What tool is needed to install interior doors? What tools are needed to install doors? DIY accessories for installing interior doors.

It is quite simple to choose and buy the door you like, but to install it correctly is more difficult. For the competent implementation of this process, you need to have all the necessary tools and devices, as well as have some construction skills. Sometimes you may need special equipment - you also need to have it on hand just in case. So, what should be in stock for a high-quality installation of door leaves?

Installing interior doors is a troublesome business and it is not enough to have one door and a pair of screwdrivers to accomplish it. It is also advisable to have a whole set of the necessary tools to do this job efficiently.

So, what are the basic tools needed to install door leaves:

• Drill - it is needed to drill the necessary holes of different sizes, fix the hinges, tighten the screws;
• Puncher - with this useful tool, you can enlarge or level the door span, drill holes for dowels and perform other necessary actions;
• Jigsaw - with its help, the process of removing platbands and accessories becomes simple and easy (mainly used where it is difficult to use a saw);
• Manual milling cutter (plus cutters) - "helps" to prepare places for door hinges and the locking mechanism, removes an extra layer of wood from the door or door frames;
• Miter and circular (circular) saw - these types of saws allow you to make both smooth longitudinal cuts of the material, and at a certain angle;
• Bulgarian - it is used to fit platbands if the walls are very curved;
• Screwdriver with attachments - allows fixing screws and other fasteners.

But in addition to electrical fixtures and equipment, when installing doors, you cannot do without hand tools, such as:

• Normal hammer - needed to hammer nails or other details;
• Construction knife - it is convenient for them to cut off all unnecessary;
• Chisel - perfect for inserting door hinges and other fittings;
• Screwdriwer set - will be needed for fastening various parts;
• Building level - ideal "helper" for checking the flatness of the surface;
• Roulette - measuring tool (preferably using a three or five meter tape).

If there is no screwdriver, it is advisable to have a Phillips and straight screwdrivers in the "tool" box, which will help fix all the necessary elements.

Accessories for installing interior doors

When working with interior doors, you may need not only the main tool, but also any auxiliary devices, as well as consumables.

Additional accessories required for door installation:

• Bubble level - used to measure the angle of inclination of vertical or horizontal surfaces;
• Steel ruler - very convenient for carrying out any small measuring work;
• Checking metal square - may be needed when setting up an electric tool, as well as for measuring angles;
• A gun filled with sealant or polyurethane foam is very convenient when applying sealants;
• Spacers as long as the width of the doorway;
• Pneumatic wedges are special wedges that are air cushions that can be used as supporting ballast while working with the door;
• Simple pencils or markers - do not pick up these devices with a very rigid shaft, otherwise the marks made will be difficult to erase.

In addition to additional tools, it should be borne in mind that you will need various consumables, without which you cannot do the job.

What else do you need to have on hand:

• Chisels and files for a perforator;
• Drill bits;
• Router cutters;
• Grinder circles;
• Masking tape;
• Polyurethane foam or sealant;
• Self-tapping screws for installing a lock, platbands and door hinges.

By the way, there are craftsmen who fix the platbands with finishing or liquid nails, without using self-tapping screws. You can also try in action special micropins, which are attached with a pneumatic gun.

When working with door slopes and plastering, you may need spatulas, brushes or rollers, mortar containers, grouting agents.

Essential tool for tapping locks when installing doors

Engaging in inserting locks into the door structure, you also cannot do without special tools. Some of them have already been mentioned above, but some devices will be discussed for the first time.

So, to embed the lock you will need:

• Vernier caliper - this tool is needed to adjust the depth of the insert of the locking mechanism, as well as to apply the markings for the fittings;
• Roulette - with its help, the places where holes for the lock will be drilled are determined;
• A screwdriver or drill - great for securing the elements of the lock: handles, latches or lining;
• Fraser - will help to prepare holes for the future lock mechanism;
• Hole saw - needed to make holes for the handle;
• Pen drill - you cannot do without this device when cutting holes for the lining and latch;
• Corner cutter for wood drill;
• Ruler, pencil, tape measure, screwdriver set;
• Chisel and hammer;
• Self-tapping screws.

By the way, there are special kits on sale that contain all the necessary equipment for installing locks.

Competent and professional door installation

It often happens that people doubt their abilities and do not risk taking up the installation of doors on their own. In this case, professional work helps. Specially trained people quickly and efficiently install the door, cut the lock, adjust the door leaf.

However, if a person has some carpentry skills, you can try to put the doors on your own, but for this you need to purchase a quality tool. Now you can buy professional kits for such work.

These kits usually contain all the necessary fasteners and supplies that you might need. They also contain very detailed instructions on which a person, even without special knowledge, can do the job.

