting links is prohibited.

How to make a lampshade with your own hands and a frame for it - on a floor lamp, beautiful from paper + interesting video

1. How to make a beautiful DIY lampshade out of paper
2. How to make a lampshade for a floor lamp with your own hands
3. What can you make a lampshade
4. How to make a frame for a lampshade with your own hands

Fortunately, you don't have to buy a lamp just because of the beautiful lampshade, as you can do it yourself.

Yes, such that it will cost less than buying a floor lamp, and at the same time it will be much more beautiful. And now Infosborka.ru will teach you how.

How to make a beautiful DIY lampshade out of paper, which can be used as a lamp

You need

• Long stem glass
• Candle
• Rope - can be twisted from thread
• Lace with tassel at the end
• Decorative ribbon
• Scotch
• Scissors
• Transparent paper with decorative patterns
• A little sand

Manufacturing process:

1. Make a template from plain A4 paper.

2. Place the template on transparent decorative paper with a pattern and trace around it with a pencil. Then cut out the resulting image.

3. Glue the decorative tape to the edge of the paper.

4. Tape the rope with a tassel at the end of the back of the paper.

5. Glue the side ends of the paper together.

6. Tie a string to the stem of the glass.

7. Wrap it around the leg as shown in the picture below.

8. Pour sand into the glass, put a candle on top and light it.

9. Put on the made dome on the glass.

And here is such a beautiful lamp shade with a lamp.

How to make a lampshade for a floor lamp with your own hands

You need

• Patterned paper
• Decorative paper
• Awl with which you will poke holes on the future lampshade
• Glue and brush
• Scotch
• Tape in the color of decorative paper
• Clamps
• Lampshade frame

In our case, the frame for the lampshade consists of two parts:

Manufacturing process

1. Tape the patterned paper to the wrong side of the decorative paper.

2. Make holes with an awl along the contour of the drawing.

Needlework for home

As a result, it turns out like this:

3. Wrap the paper around the first part of the frame.

4. Mark with a pencil the line along which you will glue the decorative paper.

5. Glue the paper with glue.

6. Coat the bottom of the resulting cylinder with glue and glue the second part of the frame to it.

To make it stick, press it down with clamps.

In the same way, glue the first part of the frame to the top of the lampshade.

9. Glue the tape to the upper part of the lampshade. This is done like this:

• smear a small piece (five centimeters)
• glue and clamp with clamps
• then coat with glue and glue the next piece, etc., until you glue the entire tape

10. Bend the tape so that it covers the frame, and glue it.

As a result, you will get such a lampshade for a floor lamp:

Using this technology, you can make any drawing.

What can you make a lampshade

• Beaded lampshade
• Lampshade from plastic bottles
• Wicker lampshade in Provence style
• Organza or thread lampshade - you can make a hanging version

We will tell you how to make them in the following materials, but now I would like to tell you about ...

How to make a frame for a lampshade with your own hands

You need

• Welded wire - 3 length is selected, focusing on the height of the lampshade. In this case, do not forget to add 3-4 cm for the connection.
• The upper part is from a jar of vitamins, the neck of which will fit into the ceiling right next to it.
• Spring for returning the cord from the vacuum cleaner.
• Soldering iron.
• An object that can poke holes (awl, nail, etc.)
• Pliers

Manufacturing process

1. Make a circle of the required diameter from the return spring of the cord from the vacuum cleaner. Solder the ends.
2. Make three holes in the neck of the vitamin jar and in the circle made. The holes on each item should be approximately the same distance from each other.
3. Push the welded wires into the holes and bend their ends with pliers so that they do not come off.

In the end, this is what you should get:

To relax a little after the information you have learned, here is a video for you on how to make a candle from an incandescent light bulb:

Don't switch. Soon there will be a continuation of the theme of a lampshade with your own hands. Using these links, you can switch to the second and third parts of the article.

Lighting is the most important component of the interior. The comfort and level of comfort of our home depends on the lighting. The play of light and shadow allows you to play up the winning moments of the interior and divert attention from unfortunate moments. And also - lamps, floor lamps, chandeliers and lamps create the atmosphere that we call "home". Unique lamps and the best way is to make a lampshade with your own hands to make your home only "your", personal, individual. Homemade shades and lampshades are the strong point that will make your home stand out from others.

A few words about safety

In the manufacture of lamps, floor lamps and chandeliers in industrial conditions, a preliminary calculation is made of the minimum distance from the "body" of the lamp to the materials. This distance depends on the power and thermal radiation of the lamp and on the type (combustibility) of the material from which the shade / lampshade is made. At home, hardly anyone will bother with such calculations. And in order not to create a dangerous situation, it is worth adhering to certain rules.

And in general, having made a lampshade and installing it, in the first few days, pay attention to whether the ceiling is warming up. Any rise in temperature above ambient is considered heat. If the shade feels warm, change the bulb to a less powerful one. Check again. So until the homemade lampshade is warm.

Where to get the frame

If you want to remake an old lamp, floor lamp, sconces whose old lampshade has become unusable, you can simply use the existing base, peeling off the old material. Before starting work, inspect the frame well, if there is rust or damaged coating somewhere, maybe it is worth peeling and painting everything again? At the same time, the color can be changed. If there are no old frames, you can buy an inexpensive lamp (at a store or at a flea market) and do the same with it. Quite good lampshades can, by the way, be made from waste baskets. They are wire, there are plastic. The main thing is to find the right one in shape and size. Then in the bottom you make a hole for the cartridge. Further - it's up to the decoration / cladding, and then there are a lot of options.