The advantages of this set:

• Everything you need is at hand;
• The kit is suitable for any kind of door installation work;
• No need to drill through the door frame;
• Many of the elements are flush-mounted;
• The decorative finish of the door will not be affected in the least.

Assembling the door yourself or using the services of a professional - the choice is yours.

Professional tool for installing doors (video)

When choosing a tool, you first need to figure out what work needs to be done. If you want to do everything at the highest level, then it is better to buy professional kits. If the work is one-time and you do not want to spend a lot of money, you can think a little and replace some of the devices with simpler ones. All in your hands!

Buying your favorite interior doors is only half the battle: these structures still need to be installed correctly. The very same installation of interior doors with your own hands is a very painstaking process that requires patience, time, as well as the availability of equipment for installing the structure and the ability to use it.

All kinds of devices for the installation of interior doors should be prepared in advance, because if you purchase equipment as needed, a lot of precious time can be spent on this. In addition, purchasing a tool in a hurry is fraught with a serious danger: it is highly likely that a low-quality mounting kit will be purchased.

In order to clearly understand what tools are needed, you should think over the entire cycle of work, from marking and ending with adjusting the hinges and finishing the door slopes. A standard door mounting kit, numbering a dozen items, will not be able to help in performing all these manipulations. Therefore, it is prudent to prepare tools for installing doors according to a previously thought out list, which should be drawn up taking into account the entire cycle of work.

All the tools necessary for installing interior doors can be conditionally divided into two groups:

• electrical goods;
• hand tools.

1. Perforator.
   During construction, this tool is simply irreplaceable. During the installation of interior doors, it is used to level the opening, drill holes for the anchor dowel, etc.
2. Drill.
   This power tool is used for drilling fastening holes, screwing in screws, fastening hinges. Before starting work, make sure that the drill installed in the drill chuck is firmly fixed. If the drill is not properly secured, it can fly off during operation of the tool and damage the door leaf or harm the craftsman.
3. Electric jigsaw.
   A tool, the main purpose of which during the installation of the door structure is to perform a wave cut of the platbands.
4. Bulgarian.
   With a strong curvature of the wall, the platbands are adjusted with its help.
5. Fraser.
   Use this tool for cutting hinges and door locks.
6. Electric planer.
   Such a tool is used to fit trims and fittings.

Hand tool

1. Marker or pencil (it should not be too hard, otherwise it will leave indelible marks on the lacquered surface of the door leaf or platbands).
2. Roulette (it is advisable to use a measuring device of 3 or 5 meters).
3. Caliper with a depth gauge. This door fitting tool is used to measure the depth of a door lock, mark for fittings, and more.
4. Chisels. They are used for inserting hinges and other accessories.
5. Bubble level (optimal length - 50 cm).
6. Steel measuring ruler.
7. Checking metal square. This device is used for checking angles as well as adjusting an electric tool.
8. Mallet and hammer.
9. A set of screwdrivers is needed to install hinges, awnings, locks, etc.
10. Miter box as well as saw.
11. Foam gun.

Consumable material

A set of consumables is represented by the following names:

• lances and chisels for a hammer drill.
• lobe end circles.
• files for a jigsaw.
• cutting wheels installed on the grinder.
• drills.
• masking tape.

In addition, self-tapping screws are needed to install the hinges, door lock and platbands.

Equipment

Often, interior doors offered to the attention of the buyer are sold without hinges and locks: this hardware will need to be purchased separately.

Additional accessories

Additional work associated with the installation of interior doors includes the adjustment of the hinges and finishing the slopes.

In the course of adjusting the hinges, the tightness of the door leaf to the frame is checked and, if necessary, the fasteners are either tightened or loosened with screwdrivers. To complete this stage of work, you only need a set of screwdrivers.

For plastering slopes, you will need a kit, which includes the following devices:

1. spatulas;
2. container for solution;
3. master OK;
4. a set of brushes and rollers;
5. grout kit.

Of course, it is best to use professional equipment to install interior doors: it is tested and reliable, and therefore serves as a guarantee of high-quality work. Unfortunately, the cost of such a tool is too high.

Therefore, DIYers often have to make this difficult choice between expensive professional equipment and an amateur kit that does not require large expenses.

In order for the process of installing interior doors to be successful, it is important to choose the right tool for its implementation. There are many tools available today to make work easier. The presence of some of them is optional, but in any case, you cannot do without a certain set.

The right set of tools will greatly simplify the door installation process

Features of installation work

In order to understand what tools you need to install interior doors, you should understand the very process of these works.

It may seem like a very dusty job to first experience. In fact, with the proper organization of work and the use of auxiliary devices, the amount of dirt can be reduced to a minimum.

The whole process can be broken down into several stages:

1. Removing the old structure. If necessary, the canvas is removed and the old frame is cut out.
2. Installation of the box. After preliminary assembly and adjustment, the new box is fixed in the opening. Then all the gaps are foamed.
3. Opening decoration. Excess foam is cut off, the gaps are plastered and covered with platbands. Slopes are drawn up separately.
4. Installation of doors and fittings. The hinges and the lock are inserted, the canvas is hung on the frame. Handles and additional fittings are also attached.

The main stages of installing an interior door

Necessary materials

In order for the installation work to be successful and not take much time, you need to prepare all the necessary materials in advance and stock up on tools for installing the doors. Speaking specifically about consumables, the following can be distinguished:

• Polyurethane foam.With its help, the gap between the wall and the box is filled, as well as sound and thermal insulation, shock absorption under changing environmental conditions and reliable adhesion between materials are provided.
• Headless nails.Basically, this is a way of joining frame parts and with minimal visual defects.
• Putty.It is used to mask defects on the wall, as well as to create a protective layer for foamed joints.
• Serpyanka.Required for particularly difficult areas to be plastered, especially when it comes to depressions and wide joints.
• Metallic profile.It is necessary for removing even corners when finishing slopes.
• Drywall.Another material that allows you to tidy up the slopes in the opening.
• Wooden wedges.These are auxiliary materials for fixing the position of the box, installed between the wall and the frame before foaming the gaps.
• Spacers.Hold the frame in position while expanding and drying the foam.
• Dowel.Hammered into the wall to fix the position of the mounts.
• Bolts.The main fastener for.
• Glue. Allows you to fix platbands and slopes without using nails.

List of materials required for door installation

Required tools

In order to work with the above materials, you must have at your disposal certain tools for installing doors. There is a list of mandatory tools, without which it will be impossible to carry out such installation work:

• Roulette.This is the main measuring tool, without which it is impossible to carry out any construction process.
• Level.Allows you to check the correctness of the position of an element both vertically and horizontally.
• Saw.It is used for cutting the elements of the box, add-ons, platbands, etc. For metal, it is better to use a grinder.
• Drill.Allows you to make holes in the wall for further fastening of the opening design elements, as well as in the door itself when installing the fittings.
• Chisel.It is used to remove a layer of material when inserting hinges, a handle or a lock.
• A hammer.It is used for fixing platbands and adjusting patch elements.
• Putty knife... With its help, plaster is applied and leveled when finishing the opening.

Basic tools needed to install an interior door

What other additional tool might be needed to install an interior door? The following devices can be distinguished:

• screwdriver;
• jigsaw;
• trowel for plaster;
• construction mixer;
• nippers.

In case you do not have the entire arsenal of tools that are needed to install doors, some tools can be interchangeable, for example, a screwdriver and a screwdriver or drill.

If you want to achieve the perfect result without undue effort, prepare a maximum list of the described devices. Nevertheless, if you have knowledge and skill, you can get by with a minimum number of tools and this will not negatively affect the final work.

Sections of the article:

When planning renovation work in your home, great attention should be paid to the installation of interior doors. It is not enough to choose good quality doors. It is necessary to install them correctly so that the purchase will please for many years. Many who have encountered the installation problem note that the process is quite painstaking, requires perseverance and a certain skill. It is better to prepare a set of tools for installing interior doors in advance. You should think about what specific tools can be useful, what is already available, and what needs to be purchased.

The standardized set of tools includes more than ten different items, but this list is not always exhaustive. The easiest way is to prepare a list of tools that you may need. In the list, you need to divide the instruments into groups. As an example, one group might include a power tool and another a hand tool. Using a large number of specialized tools will allow you to do the job efficiently and as quickly as possible.

What is the principle to follow when choosing a tool?

First of all, it is required to assess the scope of work and determine the list of tools, as already mentioned above. Thanks to such foresight, it will be possible to save a lot of time: you do not have to go to the store in the process of performing the work, because this can make them endless.

In addition, preliminary preparation will allow you to purchase a better quality instrument, to think carefully about the choice, to avoid a senseless waste of nerves and funds. If you choose a tool in a hurry, you can buy low-quality devices that will fail very soon.

Those tools that are in the house should be checked - they work or not. Equipment that has been idle for years can fail, rust, and stop working. In order to more accurately compile a list of everything you need, you need to mentally imagine the amount of work that lies ahead. Let's give an example.

It is necessary to replace the doors installed earlier, respectively, the dismantling of the box is required, since the new box must be installed in the prepared opening, and the slopes will need to be repaired in the walls. For such work, you will need many different devices. If it is not required to remove the box for installation, the whole procedure will be much simpler and will require a small number of fixtures.