If this method is not available, you can make a lampshade without a frame (there are some) or make a frame yourself. The material for making a frame for a lampshade with your own hands is: wire, wood (wooden or bamboo sticks, specially cut elements), plastic bottles.

How to make a wire frame for a homemade lampshade

The wire for the lamp frame needs aluminum or steel. Aluminum is easy to work with, but it wrinkles easily. This is not very important when the lampshade is already in use, but this fact must be taken into account during operation: you can ruin the shape. On the other hand, such plasticity makes it easy and simple to make changes to the shape during operation. So it's not a bad option. Aluminum wire can be obtained from electrical cables. You will have to remove the protective shell and you can use it.

Steel wire is more elastic so that it retains its shape well. You can search for it in the construction market. Working with her is more difficult. It is desirable to have strong male hands nearby.

In addition to the wire, you will need powerful wire cutters and pliers for work. The frame of a lampshade usually consists of two rings and posts connecting them. The shape of the future lampshade depends on the size of the rings and the shape of the racks. Questions may arise about the number of racks and how they are attached. The number of posts depends on the size of the rings and how “round” you want the lampshade. The more racks there are, the smoother the fabric will lie. So it's up to you to choose, but the optimal distance between the posts along the lower circle is about 5-6 cm.

Techniques for creating a frame for a wire lampshade

How you attach the stack to the rings of your lampshade depends on the thickness and type of wire and the tools you have. The easiest way is to make a small hook at the end, then clamp it tightly. And so that the ring does not slide left and right, pre-process the wire at the attachment point with coarse-grained sandpaper. This is an option for thick aluminum wires. If the wire is steel, with a diameter of 1.2-2 mm or more, the best way is. The thinner wire can be bent and wrapped around the ring, or you can also make a hook.

If you make hooks, wrap the wire, the appearance is far from being as ideal as that of factory frames. But this imperfection will be covered by the lampshade itself. If you still care about it, find a ribbon of a suitable color (usually matched to the color of the lampshade) and carefully wrap the resulting frame. It will get much better. The tape can be coated with PVA glue and, wet, tightly, turn by turn, wrap the frame.

Wire mesh

If you can find a thin wire mesh, you can quickly make an almost perfect cylindrical shade for a floor lamp, table lamp, night light, candle shade, etc. All you need is to cut off a piece of mesh of the required length and width, roll it into a ring and fix the wires by wrapping them around the racks.

To prevent the mesh from straightening when cutting a piece, cut so that there are long loose ends on both sides. They will be used to fasten the cylindrical shade. And the imperfection of the upper and lower rings can be masked with a tape of the desired color.

From a five liter plastic bottle

An interesting shape of a lampshade can be obtained from a large-capacity plastic bottle. There are bottles of 5-6 liters and even 10. So they can be used. Cut off the top or bottom from the container - depending on what you like best. In the cut off part, we make a ring for the cartridge. If the top is cut off, the neck can be used for some cartridges. For those with a larger diameter, it will have to be cut off.

Then we cut out the excess plastic, form the rims and stands of the plafond. In order not to be mistaken, you can first draw all the lines with a marker. It will be easier to cut. Everything is elementary. Then we just decorate. And yes, it is imperative to cut out the plastic, otherwise the warm air will have nowhere to go.

We make lampshades on the frame

There are enough options for how you can make a lampshade cover:

From ribbons

The easiest and quickest way to convert an old lamp shade to a floor lamp or table lamp is to use ribbons. You need a frame or a lampshade in the form of a cylinder. It can be “naked” or covered in fabric. If you use a "bare" wireframe, light will filter through the slits, which will create interesting lighting effects, but the lighting will be uneven. It is inconvenient to read in this light - this is an interior solution. If you need even lighting, wrap the fabric over the frame first. It can be the same color as the ribbons, a couple of tones darker or lighter, it can be contrasting. It all depends on your desire. And remember that the darker the fabric, the less light the lampshade lets through.

We take a tape with a width of 1-2.5 cm. We fix it from the seamy side of the lampshade using PVA glue, additionally fixing it with a pin. If we took a wire frame without fabric, we attach it to the upper or lower rim (you can sew it with your hands, you can use glue). Then we begin to wrap the entire frame, from top to bottom, placing the turns of the tape close to each other, but without overlap.

Having finished the circle, unfold the tape 90 °. We fix it in this position (with a needle and thread or PVA glue, glue from a pistol, temporarily fixing it with a pin, pressing it with a clothespin). Then we pass the tape under the first tape, take it out, put it on top of the second one, then pull it down again, pull it up through one tape. So, gradually, we create a weave, filling in the entire lampshade.

Alternatively, you can skip two vertical belts. But then you need to make sure that each next row is shifted by one crossbar. Then you get a different type of weave. Such a lampshade is ideal for floor lamps, as it will direct the light downward, and the dispersion through the walls will be small.

In this version, the ribbons can be the same, they can be of the same color, but of different textures, they can differ by a couple of tones or be contrasting. The tapes can be run in a continuous circle around the circle, or after a certain distance. If you find a wide tape and overlap it, then you won't need horizontal ones at all. And if you use a braided or twisted cord (in the lower photo on the right), we get a completely different lampshade. So only this technique of finishing the lampshade gives a lot of options.

Let's briefly present the ideas. There are many options for how you can customize standard lampshade frames. The first method has already been announced: you can knit a lamp shade cover on knitting needles or crochet. Several options in the photo.

Not everyone knows how to knit. It's easier to work with beads, especially if you glue them. You can decorate old fabric with beads, sequins, beads of different shapes and sizes. You can make such a "new-old" lampshade with your own hands in a couple of hours. Pick up jewelry that matches the color, coat the fabric with PVA glue, glue the jewelry. To complete the look, you can assemble pendants from beads and beads that are attached to the lower rim, but this is already painstaking work. The effect is interesting though.

You can sew a new fabric lampshade. But it is not necessary to make it an updated copy of the old one. Fantasy should be included! If the lamp or floor lamp is in the girls' room, a new lamp shade cover can be made in the form of a skirt. You choose the style of the skirt yourself. They look interesting in the fold. With and without ruffles.

An old geographic map can be used in the boy's room. They are on thick paper. If the paper is not thick enough, first you need to glue the card onto the cardboard, and then glue the lampshade from such a blank.

Original shades are obtained if the finished frame is braided with threads or ropes. The ropes can be natural. In this case, they are gray, brown beige. Thin synthetic colored cords can be found. From them you will get more "fun" in color products. The situation is even simpler with knitting threads. They are thin, thick, textured, with a smoothly changing color. In general, there are a lot of options.

We take the frame and weave it according to a certain pattern. You can start with the racks. Braid each rack with a pigtail (the length of the threads should be 3 times the height of the rack). When this work is over, we begin to stretch the threads / ropes between the posts. They will need to be passed through the pigtails, so with threads it is more convenient to do this with a needle, and the ropes can be inserted like that.

The second option is to first entangle the entire frame horizontally, and then braid the racks. The pigtail will no longer work here, you just need to fix the turns on the rack with inclined stitches with a certain inclination. This version is somewhat simpler in execution, but the "pigtails" look more decorative.

Homemade shades without a frame

Many materials are tough enough to hold their shape on their own and, at the same time, they are flexible enough to make something interesting out of them. Well, there are a lot of such homemade lampshades. And almost all of them are worth your attention. We will give here only a part, the other part will go in the section with photos (see below).

From knitted lace napkins

Many people have crocheted napkins and they lie in the "stash boxes", as it is a pity to throw it away, and do not know how to use it. There is a very interesting idea - to make of them a lampshade for a chandelier on a suspension. In addition to napkins, you will need a large balloon or a bouncy ball, glue for heavy wallpaper (vinyl, silkscreen, etc.), a brush.

Soak the glue according to the instructions, wait until it swells. We inflate the ball or take the ball, hang it up. When the glue is ready, lay out a napkin on some clean surface, coat it with glue, put it on a ball.

It is necessary to spread it on such a condition that a hole for the cartridge remains in the center. Glue the napkins one by one. They should be laid out so that the edges overlap slightly. When all the napkins are laid, we coat them with glue again and leave to dry. When the glue is dry, blow off the ball or ball (the ball can be punctured, if not sorry) and take it out through the hole. That's all, the lace lampshade is ready.

In some cases, problems arise with how to hang the finished lampshade on the cartridge. The problem is solved simply - take a transparent plastic bottle, cut off its neck, if necessary, expand the hole to the desired size (so that it fits tightly on the cartridge), then cut off the plastic so that you get a ring 5-7 cm wide.You coat this ring with PVA glue , and from the inside of the ball you glue it to the lampshade.

Round shades made of threads

Practically the same technology can be used to make round and semicircular stylish shades. Choose a thread of a suitable color. Their composition is absolutely unimportant - the color, thickness and texture are important. They can be shaggy, smooth, twisted, thinner and thicker. The appearance depends on it. It is most convenient to work with medium-thick cotton threads. They absorb glue well and then, after drying, keep their shape perfectly.

You will also need a ball or a ball. This will be the base of the lampshade that defines the shape. The dimensions of the base are selected at will. The threads will need to be glued, for this you need PVA glue. It is poured into a container, diluted with water in a 1: 1 ratio.

Other glue can be used as well. It is important that it becomes transparent after drying. These are WB-29 from TYTAN Professional and D2 glue for carpentry work. If you will be using any of these types of glue, read the instructions.

Draw a circle on the ball or ball, which will be slightly smaller in size than the lamp holder. Draw a larger circle on the opposite side - this will be the lower edge of the plafond. Now everything is ready, we can proceed.

We coat the threads with glue and wind them around the ball in a chaotic manner. It is more convenient to do this if the glue is poured into a container - you can lower the entire skein there, and just slowly pull the thread. With glue in a tube, everything is not so comfortable: you have to coat areas up to a meter long, wind up, smear again. Time takes much longer. This is if you use non-PVA. But on the other hand, the products turn out to be more rigid and do not sag, do not change shape over time, as can happen with filament lampshades on PVA.

When winding threads on a ball, we carefully go around the drawn circles. If you accidentally climbed into the "forbidden territory", we simply move the threads, forming an even (more or less even) edge. When the threads run out or you decide that there is enough density, the process can be stopped. We thread the edge of the thread between others. Everything. Then we coat the ball with wound threads again with glue (PVA can be poured) and leave it to dry (at least 2 days). To prevent the ball from rolling, we find a bowl or saucepan and use it as a stand.

The last step is to blow off the ball or ball. If the ball has a nipple, press on it with a thin wire, releasing air. We take out the deflated ball. That's all, you can thread the lamp inside and test the lampshade.

The technology is the same, but the look is very different ...

Using the technology described above, you can make not only round shades. Rectangular, triangular, trapezoidal. Choose a base that is easy to remove, wind up threads dipped in glue, braid, even sticks, newspaper tubes, etc. After drying, remove the base and now, you have made a lampshade with your own hands. A couple of examples in the photo below.

You can also use sticks…. Only wrap the ball with cling film and use transparent carpentry instead of PVA glue.

It is a pasty polymer clay in a tube, which was applied to a milk bag, then dried and the bag was removed ...

Creative homemade shades for lamps, floor lamps and chandeliers

You just wonder why people don't make beautiful and unusual things. A plafond made of a cup, grater, bottle, beer or glass can, metal parts and rings from beer cans ... It seems that everything can be used ...

Old sieve shade ... stylish

Candlesticks turn into lamps ... without lampshades

You won't tell in real life, but these lampshades are made of hooks used to open metal cans for drinks and canned food ... if you paint them, it will be even more interesting

Not sure what to do with granny's crystal? Make plafonds out of it ...

Nowadays, many people strive to ensure that an atmosphere of comfort and beauty is always present in their home. As a rule, we do this with the help of various ideas that help us to decorate the house in a certain style. We also try to decorate our interior with various decorative elements, bringing some mystery and originality into it.

In this article, we will focus on such an important interior detail as a DIY lampshade. If your favorite lampshade is completely worn out, you can always decorate it, thereby breathing new life into it. You can also make it yourself for a floor lamp, night lamp, ceiling or floor light source.

Advantages

The first lampshades were created two hundred years ago. Such an interesting name came to us from the French language and in translation means "muffled light"... As a rule, they were made of leather, wood or fabric, but lampshades made of multi-colored glass and crystal were especially popular and fashionable in those days.

You can also use whatever materials you like to create this beautiful and sophisticated decor item for your lamp.

In order to decorate the lampshade for the lamp yourself, you need to choose it with a not too complicated design, so for this you will do the simplest floor lamps and night lamps. They can be both floor-standing and suspended. After all, interference with their simple mechanism from a vertical base and a round frame will not be a big problem for you.

Usually it is very easy to pick up parts for such lamps or replace them with a frame made of wire, wood or metal. The main thing is that the lamp with a lampshade is held very tightly to its structure.... At the same time, a floor lamp with a lampshade will never be damaged or fall, and you can safely move it to any place convenient for you.

Master classes with description

Making or decorating lamps with lampshades is a creative and interesting activity, and at the same time very fruitful: it gives the opportunity not only to craft a unique decor element, and in full accordance with the style of the room, but also helps to save money. You just need to buy the most uncomplicated floor lamp or night light for little money and decorate it for every taste. Various manufacturing techniques and materials will help you with this.

At home, you can create lampshades for every taste. For this you will need any serviceable night light, lamp or floor lamp, as well as the frame and base for them. The lamp should be LED or energy saving so that the material from which your lampshade will be made does not deteriorate. When making such a decor item, you must carefully observe all safety standards, because working with electricity can carry a potential threat of fire or electric shock.

Try not to use materials that can be flammable and have a toxic composition during work, so as not to harm yourself and others. A frame of any shape can also be made independently from wire or purchased ready-made in advance.

As items for finishing the lamp, you can use the most unusual things, ranging from children's toys to building materials or objects made of plastic and paper.

Made of wood

The most durable and moisture resistant are wooden lampshades that will serve you for a long time and at the same time will fit into any interior in a classic or modern style. But usually they are of great relevance for a bath or sauna. To make such a lamp out of wood with your own hands, you need a roll of paper, a simple pencil, wood and self-tapping screws.

Using these materials, you can make a corner light:

• To do this, on paper, draw a layout of the frame in the shape of a trapezoid. Please note that the side pieces must match the wall on which the luminaire will be mounted.
• Next, take wood and apply a layout drawing on it and cut it out. Wood can be treated with paint or varnish. Make a frame from three wooden planks one centimeter wide and half a centimeter thick.
• Combine the top and bottom of this frame at the sides and center. Measure from the middle to the edges and cut a few more planks of the same size. The strips must be fastened with self-tapping screws from the inside.

• You can also make a lamp from vines or dry branches. To decorate a dry twig lamp with your own hands, you will need twigs of various sizes, a lamp, a base for a lampshade, glue, paints, brushes.
• Before gluing the branches to the base, sand it with sandpaper, then wipe it with alcohol. This will make the branches stick better. Next, take the branches and glue them in a different order to the base in a circle.
• After the lampshade is completely dry, attach it to the lamp.
• To make the lamp look bright and modern, paint the twigs with silver or gold acrylic paint. By combining these shades, your lampshade will turn out in a Nordic style and will become an adornment of any interior.
• You can also add a variety of decorative items such as cones, chestnuts, feathers, artificial leaves, beads or sequins.

Weaving from vines and branches has never lost its relevance, and if there is a desire to please yourself, as well as create interesting decor items for the home, then you can do it yourself, only by studying the sequence and rules for working with such material as a vine.

For weaving a lampshade or various objects, you can use branches of all varieties. and you... This should be done in the spring before the first shoots appear on the branches, so that the product is of high quality and lasts a long time. An excellent material will be branches of willow, straw and reeds, which are also procured in advance. As a rule, this happens in the autumn season. And for a solid base of products, twigs are suitable walnut and willow.

You can select rods for the product in different sizes and make ribbons from them for decoration. You can also change the color of the product by holding it in water for some time. This will give it a more sophisticated appearance.

From paper

The advantage of a material such as paper is its availability and ease of making products of any shape. A lampshade made from newspaper tubes is one of the most popular and creative ways. To weave such a lamp shade, you will need newspapers or magazines, a bottle, scissors, glue, disc, paint or varnish.

Operating procedure:

• The tubes are harvested in advance by folding and gluing, they also need to be dried well.
• Next, we cross three tubes, put a bottle on them and weave in a spiral. Thus, the lampshade expands by superimposing the tubes on top of each other. Thus, we reach a certain size, glue and cut unnecessary tubes. After that, you need to paint and varnish the lampshade.

It will be very easy to make a paper lampshade with butterflies... You can also use various origami fakes.

The lamp frame is taken as the base of the lampshade. Next, we cut out a large number of butterflies according to the pattern and fasten them to the frame with a transparent fishing line or white thread. Such a product will look very original and will fit well into the child's room.

Any decor elements will fit to decorate a paper lampshade. Let's consider some useful ideas for decorating such lamps. To add a little flair, get some butterflies from a stationery store, or make your own. Next, attach it to your lampshade. This idea of ​​decorating a lighting fixture will appeal to any child or teenager.

An even more original idea is to decorate the lamp with special aromatic bags containing dried herbs and essential oils. This will create a romantic and cozy atmosphere in your room or bedroom.

The pleasant scent of herbs and flowers will always be present next to you.

If you are fond of collecting herbarium from flowers and leaves and decided to use them to decorate the lampshade, then you definitely cannot go wrong, creating such an unusual decor element. You just need to glue them onto the finished lamp and let the glue dry. So you can do it rustic lampshade, which will decorate any interior in the country or in the house.

Wallpaper lampshade would be a great idea. Its creation does not require large expenditures and efforts. Consider the most interesting option, made in the form of an accordion. This will require a lamp frame and wallpaper. On the section of wallpaper you need, draw stripes, the distance between which will be at least two centimeters. Then fold the wallpaper into an accordion shape and make holes on the top of the cut. Then you need to thread a lace through them to fix and glue the structure.

Another idea for creating a lampshade - from a napkin. To do this, you need to have glue, crocheted napkins and a balloon. Next, we take napkins and coat with glue, put them on a balloon and wait for them to dry completely. The ball can be pierced or lowered, and a light bulb can be attached to the resulting lampshade.

Napkins can also be made of paper. Cut them into equal parts, glue the lamp with glue and glue to its surface. You can attach a ribbon or braid to the bottom or top of the luminaire to give it a more vintage look.

From scrap materials

To make a lampshade from scrap materials, it is initially worth deciding from what means it will be made, and you also need to have a frame for the lamp. A balloon or a ball can serve as such a basis.

Another option for the material for creating the frame of the lampshade is a regular five-liter plastic bottle. To do this, you will need to cut off the top of the bottle and paint it from the inside with any light paint, and from the outside with blue or green. To make the edges of the bottle look neater, tape the edges of the bottle to match the color of your lampshade.

With your own hands you can make lampshade made of plastic cups. To do this, you need a stapler, wire, a wooden base and a lamp holder. Next, the glasses are fastened in a circle to each other, and a cartridge with a lamp and a structure made of cups are attached to a wooden base.

Such an original and practical lampshade will serve as a worthy addition to your interior.

Any material at hand can be used when decorating a lampshade. Cocktail tubes are no exception. To do this, it is necessary to prepare about two hundred straws, which are glued to the glass base of the lamp with the help of construction glue. And from finely chopped multi-colored tubes, you can make a small night light in the shape of a cube.

The easiest decoration solution is to glue the cocktail tubes vertically to make the old lamp even brighter and more beautiful.

It will not be difficult to make a lampshade made of simple galvanized wire and beads. This will require a pair of wire cutters and pliers to shape the wire into a variety of shapes. These can be curls, leaves, hearts, circles and patterns. Such a simple design will look very original. You can also make a wire base and stretch fabric or leather over it.

Cardboard lampshade do it yourself is very simple to manufacture and will differ in its unusual appearance, while it will find a place in any room. To do this, you will need to cut four frames out of durable cardboard and attach the fabric to them from the back using lacing. For this, not only ordinary threads can be used, but also various ribbons or braid.

Thus, you will get a flashlight, which must additionally be glued with glue. Then you can paint this unusual lampshade in any color and install on the lamp.

Cork or self-adhesive paper can also be great for making lampshades. First, apply silver paint to the old lamp, then glue it over with cork paper. Glue twigs of different sizes on top of them. And if you still have felt, then you can sew a new lampshade out of it. First, make a pattern for the base of the lamp, sew its parts and pull it over the base. Decorate with various appliqués.

From threads

The most sustainable option for your home would be DIY lampshade made of twine or twine. To work, you need threads of two different colors or varieties, a needle, a balloon, glue and a glass. In order for the thread to be impregnated with glue, you need to pass it through a glass of glue or pierce a jar of glue. This can be done with a needle.

Next, we take the ball and draw a circle on it for the hole for the light bulb, while we wrap the ball so as not to touch this circle. After that, we leave the ball for a while so that the glue dries well and the structure does not deform when air is released from the ball. Next, we insert a cartridge from an old lamp into the hole and fasten the resulting product to the ceiling.

Another unusual way to decorate a lampshade is crochet it... To do this, you need a base for a lampshade, yarn, crochet hook, glue. According to the knitting pattern, knit two openwork products of the required size and completely circle the frame of the lampshade. Patterns can be varied.

For an even look, apply a mixture of water and glue, diluted in equal proportions. While drying, you can shape the lampshade in any shape. Next, install it on a floor lamp or lamp.

And in order to make a wicker lampshade with your own hands, get a frame from an old lamp in a retro style. This element will make your interior unusual and highlight its dignity. For making, you will need threads, glue and a spray bottle. Wrap the base of the lampshade with arbitrary and uncomplicated movements.

Make sure the threads are tightly wrapped. After that, dilute the glue with water and spray from a sprayer onto the threads so that after drying they keep a certain shape.

Manufacturing jute lampshade will be a great idea for those who want to decorate their home. To do this, you need jute thread, glue, wire, decorative leaves. First you need to make a shade template that will match the lamp frame. We fasten screws or nails to the finished template. Then we pull the thread along the contour of the layout and drag it vertically along the entire contour. Next, we do the weaving horizontally and process it with glue.

Immediately after drying, remove the product from the model and glue the side parts. In order to decorate the lampshade, take decorative ivy leaves and attach them with wire to the base of the lamp. Such a lamp will create a fabulous atmosphere in your home.

From fabric

First you need to choose the fabric for the lampshade. It can be fabric of any density and rigidity. The choice of material will depend on what the lamp frame is made of, but preference should be given to dark fabrics rather than transparent ones, as this will be more practical.

Use blue or green fabrics to keep the light emitted cool, and yellow or reds for cool light.

If the base for the lampshade is made of wire, paint or tape should be applied to it so that the fabric does not deteriorate over time. You can sew the product by hand or on a sewing machine. You will also need an iron, pencil, tape measure, thread, and glue.

First you need to take measurements and cut out a template that will fit the frame of the lampshade. Next, cut out a pattern according to the template and match the threads to the fabric. We sew the details on the sewing machine and then smooth them with an iron. The next step is to glue the product to the base of the lamp. In this case, you need to carefully hide the seams, tightly fitting the frame. It is enough to dry the finished lampshade and put it on your lamp.

It can fit very interestingly into the interior a lampshade made of burlap. Such fabric transmits light well. Its main feature is that it can be decorated with some decorative details, buttons, beads, artificial flowers or openwork lace. You can also write on the burlap with special paint.

Another idea of ​​\ u200b \ u200bmaking a lampshade will appeal to many. It will be executed in the form flared lampshade in a cylindrical shape. You can choose any fabric to match the color of your furniture or sofas and armchairs. You don't have to worry about the density of the fabric, as you can make it stronger with glue or starch.

Measure the diameter of the base of the shade frame at the bottom and top, as well as its height. Next, make a pattern on the fabric with some margin of a couple of centimeters according to the measurements that you took from the lamp frame.

Any decorative element can decorate such a lampshade, for example, simple bows and ribbons will do.

You can also stretch thin fabric in dark colors over the luminaire frame. But its peculiarity will be that on the inside there will be cardboard in which you can cut various shapes. It can be various butterflies, animals, plants. The main thing is that the cut out silhouettes can be easily distinguished when the light is on, which will come from your lamp. Thus, we get an original lamp and a kind of play of shadows.

Decorating ideas

If the lampshade looks very boring and inconspicuous, it can be decorated in an original way. Next, we will consider interesting solutions that can help in transforming your lamp. This will require a thick fabric or colored scraps. For example, if you decide to decorate your lamp in the Provence style, then you will need a fabric of blue, light green, pink, since this style is characterized by pastel colors, a checkered or floral pattern.

In order to start making a lampshade, pick up a suitable fabric for it and cut out two strips. From one, make a bow for the upper part of the lamp base, and sew lace or braid to the other strip. The fabric can be decorated with various beads, buttons or trimmed with sequins. Remember to trim the edges of the fabric and attach or sew a second strip around the base of the light. Attach the bow to the top of the lamp in the same way.

You can also use fringe or knitted napkins in decorating, as this will give your lampshade more sophistication and luxury.

Another interesting idea is to decorate the lamp with flowers and leaves made of pastel shades of fabric. You can make roses from ribbons or ordinary chiffon fabric and decorate the entire lampshade with them. Such a lamp will find its place in any room, especially in a bedroom or nursery.

A good idea for decorating a glass lampshade is a photo or picture pasted on it that will glow even in a dark room. You can also apply stained glass paints to the glass or paint it. And from unnecessary scraps, you can make an interesting applique of floral motifs and sew it onto your lampshade.

Agree, a lot depends on the light in the room, at least compare the "cold" hospital and "warm" home light. But not everything depends on the lamp: hand-made lampshades will help to "domesticate" the light. Only in this article, you will receive complete information on how to make a fashionable lampshade quickly, inexpensively, beautifully! Read and enjoy!

How to make a lampshade with your own hands

Before choosing a design and starting to create a lampshade with your own hands, let's dwell on a few important points. So, pay attention to the following points:

1. The greatest freedom will be given by the use of energy-saving or LED lamps, since incandescent lamps are very hot and can burn a paper or fabric lampshade.

2. When reworking the finished lamp, try to handle the wires as carefully as possible, and upon completion of the work, check their integrity.

3. When choosing a lamp, remember that, depending on the color temperature, they are often divided into "cold", neutral and "warm". For a home lamp, “warm” is the best choice.

Differences in color temperature are clear. The higher the value on the package (the temperature is higher), the colder light the lamp will give and vice versa.

A little about the frame

You will need a base for your own lampshade. Often it consists of two rings on which a cardboard or plastic backing is attached to hold its shape.

Such frames can be woven from wire using only pliers.

The frame can be bought at a handicraft store, but since our stores cannot always boast of such a variety, it is worth looking for frames in hardware stores.

Simplest solution: The cartridge holds the neck of a 5 liter bottle.

You can also buy an old lamp at a flea market or make a wire frame yourself.

A ready-made cylindrical frame from a hardware store (metal mesh).

Green lamp ... literally

A special lamp can be used for plants, but a simple "housekeeper" or LED is also suitable.

It will not be difficult to repeat the design with your own hands, especially since it is very easy to change it, based on what materials will be at your fingertips.

The main thing is that in the hanging version the pot is not too heavy (in the tabletop this can be neglected). You also need to insulate the wiring well, you can run it along one of the supporting wires.

10 steps to fabric lampshade

DIY fabric lampshade: master class

The process of creating a fabric lampshade begins with the preparation of everything you need, so that later you will not be distracted by looking for missing parts.

You will need:
- the cloth;
- masking tape;
- measuring tape and plastic ruler;
- chalk (or other material for marking fabric);
- pencil;
- scissors;
- thick self-adhesive film (from a craft store);
- lower and upper wire rings;
- clothespins-binders for paper;
- PVA glue;
- brush;
- threads;
- paper strip.

Step 1

Step 2

Cut out a rectangle of the desired size from the self-adhesive film, and then - a piece of fabric 5-6 cm larger at the edges. Glue the fabric right side down on the table.

Step 3

Select the part of the pattern that you want to leave on the lampshade, and using a ruler and something rectangular (like a book), draw cut lines and corners.

Step 4

Straighten the fabric and start gluing the film onto it. Do not peel off the whole backing from the very beginning: first separate 4-5 cm, glue them. Then at the same time tear off the backing and smooth the pasted part of the film.

Step 5

Attach the lampshade to the frame starting in the middle using binder clips. When you get to the end, turn the lampshade over and start at the other end.

Step 6

Using a pencil, mark the line of contact and write down the side that will be at the top. Next, glue the halves of the lampshade together and let them dry.

Step 7

Flip the lampshade over, apply a thin bead of glue to the edge and insert the wire ring. Secure it immediately with staples, let dry, and then repeat from the other end.

Step 8

Step 9

Also close the seam on the side of the lampshade.

Step 10

Put it all together and enjoy your finished lampshade.

Advice: taking the lampshade given in this instruction as a basis, you can make no less interesting designs, for example: the ever-popular thread lamp.

Lampshade - both a photo album and a map

Marie Darby shared her successes in creating a lampshade - photo frame online. To do this, she writes in her blog, you need a base, for example, such as in the previous section, or a ready-made purchased lamp with a white shade.

You will also need tracing paper (several sheets, you can buy at craft and stationery stores), scissors, glue, a pencil, a ruler and a printer. The result in the photo came from using an inkjet, but you can also use a laser, the main thing is that he does not "chew" thin tracing paper.

You can make a collage from a photo on a computer using Photoshop or another collage maker, such as Picassa. You can collage photos by cutting them out with scissors.

Please note: if you are printing on an inkjet printer, let the ink dry. Also, you need to be careful with tracing paper and not bend it, otherwise the trace from the bend will always be noticeable.

In exactly the same way, you can transfer anything to the lampshade: a child's drawing or a favorite quote, or even a map of your favorite place.

Rope sun

Making a popular openwork lampshade for a lamp is actually as easy as shelling pears. You only need threads (acrylic or natural), glue (PVA or wallpaper), as well as a balloon or ball that can be blown off, and petroleum jelly.

The inflated ball is smeared with petroleum jelly (so that the threads do not stick to it) and begin to wrap with threads previously moistened with glue. When the structure dries, the ball is deflated and removed. That's it, the lampshade is ready!

Advice: before making a "clean copy" - make 2-3 small lamps for testing. Also, on the ball, immediately mark with a marker the place where the threads should not be - through it you will need to remove the ball and insert the cartridge.

Do-it-yourself indoor "night sky"

The pattern on the lampshade can be formed in different ways, each has its own advantages. But in originality, few people can compete with a perforated lamp.

To make one, you just need to prepare the base, along which you will make the first row of holes (outline) with a thin awl. After that, you need to add many smaller holes and secure the perforated blank to the lamp.

How to make a lampshade video:

Knowledge of English is not necessary, everything is clear without words.

As you can see, you don't need a lot of resources or experience to make a lampshade with your own hands (), but the result can be excellent. And if you bring in a male companion who can help you make a good frame, you can consider that it's in the bag.

Original lamps and lampshades with your own hands. Ideas, master classes

DIY lamps and lampshades. Ideas, master classes

Hello everyone!

Creating or decorating lamps and lampshades is not only incredibly interesting, but also quite useful: it allows you not only to create a unique object, and in full accordance with the interior of your home, but also great to save money. It is enough to buy the simplest lamp for little money and beat it to your liking. And there are a lot of options for what and how you can make, in a variety of techniques, using a variety of materials.

I have selected for you and me ideas for creating and decorating lamps, I hope you can choose the right option for yourself :) Enjoy your viewing!

The lampshade is decorated using decoupage technique, the base of the lamp is made of books

The decor of the metal frame of the lampshade with feathers is very stylish :)

Quite often fabric or paper flowers are used to decorate lampshades, the result is very romantic :)

Fabric flowers with candle processing

Calico convolutions are used here as colors.

Twisted fabric flowers

Here are the ready-made flowers

The flower is made of a cotton strip of fabric, strung on one side and gathered into a bud

Spiral roses from newspapers

The bottom of the lampshade is decorated with spiral paper roses

Decor ikeevsky lampshade with paper flowers

Lampshades made of lace and knitted napkins look very beautiful

Shaped with glue

A ball is inflated and lace napkins are applied to it with the help of glue. After drying, the ball is pierced, deflated and removed.

A very beautiful option: a birdcage is used as the base of the lamp, the lampshade is decorated using decoupage technique with aging.

Even an umbrella can be used for a chandelier :)

Even scraps-cuttings of fabrics will go into business: they wound up, tied in a knot. This option will perfectly fit into the design of a country house or a children's room.

Buttons-buttons

For the manufacture of lamps, various glass containers are very often and successfully used - jars, bottles. Below I have given a master class on the manufacture of such a lamp.

A bottle as the base of the lamp - a similar master class is also given below

Here it is a little more complicated - at the bottom on the back of the bottle there is a hole drilled through which the cord is wound.

The lamp is made of shaped metal sheet

Origami technique has been successfully applied to create lampshades

Glued fabric strips on the base of the lampshade

Lampshade made of various retro leaves

Basket lampshade - why not? :)

Second life of a metal colander

Unnecessary forks and spoons created a very interesting version of the chandelier :)

A very nice solution: a metal mesh is stretched over the frame and the poultry house is beaten. For a child's room, I think.

And here's another bird theme :)

Painted lampshade with acrylic paints

Thin veneer lampshade

The base of the lamp is pasted over with seashells

Knitted lampshades - they look very cozy :)

Lampshade decor with memorable photos and slides

The flowers on this lamp are the bottoms of plastic bottles :)

Lampshades are pasted over with paper circles

Vegetable lampshade :) I think the flower is still hot there :)

Lace lampshade

The decoupage technique is also applied here.

A very interesting solution - a wire as an art object :)

Lampshade decorated with strips of fabric

Lamp made of branches

Lampshade decorated with crumpled-squeezed coffee filters (muffin tins)

Glass vase lampshade

The base of the lampshade is unnecessary toy soldiers, glued and painted with spray paint

Creative striped felt lampshade

Ping-pong ball lampshade :)

Floral decor

And many, many different ideas ...

Workshop on making a lamp from a tin with a metal lid by Tom & Brit (bestofinteriors.com)

Punch holes with a nail to create a hole

Insert the cartridge

We paint in one color

We screw in the light bulb and insert it into the jar

The lamp is ready :)

Lamps made of paper from the resource varrell.com

We need a picture of the castle

Cut out, cut through the windows, glue

Place a battery-powered spotlight inside

Rope chandelier by Sarah M. Dorsey (sarahmdorseydesigns.blogspot.com)

We need a rope, Mod Podge glue (can be replaced with diluted PVA), a ball

In order to create a wavy shape, Sarah used wooden slats. We lay out the form, coat with glue for fixing.

After drying, spread on a ball and coat with abundant glue

After drying, remove the lampshade from the ball and paint it with white spray paint - Sarah has four layers

Very beautiful lampshade from grandmother's squares from the author of the resource Aboutgoodness.com

We cover the lampshade with fabric

We bend a strip of fabric in half lengthwise and twist it into a roll

Straighten slightly

Apply glue to the fold and glue to the base

Workshop on creating a base for a lampshade from Kiri (ilikethatlamp.com)

Necessary components

The bottle is thoroughly washed, disinfected and dried

Cover with spray paint

Installation process

,

This is how the gin bottle turned into the base for the lampshade :)

As you can see, the matter is simple enough and very interesting. Give free rein to your imagination, create and let it be beautiful and cozy in your house!

Well, for those who still prefer to buy ready-made lighting fixtures, I recommend looking into a specialized online store Lampa.ua- where high-quality and stylish table lamps, chandeliers, sconces, accessories, etc. are presented in a huge assortment. from the best manufacturers and at very flexible pleasant prices :) By the way, according to Google statistics, this online store is the most popular among Ukrainian buyers :) Use it with pleasure!

I wish you all good luck and good mood !!