In addition to the tool, you should think about the materials that you may need in the process of performing the work. These can be materials such as screws, nails, drills for drills, electric saws, etc.

All this will definitely be needed, therefore the planning stage is very important, it will make the installation of doors as simple and pleasant as possible.

Power tool you may need

For comfortable work, you will need a power tool that is designed to simplify the door installation procedure. In addition, the use of various electrical specialized devices will significantly speed up the work and make it better.

So, consider the required power tool:

Miter saw. This device allows you to cut various materials with the required angle. You can cut various elements of the box (for example, when joining the bars), platbands. In addition, such a saw can be an excellent replacement for a jigsaw, because it allows you to cut longitudinally.

Fraser. Allows you to make cutouts for the lock both in the front and back of the canvas, and from the end. It is also suitable for cutting wood for hinges.

Electric jigsaw. In order to cut various materials longitudinally without unnecessary hassle, a jigsaw is useful. Can be used instead of a miter saw.

Electric drill. To pre-drill holes for self-tapping screws.

Screwdriver. Needed in order to mount various screws. In addition, a good screwdriver is quite capable of drilling holes using special drill bits.

Perforator. Allows you to drill holes in walls made of hard materials that a screwdriver will not take. It can be concrete or brick. It can be used to knock down excess mortar / concrete from the doorway.

This is a list of those door installation tools that are likely to be needed in any situation. The purchase of most of them is fully justified, since they will definitely come in handy on the farm. For example, with the help of a screwdriver, you can always easily tighten any bolt, and a punch is needed in order to hang a picture or a shelf on a load-bearing wall.

Required hand tools

What hand tools are needed for a high-quality and correct installation of interior doors?

Consider the basic tools that will definitely come in handy:

Chisel. Its use will allow you to prepare places for the installation of door hinges and a lock, as well as its counterpart. Can replace a router in the absence of the necessary budget for its purchase.

A hammer. Anyone knows the purpose of this important household tool. It can be used to hammer in any fasteners. When installing doors, you will need it if you need to nail the platband.

Plumb line or level. With their help, you can install the door frame in such a way that in the future the canvas does not sag. Without them, the installation will not be completed, since the box will not be installed evenly.

Saw. For trimming any timber construction elements. Since the tree is not too thick, a regular hand saw will suffice to cut it.

Scrap (mount). Without this important tool, it is impossible to remove the old door frame. With the help of scrap, you can make this procedure quickly and easily.

A device for extruding polyurethane foam (gun). When foaming a box, this device will definitely come in handy. Otherwise, the procedure cannot be carried out.

Screwdriver. Suitable as a replacement for a screwdriver in the absence of funds for it. It is better to stock up on a set of screwdrivers, or a large number of special nozzles, so that it is always easy to choose the required size for the screws.

Miter box. Allows you to cut wood at an angle, possibly useful when connecting door frame elements.

Using these tools, you can easily complete the door installation procedure, which consists of several steps:

• Dismantling the old door frame;
• Placement of the door block;
• Installation of accessories on the canvas;
• Installation of the box in the doorway;
• Adjustment;
• Hanging the canvas on the hinges.

Hand tools are not very expensive, electric ones are more expensive. It should be understood that tools are bought for a long time and can last a lifetime (with proper care).

How to install doors economically?

It is already clear that without a quality tool it is impossible to properly complete the door installation procedure. Of course, it is better to make the choice towards professional quality tools, but this will inevitably entail certain material costs. However, if you don't use a good tool, the results are likely to be disappointing. Currently, there are many companies on the market that rent out various fixtures for repair. For little money, you can get all the necessary set - both manual and electrical devices.

When installing doors, you can use various tricks. For a better installation of any fasteners, it is better to pre-drill holes for them using a drill or screwdriver. Both the drill and screwdriver allow you to tighten screws and bolts at impressive speeds. It is better to use a drill and screwdriver with a comfortable handle, since this allows you to protect yourself from possible injuries, and an expensive door from damage.

In cases where a veneer or PVC door is installed, it is better to use a router. A pneumatic gun can be used to fix the platbands.

So, tools for installing interior doors can help you complete the job quickly and efficiently. You should not neglect their use, since it was the tools that allowed man to become the dominant species on planet earth.

We can begin preparatory work before installing a metal door and consider a list of basic tools and materials that may be required to complete this work.

The selection of the tool depends on which door fastening option you have chosen and on the installation location (wooden house, stone house or apartment). To install doors in a stone house and an apartment, you will need the same tools; for installation work in a wooden house, slightly different tools and materials are used.

Front door dismantling tools

In the event that the work on installing a new front door begins with carrying out, then first we will consider the main types of tools that may be required to perform this work: